i wanna install cm10 on my tipo.. so download FXP152 and flash boot.img from the directory.. and phone got bricked 'couse fxp152 boot.img is not working.. but i got my phone back. (THanks To satan89).. ANd i flash FXP151 boot.img and flash fXp.zip through recovery. everything going smooth and restart my phone. but my phone got bricked again. no lights, No led on corner. nothing happens.. a single vibration and then nothing. is there anybody who can help me?? how to recover from this.. now i don't wanna install the cm10.. i wanna go back to flash rom..
shubhamanand141 said:
i wanna install cm10 on my tipo.. so download FXP152 and flash boot.img from the directory.. and phone got bricked 'couse fxp152 boot.img is not working.. but i got my phone back. (THanks To satan89).. ANd i flash FXP151 boot.img and flash fXp.zip through recovery. everything going smooth and restart my phone. but my phone got bricked again. no lights, No led on corner. nothing happens.. a single vibration and then nothing. is there anybody who can help me?? how to recover from this.. now i don't wanna install the cm10.. i wanna go back to flash rom..
Click to expand...
Click to collapse
Did you replace the boot.img in the zip file with the fxp 151 boot.img as well? If not, you have again unknowingly flashed corrupted boot.img.
Just fastboot 151 boot.img again
For stock ROM enter flashmode, download ftf, flash with flashtool.
satan89 said:
Did you replace the boot.img in the zip file with the fxp 151 boot.img as well? If not, you have again unknowingly flashed corrupted boot.img.
Just fastboot 151 boot.img again
For stock ROM enter flashmode, download ftf, flash with flashtool.
Click to expand...
Click to collapse
why you didn't mention it first time ???
and this time my phone is not blinking a single light so i can't boot my phone into flashmode.. so what to do now ???
If you looked through the fxp thread, just the last couple of pages, you would have figured it out. How was I to know you just saw instructions in first post and decided to flash rom?
Are you pressing power + volume down and holding them when phone is switched off? Green led should blink
Sent from my ST21a
satan89 said:
If you looked through the fxp thread, just the last couple of pages, you would have figured it out. How was I to know you just saw instructions in first post and decided to flash rom?
Are you pressing power + volume down and holding them when phone is switched off? Green led should blink
Sent from my ST21a
Click to expand...
Click to collapse
finally i flashed the rom correctly but it's too slow. (lagging, hang on lock screen, auto restart, taskbar problem). how to speed up rom..
shubhamanand141 said:
finally i flashed the rom correctly but it's too slow. (lagging, hang on lock screen, auto restart, taskbar problem). how to speed up rom..
Click to expand...
Click to collapse
I too have noticed the issues with this rom and am now having difficulties getting flashtool to flash my phone back to stock rom. I am planning some minor tweaks to stock once i get it back, any ideas on why flashtool is sticking at 0% and wont flash my phone?
FYI I have left it for hours and it still stuck at 0% so its not that Im not giving it chance, also i have tried 2 separate USB ports and 2 PC's other than this one so i think its something phone based not PC based...
I sort out my problem myself.. i flash new gapps and restart my phone twice and now everything is better than OK.
Related
Hi, i wanted to upgrade my rom from black dragon 4.5 til 5.0 but as i was in a bit of a hurry i failed to read the innstalation notes..
So i just flashed the rom.zip from cwm touch and tried to reboot, now im stuck in a bootloop with the HTC screen with the red writings and a blackscreen.
I cant seem to be able to power-off my device either, i guess i have to let the power run out..
Is there any way i can fix this and flash mayby LeeDroid rom or is my phone permanently bricked?
rom.zip from an RUU ??
If it wasnt, most custom roms require the boot.img to be flashed.
Plug your phone in via USB and use adb to do a full factory reset, Flash boot.img and flash the rom
you should be good to go in no time
azzledazzle said:
rom.zip from an RUU ??
If it wasnt, most custom roms require the boot.img to be flashed.
Plug your phone in via USB and use adb to do a full factory reset, Flash boot.img and flash the rom
you should be good to go in no time
Click to expand...
