Related
Ok first of all, this is my dad's phone he wanted rooted with a custom ROM. I'm not new at all to flashing but I have the Droid X and Droid Bionic so I only know MOto. SO I performed the root (*****) and installed CM7 build on his Evo. A week later he was experiencing ploblems with gmail and GPS and not wanting to constantly hear complaining, I opted to install a new ROM that had an RC build . I chose Synergy with god mode (wanting to wipe it twice) and proceeded with the dalvik and cahce wipes only. I didn't format sys because the op didn't state that I had to.....well I left his house letting the ROM settle and now its in a bootloop. He's telling me via gtalk that it trys to come on but says "storage is full" and "android.acor" has stopped. Any solutions that I can give him to get him back up and running?
Did you nandroid...if so just restore that
Sent from my PC36100 using XDA App
You'll have to flash a new rom or restore a previous backup (if any was made).
jboyer0000 said:
Did you nandroid...if so just restore that
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
I made a CWM back-up but how do I get back into CWM recoovery to flash?
Theonew said:
You'll have to flash a new rom or restore a previous backup (if any was made).
Click to expand...
Click to collapse
How do I flash the new ROM? It's bootlooped and I have no idea how to get to his CWM recovery from a bootloop.
jkoldha said:
How do I flash the new ROM? It's bootlooped and I have no idea how to get to his CWM recovery from a bootloop.
Click to expand...
Click to collapse
Turn off the device, hold down the volume button and then the power button.
make sure you follow the 3 main steps before flashing/ restoring any rom or backup
1. wipe data/factory reset
2. wipe cache
3. go to advance->wipe dalvik
then proceed, and even though your motorola, it's the same through out all the phones
(have a photon and an evo3d)
A2CKilla said:
make sure you follow the 3 main steps before flashing/ restoring any rom or backup
1. wipe data/factory reset
2. wipe cache
3. go to advance->wipe dalvik
then proceed, and even though your motorola, it's the same through out all the phones
(have a photon and an evo3d)
Click to expand...
Click to collapse
Yea I should've data wiped but it said it would....
I always just restore to my previous rom the when I go to flash a new one I use amon ra recovery and wipe everything 3X before flashing.
Sent from my highspeed rooted Evo.
So I'm coming from Synergy Nightlies 73. Using TWRP2.2 I did the normal steps before loading a new ROM. ( Cache Wipe, Dalvik Wipe, System Wipe) Once I flashed the JellyWiz Beta 4 ROM the phone booted up just fine. However, it froze within a matter of seconds and I had no functionality. I pulled the battery a few times and each time the phone would freeze. I had to restore my previous ROM. Any ideas or has anyone had this problem? I really want to try out the new JellyWiz.
topd823 said:
So I'm coming from Synergy Nightlies 73. Using TWRP2.2 I did the normal steps before loading a new ROM. ( Cache Wipe, Dalvik Wipe, System Wipe) Once I flashed the JellyWiz Beta 4 ROM the phone booted up just fine. However, it froze within a matter of seconds and I had no functionality. I pulled the battery a few times and each time the phone would freeze. I had to restore my previous ROM. Any ideas or has anyone had this problem? I really want to try out the new JellyWiz.
Click to expand...
Click to collapse
try formatting system.
tu3218 said:
try formatting system.
Click to expand...
Click to collapse
1+
with cwm, it would be under mount and storage>format system/data/cache.
I don't use twrp but I'd think there's a similar option.
Also check md5 to make sure you have a good download.
Sent from a SYNERGIZED GalaxySIII
tu3218 said:
try formatting system.
Click to expand...
Click to collapse
I don't see that option(format system) anywhere. I went under wipe and wiped Cache, Dalvik, and System. I did try to select the Format Data but that option failed multiple times.
epagib said:
1+
with cwm, it would be under mount and storage>format system/data/cache.
Idont use twrp but I'd think there's a similar option
Also check md5 to make sure you have a good download.
Sent from a SYNERGIZED GalaxySIII
Click to expand...
Click to collapse
I've always used CWM without any problems until recently. It wasn't creating back up of my ROM. So I made the switch to TWRP which seems to work fine when loading other Synergy builds. I checked the MD5 and it was good. I may have to go back to CWM however, without a back up I'm afraid to flash anything.
topd823 said:
I've always used CWM without any problems until recently. It wasn't creating back up of my ROM. So I made the switch to TWRP which seems to work fine when loading other Synergy builds. I checked the MD5 and it was good. I may have to go back to CWM however, without a back up I'm afraid to flash anything.
Click to expand...
Click to collapse
Yeah, know what you mean about not having a backup. It always a hassel installing everything from scratch.
Have been using cwm 6012. Never had a problem making backups....or anything else.
But yes I'd try the system format along with clean wipe before installing Incubus beta4. I'm testing it right now too. Has few minor bugs, but overall very fast and slick
Sent from a SYNERGIZED GalaxySIII
epagib said:
Yeah, know what you mean about not having a backup. It always a hassel installing everything from scratch.
Have been using cwm 6012. Never had a problem making backups....or anything else.
