Hi all, Merry Christmas!
Well, my Christmas isnt so merry this year. Two families (friends with their kids) stopped by for Christmas eve dinner and my son with their kids were playing and the next thing i know, my tf300's screen cracked and no display. I can see the back light turned on, but no display. My TF300's alarm was beeping, so I am guessing that the tablet is still functional, but the screen is so messed up it wont show any display.
My question is, should I even attempt to fix the screen? Or just purchased a new one? I saw many cracked screen pics and all of them were able to turn their screen on.
Please advise on what to do.
Thanks,
Sid.
What's cracked? There 2 components in there: the LCD and the Digitizer. I assume if nothing shows then the LCD is gone, but that's a guess because if there's a crack across it normally would still show some (messed up) image like vertical or horizontal lines. Now the LCD is beneath the Digitizer. If you see cracks on the surface also, that means the Dig is gone too. Which makes it easier but costlier.
You can order both for around $150.00, but replacing can be a pain unless you've delicate hands. Separating the LCD from the digitizer is boring enough but you must to do this to get to the bezel. The more meticulous part is to remove the plastic bezel around the digitizer to reuse on the new one. You have to scrape around the edge because the two parts are initially bonded together by some really strong glue.
In my opinion, it's not worth it to take it to a shop as they would charge an inordinate amount for a used device (around $200.00!!). For the inept, it's certainly damn if you do and damn if you don't. If you need more info 'bout doing it, I can help as I've done it before. Alternatively, if you decide to get a new one and part this out, I am looking for the cable and possibly touchscreen board for mine. Maybe we can work something out. Whatever.
graphdarnell said:
What's cracked? There 2 components in there: the LCD and the Digitizer. I assume if nothing shows then the LCD is gone, but that's a guess because if there's a crack across it normally would still show some (messed up) image like vertical or horizontal lines. Now the LCD is beneath the Digitizer. If you see cracks on the surface also, that means the Dig is gone too. Which makes it easier but costlier.
You can order both for around $150.00, but replacing can be a pain unless you've delicate hands. Separating the LCD from the digitizer is boring enough but you must to do this to get to the bezel. The more meticulous part is to remove the plastic bezel around the digitizer to reuse on the new one. You have to scrape around the edge because the two parts are initially bonded together by some really strong glue.
In my opinion, it's not worth it to take it to a shop as they would charge an inordinate amount for a used device (around $200.00!!). For the inept, it's certainly damn if you do and damn if you don't. If you need more info 'bout doing it, I can help as I've done it before. Alternatively, if you decide to get a new one and part this out, I am looking for the cable and possibly touchscreen board for mine. Maybe we can work something out. Whatever.
Click to expand...
Click to collapse
I am not so sure what's cracked actually. But, if i press the power button, there's just black screen, no display whatsoever although i can see light shines through the cracks. So I am guessing both the LCD and the Dig are gone.
I am thinking about parting the broken one out and buy a refurbished one from walmart and get the walmart protection plan, so I dont have to worry about a broken tablet for at least 2 years.
Related
I am experiancing some problems!
basically I think the manufacturer installed protective screen has come loose from the hard sensor (due to use?) and so the stylus is pushing on an air bubble, and with the software keyboard (virtual keyboard) the wrong buttons are getting pressed.
I dont know whether to cut out that layer with a scalpel (carefully) and use normal screen protectors that stick properly ... has anyone done this before?
Maybe you could apply heat to it to tighten it or something I dont know so I need help!
My phone is an alpine (xda2i) but other pdas must be having the same issue?
is it ok to cut the initial plastic screen that comes integrated with the xda?
Just make sure it is actually a protective screen and not the digitizer (the membrane that makes it touch screen and sits on the LCD) that your cutting away.
with a protective skin there should be no need to cut anything... I honestly think your talking about the digitizer - in which case take to a mobile phone specialist and they could heat sync it for you.
To check whether it is the digitizer or the crappy screen protector, you should be able to see the edge of the layer at the side, especially manufacturer orginial screen protector, they are really crappy. You should be able to seperate the layer (from the edge) with something pointy (e.g. a needle), and then peel it off from there.
If you didn't see any distinguishable edge at the edge of the screen, chances are you should not do anything yourself.
