Related
After attempting to install Sense Droid RC0 my phone can not boot either stock or custom ROM.
I need help!
go to cwm and restore backup?
Aspire said:
go to cwm and restore backup?
Click to expand...
Click to collapse
Restore backup don't work.
I installed S5670XXKPU, I go in Android system recovery > wipe data/factory reset and got this:
Confirm wipe of all user THIS CAN NOT BE UNDONE.
After I go on Yes - delete all user and got this:
Appling Muti-CSC
-Wiping data...
Formating /data...
Formating /cashe...
Data wipe complete.
I go on reboot system now.
Appears logo with the music, then on the display writes SAMSUNG, then the logo again, but without music and so constantly.
y do u go to recovery to wipe data and cache???flashing a new firmware means data and cache is automatically wiped.just flash kpu using odin and then let it reboot on its own.data and cache get wiped on it own.
secondly i flash firmware with 4 files like kpi first and then flash firmware with 1 package.otherwise it dont boot.
maybe u can try to re-flash frimware via odin
When I restarted system, appears the yellow text and in the bottom reads: Can not mount / data Rebooting ...
Syfer_Fever said:
maybe u can try to re-flash frimware via odin
Click to expand...
Click to collapse
I installed S5670XXKPU via ODIN.
yoyohoneysingh said:
y do u go to recovery to wipe data and cache???flashing a new firmware means data and cache is automatically wiped.just flash kpu using odin and then let it reboot on its own.data and cache get wiped on it own.
secondly i flash firmware with 4 files like kpi first and then flash firmware with 1 package.otherwise it dont boot.
Click to expand...
Click to collapse
Yes, I do u go to recovery to wipe data and cache. I flashed new firmware via ODIN.
The problem remains the same.
now i know your problem.
first flash a firmware like kpi which has 4 files like csc,boot,code and phone.
then flash kpu on that which has only one file using one package.and done.
dont wipe data and cache after that
maybe u should try another baseband, and do wipe data/cache after and before flashing frimware via odin
Try this:
-Download any of the custom ROMs you like from the development section.
-Copy to SD Card
-Boot into recovery
-Mounts&Storage>>Format /system
-Clear data&cache
-Install ZIP
-Reboot
It should work now.
yoyohoneysingh said:
now i know your problem.
first flash a firmware like kpi which has 4 files like csc,boot,code and phone.
then flash kpu on that which has only one file using one package.and done.
dont wipe data and cache after that
Click to expand...
Click to collapse
I did as you advised and the problem is resolved. Thanks.
ZmisiS said:
I did as you advised and the problem is resolved. Thanks.
Click to expand...
Click to collapse
Thank god this guy atleast know something.
ZmisiS said:
I installed S5670XXKPU, I go in Android system recovery > wipe data/factory reset and got this:
Confirm wipe of all user THIS CAN NOT BE UNDONE.
After I go on Yes - delete all user and got this:
Appling Muti-CSC
-Wiping data...
Formating /data...
Formating /cashe...
Data wipe complete.
I go on reboot system now.
Appears logo with the music, then on the display writes SAMSUNG, then the logo again, but without music and so constantly.
Click to expand...
Click to collapse
I have the same problem... how can we fix this?
I found something...
yoyohoneysingh said:
now i know your problem.
first flash a firmware like kpi which has 4 files like csc,boot,code and phone.
then flash kpu on that which has only one file using one package.and done.
dont wipe data and cache after that
Click to expand...
Click to collapse
And you said it worked, I hope it will work for me too...
Nymmath said:
I have the same problem... how can we fix this?
I found something...
And you said it worked, I hope it will work for me too...
Click to expand...
Click to collapse
You seem to yoyohoneysingh says:
Wih ODIN you install S5670XXKPI, after install ROM you want.
yoyohoneysingh said:
@HellRaiser hahaha..........i m not a noob as i seem.
