Database Info

Sense 4 based ROMs do not start

Hello everyone!
I recently tried to test AOKP and MIUI roms, so i installed them and flashed the boot.img. After I did so, I wanted to go back with a nandroid backup, but the ROM didn't started. Since i read in the MUIU thread that you have to flash the boot.img to start this rom correctly, I flashed the boot.img of the Noble ROM (which I'm using currently), but it didn't help. Even reflashing Noble ROM did not work. So now i have to use AOKP to run the phone, but I want back to Noble Sense 4.
Is there someone who can help me with this?
Thank you in advance
Holger
Sorry for my bad English but I'm no native speaker

Fullwipe, then flash your ROM

Thank you for your advice,
but this didn't work. The ROM gets stuck at the boot animation.
Logcat outputs always the same sequence...
I don't know what to do.
Is there any other method?

But you wiped in recovery right? (data,system,cache)

Data, System, Chache, Dalvik cache, even battery stats.
AOKP starts properly...

Download my Sense 4.0 ROM and flash the boot.img that's inside then boot into recovery do a full wipe then flash my ROM.

Yeah what he said ^^^
you have to use the boot.img for which ever ROM you want to flash.. E.G - You cant flash boot.img from a ROM based on 1.70/8 RUU if the ROM you want is based on a 1.53 RUU..... or vice versa, you catch my drift.

Did this already as mentioned in the first post ... Didn't work. Cannot start Noble ROM, but AOKP

You got bootloader unlocked ?
perhaps you should ask in the AOKP ROM thread...
or the long way is to run RUU and start from the start

azzledazzle said:
Yeah what he said ^^^
you have to use the boot.img for which ever ROM you want to flash.. E.G - You cant flash boot.img from a ROM based on 1.70/8 RUU if the ROM you want is based on a 1.53 RUU..... or vice versa, you catch my drift.
Click to expand...
Click to collapse
I catch your drift homie.

Ha! It worked after the third try Finally, my nandroid backup boots correctly ^^ thank you for all the help

[S4] Flashing from CM10 to TrickDroid 7.1 does not work

Hey Guys,
yesterday I wanted to revert my ROM from CM10 to TrickDroid 7.1. In TWRP 2.2.1 I wiped caches and did a factory reset and then flashed TD 7.1 following torxx's instructions (wipe, install ROM, flash boot.img with his boot flash script, let the ROM boot). After the reboot the phone hang. The startup sound came through but then no further action for about 7 Minutes.
Was that too little time waiting? Or is there any other issue interfering the boot process after reverting from Android 4.1.1 to 4.0.4 Sense?
If anyone can help is much appreciated. Even if I look stupid afterwords
Burkhard

herzbert said:
Hey Guys,
yesterday I wanted to revert my ROM from CM10 to TrickDroid 7.1. In TWRP 2.2.1 I wiped caches and did a factory reset and then flashed TD 7.1 following torxx's instructions (wipe, install ROM, flash boot.img with his boot flash script, let the ROM boot). After the reboot the phone hang. The startup sound came through but then no further action for about 7 Minutes.
Was that too little time waiting? Or is there any other issue interfering the boot process after reverting from Android 4.1.1 to 4.0.4 Sense?
If anyone can help is much appreciated. Even if I look stupid afterwords
Burkhard
Click to expand...
Click to collapse
Perhaps your hboot does not allow flashing or boot.img? Have you tried the fastboot method of flashing boot.img? How about reverting to a nandroid of a sense based ROM, then flashing TD?

el_smurfo said:
Perhaps your hboot does not allow flashing or boot.img? Have you tried the fastboot method of flashing boot.img? How about reverting to a nandroid of a sense based ROM, then flashing TD?
Click to expand...
Click to collapse
Prior to CM10 I was on latest stock ROM. Before that I had custom ROMs. HBoot on my phone after the OTA update is 1.14. Flashing the boot image of CM10 was no problem.
In order to use the phone I reinstalled CM10 and it works.
The boot images were flashed within fastboot. I do not know any other way to flash a boot image.
I dont have a nandroid backup.

