Related
Hello,
I am a noob at this so please bear with me.
I have a Telus TP2 and I have unlocked it using the software provided by Olipro.
My objective is to switch my network over to Telus' new UMTS network, using one of their sim cards. Right now it is functioning on Telus' CDMA network.
My question is: Do I need to flash a new Radio to accomplish this? My phone still has the 2.05.00 WV radio on it now. I just need to know if I need to go get a WU radio in order to use Telus' new network.
Thanks in advance.
Hedake said:
Hello,
I am a noob at this so please bear with me.
I have a Telus TP2 and I have unlocked it using the software provided by Olipro.
My objective is to switch my network over to Telus' new UMTS network, using one of their sim cards. Right now it is functioning on Telus' CDMA network.
My question is: Do I need to flash a new Radio to accomplish this? My phone still has the 2.05.00 WV radio on it now. I just need to know if I need to go get a WU radio in order to use Telus' new network.
Thanks in advance.
Click to expand...
Click to collapse
The Telus TP2 supports UMTS 2100.
Telus uses UMTS 850/1900 for its 3G network.
In order to get the TP2 running on the UMTS network you'll want to grab a ATT GSM variant from the states and unlock that.
IIRC, Telus is jumping straight to WCDMA/UMTS so it won't be supporting the standard GSM bands. If that's the case, then your Telus TP2 variant won't have anything to lock onto when it is in "GSM Mode."
Ah dang, I guess I didn't really need to unlock the sim on my phone then because it won't work on Telus' UMTS network...
Oh well, if I decide to go back to Rogers I believe that the Telus TP2 will operate on their GSM network.
Follow up question:
Do I need to get an unlocked Radio to use the Telus TP2 on Rogers' GSM network or will the 2.05.00WV one that I have on now work?
yes, you'll need a WU unlocked radio in order to access GSM radios in the states, and canada as well, i believe.
You can find the link here:
forum.xda-developers.com/showthread.php?t=578659
Hedake said:
Ah dang, I guess I didn't really need to unlock the sim on my phone then because it won't work on Telus' UMTS network...
Oh well, if I decide to go back to Rogers I believe that the Telus TP2 will operate on their GSM network.
Follow up question:
Do I need to get an unlocked Radio to use the Telus TP2 on Rogers' GSM network or will the 2.05.00WV one that I have on now work?
Click to expand...
Click to collapse
It depends on the specific radio firmware in the device.
If it is like the Sprint TP2, then yes, you would need a separate radio. Sprint does not SIM lock its TP2, however it ships them with crippled radio software which has the 850/1900 GSM bands disabled so that it won't work with US GSM carriers (it simply doesn't see the network).
If it is like the Verizon TP2, then no, you would not need a separate radio, though you would need a SIM unlock. Verizon doesn't cripple the radio software in its TP2. It simply uses a traditional SIM lock.
I've heard that the Telus TP2 is like the Sprint model, but I've not seen one to verify.
If you're not sure, then you can always flash the unlocked radio (assuming you're using the unlock software from Oli) and it'll work.
Hey thanks for the information gamescan. I scoured the Telus Mobility website and tried to find information about their new netowork but they just call it HSPA+. No where does it mention that it is UMTS or GSM. Oh well, now I know a little bit more about cell phone tech.
I don't even know if theres any real benefit to being on Telus' UMTS network compared to their CDMA. Im sure there has to be something....
Hedake said:
Hey thanks for the information gamescan. I scoured the Telus Mobility website and tried to find information about their new netowork but they just call it HSPA+. No where does it mention that it is UMTS or GSM. Oh well, now I know a little bit more about cell phone tech.
I don't even know if theres any real benefit to being on Telus' UMTS network compared to their CDMA. Im sure there has to be something....
Click to expand...
Click to collapse
Quick 3G primer:
W-CDMA and UMTS are the name of the tech. It's also referred to as FOMA in Japan. Phones generally standardize on the UMTS name, so when you're poking around in your phone and see UMTS followed by a number, that indicates the frequency band that the phone will run on in 3G.
HSDPA, HSUPA and HSPA+ are all further revisions to UMTS. They allow for greater speeds on existing infrastructure so long as both the handset and tower support it.
A rough CDMA equivalent would be EVDO and EVDO Rev A. Older UMTS handsets will still work on a HSPA+ network, they just won't run on HSPA+ speeds the same as a EVDO handset will work on a Rev A network, just not at Rev A speeds.
