Database Info

[Q] Custom rom for unknown tablet

Hi,
I was planning to buy this unknown tablet: http://www.axtrom.com/product-details-7I01_1001
I just want to know if there is any way by which I can get a custom ROM on it
Maybe porting cyanogenmod to it ?
P.S.: I don't have any android developing skill

most android device can be rooted and installed a custom rom, but for starters i think this will help you
http://forum.xda-developers.com/showthread.php?t=1894668

Only tablets made by widely known companies (and some Chinese ones) may have custom ROMs
But this tablet simply doesn't have any..
I have searched the internet for one but didn't find any

Rom for AOC MG70SR
I need Rom for my tablet AOC MG70SR
Board ID : AL-2928-751_v1.0 please

iTouch i724 tablet
Hi,
I can only get Recovery mode on my tablet, iTouch i724 .
ROM is available from baidu site . The download seems completed but the IMG file shown as corrupted.
Please help if you know a way out...

I feel for you. But nothing cheap is good. I bought an unknown tablet too. My device doesn't even have a system recovery.

android lolipop for blackbird tablets/download link on xda developoers
PLEASE!

i need a rom for my tablet
playtab 7QB

Tablet in Mask Rom Mode
Hisense Sero 7 LE E2371 (White) WiFi 7" 8gb
Board ID: BS-M71GP2-H-MB-V1.0
E2371AUWJ3MA10267
Display Resolution: 1024x600
RK3026 Dual-Core Armv7 Cortex-A9
Flash Chip iNand?: Sandisk P423105451 SDTNQGAMA-008G WAE5270043 TAIWAN
Desperately need Stock/Custom Rom/Firmware!
rk3026eng.442.KOT49H?????.20140802?????
Thanks In Advance

Hello sir.., i need mione mix9 pro custom rom.. My mobile specification is 4gb ram and 64gb rom.. Can u create one custom rom for my this device and how to install cmw and how to root can u totally guide to me sir??

Looking also
Prince.boy8801 said:
Hello sir.., i need mione mix9 pro custom rom.. My mobile specification is 4gb ram and 64gb rom.. Can u create one custom rom for my this device and how to install cmw and how to root can u totally guide to me sir??
Click to expand...
Click to collapse
Hello,
up for this request i also looking for this custom rom hoping to get an update
regards
Domz

can u share me ur mione mix 9 pro stock rom?

Is it good to try any custom rom for android 6 tab with mediatek processor.

Dee_raii said:
Is it good to try any custom rom for android 6 tab with mediatek processor.
Click to expand...
Click to collapse
No, the ROM must be specifically built for your specific model number, using anything else will almost certainly brick your device.
Sent from my SM-S767VL using Tapatalk

[Help] Porting Android 4.2 from MTK6589 to MTK6577 (4.1)

Hi,
How can help me, yuweng, already help me here :
http://forum.xda-developers.com/showpost.php?p=40053384&postcount=91
But I think with more developper it will be more easy to have this working
I know nexgen, developper of the Infinity ROM manage to get it booting but don't know how, he only say to use a quad core ROM.
A ROM under 4.2 is ZP900H_4.2.1_2.5G_By_Jaynes.rar (google it)
I some can help and get a booting ROM may he can write a quick HOW-TO :good:
So the goal is to get a working Android 4.2 on MTK6577
Thanks

it will work??????I don't think so

On the russian forum, they have ported ROM from MTK6589 to MTK6577, so the porting is possible, but it was for same android version.
I want to port to Android 4.1 to Android 4.2 too.
Nexgen say he have a working Android 4.2 ROM for A888 duo / Wiko King ... so yes it must be possible

On russian board they say :
There is great news for owners of Android 4.1.2 with kernel 3.4.5 - We have the ability to port 4.2.1 without any problem! For example, I started Amoi N828 firmware on your flae Updated: With pleasure portage - Fixed Wi-Fi, GPS and fall BT, camera is not all ... I will wait followers
Click to expand...
Click to collapse

spanish_man said:
On russian board they say :
Click to expand...
Click to collapse
will check it n tell u

avinandan cool said:
will check it n tell u
Click to expand...
Click to collapse
Any news further?