Checked MD5?

torxx said:
Checked MD5?
Click to expand...
Click to collapse
They correspond.
If nothing else helps I will try to install the latest RUU and then flash a ROM. But I wanna circumvent the relock and unlock procedure.
Btw: Did anybody notice that the unlock code changes after an update of HBoot? Nobody mentioned that when the new base was released.

Same here... But fine now
herzbert said:
They correspond.
If nothing else helps I will try to install the latest RUU and then flash a ROM. But I wanna circumvent the relock and unlock procedure.
Btw: Did anybody notice that the unlock code changes after an update of HBoot? Nobody mentioned that when the new base was released.
Click to expand...
Click to collapse
Hey there,
I was having the same problems as you messioned. I flashed the boot.img through fastboot myself and some how it then worked Did not have an problems with flashing the boot.img before. But maybe its worth a try.

Of course you need to use fastboot!!

Did not try yet to flash the RUU. There was an update of CM10 yesterday. The heavy battery drain is gone with this update and there is no urgent need to go back to TrickDroid right now.

herzbert said:
Prior to CM10 I was on latest stock ROM. Before that I had custom ROMs. HBoot on my phone after the OTA update is 1.14. Flashing the boot image of CM10 was no problem.
In order to use the phone I reinstalled CM10 and it works.
The boot images were flashed within fastboot. I do not know any other way to flash a boot image.
I dont have a nandroid backup.
Click to expand...
Click to collapse
HBoot 1.14 is the problem. Anything above 1.09 needs special steps to flash unlike simply flashing with twrp as with 1.09 and below.
Sent from my HTC VLE_U using Xparent SkyBlue Tapatalk 2

LikeaG2root said:
HBoot 1.14 is the problem. Anything above 1.09 needs special steps to flash unlike simply flashing with twrp as with 1.09 and below.
Alright, so, what are these special steps? Can you tell? If its not flashing the within recovery and push the boot.img via fastboot to the phone I would be very interested. My previous HBoot version was 1.13. Flashing ROMs was never a big deal. Also not going to CM9 and back to sense based ROMs.
Click to expand...
Click to collapse

I am on hboot 1.14 and it worked via fastboot. Like you mentioned yourself you reinstalled CM10 and it booted, therefore your previous flash of the boot.img didn't work. So just flash the boot.img via bootloader and fastboot and you should be good...

HighRoIIer said:
I am on hboot 1.14 and it worked via fastboot. Like you mentioned yourself you reinstalled CM10 and it booted, therefore your previous flash of the boot.img didn't work. So just flash the boot.img via bootloader and fastboot and you should be good...
Click to expand...
Click to collapse
I did also flash the boot.img via fastboot. Why do you say that anyway? Is there another method to flash a boot.img?

you didn't mention wiping System as part of the full wipe--needs done

Partially solved
rugmankc said:
you didn't mention wiping System as part of the full wipe--needs done
Click to expand...
Click to collapse
Right, I did not mention it because system is wiped by TWRP during flashing the ROM. So there was no need to wipe it seperately. But maybe my mistake was not to wipe data and the new "asec" folder messed things up.
I'll never know because yesterday I did a complete wipe including the SDCard. Afterwards I was able to install TrickDroid flawlessly.
Thank you all for your efforts.

Viper XL and boot.img

Hey guys I just wanna to check and make sure I'm doing everything right before I flash cause I don't need anymore paperweights
1.I have successfully unlocked my bootloader and installed twrp recovery and rooted.
2. Now I want to back up my entire setup: rom, apps, setting, data, everything so that if I ever want to return to stock then I can. I have booted into twrp and ran backup and selected all options. Is that how you perform a nandroid backup in twrp or is there more to it?
3. I want to install team venom viper xl rom. Do I have to first flash boot.img first or is the kernel the same in stock and viper xl so that isn't necessary? Do I have to do I factory reset first or what?
I'm still new to this stuff so please bear with me. Thank for all your help!!

