Related
I software OTA update from system and now can't reboot system now. Any one please help me?
Now my eee pad screen is recovery mode showing. Can't reboot system....HELP.....
I am having the same problem. I have tried multiple work arounds' with no luck. Any help would be appreciated.
Ok, just select reboot and press both volume up and down, and keep them in...
A new screen will appear from where the Transformer will boot into Android.
I'm having this exact same issue, quit annoying this is
I've already tried a dozen times to change the clockwork recovery to a newer version but the old crappy one sems to be not willing to make room for the newer touch version.
ps In Rom manager I see the correct version of the cloackwork recovery as being installed but once going into the real recovery it is the old one
Alternative way to result
I installed custom ROM (Android revolution HD) from SD card.
Now it's Ok....This ROM is rooted and fastest..
http://forum.xda-developers.com/showthread.php?t=1245892
ROM manager doesn't work well for the tf, just don't use it in general Dx
minnaing - Good choice of ROM Glad it could be resolved, that was the first thing I was going to suggest to do.
Hello,
I know this is not the first time this topic is brought, although it is usually part of an unrelated thread.
I have this AllWinner A10 mk802 , a strange device (it looks like a usb flash drive, but is an Android 4.0.4 computer on which you plug your own screen, mouse and keyboard, making it a Desktop PC on a stick running Android).
Not being a big fan of tablets, I thought I'd give it a try -- Android with a keyboard and a mouse (!). It doesn't look too bad even if it is not powerful enough for my tastes and I can't install CM9/10 on it because of the issue I'll bring here in a second. (In the meantime I installed Uberoid 1.2, which is the stock chinese Android 4.0.4 image which most of its cruft removed -- still doesn't feel right, though.)
There are experimental builds of CyanogenMod 9 and 10 for it, there is a ClockworkMod for it, but I can't use it: when I get into recovery mode, I get a visually awkward-looking (see http://i.imgur.com/Nchso.png ) CWM screen, which wouldn't be a problem if I were able to move through the menus. I've tried with three different mice, three different keyboard, the only thing I was able to do was to flash the screen (it turns black 2 ou 3 seconds) and that's all.
Now, I'm almost there. I just need to be able to wipe the existing system, install CM10, its support (legacy) file and GApps. For that, all I have to do is a dozen of key presses. But I think that I've tried everything.
Has anyone here fought this or a similar issue and won? If so, how did you proceed?
Thanks!
cpl593h said:
Hello,
I know this is not the first time this topic is brought, although it is usually part of an unrelated thread.
I have this AllWinner A10 mk802 , a strange device (it looks like a usb flash drive, but is an Android 4.0.4 computer on which you plug your own screen, mouse and keyboard, making it a Desktop PC on a stick running Android).
Not being a big fan of tablets, I thought I'd give it a try -- Android with a keyboard and a mouse (!). It doesn't look too bad even if it is not powerful enough for my tastes and I can't install CM9/10 on it because of the issue I'll bring here in a second. (In the meantime I installed Uberoid 1.2, which is the stock chinese Android 4.0.4 image which most of its cruft removed -- still doesn't feel right, though.)
There are experimental builds of CyanogenMod 9 and 10 for it, there is a ClockworkMod for it, but I can't use it: when I get into recovery mode, I get a visually awkward-looking (see http://i.imgur.com/Nchso.png ) CWM screen, which wouldn't be a problem if I were able to move through the menus. I've tried with three different mice, three different keyboard, the only thing I was able to do was to flash the screen (it turns black 2 ou 3 seconds) and that's all.
Now, I'm almost there. I just need to be able to wipe the existing system, install CM10, its support (legacy) file and GApps. For that, all I have to do is a dozen of key presses. But I think that I've tried everything.
Has anyone here fought this or a similar issue and won? If so, how did you proceed?
Thanks!
Click to expand...