UMTS is often referred to as "GSM" though that is a misnomer. GSM and UMTS are two separate (but concurrent) technologies. While they often exist together on networks that have been GSM and upgraded, they do not have to exist together. You can have a situation where a UMTS network exists but an underlying GSM "2G" network does not.
The most well known example of this is in Japan where GSM never rolled out, but in your case, where Telus is adding UMTS to an existing CDMA2000 network, is similar.
From a user perspective, there is no real reason for you to want to run UMTS over EVDO on Telus. Telus should have greater EVDO coverage so that's what you'll be wanting.
If you really want to run on the Telus UMTS network, look for an ATT branded Touch Pro 2 and get that. Of course that will not run on the Telus EVDO network.
Thank you again sir! I appreciate the replies.
Just curious about one thing, if Telus' new UMTS network isn't really any better than their CDMA right now, then why do they promote it as such a big deal?
I think I read that in order to evolve into the next big cellphone phase (forget the name) that this UTMS network was necessary but why would anyone care what network they are on as of today?
Also, do you know why CDMA is not the "way of the future" so to speak? I know Telus spent millions upgrading and putting in new towers all over...maybe I should go google this stuff lol.
The future is LTE (which is neither CDMA or GSM).
As for why Telus made a hop to UMTS before going to LTE, I couldn't tell you.
All I can envision is that Telus is looking to be more compatible globally with Europe and Japanese business travellers. It may also be a strategic decision to open up compatibility with more possible phone manufacturers.
Putting 1XRTT CDMA + EVDO + UMTS into a phone is an engineering pain. Adding in multiple frequency support (and properly tuning the antenna) is also a pain. HTC aside, many manufacturers are supporting GSM/UMTS because that's what carriers have. The biggest CDMA markets are the US, Canda and South Korea. While it is a lot of people, it also requires another phone variant.
By overlaying a UMTS network, Telus can suddenly work with any handset that supports UMTS 850/1900. That's what's used by ATT in the US. UMTS 850 is also popular in Australia while Europe and Japan use UMTS 2100. T-Mobile US uses UMTS 1700. Many UMTS phones offer tri-band UMTS 850/1900/2100 support. With one of those phones you can run on just about any current UMTS network in the world (excepting T-Mobile US).
Again, this is just conjecture on my part, but they are possible reasons.
Ok, so I've searched all over and haven't had much luck. I have no experience with cdma phones, as t mobile is all I've ever had.
I was given a new US Cellular HTC Hero s. I opened it up and saw the sim slot and though, sweet I can replace my sensation with it (I smashed the screen pretty bad). Well, that was a no go, as the phone is cdma. Looking online though, I see it can run in gsm (options global mode, cdma mode, gsm / umts mode. I unlocked the bootloader using the htc site (not sure it matters) and popped in my sim card again, and tried both global and gsm mode, though neither got signal or would dial out. (under networks, it had the tmo apn info.)
So, is the GSM mode offered on this phone only for non US bands? Would a custom rom (now or down the road) allow it to work on tmo? I read something about the HTC Merge and someone being able to switch out the modem in the rom that allowed it to work in the US, but that is well beyond me. I can follow instructions, work ADB and flash roms.. but thats about it.
Is it possible, or will it soon be, to have this phone work on GSM or am I just stuck trying to sell it as a us cellular phone (or perhaps another cdma carrier.. like I said, I don't know anything about cdma)
As a Canadian I'm not sure about who owns US cellular or if they are their own company but I'm guessing they work like Verizon world phones. They have sim card slots but will work only outside of the US. If those verizon phones are used within the States, they will only pick up Verizon's frequency, as opposed to T-Mobile or AT&T where you can unlock them and use them with any GSM carrier within the States. But yeah, you can unlock it and it will work with any GSM carrier outside the States but within the States I think it will only work under US Cellular CDMA network...please correct me if I'm wrong.
That's right, u.s. cdma "world phones" have gsm radios but are locked down from connecting to gsm networks in the u.s. This is not just the normal sim lock found on gsm phones but they are hard coded to ignore u.s. gsm networks.
Some have been unlocked to work on any network through various methods including flashing a modem from a non-us varient of the same phone and other hacks. I can't comment specifically on this phone however.
Sent from my SPH-D700 using XDA App
Well, that points me in the right direction, and confirms what I read about swapping modems (on the other phone mentioned).
So basically it's software telling it not use a certain frequency, and not that the phone itself is incapable of picking it up (had my doubts about that)
Pretty shady the way phone companies are allowed to operate (don't get me started on my unlimited internet in my contract [pre data caps in tmo]. "Hey! check it out, this phone uses data 5 times faster than your old one, oh, and you get half as much too) sorry, end of rant.
