Is is even possible to plug in a wireless broadband card/USB into a WiFi only Note 10.1?
No I does not detect I tried it once but did not work I think the drivers of the usb are not pre installed you can try it no harm in doing that to check whether it is detected
I saw an app that allows you to use it. I'll look for it.
Maybe this
https://play.google.com/store/apps/details?id=de.draisberghof.pppwidget
apristel said:
I saw an app that allows you to use it. I'll look for it.
Maybe this
https://play.google.com/store/apps/details?id=de.draisberghof.pppwidget
Click to expand...
Click to collapse
Yes should work but you need to be rooted as it needs to install kernel files as per play page I guess those are the usb drivers
Thanks for the tips and information.
Skyroam Gmate+
iRock48 said:
Is is even possible to plug in a wireless broadband card/USB into a WiFi only Note 10.1?
Click to expand...
Click to collapse
try Skyroam Gmate+, maybe this will help you. I can't post a link, but you can try skyroam . com. Geeks . com has it for 55 dollars.
Related
Hello all. I have an early Christmas present for all the Stock firmware users.
I have created a usb tethering application that should work for all Android devices regardless of root access. The code is and will always be GPL. I used the azilink android app written by aziwoqpd--> http://forum.xda-develoers.com/showthread.php?t=481162
I have to give him lots of credit, because without his app this would not work.
This has been tested on the G1 and the Motorolla Droid. It should work on the Hero, MyTouch(Confirmed working), etc... The GUI should install and work on all versions (x86, x86_64) of Windows starting with XP.
The GUI that I have written controls the adb port forwarding and openvpn connection while showing status. Please test this application and let me know how it goes.
Download:
http://www.4shared.com/file/168168016/47ce692d/azilink-gui-setup-110.html
Source:
http://www.4shared.com/file/168521281/18f538f5/azilink-gui_src.html
has anyone tried this
So your telling me this is "wifi tether" for non rooted users?
G1-evolve said:
So your telling me this is "wifi tether" for non rooted users?
Click to expand...
Click to collapse
Nope. This is USB Tether for non rooted users
Link is down for azilink, use this link instead for more information:
http://code.google.com/p/azilink/
Confirmed working on Windows 7, and doesn't require root.
Edit: The zip in original post contains the GUI, the apk, and open vpn. Start the apk, then click "connect" on the azilink-gui. Make sure "USB debugging" is enabled in Settings on your phone.
Thanks a lot.
kevev said:
Nope. This is USB Tether for non rooted users
Click to expand...
Click to collapse
What's the difference?
G1-evolve said:
What's the difference?
Click to expand...
Click to collapse
Wifi tether and USB tether are two totally different methods of tethering.
Wifi tether doesn't utilize the usb cable to tether.
G1-evolve said:
What's the difference?
Click to expand...
Click to collapse
USB Tether requires the device to be connected to the Computer via USB.
Wifi tether allows users to wirelessly connect to your device via their Computer.
Wisefire said:
USB Tether requires the device to be connected to the Computer via USB.
Wifi tether allows users to wirelessly connect to your device via their Computer.
Click to expand...
Click to collapse
I see, so say I want to put this on my girlfriends Mytouch, does she NEED ADB installed on her PC?
G1-evolve said:
I see, so say I want to put this on my girlfriends Mytouch, does she NEED ADB installed on her PC?
Click to expand...
Click to collapse
ADB is included in the azilink-gui installer. The only thing you will need to do manually is install the driver which is included in the install directory.
G1-evolve said:
I see, so say I want to put this on my girlfriends Mytouch, does she NEED ADB installed on her PC?
Click to expand...
Click to collapse
Download ADB from here:
http://azilink.googlecode.com/files/adb.zip
I'm not sure if ADB is built into the azilink-gui, so it's safe to just install it on your girlfriend's PC.
confined
wohoo. worx fine..thankyou awsome job
fit333 said:
wohoo. worx fine..thankyou awsome job
Click to expand...
Click to collapse
Glad to see it works on the MyTouch.
