Long-time lurker, this is my first serious post here, so... be gentle
The Hardware: Verizon Galaxy S3 16GB SCH-i535 (Pebble Blue, if you must know )
Where I was: Rooted Stock ICS 4.0.4 (Root66) VRALF2 with OTA blocker to keep it there.
What I did first:
Unblocked OTA updates.
First update 40MB VRALF2 to VRALG7. Updated succeeded but broke root. Restored Root using Voodoo OTA Rootkeeper
Second Update: 62MB VRALG7 to VRALHE. Updated succeeded but broke root again. Got a Custom Padlock screen on bootup that wouldn't go away even if the phone was not rooted before the upgrade. Restored Root using Voodoo OTA Rootkeeper.
Third Update: 400MB VRALHE to VRBLK3. Update FAILED. Repeatedly. Each time, the update would download and reboot into recovery mode to install. It would get about 40% of the way through and the widdle gween andwoid would fall over with a yellow twiangle above him. Then it would reboot back into VRALHE.
Hmmm...
What I did next:
ODIN flashed back to VRALF2 Root66
Took OTA updates.
First succeeded as before, so did the second. To my surprise the third ran to completion. Restored Root using Voodoo OTA Rootkeeper. Still has a custom padlock on boot, but when I unlocked the bootloader it disappeared - either that or the boot screen didn't stay on long enough for it to appear - not sure which.
Anyway, I am now on JB. The last to the party. as usual. Project butter must have worked - the interface feels smoother.
Battery life is a mixed bag. I use Battery Widget Reborn Pro to measure the average time to use 1% of battery life. Under ICS it was 6-9 minutes. On initially installing Jelly Bean, this initially dropped to about 3 minutes. I assumed that this was because of post-upgrade housekeeping, as the CPU was continuously busy (according to Usage Timelines Pro). After leaving it running and on the charger all night long, it settled down. It is now at 10-15 minutes per 1% of battery life - almost double what I was getting before.
OTA blocker supports VRALF2 and VRALG7, but it does NOT support VRALHE or VRBLK3. This is not surprising; the last version is three months old. With no OTA Blocker, I am at the mercy of whatever method Verizon comes up with to bugger up my phone. The OTA blocker folks need to get their fingers out and update the app.
On the other hand, the folks who built Voodoo OTA Rootkeeper (which I originally bought for my Droid X2) are on the ball and they have saved my bacon thus far.
Hope this helps anyone out there in a similar predicament. The usual caveat applies: Before trying anything drastic, BACK UP YOUR DATA!
Finally I would like to recognize two apps that have been very useful to me during this process: I have no interest in either developer or program, just a satisfied customer.
Usage Timelines -- A neat program that tells you how busy your CPU is (Free, full version is $2.49)
EZ Recovery -- on-the-fly recovery flash of CWM, CWM Touch, TWRP, Stock or... just about anything else. (Free, but I sent the dev a few dollars)
If you want to block OTA, and own Titanium Backup you can freeze the process that triggers them. The OTA Blocker that your talking about is not needed.
Hmmmm...
Elite49 said:
If you want to block OTA, and own Titanium Backup you can freeze the process that triggers them. The OTA Blocker that your talking about is not needed.
Click to expand...
Click to collapse
Funny... I had tried blocking processes before using the OTA blocker, and it hadn't worked. Did I miss something? Which processes do I need to freeze?
SDM 1.0
lol smh
I'll be gentle.
Curious. Why would you go through all of that? You know you could have just unlocked the BL, flashed Vzw JB stock zip and then the radios? And be at the same spot? 8 days sooner? Lol
I never understood the allure of wanting to take an OTA. I like the fastest way possible. We all end up with the same product . Never got it
Oh, and sorry about your X2. I had one of those. Horrid device....
Sent from my SCH-I535 using Tapatalk 2
1ManWolfePack said:
I'll be gentle.