Click to collapse
I just got one also and have found a forum that is pretty comprehensive. I am doing a lot of reading before I jump to it. Try here:
http://www.rikomagic.co.uk/forum/index.php
Let me know how it goes as I am sure to root and flash CM10 as soon as some one gets it figured out.
Mac N Ts Daddy said:
I just got one also and have found a forum that is pretty comprehensive. I am doing a lot of reading before I jump to it. Try here:
http://www.rikomagic.co.uk/forum/index.php
Let me know how it goes as I am sure to root and flash CM10 as soon as some one gets it figured out.
Click to expand...
Click to collapse
I have dug this site also and wasn't able to find anything (or anything actually working) for my CWM problem. If you find something there that helps you, please share.
Thanks!
I have the same issue, Maybe someone can make Livesuit .img from the CM9/10 packages and compatible gapps and comp zips?
I just got a MK802 for testing and if it works fine with CM I will keep it or even better get a new one, but I am dealing with the same issue, the mouse/keyboard entry reboots the recovery, as if any movement is an enter and reboots the MK into recovery...
If anyone of you guys were able to fix this I would appreciate the info..
LuciusK said:
I just got a MK802 for testing and if it works fine with CM I will keep it or even better get a new one, but I am dealing with the same issue, the mouse/keyboard entry reboots the recovery, as if any movement is an enter and reboots the MK into recovery...
If anyone of you guys were able to fix this I would appreciate the info..
Click to expand...
Click to collapse
+1
Hi all.
I had the same problem.
My mouse works perfectly in both versions of stock MK802+ firmware, but in CWM it switches the screen off for a few seconds every time I move it. The same is happening with my keyboard, so I am struggling to flash cyanogenmod.
SOLUTION:
I changed the mouse to a wireless one (not bluetooth, but standard 2.4), I had lying around and it worked fine.
I think it's because the first mouse I tried has a laser pickup which draws more power or maybe its just a cwm driver issue.
The keyboard and mouse I originally used are quite fancy gaming products, so maybe they are just too "high-tech" for Clockword Mod.
Cheers
Steve
CWM video anomaly on MK802
Hey Everyone !
XDA noob here but I've been modding my junk for several years now since HTC Eris.
I'm having the exact same problem as cpl593h, screenshot is identical.
I wanted to use TWRP, I love that recovery -best thing in device modding ever IMHO, but I can't see anythig about mouse support. It's all touchscreen I guess. I tried GooManager but it were a no go. Still trying to find a recovery alternative to CWM. I know it's been around a long time but I've had more trouble with it that successes.
If I find a workaround, I'll post it here!
CyberCorgi3K
CM10 livesuit image
avishayil said:
I have the same issue, Maybe someone can make Livesuit .img from the CM9/10 packages and compatible gapps and comp zips?
Click to expand...
Click to collapse
hey there,
btsimonh from miniand.com managed to make a livesuit compatible .img of CM10. What's also included is zulu99's work of including droidmote compatibility. So no need to struggle with CWM any more.
Simon said that he will put some efforts in optimizing the ROM further.
So if there's any progress, I'll post that.
Sadly, as a new user, I'm still not allowed to post some links.
So I guess it's good to PM me until I reached URL posting threshold.
cpl593h said:
Hello,
I know this is not the first time this topic is brought, although it is usually part of an unrelated thread.
I have this AllWinner A10 mk802 , a strange device (it looks like a usb flash drive, but is an Android 4.0.4 computer on which you plug your own screen, mouse and keyboard, making it a Desktop PC on a stick running Android).
Not being a big fan of tablets, I thought I'd give it a try -- Android with a keyboard and a mouse (!). It doesn't look too bad even if it is not powerful enough for my tastes and I can't install CM9/10 on it because of the issue I'll bring here in a second. (In the meantime I installed Uberoid 1.2, which is the stock chinese Android 4.0.4 image which most of its cruft removed -- still doesn't feel right, though.)
