Can I flash back to TW from the 2.3.3.0 recovery or would I need to revert back to the previous TWRP.
Sent from my SCH-I535 using xda premium
nativesmiley said:
Can I flash back to TW from the 2.3.3.0 recovery or would I need to revert back to the previous TWRP.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
You come back to TW at your own risk. This where most bricks happen. Best practice is to Odin back to stock and then come back to TW. Luckily you survived CM so far but flashing back to TW could cause a problem. If you don't want to Odin first wipe all partitions till raw and give it a shot.
ok just to clarify....Say I was on Synergy then flashed CM 10.1 now I decided I wanted to come back to Synergy. I would need to Odin back to stock, then flash Synergy? I just couldn't flash Synergy from Cm 10.1? Is this true for CM10 as well? What about flashing my nandroid backup instead of Odin back to stock?
Thanks
Rudy_Ruettiger said:
ok just to clarify....Say I was on Synergy then flashed CM 10.1 now I decided I wanted to come back to Synergy. I would need to Odin back to stock, then flash Synergy? I just couldn't flash Synergy from Cm 10.1? Is this true for CM10 as well? What about flashing my nandroid backup instead of Odin back to stock?
Thanks
Click to expand...
Click to collapse
you do take the risk anytime you flash anything. HOWEVER, i have SYNERGY, MIUI, and CM10.1 along with Liquid (4.2) on my phone. YOU will have problems with finding your files, as 4.2 will create the 0 folder, and it may look like you have lost files. TWRP 2.3.3 does an excellent job of finding back-ups, or just scroll to find the TWRP folder to find your backups.
Gallery also has been known to "lose" pictures. IMO, they are still there, just have to find them. i've actually opened gallery and had it be empty, but a quick close, and then re-open and they show up. Sort of like it has to find them.
YMMV, make backups of everything, and flash away! just know what chances you are setting yourself up for, and be prepared.
edit: AND... i'm not responsible for anything YOU do to your phone... yada yada yada...
just thought i had to throw that out as well...
:cyclops:
goldsmitht said:
you do take the risk anytime you flash anything. HOWEVER, i have SYNERGY, MIUI, and CM10.1 along with Liquid (4.2) on my phone. YOU will have problems with finding your files, as 4.2 will create the 0 folder, and it may look like you have lost files. TWRP 2.3.3 does an excellent job of finding back-ups, or just scroll to find the TWRP folder to find your backups.
Gallery also has been known to "lose" pictures. IMO, they are still there, just have to find them. i've actually opened gallery and had it be empty, but a quick close, and then re-open and they show up. Sort of like it has to find them.
YMMV, make backups of everything, and flash away! just know what chances you are setting yourself up for, and be prepared.
edit: AND... i'm not responsible for anything YOU do to your phone... yada yada yada...
just thought i had to throw that out as well...
:cyclops:
Click to expand...
Click to collapse
so i can use 2.3.3 to flash between TW and CM right? the last time i went back to TW was when i was on 2.3.2.3 and they were say i had to revert back to the recovery before 2.3.2.3. and with that i never had problems flashing between both ROMs. i just want to know if i can flash between TW and CM with 2.3.3 and not revert back to old recoveries.
nativesmiley said:
so i can use 2.3.3 to flash between TW and CM right? the last time i went back to TW was when i was on 2.3.2.3 and they were say i had to revert back to the recovery before 2.3.2.3. and with that i never had problems flashing between both ROMs. i just want to know if i can flash between TW and CM with 2.3.3 and not revert back to old recoveries.
Click to expand...
Click to collapse
Stay on TWRP 2.3.3. I've been using TWRP 2.3.3 just fine while flashing multiple Beans JB TW builds. Not sure what issues others had but it works fine for me. Also, if you intend to install 4.2 AOSP in the future then you'll have to update TWRP again anyway if you downgraded it.
nativesmiley said:
so i can use 2.3.3 to flash between TW and CM right? the last time i went back to TW was when i was on 2.3.2.3 and they were say i had to revert back to the recovery before 2.3.2.3. and with that i never had problems flashing between both ROMs. i just want to know if i can flash between TW and CM with 2.3.3 and not revert back to old recoveries.
