I have two samsung infuses my father gave me to put custom roms on. My personal one had ICS on it, and I never had a problem flashing it. These two both failed in odin. I'm just trying to get back to stock, but when i flash them they fail part way through, even tried one click and it failed on step 4 of 6.. If anyone can help, it would be very much appreciated..
Thanks
Either the connection was interrupted, or odin messed up. You could try flashing with heimdall, if you can get to the connect to PC screen, or download mode. If you can't, you could make/buy a USB jig to put it into download more and try flashing with heimdall.
Sent from my SGH-I997 using xda app-developers app
magnetboard said:
Either the connection was interrupted, or odin messed up. You could try flashing with heimdall, if you can get to the connect to PC screen, or download mode. If you can't, you could make/buy a USB jig to put it into download more and try flashing with heimdall.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
I know something messed up, i have tried heimdall one click.. but it freezes at factoryrfs. It starts the first bar then stops.
Try rebooting you PC
Sent from my SGH-I997 using xda premium
TJj33p3rz said:
Try rebooting you PC
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
Tried that, and on two computers. One with xp and one with 7.
Reason I said that my PC ask strange at times.The other day I had to run heimdal 6 times before it finally took.
Sent from my SGH-I997 using xda premium
TJj33p3rz said:
Reason I said that my PC ask strange at times.The other day I had to run heimdal 6 times before it finally took.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
I have heimdall front loader or something like that downloaded, not sure how to use.. any help?
To make things easier, you should download a heimdall one-click. That will get you going. I use stock uclb3, with boot loaders but you shouldn't need those
Sent from my SGH-I997 using xda app-developers app
magnetboard said:
To make things easier, you should download a heimdall one-click. That will get you going. I use stock uclb3, with boot loaders but you shouldn't need those
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
I've used uclb3 and uclb4, they make it part way and failed at the fourth step.
What is the 4th step?
magnetboard said:
What is the 4th step?
Click to expand...
Click to collapse
Uploading factoryfs, I just tried it again, and it failed at uploading kernel.. I just want to give these back, one stock, and the other with ICS.. I never had these problems the first time I ever flashed...
Have you tried running them as an Administrator? Sometimes that helps with flashing issues.
magnetboard said:
Have you tried running them as an Administrator? Sometimes that helps with flashing issues.
Click to expand...
Click to collapse
Yepp everytime, it seems like one tiny thing is holding it back.. I just tried flashing via odin again, and it stopped at factoryfs. Im going to reboot my computer for the last time tonight and seems if it works.
Have you tried reinstalling drivers? On a system running bot odin and Heimdall, drivers tend to get messed up. Uninstall the Heimdall drivers, then Odin. Then install ODIN drivers, then install the heimdall driver while the phone is plugged into a different port. This setup has always worked for me.
magnetboard said:
Have you tried reinstalling drivers? On a system running bot odin and Heimdall, drivers tend to get messed up. Uninstall the Heimdall drivers, then Odin. Then install ODIN drivers, then install the heimdall driver while the phone is plugged into a different port. This setup has always worked for me.
Click to expand...
Click to collapse
I've never uninstalled them because I could hook my infuse up with no problems and flash it.. I've used kies mini and reinstalled them though.
Well Kies only installs ODIN drivers, you also have to install Heimdall drivers using Heimdall. I would recommend switching usb ports also
Try switching usb cables. That may be causing the flash to get stucked
andros11 said:
Try switching usb cables. That may be causing the flash to get stucked
Click to expand...
Click to collapse
Thats the only thing I haven't tried doing, because I only had one cord that worked flashing mine.. you'd think if it worked on mine to flash before it would though, but its worth a try considering I"ve never had the factory cord.
Tank Weston said:
Thats the only thing I haven't tried doing, because I only had one cord that worked flashing mine.. you'd think if it worked on mine to flash before it would though, but its worth a try considering I"ve never had the factory cord.
Click to expand...
Click to collapse
Yup I have 10 USB cable all will charge the phone only 4 the PC sees those came from wally world
Sent from my SGH-I997 using xda premium
Related
Think i really bricked it this time. Went back to stock then decided to root a few days after and now while connected to odin my screen just turned pixelated. Im stuck
Sent from my SAMSUNG-SGH-I727 using xda premium
Can you Get into download mode??
