Related
Information
EXPERIMENTAL ROMS FOR TESTING, NOT RECOMMENDED FOR DAILY USE!
Android 2.2.1 (Froyo) ROM for Huawei 8120 aka Vodafone 845
Based on Tas0s's CM6 Port
Android 2.2.1
Kernel 2.6.29 (Kalt Kaffe)
CyanogenMod 6.2
De-odexed
Busybox
Bash
Zipaligned
Rooted
633MHz OC kernel
JIT Enabled
Fixed Google account sync/login problem
HVGA Market v2.34
Go Launcher EX (the faster Launcher with a lot of extras)
Default mms.apk replaced with Go SMS
Default browser.apk replaced with Skyfire (you can remove)
Documents To Go v3.0002
Java ME Apps support
Only Root Explorer added for file managing (be careful)
Stopwatch app included
Working:
RIL
Audio - Volume not the best, try to fix with DSP Manager
Bluetooth
Wifi
Calibration - Recommended to use it with a pen/stick
Bugs/Not working:
Camera
SDCard mount on PC - Need to use card readed till this not fixed
Key lights
Missing aGPS
Missing FM Radio image
Ext2 filesystem on SD Card not supported
Installation
1. Flash a recovery image (tested with AmonRA and ClockworkMod too)
Method #1
2.a Copy the .zip file to your MicroSD card and boot the phone into recovery mode (call+volume-up+power)
Method #2
2.b Put device in recovery mode and start msusb and with adb or adb-windows
-----adb shell mount /sdcard/
-----adb push romFILE.zip /sdcard/
This method allways pushed properly onto sdcard no read errors
3. Choose "Flash zip from sdcard" and choose the zip you just copied.
4. Wipe data+cache before rebooting if it the first install of this ROM. When upgrading with future updates you propably won't need to wipe again.
OR
Install Superboot (via Windows PC)
Download Superboot: DOWNLOAD (MediaFire) / MIRROR (ROMraid / CoBlitz) and extract to a directory
Enter recovery mode by turning your device on while holding down 'volume down' and 'End call' (red) then powering on your device.
Note: The hourglass (zandloper) stays on the home screen
WINDOWS - double click 'superboot-windows.bat'
Phone will startup, seems to hang and eventually reboots itself.
Root the V845 (via Windows PC)
Download AmonRA Recovery 1.6.2: DOWNLOAD (MediaFire Pro) / MIRROR (CoBlitz / ROMraid) and extract the zip file
Enter recovery mode by turning your device on while holding down 'volume down' and 'End call' (red) then powering on your device.
Note: The hourglass (zandloper) stays on the home screen
WINDOWS PC - (ensure the V845 is connected via USB) double click 'install-recovery-windows.bat'
then run in cmd
fastboot-windows.exe reboot
or
Remove battery and start phone (not sure how to do this otherwise)
FIRST MAKE NAND BACKUP IN RECOVERY - Power + Volume Up + Call
WIPE RECOMMENDED!
DOWNLOAD LINKS:
FroyoBit v1.95 (CM6) - Not tested!!!
FroyoBit v1.8 (CM6)
FroyoBit v1.6.06 (AOSP)
FroyoBit 1.42 (based on Anryl's Froyo ROM R20.2)
Default Black clock color on notibar
Recommended White clock color on notibar - not tested
Original vodafone 845 ROM downloads:
Original Vodafone ROM
Original Vodafone Recovery
UPDATES:
v1.0 - Initial release
v1.42 - Last and best release on Anryl 20.2 base (bad calibration, dpad not working 2.6.32 kernel, 710MHz OC)
v1.6.06 - First & last AOSP based release (Android 2.2.2, 2.6.29 kernel, 710MHz OC, SD Card not mount on PC, No Camera, No radio, broken dialer layout, bad sensors)
v1.7 - First CM 6.2 based release, not recommended to use
v1.8
- Fixed dialer and contact list layout
- Fixed Desktopclock app layout
- Added gallery app
- Added Zeam Launcher, removed ADW
- Several app updates
v1.9
- Zeam changed to Go Launcher EX
- Mms.apk removed, added Go SMS
- Removed Advanced Task Killer (Go Launcher got built-in Task Killer)
- Added ROM Manager (Recommended to use ClockWorkMod Recovery - Attached in first post)
- Market updated to 2.34
- Removed LatinIME (built in keyboard, now you can Install and use any other what you want)
- Added Smart Keyboard Pro
- Removed CarHome
- Added Smooth Iris Theme
kuci06 said:
awesome!