@nymmath follow the solution i gave on previous page it will surely solve your problem.
Click to expand...
Click to collapse
I'm downloading XXKPI at this moment and I hope it will work xD.
Ok best of luck as i am sure it works.
Though i know how to solve this problem i am searching for real reason for this problem i.e. why does this really happen.
First of all i thought it was just me but now i can see a lot of other people face this problem.
Any reason guys????
yoyohoneysingh said:
Ok best of luck as i am sure it works.
Though i know how to solve this problem i.am searching for real reason for this problem i.e. why does this really happen.
First of all i thought it was just me but now i can see a lot of other people face this problem.
Any reason guys????
Click to expand...
Click to collapse
We installed SenseDroid...
Stock ROM installed. It worked for me too. Thanks man.
try installing "stock rom" via odin and after that wipedata reboot the system.....
Hello Guys,
Someone can help me ?
I´m trying to restore my original rom....but show this when i´m was doind in CWM
Error While Restorining /system
I´m using the Rom Mananger Mod v 5.0.0.6 Premium
I can restore in the advanced restore...all itens....but not the system too...
I made 3 differents backup of my rom before change that...but all have the same problem when i try to restore..
My phone is P920h. V20a
FIY: i clean all wipe data/cache before to try restore...but the same error...
Are you an the same baseband as the nandroid backup were you on 20a when you made the backup and are you still 20a
sent from my acidhazard thrill
lferrazini said:
Hello Guys,
Someone can help me ?
I´m trying to restore my original rom....but show this when i´m was doind in CWM
Error While Restorining /system
I´m using the Rom Mananger Mod v 5.0.0.6 Premium
I can restore in the advanced restore...all itens....but not the system too...
I made 3 differents backup of my rom before change that...but all have the same problem when i try to restore..
My phone is P920h. V20a
FIY: i clean all wipe data/cache before to try restore...but the same error...
Click to expand...
Click to collapse
probably you hadn't enough memory, when you backuped you rom.. you can't restore the system through cwm, you will have to extract it first.. do you have a bootloop? cause then you have to flash a kdz file
wayno140 said:
Are you an the same baseband as the nandroid backup were you on 20a when you made the backup and are you still 20a
sent from my acidhazard thrill
Click to expand...
Click to collapse
Yes, i´m in the same baseband, i really don't know more can i do...because it's my 5fh try to change...and i never get a nice rom...and never can return to origina....=/
GentlyCriminal said:
probably you hadn't enough memory, when you backuped you rom.. you can't restore the system through cwm, you will have to extract it first.. do you have a bootloop? cause then you have to flash a kdz file
Click to expand...
Click to collapse
Really i don't know if i had memory when i tryed...i need to have memory in internal sd, ext sd? or phone memo?
I didn't know i needed to extract my backup...
I don't know whats a bootloop? what they do?
Have a tutorial about this?
Thank you
any update on this
I was just having a problem with custom firmware. To get my original ROM back I simply pluged it into the official LG updater and it "updated" it back to the original firmware hope this helps
Note steps I took
Enter recovery wipe data then wipe cache
plug phone into computer
Ran LGMobile update
wait for error
Run LGMobile update again
wait for everything to finigh
enter recovery again wipe data /cache once again
boot up phone with original firmware and enjoy
also note that I did not make a recovery image all I did was plug it into the Lgmobile updater... It was a nail biter for a min I forgot to wipe the data and cache a second time after the "update" from the LGmobile updater and it sat and flashed the phone logo over and over. however after the second data wipe and cache wipe it booted and reconnected to the network again which ws the problem I was having with all the other custom roms I tried
Just checking if you got it
sent from my acidhazard thrill
wayno140 said:
Just checking if you got it
sent from my acidhazard thrill
Click to expand...
Click to collapse
I did get it all working again with no problems the phone is back to exactly how I got it from the store now using the steps I said above
Hello everyone,
I installed custom ROM for the first time on my Galaxy fit , flashed with CM9 ICS for FIT with CWM 5.0.2.