Click to expand...
Click to collapse
yes, you can use TWRP 2.3.3 to flash old backups made with any version TWRP. with no problems.
however, you can NOT flash old backups made with CWM. different system and will definitely NOT work.
:cyclops:
thank you very much guys! appreciate the input!
what is the proper way to flash between TW and CM (10.1) so I dont get stuck in roaming mode again?
Yea I am about to do this to correct me if I am wrong please but we are suppose to Odin back to 4.0.4 stock coming from 10.1 then up grade to stock JB from there
Sent from my SCH-I535 using xda app-developers app
Nopi45 said:
Yea I am about to do this to correct me if I am wrong please but we are suppose to Odin back to 4.0.4 stock coming from 10.1 then up grade to stock JB from there
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
know that if you go the ODIN route, you will have to re-root and re-unlock your bootloader.
if you have the MOST up to date recover (CWM OR TWRP - I prefer TWRP 2.3.3) and you have a backup made of a TW ROM, and are on 10.1 currently, then just clear dalvic, cache, and restore your TW ROM.
however, if you do not have one, then would suggest factory reset and then clean install of TW.
there are always "chances" of issues, mainly the 0 folder, but i've been flashing back and forth between MIUI bV, Synergy, and CM10.1 and only problem i had was when my mobile network got switched, and i had to go back in and change to RUIM/SIM. and that was the only thing.
just know what you are doing and know where to go to get answers to help fix things that may go wrong.
and, "insert legal comments here"... no one is responsible for what YOU do to YOUR phone, except YOU.
:cyclops:
The only bad experiences I've had going from 4.2 to TW is when I only briefly installed 4.2 but didn't get data working. That left me with no data in TW. So I had to odin back to stock then re-root, unlock bootloader and flash.
will i be able to go from CM 10.1 to AOKP 4.2.1 without any issue?
Rudy_Ruettiger said:
will i be able to go from CM 10.1 to AOKP 4.2.1 without any issue?
Click to expand...
Click to collapse
I haven't had a problem going from one 4.2 AOSP rom to another. YMMV tho. Just flash a nandroid before you do it just in case.
Related
Hi all,
I'm sorry about my stupid question but I really don't know nothing about that . I had rooted and flashed my NS and installed the matr1x kernel (very good btw), and now I knew that JB will be available to NS. My question is, need I back to stock kernel to receive the update?
Thanks
Sent from my Nexus S using xda app-developers app
Gnng
You have to understand that installing an OTA (official update) on a rooted device regardless of what kernel can cause problems, as it did with my Nexus S before. I suggest you make a NANDroid backup at all times before you install any ROMs, official or Custom. You can also use Titanium backup and others.
There's still a slight while until the new JB 4.1 comes out. It's suggested that you install a Custom JB 4.1 ROM for your Nexus S as though you don't cause any problems. I think it's OK if you do it with the kernel pre-installed. But people always install the Custom ROM THEN they install the Kernel, I think installing a new ROM always overwrites the kernel, if it comes with it.
EDIT:
In short, wait for the JB Custom ROM and you don't have to revert back to stock kernel, when you do the update it will automatically overwrite. Most Custom ROMs come with Stock/ordinary kernels. So then the user can flash whatever kernel they like in your case, matr1x.
Wish you the best of luck, and I am waiting for the Nexus S JB to come out as soon as possible
Ota binary patches the boot image iirc. So it can get all messed up.
Sent from my Samsung Epic 4G using Tapatalk 2
Yeah, what he said!
MДЯCЦSДИT said:
Ota binary patches the boot image iirc. So it can get all messed up.
Click to expand...
Click to collapse
andezzat,
Thank you very much for the help.
andezzat said:
Gnng
You have to understand that installing an OTA (official update) on a rooted device regardless of what kernel can cause problems, as it did with my Nexus S before. I suggest you make a NANDroid backup at all times before you install any ROMs, official or Custom. You can also use Titanium backup and others.
Click to expand...
Click to collapse
I didn't any backup before flashing a new kernel :crying:, so what can I do now if I want my stock kernel back?? What's a NANDroid (I know that is a tool but how can I do it?) ? Is Titanium bkp easily?