jbenci said:
Any news further?
Click to expand...
Click to collapse
We are working on 4.2.1 rom for Star B92M, alpha stadium for now but if we success surely i tell you how

Simonkjam said:
We are working on 4.2.1 rom for Star B92M, alpha stadium for now but if we success surely i tell you how
Click to expand...
Click to collapse
Nice waiting for news

Any news?
Gesendet von meinem GT-I9300 mit Tapatalk 2

spanish_man said:
On russian board they say :
Click to expand...
Click to collapse
Where? Link?

Devs Plzz Port That As Soon as Possible

Refreshing - any news?
Wysłane z ZTE v970

before must getting android 4.2
we just port the kernel from the Maxx ax9Z it has 1.2GHz processor

Killer.shubham said:
before must getting android 4.2
we just port the kernel from the Maxx ax9Z it has 1.2GHz processor
Click to expand...
Click to collapse
Great, any news?

dMarx said:
Great, any news?
Click to expand...
Click to collapse
Nobody is interested in it,,
so leave it

Killer.shubham said:
Nobody is interested in it,,
so leave it
Click to expand...
Click to collapse
:crying::crying::crying::crying:
I don't think so!!!

- I don't think it'll work

I am interested...
Hey somebody do that port JB 4.2 for mtk6577, every one will love it...

Port Mtk6589 Android 4.2 to mtk6577. Only processor changes.
ANy news here_ Or alternatives. I{m really interested as well. I have a Jiayu g3 mtk6577 with Android 4.1. The Jiayu G3S is exactly the same hardware, except for the mtk6589 processor and has Android 4.2. Everything else is exactly the same. Maybe that makes it easier!?

I would love to upgrade to 4.2.2 any idea if that will ever happen?

[ROM]4.1.2 jelly Bean MT6577 ZA-985 ZYREX ONESCRIBE

DISCLAIMER : DO WITH YOUR OWN RISK ( All Credit Goes to Original ROM Make NOT ME )​
MT6577 to be more and more Popular, VARIOUS BRANDs have been released by VARIOUS VENDORs all over the world. Most of them are Clone Phone version of Big International Brand. From the little research, I have found that Zyrex OneScribe ZA-985 is IDENTIC DEVICE with KATA - i1.
ZA-985 sold in Indonesia Only and KATA i1 supposed sold in Phillipine only. Rooting method for MT6577 proved valid for almost ALL BRANDS based on MT6577 but NOT EVERY ROM SAFE TO EXCHANGE AMONG MT6577 DEVICES.
Please Check if you have :
MT6577 based device, 1 Ghz Dual Core CPU, 1 GB RAM, PowerVR SGX531 GPU, 4.5-inch qHD (960×540) IPS display (245ppi), Dual GSM Sim Feature, Physically has THREE "Hardware Button", 8 MP Rear Camera, 1.3 MP Front Camera, MT6566 Wifi chipset. I believed you have identic device with Zyrex OneScribe ZA-985 and KATA-i1 and safely flash below 4.1.2 JB ROM.
Prepare Your Device
If your device is in stock ROM, Gain Root and Back Up stock rom for revival matters, follow THIS GUIDE or any available Guides on the NET. Build your own CWR or TWRP by following THIS GUDE, Flash built CWR / TWRP into your device, follow THIS GUIDE
DOWNLOAD JB 4.1.2 ZA985 FOR MT6577 BASED DEVICE
MIRROR GOOGLE DRIVE
Flash via CWR / TWRP ... enjoy !!
ABOUT THE ROM
Jelly bean 4.1.2
Beautiful Emotion-UI with great Transitions
deodexed
This ROM Known safe to flash into:
Zyrex OneScribe ZA-985
KATA - i1
PLS CHECK FOR HUAWEI ASCEND U8836D / G 500
I have tested by FLASHING ROM FOR ZTE V970 from THIS THREAD to ZA-985 Zyrex OneScribe. with Default (in the rom) boot.img ZA 985 booting properly but facing random reboot. By Changing the boot.img with boot.img in above rom. Device booting properly, operable gsm, wifi, bluetooth, data connections ALL WORK but Camera NOT WORK[. ZTE V970 is more popular device than ZA 985, thus to port ZATE V970 rom to ZA 985 will be easier. I will do it once I have time NO ETA
Click to expand...
Click to collapse
Jelly Bean 4.1.1 for ZA 985 ported from ZTE V970
Jelly Bean 4.1.2 for ZA 985 ported from Acer liquid E-1