I'll keep searching, and post if I find something..
On a side note, can cdma phones be flashed to another cdma carrier like verizon or sprint, or is it the same deal, coded to only use a certain frequency range?
only thing I've heard of is flashing sprint and verizon phones to cricket, metro pcs and boost.
Hello
It sucks being an european and to have a 4g/cdma phone because in my country (Romania) you dont have a cdma network
So as we all know the Thunderbolt has the same chipset as the Rezound so in theory it should be able to transform into a Global Phone.
My question is why didn't anyone do that and how i can make one myself if a dev dosent bother.
I feel it in my guts that this will work but i need some guidelines, or someone with actual knowledge to help me.
charris said:
Hello
It sucks being an european and to have a 4g/cdma phone because in my country (Romania) you dont have a cdma network
So as we all know the Thunderbolt has the same chipset as the Rezound so in theory it should be able to transform into a Global Phone.
My question is why didn't anyone do that and how i can make one myself if a dev dosent bother.
I feel it in my guts that this will work but i need some guidelines, or someone with actual knowledge to help me.
Click to expand...
Click to collapse
Thunderbolt doesn't have the hardware. Not possible.
and what hardware are you talking about?
Thunderbolt has a CDMA radio and an LTE radio. Global phones need a separate GSM radio to work in Europe. If it has an unlocked SIM, the Thunderbolt should work on any 700mhz band LTE network, but is incompatible with GSM on all levels.
Sent from my ADR6400L using Tapatalk
MDM 9600
Actually, the Thunderbolt has an MDM 9600 baseband chipset that supports Hspa and Hspa+ which is a technology that At&t and T-mobile uses for their data connections. So, I believe that if the LTE radio is backwards compatible with those frequencies of At&t or T-mobile that it might work. The thunderbolt has two antennas: one for strictly CDMA and the other for lte and backwards compatibility to gsm/hspa(+) from what I understand. From what I have read Verizon has just opted to not install the drivers to support the GSM/HSPA(+) side of things. That, and the MSM 8650 processor or other hardware in the Thunderbolt may not support it. Just because the modem supports GSM/HSPA(+) doesn't mean the phone will, but I do think that if someone really wanted to they could modify the thunderbolt to work on GSM. The may need more hardware, but I do not know.
I would post the link about the chipset I have, but sadly as a noob it will not let me.
P.S. Verizon allows you to log-in to your account and view the unlock code for the thunderbolts SIM yourself. You do not have to call them. I have not used another Carriers SIM in my Thunderbolt, but HAVE read about people who have in other threads. Verizon from what I understand and have read on other forums does not allow you to use USA SIM cards other than VERIZON'S own SIM. From what I have read, it only unlocks the phone to use foreign country SIMs only. From what I had read, once you use VERIZON'S SIM unlock procedures a NEW menu pops up in your network settings giving you the option to select to use GSM only. The same thread was speaking about the iphone 4s and the Thunderbolt and said that Verizon allows for both to be unlocked and used as World Phones. I will not know for sure until I see proof, but I do know that Verizon allows you to unlock the Thunderbolt's SIM to use on Foreign Networks.
The MDM9600 baseband definitely supports quad-band GSM. However, the RF transceiver in the Thunderbolt may or may not, and the power amplifiers definitely do not. You need all three in order for a mode & band to actually work on a device.
Not possible from a hardware point of view.
Dear All,
I recently got this device in Hong Kong and is hapi with its performance!
But I am still wondering if this device could actually use the LTE available in HK?
I knw the msm8960 claimed to be capable of utilizing all frequency of radio,
so is it possible that there is some soft lock in the baseband?
Could i flash the baseband or replace the modem driver from other device to access other frequency?
any idea is appreciated!
Thanks!
Vasco
I think it has to modifiy the ROm and the hardware
I tried to figure out, if our Photon Q is supporting more LTE bands than 1900 MHz (#2 or/and #25).
-> http://en.wikipedia.org/wiki/E-UTRA#Frequency_bands_and_channel_bandwidths
On some sites there are reports for having another band. (Have to search again, I think it was 850 MHz, #26 or 700 MHz, #12/#17/#29.)
I have also searched for supported frequencies for MSM8960.
I found some BlackBerry devices based on that SoC and 2 different versions of supported LTE bands.
One version (UK) supported 4 in europe used bands und the other version (US) supported 4 in US/Canada used bands.