There's still a slight while until the new JB 4.1 comes out. It's suggested that you install a Custom JB 4.1 ROM for your Nexus S as though you don't cause any problems. I think it's OK if you do it with the kernel pre-installed. But people always install the Custom ROM THEN they install the Kernel, I think installing a new ROM always overwrites the kernel, if it comes with it.
Click to expand...
Click to collapse
I prefer wait for stock JB Rom and probaby I'll , but, can I already find some JB ROM?
In short, wait for the JB Custom ROM and you don't have to revert back to stock kernel, when you do the update it will automatically overwrite. Most Custom ROMs come with Stock/ordinary kernels. So then the user can flash whatever kernel they like in your case, matr1x.
Click to expand...
Click to collapse
I don't need to remove the kernel even unroot my cell, alright?
Thank you!!
Gnng said:
I didn't any backup before flashing a new kernel :crying:, so what can I do now if I want my stock kernel back?? What's a NANDroid (I know that is a tool but how can I do it?) ? Is Titanium bkp easily?
Click to expand...
Click to collapse
A NANDroid backup is a internal memory backup. You can create one by booting into Recovery (Power off your phone and Hold Power and Down on your volume buttons.) If you rooted your phone and unlocked your bootloader (that's what you had to do to flash a new kernel), you should be able to load ClockworkMod or TeamWin Recovery and do a backup of your phone.
Gnng said:
I prefer wait for stock JB Rom and probaby I'll , but, can I already find some JB ROM?
Click to expand...
Click to collapse
There's one rom but it's a port from the SDK and the amount of major bugs is high so it's not recommended but you could try another custom rom meanwhile, I can't go back to stock after trying custom roms, like AOKP and Cyanogenmod 9. Make sure you backup your apps and some settings (not everything will be compatible between stock and custom so pay close attention to which system setting you'll backup) with Titanium Backup.
To sum it all up for you
There's a Jelly Bean release which is unstable and has no sound, and will not be fixed until the REAL version comes out.
NANDroid backs up the whole internal memory on the phone including the system, it can be done from clockworkmod recovery.
Titanium backup, backs up specific settings and information that you choose, available from the playstore.
You don't need to unroot or go back to a STOCK kernel in order to flash a CUSTOM ROM. DO not however flash a STOCK rom after rooting, as at times that can cause problems.
If you want to go back to a STOCK ROM after rooting a device, there's a way, check this guide
http://forum.xda-developers.com/showthread.php?t=1063664
and choose your Nexus S model: To acquire model, go to Settings - About - Baseband version. if it says I9023 at the start that's your Nexus S's model
Choose one of the Fastboot Stock ROMs and use the Fastboot method to flash the ROM. That is a good way to go back to STOCK ROM if anything bad happens
By the way you should expect the new OTA official 4.1 update for the Nexus S to be on your model's page.
NOTE: Using Fastboot to flash a ROM is very clean. However this will delete all your data and if you do everything correctly will lock your bootloader and unroot your phone. So use Fastboot only when you really feel the need to.
Cheers
and stay tuned for Jelly Bean :victory:
andezzat said:
To sum it all up for you
You don't need to unroot or go back to a STOCK kernel in order to flash a CUSTOM ROM. DO not however flash a STOCK rom after rooting, as at times that can cause problems.
Click to expand...
Click to collapse
That means, when I receive the official 4.1 update notification, I should unroot my phone first and just install it after?
Gnng said:
That means, when I receive the official 4.1 update notification, I should unroot my phone first and just install it after?
Click to expand...
Click to collapse
OK first off, do not install the update using the system update method from about, as that is a 100% stuff up if you're still rooted or on a Custom ROM.
However to update I think flashing a stock ROM but USING Clockworkmod works fine!
Someone please confirm, as I am not 100% sure
However what I am sure about is that if you run into any troubles installing your STOCK ROM using Fastboot is very very good and clean, however there are 2 things:
1. You will wipe everything COMPLETELY
2. You need the ROM to be in a fastboot format kind of way for you to flash it
There's a guide and everything for fastboot.