I've been using the ported ZTE V970 JB ROM to my Kata i1. It works fine except the front camera which is just on VGA (should be 1.3MP) and the temperature sensor which doesn't work. Those that are not working is not really a big deal. But if you guys can help me on making it work then it would be appreciated. Thanks!

verntechguy said:
I've been using the ported ZTE V970 JB ROM to my Kata i1. It works fine except the front camera which is just on VGA (should be 1.3MP) and the temperature sensor which doesn't work. Those that are not working is not really a big deal. But if you guys can help me on making it work then it would be appreciated. Thanks!
Click to expand...
Click to collapse
I think the rom is rooted. Please try to replace the file in /system/lib/hw/camera.default.so with one on your device with similar android version of ROM. If you don't have one ... try with ICS libs. Push via adb

Will try the camera tomorrow. How about the battery temperature sensor? What file do I need to get? Thanks!
Sent from my Kata i1 using Tapatalk 4 Beta

verntechguy said:
Will try the camera tomorrow. How about the battery temperature sensor? What file do I need to get? Thanks!
Sent from my Kata i1 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I'm not so sure, but I think there is /system/lib/hw/sensors.default.so ... this sensor AFAIK, is to control Soc Cemera . This probably also responsible for battery temperature sensor. in file also exist power.default.so we need to search info for their details jobs I have MTK6577 data sheet. I will take a look once I have time and come back

Both battery temperature doesn't work using ZA985 and V970 JB ROM on Kata i1. Tried copying the gps libraries from V970 to ZA985 but they use different modules. V970 uses mt6628 which is compatible with i1 while ZA985 uses mt6620. Using the i1 ICS libraries for camera and sensor won't work on the V970 ROM as it will be stuck on boot animation.
Sent from my Kata i1 using Tapatalk 4 Beta

verntechguy said:
Both battery temperature doesn't work using ZA985 and V970 JB ROM on Kata i1. Tried copying the gps libraries from V970 to ZA985 but they use different modules. V970 uses mt6628 which is compatible with i1 while ZA985 uses mt6620. Using the i1 ICS libraries for camera and sensor won't work on the V970 ROM as it will be stuck on boot animation.
Sent from my Kata i1 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Camera :I think u need /system/lib/libcamera.so and /system/lib/liboemcamera.so from original device, since this is proprietary and device specific.
ZA-985 itself Not available yet a custom rom. I was ported from Kata -i1...

If the JB ROM for ZA985 was ported from Kata i1, why is it that the front cam is only VGA wherein it should be 1.3mp and the battery temperature doesn't work. And as far as I know there's no official JB ROM for Kata i1 yet so that custom ROM is ported from another but not Kata i1.
Sent from my Kata i1 using Tapatalk 4 Beta

verntechguy said:
If the JB ROM for ZA985 was ported from Kata i1, why is it that the front cam is only VGA wherein it should be 1.3mp and the battery temperature doesn't work. And as far as I know there's no official JB ROM for Kata i1 yet so that custom ROM is ported from another but not Kata i1.
Sent from my Kata i1 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Kata - i1 has JB Custom ROM, I got from Piliphino Guys ...but I forgot the forums. Just search. if you can NOT find. I will upload for you. But it is NOT MY ROM ... someone named YON or something. Please drop message here. I will upload and let you know the links. After you downloading, I should delete I think. Unless the rom maker give permissions.