There are experimental builds of CyanogenMod 9 and 10 for it, there is a ClockworkMod for it, but I can't use it: when I get into recovery mode, I get a visually awkward-looking (see /*NO LINKS*/ ) CWM screen, which wouldn't be a problem if I were able to move through the menus. I've tried with three different mice, three different keyboard, the only thing I was able to do was to flash the screen (it turns black 2 ou 3 seconds) and that's all.
Now, I'm almost there. I just need to be able to wipe the existing system, install CM10, its support (legacy) file and GApps. For that, all I have to do is a dozen of key presses. But I think that I've tried everything.
Has anyone here fought this or a similar issue and won? If so, how did you proceed?
Thanks!
Click to expand...
Click to collapse
Hi2all!
I have exact the same problem with device "appolo-mele" (allwiner a10 platform) - graphics looks to bad, also when i try to switch menu entry - screen turns off and then turns on (on next menu entry), but CWM works fine (backup and restore functions).
I tried:
1. CWM for Allwiner A10 ("CWM 6.0.2.8 for Allwinner A10 & A13 Tablets - v2a") - "graphics problem"
2. Some other CWM 5... and 6... versions for Allwiner A10.
3. Build cwm recovery from sources, using native boot.img, following the "[GUIDE] Build CWM recovery " by buffo1987 and "[GUIDE] Compile CWM Recovery" by Shaaan. - "graphics problem", anything else works fine.
Here is some info about device:
1. It is a TV Box device with HMDI, WiFi, LAN, SPDIF optical audio out and AV-TV out ("3.5 4contact jack in device to 3 tulip connectors to TV"), 2 usb
2. Complied 6.0.3.7 CWM
3. cpuinfo: ARMv7Processor rev 2 (v71) , sun4i
4. other info is similar to "Rikomagic MK802+"
Maybe I should try to use custom "graphics.c"?
Can some help me with my problem?
Attached is the latest version of the recovery file.
Hi guys,
I just bought a new Coby Kyros MID8127 tablet (A8, Android 2.3) for my friend.
Now, I want to flash a custom ROM with JB on it, but I just did not find any ROM, CWM or tutorial for that here at XDA (or elsewhere).
Is it possible, that there is no custom ROM for that tablet to have?
Thank you in advance.
Greetings,
sYCO
I have the same tablet and I bought a custom ROM from the people at KTZ, however, I could not install this ROM successfully, in order to install it I had to take the tablet to factory reset state and then delete a bunch of system applications to make room for the new ROM because the ROM does not allow you to install it from a formatted system partition (it's more like an upgrade). But when I finally installed the ROM it wuold not boot a second time; what that means is that, after installation the ROM boots normally but if I reboot it gets caught in a loop where I just see a blue disk spinning and it doesn't do anything else and the only way to get it out of that loop is to connect the USB cable and boot to recovery via adb and restore the backup that i did before flashing the new ROM. I tried to get help from the guy who makes these ROMs but he wasn't very helpful. I followed all his instructions and always got the same result.
I managed to install manually most of the components of this ROM through a long process of trial and error and left out the components that make the tablet misbehave and now I have a hybrid on my tablet which works pretty well with the exception of the wifi. The wifi works but at times is painfully slow.
I tried other ROMs from Android Tablet forums (check here). There is an ICS Rom there (or more than one, I don't remember) and also a JB ROM for the 8127 but I could not make them work on my tablet. The ICS ROM installed fine and runs very fast but it keeps freezing so I uninstalled. The Jelly Bean did not install properly and it was very hard to get the tablet to a working state after it bricked.
That was a while ago and I haven't checked lately if there is something else out there.
leunam12 said:
I have the same tablet and I bought a custom ROM from the people at KTZ, however, I could not install this ROM successfully, in order to install it I had to take the tablet to factory reset state and then delete a bunch of system applications to make room for the new ROM because the ROM does not allow you to install it from a formatted system partition (it's more like an upgrade). But when I finally installed the ROM it wuold not boot a second time; what that means is that, after installation the ROM boots normally but if I reboot it gets caught in a loop where I just see a blue disk spinning and it doesn't do anything else and the only way to get it out of that loop is to connect the USB cable and boot to recovery via adb and restore the backup that i did before flashing the new ROM. I tried to get help from the guy who makes these ROMs but he wasn't very helpful. I followed all his instructions and always got the same result.