---------- Post added at 12:35 AM ---------- Previous post was at 12:33 AM ----------
Personally I will wait for a custom ROM for 4.1 if it doesn't take too long as that's guaranteed and will obviously be faster and safer to install on a ROOTED device.
Someone still confirm if installing Stock ROM while over Custom ROM while ROOTED through CWM is OK or not!?
Hummm, ok...
I'm already using the Stock ROM, I just flashed a new kernel, and I prefer install the stock kernel and unroot my phone. Just to let it clean.
After I install the JB official update, maybe I flash and root again, depends of Google :laugh:
Do you know where can I download a trust official 4.0.4 kernel from the forums? My phone is a Nexus S I9020AUCKJ1, Version Number: IMM76D
Thanks!!!
Ok so i've finally decided im ready to unlock and flash. My question is this: whats the deal with returning to stock and redoing everything on certain roms? Can anyone explain to me the variables here?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
once you have your device rooted and have a recovery installed, make a nandroid back up your stock rom, flash whatever rom you want, then if you need to go back to stock rom, just flash the nandroid back up you made. If you want to go 100%, then you will have to find the stock recovery image, and flash that over your custom recovery as well, then just use OTA Rootkeeper... and temp unroot your phone... and viola, your 100% stock again.... but if you plan to go back to 100% stock then DO NOT UNLOCK YOUR BOOTLOADER!! there is no way to lock it again once you unlock it.
I think it's worth while to note
currently the only custom recovery that is able to flash stock is CWM
TWRP is not able to flash a stock rom
KAD79 said:
I think it's worth while to note
currently the only custom recovery that is able to flash stock is CWM
TWRP is not able to flash a stock rom
Click to expand...
Click to collapse
If you flash a stock ROM using CWM you will lose all data on your device, including any backups you made using CWM. So be sure to backup those files to your PC (they're located in the clockworkmod/backup folder of your internal storage) before flashing the stock Asus ROM.
I've been changing my ROM's throughout the day and have basically memorized the process of flashing CWM, root, and ROM's by now
KAD79 said:
I think it's worth while to note
currently the only custom recovery that is able to flash stock is CWM
TWRP is not able to flash a stock rom
Click to expand...
Click to collapse
TWRP can flash stock. I've done it.
Sent from my SGH-I897 using xda premium
Ive read about problems reflashing ROMs when youre on the CM or AOKP. Need to return to stock, then flash other ROMs, dunno why exactly. So is it enough just to restore my stock nand backup or do I need to do something differently? :good:
This is exactly what im talking about. What are the rules when coming from cyan to a stock flavor?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
So lets say right now im ready to unlock and root. I would want to unlock the device, then root, then flash CWM (not twrp) so i could still retrain (and boot in to without reinstalling) my original rom? Because i still want to titanium my apps.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
not sure if I understand your question right, but yeah you can use your stock rom when you root or flash cwm. Untill you wont wipe anything within CWM, theres no reason you coulndt use it. But dont forget to do backup of your stock mate.
I think part of the confusion is defining what "stock" means, and I've got two different views on it over the past few days:
COMPLETE STOCK means flashing ASUS' original stock firmware, which completely wipes out everything on your tablet (including your nandroid backups) and CWM and takes you back to a fully stock tablet (except it will still have unlocked bootloader). From here, if you want to install ROM's like CleanROM or Hydro you have to re-flash CWM each time, then flash the appropriate ROM.
MODIFIED STOCK would be making a nandroid backup of your stock settings as soon as you flash the stock ROM, install CWM, then back it up and you can revert to it accordingly. I don't know if this would break things when you tried to flash Clean/Hydro and so maybe someone can clarify.
I wanted to try both hydro and cleanrom so I spent many hours yesterday flashing between stock/modified stock. Its kind of a pain, but all part of the learning process.
And one thing I want to note both for myself and for anyone else: if you flash stock without removing CWM it'll give you the broken bootloader logo (android on his back w/ exclamation point), and my solution has just been to do a 'wipe data' from the fastboot menu and the stock will work fine. What I mean by this is I've done this at least three times, where I flash STOCK from within CWM and when I try to boot into recovery, I'll get that android. That's because STOCK completely erases everything including CWM so in order to restore the normal operating procedure, you just need to 'wipe data' from within the tablet.