Curious. Why would you go through all of that? You know you could have just unlocked the BL, flashed Vzw JB stock zip and then the radios? And be at the same spot? 8 days sooner? Lol
I never understood the allure of wanting to take an OTA. I like the fastest way possible. We all end up with the same product . Never got it
Oh, and sorry about your X2. I had one of those. Horrid device....
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the reply. I decided to go OTA because... it was there. I wanted to know what the fuss was about. Since I had alreay Odin-flashed a ROM I knew I could, but I had never taken an OTA, and wanted to see how far down that rabbit-hole went.
Had that not taken me where I wanted to go, flashing a JB ROM would have been my next move. The eight-day delay was not an issue - when it comes to updates, I tend to wait until others have taken the arrows in the back.
More than a week later, the phone is rock-solid. Under ICS, I used to have to reboot the phone once or twice a day. This phone has been running for over a week without being rebooted (see screenshot), and is still going like a champ. There are just two problems: The GPS pop-up and the Bluetooth Pop-up... but that is another subject for another thread.
As for the X2, it was a lovely little phone, and I was happy with it. The biggest problem with the phone was the lack of support from Verizon (just like the S3 ) I had to upgrade to keep my unlimited and get to 4G, and that is why I took the S3.
Related
I am rooted using the Universal Xoom Root method. I am still running stock, only with SU and apps which require SU. Why can I not accept an OTA update? It seems like the worse that could happen is it overwrite the SU.apk and I need to re-root.
Thanks in advance.
I was wondering about this as well. I am rooted and am running Rogue kernel. I guess I'll just update and see what happens. Worse comes to worse, I will have to re-root.
Seems like the Xoom forums are quiet...did a lot of people abandon the device for the Galaxy Tab 10.1...When previous OTAs happened, the forums were chock full of chatter about to or not to accept the update.
Yeah, I just tried an OTA update and it wouldn't work. Got the Droid with exclamation point. Up + power put me back where I was.
Sent from my Xoom using XDA App
same here. No dice on the update, just stuck at the install screen. On a positive note, the update notifications are gone. Damn those were annoying.
If you root, even without any additional custom ROM/kernel mods, you may receive notification of an OTA update but you should not accept it and try to install it. It will probably put you into a bootloop or worse.
If you wish to root, don't worry. Our wonderful developers are hard at work right now, configuring an update for the device...we'll more then likely get it before the official release comes out OTA.
Anyway, you can always revert back to stock if you really want the OTA update, but stock is boring.
place your unrooted backup on, take update and reroot.
if you don't have one, their are some around.
I keep a backup that isn't rooted with all my apps installed, then when update comes, it is real quick to restore, update and reroot ....
jerrycycle said:
If you root, even without any additional custom ROM/kernel mods, you may receive notification of an OTA update but you should not accept it and try to install it. It will probably put you into a bootloop or worse.
If you wish to root, don't worry. Our wonderful developers are hard at work right now, configuring an update for the device...we'll more then likely get it before the official release comes out OTA.
Anyway, you can always revert back to stock if you really want the OTA update, but stock is boring.
Click to expand...
Click to collapse
Yeah, diddo here with it not bothering me about OTA updates anymore after trying. It didn't put me in a boot loop, just the pretty droid screaming (exclamation point)
I have a backup from before I rooted, but what the heck, it didn't hurt anything, and I was just playing around.
Thanks for everyone's input.
Spoke too soon. The update is back to nagging me again. Errrrrrrr
Why can't they just push out ICS for the Xoom. Hell, they showed ICS on the Verizon Xoom at LeWeb this week.
flippingout said:
Spoke too soon. The update is back to nagging me again. Errrrrrrr
Why can't they just push out ICS for the Xoom. Hell, they showed ICS on the Verizon Xoom at LeWeb this week.
Click to expand...
Click to collapse
Yeah, diddo. Mine started again about three days after I tried to install. I too am looking forward to ICS.
Sent from my Xoom using XDA App
I'm curious if anyone else waits a bit before rooting. Just in case the phone breaks early on and needs to be sent back.
I'm thinking maybe wait 1-2 months?
Am I paranoid, or does everyone else do this too?