I think that the Photon Q is like the BlackBerry US version and supports 4 LTE bands in US/Canada.
If you need a few sites, I will search again and show it to you.
The strange thing is, if I set to LTE only (via 4636) I can see all 4 carrier (germany).
We have 3 bands with LTE on it, but I can only get signal to max 2 of them.
Band 3, 7 and 20 (1800, 2600, 800 MHz).
The weird thing is, that on band #20 (800 MHz) only 3 carrier are active, so it has to be band #3 or #7.
Maybe I'm missinterpreting things and thats just a sideeffect of crossing bands of LTE US and UMTS Germany.
On stock ROM there was another "secret phone code" to see what the phone-part is doing. (From qualcomm I believe.)
I think I will test it some other day, to see which band is active.
At last, I was never been able to "login" or "register" into my carriers network within LTE.
Please discuss about that possibility, I really want to find out, which frequencies are supported by our phone on LTE.
Loader009 said:
I tried to figure out, if our Photon Q is supporting more LTE bands than 1900 MHz (#2 or/and #25).
-> http://en.wikipedia.org/wiki/E-UTRA#Frequency_bands_and_channel_bandwidths
On some sites there are reports for having another band. (Have to search again, I think it was 850 MHz, #26 or 700 MHz, #12/#17/#29.)
I have also searched for supported frequencies for MSM8960.
I found some BlackBerry devices based on that SoC and 2 different versions of supported LTE bands.
One version (UK) supported 4 in europe used bands und the other version (US) supported 4 in US/Canada used bands.
I think that the Photon Q is like the BlackBerry US version and supports 4 LTE bands in US/Canada.
If you need a few sites, I will search again and show it to you.
The strange thing is, if I set to LTE only (via 4636) I can see all 4 carrier (germany).
We have 3 bands with LTE on it, but I can only get signal to max 2 of them.
Band 3, 7 and 20 (1800, 2600, 800 MHz).
The weird thing is, that on band #20 (800 MHz) only 3 carrier are active, so it has to be band #3 or #7.
Maybe I'm missinterpreting things and thats just a sideeffect of crossing bands of LTE US and UMTS Germany.
On stock ROM there was another "secret phone code" to see what the phone-part is doing. (From qualcomm I believe.)
I think I will test it some other day, to see which band is active.
At last, I was never been able to "login" or "register" into my carriers network within LTE.
Please discuss about that possibility, I really want to find out, which frequencies are supported by our phone on LTE.
Click to expand...
Click to collapse
Dear Loader009,
Thanks for your information! I'm really impressed that you could actually search the carrier in 'LTE only from Germany!
Could you please share the version of ROM you are using?
And if possible, any screenshot? I really want it can be used in HK with LTE(1800, 2100 & 2600Mhz)
Also do you have more information about the secret phone code? I think it would be interesting
Actually, I noted that xt925 and xt905 are using the same chip MSM8960 with LTE usable in HK.
Is there anyone can locate the radio/baseband of their rom and port it for XT897?
I am willing to try it with my machine.
If this work, I think we could use this photon q all over the world!
Any idea?
Regards,
Vasco
disablewong said:
Dear Loader009,
Thanks for your information! I'm really impressed that you could actually search the carrier in 'LTE only from Germany!
Could you please share the version of ROM you are using?
And if possible, any screenshot? I really want it can be used in HK with LTE(1800, 2100 & 2600Mhz)
Also do you have more information about the secret phone code? I think it would be interesting
Actually, I noted that xt925 and xt905 are using the same chip MSM8960 with LTE usable in HK.
Is there anyone can locate the radio/baseband of their rom and port it for XT897?
I am willing to try it with my machine.
If this work, I think we could use this photon q all over the world!
Any idea?
Regards,
Vasco
Click to expand...
Click to collapse
Of course, I was just blind guessing the hardware for xt926 and xt907 are using the same hardware.
If not, there should be one chip controlling the modem channel of the device to be replaced.
But WHICH ONE???
Any expert in this area can solve this question? I am a dummy for radio stuffs
This seems like it's getting pretty interesting.
Sent from my XT897 using Tapatalk 2
Dear all,
I'm also very interested in this topic since I imported a Photon Q to Germany and was wondering if it's possible to use the local LTE 800/1800/2600 bands.
I think the first thing we have to find out is whether the hardware is capable of using other bands than the 1900 band listed on the Motorola website. As Loader009 states he could see LTE carriers which are known to use different bands I assume the hardware can do it. Otherwise the carriers wouldn't have been listed, right? Maybe someone from another country with different frequency bands can check and confirm that he can see those carriers as well?
