Database Info

[Q] Screen "randomly" turns off when outgoing call and stays turned off

Hi there.
I am experiencing some unexplained behaviour of my phone. When I call someone (outgoing call) the screen sometimes goes immediately off and I can't seem to wake it up. No matter what button I press (home, volume, search, power, down...) only back light of the buttons lights When this happens (not all the time) I have two options: either I take the battery out or I use another phone and call my number and phone screen wakes up.
I've noticed that this started after I've installed Sipdroid At least so I thought. So I've removed Sipdorid but behavior is the same. Untill that point I was using mik_os I went to #cyanogenmod and they suggested me to install a new ROM. If i still had the problem I should ask here on xda forums. So I've installed official cyanogenmod - stable rom (CM 7) with latest gapps. After installation I had to flash old baseband version since I under about phone there was no Broadband info and I had no service. After installation of baseband version I was able to get service but I'm still confronting problems when outgoing calls sometimes.
Video of outgoing call and screen turning off.
Do you need me to post complete logcat after screen turns off?

Enable option 'always use proximity' in Call settings
Sent from my Ainovo Flame (Nexus 7) using Tapatalk 2

myawan$ Enable option 'always use proximity' in Call settings
Thank you for your suggestion.
I did enable it but it didn't help. Note that when I call someone screen is completely off and when call is going and I try to press some buttons no back light is present.

i had a kind of similar problem..not after call but when i used to lock my device and then press any button, screen was like not coming seemed like it didn't waked but soon i realized it was brightness problem kind of when i set brightness more than dim i had no problem..

Use a custom kernel not based on the cm kernel
Eg. ta-kernel 1.1 (my personal favourite)
I also have this bug in all cm based kernels.
Sent from my LG-P500 using xda app-developers app

Free.rockstar$ i had a kind of similar problem..not after call but when i used to lock my device and then press any button, screen was like not coming seemed like it didn't waked but soon i realized it was brightness problem kind of when i set brightness more than dim i had no problem..
Yeah this is not the same problem I guess. I used highest brightness and problem is still there.
akashgupta222$ Use a custom kernel not based on the cm kernel Eg. ta-kernel 1.1 (my personal favourite) I also have this bug in all cm based kernels.
I will try your suggestion. But just to make it sure I recorded the video so you guys can see what I'm exactly talking about. Also isn't this odd that when using mik_os kernel (I don't if it is even CM based or not) this started to be a problem after one year? Is it possible that my microSD card is corrupt, that I should repartition it or anything like this?
Video
Thank you Free.rockstar and akashgupta222 for your suggestions.
EDIT: I partitioned SD card (2GB capacity): 512 MB ext, 0 MB swap problem is still there. I'm going to install ta-kernel 1.1 as akashgupta222 suggested and see what happens.

akashgupta222$ Eg. ta-kernel 1.1 (my personal favourite)
I feel so newbiesh atm. I've installed Gingersnap 2.3 rom because I saw Candied-kernel v2.5.6 ta vsync xz
But then I went to read about Candied kernel and I saw that it is based upon cyanogenmod kernel :|
akashgupta222, can you please provide me link to the ta kernel? Or any kernels that has worked for you and you didn't get black screen? Also can you provide me the rom that you used with tose kernels?
I'd be much grateful if you do so.
==================
====== UPDATE ====
==================
So I've been trying different .35 kernels from this list:
- franco.Kernel for Gingerbread (downloaded franco.Kernel-4.zip) I didn't find any other version then #4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-hachtunganh's CAF Kernel (downloaded signed_ta-kernel.zip) signed_ta-gb-1.1.zip seemed broken link Still trying to find ta-kernel 1.1
None of those kernels saved my incoming/outgoing calls sadly. On the side note, notice different version of Broadband? Why does it change with different kernel?

http://www.mediafire.com/?22y45z15xr2jv
Here you can find all ta kernals
Sent from my LG-P500 using xda app-developers app

akashgupta$ http://www.mediafire.com/?22y45z15xr2jv Here you can find all ta kernals
akashgupta222, did you saw my video (youtube link?) I've tried signed_ta-kernel.zip (previous post) and the result is the same. Also signed_ta-gb-1.1.zip link is broken (I belive you suggested me that specific kernel?) Do you have that zip anywhere around on your computer, sdcard maybe, if so please upload it for me somwhere.