Jonjamesm said:
Just make sure it is actually a protective screen and not the digitizer (the membrane that makes it touch screen and sits on the LCD) that your cutting away.
with a protective skin there should be no need to cut anything... I honestly think your talking about the digitizer - in which case take to a mobile phone specialist and they could heat sync it for you.
Click to expand...
Click to collapse
Thanks for the responses!!!
I have a feeling that it is what you are referring to as a digitizer. Do most of the mobile phone shops do this heat option? as after googling it, not much comes up, or is it referred to under a different terminology,
thanks in advance!
Rob
If your UK based you can find out more about them from apex laptops, google them...
I'm in Edinburgh, and it took me a while before I found someone willing to replace the digitizer.
This is not a common thing - but I think with the introduction of the iphone the markets for heat syncing will go up, I suggest freeing up an afternoon and go to some of those dodgy shops that offer the unlocking service, also some computer repair shop technicians might be confident in doing something of this nature.
Happy hunting!...
JJ McG.
thanks for your help
whatever you do dont approach o2. they are ridiculous, they want to charge 350 dollars to peel off the old one and put a new on one. search ebay and you will find digitizres with screwdriver and peeling, firming tool for 15 dollars plus postage.
o2's repair guys say it "original" spares which make it so expensive....
right...........
rang up
rang up a couple of shops one doesn't do heat sync and the other does but the machines bust, he started talking about soldering etc...(does that sound like it?) but when i re-described the problem he started talking about 50 60 quid for a new screen! which I am not prepared to pay for the relatively minor problem
How is a digitiser different from a normal screen protector anyway?
(placing a normal protector on top of it sort of helped reduce the problems because it applied a little firmness over the offending area....)
O.k the digitizer is not a screen protector. The Digitizer is a membrane that sits atop the LCD.
Note: that the LCD is not a touch screen and the only thing making your device a touch sensitive is this digitizer
digitizers can be pricey, but the reason your guy is costing it at 50 - 60 quid is because he is the middle man and needs to make a profit. You can find digitizers from apex laptops or GPS midlands (links below) and buy them at trade prices
http://www.gpsmidlands.co.uk/index.php?menu=Home
http://www.apexlaptops.co.uk/touchscreens.htm
Dependant on your device will depend on the price.
My guy asked for 10 pounds to replace my screen, which I thought was more than reasonable because if he broke the LCD whilst replacing the digitizer (which he did) he was liable to replace it. Make sure that your guy will do this.
hope this helps.
after googling...
After googling for a bit, I came across someone who had these sort of problems with their own pda
http://jamescrisp.blogspot.com/2007/05/fixing-palm-treos-digitizer-touch.html
it seems that dirt stuck under the sides can cause the same kinds of problems,
after running a bit of paper under the corners of the screen I have found some interesting results, the problems I have have changed slightly and seem to rectify temporarily when I press down (rub down) on the screen...
so I might look at taking it apart with some tools off ebay or something and giving it a good clean... any recommendations on how to strip down and clean an Alpine....? actually I'll repost that in the aline forum if there isn't already a post there....
hope your confident in doing so - I'd take it to a shop if it pisses you off that much - taking it a part and cleaning might end up with you just having a big screen phone with no touch pad...
Up to you, hope your successful
Hi all,
I sat on my Fuze, short and simple. There is now a weird crack on the screen. I am very familiar with what a broken LCD looks like, there is no LCD "liquid" oozing all over the place, and the picture is not distorted in any way. It looks like some kind of lens INSIDE might be broken, and I think it's the digitizer. The cracks stop once they get to the dark grey at&t/HTC border around the screen, even though I hit very close to it, so whatever I cracked is under the top lens/protector.
Also, I read online (albeit at a cell phone repair website) that you can't replace the digitizer without ruining the LCD. Is there any merit to this, or are they just trying to convince people to pay their obscene $149 to replace a $30 part?
So I guess I have two questions:
Did I break the digitizer, the topmost lens, or somehow the LCD glass without damaging the LCD itself?
How hard is this to replace?
Pics:
EDIT: I ordered this on April 17th. Fat chance AT&T will do anything about it, right?
