Related
I am looking for guidance this time.....I have a Nexus s I9020 (t mobile version) and a couple weeks ago I don't know what happened really but i may have been messing around with a newer version of clockwork recovery late one night .... then the phone wouldn't boot past the google screen and I couldn't do anything to fix it... I tried to figure things out the next day and this is a list of things i have figured out...
1. in clockwork it can't mount anything....like anything at all pertaining to the internal memory/storage
2. I was tired and irresponsible
3. I tried fastboot just about everything
4. I tried flashing newer/older versions of clock work......nothing worked
5. I have tried downloading and installing roms via adb and fastboot but an error message comes up...
6. now this I know is dumb on my part, but make fun of me as you will... I fastboot locked the device......I know it was stupid because now when I type in fastboot oem unlock it hangs and does nothing after I check unlock on the phone...
I can get into fastboot mode and it says no boot or recovery img?
now if I had access to the internal memory I would def. be able to go back to stock but there in lies the problem what on earth can i do to make this thing a paper weight?
this is what i'm talking about, the bootloader doesn't unlock it just hangs .... any thoughts?
"w w w.youtube.com/watch?v=C4cS0kMj4AI"
First of all I apologize if this has been covered, I have been trying to find a solution for 3 days straight. I have a Rogers Wireless HTC One X I managed to unlock bootloader and root as well as having access to TWRP 2.1.8. recovery.
My problem is when I tried to apply the 3 dot removal mod my phone suddenly would not boot past the first screen, and a message would appear for developers use do not distribute but just stay on that screen. I have tried numerous things to no avail. I can boot in recovery and mount sd card from there (but have not found a successful way to restore from within recovery mode) otherwise in fastboot etc. the computer does mount the phone at all. it will not mount as a device properly so I cannot run the RUU and flash to stock.
So I am left with a unmountable and unbootable phone (brick) and have no other ideas on how to fix it if possible. BTW the device does show in device mgr and the computer gives the connect and disconnect alert, but it will not mount. Also, I have read the bootloader has to be relocked to flash back to stock if I relock the phone I cannot access recovery therefore an endless nightmare. Also, within TWRP recovery I try to reboot and it gives an error saying no Android OS found, install a rom or restore from backup (which I have neither) so I have to hold the power and dwn volume button to reboot each time to switch from recovery to fastboot. I think its toast.
Thank you in advance for any responses, I have been up almost 36 hours straight trying to figure this out and the phone is not even a week old. :crying:
There's a link in dev to unofficial twrp with usb mount support install that by following the directions in the thread. Then you'll be able to copy a rom to the phone for flashing.
Or you can install HTC Sync on your computer and that may allow you to use a RUU to flash back to stock. HTC Sync has the required drivers to make a Windows PC recognize the HOX.
gunnyman said:
There's a link in dev to unofficial twrp with usb mount support install that by following the directions in the thread. Then you'll be able to copy a rom to the phone for flashing.
Click to expand...
Click to collapse
Thank you very much I will look into that today. Fingers crossed!
i ran into a similar situation about a week ago. hard shut down the phone by holding down power button for like 10 seconds, then boot into bootloader. hit fastboot. connect your phone to computer, and fastboot oem lock bootloader. now you can ruu. Download Rogers RUU utility and follow steps. Voila! Phone is just like new! but first make sure you still have your old unlock_bin code in case you want to reunlock bootloader.
stnguyen09 said:
Or you can install HTC Sync on your computer and that may allow you to use a RUU to flash back to stock. HTC Sync has the required drivers to make a Windows PC recognize the HOX.
Click to expand...
Click to collapse
Yes, thank you I have HTC Sync installed and it does not recognize the phone when it is connected either. I will keep searching. Thanks.
ethantarheels123 said:
i ran into a similar situation about a week ago. hard shut down the phone by holding down power button for like 10 seconds, then boot into bootloader. hit fastboot. connect your phone to computer, and fastboot oem lock bootloader. now you can ruu. Download Rogers RUU utility and follow steps. Voila! Phone is just like new! but first make sure you still have your old unlock_bin code in case you want to reunlock bootloader.