I believe those were ported ROMs but not official. There's no official JB ROM yet announced. I think it would be better if you message me the links instead of posting here. Thanks!
Sent from my Kata i1 using Tapatalk 4 Beta

I was able to download and flash the yonip custom rom for i1. However the gps works there but not on your ported rom to ZA985. Everything seems the same with the V970 ported rom but I feel the V970 is much smoother in terms of performance.
Sent from my Kata i1 using Tapatalk 4 Beta

I think u need to use library from your phone and flash via adb.
Sent from my Nexus 4 using XDA Premium 4 mobile app

This saves my cell phone. Thank you.

4.2.2 Roms

Hi
I'm a new be in android, and discover this forum when i'm searching roms for my phone
which is a clone of mmx A110 canvas 2.
all roms 4.0.4 and 4.1.1 and 4.1.2 of canvas 2 on this forum wok fine for my phone
but the newest ones 4.2.1 and 4.2.2 have a problems with them
the problem is in the camera, it did'nt work ( there's no driver message )
by a dev, i need to modify kernel ( private message )
first i'm a simple user, not dev ( how to modify the kernel with drivers for my phone cam ? )
second this issue with kernel appear only with 4.2
third i can't post in dev section i don't know why
finaly how to fix this problem
:crying::crying::crying:

zaabolla said:
Hi
I'm a new be in android, and discover this forum when i'm searching roms for my phone
which is a clone of mmx A110 canvas 2.
all roms 4.0.4 and 4.1.1 and 4.1.2 of canvas 2 on this forum wok fine for my phone
but the newest ones 4.2.1 and 4.2.2 have a problems with them
the problem is in the camera, it did'nt work ( there's no driver message )
by a dev, i need to modify kernel ( private message )
first i'm a simple user, not dev ( how to modify the kernel with drivers for my phone cam ? )
second this issue with kernel appear only with 4.2
third i can't post in dev section i don't know why
finaly how to fix this problem
:crying::crying::crying:
Click to expand...
Click to collapse
You won't be able to post into Development forums until you have 10 posts. This is to protect the Development forums from spam.

zaabolla said:
Hi
I'm a new be in android, and discover this forum when i'm searching roms for my phone
which is a clone of mmx A110 canvas 2.
all roms 4.0.4 and 4.1.1 and 4.1.2 of canvas 2 on this forum wok fine for my phone
but the newest ones 4.2.1 and 4.2.2 have a problems with them
the problem is in the camera, it did'nt work ( there's no driver message )
by a dev, i need to modify kernel ( private message )
first i'm a simple user, not dev ( how to modify the kernel with drivers for my phone cam ? )
second this issue with kernel appear only with 4.2
third i can't post in dev section i don't know why
finaly how to fix this problem
:crying::crying::crying:
Click to expand...
Click to collapse
Strange....Camera is working perfect after release of custom kernel of @Andrixu...Do u have old MMX FON or the Latest one...as latest MMX A110 is not supporting camera on 4.2.2..although our devs r contionuosly working to fix it asap..in case if u hv old MMX than try to.reflash the latest kernel of @Andrixu (which u can find in ANDROID ORIGINAL DEVELOPMENT FORUM) then ur both the cameras will work perfectly..
HIT THANKS IF I HAVE HELPED U
Sent from my JMP V13 using xda app-developers app