I see that you are trying to integrate the honeycomb player, which would be cool, but... wouldn't that require some kind of 3D acceleration? (like the 3DGallery app, which is kinda slow on this phone)
(also, if we are talking about "honeycombing" the phone...some more honeycomb stuff that could get ported to 240*320)
honeycomb-style locksreen
honeycomb boot anim
Click to expand...
Click to collapse
Thx I will check what can I do, 3D Gallery was slower on 2.1, now much better, but not the best
Hi Bitye,
This ROM looks very promising, looks like you are integrating some great components, I will keep an eye on this and test once the screen issues and D-pad issues are resolved. In the mean time do you think you could put some screenshots or a video link up for us to have a look?
Cheers
H3pha3stus
H3pha3stus said:
Hi Bitye,
This ROM looks very promising, looks like you are integrating some great components, I will keep an eye on this and test once the screen issues and D-pad issues are resolved. In the mean time do you think you could put some screenshots or a video link up for us to have a look?
Cheers
H3pha3stus
Click to expand...
Click to collapse
i will upload some screens later, now I am at work.
Hajrá, eddig ez a legjobban működő ROM!
i can regular install this rom, and reboot after install. Then we know it comes the setup wizard. Well done, after some steps if I touch forward before setup complete, it comes an error message. After them the screen keeps black. What to do??? I think this rom is still buggy
martin_nolimit said:
i can regular install this rom, and reboot after install. Then we know it comes the setup wizard. Well done, after some steps if I touch forward before setup complete, it comes an error message. After them the screen keeps black. What to do??? I think this rom is still buggy
Click to expand...
Click to collapse
I think this will be Zeam configuration problem, I working on it will be fixed in 1.4 today. I am at work as always now, after 8:00 PM CET.
hi bitye, your roms is very fantastic, but ihave a problem, this problem is enter number on dialpad but not search in phonebook
engenek said:
hi bitye, your roms is very fantastic, but ihave a problem, this problem is enter number on dialpad but not search in phonebook
Click to expand...
Click to collapse
Ok, I will change the dialer app too.
Nice you are making a ROM too but the problem with all roms is that they all got the same bugs but tas0s said he fixed it!
i hope you will fix the bugs too...
cedric123 said:
Nice you are making a ROM too but the problem with all roms is that they all got the same bugs but tas0s said he fixed it!
i hope you will fix the bugs too...
Click to expand...
Click to collapse
I think he only fixed the wifi and finished his GIT, will check when share something, I make a quick fix for my as 1.4 than start to check the framework. I tried the final wifi fix too, but on-Phone permission changes worked for me, compiled not :S
bitye said:
I think he only fixed the wifi and finished his GIT, will check when share something, I make a quick fix for my as 1.4 than start to check the framework. I tried the final wifi fix too, but on-Phone permission changes worked for me, compiled not :S
Click to expand...
Click to collapse
Can you make a zip for fixing the permission or a guide how to do this?
cedric123 said:
Can you make a zip for fixing the permission or a guide how to do this?
Click to expand...
Click to collapse
Tas0s shared a link what have to be enought for fix I think,
http://forum.xda-developers.com/showpost.php?p=11748559&postcount=223
I tired, but start to check it If ok I will share if somebody not finish before me
1.42 released
Now I am going to try Tas0s repo, next time will release on new kernel, if camera fixable
I tried your rom, but I get the "The application Setup Wizard (process com.android.setupwizard) has stopped unexpectedly. Please try again" error that I have to press force close a few times to get rid of right after the Google sign in process. I did wipe factory reset, but it doesn't help. Have you got any idea?
Jocco said:
I tried your rom, but I get the "The application Setup Wizard (process com.android.setupwizard) has stopped unexpectedly. Please try again" error that I have to press force close a few times to get rid of right after the Google sign in process. I did wipe factory reset, but it doesn't help. Have you got any idea?
Click to expand...
Click to collapse
I haven't got problems like this, and always do full wipe and try the ROM before upload it, but I try to check that apk.
++ Installed on my friends phone w/o any problems
Szia!
Nagyon jó a romod "1.42". Wifi nek kell néha restart de jó, GPS jó , bluetooth jó, telefon jó , taskbár jó, böngészőt kellett újrarakni azóta jó.
Szerintem Király vagy.
Sorry for my bad english!
Wifi goood sometimes need restart, GPS good, Bluetooth good, taskbar good,
browser need reinstall good. This room very goood! Gratulation!!
Did I understand good,D-pad and optical butons are disabled?????
kuci06 said:
disabled, because it causes freezing
Click to expand...