Click to expand...
Click to collapse
Yes, I have tried relocking bootloader, it did not help with the phone being recognized by the computer also when I oem lock I cannot access recovery and such. I will have some more time to poke around with it, I have downloaded the RUU utility although it sends back error with device not found. Thanks for your reply, I will keep at it I know the phone can not be bricked, well I am hoping not!
Hello, so it looks like i screwed up here and got ripped of on ebay. I bought a nexus i9020t for a friend at work to bring back to india.
The seller said it had a rom install badly on it, but it could still get into the bootloader. He claimed with some effort it was likely fixable..which me and 33 other bidders agreed (*dumb move*)
Unfortunately with some further research I think this phone is having the eemc problem where it can't read its internal memory. It is stuck on the google boot screen, but bootload is accessible. When i go to look in the sdcard from recovery, it can't mount it.
"Fastboot oem unlock" won't work and from what i read, its because its trying to wipe the internal memory..but it can't access it, it freezes and when i boot back into bootloader its still locked. Also the phone boots into android every once in a blue moon, like after 20 battery pulls it will boot into 2.3.4. I've tried Wugs tool to try unlock to no avail, driver setup checks out according to the UI.
I need to unlock the bootloader to do anything, i even need to unlock bootloader to put on clockwork mod. Anyone know of a .zip package that will install clockworkmod, so i don't have to do "fastboot flash recovery recovery-clockwork-5.0.2.0-crespo.img" because that requires unlock.
Also i'm having trouble seeing the point to all this because even if I get the bootloader unlocked thats not going to help a hardward problem.
The fact it boots into 2.3.4 on ocassion indicates to me that its freezing at boot because the internal memory..i mean if there was no rom on there it would never load jack.
So other than my clockworkmod .zip install question, anyone know if the internal sd card can be replaced? I mean ill go in there if its an actual sd card and not attached to the board or something. Need some guidence here, I see the problem around, but is there reall a solution so this?
Have you tried flashing with odin ? Mabey tick the repartition option.
Sent from my Nexus S using xda app-developers app
Yea I will do that this afternoon, also I will try using the PA drivers and Wugs tool on another machine.
I'm not sure but you could try to root the phone with the gingerbreak exploit over an adb shell. After doing this you could install ROM manager and flash cwm. The ROM manager app doesn't need an unlocked boot loader. It just needs root permissions.
After doing this you should be able to boot into cwm.. BUT I don't how it could help you with your hardware problems.
Sent from my Nexus S using xda premium
I'd get a refund. If it boots once in a blue moon, something isn't right hardware wise. It either boots or never boots, not "when it feels like it".
Yea idk i hoped the guy had just super effed up the software.
Now where i'm at is i got the bootloader unlocked using the fastboot command, i had to try serveral times, but it worked eventually.
Now i need to load something or do something that will alow me to repartition system.
Basically once bootloader was unlocked i used wugs tool to "flash stock + unroot" from "can't boot" status. It worked on recovery, bootloader ect..alle the way up until it tried to write the system, and gave an error "write failed (unable to remote write)" or something like that.
So now i'm basically tyring to get the "sabra root toolkit.zip" on the device so that i can use clockwork to partion the /system. Or some other way of partiioning /system.
But i'm having difficulty pushing files to the device because wugs tool is expecting you to be booted with usb developing on, and i can't boot.
I've tried "pushing files", and "installing .zip packages from my machine" under wugs tool, and it fails every time because adb device not found, and i think its because i'm not fully booted.
Still recommending a refund. This isn't easy to fix, it's actually not fixable by commoners.
Okiedoke here's the update, I got this puppy working. Just as I did with the "fastboot eom unlock" command, I just kept trying the wugfresh "flash stock + unroot" with the "can't boot" option checked. Several times it failed when trying to write to /system, eventually I tried and it worked. Now I havnt had a boot go bad since the fix (knock on wood) and its running jelly bean.