That looks like just the digitizer... I purchased the digitizer already, but haven't gotten the chance to take it apart yet.... to be honest I'm very nervous about taking it apart.. I'm still trying to figure out how to split the two pieces apart (the keyboardbase and the slide screen....
wxy117 said:
That looks like just the digitizer... I purchased the digitizer already, but haven't gotten the chance to take it apart yet.... to be honest I'm very nervous about taking it apart.. I'm still trying to figure out how to split the two pieces apart (the keyboardbase and the slide screen....
Click to expand...
Click to collapse
If I'm not mistaken (and I might be), all this should take is removing the two small phillips head screws on the back of the screen that show when the phone is slid open. I landed on this thing while it was open, and drove my knee right into the screen, I'm surprised I didn't break anything else.
There are three more screws that you can't see behind the screen.... when its slid open you can only see 2 screws... There are actually 5
wxy117 said:
There are three more screws that you can't see behind the screen.... when its slid open you can only see 2 screws... There are actually 5
Click to expand...
Click to collapse
So we do have to take the whole damn thing apart?
Does anyone have any luck with AT&T replacing things that are clearly accidental damage? With all the horror stories I hear about refurbished phones and the chance that they might send me one, I'd actually rather take my chances at fixing this. I've taken apart a ton of phones and fixed them before, and worked at a cell phone repair shop for a few months. I still have most of my tools lying around, including all the screw drivers I'd need to open this.
I was able to find an HTC service manual that doesn't really explain how to replace the digitizer. It does describe how to get it in two pieces, but I wouldn't know where to go from there.
I have the digitizer in my hand... There is a thing that hooks up to the phone itself so yes i'm pretty sure you have to take apart the entire thing.... I think i'm gonna take the phone to NYC and have someone that knows what they're doing repair it. I tried to get warrenty repair, but they said no because it is accidental damage. i pretty much tried everything before I ordered a new screen.
wxy117 said:
I have the digitizer in my hand... There is a thing that hooks up to the phone itself so yes i'm pretty sure you have to take apart the entire thing.... I think i'm gonna take the phone to NYC and have someone that knows what they're doing repair it. I tried to get warrenty repair, but they said no because it is accidental damage. i pretty much tried everything before I ordered a new screen.
Click to expand...
Click to collapse
Found a good complete disassembly guide in Russian, why does the screen have to be the LAST thing to come out? I am now looking to buy an LCD/digitizer combo, but I can only find the one from Brando that is made for regular HTC Touch Pros, and not the Fuze (has a camera cutout instead of the AT&T logo).
If I end up having to replace the LCD I'd much rather break it trying to save $50 than just toss it. Is it really that hard to separate the digitizer from the LCD?
http://translate.google.com/transla...ka/htc-touch-pro/&sl=ru&tl=en&history_state0=
has anyone had success separating the Digitizer and the LCD screen?
wxy117 said:
has anyone had success separating the Digitizer and the LCD screen?
Click to expand...
Click to collapse
Well, we'll find out. I ordered both an AT&T Fuze digitizer by itself as well as an LCD with a digitizer attached. I'm just going to go ahead and replace everything with the combination unit and see if I can replace my broken digitizer without breaking my LCD in my free time. If it works, I have a spare or I can sell it
be careful I got my digitizer and they sent me the wrong one. They sent me one for a sprint touch pro....
wxy117 said:
be careful I got my digitizer and they sent me the wrong one. They sent me one for a sprint touch pro....
Click to expand...
Click to collapse
Hopefully I'll get it right, I made sure to order an AT&T Fuze digitizer that made it clear it wasn't for use with Sprint Touch Pros or Touch Pros with front facing camera.
The LCD+digitizer I ordered though may very well show up as any of the above, if they're not already attached I'm going to use the AT&T Fuze digitizer on the new LCD, and try and make a new working combo from my old LCD to resell. I'll make a detailed step by step with photos as well.
Don't forget to read this
They just sent out my new one today.... So anyone that needs a digitizer for the Fuze by Sprint hit me up.... They told me to keep it so now I have an extra digitizer that doesn't work for my phone...
I think I can help you cos I repaired LCD and digitizer on Raphael a week ago. Digitizer and LCD are two separate parts joined by flat printed wires. If you need to change just one of them you will need to take apart whole phone.
Raphael consists from 2 main parts - 1. that one with keyboard 2nd part with LCD. You have to take apart both what is quite hard to realize if you this for the first time.