I managed to install manually most of the components of this ROM through a long process of trial and error and left out the components that make the tablet misbehave and now I have a hybrid on my tablet which works pretty well with the exception of the wifi. The wifi works but at times is painfully slow.
I tried other ROMs from Android Tablet forums (check here). There is an ICS Rom there (or more than one, I don't remember) and also a JB ROM for the 8127 but I could not make them work on my tablet. The ICS ROM installed fine and runs very fast but it keeps freezing so I uninstalled. The Jelly Bean did not install properly and it was very hard to get the tablet to a working state after it bricked.
That was a while ago and I haven't checked lately if there is something else out there.
Click to expand...
Click to collapse
Hey Guys,
Just found this link. Maybe you can try it out and tell me if it works for you.
http://www.androidtablets.net/forum...lly-bean-stock-lite-mid8127-rooted-gapps.html
jpapadami said:
Hey Guys,
Just found this link. Maybe you can try it out and tell me if it works for you.
http://www.androidtablets.net/forum...lly-bean-stock-lite-mid8127-rooted-gapps.html
Click to expand...
Click to collapse
Sorry, I gave that tablet back and cannot test it anymore. I rather recommend to buy an Ainol Novo 7 Crystal. It is cheaper, better and ****ing fast with a nice custom ROM support like CM 10, CM 10.1, Paranoid 3.0, Crystal-Fuse, ...
Btw, KTZ sucks totally.
Hey gang, I got this Flytouch 8 tablet last week, model number is BC1003, android version 4.0.4, baseband version 1.5rc4, kernel version 3.0.8+ [email protected] #68 Sat Dec 8 08:54:36 CST 2012, build number crane_bc1003-eng 4.0.4 IMM76D 20121217 test-keys.
I've tried several options to load the recovery partition, only way I can access the recovery is through the backup and reset menu in settings, if I try to do it with the device powered off and holding the menu and power it just boots normal. I've tried a number of options home+power, vol up or down + home, none work. When I do get into the recovery, I cannot scroll through the options only thing there is the android robot with a red triangle and an exclamtion point.
Recovery version says android system recovery 3e EVB-V13.
I also cant get the sd card to mount. I've tried refromatting it with fat32, fat16, ext3 ext4. everything I get a message saying sd card damaged. I've tried 3 different card and same thing.
Any ideas XDA friends? I would like to put a custom rom like AOSP or CM9 or CM10 on it and clockwork recovery if that is an option. I've searched the net high and low for roms, I find many for other Flytouch tablets, but not Flytouch 8. This is the allwinner A10 processor in this one.
Thanks for your help friends.
I
Same problem her with a rooted FT 8 (same as yours)
.
After reboot i get sd card damage error.. after give this da RW i can mount this card again in settings/ storage.
After a reboot i get alway the error sd card damage....
I can get CWM 6.02 on this flytouch but didn`t get any custum roms or CWM backup installed...so get back tio basic image file with Livesuite.
have same recovery : recovery 3e EVB-V13 but cannot do anything with it. It don`t react with all the combination button on my flytouch.
Hopefully you can?
Same problem her with my fluytouch 8 32GB any halp pleas.
Recovery menu
hi
I've got the same tablet from china, am stuck at same spot as you are all, but I figured out how to move through menu in recovery, use usb mouse or keyboard.... any news on some custom rom and installation on this lousy tablet would be appreciated......
Solved Recovery Issue.