As for the troubles couple things I noticed
1. I don't think ABD works unless you're fully booted and you have USB debugging on.
As a result not much of wugfresh's options work, only the fastboot ones do.
So the "can't boot" option only uses fastboot so it works while in bootloader.
While the unlock option won't work, because it's trying to use ABD in the beginning.
In fact the only option that doesn't use ABD that I can think of is the cant boot.
So if youre locked like I was, you need to use the command line.
2. I think the problem was the rom the guy had on before had a full blown bad flash.
The /system and I think the bootloader was messed up as well.
Luckily sometimes the device could communicate with its storage, but most of the time it couldn't.
3. Getting the drivers right is a total pain, sometimes one set of driver will work for one thing, and fail for others.
I used two laptops and switched back and forth messing with the 3 available driver settings in wugfresh.
For my problem the pnet drivers are not an option...because you have to be booted to install them, so I just switched between signed and raw. Also the USB ports you use deffidently matter so switch between those as well, if using a desktop use only the back ports.
Here are the steps I took, unfortunately they weren't precise so I can't really say what did it.
1. Download wugfresh, do the raw driver install (if you can use another machine and do the signed driver install).
2. Download the adroid sdk.zip, and extract it.
3. Use command line and go to the tools folder in the adroid sdk folder (I forget exact path, but it's the tools folder somewhere in the extracted folder).
4. Now type "fastboot oem unlock".
5. If fastboot is working right you should get the unlock screen, choose yes.
6. Mine froze here and I had to try several times until it worked..switch back and forth between the 2 comps if you have that option.
7. Once unlocked do the wugfresh "flash stock + unroot" with the "can't boot" option checked.
8. It may fail, but again switch back and forth between machines, and USB ports, if it works then you should be good to go.
One thing I noticed is that recovery showed it couldn't mount my sdcard, but after option 7, and it failed to write the /system, my bootloader changed to a more up to date version (android laying down) and it was able to see the sdcard (which shows me the recovery/bootloader where kinda screwed up in the first place). After I tried again after that maybe 1 or 2 times writing system was successful.
Thanks for all your help I'll click thanks on all you guys.
Novice here.
Ran the All-in-One utility today and after the CWM installed I hit "Perm root" without reading the thing below telling me to boot to recovery first. It's now stuck in boot loop. Everything went off fine up until the Perm root. Even that said successful and then restarted. Only after the process was completed did the recovery loop begin. No HTC logo loop. Just reboots into CWM over and over no matter what technique I use (except for opening the case).
I've read this: http://forum.xda-developers.com/showthread.php?t=1599363
And am trying to install ADB to push ANY possible ROM over to the SD card. My recovery allows the toggle of /mount sdcard and /mount system, however adb fastboot push doesn't work. "error: device not found"
And I can't do this: http://forum.xda-developers.com/showthread.php?t=1644730 because my phone is stuck in the recovery loop. If I try volume down + power, it just comes back to recovery screen. I've tried factory reset, I've tried wiping cache, I've tried wiping Dalvik, and still nothing. I did flash the SuperSu.zip after I had used the Perm Root button on Haroon2000's app.
I'm incredibly flustered as I've rooted devices for years and this is my first problem. I've seen similar complaints all with ideas of breaking into the phone and unplugging it's battery so I can get to the bootloader etc, but I'm so very confused. So many posts telling me to do so many things.
Can someone please help break down a tangible solution here? I'm freaking out.
Cheers
EDIT: If someone can get my phone fixed, I'll Paypal them $50 USD. I really need my phone back ASAP :\
I don't know if this is your solution, but you did not mention it as one of your attempts.
Have you looked into running an RUU?
Sent from my HTC One S using xda premium
beats4x said:
I don't know if this is your solution, but you did not mention it as one of your attempts.
Have you looked into running an RUU?