Once you are with your LCD you will see the flat wires grom lcd and digitizer meerged. Split them with your solddering gun carefully! Take new digitizer and solder flat wires together. Anyway there is no glue or liquid fluit or whatever between digitizer and LCD. But - remeber especially those who replacing just LCD - there is kind of black tape around the backside of LCD part (the silver side) - take it apart from old lcd and move to new one. If you dont you will see the rainbow on your LCD but just after assembling whole device together - it is quite concerning if you find out this kinf of malfunction just after such a hard work like a assembling this hellmade device
Good luck to everyone!
pisqle said:
I think I can help you cos I repaired LCD and digitizer on Raphael a week ago. Digitizer and LCD are two separate parts joined by flat printed wires. If you need to change just one of them you will need to take apart whole phone.
Raphael consists from 2 main parts - 1. that one with keyboard 2nd part with LCD. You have to take apart both what is quite hard to realize if you this for the first time.
Once you are with your LCD you will see the flat wires grom lcd and digitizer meerged. Split them with your solddering gun carefully! Take new digitizer and solder flat wires together. Anyway there is no glue or liquid fluit or whatever between digitizer and LCD. But - remeber especially those who replacing just LCD - there is kind of black tape around the backside of LCD part (the silver side) - take it apart from old lcd and move to new one. If you dont you will see the rainbow on your LCD but just after assembling whole device together - it is quite concerning if you find out this kinf of malfunction just after such a hard work like a assembling this hellmade device
Good luck to everyone!
Click to expand...
Click to collapse
Thank you for some rather broken, but very helpful advice. Kinda sucks that I'm really happy since I don't have to worry about removing any adhesive, but now I have to sit here and solder flex cables. I shoulda bought a spare one
Do they ship these parts on pigeons from Hong Kong?
To anyone counting on being able to separate the LCD from the digitizer, DON'T. There is absolutely no way to separate them without destroying either or both. Also, take extreme caution when peeling up the flex cable, it is very easy to tear (I tore mine).
So my net cost, 80 + 50, LCD/Digitizer and Flex Cable = $130 vs. sending it to HTC $150. I advise anyone to just pay them rather than take this thing apart.
from my understanding people have done it before... Maybe you just had bad luck? Well we'll see when my screen comes in *crossing fingers*
wxy117 said:
from my understanding people have done it before... Maybe you just had bad luck? Well we'll see when my screen comes in *crossing fingers*
Click to expand...
Click to collapse
Fact of the matter is when people say this is a delicate phone to take apart, they mean it. I worked at a cell phone repair store for a few weeks, and learned how to take apart damn near anything (thank God this was before the iPhone existed). Not only are both flex cables in this phone taped down in 100 different places, making them very easy to tear while removing the tape, the adhesive used between the LCD and digitizer is STRONG. If you really wanted to separate them, you might have some luck with a straight edge and maybe an hour. Good luck, I'll let you all know how this turns out once I have my new flex cable, since I conveniently tore the volume buttons off the original.
I just got my screen today so we're gonna see some time next week how we do on this screen replacement....I'll let you know how it goes....
So far no luck with my digitizer. Has anyone had any luck just changing out the digitizer yet? The guy that was suppose to do mine is backing out because he doesn't want to risk cracking my LCD. I don't blame him thats the reason I didn't do it. sheik124 what are you doing with your damaged fuze? Are you sending it to HTC for repairs?
Hi,
First of all, I know I am stupid. Way stupid than I thought I am.
I recently went to a roller coaster theme park. Now wait.. don't start painting your imagination... I did not drop my phone (Diamond) during any ride... but I tried to be smart. I kept the phone in my back pocket so that it won't fly off during ride. However, I underestimated the forces that would be exerted on the phone during the ride.
Thus, at the end of the day, when I pulled out my phone.. I saw that there is a yellowish mark on my screen. Please see the attached photo. It is a bit blur as I used my colleagues phone to take the photo... but nevertheless, it gives a good idea of damage.
Is this pressure damage?
What part is damaged... LCD or digitizer?
Do I need to replace it.. or there is way to fix this?