If you can its as simple as redoing Odin. By pixelated you mean when you try to go into dl it does but is ilegible?
Sent from my SAMSUNG-SGH-I997
Yeah. It lets me in dl mode and just gets stuck on the factoryfs. Im using unbrick odin now. Hopefully it works. But the pixels are tiny and all over and diff colors
Sent from my SAMSUNG-SGH-I727 using xda premium
Stuck on kernal now. Wth!
Sent from my SAMSUNG-SGH-I727 using xda premium
Did you get it back?
Didn't sounded like it was truly bricked. Just borked.
Try adam's heimdall if you are still having trouble.
http://forum.xda-developers.com/showthread.php?t=1331381
Keeps freezing part way thru. Got it in to recovery but when i hit reboot it went to the samsung screen then back in.
Sent from my SAMSUNG-SGH-I727 using xda premium
Factoryfs keeps failing. What do i do
Sent from my SAMSUNG-SGH-I727 using xda premium
please, tell me the way (step by step) how you flash and the odin-sections you use.
(sorry for my terrible letters)
Justinfedor said:
Factoryfs keeps failing. What do i do
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I had the same problem ages ago, accidentally yanked the cord when flashing back to stock and was met with a rainbow/black pixel screen and after using Gtg's odin encountered the failed factory.fs message.
Try THIS return to stock method instead. Once you get to the thread, find Question 4 in the FAQ section of the thread. (seems to address your issue)
IMO this method is easier to use and you can flash to a rooted+3e froyo.
Hope this helps...
xIC-MACIx said:
I had the same problem ages ago, accidentally yanked the cord when flashing back to stock and was met with a rainbow/black pixel screen and after using Gtg's odin encountered the failed factory.fs message.
Try THIS return to stock method instead. Once you get to the thread, find Question 4 in the FAQ section of the thread. (seems to address your issue)
IMO this method is easier to use and you can flash to a rooted+3e froyo.
Hope this helps...
Click to expand...
Click to collapse
Odin wont recognize dl mode anymore. Ran the other process and it finally went thru to the end. Said rebooting now but never did. Screen wont turn on except for dl mode. Tried unbrick and the all in one. I got no results
Sent from my SAMSUNG-SGH-I727 using xda premium
Eff it. Got a new paper weight
Sent from my SAMSUNG-SGH-I727 using xda premium
a few things I would try first
use a different PC.
Install to latest java
download adam's heimdall
run heimdall
get the drivers
put your phone in download mode (shut off, pull battery, press vol +/-, battery in, USB
if correct, heimdall should show connect
go to heimdall options
list device
samsung or android
run zadig
heimdall flash
if it goes back to recovery, second flash with bootloader checked and flash again
gl
let me know...
Halfway thru dbdatafs then said unsuccessful. Keeps doing that
Sent from my SAMSUNG-SGH-I727 using xda premium
Got it. Thank you so so much
Sent from my SAMSUNG-SGH-I727 using xda premium
Only thing is it says im on gb 2.3.6
Sent from my SAMSUNG-SGH-I727 using xda premium
yeah. 2.3.6 is current. you're in stock..
follow adam's post to get recovery
2.3.7 is MIUI
hit the thanks if I helped
I cant get odin to recognize it now after i fixed the phone. Removed kies and reinstalled
Sent from my SAMSUNG-SGH-I727 using xda premium
Use a different USB port...it's kinda funny that way.
heimdall's open-source drivers use libusb. zadig will install libusb for only one usb port. This will be your heimdall port. The rest will retain the odin drivers. just use another usb port. Don't reinstall drivers.
The Heimdall One-Click will bring you back to stock. Our server is down right now so just wait if you're trying to download. I packaged GTG's back to stock as well as KH3(i think) into one-click format. It's at http://files.teamkomin.com then click the infuse4g folder and select a download.
AdamOutler said:
heimdall's open-source drivers use libusb. zadig will install libusb for only one usb port. This will be your heimdall port. The rest will retain the odin drivers. just use another usb port. Don't reinstall drivers.
The Heimdall One-Click will bring you back to stock. Our server is down right now so just wait if you're trying to download. I packaged GTG's back to stock as well as KH3(i think) into one-click format. It's at http://files.teamkomin.com then click the infuse4g folder and select a download.
Click to expand...