Thus, the limitation to the 1900 band should be software-made and could be modified by a developer. I hope someone can participate at that point as I don't know much about coding...
I'm using CM10.1.
I can't remember the secret phone code, I have to do research again.
This secret phone code only works on Stock ROM. (I stupidly deleted it, when it wasn't working on CM10 anymore.)
The one secret phone code I used to force "LTE only" was *#*#4636#*#*.
Please DON'T change the baseband (don't even tap on it).
This can do problems to you. (I had to use QPST to recover the supported frequencies.)
Also, developers (afaik) can't modify the modem firmware.
We also don't even know, which LTE bands the Photon Q is capable of. (Except 1900 MHz)
I've got my 32GB SDCard back and will test it in the next few days out.
I hope I'll find that secret phone code, I'll also make a few screenshots.
Got the code!
##33284# <- ##DEBUG#
It only works on stock afair!
I'll test tomorrow, it's about 3am now >.<
disablewong said:
Dear All,
I recently got this device in Hong Kong and is hapi with its performance!
But I am still wondering if this device could actually use the LTE available in HK?
I knw the msm8960 claimed to be capable of utilizing all frequency of radio,
so is it possible that there is some soft lock in the baseband?
Could i flash the baseband or replace the modem driver from other device to access other frequency?
any idea is appreciated!
Thanks!
Vasco
Click to expand...
Click to collapse
I have read the "QU_SnapdragonS4_White_Paper_FNL_Rev6.pdf" and found there following entry:
-----------------------------------------------------------
• Industry’s first fully integrated 3G/4G world/multimode LTE Modem: <<<Supports all of the world’s leading 2G, 3G and 4G LTE standards>>>.
It also includes integrated support for multiple satellite position networks (GPS and GLONASS) as well as short range radios via Bluetooth,
WiFi, FM and NFC.
• Designed for speed, compatibility and power savings:
Snapdragon S4 Processor MSM8960 chipset includes the industry’s only complete platform that integrates all of the world’s leading 2G, 3G and 4G mobile broadband modem technologies on a single chip. This new integrated multimode modem is based on an advanced, programmable architecture that is performance, size and power optimized for the fastest combination of modems available for:
- LTE FDD/TDD (Cat3)
- 3G (DC-HSPA+ Cat 24)
- EV-DO Rev. B
- 1x Advanced
- TD-SCDMA
- GSM/GPRS/EDGE NFC.
Multimode/Multiband Means Worldwide Coverage.
• Support for multiple radio frequencies: Mobile broadband technologies are growing increasingly complex in their implementation. LTE is currently being implemented in over 40 diff erent radio frequency bands throughout the world. To complement its wide range of modem standards supported, Qualcomm has designed the Snapdragon S4 Processor MSM8960 CHIPSET platform to <<< address all commonly-used frequencies (from 700–2600 MHz) and bandwidths up to 20 MHz>>>, allowing its customers to address any mobile network opportunity whether the simplest single frequency implementation to the most extensive multi-frequency global mode, whether 4G, 3G or 2G.
-----------------------------------------------------------
Based on the document the chip can handle all LTE Standards, but it depends on his "advanced, programmable architecture"....as written there and how Motorola / Sprint implemented this, maybe they reduced LTE only to one Standard.
I don't have LTE in my area and so I cannot test this.
That's possibly right.
Something else:
If I remember correctly, somewhere in this forum have been said that for CDMA the internal Sprint "ID"(?) is used.
Maybe that's also the reason why I cannot connect to LTE in my area.
The phone is trying to "login" with the Sprint ID and this of course won't work.
The ##DEBUG# menu wasn't helpfull. It shows frequencies for american standards and not for GSM/WCDMA.
Also the LTE menu is also not very helpfull, it doesn't show frequencies at all.
Any News on this topic?
Maybe one of the developers can give a statement?
Yesterday I tested a LTE compatible SIM card.
My Bro has a Samsung Galaxy S4 with 4G/LTE in my area.
So I've put his SIM-Card into my Photon Q and set LTE only.
I had no luck, the Phone couldn't register into the network for this SIM.
I guess either it has the wrong frequencies or LTE is for inbuilt "SIM" (Sprint SIM?) only.
The latter. LTE is configured only for 1900 MHz which Sprint uses.