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
I'll update this again once I try breaking the phone down and yanking the battery. But I have tried running the RUU. I can't get to the bootloader right now and it's not listing the device when I adb devices.
I'm going to go home from work since I've spent 7 hours on two machines (XP/7) trying to fix this PoS and redo everything from the ground up. Hopefully my anger will have overcome it.
Something I've noticed however, is that within the CWM recovery, I can use the All-in-one tool to reboot the phone. So it is reacting to ADB commands. Perhaps trying to use ADB fastboot (Right-click method) instead of full ADB installation could be a problem with trying to push a ROM zip. Also, as far as the RUU goes. I don't remember what happened there. I'll edit this when I get home.
nik.the said:
I'll update this again once I try breaking the phone down and yanking the battery. But I have tried running the RUU. I can't get to the bootloader right now and it's not listing the device when I adb devices.
I'm going to go home from work since I've spent 7 hours on two machines (XP/7) trying to fix this PoS and redo everything from the ground up. Hopefully my anger will have overcome it.
Something I've noticed however, is that within the CWM recovery, I can use the All-in-one tool to reboot the phone. So it is reacting to ADB commands. Perhaps trying to use ADB fastboot (Right-click method) instead of full ADB installation could be a problem with trying to push a ROM zip. Also, as far as the RUU goes. I don't remember what happened there. I'll edit this when I get home.
Click to expand...
Click to collapse
Okay, update.
I was able to get ADB working and detect my phone.
Next, I was able to push Venom Rom to phone. I factory reset, wiped cache, wiped Dalvik, and was able to install Venom.zip. It then asked to reboot (per Venom screen) and I said okay. It then returned to CWM Recovery. I was confused but left everything as is. I have now reset the phone by holding the power button for around 10 seconds. It then restarted to the HTC Quietly Brilliant screen. I have been looking at that screen for about 5 minutes.
Also pertinent: I did try to run the RUU, but it didn't connect through USB. (I forget what it said verbatim). So that didn't work. I also was able prior to this entire process get into the bootloader via dumb luck.
Any suggestions? I am staring at the HTC boot screen still. Do I try to restart and enter bootloader? If so, then what? It seems there is something wrong with CWM. Can I switch recoveries? Can I uninstall it?
Calm down we have all been there,
When you flashed venom did you flash the boot image? Also i use twrp instead of cwm i find twrp better .
To enter bootloader hold power button and down vol together .
As gazknight said, this seems like proper kernel not being flashed or having an issue. If you flashed the boot.img with fastboot, try again erasing cache from fastboot first. The commands are as follow:
fastboot erase cache
fastboot flash boot boot.img (where this boot.img is the one inside the zip from the rom you choose and must be left in the same folder than fastboot)
It happened to me a couple times when i was on hboot 1.14 that I had to flash the boot.img a second time sometimes, somehow it was not working the first time, randomly, even though the flash had completed ok on fastboot.
If still doesn't work try doing a factory reset from TWRP and flashing ViperOneS again.
If that still doesn't work, you might want to try another rom, like TrickDroid, you would then have to flash the boot.img from this other room with fastboot, remember that.
Try and let us know
Hold down volume down while you're trying to boot, that will get you in boot loader, go to fast boot by pressing the power key, connect your phone to your computer, run the flash viper boot img thingy and you're set!
Envoyé depuis mon HTC One S avec Tapatalk
Same issue with HTC One S bricked but in European version, Stock ROM
hello,
I did't want to start a new topic, as I'm experiencing a similar issue with my HOS. Briefly, yesterday morning I plug the phone from charger at 06.00 am. Play with it for a while and then go to work. Used it at work for a few phone calls until 10.00 am (so 4 hours on fully charge battery). Then at 10.00 am I went into a meeting and left the phone out of my sight for 20-30 minutes. When I came back from the meeting I realize that the phone was closed. I try to open it (power button) but nothing. Press power for 10-30 seconds with volume down - still no effect.