The source has been posted to the first page.
hey friends.. i have another problem ..
yesterday my internet connection was not working so i tried to connect my sgr's internet to my pc but every time i tried to do so it produced error 633 saying that the modem is currently in use.....i used usb tethring ...
anyone know how to solve this problem...?
Hav u installed samsung usb driver or kies in ur pc ?
akshatsourav said:
Hav u installed samsung usb driver or kies in ur pc ?
Click to expand...
Click to collapse
yes i have installed usb drivers.
ksrsngh said:
yes i have installed usb drivers.
Click to expand...
Click to collapse
Then u shuld try to reset your settings.....or close all apps while tethering via task killer....
finally got it working....
Hey guys .. i worked it out today..
installed pdanet on my device and on my pc then just switched on the usb tethring option &clicked on the pdanet tray icon on my pc and connected to internet without any problem....
still thanks fr helping out... cheersssss.......
Congrats dear.....njoy !!
It works out of the box in Ubuntu linux
ksrsngh said:
Hey guys .. i worked it out today..
installed pdanet on my device and on my pc then just switched on the usb tethring option &clicked on the pdanet tray icon on my pc and connected to internet without any problem....
still thanks fr helping out... cheersssss.......
Click to expand...
Click to collapse
Good to hear that pdanet solved your problems. For general information, in Ubuntu USB tethering works without any third party app. Just make sure that USB debugging is switched off
(Settings->Applications->Development->USB debugging), connect with USB cable and open Network Manager in the computer.
n0frills said:
Good to hear that pdanet solved your problems. For general information, in Ubuntu USB tethering works without any third party app. Just make sure that USB debugging is switched off
(Settings->Applications->Development->USB debugging), connect with USB cable and open Network Manager in the computer.
Click to expand...
Click to collapse
i might be doing something wrong in doing the steps..
cn u please tell me step by step instruction fr that....
thnx in advance
I am working on building my first Android app, this app will allow me to use my phone with a USB device that will let my phone work as a remote for my TV.
I have already build my GUI layout and database, and they seem to be running good on my Note 2.
I am now stuck on trying to figure out how to connect this device to my phone.
The device I have is the USB IR Toy 2, here is the link
dangerousprototypes.com/docs/USB_Infrared_Toy
Any help is welcome, I am using the Android SDK to build this app.
Once I am done I will post my code here for you all to use as you wish.
no responses?
Is this not possible?
ZIGMA51 said:
I am working on building my first Android app, this app will allow me to use my phone with a USB device that will let my phone work as a remote for my TV.
I have already build my GUI layout and database, and they seem to be running good on my Note 2.
I am now stuck on trying to figure out how to connect this device to my phone.
The device I have is the USB IR Toy 2, here is the link
dangerousprototypes.com/docs/USB_Infrared_Toy
Any help is welcome, I am using the Android SDK to build this app.
Once I am done I will post my code here for you all to use as you wish.
Click to expand...
Click to collapse
Usb otg I assume to be to the solution.
Sent from my LG-LS970
desert54 said:
Usb otg I assume to be to the solution.
Sent from my LG-LS970
Click to expand...
Click to collapse
Usb otg?
ZIGMA51 said:
Usb otg?
Click to expand...
Click to collapse
Its a function that allows you to connect a usb device to a phone.
Sent from my LG-LS970
ok, I will need to look in to USB on the go more.
Is there any example code I can review, that might help?
ZIGMA51 said:
ok, I will need to look in to USB on the go more.
Is there any example code I can review, that might help?
Click to expand...
Click to collapse
What I know is that usb otg can only be done on certain chipsets, as for code source, I have no idea.
Sent from my LG-LS970
---------- Post added at 08:09 AM ---------- Previous post was at 07:59 AM ----------
Assuming that the note 2 supports USB Otg stock, You could just simply purchase a usb otg cable for it and work from there.
OK I got my device to connect to my phone, I even made it where when I connect my device it launches my app, but I am having issues with getting my phone to talk to my serial USB device.
Anyone have a idea how to do this?
So i got a bunch of on the go cables. And wanted to see what the stylus could do.
So far ive hooked a 160 gb otg hard drive. Works decently.
2. Ps3 control for gaming.
3 flash drives. Of coarse this works.