Click to collapse
Will be fixed in AOSP based version
introducing first custom rom
for alcatel ot-908 android 2.2
[ disclaimer ]
do not flash roms not intended
to be made for your phone !
these roms can damage your hardware !
Click to expand...
Click to collapse
[ requirements ]
this custom rom will work for any alcatel ot-908 phone
or branded one cosmote/globul/t-mobile/orange move
for OT908 s/f/a read post # 7 to solve sensor-keys problem
also must have cwm recovery installed
if neither phone is rooted nor you have cwm recovery then read post #7
Click to expand...
Click to collapse
[ features ]
based on alcatel stock rom 2.2.2 android
zipaligned
removed stock apps- 0 bloatware
changed browser homepage (google.com)
updated market/ maps/ youtube
add busybox/ root explorer /terminal emulator/bash
removed stock-based/ add new splashscreen/ bootanimation/screen locker
replaced stock launcher /adw.launcher/ Regina
add root/ cwm recovery
add /data/app feature
add /etc/init.d scripting support
add a2sd - thanks to The Darktremor
moved dalvik-cache to get free space
improve gps accuracy
modded status bar
add reboot/recovery/fastboot to Power Menu
system tweaks
undervolting/ overclocking
Click to expand...
Click to collapse
[ language support ]
English
Romanian
German
Spanish
French
Italian
Hungarian
Dutch
Turkish
Portuguese
Czech
Bulgarian
Polish
Slovak
Croatian
if not on list read this
Click to expand...
Click to collapse
[installation | download ]
read post #136
DOWNLOAD Move_v4.0 (September 11, 2012)
-for OT908 SFA flash this ROM then read post #5 to change keys
-to sync with Desktop you can use :
Wondershare MobileGo (take screenshots)
MyPhoneExplorer (you can control phone from PC)
QtADB (advanced)
Click to expand...
Click to collapse
Thank you, I'm downloading right now from Box
On my 908F this rom work without any problems
But the touch buttons changed their places...
Keyboard is not showing up. Did you forgot something?
I changed input language to Romanian and now it's working.
--------------------------------------------------------
So, I successfully installed your ROM. I also installed Apps2SD provided in archive, by following your instructions. All went good
OT-908 SFA key mapping
grigor1993 said:
On my 908F this rom work without any problems
But the touch buttons changed their places...
Click to expand...
Click to collapse
yes I know just that problem I'm talking in post #1
in your case to solve sensor buttons problem use this file in attachment
1.extract and copy to sdcard
2.enter Terminal Emulator already installed on phone
3 write these lines
Code:
#su
#cp /mnt/sdcard/isdm_KeypadLayout.kl /custpack/usr/keylayout/isdm_KeypadLayout.kl
#reboot
do not use Root Explorer to copy !
this is the hard-way to solve problem
if you like the easy-way flash keys.SFA.zip by CWM recovery
bgm92 said:
Keyboard is not showing up. Did you forgot something?
I changed input language to Romanian and now it's working.
--------------------------------------------------------
So, I successfully installed your ROM. I also installed Apps2SD provided in archive, by following your instructions. All went good
Click to expand...
Click to collapse
yes this is true but not a problem will happen every time you flash again
due to apk optimization I made but after system will construct Dalvik-cache will never happen !
but not necessary to change language just try to activate keyboard by example try to write a sms if keyboard has no response press back out of sms app and enter to try again...
regarding a2sd I used to move Dalvik-cache to get more space to apks
by example compared to stock Cosmote ROM you got 150-105= 45 MB free
if you want to experiment with a2sd use this help
but carefully !
how to flash CWM recovery
-install SDK for Android
-copy recovery.img to location where you stored sdk tools something like this android-sdk\platform-tools
-enter fastboot mode (phone is connected to PC )
to enter fastboot mode press VolDOWN+Menu at phone startup for 10s phone display is blank
-enter this from line commander (bash/cmd.exe)
fastboot devices -to start service or test connection to PC
fastboot flash recovery recovery.img -to flash required CWM recovery to phone
to enter CWM recovery press VolUP+Menu for 10s at phone start
This is how I installed CWM
bgm92 said:
This is how I installed CWM
Click to expand...