Hope my understanding of these situations is correct, if not anyone can feel free to correct me
People like to experiment with their tablet, they get easily bored with the same thing.
So they go back to stock and flash another rom like Hydro which is stock based because when you flash CM or AOKP it won't let you just flash to Hydro.
KAD79 said:
I think it's worth while to note
currently the only custom recovery that is able to flash stock is CWM
TWRP is not able to flash a stock rom
Click to expand...
Click to collapse
NOT TRUE!
It should be noted that TWRP is now more functional than CWM. TWRP can now flash stock ROMs just fine. It can now restore complete nandroids, including /boot, and it can now flash from and store to the external SD card. It was just recently updated for this, which is why all the information until now has said to use CWM to flash the stock ROM. So, go ahead and use TWRP. It's perfect now.
Hi,
I have followed everything in this thread http://forum.xda-developers.com/showthread.php?t=1837863
I have backups nandroid ready and wasn't too sure, if I dont like this build then i could restore back to stock using CWM? or Odin.
I felt that I need to wait for reply to comfirm before flashing this cyanogenMOD 10.
Thanks!
LeonKnight12 said:
Hi,
I have followed everything in this thread http://forum.xda-developers.com/showthread.php?t=1837863
I have backups nandroid ready and wasn't too sure, if I dont like this build then i could restore back to stock using CWM? or Odin.
I felt that I need to wait for reply to comfirm before flashing this cyanogenMOD 10.
Thanks!
Click to expand...
Click to collapse
IF my memory serves me right, with an unlocked bootloader, you can recover to a TW rom but I think its needs to either have the kernel built into it OR you need to somehow flash to a TW kernel. I say this because I think that if your kernel is still an AOSP one, then the device will not boot up.
some roms already come with a kernel for their rom so I think in most cases, with CWM 6.0.1.x, you could restore a TW nandroid.
If you want to restore a backup of a TouchWiz rom you have then just use the EZ Recovery app to flash the hybrid (CWM/Kexec) recovery...reboot to recovery and restore your nandroid. Simple process!
Once the Dev's building TW roms start using the non-kexec flashing method then you will be able to restore using the normal CWM recovery. Just like you said, you can also use ODIN to restore to stock but it's a pain because you have to root all over again. Just know you have a few options.
Ok thanks everyone!
So good
Fwiw... I've been switching back and forth between Synergy and CM for a couple days now (flashing multiple times) and cwm touch works for synergy but u need new cwm for CM10.
Hope this helps.
hi,i am using stock rom running 4.0.4,i had it rooted too and now i had two queries
1)Is rom manager compatible with Atrix 2??
im asking this because when i open it, it shows u need to install CWM recovery...but no option in that responds...not even intall cwm (1st option in menu)....so i installed CWM using atrix boot strapper app and now still rom manager is not detecting CWM..please help
2)after installing CWM, i had backup my present stock rom..so if i flash a new rom now will that CWM and back up still exist??(because we will wipe data which will remove everyhting right??)
for suppose if i flash jelly bean rom and if i dont like it...can i restore my previous stock rom without bricking my device??
thanks for u r help
vdpraneeth said:
hi,i am using stock rom running 4.0.4,i had it rooted too and now i had two queries
1)Is rom manager compatible with Atrix 2??
im asking this because when i open it, it shows u need to install CWM recovery...but no option in that responds...not even intall cwm (1st option in menu)....so i installed CWM using atrix boot strapper app and now still rom manager is not detecting CWM..please help
2)after installing CWM, i had backup my present stock rom..so if i flash a new rom now will that CWM and back up still exist??(because we will wipe data which will remove everyhting right??)
for suppose if i flash jelly bean rom and if i dont like it...can i restore my previous stock rom without bricking my device??
thanks for u r help
Click to expand...
Click to collapse
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.
NHS2008 said:
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.
Click to expand...
Click to collapse
Rom Manager does work with Atrix2. If you're on Stock ICS, you can install CWM on every boot, then flash the Bionic recovery through Rom Manager. That will allow you to use the 1 touch backup in RM, just hit backup rom and everything does what it's supposed to.