.jond said:
I'm curious if anyone else waits a bit before rooting. Just in case the phone breaks early on and needs to be sent back.
I'm thinking maybe wait 1-2 months?
Am I paranoid, or does everyone else do this too?
Click to expand...
Click to collapse
Personally I don't worry about that. I DO wait to give myself time to familiarize myself with how the phone functions and such before rooting so that I know when there is a problem, rather than second guessing.
It is also hard to tell if a Rom/kernel is running better when you have no base line to compare it to.
I rooted my phone almost immediately. I don't like using custom ROMs but I do like using apps and tweaks that require root.
Sent from my Nexus 5 using xda app-developers app
1-2 months??? I didn't even make it 1-2 hours. My phone was unlocked and rooted within 30 minutes of delivery.
I unlocked, installed TWRP, and rooted within 20 minutes of UPS delivering it.
I used to root and start flashing almost immediately. But as the years have passed and I've become more reliant on my phone for work and such, I've started pulling back a bit. I've reached a point where I just get too frustrated with even the slightest bugs so now I immediately unlock the bootloader (to prevent having to do a full factory restore later) and just use the phone as is until a fully stable ROM comes around that I feel comfortable flashing without losing any functionality at all.
This time around I'll probably stay stock with Nova Launcher (once the new 4.4 version is finalized) for another couple months. Time will tell though, I suppose.
.jond said:
I'm curious if anyone else waits a bit before rooting. Just in case the phone breaks early on and needs to be sent back.
I'm thinking maybe wait 1-2 months?
Am I paranoid, or does everyone else do this too?
Click to expand...
Click to collapse
Seeing as I have a Nexus device, with factory images provided directly from Google that will return my phone completely back to stock (except lock the bootloader), I usually don't hesitate to root or flash custom ROMs. The only reasons I haven't unlocked my bootloader yet is because CWM isn't completely stable yet (I don't like TWRP for some reason), and because my brother is debating on a Nexus 5 for his new phone, and I wanted to show him complete stock because he won't be a tinkerer. He'll be using the unmodded, unrooted bare stock image.
I rooted it out of the box yesterday.
Waiting myself. Want to get a feel for this device as is. Maybe later I will root/flash. But for now I am happy as is. No rush.
The important thing is you learn about the phone and how to root it and potential issues before you do it. I'm still waiting for my phone but the first thing I'm going to do is put a custom recovery on and make a nandroid. Then I'll root it as I have apps I like to use that require root. I'm not worried about warranty issues as it's pretty straight forward to put the factory image back on it and relock it.
Also, remember that when you unlock it you'll lose all your data and apps. And you'll need to unlock it to root it.
I booted, took the ota, unlocked the bootloader, installed TWRP and Super SU as soon as the phone was in my grimy hands.
Rooted immediately after taking out of the box .. no point waiting...
I unlocked and rooted before activating. Not really planning on flashing any ROMs, but just wanted it done in case I needed to tweak cpu to increase battery life.
Just until you familiarize with your new device.
Just successfully rooting won't affect the end results when using the stock Rom. Everything should still work the same way but with more options for the user.
I jut waited until next day, but took time to play some games, make calls/texts, web browsing and tested all features. There I learned the battery life, Net speed and stock performance. Everything was the way should be Firmware/Hardware wise:good:. Then, unlocked/rooted/ & flashed its first Rom
and here we are!
I didn't even boot it. I powered it on in download mode, fastboot oem unlocked, flashed twrp and rooted. Then booted for the first time. I only rooted for tibu and adaway. Now just waiting on aokp.
I waited 4 days only and mainly because we have no stable recoveries yet. Twrp is a joke while cwm is not official yet.
caribouxda said:
I waited 4 days only and mainly because we have no stable recoveries yet. Twrp is a joke while cwm is not official yet.
Click to expand...
Click to collapse
I'd say just the opposite, but then I like twrp
You can unroot, so....
Got a notification this morning that there was a new update available for KitKat. I do not know what the update is as I postponed it. I am currently running KitKat 4.4.2 Kernel version 3.4.0. The build is D80020c. I am rooted. I have no other information except that it shows that an update is pending but it will not tell me what the update is and I do not know where to find out what it is.