4. Usb ob2 interface for scanning automobile ecus. Works better than g4 if i might add.
5. A old logitech wingman joystick. Works on some flight simulators.
I also ordered a while back a fastboot cable for my kindle. When i plug in on ms631 from power off no commands needed boots straight to fastboot mode
Im gonna make a pair of vr goggles prob this weekend and see if this screens good enough for vr. Did it on my g3 and g4. And it was killer
How did you get you're OTG to function? I plug in a 8gb flash drive to mines and it doesn't work for me I'm using the T-Mobile version MM.
Nothing its reading natively. Try stick mount.
Ive been reading about loads of people haveing problems with it im looking for a fix.
But the phone most def supports otg verriefied from more than one site
vansthatcrash said:
How did you get you're OTG to function? I plug in a 8gb flash drive to mines and it doesn't work for me I'm using the T-Mobile version MM.
Click to expand...
Click to collapse
Maybe the metro one dont have otg
Has anyone figured out how to get OTG to work on the T-mobile LG G Stylo with Marshmallow? Mine has the latest stock 20c software (H63120c). I use OTG with my FLIR One Android, my SDRPlay, and my RTL-SDR stick, and it would be sad if I have to still use my old Xperia Z for all that.
ecarlson said:
Has anyone figured out how to get OTG to work on the T-mobile LG G Stylo with Marshmallow? Mine has the latest stock 20c software (H63120c). I use OTG with my FLIR One Android, my SDRPlay, and my RTL-SDR stick, and it would be sad if I have to still use my old Xperia Z for all that.
Click to expand...
Click to collapse
This page seems to say that adding the file android.hardware.usb.host.xml to /system/etc/permissions will enable USB host mode. Has anyone tried adding this file to a T-Mobile or Metro PCS Marshmallow phone? I haven't rooted my T-mobile Marshmallow phone yet, but I will if I root access will allow me to enable OTG.
http://rfexplorer.com/usb-host-mode/
Update: Has anyone with T-mobile or MetroPCS Marshmallow and root tried this app, or manually making the changes that this app applies, to see if it will get OTG to work: https://play.google.com/store/apps/details?id=org.tauruslabs.usbhostcheck
ecarlson said:
This page seems to say that adding the file android.hardware.usb.host.xml to /system/etc/permissions will enable USB host mode. Has anyone tried adding this file to a T-Mobile or Metro PCS Marshmallow phone? I haven't rooted my T-mobile Marshmallow phone yet, but I will if I root access will allow me to enable OTG.
http://rfexplorer.com/usb-host-mode/
Update: Has anyone with T-mobile or MetroPCS Marshmallow and root tried this app, or manually making the changes that this app applies, to see if it will get OTG to work: https://play.google.com/store/apps/details?id=org.tauruslabs.usbhostcheck
Click to expand...
Click to collapse
So far its a no go. Placed the xml file...nothing. then edited build.prop to remove a # from a line...nothing....inserted <feature name=”android.hardware.usb.host” /> into permissions xml.....nothing. still working on it. Some say it works natively, others say they cant get it to work at all
Sent from my LG-H631
CollisionFactor said:
So far its a no go. Placed the xml file...nothing. then edited build.prop to remove a # from a line...nothing....inserted <feature name=”android.hardware.usb.host” /> into permissions xml.....nothing. still working on it. Some say it works natively, others say they cant get it to work at all
Click to expand...
Click to collapse
Thanks. If you do get it working, I would be very interested to hear about it.
ecarlson said:
Thanks. If you do get it working, I would be very interested to hear about it.
Click to expand...
Click to collapse
So i was able to get OTG support enabled on the device but the phone doesnt send enough power to the micro usb so you would need an otg y cable to add external power supply like a portable battery
Sent from my LG-H631
CollisionFactor said:
So i was able to get OTG support enabled on the device but the phone doesnt send enough power to the micro usb so you would need an otg y cable to add external power supply like a portable battery
Sent from my LG-H631
Click to expand...
Click to collapse
Cool. I have a Y cable. How did you get it working?
ecarlson said:
Cool. I have a Y cable. How did you get it working?
Click to expand...