Thanks for reading the post. Please let me know if you have any suggestions/recommendations
Digitizer vs LCD Replacement
Looks like the digitizer. The part behind the LCD (think p-n-j sandwich).
lcd + digitizer + housing = 'screen'
**Careful**
- when disassembling, there are usually 3 ribbons 1 keyboard 2 power 3 data. break 1 throw away the phone .. or buy a new one.
- the digitizer should never ever ever ever be touched, wear plastic gloves. Sometimes surgical gloves have powder inside.
- if you have to bend anything for removal,
bend LARGE surface area to avoid cracking or pressure damage on a single point.
best of luck
I payed
HTC Desire Z $85 digitizer
HTC incredible S $30 LCD
so expect to pay like $60-$100 after shipping etc.. (cdn dollars)
***you'll need the tools, get a store bought kit they will last longer, but there more $$
I have a similar problem. Mine is a Moto XT720. Can anyone suggest where I can get the digitizer for XT720.
This topic has clues for replacing the screen. I have not concluded an manual for chancing it yet but reading this whole topic gives you the big picture how it is done. Questions are always welcome and I try to answer them with my knowledge. This 1st post gives you 2 links to follow for pics about changing screen and my own starting point for chancing my own screen.
Has anyone bought and installed a digitizer+screen set which is on sale at ebay? I could not post direct link to ebay because I'm a newbie on these forums. You can find the product searching ebay with these keywords "I9000 digitizer". My galaxy's screen cracked and I need an replacement. Both screen and glass broke. I think that this set includes them both. There is also told in the questions that the set infact includes amoled display and not LCD as the title says.
Second question is that does someone have an service manual somewhere. Would be nice to know how to break apart my phone when replacing screen.
Third question is that doesn't samsung vibrant and galaxy s share the same chassis but different screen with more capacitive buttons. Could it be possible to install vibrant's screen to galaxy s?
PS. The way my galaxy brokedown is very funny. I lay down my phone on the kitchen table and the screen cracked. I was like OMFG when I heard the cracking noise. Phone was like 13 days old. Samsung does not repair it with warranty because they think that it wasn't an manufacturing defect. They said that I have dropped my phone and that's the way it broke. That could not be the case because I handled it like a baby. I would have to pay 255€ for new screen and digitizer. Hell no!! I'm a student so that sum does not fit with my wallet.
New screen installed, see posts http://forum.xda-developers.com/showpost.php?p=7683527&postcount=37 and http://forum.xda-developers.com/showpost.php?p=7710572&postcount=40
Edit: Ebay's prices have rised noticeable in the last couple of months. At the moment the price for these screens is around 100$. I found this site which sells them for 60£. http://www.shineyourmobile.co.uk/ProductDetails.aspx?pid=8128
pekkala89 said:
Second question is that does someone have an service manual somewhere. Would be nice to know how to break apart my phone when replacing screen.
Click to expand...
Click to collapse
There are 2 videos on the net, both on youtube I think. Just search "i9000 Disassembly" and you'll find one of them.
The Galaxy S has a serious design flaw as the glass goes around the home button (and the call ear/speaker) so it's very vulnerable there to shattering. I had my phone in the pocket and suddenly when I take it out I see it cracked right next to the home button. What had I done during the time it got cracked? The only possible explanation was carrying a _small_ speaker that then probably hit it. I was so surprised when I saw it cracked because even a speaker hit, when I lifted it up, is hard to consider cracking the screen.
So international model Galaxy S owners, be careful at the bottom and top of the screen. They're the weak points of the glass. For me only the glass cracked and not the screen so it will be interesting to see how much it will cost to fix.
Schmich said:
So international model Galaxy S owners, be careful at the bottom and top of the screen. They're the weak points of the glass. For me only the glass cracked and not the screen so it will be interesting to see how much it will cost to fix.
Click to expand...
Click to collapse
I think that you can't change only the glass. Amoled screen is so thin and I believe it's glued pretty thight to the glass. Separating them may be impossible without tearing the amoled.
the same...
i had a similar unfortunate event ... my screen cracked when i hit the phone to the metallic frame of a chair (it slipped out of my hand )...
it cracked exactly like you people said... near the home button.
i ordered the display + digitizer and i anxiously await its arrival to see if i can replace the damaged one.
it is quite tricky to dissassemble the display part but hope to succed...
keep you posted with the outcome
respect
pekkala89 said:
I think that you can't change only the glass. Amoled screen is so thin and I believe it's glued pretty thight to the glass. Separating them may be impossible without tearing the amoled.