ImagioX1 said:
Hey guys I just wanna to check and make sure I'm doing everything right before I flash cause I don't need anymore paperweights
1.I have successfully unlocked my bootloader and installed twrp recovery and rooted.
2. Now I want to back up my entire setup: rom, apps, setting, data, everything so that if I ever want to return to stock then I can. I have booted into twrp and ran backup and selected all options. Is that how you perform a nandroid backup in twrp or is there more to it?
3. I want to install team venom viper xl rom. Do I have to first flash boot.img first or is the kernel the same in stock and viper xl so that isn't necessary? Do I have to do I factory reset first or what?
I'm still new to this stuff so please bear with me. Thank for all your help!!
Click to expand...
Click to collapse
Wipe flash Rom flash boot IMG sit back enjoy

ImagioX1 said:
Hey guys I just wanna to check and make sure I'm doing everything right before I flash cause I don't need anymore paperweights
1.I have successfully unlocked my bootloader and installed twrp recovery and rooted.
2. Now I want to back up my entire setup: rom, apps, setting, data, everything so that if I ever want to return to stock then I can. I have booted into twrp and ran backup and selected all options. Is that how you perform a nandroid backup in twrp or is there more to it?
3. I want to install team venom viper xl rom. Do I have to first flash boot.img first or is the kernel the same in stock and viper xl so that isn't necessary? Do I have to do I factory reset first or what?
I'm still new to this stuff so please bear with me. Thank for all your help!!
Click to expand...
Click to collapse
Different kernel. it is using the 2.41 RUU. So go ahead and flash the boot.img
Here's what you should do for any new ROM with a different kernel.
Wipe System
Factory Reset
Flash boot.img
Flash the ROM
flash gapps (if AOSP based)
reboot and have fun
When doing a nandroid backup, it is only necessary to backup
System
Data
Boot

Ok thanks for your response but I'm still a little confused. First did I back up my current rom properly so that I can return to it later on? Secondly does viper and boot img have to be flashed or can they be installed from sdcard via twrp? If they have to be flashed whats the fastboot command.?

ImagioX1 said:
Ok thanks for your response but I'm still a little confused. First did I back up my current rom properly so that I can return to it later on? Secondly does viper and boot img have to be flashed or can they be installed from sdcard via twrp? If they have to be flashed whats the fastboot command.?
Click to expand...
Click to collapse
You backed up fine, it just takes up a little more space.
You have to extract the boot.img from the ROM and put it in the same folder as fastboot.exe
open command prompt, and navigate to the folder fasboot.exe is in and do the following command
fasboot flash boot boot.img
If it gets stuck at waiting for device, reboot into your bootloader, boot into fastboot from there. and then try again.

ImagioX1 said:
Ok thanks for your response but I'm still a little confused. First did I back up my current rom properly so that I can return to it later on? Secondly does viper and boot img have to be flashed or can they be installed from sdcard via twrp? If they have to be flashed whats the fastboot command.?
Click to expand...
Click to collapse
Viper is the Rom u flash it from twrp it's. azip file that's fkashable so make it easy and flash viper there and than flash the boot IMG from fastboot the command is all over the forums I thinks it fastnoot flash boot.img

don't be confused. read.
you always have to flash boot.img in fastboot "fastboot flash boot boot.img" then flash the zip in twrp make sure to wipe, and don't download international roms. you still have to flash the boot.img from your backed up rom.
like a hundred threads asking the same stuff because no one wants to read

DvineLord said:
don't be confused. read.
you always have to flash boot.img in fastboot "fastboot flash boot boot.img" then flash the zip in twrp make sure to wipe, and don't download international roms. you still have to flash the boot.img from your backed up rom.
like a hundred threads asking the same stuff because no one wants to read
Click to expand...
Click to collapse
I'm sorry but I did read. I saw that if you have the same kernel as that of the rom you're flashing you don't have to flash boot.img. So I asked to see if stock and viper have the same kernel. I don't want to flash anything that will brick my phone.
Now one more question if you don't mind answering. I also saw that you can't downgrade RUU. So if viper is based on 2.41 RUU and stock is 2.20 RUU then will I be able to go stock after flashing viper?
I really do appreciate yalls help. i would be where I am if it weren't for you.