http://db.tt/19oGqnfj
Here it is, i couldn't watch the video because it did not play on my mobile, it gave some permission error
Edit : rechecked the video link, it shows that the video is private.
Sent from my LG-P500 using xda app-developers app

akashgupta222$ Here it is, i couldn't watch the video because it did not play on my mobile, it gave some permission error Edit : rechecked the video link, it shows that the video is private.
akashgupta222, sorry for that I've fixed it. WORKING VIDEO Now you can watch it :/ Thank you for your link. I'll try it now. If it doesn't work I belive I'm forced to install stock firmware from LG.
EDIT: Unforuntally even this kernel won't fix black screen :/ I guess I should start reading on how to install stock firmware for LG optimus one P500 and take my phone to a service since it's still under warranty.

[APP]KitKat ScreenRecorder (Now supports stopping and more)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Info:
New ScreenRecorder in town! This one performs perfectly on Android 4.4 KitKat. It uses the native "screenrecord" binary from 4.4 ROM which give very smooth results. (All ScreenRecords that are not using the "screenrecord" binary will not work on Android 4.4 KitKat). Ugly Icon will be replaced soon (first name was KitKat ScreenCast thats why the icon says 'KKSC', Icon and market name will be changed soon)
<-- BEFORE USING THE APP, PLEASE READ THE TEXT BELOW!!!!! -->
Note: While recording your device may become a bit laggy, Recorded video (when played on PC) is 100% smooth
Steps:
1. Fill in the path of the destination file. this may not include symlinks, a hard links to your sdcard is automatically placed in the first input field.
2. Choose a bitrate, the default given bitrate is 4000000, which is 4Mbit. Higher bitrate means better quality. I prefer 8-12Mbit.
3. Press "Start Recording" to start recording the video, the app will now minimize, when you are done with your recording press the notification that popped up. this will stop the recording.
Screenshots
Market Link
https://play.google.com/store/apps/details?id=com.broodplank.kitkatscreenrecorder
Changelog:
v1.2
- Add icon (forgot in last release)
v1.1
- Removed RootTools (not needed and causing issues)
- When recording the app now will automatically minimize itself.
- Added Stop Button
- Removed duration
- Added Notification for recording, when pressing this notification the recording will stop.
v1.0 Initial Release
If something doesn't work instead of rating 1 star please post it here so I can help fix it.
Sometimes you need to choose odd destinations such as /cache or /data to make it work.
for example I recorded to /data/filename.mp4 in this video:
www.broodplank.net/files/filename.mp4 you can see how smooth it is! kitkat power

It works only for KitKat sir? Then it'd be of no use for us S4 users!

jujuburi said:
It works only for KitKat sir? Then it'd be of no use for us S4 users!
Click to expand...
Click to collapse
lol think again http://forum.xda-developers.com/showthread.php?t=2397511

broodplank1337 said:
Today I've made a set-up for a screenrecording app, it only supports android kitkat, since it uses the "recordscreen" binary.
Very early release, but works pretty neat, afaik this is the only screenrecorder atm that works on kitkat. (i have tested 3 others and they didn't work)
:
Click to expand...
Click to collapse
SCR Screen Recorder Free works on 4.4?
Here's the screencast using Omni rom
http://www.youtube.com/watch?v=-SlEDLfq41s

Garner said:
SCR Screen Recorder Free works on 4.4?
Here's the screencast using Omni rom
http://www.youtube.com/watch?v=-SlEDLfq41s
Click to expand...
Click to collapse
oh it worked for you?
for me it kept telling me some fake message about me having no root. which is obviously not the case.
screencast resulted in black videos, not more, other screenrecord apps crashed.
but i did some searching on "kitkat screenrecorder" and it seems there are already like 3/4 apps that are almost the same as mine (but were posted earlier), all screenrecorders using "recordscreen" binary work on kitkat, all others dont work guaranteed.

broodplank1337 said:
lol think again http://forum.xda-developers.com/showthread.php?t=2397511
Click to expand...
Click to collapse
So I have to install that ROM to get this working?
Sent from my GT-I9500 using Tapatalk

jujuburi said:
So I have to install that ROM to get this working?
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
No just a any rom based on kitkat 4.4, but i dont know if i9500 already has kitkat.
update news: I just found how to stop the recording without killing it, so today a new version with a start and stop button, and removed duration

Update to v1.2.
App dramatically increased, now user friendly, no duration set etc.
Please check it out

Curious as to how you modified the binary to allow longer recording...
Is it a case of hex editing the binary and patching out the 180s restriction (i.e. changing it to a higher value)?
I have no idea how to edit compiled binaries and would be interested in learning a few tricks!