Anyone have any ideas as to what this is? I am concerned because the last time an update rolled out, it soft bricked my rooted phone.
I spoke with tech support at AT&T and they claim that they do not know what it is and suggested that I call LG for an answer.....
NevetsDrassel said:
Got a notification this morning that there was a new update available for KitKat. I do not know what the update is as I postponed it. I am currently running KitKat 4.4.2 Kernel version 3.4.0. The build is D80020c. I am rooted. I have no other information except that it shows that an update is pending but it will not tell me what the update is and I do not know where to find out what it is.
Anyone have any ideas as to what this is? I am concerned because the last time an update rolled out, it soft bricked my rooted phone.
I spoke with tech support at AT&T and they claim that they do not know what it is and suggested that I call LG for an answer.....
Click to expand...
Click to collapse
Don't install it, it jacked up my phone. I was running the rooted mixed partition D80020c and I can't boot or get into download mode now. All I get it a constant reboot back to recovery. Cannot install another ROM, cannot restore a backup. My daughter was playing with my phone and pushed to continue with the install and now I'm trying to unscrew it.
Jank4AU said:
Don't install it, it jacked up my phone. I was running the rooted mixed partition D80020c and I can't boot or get into download mode now. All I get it a constant reboot back to recovery. Cannot install another ROM, cannot restore a backup. My daughter was playing with my phone and pushed to continue with the install and now I'm trying to unscrew it.
Click to expand...
Click to collapse
Is there any way to force a not install or deny it? The only option I have is to postpone the install and after 4 hours, it will run again and continue to run every 4 hours unless I find a way to break the cycle. How do I force a no install option?
That is what happened to me last time with the "q" update. I postponed the install (no option to not take it) and it installed itself after 4 hours when I left my phone on one night. I woke up to a bricked phone.....
NevetsDrassel said:
Is there any way to force a not install or deny it? The only option I have is to postpone the install and after 4 hours, it will run again and continue to run every 4 hours unless I find a way to break the cycle. How do I force a no install option?
That is what happened to me last time with the "q" update. I postponed the install (no option to not take it) and it installed itself after 4 hours when I left my phone on one night. I woke up to a bricked phone.....
Click to expand...
Click to collapse
I don't know how to permanently disable the update, but I'm sure there's a way. As info, I was able to easily fix my phone with the help of this thread posted by @thecubed: http://forum.xda-developers.com/showthread.php?t=2451696. I didn't read it all, but this might be what disables the update.
I'm not rooted. I took the latest update and all is fine. It's google+ fixes and Google wallet support. It actually let me set up tap & pay! I'll have to go somewhere to try it out.
Sent from my LG-D800 using Tapatalk
I got the notification too but figured that it would probably screw things up since I'm rooted and running TWRP so I did a little searching and came across this, http://forum.xda-developers.com/showpost.php?p=50454408&postcount=3 . It's been a few hours since I changed the setting and haven't seen the update notification again although AT&T pushed the update into CACHE/FOTA sometime this morning.
Well scratch that, the notification just came back. I'll try freezing it now.
Well if rooted just use TB to freeze software update. I am also running a mixed partition D80020c. I am on Straight Talk AT&T. Before rooting I tried taking the official OTA of KitKat but for some reason you can't enter an APN type so I couldn't get or send MMS. So I flashed back to the D firmware,rooted,added custom recovery,entered the APN type and then flashed the modified C firmware. You could also use Root Freezer instead of Titanium Backup to freeze
I' m hoping some experts can chime in.
I rooted PK1 about 10 days ago. Followed the Verizon S7 forum that had clear instructions, and used the v15 fixes + debloater.
I made sure the governors were set to interactive.
Despite all this, my phone was extra buggy and had lag, compared to stock. It seemed to get worse with time.
Then on day 6, after root, my phone started boot-looping on the tmobile logo and vibrated.
I un-rooted back to PIA, and tmobile still seems to be monitoring hotspot use, I thought was part of the PK1 OTA.