Then I took the charger (the original one that I always use to cherge it) and plug it, left it for 2-3 minutes and press power. The phone starts but all I have is the white screen with HTC logo and if I press the power button + volume down the phone goes into bootloader. That's all I can do with it for now.
I have stock rom, bootloader is locked and I never try to root the phone. Is it any chance to repair it by myself or I have to sent it to the repair shop.
many thanks in advance.
Alright so I feel like I'm getting closer.
Here's whats happening now. It's in the HTC boot screen loop. I can get it into bootloader whenever I want, but now it's not detecting /sdcard in recovery. Within the bootloader, fastboot won't detect my device and my computer (Windows 8) claims the device is malfunctioning. I can still use fastboot adb commands from my computer when it is in recovery. I have gone into bootloader and cleared storage, as well as factory reset after. Also, it used to reboot into recovery endlessly. Now it appears that isn't hte case and reboots from recovery into the OS, but will not work.
I'm going to try and flash using adb w/o sdcard the boot.img as suggested above. I'll keep updating so others can know the process if they soft-brick their phone (I'm assuming this is a soft brick because I can still run things etc).
Update: trying to do fastboot erase cache from within recovery gives me "Waiting for device". As I've said, for some reason, it says the device is malfunctioning/not detected when I'm in the 1.14 Hboot Bootloader. But again, I can issue adb devices from within recovery. Sdcard still not mounting.
Edit: I'm issuing adb commands through adbfastboot files. Do I need to have the Android SDK fully installed with the Manager thing, or does the basic adbfastboot work (From here: http://www.htconeforum.com/forum/ht...e-your-htc-one-s-back-100-stock-relocked.html). That adb fastboot has the following files: adb, fastboot, adbwinapi.dll, adbwinusbapi.dll.
I think the source of the current problem is that I can no longer access my /sdcard or mount it. One step forward, then two steps back -_-.
nik.the said:
Alright so I feel like I'm getting closer.
Here's whats happening now. It's in the HTC boot screen loop. I can get it into bootloader whenever I want, but now it's not detecting /sdcard in recovery. Within the bootloader, fastboot won't detect my device and my computer (Windows 8) claims the device is malfunctioning. I can still use fastboot adb commands from my computer when it is in recovery. I have gone into bootloader and cleared storage, as well as factory reset after. Also, it used to reboot into recovery endlessly. Now it appears that isn't hte case and reboots from recovery into the OS, but will not work.
I'm going to try and flash using adb w/o sdcard the boot.img as suggested above. I'll keep updating so others can know the process if they soft-brick their phone (I'm assuming this is a soft brick because I can still run things etc).
Update: trying to do fastboot erase cache from within recovery gives me "Waiting for device". As I've said, for some reason, it says the device is malfunctioning/not detected when I'm in the 1.14 Hboot Bootloader. But again, I can issue adb devices from within recovery. Sdcard still not mounting.
Edit: I'm issuing adb commands through adbfastboot files. Do I need to have the Android SDK fully installed with the Manager thing, or does the basic adbfastboot work (From here: http://www.htconeforum.com/forum/ht...e-your-htc-one-s-back-100-stock-relocked.html). That adb fastboot has the following files: adb, fastboot, adbwinapi.dll, adbwinusbapi.dll.
I think the source of the current problem is that I can no longer access my /sdcard or mount it. One step forward, then two steps back -_-.
Click to expand...
Click to collapse
You might need to do it as administrator.
I think I've got it. One last tip. All of the above has been helpful, but I think the problem was trying to use my Windows 8 laptop. The second I got to work, I plugged it in on the bootloader to my XP machine and voila! it recognized fastboot and listed devices.
I have tried to run the RUU 2.35.531.7 but just like unrooting my old phone, I had issues because that update was already on this phone, so it goes through the entire process only to tell me on the windows XP utility that it had failed because it was the wrong update. When I did this to my old One S right before I sent it into Tmobile for warranty, it did the same thing with the 1.53 RUU, then when I found the 2.35, it worked like a charm.