Click to collapse
Thanks, Adam.
I was just passing along what I learned from you.
any chance of a heimdall one click UCKK4?
Alright so I messed up my phone again, and I tried to Heimdall One-Click and it says "Uploading KERNEL KERNEL upload failed! Ending session..."
What exactly do I need to do from here?
All help is appreciated, thanks.
Do you have a JIG? I bought mine from ebay for a buck and it works.
Also even that download mode doesn't show up, as long as ODIN can see the COM port you can start flashing.
Another solution, would be using Heimdall one-click recovery with unbrickable mode, if you dare to open your phone and you are good at soldering.
Yeah dont do anything suggested above that involves taking your phone apart.
That is a alternate download mode. Click on the purple link in my signature, read the guide linked and then flash the one click I have. It will get you back to stock with root so you can flash any of the other roms for this device.
Can you be a bit more specific I really don't know where to start...
Skorpion_ said:
Can you be a bit more specific I really don't know where to start...
Click to expand...
Click to collapse
I'm guessing you haven't flashed back to stock before, use this guide to go back to stock
http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2
Then you can go over to bhundven's One-Click Heimdall and flash AntonX's kernel, you can flash a custom ROM from there. Make sure to follow instructions, if you don't then there is a chance you're phone will be forever bricked.
Ok, i got it to work. But my phone is not being recognized as in download mode. It still says ""Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again". And yes I did pull the battery out and back in, then held down power up and down and plugged it into the usb. Any ideas? :\
Rename it some one word name
Sent from my SGH-T959V using xda app-developers app
Skorpion_ said:
Ok, i got it to work. But my phone is not being recognized as in download mode. It still says ""Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again". And yes I did pull the battery out and back in, then held down power up and down and plugged it into the usb. Any ideas? :\
Click to expand...
Click to collapse
Make sure you have the drivers properly installed
brandonc0526 said:
Make sure you have the drivers properly installed
Click to expand...
Click to collapse
Thanks, it worked and im back to stock GB.
Skorpion_ said:
Thanks, it worked and im back to stock GB.
Click to expand...
Click to collapse
Glad to help
Alright so I messed up my phone again, and I tried to Heimdall One-Click and it says "Uploading KERNEL KERNEL upload failed! Ending session..."
Please help!
How can you brick your phone again for the 2nd or more times?!?! That's ridiculous, what were you trying to do?
th3controller said:
How can you brick your phone again for the 2nd or more times?!?! That's ridiculous, what were you trying to do?
Click to expand...
Click to collapse
I'm a noob at this.. Do you have a solution for the kernel failing? :\
Skorpion_ said:
I'm a noob at this.. Do you have a solution for the kernel failing? :\
Click to expand...
Click to collapse
Most of the time that is because of bad connection to the computer. Try a different cable. Heimdall is very finicky, you might try gremlin remover.
eollie said:
Most of the time that is because of bad connection to the computer. Try a different cable. Heimdall is very finicky, you might try gremlin remover.
Click to expand...
Click to collapse
I tried a different cable, still nothing. And gremlin remover doesn't have any download links...
Try uninstalling the SAMSUNG/Android drivers, and restart the entire process. And this time try a different USB port, one that's barely used. Cause the port you might have plugged it in might be worn out.
th3controller said:
Try uninstalling the SAMSUNG/Android drivers, and restart the entire process. And this time try a different USB port, one that's barely used. Cause the port you might have plugged it in might be worn out.
Click to expand...
Click to collapse
Maybe its the actual phones port, because I tried it on my brand new laptop, and my older desktop. Both gave same error. Will try to reinstall drivers right now.
When you run zadig does it recognize the device?
Sent from my SGH-T959V using xda app-developers app
TwitchyEye said:
When you run zadig does it recognize the device?
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
Issue solved. I had to sort of jam the wire into the phone while it flashed.
I'm not very great with the correct terms, but I'll try to spell out my issue as best as I can. I have cm9 installed on my skyrocket, I tried to flash another rom and had issues with it. I then tried to flash back, but cwm seemed to be stuck formatting /cache. The friend helping told me to reboot and try again so did and then I started having boot screen issues. I can get my phone to download mode or cwm, but I can't seem to get odin to install the stock or for the cwm to finish (still stuck on formatting /cache.. goin on 2 hours). What did I do wrong and how can I fix this?