Click to collapse
I made this regarding post #1 for people who are newbies in Android to help install this custom ROM
also I think fastboot is the strongest tool for Android because will help to solve a lot of problems!
in Windows Mobile this is a tricky task to recover from an unsuccessful flash !
google translator
hello, I installed this rom that you did install without problems, the phone works fast, touch screen sometimes does not work pressing 3-4 times and did not respond after a while I try works.
why it takes so long to load before having it loaded faster, with no load and no keyboard out how to log into your account
do not take this as a criticism to note that the problems I notice you are done great.
mate pls make black status bar....
hotrider said:
google translator
hello, I installed this rom that you did install without problems, the phone works fast, touch screen sometimes does not work pressing 3-4 times and did not respond after a while I try works.
why it takes so long to load before having it loaded faster, with no load and no keyboard out how to log into your account
do not take this as a criticism to note that the problems I notice you are done great.
Click to expand...
Click to collapse
read post #6
if this post isn't helpful for you try to install another keyboard from Market by ex search for hacker's keyboard
but for me post no 6 is the most appropriate answer to that question
by example for me keyboard works pretty well
I'm expecting feedback message !
black status bar
sfuportuguese said:
mate pls make black status bar....
Click to expand...
Click to collapse
I'm thinking...
If you can't wait read this
i'm noob for this things
but this framework sucks...
u must somehow import png-s
icons in settings and status bar are "must be" solved...
lock screen too
PS: finaly can change notification sound...
black status bar
sfuportuguese said:
i'm noob for this things
but this framework sucks...
u must somehow import png-s
icons in settings and status bar are "must be" solved...
lock screen too
PS: finaly can change notification sound...
Click to expand...
Click to collapse
ok
I will change status bar to black color in next version
regarding lock screen already have plans...but not very easy to do that
try to import framework from x10mini custom roms...
think that for qvga custom roms, for x10mini had gone most furder...
PS: must edit look of "phone app" it's terible...
PS: i have bug on lock screen
slide on "phone" opens emergency call
I fixed a keyboard got rоm in the original phone which foot to Cyrillic and now with the installation and install it.
problem with touch screen remains in most cases not responding to touch, sometimes works sometimes not.
sfuportuguese said:
try to import framework from x10mini custom roms...
think that for qvga custom roms, for x10mini had gone most furder...
PS: must edit look of "phone app" it's terible...
PS: i have bug on lock screen
slide on "phone" opens emergency call
Click to expand...
Click to collapse
this is not a bug just about settings... I CAN NOT make a custom rom for every person asking for ...you have to use Prop Editor app included but be careful ! If you want to customize install some themes ... there are a lot of themes for ADW.Launcher and this is very very customizable... in fact it's the same launcher as Cyanogenmod also you have Go Launcher on Market at one click install ...
to import framework from Xperia good thinking if you have 1 year time at your own discretion...
or if someone is paid to do that
...
this is my custom ROM ..so made to use by me and posted here if someone is interested.. if not ...you are free to use any other ROM !
also
to see features included in this ROM ... read post no 1 before install you see nothing about 'beautiful interface' just performance/stability/ MORE free space/ and....
a lot of features... BUT YOU HAVE TO LEARN how to use these things...
In your case I suggest to revert back to your stock ROM if you don't like this one
Best Regards,
hotrider said:
I fixed a keyboard got rоm in the original phone which foot to Cyrillic and now with the installation and install it.
problem with touch screen remains in most cases not responding to touch, sometimes works sometimes not.
Click to expand...
Click to collapse
problem with touchscreen anyway mine works well
revert back to stock rom to see differences but I suppose is not a problem anyway I really don't have this problem. I'm expecting feedback from other persons to see what is this about ?
regarding keyboard not showing up ... as some people say... it is as done in the next version I put a new keyboard in fact as I see all Android phones on market have 2 keyboards installed -mine just one !
maybe default Android keyboard needs help from third party to wake up from sleeping
to check this ...install another keyboard from Market by example look for haker's keyboard
but I think this also could be about deodexing/ zipalinging features on this ROM
If is so then during the second launch every app should start well - so is about keyboard
Best Regards ,
u understud me wrong, i'm very thankfull...
u done great job, but i'm every day in contact with some serious gadgets ...
so when I SEE THIS LOCK SCREEN AND PHONE APP AND STATUS BAR.... I get mad...
Hi, i got a prestigio multipad 5080 pro, i rooted my device and everything was fine until i changed the DPI of my device in order to play dead space. Now my device keeps says "unfortunately, launcher has stopped" on a loop is there any way to fix this? i have tried factory reset and it did nothing.
Thanks.
a good rom and stable so far.
download from here
http: // x--t-e-a-m. blogspot. it/ and click on Download:
XTeam 4.1 QUI
plus for setting your external sd as a nand *as a main installing card... use this http :// crewrktablets. arctablet. com/?wpfb_dl=330
use google translate cause its italian website...anyway ...
steps are easy ... unrar XTeam 4.1 ...