Click to collapse
Well i was able to enable the host api by following the url you shared...after you edit those files connect your otg y cable, flash drive and external power to your phone and see what it does...im still trying to get mine to actually mount the drive...let me know if you can figure anything out
Sent from my LG-H631
CollisionFactor said:
Well i was able to enable the host api by following the url you shared...after you edit those files connect your otg y cable, flash drive and external power to your phone and see what it does...im still trying to get mine to actually mount the drive...let me know if you can figure anything out
Click to expand...
Click to collapse
I haven't rooted mine yet, but I might now that it might be possible to enable OTG.
I gave up, and got a used "mint" LG V20 for cheap, which has OTG support built in. My LG G Stylo will be used by someone who has no idea what OTG is.
Besides "usb.host" to your permissions xml's, setprop "sys.usb.configfs=1" & "sys.usb.config=*" in dev options must be set right. Init.qcom.usb.rc told me what I needed to get mtp & adb working together.
Sent from my LG-H631 using Tapatalk
My OnePlus 7 Pro acts as Read-Only when I plug it in.
I noticed there is a folder in the OnePlus 7 Pro that has a Driver executable which installs the necessary drivers and I run that fine.
But that doesnt do anything and I cannot access my phone storage at all, that OnePlus folder with the drivers is all that shows up every time.
Yes I change it to "File Transfer", yes Ive tried all USB ports and even different UCB cables and cords. Going into device manager it seems windows is being a clown and cant seem to understand the drivers. Ive attached some pictures to show what I get.
Im honestly lost at this point as to what to do. Please help.
What does my computer show? Isn't it right there called storage D? If not right click run as admin and reinstall drivers and restart, plug phone in and choose file transfer..it may or may not pop up right away that's why need look at my computer
djhulk2 said:
What does my computer show? Isn't it right there called storage D? If not right click run as admin and reinstall drivers and restart, plug phone in and choose file transfer..it may or may not pop up right away that's why need look at my computer
Click to expand...
Click to collapse
Thats my 4TB PC storage drive, not the phone. Ive installed the drivers as admin, done everything I can think of and still what you see in the screens is what Ive been getting.
Have you tired running both setups?
djhulk2 said:
Have you tired running both setups?
Click to expand...
Click to collapse
Yes. They both just install the drivers so not sure why there are two setups.
How about the tool all in one, install drivers option
djhulk2 said:
How about the tool all in one, install drivers option
Click to expand...
Click to collapse
Just tried that and same thing T_T.
I'd remove the USB drivers, then install drivers from toolallinone, then scan for changes
djhulk2 said:
I'd remove the USB drivers, then install drivers from toolallinone, then scan for changes
Click to expand...
Click to collapse
Did that and does nothing. Same old T_T
Anyone can help?
10cheesecakes said:
Anyone can help?
Click to expand...
Click to collapse
Try this
https://www.youtube.com/watch?v=U7lruX5XfSs
Rebel021 said:
Try this
https://www.youtube.com/watch?v=U7lruX5XfSs
Click to expand...
Click to collapse
Yea I tried that and I get that "This device is not working properly because Windows cannot load the drivers required for this device. (code 31). I mentioned that in my initial post and have a picture of it.
Are you using a USB cable that supports data transfer? The original cable from OnePlus that came with your device as an example.
jcsww said:
Are you using a USB cable that supports data transfer? The original cable from OnePlus that came with your device as an example.
Click to expand...
Click to collapse
Yes I have the original and I bought a new one because I heard the original for some odd reason has issues with data transfer. It hasn't helped.
Bump? Anyone please help?
10cheesecakes said:
Bump? Anyone please help?
Click to expand...
Click to collapse
Just a shot in the dark...
Have you tried the PTP option?
I've had several phones that, for whatever reason, the files couldn't be seen unless I used PTP instead of the File Transfer option.
KOLIOSIS said:
Just a shot in the dark...
Have you tried the PTP option?
I've had several phones that, for whatever reason, the files couldn't be seen unless I used PTP instead of the File Transfer option.
Click to expand...
Click to collapse
Yes Ive tried that too to no avail sadly.
Any other ideas guys? It seems to be a Windows driver issue or something along those lines.
Any other help guys?