So my last question (hopefully) then is, am I missing something as for installing an OLD or exact same RUU? Or is there a newer one than the 2.35.531.7?
I haven't tried on a Windows 7 machine, but I have one available here at work. I'm wondering if I should try to fastboot a ROM. Any suggestions what I can do to get it back to stock, or an old old stock version? I'd like to root it so I can use my Titanium Backup.
Update: Before ending this reply, I read that the RUU may be failing because the bootloader is unlocked/tampered still. I'm going to run it again to grab the error code to make sure of the issue, because it seems you should be able to revert or use any RUU (correct?).
nik.the said:
I think I've got it. One last tip. All of the above has been helpful, but I think the problem was trying to use my Windows 8 laptop. The second I got to work, I plugged it in on the bootloader to my XP machine and voila! it recognized fastboot and listed devices.
I have tried to run the RUU 2.35.531.7 but just like unrooting my old phone, I had issues because that update was already on this phone, so it goes through the entire process only to tell me on the windows XP utility that it had failed because it was the wrong update. When I did this to my old One S right before I sent it into Tmobile for warranty, it did the same thing with the 1.53 RUU, then when I found the 2.35, it worked like a charm.
So my last question (hopefully) then is, am I missing something as for installing an OLD or exact same RUU? Or is there a newer one than the 2.35.531.7?
I haven't tried on a Windows 7 machine, but I have one available here at work. I'm wondering if I should try to fastboot a ROM. Any suggestions what I can do to get it back to stock, or an old old stock version? I'd like to root it so I can use my Titanium Backup.
Update: Before ending this reply, I read that the RUU may be failing because the bootloader is unlocked/tampered still. I'm going to run it again to grab the error code to make sure of the issue, because it seems you should be able to revert or use any RUU (correct?).
Click to expand...
Click to collapse
The bootloader does need to be relocked for the RUU too work and the RUU you used before should work because I have used the same RUU a few times and it worked fine.
Darknites said:
The bootloader does need to be relocked for the RUU too work and the RUU you used before should work because I have used the same RUU a few times and it worked fine.
Click to expand...
Click to collapse
I'll try that. thanks.
Now on the same XP computer, it's not showing when I adb devices, however it does show in device manager. This changed after trying to do the RUU without relocking.
Yeah! Fixed!
After enough toggling, I changed the recovery to the T one and relocked my bootloader. It turns out detecting the device wasn't necessary somehow. Then I ran the RUU and voila!
nik.the said:
I'll try that. thanks.
Now on the same XP computer, it's not showing when I adb devices, however it does show in device manager. This changed after trying to do the RUU without relocking.
Click to expand...
Click to collapse
Not sure whats up with that, never had any issue on win7.
Windows 8 fastboot works on my laptop for some reason. I installed the drivers from the HTC Sync folder.
Sent from my HTC One S using Tapatalk 2
Hi there,
i have a huge problem. As there was no warrenty left for my One S I thought about to change the firmware to CM11.
I have to admit that i don't have any experience in doing such things, but i thought, it couldnt go wrong if i follow a tutorial.
So at first i unlocked the bootloader via HTC website and istalled TWRP 2.7.1 (latest version). Everything went well, I placed the ROM into the phones root directory, started the recovery and then whiped it before choosing install and selected the file. After about 30 seconds the phone reported the step was successful and i pressed reboot. Then there was the HTC starting screen and then a black screen.
After that i had no reaction but the blinking buttons when i press the power button for a longer time. But it changes nothing. No normal boot. No access to fastboot. Only if i connect it to my PC there is an aditional device to see, but whitout any access.
I know I did wrong but i have no idea what or how to fix it. I hope you can help me.
ElDorado1993
Now i found a way to get access to fastboot again, but i dont really know what to do now.
Can you give me an detailed tutorial, for jelly bean or kitkat (dont matter) that is surely working now?