1) Turn off your device
2) Locate the folder Rockusb_driver in the XTeam 4.1 folder and install the drivers for your computer.
3) on the tablet Hold sounds Down Button and connect the device.
4) open with right click and run as administrator the rk29update.exe
5) press the button "formatta!!!"
6) tick the "Loader"
7) Download this kernel from here: http: // www .2shared. com/file/GmdSyNG1/kernel_for_pmp_5080cpro_with_o.html
 replace the kernel with the one that i gave you from the link
9) press the "Aggiorna! ! " button and wait until the program overwrite the new firmware
10)when the tablet reboot it will go through cwm and the install the
Oma CM10 ExtSD To NAND OTG Fix.
11) the new firmware have OTA updater so update your tablet until you have no other updates...(i realised that i had to download the updates from ota and install them manual but anyway...)
12) in one point the updates from ota updater will change your kernel but dont worry.you will just lose temporary the screen rotation so...
install all the updates and in the end run the rk29update.exe again untick all the things there and keep only the kernel ticked and use the kernel i gave you.that match with your 5080 cpro. this time dont push formatta !!!.
Just overwrite the kernel and click aggiorna! !
your device will restart and ta da !!! you have the latest firmware for your Prestigio 5080 C PRO. overclocked and rooted with 1 giga for apps
plus 2x faster than factory's firmware.
i wanna say a big thanx to OMA for the kernel http: //crewrktablets. arctablet. com/
a big thanx to X TEAM for this awesome firmware
and a huge thanx to my self that i had the patience to search for the specific model what to do. It took me about 2 days to gather all the informations i needed.
And a huge apologize to oma that i didnt use his JB version for the prestigio tablet but i test it and it was kinda slow and laggy for my tablet xD
ps: in case that u need more info i ll be around to help you
Remember the steps are only for Prestigio PMP 5080 C PRO and NOT for the Prestigio 5080B.
For the Prestigio 5080B you must find the specific Kernel that works on the device cause else you will have problem with the ROTATION
Sent from my Xteam Smartpad 810c using Tapatalk HD
[ROM][PORT]JB 4.1.2 FOR ZTE v970M [13.04.2014]
Hello friends.
First thing first: i'm not a true developer; just someone who tries to do something for my own and then decided to share with the community
Here i present a jb4.1.2 rom for ZTE v970m ported from jiayu g3.
Rom Features are:
Solo Launcher 1.6.4 is base launcher
Multi-language...
Lockscreen widget -u may turn off screen simply touchin' it-
Wake up with volume keys -along with the lock screen widget you don't have to use power button any more!-
Xposed Framework and Gravitybox included
gapps included
Added Mtk 6577 Governor Switcher
Added Equalizer to boost volume
Internal sdcard removed, bruno's repartition for internal memory applied
etc...
Known Bugs:
After booting, "the phone" gives fc info but in fact there is no problem...
move to sdcard buggy -fixed with the patch-
notification led problem - fixed with the @superdragonpt's new kernel v1.2
IMPORTANT NOTE:
No kernel is included in the rom you should flash a kernel immedately after flashing the rom...
I strongly recommend you to flash @superdragonpt 's kernel: http://forum.xda-developers.com/devdb/project/dl/?id=6130
Download and flash thru recovery KERNEL_JB4.1_ZTE_v970._v1.2.zip
Thanks:
@bgcngm ; for extended userdata script,
@superdragonpt ; for his kernel and efforts for our device,
@gabor for the jiayu g3 rom
@mngO DEV for the base rom
DOWNLOAD SECTION:
Download rom from mediafire: http://www.mediafire.com/download/dbpyon3dyxd4imq/V970M.JB4.1.2.18.04.2014.zip
Download @superdragonpt's custom kernel from here: http://forum.xda-developers.com/devdb/project/dl/?id=6130
patch to fix for moving apps to sdcard: http://www.mediafire.com/download/vktyq3q3t7m7b7d/sdcard_fix.zip
Flashing Instructions:
Use cwm or twrp recovery
wipe data/factory reset
wipe cache
flash V970M.JB4.1.2.18.04.2014.zip
flash KERNEL_JB4.1_ZTE_v970._v1.2.zip
flash sdcard_fix.zip
Reboot & enjoy...
nadiren said:
DOWNLOAD SECTION:
Download from mediafire: http://www.mediafire.com/download/dbpyon3dyxd4imq/V970M.JB4.1.2.18.04.2014.zip
Flashing Instructions:
Use cwm or twrp recovery
wipe data/factory reset
wipe cache
flash V970M.JB4.1.2.18.04.2014.zip
flash KERNEL_JB4.1.x_ZTE_v970._Stable1.0.zip
Reboot & enjoy...