Here is the CWM on every boot for Stock ICS.
NHS2008 said:
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.
Click to expand...
Click to collapse
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??
vdpraneeth said:
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??
Click to expand...
Click to collapse
No, your Recovery will be wiped after you flash a new rom, but you can install it again and restore your ROM.
But when restoring a rom, make sure you ARE ON THE ROM you are restoring.
E.g. If you flash JB and want Stock ICS back with your backup. First flash the Stock ICS from RSD and then restore your backup from CWM on it.
Or Vice-Versa.
@41rw4lk, Thanks for rectifying that. I did not bother with Rom Manager much.
NHS2008 said:
No, your Recovery will be wiped after you flash a new rom, but you can install it again and restore your ROM.
But when restoring a rom, make sure you ARE ON THE ROM you are restoring.
E.g. If you flash JB and want Stock ICS back with your backup. First flash the Stock ICS from RSD and then restore your backup from CWM on it.
Or Vice-Versa.
@41rw4lk, Thanks for rectifying that. I did not bother with Rom Manager much.
Click to expand...
Click to collapse
but downgrading to stock ICS from JB will brick my mobile right??
is there any problem if im not on the rom im restoring??
(im a newbie and i dont know much..even not found these after searching a lot..thats the reason im asking all these)
41rw4lk said:
Rom Manager does work with Atrix2. If you're on Stock ICS, you can install CWM on every boot, then flash the Bionic recovery through Rom Manager. That will allow you to use the 1 touch backup in RM, just hit backup rom and everything does what it's supposed to.
Here is the CWM on every boot for Stock ICS.
Click to expand...
Click to collapse
how is it possible to flash bionic recovery through RM...all the menu options are disabled for me there even after CWM installed through bootstrap
vdpraneeth said:
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??
Click to expand...
Click to collapse
I don't think any recovery exist after flashing a new rom. We have a locked bootloader, so we can't replace the stock recovery.img, all of our recoveries hijack the boot process to work. CM10 and PA I believe have a built in recovery, and that's about as close as you'll get to having a recovery exist after flashing a rom.
As far as restoring from JB, I believe you can downgrade to ICS, but you'll have to look at the JB thread to be certain. I'm on AT&T so I haven't had an opportunity to try JB (officially). CM10 is based on JB, but for our phone with the locked bootloader, it's more of a pseudo experience and is based on our ICS framework.
As for bricking, there is always a chance to brick, that's part of the mod game, but if you read and pay attention to what you have and what you're doing, you'll be alright.
vdpraneeth said:
but downgrading to stock ICS from JB will brick my mobile right??
is there any problem if im not on the rom im restoring??
(im a newbie and i dont know much..even not found these after searching a lot..thats the reason im asking all these)
Click to expand...
Click to collapse
UNLESS you have AT&T phone you should be just fine with ref lashing the ICS.
YES. there is a big problem if you are not on a ROM you are restoring.
Its like you are trying to comlete your jigsaw puzzle by putting pieces from some another jigsaw puzzle.
vdpraneeth said:
how is it possible to flash bionic recovery through RM...all the menu options are disabled for me there even after CWM installed through bootstrap
Click to expand...
Click to collapse
You need to use the CWM on every boot setup, the Atrix2Bootstrap alone won't do.
41rw4lk said:
You need to use the CWM on every boot setup, the Atrix2Bootstrap alone won't do.
Click to expand...
Click to collapse
yes...my phone is an AT&T version...though im using it with IDEA.....
so if i install CWM on every boot,then rom manager will detect it and work right??
vdpraneeth said:
yes...my phone is an AT&T version...though im using it with IDEA.....
so if i install CWM on every boot,then rom manager will detect it and work right??
Click to expand...
Click to collapse
Yes. I will say though, if you're on an AT&T branded phone with AT&T firmware, do NOT try to flash the new JB FXZ. It doesn't matter who your carrier is, it matters what firmware your phone is using. So, if you're on AT&T then you need to make sure that the things you flash are for AT&T, or else you will brick and that will be then end of that.