Hey everyone. I found this thread today, I tried it and it works perfectly. http://forum.xda-developers.com/showthread.php?t=2189640
I also read somewhere that Allwinner A10 and A13 cannot be flashed using stock recovery, you must use a program like Livesuit to flash firmwares. You can flash custom roms using CWM once it's installed on your device.
fldave612 said:
Hey everyone. I found this thread today, I tried it and it works perfectly. http://forum.xda-developers.com/showthread.php?t=2189640
I also read somewhere that Allwinner A10 and A13 cannot be flashed using stock recovery, you must use a program like Livesuit to flash firmwares. You can flash custom roms using CWM once it's installed on your device.
Click to expand...
Click to collapse
thanks man, this is good news, first step forward in cracking this damn slow tablet....now we need decent rom to install, any ideas?
Possible bricked BC1003..
Hi there I've got the exact same tablet with you BC1003 Model Flytouch Allwinner A10 Superpad 8 1GB Ram version running Android 4.0.4 stock.
So after following guides and researching a lot I ended up trying to upgrade to Jelly Bean.
I got CWM 6.02 installed fine. So I started the flash process.
Firstly I backed up my stuff and then I did a wipe data / factory reset.
Then proceeded and installed the latest possible rom version which I found to be : AOKP JB 4.1.2 ALLWINNER A10.zip
So I installed that one and the process went fine.
Then I installed this compatibility pack : t05a-v3_compatibility_1.2.0.zip
It also went fine.
Then I installed this google apps pack : gapps-jb-20120726-signed.zip
And it also installed normally.
So I was ready to reboot my tablet and so I did.
It turned off and then on again and here we are :
I now notice the screen turn on but it never shows anything..
Before flashing it it would turn on and show the Android OEM screen, then show the android loading text and then turn off and on and show the locked screen which I had to unlock and enter my desktop.
I notice that the screen light follows that pattern so the system is running normally only I don't get to actually see anything on it.
Now I'm kinda stuck here.. I've installed LiveSuite but when I try to install the recovery.img I have from my backup it says invalid image..
Have I bricked it or is there a way out of this mess?
Actually it's not entirely bricked.. well I finally got it to work with LiveSuit 1.09 and managed to flash its firmware to a couple more roms.
1. sun4i_crane_t05a_20120409.img -> Ends up showing some messy stuff on the screen. Looks like the resolution is not correct.
2. sun4i_crane_futekoA90universal_20120531.img -> Shows lots of white stuff and colors switching jelly-like.. But still it doesn't work.
3. TAB360-364_Android_411_Jelly_Bean.img -> This is the official A10 Jelly Bean firmware for Yarvik TAB364 GoTab Gravity 8".. No wonder I still got back to the blank screen issue. I only notice the back light turn on and off following the pattern of normal functionality, only I'm not able to actually see it..
Well, at least I'm still able to keep flashing roms to it.. Any ideas?
I can't even find my stock rom to turn back to 4.0.4. Where exactly is it located in my recovery-mode backup?
Btw, in case it plays any part my tablet is 10.2''.
Any help would be greatly appreciated.
EDIT : Finally I figured it out! My correct stock rom is : sun4i_crane_bc1003.img
I found it through google and after flashing to it I managed to get my tablet at a working state. (ICS 4.0.4 ICS 4.0.3)
So, I'll now try to use more Jelly Bean roms without worrying about bricking it.
Oh, something I noticed that might help others too.. even though on the packaging it says Flytouch Superpad 8 Allwinner A10 this tablet model (BC1003) is actually the Flytouch Superpad 7 and that helped me find my correct rom. Keep that in mind from now on. I'll keep you updated if I succeed in booting to Jelly Bean.
Finally some success..
Well, I finally have some interesting updates on the subject.
I managed to get Jelly Bean to work (Versions 4.1.2 and 4.1.1) on my BC1003 tablet without a compatibility pack (still none has worked for me).
Details on 4.1.2 Version :
Rom File Name : AOKP-4.1.2-3.0.52-Revb.zip
System running smoothly with wifi working fine.
Sound is fine and no crashes occurred.
Touchscreen, screen rotation and camera do not work.
I noticed that I can't browse to my external sd card.. it doesn't seem to get mounted.