Click to expand...
Click to collapse
Good rom but i think i`m missing something when i plug in to pc only charge and don`t ask me if i want to connect in mode to copy files from pc to phone (sorry i`m missing that word don`t now verry well english hope u understand) , and i don`t have lockscreen (pattern/slide)
Edit : don`t show any notification in taskbar !! i have dual-sim version.
Best regards
testing
gigel87 said:
Good rom but i think i`m missing something when i plug in to pc only charge and don`t ask me if i want to connect in mode to copy files from pc to phone (sorry i`m missing that word don`t now verry well english hope u understand) , and i don`t have lockscreen (pattern/slide)
Edit : don`t show any notification in taskbar !! i have dual-sim version.
Best regards
Click to expand...
Click to collapse
There is no problem in connecting pc, it just doesnt ask but u can easily apply it from the notification bar
For the lockscreen pattern it is under system/security section, here is my pattern:
nadiren said:
There is no problem in connecting pc, it just doesnt ask but u can easily apply it from the notification bar
For the lockscreen pattern it is under system/security section, here is my pattern:
Click to expand...
Click to collapse
If i go in settings / security i see default it is SLIDE , push power button wait few seconds hit power button again and no lockscreen , go again in security choose pattern setting pattern hit power button , wait again , hit again and nothing its going to main screen (or where it was) , this is my dilema what i`m doing wrong ? , don`t want the pattern only the clasic lockscreen and yes i know i can go to store and download some app for lockscreen but sometimes its not working good (lag etc..)
gigel87 said:
If i go in settings / security i see default it is SLIDE , push power button wait few seconds hit power button again and no lockscreen , go again in security choose pattern setting pattern hit power button , wait again , hit again and nothing its going to main screen (or where it was) , this is my dilema what i`m doing wrong ? , don`t want the pattern only the clasic lockscreen and yes i know i can go to store and download some app for lockscreen but sometimes its not working good (lag etc..)
Click to expand...
Click to collapse
i really don't understand what your problem is?!? as it can be seen in the screenshot the "pattern" works flawlessly for me?! did you follow the flashing instructions?
nadiren said:
i really don't understand what your problem is?!? as it can be seen in the screenshot the "pattern" works flawlessly for me?! did you follow the flashing instructions?
Click to expand...
Click to collapse
I I know how to flash just it not have lockscreen when u push power button it goes to sleep , and if want to wake up the device first it shows lockscreen like this (look at the atach) , on mine it doesn`t ... when i wake up the phone only show directly the main screen .... if u don`t understand i`m not bother again sorry maybe next time tnx again for your support :good: and sorry to be such a ....
gigel87 said:
I I know how to flash just it not have lockscreen when u push power button it goes to sleep , and if want to wake up the device first it shows lockscreen like this (look at the atach) , on mine it doesn`t ... when i wake up the phone only show directly the main screen .... if u don`t understand i`m not bother again sorry maybe next time tnx again for your support :good: and sorry to be such a ....
Click to expand...
Click to collapse
ok, i got the problem now .. first of all i'm not angry with u nor i've offended your questions; just didn't get the your problem before. as i said i had no problem with lockscreen as you see from the screenshots; did you happen to choose "none" instead of "slide" or "pattern" in any case?!?
nadiren said:
ok, i got the problem now .. first of all i'm not angry with u nor i've offended your questions; just didn't get the your problem before. as i said i had no problem with lockscreen as you see from the screenshots; did you happen to choose "none" instead of "slide" or "pattern" in any case?!?
Click to expand...
Click to collapse
Yes but nothing happen i will try again tommorow
Nice
Keep it going, it's always nice to see new Roms for this device
Regards
moving apps to sdcard seems buggy
this patch corrects this bug also makes internal memory as 2.5gb...
apply from recovery without wiping data
thnx to @superdragonpt and his custom kernel, led notification bug is corrected; just flash the new custom kernel v1.2 thru recovery without wiping data/cache:
KERNEL_JB4.1_ZTE_v970._v1.2.zip : http://forum.xda-developers.com/devdb/project/dl/?id=6130
workin' on a new rom... testin' it...
it is again 4.1.2 based since 4.2.2 has that annoying pink camera bug.
it's a super slim jb 4.1.2 with sony bravia engine. rom is just 160 mb with slim gapps included!!
so far there is no bug, but i'll test it for a couple o' days more in order to be sure...
some screenshots attached...
for the last screenshot, it was taken while lenka's windows 8 song playing in the background. The sound level can be adjusted quite high in the rom!...
hi nadiren,
i want to try your rom for it's spesific to v970m ?
but the kernel link seem to be invalid, or i can't download it
it says: This download file is not currently available (it was deleted or disabled).
or may be i don't have the privilage yet ?