My main problem is that i can't copy my files into the root directory as i cant boot the phone.
Does it show up in computer connected devices?
If it does, download stock kernel and ROM and upload to phone and go into recovery[power +volume up while off] and flash them both kernel first.
Sent from my ZTE_N9511 using XDA Free mobile app
The problem is the phone wasnt ever shown as device on the pc (like a flash drive) since version 4.1 so I allways needed some tricks like airdroid. So i suppose i need adb commands to copy files and i dont have so much experience in doing this.
Do you know how to use adb?You don't need adb I just wanted to know to see if it shows up there and not on computer you simply need to install the drivers.Try holding down all 3 buttons to see if it powers down. Do what it says http://www.technewscentral.co.uk/enter-fastbootbootloader-mode-htc-one/id_7930 if works go into fast boot. Does it say locked or unlocked. If unlocked go herehttps://github.com/koush/UniversalAdbDriver and get the windows installer if your on windows.
Sent from my ZTE_N9511
I now found out how adb and fastboot are working, but the main problem now is, that it says the sdcard cant be mounted. I tried this tutorial http://forum.xda-developers.com/showthread.php?p=25557817#post25850720 but i dont know how to do the first step. Du i need an extra file and where do i get it from and how to use it. As long as i dont get back this access, i couldnt install any OS. I tried also sideload. It was able to copy but cant install because of the missing sdcard access.
I hope you can help me to become my phone running again.
Go here http://m.youtube.com/watch?v=xWmnHwkDrKk but first type adb devices in cmd. If it shows ur HTC type adb shell and and type mount sdcard next to the "#" once it appears although you should be using the fastboot shell not adb commands.adb should only work on a powered on device or you can use fast boot in cmd while phone is in fastboot not recovery(you did say the phone can go into fast boot right?). Just make sure you got the right drivers and both fast boot and adb. You should get Koush's Universal drivers from my previous post since some phones have multiple drivers and MAY cause problems with cmd. Also HTC one S doesn't have expandable storage correct?
Sent from my ZTE_N9511
Wow. Now I incidentally soft bricked my phone again if you would believe it and nothing works this time.
Have you been able to fix?
Sent from my ZTE_N9511
Okay, i forgot to write but adb and fastboot are working on my Mac. I use the Mac because Win 8.1 has the known driver problems.
I tried a lot now, but i recognized maybe the main problem. My phone is still S-ON in bootloader. For sure thats the problem. Do I need to get rid of it and how do I do. The tutorial i used hasn't mentioned this step, maybe the person was still S-OFF.
The first thing i try now is to flash the original recovery, lock the bootloader and execute the original signed RUU to get back the original software first. Im going on holiday on tuesday and it would be a pitty without the phone. When I get it working i will leave it, and thy it again, when I'm back. Otherwise.......****
Use this tutorialhttp://htc-one.wonderhowto.com/how-to/fix-soft-bricked-htc-one-by-flashing-new-rom-via-adb-0154361/unless its the one you used already. From boot loader you were supposed to have gone to fastboot.boot loader has to be unlocked.From fast boot you flash TWRP.IMG which happens to have a special adb side load feature under advanced options. There you upload another ROM and kernel.here is the full list of supported devices as I don't know what variant or carrier you havehttp://teamw.in/twrp_view_all_devicesAlso, a stock kernel is optional but it always seems to fix my problems.
Sent from my ZTE_N9511
Thank you. But I already did it like this. The issue is, than after using sideload successfully the installation fails because of the known "unable to mount storage" text. And i don't know what to do wrong.
Like I already said, my phone is still S-ON, but can this make a difference?
Now i got it to bring the stock ROM running again, and as I'm on holiday for a few days I'm happy it is working again.
But one thing is left. It seems like there is no 3G/HSDPA connection now, only EDGE. I dont know what went wrong. Did you hear about this problem.
By the way, my phone is the standalone version whithout any provider.
Search the forums about edge only. There is a huge thread on this.