But yes I'd try the system format along with clean wipe before installing Incubus beta4. I'm testing it right now too. Has few minor bugs, but overall very fast and slick
Sent from a SYNERGIZED GalaxySIII
Click to expand...
Click to collapse
So I went back to CWM Touch 5.8.4.9 everything worked like a charm. I was able to back up and install Incubus Beta 4. When I was using CWM I realized when you wipe data it says factory reset. Which is an option on TWRP in the wipe menu. So I believe that's what I was doing wrong. Operator error! Thanks for the the replies.
I haven't been able to get wifi tether to work on Beta 4. I'm going to search the forums for the solution. Just wondering if you've had an issue?
Over many iterations of Beanstalk my phone has had random reboots, sometimes hanging at the beanstalk logo, other times it will just freeze and i'll push the power button for screen on and nothing will happen. I'm trying to figure out if my hardware is flakey, anyone know an app for that? Or if maybe my installation procedure is the problem (it is posted below). I did a clean install of 1.205 yesterday and already 3 crashes. I wiped the dalvik and regular caches this morning after the 3rd crash to see if that may help. Any advice is appreciated. I dirty flashed 1.205 before and it didn't even seem this bad so not sure if it is completely random or what. Thanks!
Installation Procedure:
Flash Clean Wipe - Stock UCLB3
Factory Reset (Erase SD)
Flash Again w/ Bootloaders
Factory Reset (+Erase)
Flash Clean Wipe - Entropy Kernel
Factory Reset (Erase SD)
Copy CM9, Bean ROM, Gapps to SD Card
--CWM CM9--
Flash CM9
Reboot System (Do NOT use 'reboot recovery' in advanced)
System Hangs -> 3 Finger CWM Boot
Mounts -> Storage
Format system, data, cache
Flash CM9 again
Reboot
After boot -> Factory Reset (DO NOT erase SD)
--CWM--
wipe date/factory reset
wipe cache
advanced -> wipe dalvik cache
Install Beanstalk ROM
recovery reboots
auto resume install (if not flash zip again)
Install gapps
wipe cache
advanced -> wipe dalvik
After boot -> Factory Reset (Erase SD)
Also, I am not overclocking or undervolting, someone suggested that before so I turned it all off.
Sounds like your restoring apps and data with titanium backup or something. Are you? If so, that explains the reboots. I highly doubt it's the rom
Sent from my SGH-I997 using Tapatalk 2
eZdubzitmk4 said:
Sounds like your restoring apps and data with titanium backup or something. Are you? If so, that explains the reboots. I highly doubt it's the rom
Sent from my SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
I seriously doubt it is the ROM, not trying to blame it.
Trying to figure out if my hardware is going flakey and causing it, if I'm doing something wrong with the install, or some other thing I'm messing up.
I do restore with Titanium, but I only restore apps, not data.
The only other major thing I have changed that I can think of is the DPI to 182.
Ok the apps you restore, are any of them backups you made when you where on a gingerbread rom?
Like, say you were on GB and backed up some apps. Then flashed ICS, then JB, and then restored apps?
Sent from my SGH-I997 using Tapatalk 2
eZdubzitmk4 said:
Ok the apps you restore, are any of them backups you made when you where on a gingerbread rom?
Like, say you were on GB and backed up some apps. Then flashed ICS, then JB, and then restored apps?
Sent from my SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
Nope, all backed up from previous JB ROMs. :\
Do you know any apps that can test the cpu/ram to see if it is going wonky? I looked but only found one that doesn't support the Infuse.
blastagator said:
Nope, all backed up from previous JB ROMs. :\
Do you know any apps that can test the cpu/ram to see if it is going wonky? I looked but only found one that doesn't support the Infuse.
Click to expand...
Click to collapse
Use cpu spy.
It will tell exactly what the cpu uses and if it's going into deep sleep (very important).
I'm thinking there is an app that's preventing the phone from going into deep sleep
Sent from my SGH-I997 using Tapatalk 2
eZdubzitmk4 said:
Use cpu spy.
It will tell exactly what the cpu uses and if it's going into deep sleep (very important).
I'm thinking there is an app that's preventing the phone from going into deep sleep
Sent from my SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
It actually hasn't crashed since I erased the two caches again. Hope I'm not jinxing it now. Been up 35 hours. 53% of that time in deep sleep.
Rooted my phone, but when I went to flash a new ROM I tried doing a CW data wipe, and the phone locked. Took out battery after about 10 min. Booted normal, but I was no longer able to download from the Market. Tried re-flashing the stock stuff, and still no dice. Every time I try to factory reset through the menu it says'Performing factory data reset' and just circles and circles and nothing. Goes on for at least 15-20 min. What is up with the market?
daddyaggie said:
Rooted my phone, but when I went to flash a new ROM I tried doing a CW data wipe, and the phone locked. Took out battery after about 10 min. Booted normal, but I was no longer able to download from the Market. Tried re-flashing the stock stuff, and still no dice. Every time I try to factory reset through the menu it says'Performing factory data reset' and just circles and circles and nothing. Goes on for at least 15-20 min. What is up with the market?