So, my questions are:
1) are those rooted on PK1 stable, like stock? OR is there still stability issues, beyond adjusting the governors to interactive?
2) what are people using to successfully circumvent tmobiles new hotspot throttle. ( .5kbs or pay $25 per month).
xtether module in xposed, or WiFi Tether Router (root). ??
what is working?
thanks in advance !
I'm not on the PK1 firmware yet, but I just upgraded from PG1 to PIA.
As far as performance goes, I found this thread VERY helpful: http://forum.xda-developers.com/ver...uide-fine-tuning-performance-battery-t3417804
Maybe it will serve well for you as well. As far as rooting is concerned, not too sure from personal experience, but I heard the ENG boot works with the newest firmware and I'm guessing the modified SU should work for it too.
If you would like to try reverse engineering the files yourself, maybe these guides will help out:
http://arm.ninja/2016/03/04/reverse-engineering-samsung-s6-modem/
http://forum.xda-developers.com/android/software-hacking/how-to-reverse-engineer-kernel-t3137384
http://www.fortisfio.com/extract-android-rom-for-reverse-engineering/
In regards to removing bloatware, I prefer removing apps over services because you never know when you might need a service that you accidentally removed from a previous time. Also I've been going through many cases of trial & error with removing bloatware and a few times ended up messing up other apps in the process that would force crash, but with my current setup everything seems to be working well.
If you need help with removing bloatware, there are 3 apps that really helped me out.
https://play.google.com/store/apps/details?id=com.piriform.ccleaner <-- Surprisingly ccleaner is awesome for the android as well as the PC.
https://play.google.com/store/apps/details?id=com.jumobile.manager.systemapp&hl=en <-- this is very useful as well
Another tool I found very great and you run this from your computer is Debloater: http://forum.xda-developers.com/android/software/debloater-remove-carrier-bloat-t2998294
Hope this helps. I'm trying to currently work on a way of creating custom odin flashable roms so I can optimize roms to the best of my ability and provide the community with more options as well. This is still a work in progress though. :S
EDIT:
Here is an output of my program list. It was too long for me to post directly in the message
adb shell pm list packages -f
thanks a lot!
I have read about ENG boot being an improvement as well, yet nobody is stating that it is stable as it is prior to root, just improved lag, performance and stability. I know in my experience, root, for the first time in 8 years of rooting is not worth the benefits. This is sad. Must be stable. (in addition -no roms, no nanroids, no samsung Sumsung Pay..etc..etc..) So I'm hopeful things will change soon, or will be forced away from Samsung. Tmobile privacy invasion issue, and bait-and-switch with their plans is even further less encouraging news. Imagine "unlimited" = less.... wow.
Well said, and I completely agree. I've been a BIG fan of previous Samsung models, but it seems with every new model that comes out there are less and less options for customizations. I'm currently in the process of trying to figure out how to repack tar.md5 files *properly*.
I've gotten close, but then it fails right at the very end. I'm still waiting for a response from someone hopefully with more knowledge than I, but I guess I have to be patient. Here was my thread: http://forum.xda-developers.com/tmobile-galaxy-s7/help/creating-flashable-odin-file-t3500139
Any way, I'd love to see more customization for the S7. I think it's a great phone and it has so much potential. I also love android and always felt it gave users more ability for customization as opposed to Apple. Like you, I just hate all the bloat ware and all the crap that comes on phones these days. Not only that but the markup price is ridicules. Having to pay $600+ for a phone that is "laggy" due to all the bloat on it is frustrating to say the least. This is why I'm trying to give the community more options or at least steer them in a direction to customize their devices easier. Currently despite all the various amounts of software that is provided through this community I feel like there aren't too many people that know how to properly use it.
Any who, good luck with your phone. Let us know if you figure anything out with it. Also, are there any significant advantages with the newest firmware over the PIA? I usually like to hold off from upgrading right away so that all the "kinks" get worked out first since it's difficult to downgrade afterwards.
xena499 said:
I' m hoping some experts can chime in.