Details on 4.1.1 Version :
Rom File Name : cm10_a10_20120913.zip
System running extremely smooth with wifi working fine.
Sound is fine and I experienced no crashes.
Touchscreen, screen rotation and camera do not work.
Also could not mount my external sd card.
Important bug noticed : When I try to change the brightness of my tablet's screen it enters suspended mode no matter what I do and is not fixable. I had to reflash the rom to recover from that state.
I think most of the problems would go away if I found a compatible jelly bean compatibility pack for this tablet.
If anyone has any clue please let me know.
So far I've tried these with no luck :
t05a-v3_compatibility_1.2.0.zip
t05a-unk_compatibility_1.2.0.zip
907c_compatibility_1.2.0.zip
By the way the BC1003 ICS rom that I found to be working was actually not my manufacturer's and it was version 4.0.3 instead of 4.0.4 that my original one was.
So, @fldave612 if it's possible could you please backup and upload yours somewhere so that I can also have it?
EDIT: Actually I figured out that I had kept a good backup form my ICS 4.0.4 using clockwork backup/restore and switched back to that for now.
But I've kept a backup of my Jelly Bean installation too so it's very easy to switch to that now. I'll try again once we get a compatibility pack working.
I feel we're very close to completely upgrading to Jelly Bean now on this tablet. We only need a working compatibility pack.
How did you succeed to install these ROMs, I tried both, installation went OK, but after reboot, only black screen......
Sent from my GT-P5110 using xda app-developers app
baschelik said:
How did you succeed to install these ROMs, I tried both, installation went OK, but after reboot, only black screen......
Sent from my GT-P5110 using xda app-developers app
Click to expand...
Click to collapse
I just installed them without a compatibility pack. It's not the jelly bean build that fails.. it's just the compatibility pack.
I researched it a bit and starting to look for a compatibility pack that works on very similar tablets (10.2'' - 1024 x 600 - 1GB Ram).
I found some, and got it to boot without a blank screen. Some showed messy colors others seemed to be working fine but still no touch..
So until we get one working on our specific precious tablet, we're kinda stuck here..
The 4.1.2 version seemed to be working fine but without touchscreen it's pretty much useless.
We could live without a camera or screen rotation, but not without touchscreen..
I even figured out that I could browse to the external sd card by going to root and then storage folder.. instead of mnt..
Actually now I'm stuck with ICS 4.0.3 since the original backup I kept proved to not be working fine.. it kept on crashing all the time..
So if someone has the original BC1003 ICS 4.0.4 that came from the manufacturer please upload it somewhere and post a link here.
Also if someone works on it to create a touchscreen driver for the world would become more beautiful..
Go to this link: http://www.maixin-china.com/software-download.asp Scroll down about half way and go to the link for "MaPan F10B (Cortex A8 Flytouch 6 and Flytouch 8) Software". I used the newest one 11-28.
This is a firmware is the one for this tablet. Use Livesuit to flash it, it will restore the tablet back to 4.0.4 factory.
It is virtually impossible to brick an A10 tablet from what I'm reading because it can be flashed via usb and have to boot loader re-imaged.
This link is very helpful to flash via Livesuit: http://elinux.org/Hack_A10_devices
Hope this helps you all as much as it did for me. Hopefully in the near future some developers will build a CM10 or higher version that will work on this tablet, until then I'll use this rom with Clockwork recovery mod.
Moin @all
Ich have chrashed my tab too but the download link is dead.
Any ideas where ich can load the file ?
Sorry for my ****ty bad English :silly:
Gothfather
I've also got this tablet (BC1003) - thank you for all the useful information posted on this thread so far.
If I've understood correctly, it's possible to install custom firmware using LiveSuite but at the moment none of them fully support this tablet - is that right?
At the very least I'm looking for a way to increase the size of the internal memory partition - the stock partition table has this unnecessary virtual sdcard partition taking most of the 2GB internal memory...
i have one of these damn slow tablets
i watched a vid on youtube about how to remove the internal sd card it is so simple to do it only take like 3 mins and 7 screws ive done this and put a 16gb card in there
i cant post a link but heres the name of the vid "Flytouch 5 / Superpad 6 V10 - Disassembly - Access to internal TF"
it is not the same tablet but is pretty much the same
Tip use a knife to pop the caps off the outside i found this easier
try not to stab yourself.
thanks if i helped you out
noob
okay so i tried to install a new rom on my allwinner a10 bc1003 and ended up only booting a black screen i dont know what im doing as this is my first tablet an very little computer knolage but im interested i had seen in a post he used livesuit to flash the new rom.... i dont understand how that works if anyone could sit down and teach me that would be apriciated
---------- Post added at 12:21 PM ---------- Previous post was at 12:16 PM ----------
SolidSnakeGr said:
Actually it's not entirely bricked.. well I finally got it to work with LiveSuit 1.09 and managed to flash its firmware to a couple more roms.
1. sun4i_crane_t05a_20120409.img -> Ends up showing some messy stuff on the screen. Looks like the resolution is not correct.
2. sun4i_crane_futekoA90universal_20120531.img -> Shows lots of white stuff and colors switching jelly-like.. But still it doesn't work.
3. TAB360-364_Android_411_Jelly_Bean.img -> This is the official A10 Jelly Bean firmware for Yarvik TAB364 GoTab Gravity 8".. No wonder I still got back to the blank screen issue. I only notice the back light turn on and off following the pattern of normal functionality, only I'm not able to actually see it..
Well, at least I'm still able to keep flashing roms to it.. Any ideas?
I can't even find my stock rom to turn back to 4.0.4. Where exactly is it located in my recovery-mode backup?
Btw, in case it plays any part my tablet is 10.2''.
Any help would be greatly appreciated.
EDIT : Finally I figured it out! My correct stock rom is : sun4i_crane_bc1003.img
I found it through google and after flashing to it I managed to get my tablet at a working state. (ICS 4.0.4 ICS 4.0.3)
So, I'll now try to use more Jelly Bean roms without worrying about bricking it.
Oh, something I noticed that might help others too.. even though on the packaging it says Flytouch Superpad 8 Allwinner A10 this tablet model (BC1003) is actually the Flytouch Superpad 7 and that helped me find my correct rom. Keep that in mind from now on. I'll keep you updated if I succeed in booting to Jelly Bean.
Click to expand...
Click to collapse
okay im sitting at this point but i dont understand the flashing with livesuit
With the Windows utility "Phoenix Card" it is possible to burn the MaPan image mentioned above to a micro SD card. After inserting the micro SD card into the tablet and booting up the image will be flashed onto the tablet, indicated by a progress bar and a ticking sound.This works for our tablet, and should work for firmware for several Allwinner A10 and A20 tablets plus some other processor families (vimicro?).
where can i get Windows utility "Phoenix Card"
cant find 1 that works the inside says Yones toptech BC 1003 all winers A10
flusspferd said:
With the Windows utility "Phoenix Card" it is possible to burn the MaPan image mentioned above to a micro SD card. After inserting the micro SD card into the tablet and booting up the image will be flashed onto the tablet, indicated by a progress bar and a ticking sound.This works for our tablet, and should work for firmware for several Allwinner A10 and A20 tablets plus some other processor families (vimicro?).
Click to expand...
Click to collapse
hi ... i have a Yones toptech BC 1003 all winers A10 (superpad 8 / flaytouch) that im trying to fix...
after 3 days trying every possible firmware, and booting them from external sd card
all i could do was change de logo at boot start from (mapan to kosaco, to oem etc..)
than i had the idea of removing the internal sd card to look at it ...
and guess what it still runs the same with out no sd card in or out
so i thought ... the sd card was never read in the first place cause is damage or corrupted...
so on the 4th day im trying to format and partition the new internal sd card... hoping for the best.
so...
is the firmware installed in a built in memory ??
and how do i format the internall card TF card , and install all the software again
Problems with CWM v6.0.2.8
Sorry to interrupt people, but I'm quite new at this and I guess I made a mess....
I have a Flytouch Superpad VIII with A10 inside (BC1003), which is bricked.
Don't ask me how I got it this way, I guess **** happens.
Downloaded and installed CWM-based Recovery v6.0.2.8 only to find that on the log it cannot mount...
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache recovery/last log
My idea is that I probably used the wrong version of CWM, but if not the case, please tell me.
Anybody know a fix on this?
I've already intalled ADB drivers on my PC and at least I can communicate with my device using ADB.
Any help on unblocking the device and then flashing it would be greatly appreciated
Hey guys,
Have had my Honor 6 H60-L02 FDD-LTE for little under 4 hours now
Already unlocked the bootloader and flashed CWM V.6.0.5.1
I installed the MIUI v4.9.6 Rom and i don't really like it, it keeps coming up saying com.android.phone has stopped, and when you update to v4.12 it gets stuck in a boot loop
So I don't think MIUI is very stable for the phone, and I want to install EMUI v3.0 (This isn't lollipop yet is it?)
Long story short, I figure i have to reflash the stock recovery firmware because CWM wont install an Update.App file
I downloaded the Honor 6 Multitool
When i get to install recovery, i choose my honor 6 model then it asks for EMUI 2.3 or 3.0, i tried all the 3.0's and they dont load the recovery, just go back into android
so i tried some of the EMUI 2.3's, i have no idea what each number at the end represent and which one suits my phone... i.e B118SP02?
So that is what stage im at, i have MIUI v4.9.6 with CWM V.6.0.5.1
And i am trying to install EMUI v3.0 stable
Any help would be pretty awesome, can say im slightly disappointed with the availability of roms for this phone, but hopefully this will change in the future
Ok ...
i will start from beginning , i will tell you how to get the last stable update for your phone .
witch is B310【EMUI3.0_Android4.4】.
First Download it from here it's 1GB .
or from here (you should translate it first and click on stable and download) .
Second continue with this link .
Attention : Do step 6 before 5 .
Or go to
http://forum.xda-developers.com/showpost.php?p=57274153&postcount=1
scroll down to: 3 Button Restore not working (If you change between variant example L02>L12) Or Partition been changes and cannot restore back Stock version. Use this steps below : -
Links to the revert package etc are in the post too
Tried Myahyam's method and now the phone is stuck in a boot loop (shows the honor, powered by android splash, goes black then repeats the splash)
need to unbrick the damn thing now
im following the honor 6 multitools unbrick method, its in fastboot transfering files now, will report back when its done.
Just out of curiosity, besides MIUI and EMUI, what other roms are available to flash using CWM or TWRP?
Okay, managed to get CWM back on and sideload the MIUI4 rom again, just to prove to myself that I didn't brick my phone, so that parts all good!
I will have to try your method another time Julsen, i fly out on a 3 week holiday tomorrow morning, and want to load some games and movies to the phone to watch on the plane.
Hopefully when I come back in 3 weeks, there will be a better choice of roms to install using CWM/TWRK
If not, I will attempt your method Julsen, at least i now know how to fix any softboot/bootloop problems, good learning experience all up!
Here u will find couple of custom roms flashable via cwm
http://bbs.anzhi.com/forum.php?mod=forumdisplay&fid=1387&filter=typeid&typeid=15409&mobile=no
Sent from my H60-L02 using Tapatalk
Help me please!
I am having exactly the same problem that serpent is having.
Did any1 found solution?
Hey all, back from my 3 week trip
@nrpetonr i went to that site and grabbed two roms to flash using CWM, they both seem to put it into a boot loop
This phone is strange really, ever since i have unlocked the bootloader and put on a custom rom, its been the only rom that has worked, the rest all put me into a bootloop
Maybe i should try TWRP instead