Psych0Chimp said:
Curious as to how you modified the binary to allow longer recording...
Is it a case of hex editing the binary and patching out the 180s restriction (i.e. changing it to a higher value)?
I have no idea how to edit compiled binaries and would be interested in learning a few tricks!
Click to expand...
Click to collapse
Here: http://forum.xda-developers.com/showpost.php?p=47749809&postcount=2137
Side by side comparision http://review.cyanogenmod.org/#/c/54438/2/cmds/screenrecord/screenrecord.cpp

danny_and_2 said:
Here: http://forum.xda-developers.com/showpost.php?p=47749809&postcount=2137
Side by side comparision http://review.cyanogenmod.org/#/c/54438/2/cmds/screenrecord/screenrecord.cpp
Click to expand...
Click to collapse
Ah, built from source. Fair enough.
Thanks!

danny_and_2 said:
Here: http://forum.xda-developers.com/showpost.php?p=47749809&postcount=2137
Side by side comparision http://review.cyanogenmod.org/#/c/54438/2/cmds/screenrecord/screenrecord.cpp
Click to expand...
Click to collapse
Thanks for posting ^^. when doing it from source its really a minor change, when doing it with a hex editor it can be harder, but still very easy.
I recently hexed out a message that was spamming "mCompEngine is NULL" out of camera.msm8960.so, without any issues, just fill the actual spot with zeros and its done

Hi broodplank,
The screen recording itself works great but I'm having a couple of issues.
I backed up the current binaries and then installed the hacked binaries but I'm still unable to record for longer than 3 minutes. Also, clicking on the notification to stop the recording simply brings me back into the app. I have to actually manually click on the Stop Recording button inside the app.
I'm using the latest version (v1.5) and have a HTC One, if that makes any difference.
Great to see that sound recording will hopefully be available soon as well

help i need to record video calls from whatsapp internal and external audio
My device is Samsung and I am a root user, I have magisk installed, I already tried the screencam and nothing does not work, src pro and neither. I am android 10. Help please

[APP][2.3+] Headphones Equalizer & calibration tool | Custom audio experience (1.1.5)

[APP][2.3+] Headphones Equalizer & calibration tool | Custom audio experience (1.1.5)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello,
I love listening to music, especially on the go. Many modern devices offers a more than adequate audio experience, but sometimes I wished I could had more. Therefore, after some research, I've decided to realize Headphones Equalizer, a tool for enhancing the audio output on Android (devices with 3.0 and up).
The concept is simple: record your headphones profile, by measuring the intensity of sound at fixed frequency bands, stash it and adapt default and custom equalizations to it.
Here is the list of main features:
Headphone stash: add as many you want!
Headphone calibration: measure frequencies sound intensity to adjust the equalization
Headphone profile equalization: set a base equalization to adapt the sound experience
Headphone correction: switch this feature to automatically apply the profile equalization
Bass boost and Correction attenuation: use the knobs to achieve the perfect sound for your ears
Autogenre: retrieve current song genre and switch equalization according to it
Integrated music player and system volume controls: manage the system volume and the default music player without leaving the app
Quick notification access: use the notification to quickly change the current equalization or access the app
Android Wear support: control Headphones Equalizer directly with by wrist with full support for LG G Watch, Samung Gear Live and future smartwatches
Custom equalizations: add your equalization to the headphone list
Backup and restore your headphone stash
The project beta is over, thanks to everyone who tested the app and helped with the debug!
You can now simply download the app on the Play Store Page. Soon I'll post an apk in this post.
Some features require an in-app purchase (please refer to the Play Store page).
Feedback and requests are more than welcome, thanks!
Changelog:
v1.1.3:
Better knob handling
Various fixes​
v1.1b
You can now disable the equalizer (long press the switch)
Spectrum analyzer during calibration
New calibration algorithm (please update your headphones profiles)
Performance fixes
UI improvements
v1.0.5b
Added support for Android 2.3
GUI optimizations for smaller screens
New notification icon
Various bugfixes
v1.0.4b
Compability check fix
v1.0.3b
Various fixes
Added compability check
v1.0.2b:
First public release
Google+ community | Play Store page​