Click to collapse
yep what he said you can also hole power button for a bit and it will power of the phone
^^What they said. You need to fastboot yourboot.img through adb. Since that rom has the base upgraded to 1.78, you need to update your boot.img, it's provided right under the logo.
Hello,
I was trying to install CM10 mod.Everything worked fine but I misjudged something.We had to place .zip file itself but I extracted it and then wiped all data and cache.Now I am unable to place it again.I don't know how to place the zip file in sdcard again.Please help me urgently...
Thanks,
Centurian
If you can enter cwm, mount USB, then use this app to push file to /sdcard
http://forum.xda-developers.com/showthread.php?t=1599332
Sent from my ST27i
that worked now...I sent the zip file to sdcard but now while flashing it aborts everytime....Error Status 7 comes...
Please suggest something..
Thanks
Mr.Centurian said:
that worked now...I sent the zip file to sdcard but now while flashing it aborts everytime....Error Status 7 comes...
Please suggest something..
Thanks
Click to expand...
Click to collapse
Ya happened to me too reboot into recovery, try again, if not working reboot recovery again or battery pull and enter recovery, it worked after a couple of tries for me.
Sent from my ST27i
Hey,It flashed now..I did from FXP152 tapioca...
But now,when rebooting it there is no reponse...The screen is completely dead,no response from anything...What should I do next??
Mr.Centurian said:
Hey,It flashed now..I did from FXP152 tapioca...
But now,when rebooting it there is no reponse...The screen is completely dead,no response from anything...What should I do next??
Click to expand...
Click to collapse
Oh dude are you serious? Why aren't you following the development thread (or even this q&a section) ?
It's been told way too many times fxp152 boot.img is bugged and not bootable
Now download fxp 203 ( or 204 but better leave testing to others and read bugs before flashing)
Fastboot 203 boot.img and same instructions as above.
Sent from my ST27i
But my phone is blacked out...no response...What should I do first to make it working to recovery mode??
It can still enter fastboot mode. Power + vol up when phone is switched off. Or remove battery, open flashtool on pc, press vol up and plug USB
Sent from my ST27i
thankss....it worked!!!
thanks alot
Phone model: Sony Xperia Tipo ST21a
CM version:FXP217-CM10
CM Download url:http://d01.unr.li/dl/127ddadae799c/FXP217-cm-10-20130427-UNOFFICIAL-tapioca_ss.zip
Dear friends i have flashed the FXP217 to my device and i wiped data and dalvik and partition before and after instalation
after rebooting my device i was shocked , white screen i was waiting and trying to get into boot but still white even after pink led
to get to the boot it give me blue led but still white screen, please any help.... fastboot not work too
if i let the device stay on white screen with green led
it's not dead, dead is when it won't even vibrate when you power it on.Remove battery, put it back after 5 seconds, and flash a new firmware with Flashtool.And when you install CM this time, DON'T WIPE anything after installing CM.
It's merely soft-bricked.
I suggest you to try to reflash CM10, you might want to flash 216 check if that one works.
Wipe your stuff BEFORE flashing the ROM itself.
+ Have you flashed the boot.img correctly?
Regard, Drago
Same happened with me too, heres the fix:
http://forum.xda-developers.com/showpost.php?p=40802279&postcount=1374
fuser1337 said:
Same happened with me too, heres the fix:
http://forum.xda-developers.com/showpost.php?p=40802279&postcount=1374
Click to expand...
Click to collapse
Thanks Guys for eveything i'm trying to flash Firmware ST21i_11.0.A.4.22_CE.ftf on my device with the flashtool:fingers-crossed:
i hope it works, i dunno what else to do
ill keep you up date:silly:
flash Firmware ST21i_11.0.A.4.22_CE.ftf with flashtool finished successfully, work good thanks guys, now ill make my CM10
me too
just flash your FXP216 boot.img kernel via cmd fastboot
i did just exactly fuser1337 did, and it work fine
how to install boot.img in dead tipo?
i hv installed a boot.img with a renamed file of boot1.img. after that my tipo doesnt respond for anything. no vibration, no led at all....
what should i do?