ImagioX1 said:
I'm sorry but I did read. I saw that if you have the same kernel as that of the rom you're flashing you don't have to flash boot.img. So I asked to see if stock and viper have the same kernel. I don't want to flash anything that will brick my phone.
Now one more question if you don't mind answering. I also saw that you can't downgrade RUU. So if viper is based on 2.41 RUU and stock is 2.20 RUU then will I be able to go stock after flashing viper?
I really do appreciate yalls help. i would be where I am if it weren't for you.
Click to expand...
Click to collapse
Yes. Just wipe you system and do a factory reset , and flash the boot.IMG for 2.20 and then flash the Rom.
If you want true stock 2.20 then you will have to relock your bootloader and then run the 2.20 RUU. You would only want to do this if making a warranty claim or something. If you want stock rooted, then yes, do what I said above
Sent from my HTC One XL using xda app-developers app

absolutelygrim said:
Yes. Just wipe you system and do a factory reset , and flash the boot.IMG for 2.20 and then flash the Rom
Sent from my HTC One XL using xda app-developers app
Click to expand...
Click to collapse
Ok got it. I do appreciate your help. Flashing now.

downgrading only refers to the ruu not the zipped roms. so you can't run 1.85 ruu after running 2.20 ruu/ota but you can still flash a rom based on 1.85.
if you are reflashing the same rom you don't have to reflash boot.img but if you are flashing a new rom then you need to flash boot.img. 7-zip will tell you the crc32 of files so you see tell if it's a different checksum.

Viper Xl's great. Seems to be slightly slower than stock on some task, but the lack of bloatware, and the extensive customization is worth it. Haven't found any bugs or nothing so far. If anyones familiar with viperxl though what is the last app in the app drawer? Its got a chinese name? When it loads it says Dolby Surround but all the writing is in chinese?

ImagioX1 said:
Viper Xl's great. Seems to be slightly slower than stock on some task, but the lack of bloatware, and the extensive customization is worth it. Haven't found any bugs or nothing so far. If anyones familiar with viperxl though what is the last app in the app drawer? Its got a chinese name? When it loads it says Dolby Surround but all the writing is in chinese?
Click to expand...
Click to collapse
That's because you flashed the Voodoo mod, it's apart of the mod, theres a chinese part and a english one called "Dolby Digital" or "Dolby Surround"

When I flash ViperXL 3.1.0 JB do I need to flash a radio too? My phone has hboot 1.4 and software 2.2, so I understand that I cant flash radio with hboot 1.4? Does this mean I need to downgrade my hboot/software version?

CrossFire78 said:
When I flash ViperXL 3.1.0 JB do I need to flash a radio too? My phone has hboot 1.4 and software 2.2, so I understand that I cant flash radio with hboot 1.4? Does this mean I need to downgrade my hboot/software version?
Click to expand...
Click to collapse
Most people have good luck w/out flashing another radio.

ronnie498 said:
Most people have good luck w/out flashing another radio.
Click to expand...
Click to collapse
Hmm. Might there be a patch I'm missing out on? I just flashed one file -ViperXL 3.1.0 JB - Android File Host (692MB)
edit- Works now after another reinstall installed boot image first this time.