Hello
You link for google+ no working
You post link for playstore and other store please
Sorry for ma bad language
By Winny

winny57 said:
Hello
You link for google+ no working
You post link for playstore and other store please
Sorry for ma bad language
By Winny
Click to expand...
Click to collapse
Hi,
Thanks for your interest. Unluckily, as I am a new user, I cannot post URLs; anyway, the Google+ community link (at the bottom) should work. If instead you refer to the Play Store link in the Google+ community page, to open it, you first need to join the community itself. Let me know if it worked.

Sounds very interesting and i give it shot and send my report later.thanx
GREETZ FROM TEAM-OPTIMA!!!

Some Android Wear screenshots (from real device). Sorry can't update first post!

winny57 said:
Hello
You link for google+ no working
You post link for playstore and other store please
Sorry for ma bad language
By Winny
Click to expand...
Click to collapse
Hi Winny,
Did it worked at last?

No link for the play store download The Google+ link is working now though

I had a bug report in which a user couldn't save new headphones. Did someone notice this behavior?

Yup,ive same issue on LG Optimus L5 E610 with Carbon 4.4.4 rom.
GREETZ FROM TEAM-OPTIMA!!!

-CALIBAN666- said:
Yup,ive same issue on LG Optimus L5 E610 with Carbon 4.4.4 rom.
GREETZ FROM TEAM-OPTIMA!!!
Click to expand...
Click to collapse
Did your device crashed after attempting to save? Would you mind sending me an email (you can find it on the community page) so I can send a new version?
Thanks

I've just uploaded an update to the Play Store, should be available anytime from now. The problem in saving new headphones may still occurs but now you can feedback me about it by sending a file.

-CALIBAN666- said:
Yup,ive same issue on LG Optimus L5 E610 with Carbon 4.4.4 rom.
GREETZ FROM TEAM-OPTIMA!!!
Click to expand...
Click to collapse
Has the update fixed the issue?

Another update to fix compatibility check. Thanks for the reports!

Hello XDA, I've uploaded v1.0.5b to the Play Store so it should be available soon to all beta testers! For the changelog and instructions on how to join the beta please refer to the first post.
Thanks

manythingsdev said:
Has the update fixed the issue?
Click to expand...
Click to collapse
Still looking forward for headphones save issue reports, thanks!

New update sent to the Play Store! The calibration algorithm has been changed, so please redo your headphones profiles.

Another small update to fix last version issues.

New version will be soon available on the Play Store. Unless any major issue, this could be the first final release, ending the beta testing. Please continue sending feedback, thanks!

App is now out of beta and available on the Play Store page!

Hello
I love this app! Thanks a lot. But I have a little problem: when using deezer, the autogenre worked well. But since I go to spotify, it work no more. I can't skip the track either. It's quitze ennoying because i love tu use this app. Can someone telle me what is happening?

[Q&A] [ROM][P900][UNOFFICIAL] Cyanogenmod 11

Q&A for [ROM][P900][UNOFFICIAL] Cyanogenmod 11
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

GPS functionality
The 20141014 build seems to have issues resolving GPS signals versus 20141010 and prior.
I can only "lock" signal under clear skies and no cover with the new build.
Prior builds, rooted TouchScreen builds and the "stock" builds have no issues finding /locking GPS under cover (within reason anyhow, effective Faraday buildings notwithstanding), e.g. while sitting at my desk.
Even as little shelter as my car provides "blocks" signal for the 20141014 build, but not for the others as mentioned above.
Hopefully this can be fixed in the next release along with the vibration bug.

No issues whatsoever with GPS lock on 10/14 build. This is from the bottom floor of a three story brick condo. Agreed that vibe not working though.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hello guys! Thanks u so much for the ROM is AWESOME
But i have a problem, with samsung stock based roms, when i use S-pen, the physical buttons dont works, so if i hold accidentaly recents or back button while im writing the buttons dont works, What can i do to disable while im writing like in samsung stock? It is possible? Its importante for me becausei use this tablet for taking notes at university
Thanks 4 all guys

Can anyone help me with the Sleep of dead :/?