Hey guys, I just tried flashing CWM touch recovery however something strange has occurred. The phone went into the bootloader like normal but would switch off completely after a few seconds and now it's unresponsive with only the screen being on but completely black and the led notification light remaining orange and being on permanently. Phone isn't switching off either, any help would be super appreciated.
Go on, give us a bit more info
Such as
Have you unlocked the boot?
What firmware version/ROM are you on?
What commands did you use to flash the recovery?
Greg
Sorry, running Glade rom so CM12 and bootloader is unclocked. Command used to flash recovery was 'fastboot flash bootZ3_DooMLoRD_AdvStkKernel_v01_FW-93.img'.
My pc is registering the phone connecting but nothing else.
omz123 said:
Sorry, running Glade rom so CM12 and bootloader is unclocked. Command used to flash recovery was 'fastboot flash bootZ3_DooMLoRD_AdvStkKernel_v01_FW-93.img'.
My pc is registering the phone connecting but nothing else.
Click to expand...
Click to collapse
That kernel will only work on a stock rom. Reflash the boot.img from with in the ROM you are on OR flash a stock ROM
gregbradley said:
That kernel will only work on a stock rom. Reflash the boot.img from with in the ROM you are on OR flash a stock ROM
Click to expand...
Click to collapse
Will do, used the TWRP recovery but am reflashing back to a stock rom. The phone is still unresponsive though.
Ok so I had to reinstall drivers that were faulty and the phone was responding to commands again and have since flashed the correct boot.img. Thanks heaps
omz123 said:
Will do, used the TWRP recovery but am reflashing back to a stock rom. The phone is still unresponsive though.
Click to expand...
Click to collapse
No worries
Hi all,
after bootloader unlock, and a few other steps later. I somehow managed to softbrick my Z5.
The phone hangs on bootloader screen. I can still get into TWRP 2.7.8.0.
When rebooting from TWRP says there no OS installed.
Most of the times TWRP is unable to mount system, data etc. After managing to mount all, I tried to go ahead and install either another ROM or a boot.img, recovery.img or twrp.img.
Installing another Rom always seems to fail (and finishes way too fast), and installing another boot.img or recovery.img gives me errors like this:
[IMAGE FLASH STARTED]
Image to flash: '/external_sd/recovery.img'
Calculating restore details...
E: No partitions selected for flashing
Trying to use FlashTool doesn't work either, because I cannot get FastBoot to work either (power off, hold volume Up while attaching device to pc using usb) Only this morning did I manage to FastBoot.
How can I solve this?
Can it be solved through TWRP? by somehow using a PIT file? or any other way?
I am stumped reallly.... So maybe someone with much more knowledge can help me out? Thanks
i got a similar problem but i wasn't able to get into flashmode nor fastboot neither i was able to charge my device when i was comming from XZ Rom bcs i was so buggy but i managed to fix it by force turning it off ( power + vol up 3 vibs ) then i left the phone for 10 seconds then suddenly i entred flashmode without doing anything then i flashed the original FTF
i hope i can help you with this
iSpammer said:
i got a similar problem but i wasn't able to get into flashmode nor fastboot neither i was able to charge my device when i was comming from XZ Rom bcs i was so buggy but i managed to fix it by force turning it off ( power + vol up 3 vibs ) then i left the phone for 10 seconds then suddenly i entred flashmode without doing anything then i flashed the original FTF
i hope i can help you with this
Click to expand...
Click to collapse
Thankx iSpammer, it took me a while to reply, mainly because the battery went to 0%. so first I had to go to a local callshop to fast charge it for a while. Later at home I charged to 100%.
After that I was abled to get into the FlashTool and flash an original TFT, now the phone is also unrooted, had twrp and su, and xposed.
Thanks again, I am one happy camper
pamenja said:
Thankx iSpammer, it took me a while to reply, mainly because the battery went to 0%. so first I had to go to a local callshop to fast charge it for a while. Later at home I charged to 100%.
After that I was abled to get into the FlashTool and flash an original TFT, now the phone is also unrooted, had twrp and su, and xposed.
Thanks again, I am one happy camper
Click to expand...
Click to collapse
any time glad you got your phone bck