Please help i have a question

Can anyone say me if can get back to ics 4.04 stock AT&T ROM with THE Ruu on this post http://forum.xda-developers.com/showthread.php?t=1814217 (The ruu on this post is 2.20 or something like that)
im on Newts JB 2.0.1 Android 4.1 and i got 3.17.707.1 Ruu (i think )
Another question Im on android 4.1 Can i just flash the boot.img of an ICS Rom and flash it and then ill be on ics Or it´s impossible to downgrade?
Please answer I dont want to fu**k up my phone
Sorry for my grammar im from mexico

Please answer !! Thanks in advance

jesusitox12 said:
Please answer !! Thanks in advance
Click to expand...
Click to collapse
All you need to do is full wipe and flash an ICS rom + its boot.img, no need for an RUU. but why would you want to downgrade?

utkaar099 said:
All you need to do is full wipe and flash an ICS rom + its boot.img, no need for an RUU. but why would you want to downgrade?
Click to expand...
Click to collapse
Well first thanks for answering ..!! second i want to downgrade because when updating to JB the gyroscope stops working .. and it wont work on some apps ... im will try this ics rom if i dont like it im back with JB thanks for the answer!

You might just try another JB custom ROM, if its JB you want. I'm on ViperXL, and was also briefly on stock rooted JB, and haven't had any gyro problems that I can tell.
Of course ICS is solid too, and in my opinion, the changes in JB are not that significant (and not worth it, if its causing you problems). Flash any ICS custom ROM same as you would a JB custom. No need to downgrade hboot or anything (as you need to do on some devices, if that was what you were thinking).
Make sure you've done the following, regardless of whether you flash an ICS or JB custom:
Factory reset in TWRP (not in hboot, as it will corrupt the SD)
Wipe cache and dalvik
Flash ROM
Flash boot.img in fastboot, if needed for the custom ROM
Don't restore any system settings or data using Titanium

Cool I found my answers here as well. Patience in reading helps lol. Thanks all
Sent from my HTC One X using xda premium

Thank you i decided to go on another JB Rom and well i found one i actually like is not overmodded its clean And everything works Now i can take my photosphere pics Haha thanks to all

back up/restore

I have h-boot 1.14 withe twrp recovery, I backed up my phone with a previous rom i had and my question is would I have to install the image again after i restore the phone or should the phone restore without any problems.

cal4877 said:
I have h-boot 1.14 withe twrp recovery, I backed up my phone with a previous rom i had and my question is would I have to install the image again after i restore the phone or should the phone restore without any problems.
Click to expand...
Click to collapse
Most of the time yes you will have to install the boot .img manually coming from a different base or Rom... But say if you're on viper and your back up is the same base sense Rom you probably wouldn't have to reflash it... But if coming from cm10 or anything else yes

a box of kittens said:
Most of the time yes you will have to install the boot .img manually coming from a different base or Rom... But say if you're on viper and your back up is the same base sense Rom you probably wouldn't have to reflash it... But if coming from cm10 or anything else yes
Click to expand...
Click to collapse
Awesome thanks man, also im currently running nocturnals dirty rom I believe this is a AOKP rom, now if i want to flash another AOKP or any other CM10 base rom wouldnt the image be the same? or the i have to flash another image of the rom aswell?

cal4877 said:
Awesome thanks man, also im currently running nocturnals dirty rom I believe this is a AOKP rom, now if i want to flash another AOKP or any other CM10 base rom wouldnt the image be the same? or the i have to flash another image of the rom aswell?
Click to expand...
Click to collapse
Be safe and flash it

Is it necessary to reflash rom before restore or can you just fastboot flash boot.IMG and just restore backup?
Sent from my One X using xda premium

I believe you have to flash boot. IMG and than restore according to the comments up there

I just wish we had to option to downgrade the software/hboot without going thru all those steps listed, I remeber i had the htc inspire and you will be able to downgrade hboot by choosing a downgraded version of Ruuu files.

cal4877 said:
I just wish we had to option to downgrade the software/hboot without going thru all those steps listed, I remeber i had the htc inspire and you will be able to downgrade hboot by choosing a downgraded version of Ruuu files.
Click to expand...
Click to collapse
Yeah I loved the inspire that's what got me into android... But I got my phone on hboot 1.09 I've never done the downgrade process but I heard it can be pretty simple