Installed CWM by Odin.
It worked fine. Then I tried Creed v4 ROM and wiped cache and data from CWM.
The ROM was giving problems so I wanted to revert back to CM9 so flashed again with CM9 but this time
when I tried to wipe data , it freezed on formatting data.
I tried to revert to stock Rom with Odin and this is now happening with the Stock 2.3.4 ROM too.
CWM cannot wipe data , Is my partition corrupted?
I cannot wipe data partition and All Roms freeze on Boot animation.
Pls help , I am tired of flashing again and again...
Is there any other way to do this.
I am using Stock XWKQ2 for 5670 on samsdroid.com
not every stock from writes the data partition try a Odin flashable rom which writes /data partition may resolve the problem
dheeraj (dhlalit11) said:
not every stock from writes the data partition try a Odin flashable rom which writes /data partition may resolve the problem
Click to expand...
Click to collapse
Thanks for the reply ,
I have used two stock roms for the phone and flash them from Odin.
S5670XWKQ2.tar
I'll use DDKT2 and come back.
Is there any way to repair the data partition?
single tar will not work use the four package file but still its not 100% sure to help
dheeraj (dhlalit11) said:
single tar will not work use the four package file but still its not 100% sure to help
Click to expand...
Click to collapse
Thanks dheeraj,
it worked
Used a european ROM multiple packages and its working now.
glad to read that
I am using Smil bean 3.1 based on CM 10 Alpha 4, Kernel- 2.6.35.7. after installing is i've replaced the file /system/build.prop after seeing the post -
http://forum.xda-developers.com/showthread.php?t=1933837.
After that I have lost the Exchange, after rebooting need a lot of time to get the network signal, sometime got black booting screen. But the main prob is i can't flash any other rom. Tried few time properly (resetting user data, formatting cash, formate dlvk cash. after installing is shows E:unknown volume/cash not found or cash no mount, no log ect and came back to old Slimbean,
Sow can i replace the old Build.prop?
AnYOne Help??
ghunpoka said:
I am using Smil bean 3.1 based on CM 10 Alpha 4, Kernel- 2.6.35.7. after installing is i've replaced the file /system/build.prop after seeing the post -
http://forum.xda-developers.com/showthread.php?t=1933837.
After that I have lost the Exchange, after rebooting need a lot of time to get the network signal, sometime got black booting screen. But the main prob is i can't flash any other rom. Tried few time properly (resetting user data, formatting cash, formate dlvk cash. after installing is shows E:unknown volume/cash not found or cash no mount, no log ect and came back to old Slimbean,
Sow can i replace the old Build.prop?
AnYOne Help??
Click to expand...
Click to collapse
From the main page of CM10 Alpha 4..if you have spent time reading it...
IMPORTANT! READ BEFORE FLASHING THIS RELEASE!
2. Once on this ROM, the most effective way of going back to any other ROM would be to repartition from Odin.
If you did not keep a copy of the original build.prop before you replaced it, you got nothing to go back to
yeah, the best way is to repartition and flash back to stock rom. after that, flash cfroot and then cm10 a4 first. when you have finished flashing cm10 a4, that is the time you can flash other roms based on cm10. hope i helped.
imboy25 said:
yeah, the best way is to repartition and flash back to stock rom. after that, flash cfroot and then cm10 a4 first. when you have finished flashing cm10 a4, that is the time you can flash other roms based on cm10. hope i helped.
Click to expand...
Click to collapse
I have been trying to re-partition by Odin and go back to stock rom 2.3.6 DDLF, but Odin can't re-partition it. 1st time it flashed the stock rom but stacked on boot loop. I've even tried to data reset on recovery mood but its show- "E: format_volume: rfs format failed on /dev /block / stl10
Could not understand what to do
ghunpoka said:
I have been trying to re-partition by Odin and go back to stock rom 2.3.6 DDLF, but Odin can't re-partition it. 1st time it flashed the stock rom but stacked on boot loop. I've even tried to data reset on recovery mood but its show- "E: format_volume: rfs format failed on /dev /block / stl10
Could not understand what to do
Click to expand...