Click to expand...
Click to collapse
Yeah that's my fear but I presume they just heat up the glue. That's how some industries do for other products. I think dental bracers (& its glue) have a different technique as well. So, will be interesting to see.
gallaxya said:
i ordered the display + digitizer and i anxiously await its arrival to see if i can replace the damaged one.
Click to expand...
Click to collapse
Where did you order it from?
If you were asked to pay more than $250 for screen replacement, then why don't you send it to Samsung in Korea? They will replace your SAMOLED for mere USD $100ish and ship it back to you for free (or may be not). This way you get a genium quality from original manufacturer and absolutely no hassles!
I dropped mine from around 4ft onto a concrete floor and its fine. Maybe I just got lucky.
Digitizer+Samoled set ordered from ebay. I should get it in two weeks. If possible I try to take pictures of the changing process and make an manual. I hope it's not glued tight to the chassis.
please do, i have some f***ing little scratches all over the screen, thought it was supposed to be scratch resistant.
Worst part is that it's in it's protective pouch all the time (maybe that's the probleme, dirt/dust might get trapped and rub against the screen).
Got my digitizer and amoled screen t
oday. I will report back if its a hard job or not to replace it.
Sent from my GT-I9000 using XDA App
yrizan said:
Got my digitizer and amoled screen t
oday. I will report back if its a hard job or not to replace it.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I tried to remove broken screen for 2 hours and no luck. Removing the motherboard is problematic because power button is glued to the chassis so I could only turn the motherboard aside and not remove it completely. I tried also to remove metal edge but I could only separate it from the left and right edge, not from top and bottom. I hope you have better luck and report how you managed to overcome my problems.
pekkala89 said:
I tried to remove broken screen for 2 hours and no luck. Removing the motherboard is problematic because power button is glued to the chassis so I could only turn the motherboard aside and not remove it completely. I tried also to remove metal edge but I could only separate it from the left and right edge, not from top and bottom. I hope you have better luck and report how you managed to overcome my problems.
Click to expand...
Click to collapse
Sorry to say got in to the same problems
Looks like the phone is build around the screen. Be careful with the metal ring, on top and bottom its between the screen and chassis, so if you brute force to much the screen cracks even more. The screen is glued to the chassis all around with superglue. I am not sure if its even possible to repalce the screen. It let me thinking that samsung wont repair broken galaxys , just replace them.
Ill keep working on the phone and keep trying, but compared to changing the screen on iphone is this like changing the screen on a iphone as a blind man without arms.
People thinking of buying this screen kit on eBay, don't do it. Just contact samsung for a repair.
Ill keep you posted.
I got the screen off.
No need to loosen the metaling ring around. The screen in dropped in the chassis from the front.
On the mainboard, just pop off the screen cable, long and flat next to the SD card slot.
The next step is very strange, just use brute force and crack the screen off the chassis, start from the top
When you get around the home button, be careful. Samsung has clued 2 sensors to the screen and chassis for back and option button. Best thing to do here is bend the screen back a little and cut loos the sensors from the digitizer with a sharp knife/scalpel. Samsung has used insane amount of clue on this phone.
Both the digitizer and amoled screen was clued to the chassis.
The next step is to clean off all the clue, buy loads of glue. Fill the chassis with glue and press the new screen on.
Wish me luck.
Ill keep you posted.
Making me a bit scared reading this thread, I`ve just bought phone Insurance just in case.Good luck fitting your replacement screens, sounds a bit daunting.
YES!!!
New screen in place and everything is working perfectly. Took about 3 hours first time (give or take). Its possible to do it a lot faster. The biggeste problem is the glue. Melting at about 120 celsius, but i was scared to heat the glas as i didnt know how much heat the mainbord could stand. All in all a pain in the a**, but doable.
I can also confirm this screen from ebay to be an orginal samsung amoled screen.
Best of luck too others trying a screen replace.
Sent from my GT-I9000 using XDA App
amoled or samoled though?
My mistake. Its a samoled screen
Sent from my GT-I9000 using XDA App
Awesome!!! thanks for the review
did you manage to snap a few pictures meanwhile you were working in your phone?