I rooted PK1 about 10 days ago. Followed the Verizon S7 forum that had clear instructions, and used the v15 fixes + debloater.
I made sure the governors were set to interactive.
Despite all this, my phone was extra buggy and had lag, compared to stock. It seemed to get worse with time.
Then on day 6, after root, my phone started boot-looping on the tmobile logo and vibrated.
I un-rooted back to PIA, and tmobile still seems to be monitoring hotspot use, I thought was part of the PK1 OTA.
So, my questions are:
1) are those rooted on PK1 stable, like stock? OR is there still stability issues, beyond adjusting the governors to interactive?
2) what are people using to successfully circumvent tmobiles new hotspot throttle. ( .5kbs or pay $25 per month).
xtether module in xposed, or WiFi Tether Router (root). ??
what is working?
thanks in advance !
Click to expand...
Click to collapse
I was rooted stock and I used the fixes.zip , I stopped using the debloater because my phone had issues after.
Its bootlooping because you accepted the security update popup.
You know what, that happened to me once, I forgot. What I needed to do is reflash the ENG boot file then when I got back into the phone, remove and reinstall SU. After your phone restarts, go into playstore --> you apps --> and uncheck "Auto Update" for Super User.
KillerClaw321 said:
I was rooted stock and I used the fixes.zip , I stopped using the debloater because my phone had issues after.
Click to expand...
Click to collapse
thanks I tried going back to PIA and used fixes only, as the debloater might be the culprit !
I got it work now here:
@xena499 How were you able to downgrade the firmware? I tried downgrading through ODIN and it wouldn't let me.
m0d hipp¥ said:
@xena499 How were you able to downgrade the firmware? I tried downgrading through ODIN and it wouldn't let me.
Click to expand...
Click to collapse
yes. If your using the firmware in the verizon rooting forum, that stumped me too. It doesn't work.
Must be PIA (sept 27) or newer. I got the firmware from here The sammobile site.
and flashed fine with odin. Then used the established root method from the Verizon forum, using only the V15 fixes and NOT the bloatware remover.
Still testing the root stability (2 days driving). Seems ok, but not as stable as stock so far, but acceptable for me. Cool, no battery drain, but have noticed some lag/ and buggy things that I'm deciding whether or not was a settling that was not apparent on stock w/o root.
In addition, when I was given this loaner phone from the N7, the store migrated all my data and apps using the built in sammy prog. I was concerned how this would affect my phones performance in the long run. 3 "upgrades"/ swaps later of the same technique of migrating apps/settings/data between different phones took it toll. So the bootloop issue earlier forced me to unroot and start fresh, without a choice.... The proper PIA flashed on my device (no root of course) was rock-sold stable for the few days I tried it.
xena499 said:
yes. If your using the firmware in the verizon rooting forum, that stumped me too. It doesn't work.
Must be PIA (sept 27) or newer. I got the firmware from here The sammobile site.
and flashed fine with odin. Then used the established root method from the Verizon forum, using only the V15 fixes and NOT the bloatware remover.
Still testing the root stability (2 days driving). Seems ok, but not as stable as stock so far, but acceptable for me. Cool, no battery drain, but have noticed some lag/ and buggy things that I'm deciding whether or not was a settling that was not apparent on stock w/o root.
In addition, when I was given this loaner phone from the N7, the store migrated all my data and apps using the built in sammy prog. I was concerned how this would affect my phones performance in the long run. 3 "upgrades"/ swaps later of the same technique of migrating apps/settings/data between different phones took it toll. So the bootloop issue earlier forced me to unroot and start fresh, without a choice.... The proper PIA flashed on my device (no root of course) was rock-sold stable for the few days I tried it.
Click to expand...
Click to collapse
Thanks for the response. I have a SM-G930T and the firmware I am running currently is the " G930TUVU4APIA" stock. I just am using the ENG boot file and removed a bunch of apps myself (not using the v15 debloater or fix). Any way, the PIA firmware is still a little sluggish for me, and I was thinking of going back to "G930TUVU3APG1", but every time I try to flash it through ODIN I get an error. Something similar to "SW. REV CHECK FAIL : FUSED : 4, BINARY : 3".