Click to expand...
Click to collapse
What ROM/kernel are you running? Did you wipe davlik yet?
anactoraaron said:
What ROM/kernel are you running? Did you wipe davlik yet?
Click to expand...
Click to collapse
Tried to wipe data but that is when it just locks up. I can turn off the phone and reboot, but the market still doesn't allow me to download anything.
running a stock version 2.3.6
Baseband T769UVMB1
Kernal 2.6.35.11
Build number GINGERBREAD.UVLB7
daddyaggie said:
Tried to wipe data but that is when it just locks up. I can turn off the phone and reboot, but the market still doesn't allow me to download anything.
running a stock version 2.3.6
Baseband T769UVMB1
Kernal 2.6.35.11
Build number GINGERBREAD.UVLB7
Click to expand...
Click to collapse
Not wipe data, wipe davlik. Give it a try.
Sent from my SGH-T769 using xda app-developers app
anactoraaron said:
Not wipe data, wipe davlik. Give it a try.
Sent from my SGH-T769 using xda app-developers app
Click to expand...
Click to collapse
Read that too fast. Dalvik not data. To clear the dalvik cache I need to get into recovery right? Have been trying to do that but can only get into download mode. Tried getting cwm but can't download anything from the market. Thank you for the help you have been offering.
daddyaggie said:
Read that too fast. Dalvik not data. To clear the dalvik cache I need to get into recovery right? Have been trying to do that but can only get into download mode. Tried getting cwm but can't download anything from the market. Thank you for the help you have been offering.
Click to expand...
Click to collapse
So download mode as in your phone is still plugged into your computer and you do the volume hold/power button combo? If that's correct, unplug your phone from your computer than do the volume hold/power button combo. And cwm is installed via odin, not the play market.
Sent from a LiquidSmooth Blaze
njstein said:
So download mode as in your phone is still plugged into your computer and you do the volume hold/power button combo? If that's correct, unplug your phone from your computer than do the volume hold/power button combo. And cwm is installed via odin, not the play market.
Sent from a LiquidSmooth Blaze
Click to expand...
Click to collapse
I SERIOUSLY CAN'T THANK YOU ENOUGH!!! I swear I had been trying all this but nothing. Installing cwm via odin triggered a 'hey wait a minute' moment for me. I had done that, but then re-flashed the stock rom. The cwm flash allowed the recovery to come up and bazinga! All fixed!
daddyaggie said:
I SERIOUSLY CAN'T THANK YOU ENOUGH!!! I swear I had been trying all this but nothing. Installing cwm via odin triggered a 'hey wait a minute' moment for me. I had done that, but then re-flashed the stock rom. The cwm flash allowed the recovery to come up and bazinga! All fixed!
Click to expand...
Click to collapse
Awesome! Glad to help, happy flashing!
Sent from a LiquidSmooth Blaze
I have had flashed the newest Mokee rom around a month ago. It has been working ever since fine. Lately it would freeze up and id have to take the battery out and reboot and it would be fine. But yesterday, it froze and I tried rebooting then it just wont boot. I left it for around 10 minutes and its still booting. I don't want to factory reset because I dont wanna lose all my stuff on the phone. Is there anything I can do?
d1eharddan said:
I have had flashed the newest Mokee rom around a month ago. It has been working ever since fine. Lately it would freeze up and id have to take the battery out and reboot and it would be fine. But yesterday, it froze and I tried rebooting then it just wont boot. I left it for around 10 minutes and its still booting. I don't want to factory reset because I dont wanna lose all my stuff on the phone. Is there anything I can do?
Click to expand...
Click to collapse
reflash a different rom your not going to get it to boot
Reboot your device to BMM recovery and wipe cache/delvic and fix permission.
Sent from my MB865 using xda app-developers app
minhajlk said:
Reboot your device to BMM recovery and wipe cache/delvic and fix permission.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
It didnt work. So do I have any other option than to wipe it?
d1eharddan said:
It didnt work. So do I have any other option than to wipe it?
Click to expand...
Click to collapse
Reflash the rom and gapps
atrix2man said:
Reflash the rom and gapps
Click to expand...
Click to collapse
Didnt work either. Thanks though
d1eharddan said:
Didnt work either. Thanks though
Click to expand...
Click to collapse
There is a release version in mokee thread, download it and make a clean flash. Follow these steps;
Wipe cache, delvic and data
Flash mokee rom and reboot (do not flash GApps)
Let the ROM settle for about 20-30 minutes
Reboot to recovery and wipe cache and flash GApps.
Good luck.
minhajlk said:
There is a release version in mokee thread, download it and make a clean flash. Follow these steps;
Wipe cache, delvic and data
Flash mokee rom and reboot (do not flash GApps)
Let the ROM settle for about 20-30 minutes
Reboot to recovery and wipe cache and flash GApps.
Good luck.
Click to expand...
Click to collapse
It worked, thanks. I have that on system 3 and on system 4, the new slimKat and its really nice.