Aurondios said:
Can anyone help me with the Sleep of dead :/?
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B-6nm7Jks0W5NHktYUROOTVSNFU/view?usp=sharing
use this firmware ar temporary fix of sod

With all this great work, providing CM11 on the P900; does that mean we may one day see CM12 for this machine? i.e. will the P900 become a fully supported member of the CM family?

First off thanks for the much needed custom rom! I am very greatfull!
Here are some issues i am having
1 . printing to myhp printer doesnt work properly on cm i tried installing hp app but it dosnt find the printer a lot of the time, and on stock it wrked flawlessly, also on stock when i printed a photo from galary i had both hp print option and a red samsung logo print option that had more capabilities such as greyscale and resizing , now there is no samsung option ,i reallyvlikevthat samsung printing so i tried installing samsung print from playstore but it doesnt connect to the hp printer and its not what was on stock cause there is no red logo option when i print from galary.
2. How do i extract snote from stock nandroid backup to install on cm i tried com.snote blah blah and it didnt work if someone could point me to the apk that would be great
3. Cifs/samba kernal support for mounting windows shares to the local filesystem, Could someone release a kernal supporting cifs or a kernal module i feel it is appropriate function for this tablet , was surprised samsung had not included it for thier " productivity tablet"

Camera is not working on my device (P900).
"Cant connect to camera" or something.
Otherwise runs fine.

Will this work on the 907 AT&T version?

Drew489 said:
Will this work on the 907 AT&T version?
Click to expand...
Click to collapse
No. P900 only, must have Exynos CPU.

Newest CM11 Build
Had the latest build and am experiencing no camera functionality and longer boot times. But, the ROM is otherwise stable and smoother than Touch Wiz.
This is on the P900 also.

whats about the battery life?
And could anyone post a antutu score?
thank ya

I am loving my note pro like never before. Thanks to all who have worked on this.
Question: I am only able to connect to my 2.4 ghz part of my router not the 5G speed. I have installed the extra kernel with VT. Should I flash original kernel?

ROM "Flavors"...
I have to agree with bonuzz's "Option #2" - less frequent updates (barring bugfixes), stable versions, maintain good battery life.
If you decide to support only one or two flavors of AOSP ROM, I'd vote for CM, followed by Omni.
While custom kernels are always great - as long as I can set the included kernel to "ondemand", I'm a pretty happy camper.
Thanks!

Hi everybody
Now that my SM-P900 works again (the touchscreen functionality was broken) I would love to be able to play some SNES/N64 ROMs on that huge tablet.
Unfortunately I had to realize that my XBOX 360 Controllers doesn't work with this CM11 version.. after asking Google I found out that it may be caused by the not loaded xpad.ko kernel module.
Is there a way to load it manually? Or do I have to recompile the ROM with the module enabled? If yes, how to do this?
http://www.reddit.com/r/cyanogenmod/comments/2ehlbv/galaxy_s4_cm11_game_pad_support/

Volans21 said:
Hi everybody
Now that my SM-P900 works again (the touchscreen functionality was broken) I would love to be able to play some SNES/N64 ROMs on that huge tablet.
Unfortunately I had to realize that my XBOX 360 Controllers doesn't work with this CM11 version.. after asking Google I found out that it may be caused by the not loaded xpad.ko kernel module.
Is there a way to load it manually? Or do I have to recompile the ROM with the module enabled? If yes, how to do this?
http://www.reddit.com/r/cyanogenmod/comments/2ehlbv/galaxy_s4_cm11_game_pad_support/
Click to expand...
Click to collapse
ask Valera to turn on xpad module in kernel on next release.

Nando14sunny said:
whats about the battery life?
And could anyone post a antutu score?
thank ya
Click to expand...
Click to collapse
Battery life is about 6-hr SOT, mixed lighting
I don't believe in benchmarks when comparing ROMs

Increase Volume?
Is there any way to increase the volume? The sounds, media, ringtones, etc sound really low even when they are at the maximum level.