DETAILED help would be appreciated, but I'll take what I can get at this point. I'll re-explain anything that doesn't make sense.
I really just want to get back to stock.
What happens in ODIN -- does it also get stuck at formatting cache?
Have you tried any of the Heimdall one-click to restore to stock?
Let us know if that also gets stuck on formatting cache.
sb0 said:
What happens in ODIN -- does it also get stuck at formatting cache?
Have you tried any of the Heimdall one-click to restore to stock?
Let us know if that also gets stuck on formatting cache.
Click to expand...
Click to collapse
ODIN wouldn't always register my device and when it did it would either fail, complete in the description box after checking the md5, or fail due to the device de-registering.
At this point my my device is showing the "firmware upgrade encountered" screen with the yellow triangle. I didn't know about the Heimdall. I followed the directions on Kies to restore it that way, but it's not picking up my device even though my computer is.
Am I f*cked?
Yellow triangle sounds like download mode to me. See if any of the heimdall one click restores will see the phone n try to flash.
Also try using different USB cables, USB ports, different PC, etc...
Sent from my SAMSUNG-SGH-I727 using xda premium
Triangle is download mode
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
sb0 said:
Yellow triangle sounds like download mode to me. See if any of the heimdall one click restores will see the phone n try to flash.
Also try using different USB cables, USB ports, different PC, etc...
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I downloaded heimdall 1.3.2, having a tough time finding some good directions on how to use the heimdall. The ones in the "README" file talks about zadig. Do I need to use zadig also or just the heimdall? Or is there a good guide could recommend?
Use odin
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
Triangle is download mode
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
In its current condition all it does is boot directly to that screen. It also won't stay powered off unless I pull the battery. Think I could take it to at&t? Just an educated guess, but that being the only image I'm getting means that there isn't really anything on my phone right now? I'm thinking maybe I could say that my dog tripped my usb cable while I was updating in kies?
blindbaker said:
In its current condition all it does is boot directly to that screen. It also won't stay powered off unless I pull the battery. Think I could take it to at&t? Just an educated guess, but that being the only image I'm getting means that there isn't really anything on my phone right now? I'm thinking maybe I could say that my dog tripped my usb cable while I was updating in kies?
Click to expand...
Click to collapse
Use ODIN it can be fixed BY YOU
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Yes. If your phone can get download mode u can fix it urself. Try the diff USB cable/port pc I explained above. Just flash to stock using Odin or heimdall.
Sent from my SAMSUNG-SGH-I727 using xda premium
sb0 said:
Yes. If your phone can get download mode u can fix it urself. Try the diff USB cable/port pc I explained above. Just flash to stock using Odin or heimdall.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Its looking like my real issue right now is either, usb cable or the connection port. Finally got it to a friend's comp and his dad who has years of experience is working on it. Took him a new samsung cable today so hopefully it'll work out. Thanks for the help everyone. Sorry for my panic attack.
Ok so my phone is stuck on the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I have tried to flash a stock rom onto the phone but odin isnt even detecting it? I have it plugged in sitting on this screen with odin opened, but there isnt the [@com:x] message. I really need some help on how to get to download mode or how to flash another rom onto it.
Thanks
-Chronic
Have you installed the correct USB drivers?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
go through the " odin troubleshooting" section here http://forum.xda-developers.com/showthread.php?t=1652398, and reading the whole op wouldnt hurt
Yea that screen is still Download Mode.
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Emergency firmware recovery from kies if that's where you originally eencountered an error while updating firmware.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Jnewell05 said:
Emergency firmware recovery from kies if that's where you originally exported an error while updating firmware.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
What?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
plwalsh88 said:
Yea that screen is still Download Mode.
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
Yes i have read that on here multiple times, but odin will not detect the phone, although it did before, and even then, i would load the stock firmware into the PDA part of odin, but then when i hit start, it would stop at a point, then just idle.
-Chronic
xChronic said:
Yes i have read that on here multiple times, but odin will not detect the phone, although it did before, and even then, i would load the stock firmware into the PDA part of odin, but then when i hit start, it would stop at a point, then just idle.
-Chronic
Click to expand...
Click to collapse
Try a different data cable. Every issue I've ever had with Odin (or Kies for that matter) has been solved by ditching the stock cable and using some other random one I found. And that's exactly what would happen - it would connect, start up, and then just stop at a point.