Click to collapse
Have you tried flashing first KPE stock rom (with pit, pda, modem, csc files)? If not, try flashing it first and then upgrade to LF2.
Sent from my GT-I9003 using xda app-developers app
I have CWM 5.0.2.7. I want to upgrade from 2.3.6 Gingerbread to Android 4(PACMAN ROM preferred). I tried at least 50 - 75 times flashing >5 different ROMS, almost once bricked my phone... I found stable Gingerbread 2.3.6 and I am using it right now. I really want to upgrade to version 4, because I develop apps in Buzztouch and they will now support Android devices with Honeycomb or later. My question now is: how can I really upgrade to Android 4, because every ROM I flash is stuck at the first boot. Any help?
There is absolutely zero possibility of bricking your phone in flashing custom ROMs unless you do it in a wrong way (flashing other phone's ROM ). Same thing goes for bootloop. Wipe data,cache, dalvik cache and even format /system before flashing and also do wipes after flash. This way u can view a new dimension to the android world
swat4samp said:
There is absolutely zero possibility of bricking your phone in flashing custom ROMs unless you do it in a wrong way (flashing other phone's ROM ). Same thing goes for bootloop. Wipe data,cache, dalvik cache and even format /system before flashing and also do wipes after flash. This way u can view a new dimension to the android world
Click to expand...
Click to collapse
I already knew everything you said, even more, but thanks for idea of formatting /system. Maybe that is the main problem. Thank you so much!
UPDATE! Nothing is working. I think I will give up on ROMing.
Lol which baseband are u on? Try to flash latest stock rom ie DXKT7 and then flash a custom rom.
swat4samp said:
Lol which baseband are u on? Try to flash latest stock rom ie DXKT7 and then flash a custom rom.
Click to expand...
Click to collapse
I cannot find any with DXKT7 baseband. I am on XWKTI.
I got the same problem. Flashing from stock 2.3.6 XWKTI to any other cm 10.1 rom is not working. Clearing caches etc. does not help.
Any solution to this?
The latest rom I tried is cm-10.1-20130907-NIGHTLY-beni.zip. No luck so far.
What is wrong here?
Solved. I used the wrong CWM. beni_cwm-5_ext4_v2.tar does the trick.
Junnix said:
Solved. I used the wrong CWM. beni_cwm-5_ext4_v2.tar does the trick.
Click to expand...
Click to collapse
How did you solve the problem?
AleksaSavic said:
How did you solve the problem?
Click to expand...
Click to collapse
Did u ever successfully used ny custom rom b4.. or is this ur 1st chance...??
AleksaSavic said:
How did you solve the problem?
Click to expand...
Click to collapse
The CWM you use might be a one which is not working. At least I used a CWM 5.0.2.7. But it was rfs which is not compatible with the S5670.
So install CWM beni_cwm-5_ext4_v2.tar and you will be able to install any custom rom without problem.
Junnix said:
The CWM you use might be a one which is not working. At least I used a CWM 5.0.2.7. But it was rfs which is not compatible with the S5670.
So install CWM beni_cwm-5_ext4_v2.tar and you will be able to install any custom rom without problem.
Click to expand...
Click to collapse
It is this:
http://forum.xda-developers.com/showthread.php?t=1339640
BRO F U WANT TO UPDATE TO 4.+ THEN FOLLOW THESE STEPS
BOOT TO RECOVERY
WIPE DATA
WIPE CACHE
ADVANCE>>WIPE DALVIK CACHE
MOUNTS AND STORAGE>>FORMAT SYSTEM
INSTALL THE ROM U WANT
WIPE DATA
WIPE CACHE
REBOOT
WAIT FOR 5-10 MINS AS IT TAKS TIME FOR FIRST BOOT
STILL NOT HAPPENING
THEN UR DOWNLOADED FILE MUST BE CORRUPTED SO DOWNLOAD THE FILE AGAIN
Galaxy_Rohit said:
Did u ever successfully used ny custom rom b4.. or is this ur 1st chance...??