Missing Options From Menu
So far loving this rom. However, I can't find the "Stylus Gestures" or "Show icon when using stylus" under the Language and input category. When I search the menu they are list as results, but they are not actually in the menu. Am I missing something?

[APP][8.0+] Skip track by Volume keys

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A systemless and standalone application which let's you skip tracks on your Android 8.0+ device by long pressing the volume keys.
Working on every 8.0+ ROM, including stock AOSP without root. Tested on 8, 9 and Q Beta!​
Installation
Download the newest release from the link below and install it on your device as usual.
Connect your device to a computer and enable developer settings and fire up
adb shell pm grant com.cilenco.skiptrack android.permission.SET_VOLUME_KEY_LONG_PRESS_LISTENER​
On startup the app will check if has the permission. If you don't see any message the process worked and you are ready to go.
If the app is installed as system application by flashing it through a recovery this step is not needed as the permission is granted automatically.
Contribution
Please feel free to send me issues and pull requests for improvements, stability and new feature ideas.
If you want to help translate the app you can do so here.
Review (thanks to @pankspoo)
https://www.youtube.com/watch?v=4lfh5SGhkiU&feature=youtu.be
Support me
Download
Sourcecode
Apk (1.0.0)

Will this work on (stock) Samsung devices with OneUI (Android 9.0)?? I have a Galaxy S10+ (Sprint).

JoeFCaputo113 said:
Will this work on (stock) Samsung devices with OneUI (Android 9.0)?? I have a Galaxy S10+ (Sprint).
Click to expand...
Click to collapse
I'm sorry that I can not test it on that phone directly but I don't see any reason why it shouldn't work.

Note8 One Ui error installing

hackercelik said:
Note8 One Ui error installing
Click to expand...
Click to collapse
It's the same on LineageOS 16

@GustavoWiesner, @hackercelik So sorry for that guys!
I accidentally uploaded an unsigned apk. Please try the new one from the same link

@GustavoWiesner, @hackercelik So sorry for that guys!
I accidentally uploaded an unsigned apk. Please try the new one from the same link

Xperia XZ1, Stock 9.0 rom, i have no logs but app starts without error. All buttons are working. But it doesn't skip tracks on long colume button press on/offscreen.. when it is offscreen it doesn't change volume if this will help..(did all the instructions)

Samsung Galaxy S10+, app starts nor error, adb command all good too, but the skip function doesn't work.

Had a bug in it sorry for that! Also the signing should be fixed now.
So sorry for that. Please try the new version (same link)
Reinstall and may also try to rerun adb command!

It works as advertised now! Thank you!

Does this work when the screen is off?
Also, this is the first app I've seen that uses this API since we covered its existence nearly two years ago: https://www.xda-developers.com/android-oreo-volume-key-long-press/
edit: just read the GitHub readme, it does say it works when screen is off..will have to test.

MishaalRahman said:
Does this work when the screen is off?
Also, this is the first app I've seen that uses this API since we covered its existence nearly two years ago: https://www.xda-developers.com/android-oreo-volume-key-long-press/
edit: just read the GitHub readme, it does say it works when screen is off..will have to test.
Click to expand...
Click to collapse
Yeah it works with screen of as well!
Actually that post gave me the idea to create this app

I confirm it works now! Xperia XZ1 on Android 9 stock. Working like a charm. This is the only real standalone solution for skipping tracks with volume buttoms while screen is off on android 8-9. Great work dev ???

This is awesome! It works with every app I tried... except for Poweramp, which is my player of choice. This must be something on Poweramp's end though, since every other apps works as intended. What's weird is that Poweramp's beep seem to indicate that it's catching the next/previous commands, but won't skip tracks. Is there any specific configuration I should set on Poweramp for it to work?

does it work for Spotify?

I didn't even know there was an API for this but I'm so glad for this app, works perfectly on stock rooted OOS 9.0.4, thank you for this app!!! Took a little fiddling but it worked after a few minutes

I am so glad someone created this. I have been waiting for a standalone version of something like this since Xposed mods are a thing. This is awesome. Thank you so much!

very nice, thanks for sharing this app?

On an s10+ here, skip track works but volume will increase as if the button was being held. Ie. Once skipping to the next song, it will play at a much louder volume. Tested on Google play music and spotify.
UPDATE: disregard this, issue seemed to have fixed itself