vaibhavnriitm said:
Strange....Camera is working perfect after release of custom kernel of @Andrixu...Do u have old MMX FON or the Latest one...as latest MMX A110 is not supporting camera on 4.2.2..although our devs r contionuosly working to fix it asap..in case if u hv old MMX than try to.reflash the latest kernel of @Andrixu (which u can find in ANDROID ORIGINAL DEVELOPMENT FORUM) then ur both the cameras will work perfectly..
HIT THANKS IF I HAVE HELPED U
Sent from my JMP V13 using xda app-developers app
Click to expand...
Click to collapse
here is my phone : http://www.evertek.com.tn/index.php/EverShine#!aboutus
( EverShine ) it's a clone of mmx a110
and i have tested the two boot.img, of Andiroxu and varun, and the same problem remain
i think when modded, this news boot.img contain only driver for mmx a110, not an universal drivers for other clones
which is not the case with the boot.img of the "4.1.x" version

am i the only one facing fc while opening face and voice unlock on legoice canvas 4 r
sir i am facing fc on face and voice unlock sir....
plz try to fix it......

zaabolla said:
here is my phone : http://www.evertek.com.tn/index.php/EverShine#!aboutus
( EverShine ) it's a clone of mmx a110
and i have tested the two boot.img, of Andiroxu and varun, and the same problem remain
i think when modded, this news boot.img contain only driver for mmx a110, not an universal drivers for other clones
which is not the case with the boot.img of the "4.1.x" version
Click to expand...
Click to collapse
EverShine would have taken Latest Devices.... Where is the logo of your brand on the Phone??[just asking] as on india....only old phones which came with ICS out of Box is supported by New Kernels... Did you try old kernel by andriroxu??

Dark4Droid said:
EverShine would have taken Latest Devices.... Where is the logo of your brand on the Phone??[just asking] as on india....only old phones which came with ICS out of Box is supported by New Kernels... Did you try old kernel by andriroxu??
Click to expand...
Click to collapse
Thanks for your replay
here the logo:https://copy.com/8oDg7DVLpR0D
and here the original rom 4.0.4: https://copy.com/1O8pHW2DQWmV
old kernel by andriroxu, ported for 4.2, yes i tried it,Varun's one too
same, cam not work
i have flashed roms from wiko king, cynus T2, my phone a919 and mmx of course (4.1.x), and all kernels are compatible for EverShine

sorry i forget this:
i have tried this one too:http://rghost.net/48929665
DeGRuS Fix
Features:
# Fix auto focus camera 100%
# Added French language pack
# Added MTK6577_governor on Settings
it' a fix for Wiko King, and problem of cam remain, wifi stop working too by this fix
(for information)
thanks for your attention again

hey post some pics and use android analyzer to find what r the actual specs of ur fone

Recognized Noob said:
hey post some pics and use android analyzer to find what r the actual specs of ur fone
Click to expand...
Click to collapse
For screens, i'm not on original rom, i've flashed " Suvi_ROM_TITAN_v15 "
attached log of analyzer, i don't understand any thing :silly:

[Completed] How to get my stock rom back on micromax canvas a114?

I have recently tried to install cynogenmod on my phone and it was sucessfull but i am not satisfied and want to get my stock rom back.
Model - canvas 2.2
Android - 4.2.2(Jelly Bean)
Ram - 2gb
processor - 1.3 ghz

XDA Visitor said:
I have recently tried to install cynogenmod on my phone and it was sucessfull but i am not satisfied and want to get my stock rom back.
Model - canvas 2.2
Android - 4.2.2(Jelly Bean)
Ram - 2gb
processor - 1.3 ghz
Click to expand...
Click to collapse
Hi, thanks for using XDA assist!
First, please create an account so you can post in other forums.
Here is a thread regarding your question:
http://forum.xda-developers.com/showthread.php?t=2631365
Also, you can ask for help here:
http://forum.xda-developers.com/showthread.php?t=2259645
Good luck!

After installing the custom rom my phone's keyboard is not working
so can custom rom be removed from the recovery mode?
Please mention the steps.

dewalparakh444 said:
After installing the custom rom my phone's keyboard is not working
so can custom rom be removed from the recovery mode?
Please mention the steps.
Click to expand...
Click to collapse
Thanks for responding.
Please ask your question in the second link that I provided.
Also, I would recommend a factory reset after installation of your factory firmware.