Click to expand...
Click to collapse
Flashed custom ROMs at least 75 times. I am not a newbie.
Junnix said:
The CWM you use might be a one which is not working. At least I used a CWM 5.0.2.7. But it was rfs which is not compatible with the S5670.
So install CWM beni_cwm-5_ext4_v2.tar and you will be able to install any custom rom without problem.
Click to expand...
Click to collapse
I already have CWM 5.0.2.7. Can I install it again via Odin or not?
ZmisiS said:
It is this:
http://forum.xda-developers.com/showthread.php?t=1339640
Click to expand...
Click to collapse
I flashed that already(I think).
vinayaksuresh said:
BRO F U WANT TO UPDATE TO 4.+ THEN FOLLOW THESE STEPS
BOOT TO RECOVERY
WIPE DATA
WIPE CACHE
ADVANCE>>WIPE DALVIK CACHE
MOUNTS AND STORAGE>>FORMAT SYSTEM
INSTALL THE ROM U WANT
WIPE DATA
WIPE CACHE
REBOOT
WAIT FOR 5-10 MINS AS IT TAKS TIME FOR FIRST BOOT
STILL NOT HAPPENING
THEN UR DOWNLOADED FILE MUST BE CORRUPTED SO DOWNLOAD THE FILE AGAIN
Click to expand...
Click to collapse
/system - ext4
/data - rfs
/cache - rfs
/db-data - unknown
I am using this apk:
CF-Root-ext4-v1.3-Addon.apk from Chainfire, but it is not made for my phone.
It has options for converting ext4 to rfs and rfs to ext4, but I am scared to do that. How can I manually convert from rfs to ext4? And, will my system even boot after doing that?
Possible solution...
Hi,
I have successfully flashed cm-10.1-20130914-NIGHTLY-beni.zip using ClockWorkMod 6.0.2.7. I initially had problems getting cm 10.1 to boot, it would just stop at the cyanogenmod logo. I got this ROM to work by first flashing ╰☆╮ [ROM][CM7.2] JellyBread v5.0 | SURPRISE! UPLOAD COMPLETE! ╰☆╮. then flashing the nightly.
Good luck:fingers-crossed:.
Regards,
jemail
I wouldn't recommend installing ICS on a Galaxy Fit. The phone doesn't really stand that much of the ROM itself.. I use a rom that'll look exactly alike it, that's basically it. But I tried Lenio vQuattro. it seemed pretty nice If you really need to then try this rom. And it wouldn't be such a bad idea tp update CWM, or try another Recovery.
AleksaSavic said:
/system - ext4
/data - rfs
/cache - rfs
/db-data - unknown
I am using this apk:
CF-Root-ext4-v1.3-Addon.apk from Chainfire, but it is not made for my phone.
It has options for converting ext4 to rfs and rfs to ext4, but I am scared to do that. How can I manually convert from rfs to ext4? And, will my system even boot after doing that?
Click to expand...
Click to collapse
Good question.
I really got no answere to that question. But as far as I know there are CMW for rfs and for ext4/ext3 filesystems.
If you use the wrong CMW than the phone will hang in a boot loop after flashing. That's what I had.
So I suggest you should try different CMW. For rfs and ext4. Better to flash them with Odin. I used Odin_Multi_Downloader_v4.42.exe.
As CWM try: http://forum.xda-developers.com/showpost.php?p=24719114&postcount=1387 or this CWM http://androidlegend.com/dl/beni_cwm-5_ext4_v2.tar
One of these should work for you.