41rw4lk said:
Yes. I will say though, if you're on an AT&T branded phone with AT&T firmware, do NOT try to flash the new JB FXZ. It doesn't matter who your carrier is, it matters what firmware your phone is using. So, if you're on AT&T then you need to make sure that the things you flash are for AT&T, or else you will brick and that will be then end of that.
Click to expand...
Click to collapse
thanks a lot...
what are the ROMS avaialble for us???
can i reflash stock ICS from any of those ROMS safely??
thank you
vdpraneeth said:
thanks a lot...
what are the ROMS avaialble for us???
can i reflash stock ICS from any of those ROMS safely??
thank you
Click to expand...
Click to collapse
CM10
PA
Numa
MIUI (had battery issues, but I think they got it all worked out)
there's a few, you'll just have to look. Most of the time, if something is not meant for AT&T, the devs will post in the description that it isn't compatible. If you want stock ICS back at anytime, you can do yourself a favor and make a backup of your stock ICS all setup the way you like it, so you can restore if needed. If all else fails, there is an Official ICS FXZ that will get you back to stock ICS.
41rw4lk said:
CM10
PA
Numa
MIUI (had battery issues, but I think they got it all worked out)
there's a few, you'll just have to look. Most of the time, if something is not meant for AT&T, the devs will post in the description that it isn't compatible. If you want stock ICS back at anytime, you can do yourself a favor and make a backup of your stock ICS all setup the way you like it, so you can restore if needed. If all else fails, there is an Official ICS FXZ that will get you back to stock ICS.
Click to expand...
Click to collapse
my main question is :
will downgrade to ICS cause brick??
how do i create my own backup for stock ICS??
vdpraneeth said:
my main question is :
will downgrade to ICS cause brick??
how do i create my own backup for stock ICS??
Click to expand...
Click to collapse
You're killing me smalls. You're on ICS already, you're not downgrading anything, nor can you downgrade ie. Gingerbread. There is no Official JB for AT&T, so that's not an issue. CM10 is a JB based rom built on an ICS frame, (for our phone at least), and again, you're not downgrading.
To make a back up, boot in to CWM or whatever recovery you're using (not stock), and click backup. You might hit up the noob thread to get an idea of the terminology and basics for our device. Not trying to be rude, but you're running yourself in circles. You got to walk before you can run.
So like the title says I have been out of the ROM game for a little bit. Every couple of months I check in and see whats new and flash something else.
I was on the Jelly Beans ROM (Build 16 I think) and Android 4.1. I did some searching last night as was going to try flashing Gummy ROM…bad idea. I am guessing I needed something prior to jumping up to a 4.4 base. I booted to recovery and wiped everything and tried to flash with no luck. So the phone would not boot and I could only get into recovery and download mode. I did not have my micro SD adapter in order to get jelly beans back on it to flash so I ended up having to use odin to flash a stock rooted 4.1 image. Finally got everything back up and running but I still want to try some of the 4.4 ROMs. So what exactly do I need first in order to flash one? (Modem maybe)…if you know for sure why that happened and what I need to do please let me know. Thanks!
My Current "About Phone" Info...
Android Version - 4.1.2
Baseband version - I535VRBMB1
Jelly Beans - Build 20
P.S. I have tried doing the research and nothing I have found has been clear but one thing I came across is the official 4.3 update was bad news and broke the root methods? So should I stay away from 4.3 ROMs and is the old root method blocked in 4.4 as well or is that a different case since it wasn't actually released for our phone. If that makes sense lol
aholeinthewor1d said:
So like the title says I have been out of the ROM game for a little bit. Every couple of months I check in and see whats new and flash something else.
I was on the Jelly Beans ROM (Build 16 I think) and Android 4.1. I did some searching last night as was going to try flashing Gummy ROM…bad idea. I am guessing I needed something prior to jumping up to a 4.4 base. I booted to recovery and wiped everything and tried to flash with no luck. So the phone would not boot and I could only get into recovery and download mode. I did not have my micro SD adapter in order to get jelly beans back on it to flash so I ended up having to use odin to flash a stock rooted 4.1 image. Finally got everything back up and running but I still want to try some of the 4.4 ROMs. So what exactly do I need first in order to flash one? (Modem maybe)…if you know for sure why that happened and what I need to do please let me know. Thanks!