Im sorry, no pictures
The charger is missing to my canon camera, new one incomming from ebay. I'll post pictures next time ill change the screen ;-)
Sent from my GT-I9000 using XDA App
Well, I knew the time would come, I shouldn't be so picky on cases. I had my phone in my lap, hopped out of the car and heard my phone drop from my lap. Totally forgot it was there. One corner impact and it cracked my screen, which is disappointing because I drop my iPhone all the time and nothing happens to it. But, at least it's not the whole screen that's shattered, might even be a waste to replace it. The screen is responsive still.
With that said, anyone know where I can get a replacement screen or should I have a "professional" do it?
I'm looking at this:
http://www.ebay.com/itm/LG-Google-N...e_Replacement_Parts_Tools&hash=item233373ec1c
That way there's no damage to the frame.
well yeah i want to know that too and how much it cost me to replace the screen
Sent from my Nexus 5 using Tapatalk
@dinggus
Ebay link looks OK. I guess you can replace screen yourself, if you have "straight" hands. Nexus 5 Teardown should helps you.
BTW, more Parts for Nexus 5.
Well, if you are going to try this one yourself, it's one of the "easier" ones. As long as you get the LCD assembly and frame that is already put together. On eBay, there are some vendors selling the the assembly + frame for $135. No really crazy tools are needed. Shouldn't be anything too catastrophic happen since you are changing the whole front of the phone. If you were trying to separate the top glass, I'd definitely advise against if you aren't a pro. If you absolutely don't feel comfortable with doing it and can be without the phone for a few days, then feel free to PM me, and we can discuss other options.
If you have steady hands, enough patience and some previous experience in disassembling phones (youtube could help a lot), it shouldn't turn out to be quite a big challenge.
I would advise though in some attention taking off the rear cover (it's not difficult, but if you apply too much pressure you might end up bending or breaking it). Same goes with the battery, which is attached to the back of the screen with some adhesive. Use a plastic tool for this, and try to peel it off with a strong and steady hand. Once you do that, it's only a few screws.
I think LG would fix it for $150 so $135 to fix it yourself eh. Unless you want the accomplishment, but I have never ventured into replacing a cracked screen.
Just got off the phone with LG, they said they can't price over the phone, they have to have a tech see the phone and they'll call with a quote. So, 2 weeks without a phone just to get a quote and maybe repaired if I want to spend that kind of money.
I am 80% positive that I have viewed a few post of them charging $150 for screen replacement. You aught to check in the thread "who dropped it" the answer might be there. Its in general. Hard to find with xda app.
Sent from The Deathstar
Well, turns out once the screen is cracked it cracks easier now. As of now, the phone starts clicking on random things when the screen is touched.
I'm debating to either buy a new one and sell this one, should come out to the same price as buying a replacement screen once the cracked phone is sold.
What would you guys suggest? I can't send it in to LG as I need my phone and replacement screen + front housing is $200 to replace myself or $220 to replace by a professional.
I'm looking at this: http://www.etradesupply.com/lg-nexus-5-lcd-screen-and-digitizer-assembly-with-frame.html
It seems to come with majority of everything and I just need to transfer over the antenna wires, motherboard and battery.
or
http://www.repairsuniverse.com/lg-g...exus 5 Screen with Frame&utm_campaign=LE55ONS
I'll have to transfer over everything, which they have a tutorial - https://www.youtube.com/watch?v=OPuCmfhzgbg - which makes me nervous seeing this.
dinggus said:
Well, turns out once the screen is cracked it cracks easier now. As of now, the phone starts clicking on random things when the screen is touched.
I'm debating to either buy a new one and sell this one, should come out to the same price as buying a replacement screen once the cracked phone is sold.
What would you guys suggest? I can't send it in to LG as I need my phone and replacement screen + front housing is $200 to replace myself or $220 to replace by a professional.
Can't you try the below? Quite easy to dis-assemble the phone, steady hands and proper screw driver + torx driver, use a hairdryer to warm up the glue connecting the battery + LCD to the digitizer
Sorry can't post external links to XDA due to post counter search Ebay for "Frame-LCD-Display-Touch-Digitizer-Screen-for-LG-Google-Nexus-5-D820-D821" results are between $108-$120 ...
Click to expand...
Click to collapse