And I didn't think that a verizon firmware would work on a tmboile phone? They're completely different hardware? Like GSM vs CDMA? Or am I missing something?
m0d hipp¥ said:
Thanks for the response. I have a SM-G930T and the firmware I am running currently is the " G930TUVU4APIA" stock. I just am using the ENG boot file and removed a bunch of apps myself (not using the v15 debloater or fix). Any way, the PIA firmware is still a little sluggish for me, and I was thinking of going back to "G930TUVU3APG1", but every time I try to flash it through ODIN I get an error. Something similar to "SW. REV CHECK FAIL : FUSED : 4, BINARY : 3".
And I didn't think that a verizon firmware would work on a tmboile phone? They're completely different hardware? Like GSM vs CDMA? Or am I missing something?
Click to expand...
Click to collapse
NO you need the Tmobile files, available in links here, or better from the sammobile.com site i mentioned above.
I would never flash verizon firmware on a tmobile-connected phone.
In addition, are you following the verison unroot method from the verizon s7 rooting guide? the verizon root references for me were just where the best info is for all S7 people, but the software links are to older firmware that didnt work...
Basically, you are using odin to flash ALL files at once (ie AP, BL, CP, CPC), then you are back at tmobile stock as per date of package used (PIA, PG1..etc).
Earlier versions before PIA do not flash, for me. I believe this is b/c i took an OTA security update that did something to prevent this. PIA worked fine for me, and is working not bad.
I'm satisfied for now, and I will wait for stable Nougat before anything else, and done with customizing and playing.
I hope this helps you
m0d hipp¥ said:
Thanks for the response. I have a SM-G930T and the firmware I am running currently is the " G930TUVU4APIA" stock. I just am using the ENG boot file and removed a bunch of apps myself (not using the v15 debloater or fix). Any way, the PIA firmware is still a little sluggish for me, and I was thinking of going back to "G930TUVU3APG1", but every time I try to flash it through ODIN I get an error. Something similar to "SW. REV CHECK FAIL : FUSED : 4, BINARY : 3".
And I didn't think that a verizon firmware would work on a tmboile phone? They're completely different hardware? Like GSM vs CDMA? Or am I missing something?
Click to expand...
Click to collapse
Getting the same Error while flashing from PK1 to PG1... My phone getting hot after PK1 update. Please help.....
Any luck?
sardor_x_z said:
Getting the same Error while flashing from PK1 to PG1... My phone getting hot after PK1 update. Please help.....
Click to expand...
Click to collapse
I need help with the G930TUVU4APK1 update as well. I can flash the TAR file, but I cannot run the root files.
silversusanoo said:
I need help with the G930TUVU4APK1 update as well. I can flash the TAR file, but I cannot run the root files.
Click to expand...
Click to collapse
I just rooted mine this morning. I played around with it a few times. What worked for me was run root.bat with my phone unplugged then plug it in. It took a few minutes for everything to go through. Hope this helps.
Sent from my SM-G935T using XDA-Developers Legacy app
Also would like to know bypass for limited tether greatly appreciated
Sent from my SM-G935T using XDA-Developers Legacy app
Been gone a long time as you can see. I've been running Bonestock 3.4 for a few years because I was under the impression from reading that I would lock bootloader if I took the 4.3 or 4.4 update and brick if I subsequently tried to flash anything from there. And time goes by. Lately phone has been locking up so I did a restore back to Bonestock 3.3 and everything seems ok until I get message stating SuperUser binary needs to be updated and when I do phone locks again so I don't update it anymore. I can see a lot of great work has been done since I've been away and we're up to Nougat. Question is "What steps can I take to flash one of these new roms on the new builds or can I just go ahead and do it?" Also from reading I see that SuperUser seems to be an app of the past. Is there something better now? As I said, I've been gone a long time. Thanks in advance.
Sent from my SCH-I535 using XDA Premium 4 mobile app