LTE is configured only for Sprint's frequencies, however, it supports the United States frequencies of PCS blocks A-G. The G Block is Sprint's current LTE channel, and they may deploy it later on Blocks A through F, depending on if they own the spectrum in a given market. The reason you see EU networks when the phone is in LTE Only Mode is most likely because the Phone still sees GSM signals, but will only connect to LTE ones from those GSM signals. Likewise, in the US, if you force LTE Only and then search for networks, AT&T and T-Mobile US will come up as the GSM carriers the Photon Q sees, rather than the LTE signals it sees.
Setting the Photon to LTE Only will not do anything for LTE in the EU. I suspect that if another carrier in the EU uses the 1900 MHz for LTE, the Photon Q will have no issues connecting to LTE in Europe. But until that time, be happy with HSPA.
Skrilax_CZ said:
LTE is configured only for 1900 MHz which Sprint uses.
Click to expand...
Click to collapse
Can this configuration theoretically be changed / other frequencies be added?
Only if you break BP security.
Skrilax_CZ said:
Only if you break BP security.
Click to expand...
Click to collapse
Sorry, what's that?
IIRC The only place with 850mhz LTE available is the Chicago market and currently no phones at all support it. :crying:
Not only does your phone need to support it, your PRL and cell-site does too...
[Q] Can an unlocked Pantech Discover (AT&T brand) use 4G lte data on another service?
Can an unlocked Pantech Discover (AT&T brand) use 4G lte data on another service? I know it has the correct network ability (LTE 700 MHz Class 17 / 850 / 1700 / 1900 / 2100) to work at 4G lte speeds on AT&T network, but I want to know if it will work while unlocked on T Mobile (that has the same requirements). The network abilities are confirmed compatible, and is not the question, will it reach the same speed even though it is not made for the carrier (T mobile in this case). I would love to find out before I spend the money to buy it brand new and unlocked, only to see if it will work or not. And if not, I have wasted the money. I have heard that this will not work, or might now that things have changed (No real help, and makes my more cautious).
Reading everything on the internet I can find. So far I've found the conflicting answers that:
1) As long as it has the network ability, then yes.
2) No unlocked phone will reach above EDGE speeds on another carrier. (May by very outdated, but can't confirm)
3) That might not be correct, unlocked phones will not, normally, work correctly on other networks.
4) It works 100%
5) It can only reach 3G
After several calls I've found out:
1) T mobile says:
a) Should work.
b) No idea.
c) Since it has the network ability to use 4G lte with our network, it should, but I don't know.
2) Pantech
a) Just try it.
b) I think so, but I don't know.
3) AT&T (the phone is made for and sold by them)
a) Unlocking will not limit the phone.
Is "No unlocked phone will reach above EDGE speeds on another carrier" just a myth now since "Things has changed" (what ever that means)?
digi2600 said:
Can an unlocked Pantech Discover (AT&T brand) use 4G lte data on another service? I know it has the correct network ability (LTE 700 MHz Class 17 / 850 / 1700 / 1900 / 2100) to work at 4G lte speeds on AT&T network, but I want to know if it will work while unlocked on T Mobile (that has the same requirements). The network abilities are confirmed compatible, and is not the question, will it reach the same speed even though it is not made for the carrier (T mobile in this case). I would love to find out before I spend the money to buy it brand new and unlocked, only to see if it will work or not. And if not, I have wasted the money. I have heard that this will not work, or might now that things have changed (No real help, and makes my more cautious).
Reading everything on the internet I can find. So far I've found the conflicting answers that:
1) As long as it has the network ability, then yes.
2) No unlocked phone will reach above EDGE speeds on another carrier. (May by very outdated, but can't confirm)
3) That might not be correct, unlocked phones will not, normally, work correctly on other networks.
4) It works 100%
5) It can only reach 3G
After several calls I've found out:
1) T mobile says:
a) Should work.
b) No idea.
c) Since it has the network ability to use 4G lte with our network, it should, but I don't know.
2) Pantech
a) Just try it.
b) I think so, but I don't know.
3) AT&T (the phone is made for and sold by them)
a) Unlocking will not limit the phone.
Is "No unlocked phone will reach above EDGE speeds on another carrier" just a myth now since "Things has changed" (what ever that means)?
Click to expand...
Click to collapse
T-Mobile has different LTE speeds depending on the area you live. In southern California T-Mobile's LTE is a little faster than ATT. Since both are GSM you will definitely have 3G, if on that phone HSPA+, but not sure on LTE. I was thinking that ATT and TMobile had LTE on different frequencies as they do not use the same towers etc.