Opening ceremony
Hey There Again ...........
Introducing My New Rom : Next Is Now S6 Experience
Built V1
Based On Stock 4.2.2 Rom
Warnings :
1. You are now Void your Warrenty …….
2. Backup all your personal apps and important data to avoid loosing them …
3. Do all steps perfectly And carefully ……
4. I am not responsible for any mistake and Brick your phone ….
Features :
1. Fully Improvised User Interface Like New Samsung S6
2. Fully Deodexed Rom
3. Boaltware removed for better performance
4. Samsung S6 Boot Animation
5. Fly And Flip Framework Animation
6. Viper4android Included for batter Sound Quality
7. Custom Kernel Added With Lots Of Tweeks
8. Good Looking Wallpapers
9. Power Saving Mode Enabled
10. Added Flashlight Toggle on Statusbar
11. Auto Power off option Enabled in settings
12. All System Apps Are well themed Like S6
13. Rooted With Updated SuperSu
14. Xposed Module aded for Playing Big Size Games
15. Fx meterial Designed File explorer with Full version and can be used as a root explorer
16. All Apps ar updated With Updated Firmware
17. Lolipop Fonts Added
18. Graphics Optimizer tools added for better game playing
19. Nevigation Bar Added (Enable By Editing Build Prop Or using Gravity Box)
20. Zipaligned Rom for more Faster Usage
How To Install :
1. Download Zip file Of the Rom From Link Given Below
2. You must install the custom rom on Stock Rom
3. You Mast Have Clock Work Mode Recovery on your device.Letest CWM is Given In attachments ........
Tutorial : http://androiddeveloperstore.blogspot.in/2014/09/how-to-cwm-root-samsung-galaxy-s-duos-2.html
4. Copy the Next Is Now S6 Experience.zip toYour SD card
5. Turn off Your Phone And press Volume up button+home button+power at a same time
6. Aftar apearing CWM recovery go to install zip from sd card and install Next Is Now S6 Experience.zip file from sd card you downloaded before
7. Now reboot system and wait for approximately 5 minutes.(fix the root permission Xbin/su If you are asked)
9. Now you are good to use this rom ......
[If you want more toggles on notification bar then flash toggle+.zip given in attachments after setting up your Phn setup wizerd.Also do it after everytime you Reset your Phn]( Don't rearrange toggles you will loose flashlight toggle.)
Downloads :
http://www.4shared.com/zip/DDihlsLpce/Next_Is_Now_S6_Experience.html
Known Issue :
1. You cant set Wallpaper from Launcher, Go to settings To change walpapers ........
If more Bugs then Let me know ...........
Spacial Thanks To :
1. Jayedur Rahman [For Working with Me]
2. Yasin Arefin [For his amaizing Work on kernel]
3. Shanto [For Helping me Out]
Contact Me :
Only on WhatsApp +8801733371149
FB : https://www.facebook.com/shojol.ahmed.315
Hit the thanks button if you enjoy my work & give me feedback in replay…….
Sorry for my bad English……
Nice!
I'll try this bro thanks for the ROM
I installed your rom.. but the phone doesnt boot ... it always goes back to the recovery what should i do ????
hello
yabyuh22 said:
I'll try this bro thanks for the ROM
Click to expand...
Click to collapse
so u tried? any bug?
Very nice rom, i flash stock rom first, then instal CWM, and install this rom with CWM and everything is working fine No dialer bugs/force close or other bugs
some questions:
1) does the ROM support BT 4.0?
2) support for both sim Cards?
Thanks for answers.
BUGS
hey the rom looks good and every feature is good but i found some bugs, please solve:-IMPORTANT=IMP
1)After flashing this rom on stock rom i got red coloured {!} exclamatory on rebooting my phone.[IMP]
2)I dont have s-finder and quick connect buttons on my status bar as shown in ur screenshots.[IMP]
3)The phone force closes my games and switches off when i play a game above 50mb sometimes.(EVEN IF THE BATTERY IS 100%)[NOT IMP]
There were no other bugs according to me. The reason i need sfinder button is so that people recognize that i have s6 rom .