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
xChronic said:
Yes i have read that on here multiple times, but odin will not detect the phone, although it did before, and even then, i would load the stock firmware into the PDA part of odin, but then when i hit start, it would stop at a point, then just idle.
-Chronic
Click to expand...
Click to collapse
Also try a different USB port, it worked for me before.
Sent from my SAMSUNG-SGH-I727 using xda premium
Remove all drivers from the USB port you plan on using for odin. This is a program I find very effective at that:
USB DEVIEW
Restart comp. Then follow the rest of Vincoms guide.
Alright so ive got the stock rom flashed over, but the phone is stuck on a rethink possible at&t loading screen loop. how do i get out of this to use the phone? (i have the phone plugged into the computer still)
xChronic said:
Alright so ive got the stock rom flashed over, but the phone is stuck on a rethink possible at&t loading screen loop. how do i get out of this to use the phone? (i have the phone plugged into the computer still)
Click to expand...
Click to collapse
Unplug it
Factory reset
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Need some help. Step dad's Infuze is boot looing at the samsung logo. Searched and found qkster's thread about using heimdall 1 click to flash UCLB3. Got the phone into dl mode, loaded drivers and started flashing. Stopped at kernel upload failed. Ending session. Don't know what to do, can I just unplug and start over? Thanks in advance for any help.
Rebooted into dl mode, now it is showing firmware upgrade encountered an issue. please select recovery mode in kies and try again. Please help, is this still fixable?
I can get the phone recognized by Heimdall, just that it stops when loading the kernel. Is there another way to load kernel when in the dl mode?
merikgvr4 said:
I can get the phone recognized by Heimdall, just that it stops when loading the kernel. Is there another way to load kernel when in the dl mode?
Click to expand...
Click to collapse
use a different usb data cord
qkster said:
use a different usb data cord
Click to expand...
Click to collapse
Ok will do.
Got bootlloader installed no more rainbow now bootlooping at att rethink possible.
Sent from my SGH-I897 using xda app-developers app
still bootlooping at att rethink possible. I can get into e3 recovery. Can I just load any of the roms with this recovery to fix the bootlooping? Please help, wanna get done with this. Thanks in advance.
merikgvr4 said:
still bootlooping at att rethink possible. I can get into e3 recovery. Can I just load any of the roms with this recovery to fix the bootlooping? Please help, wanna get done with this. Thanks in advance.
Click to expand...
Click to collapse
Try running again and again if necessary until flashes and boots into ROM then Use one of the kernels in the same thread of qkster's that includes root and CWM recovery
Keep trying different ports, different USB cables, reboot computer,use different computer if available
elbscorp said:
Try running again and again if necessary until flashes and boots into ROM then Use one of the kernels in the same thread of qkster's that includes root and CWM recovery
Keep trying different ports, different USB cables, reboot computer,use different computer if available
Click to expand...
Click to collapse
Thanks will try different ports. I'll use the ones in the back next
Sent from my SGH-I897 using xda app-developers app
merikgvr4 said:
Thanks will try different ports. I'll use the ones in the back next
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
either odin or heimdall works. you have to believe that. the frustration is getting a pc with usb port and a usb cord and your phone to align and work correctly. usually after a few driver install or java update or reboot..something works.
your other situation where you kinda had it recognized and almost completed a flash, try different usb cords. hold it steady, wipe the ports..etc..connection is prolly loose
qkster said:
either odin or heimdall works. you have to believe that. the frustration is getting a pc with usb port and a usb cord and your phone to align and work correctly. usually after a few driver install or java update or reboot..something works.
your other situation where you kinda had it recognized and almost completed a flash, try different usb cords. hold it steady, wipe the ports..etc..connection is prolly loose
Click to expand...
Click to collapse
Yeah frustrating it really is. Will fire up the old xp boxen and see if I get better results with that.
While reading up yesterday, I saw some posts about corrupted efs causing the att screen bootloop. Is there anything else?
I don't think it is a power button problem as the phone doesn't turn on when I insert the battery.
Finally, you think it is safe to use a custom rom if the stock one is bootlooping on the at screen?
Thanks again, will go back to reading and trying stuff after dropping off my son to daycare.
:good: