[Q] ?HowTo? P720 from CM10 back to StockROM - LG Optimus 3D

Is there any working way, to flash my LG P720 back from CM10 to StockROM?
I have tried different ways:
- flash with KDZ_FW_UPD.exe
- flash with UpTestEX_mod2_marwin.exe
- flash with the the LGMobile Support-Tool
I have tried this:
http://forum.xda-developers.com/showthread.php?t=1287236
I have read a lot, but I found no answer... .
What works..
- go to fastboot 0.5
- go to S/W Upgrade mode
- go to USB-Debugging (but no driver's found for this)
Can someone help me please?
THANKS A LOT!!!

have u done NandroidBackup before flashing to CM10?

Now I have the same problem too
My backup is correct and used it one time but now after restoring the phone stucks at first LG logo maybe it kernel issue
Any ideas?
Sent from my LG-P720 using Tapatalk 2(P725 not P720!)

forfoxy said:
have u done NandroidBackup before flashing to CM10?
Click to expand...
Click to collapse
..yes, but the backup is broken.. .
I had the hope, that it is not a big problem, because I had a LG E400, there I could flash back to stockROM without any kind of problems.
I think, the BIG PROBLEM is, that the CM10 flash gives the P720 an other serial number, IMEI is still the right one. Any try to flash back to stockROM stops with mistakes.. for example: "magic number does not concide"
Maybe a chance to change the serial number? (the S/N on the BOX is an other than in the phone!!!/IMEI still correct)
Thanks for help!

boly007 said:
Now I have the same problem too
My backup is correct and used it one time but now after restoring the phone stucks at first LG logo maybe it kernel issue
Any ideas?
Sent from my LG-P720 using Tapatalk 2(P725 not P720!)
Click to expand...
Click to collapse
try to restore your backup then the phone is not plugged to wall charger (i see it's CM 6 issue).
---------- Post added at 06:59 AM ---------- Previous post was at 06:55 AM ----------
cuttero said:
..yes, but the backup is broken.. .
I had the hope, that it is not a big problem, because I had a LG E400, there I could flash back to stockROM without any kind of problems.
Thanks for help!
Click to expand...
Click to collapse
try to flash to THUNDERSNAP mod, and then flash to stock firmware.

Related

Help, problems with booting LG P920

Hello, I have a LG P920. When I was going to root it and install an ICS rom I tried to install the u-boot and x-loader from wkpark. But for som reason the phone wouldn't boot, so it got stuck in a bootloop. After trying to fix it several ways i ended up with it boot directly into recovery and when I try to flash a boot.img it says that it doesn't excist any boot partiton. I have really no idea what to do to fix it. Please help. In advance thank you.
Did you try flash *.bin or *.kdz ??
And what you mean with "when I try to flash boot.img ..." the recovery can not flash a *.img
Just *.zip which contain :- boot.img and META-INF .
Here is the link :-
http://forum.xda-developers.com/showthread.php?t=1629307
Yeah, try flashing with lg flashtool
Sent from my P920 using ICS 4.0.4 by XBSA
When I said flash boot.img I meant trough fastboot, followed this tutorial. And for some reason I cannot access recovery, it is highly possible that I am doing that the wrong way.
I have tried to use LG Flasht tools, but I think I'm doing something wrong. And when thats said, I'm not completly sure in which mode I should be in, meaning fastboot, recovery, download mode. The problem is that when I try using flash tools, it seems when I set it to use port 1 in flash tools nothing happends. When comparing to other screenshots, I can also see that in flash tools it doesn't recognise, or at least not telling me (at the top info bar) what model, or S/W just the file name.
I kind of tried smart flash from the link, but I ended up with a complete wipe, and it seemed like it hadn't been flashed any new rom.
About the mode just remove sim , sd card and the battery press and hold vol up and then connect it to the computer .
About the port , first you should change the port from windows device manager to port 1 .
I'm sorry about the boot.img ...etc . So I see many people in XDA extract the *.zip and flash it with CWM . In XDA I saw every thing
Sent from my LG-P920
Hey this happened to me yesterday
If u can boot to recover then just do a restore if u have a backup this worked for me
Sent from my LG-SU760 using xda app-developers app
I have the same problem. I tried all ways to solve but they didn't work.
I flashed ICS Rom for my P920 from xbsall, but I had some problems about signal. The calls are always disconnected while Wifi 3G work normally.
I decided to flash v21.e ROM ( GB) again but the phone just stuck at Logo LG (I tried both kdz or bin file). Seems to be hopeless :crying:. I also realize that the Emergency mode disappeared ( The screen just flashed fast and off ).
The problem is solved if I flash ICS ROM back, but I don't want to.
Need help from you guys !
dandavid3000 said:
I have the same problem. I tried all ways to solve but they didn't work.
I flashed ICS Rom for my P920 from xbsall, but I had some problems about signal. The calls are always disconnected while Wifi 3G work normally.
I decided to flash v21.e ROM ( GB) again but the phone just stuck at Logo LG (I tried both kdz or bin file). Seems to be hopeless :crying:. I also realize that the Emergency mode disappeared ( The screen just flashed fast and off ).
The problem is solved if I flash ICS ROM back, but I don't want to.
Need help from you guys !
Click to expand...
Click to collapse
What bin have you flashed? I guess you havent used the one from xbsalls guide..
Sent from my P920 using ICS 4.0.4 by XBSA
TMProduct1onZ said:
What bin have you flashed? I guess you havent used the one from xbsalls guide..
Sent from my P920 using ICS 4.0.4 by XBSA
Click to expand...
Click to collapse
I used it but it didn't work
Link here http://forum.xda-developers.com/showthread.php?t=2001953
and http://forum.xda-developers.com/showthread.php?t=1942836
dandavid3000 said:
I used it but it didn't work
Link here http://forum.xda-developers.com/showthread.php?t=2001953
and http://forum.xda-developers.com/showthread.php?t=1942836
Click to expand...
Click to collapse
just use xbsall repair method
I have fixed the phone. After doing a lot of what I don't know what I do. I finally realised that one of my biggest problems was that I used a 64 bit windows 7 computer. The way I fixed mine was trough setting it in normal download mode and you smart flash to get it to an original rom. If anybody need to try what I did and need help from me, if I can provide it. You should send a PM because I am never in the LG P920 thread beacuse I was fixing a friends phone. So as for me this thread can be closed moderators.

I9020t

i have flashed one phone with this firmware I9023XXKD1 than update via wi/fi 4.1.2 and than again flashed with old version I9023XXKD1 now phone is not showing lcd. now what should i do? is my phone bricked!
Wrong thread. Post on Q&A section.
any one help pls im unable to figer out how to do..
Moved to Q&A.
Please follow the Rules with particular interst in where to post Questions.
asadnow2k said:
any one help pls im unable to figer out how to do..
Click to expand...
Click to collapse
Post in the right section for 1
If you can vol up + power and get into fastboot then flash factory
----
Flash the factory image from Google through fastboot -- I assume that you have fastboot working
https://developers.google.com/android/nexus/images
This explains how to do it
http://forum.xda-developers.com/showthread.php?t=1572307
i have done above steps but still no luck. bad display showing charging when inserting usb cable!
asadnow2k said:
i have flashed one phone with this firmware I9023XXKD1 than update via wi/fi 4.1.2 and than again flashed with old version I9023XXKD1 now phone is not showing lcd. now what should i do? is my phone bricked!
Click to expand...
Click to collapse
You have a i9020t and you have flashed i9023 firmware?
i have i9020t and flashed with the same firmware but one thing i done bad.. the flash file was andriod 2.3.6 or some thing and phone firmware was android 4.1.x. phone fast boot still working.. any suggestion? to fully wipe phone memory
polobunny said:
You have a i9020t and you have flashed i9023 firmware?
Click to expand...
Click to collapse
Flash the factory image
i have tried to flash with factory image with the latest one but still same condition! can you bro help me via team viewer to revive the phone
asadnow2k said:
i have tried to flash with factory image with the latest one but still same condition! can you bro help me via team viewer to revive the phone
Click to expand...
Click to collapse
I can try :highfive:
sent u pm pls check
yes and that worked perfect at 1st time!
polobunny said:
You have a i9020t and you have flashed i9023 firmware?
Click to expand...
Click to collapse
ty every one Mr DJBhardwaj solved my problem! now phone working fine again

SU760 KDZ need

I need a stock rom to flash in my SU760 because i briked it. http://csmgdl.lgmobile.com/swdata/WDLSW/LGSU760/ASKTDB/V30b_00/V30B_00.kdz i cant download this kdz.
Can someone give me a good rom to flash? i tryed to flash SU760V10GROM.zip but after i flash, my phone restart and restart and restart.... do you have any ideea why?
LAST EDIT****
Ok, i flashed my phone with V30B but now i got 2 problems, my phone restart after every 2-3 min and i cant restore my imei.
andrei3008 said:
I need a stock rom to flash in my SU760 because i briked it. http://csmgdl.lgmobile.com/swdata/WDLSW/LGSU760/ASKTDB/V30b_00/V30B_00.kdz i cant download this kdz.
Can someone give me a good rom to flash? i tryed to flash SU760V10GROM.zip but after i flash, my phone restart and restart and restart.... do you have any ideea why?
LAST EDIT****
Ok, i flashed my phone with V30B but now i got 2 problems, my phone restart after every 2-3 min and i cant restore my imei.
Click to expand...
Click to collapse
Here Flash It With LG Mobile Tool and All Well Be Ok
OptimusRs said:
Here Flash It With LG Mobile Tool and All Well Be Ok
Click to expand...
Click to collapse
Thank you man you are the best.

H810 bricked after using lgup

please help, my mobile is in bootloop , i was using prerooted system rom h81010o , i wanted to go back to stock rom , so i used LGUP and stock LGH810AT-00-V10o-ATT-US-SEP-10-2015-ARB02+0_User_Secure file, choosed refurbish and flashed it , but now i can only see blinking lights ,LG LOGO , please tell me what should i do now
Amit2310 said:
please help, my mobile is in bootloop , i was using prerooted system rom h81010o , i wanted to go back to stock rom , so i used LGUP and stock LGH810AT-00-V10o-ATT-US-SEP-10-2015-ARB02+0_User_Secure file, choosed refurbish and flashed it , but now i can only see blinking lights ,LG LOGO , please tell me what should i do now
Click to expand...
Click to collapse
Does installation of new sw successful??
If yes, maybe your device already stuck in bootloop issue, have to changed the motherboard.
faizalotai said:
Does installation of new sw successful??
If yes, maybe your device already stuck in bootloop issue, have to changed the motherboard.
Click to expand...
Click to collapse
yes, installation was successfull, it went to bootloop offcourse ,, i tried another method of flashng h810pr version with lg flash tool after reading from xda thread , but it hard bricked my mobile, i think its gone already, no more download mode ,
am going to try in shop if they can do something
Amit2310 said:
yes, installation was successfull, it went to bootloop offcourse ,, i tried another method of flashng h810pr version with lg flash tool after reading from xda thread , but it hard bricked my mobile, i think its gone already, no more download mode ,
am going to try in shop if they can do something
Click to expand...
Click to collapse
Did you tried flash again 10o sw? If its hard brick than nothing can be done...
They might replaced with new one if you have warranty

all data deleted from phone , no os installed ,help asap , in deep trouble

my phone was running the viper custom rom when it suddenly went into bootloops , i tied to flash the rom again but the same thing happened. Finally i decided to do factory reset but due to my stupidity deleted the flash file from the phone too, now i am left with nothing in the phone memory and the adb sideload also fails . Please help asap , please
Me too,bootloop logo leeco,flash rom okay but cant boot system,just stuck logo,and now twrp is loss,cant do anythings
thinhx2 said:
Me too,bootloop logo leeco,flash rom okay but cant boot system,just stuck logo,and now twrp is loss,cant do anythings
Click to expand...
Click to collapse
Try to flash twrp as u have done 1st time just connect it in fastboot... See if it works or flash stock rom using using sptool
..
---------- Post added at 06:43 AM ---------- Previous post was at 06:40 AM ----------
anas_ahmad said:
my phone was running the viper custom rom when it suddenly went into bootloops , i tied to flash the rom again but the same thing happened. Finally i decided to do factory reset but due to my stupidity deleted the flash file from the phone too, now i am left with nothing in the phone memory and the adb sideload also fails . Please help asap , please
Click to expand...
Click to collapse
If u have twrp ....connect phone to PC while twrp is on mtp will show up in PC ... another way is pushing your rom into phone using adb push command
santoshhh000 said:
Try to flash twrp as u have done 1st time just connect it in fastboot... See if it works or flash stock rom using using sptool
..
---------- Post added at 06:43 AM ---------- Previous post was at 06:40 AM ----------
If u have twrp ....connect phone to PC while twrp is on mtp will show up in PC ... another way is pushing your rom into phone using adb push command
Click to expand...
Click to collapse
Done but i flashed 10 rom on xda but only one rom can boot,i think my emmc has problem or unstable,used le 1s about 2 year,will change phone
thinhx2 said:
Done but i flashed 10 rom on xda but only one rom can boot,i think my emmc has problem or unstable,used le 1s about 2 year,will change phone
Click to expand...
Click to collapse
Which one is working?
santoshhh000 said:
Which one is working?
Click to expand...
Click to collapse
R.r 7
thinhx2 said:
R.r 7
Click to expand...
Click to collapse
Did flashing stock rom also not working for u?

Categories

Resources