I DID EVERYTHING AS YOU SAID PLEASE SOLVE THESE BUGS AND DONT IGNORE
Thankyou in Advance......
No answers
bernard98 said:
hey the rom looks good and every feature is good but i found some bugs, please solve:-IMPORTANT=IMP
1)After flashing this rom on stock rom i got red coloured {!} exclamatory on rebooting my phone.[IMP]
2)I dont have s-finder and quick connect buttons on my status bar as shown in ur screenshots.[IMP]
3)The phone force closes my games and switches off when i play a game above 50mb sometimes.(EVEN IF THE BATTERY IS 100%)[NOT IMP]
There were no other bugs according to me. The reason i need sfinder button is so that people recognize that i have s6 rom .
I DID EVERYTHING AS YOU SAID PLEASE SOLVE THESE BUGS AND DONT IGNORE
Thankyou in Advance......
Click to expand...
Click to collapse
Common guys somone altleast provide a good answer for this. Please reply guys
bernard98 said:
Common guys somone altleast provide a good answer for this. Please reply guys
Click to expand...
Click to collapse
1. I think RED EXCLAMATION MARK is normal when you install custom recovery and custom rom.
2. The S-FINDER and QUICK CONNECT buttons is not you saw in screenshot.
That buttons you saw in screenshots is sim buttons (first sim and second sim), more precisely, name of the networks and only showing when you have 2 sims in mobile.
Just like in stock rom, look: http://s16.postimg.org/m65cyreqt/stock.jpg but only themed.
3. About the games, i don't know, i very rarely play games.
SDUOS2 said:
1. I think RED EXCLAMATION MARK is normal when you install custom recovery and custom rom.
2. The S-FINDER and QUICK CONNECT buttons is not you saw in screenshot.
That buttons you saw in screenshots is sim buttons (first sim and second sim), more precisely, name of the networks and only showing when you have 2 sims in mobile.
Just like in stock rom ( look : https://www.imageupload.co.uk/image/Z8QV ) but only themed.
3. About the games, i don't know, i very rarely play games.
Click to expand...
Click to collapse
Thankyou for replying.
Hey are there any bugs in this rom??
Please anyone who have flashed this rom reply to my msg
N almamun did u changed ur whatsapp number? ?
sapycool0 said:
Hey are there any bugs in this rom??
Please anyone who have flashed this rom reply to my msg
N almamun did u changed ur whatsapp number? ?
Click to expand...
Click to collapse
Hi there,
I have tried this ROM
My phone S duos 2 (India)
Base band version S7582DDUAMK1
Previously having Almamun Extreme lollipop, very very good rom except nasty, buggy and useless walkman player. So i tried this S6 rom.
Coming to this S6 rom and next version too, i followed all the steps and installed the rom.
Phone dialer pad, Music player, gallery crashes and are not getting opened showing error ''unfortunately stopped working''> flashed it very carefully but it shows the same message.
So i went to try Milktea rom. hmm.. but the developer is saying us to install fx, greenify, wanam exposed modular and all others.
So went with the ''Custom Rom For Samsung S Duos 2 GT S7582 Lolipop Extreme V2 (Updated 25/3/15)'' by Almamun,
very very good rom with original samsung music player (best i can say) and included all the above softwares in the rom itself
memory management, battery, calls, network,wifi bluetooth.. everything are working pretty fine.
All are working very good but you have to read all pages in that link and especially 3rd page ''Important'' message from developer before installing the rom.
yaay.. my 1st post in XDA.. cheers
Thanks,
Srinivas :good:
can i install on custom rom 4..4.4
Pls tell me can i? Sent from my s duos 2
Dear sir plz provide me cwm/twrp recovery for my gt-s7582, bcz prvs rvry i was installed, then my se is everytime satrt and restart again, then i did flash stock rom
IMEI Number not shown this OS
I like to install cm 12.1 on my samsung galaxy s duos 2. But after rooting my device in stock rom ( not installed custom yet) my battery drain faster. I have bought a new battery and it runs good for three months and problem repeated. So what happen when I install cm 12.1 and can i unroot GT-S7582. Is custom rom work after unroot.
porting
can you port this rom to android 6.0
I cant able to boot after installing this rom
everytime i got back to CWM RECOVERY WHAT TO DO NOW
sagarsaini234 said:
I cant able to boot after installing this rom
everytime i got back to CWM RECOVERY WHAT TO DO NOW
Click to expand...
Click to collapse
1-flash stock rom first if you are using custom rom
2-than flash this rom via cwm
done
hit thanks if i help you............!!!!!!:good:
nating for s7580 ? or this rom work in s7580 too