My Current "About Phone" Info...
Android Version - 4.1.2
Baseband version - I535VRBMB1
Jelly Beans - Build 20
P.S. I have tried doing the research and nothing I have found has been clear but one thing I came across is the official 4.3 update was bad news and broke the root methods? So should I stay away from 4.3 ROMs and is the old root method blocked in 4.4 as well or is that a different case since it wasn't actually released for our phone. If that makes sense lol
Click to expand...
Click to collapse
you need the latest recoveries to flash kk roms. cwm is here https://www.clockworkmod.com/rommanager
and twrp is here http://teamw.in/project/twrp2/102. make sure you download the d2vzw version
if you're rooted you should have no problems flashing 4.4 rom. I recommend beanstalk from here http://forum.xda-developers.com/showthread.php?t=2354113. has worked great for me. you have to also update the modem to ML1 from here http://forum.xda-developers.com/showthread.php?t=1788313
as always do a nandroid before you do anything and you should backup your sd card to your computer. they probably will move post this to another thread.
good luck
dandydon414 said:
you need the latest recoveries to flash kk roms. cwm is here https://www.clockworkmod.com/rommanager
and twrp is here http://teamw.in/project/twrp2/102. make sure you download the d2vzw version
if you're rooted you should have no problems flashing 4.4 rom. I recommend beanstalk from here http://forum.xda-developers.com/showthread.php?t=2354113. has worked great for me. you have to also update the modem to ML1 from here http://forum.xda-developers.com/showthread.php?t=1788313
as always do a nandroid before you do anything and you should backup your sd card to your computer. they probably will move post this to another thread.
good luck
Click to expand...
Click to collapse
ahh I didn't even think of that? I do know for a fact whatever version of CWM i had was not recent..Are you sure that is the only issue? so with a newer recovery...like I have now that I fixed my phone..I can flash a 4.4 ROM no problem? I could have sworn I remember hearing something about needing a certain modem...or something similar
aholeinthewor1d said:
ahh I didn't even think of that? I do know for a fact whatever version of CWM i had was not recent..Are you sure that is the only issue? so with a newer recovery...like I have now that I fixed my phone..I can flash a 4.4 ROM no problem? I could have sworn I remember hearing something about needing a certain modem...or something similar
Click to expand...
Click to collapse
yes. flash the ML1 modem. I provided the link in my previous post. it's a fact that earlier recoveries won't flash kk roms. I found out the hard way myself. hopefully you'll have titanium or rom toolbox to backup your apps with data.
dandydon414 said:
yes. flash the ML1 modem. I provided the link in my previous post. it's a fact that earlier recoveries won't flash kk roms. I found out the hard way myself. hopefully you'll have titanium or rom toolbox to backup your apps with data.
Click to expand...
Click to collapse
Thanks a lot!!.. So how do I know if my recovery is new enough? I was never a fan of the touch recoveries because I felt like it would be easier to do something on accident so I haven't tried one in a while...I am using clockwork mod recovery 6.0.4.5. Is that new enough??
Also one lasttttt question I swear...can someone give me a quick list of the different recovery options that are out there now...and maybe list some features of each...thank you
aholeinthewor1d said:
Thanks a lot!!.. So how do I know if my recovery is new enough? I was never a fan of the touch recoveries because I felt like it would be easier to do something on accident so I haven't tried one in a while...I am using clockwork mod recovery 6.0.4.5. Is that new enough??
Also one lasttttt question I swear...can someone give me a quick list of the different recovery options that are out there now...and maybe list some features of each...thank you
Click to expand...
Click to collapse
that recovery is fine. i've only used cwm and twrp.. had some problems with philz recovery so I ditched it. basically they're all the same. twrp lets you name your back where as cwm just uses some default name which of course you can change with a file manager. twrp also wipes all 3 (system, cache and dalvik) with one swipe where as cwm requires 3 separate operations. I really haven't done much in recovery other than wiping and flashing. I'm actually on the latest twrp and have had no problems flashing kk roms. keep in mind that you can't backup in cwm and restore it using twrp and vice versa. it's really more a personal preference as far as I'm concerned.