I know you're going to say use search function, but everything I keep finding is very complex and difficult, or the downloads are no longer available. And sometimes there's a disclaimer saying that doing it that way could brick the phone. I wanted to try oneclickroot but it doesn't seem to be available at this time. So obviously the question is whether or not there's a (somewhat) simple way to root my GS3. I rooted my Droid Incredible twice and it didn't take more than 5 steps and 10 minutes each time, it appears to be A LOT harder for the GS3, and it's pretty much scaring me out of trying it, out of fear of bricking my phone. Thank you!
It's super easy, just read and follow all of the steps. And there's always a chance of bricking your phone.
I followed this guide and it was very simple and straight forward but I was on ICS. JB is a little different.
http://forum.xda-developers.com/showthread.php?t=1762709
This is for JB: http://forum.xda-developers.com/showthread.php?t=2046439
Raindeux said:
I know you're going to say use search function, but everything I keep finding is very complex and difficult, or the downloads are no longer available. And sometimes there's a disclaimer saying that doing it that way could brick the phone. I wanted to try oneclickroot but it doesn't seem to be available at this time. So obviously the question is whether or not there's a (somewhat) simple way to root my GS3. I rooted my Droid Incredible twice and it didn't take more than 5 steps and 10 minutes each time, it appears to be A LOT harder for the GS3, and it's pretty much scaring me out of trying it, out of fear of bricking my phone. Thank you!
Click to expand...
Click to collapse
There is only one way to root jb at this time. Bob linked you to the post. It really is not as hard sf out looks, Judy follow the steps and you'll be fine. One tip make sure you unplug before trying to boot into recovery
If I helped you in some way.... pass on the favor and help the next person!
I went from rooting my droid incredible to rooting this phone and while it is slightly more complicated, if you have a pc there's really no reason you can't do it by just following the instructions.
Raindeux said:
I know you're going to say use search function, but everything I keep finding is very complex and difficult, or the downloads are no longer available. And sometimes there's a disclaimer saying that doing it that way could brick the phone. I wanted to try oneclickroot but it doesn't seem to be available at this time. So obviously the question is whether or not there's a (somewhat) simple way to root my GS3. I rooted my Droid Incredible twice and it didn't take more than 5 steps and 10 minutes each time, it appears to be A LOT harder for the GS3, and it's pretty much scaring me out of trying it, out of fear of bricking my phone. Thank you!
Click to expand...
Click to collapse
Odin is really not as scary as it seems. It's actually a pretty straight-forward, easy procedure once you have the hang of it. Just remember that everything on GS3 is flashed in the "PDA" section of Odin.
pdykstra said:
Odin is really not as scary as it seems. It's actually a pretty straight-forward, easy procedure once you have the hang of it. Just remember that everything on GS3 is flashed in the "PDA" section of Odin.
Click to expand...
Click to collapse
This!
If I helped you in some way.... pass on the favor and help the next person!
bobAbooE said:
It's super easy, just read and follow all of the steps. And there's always a chance of bricking your phone.
This is for JB: http://forum.xda-developers.com/showthread.php?t=2046439
Click to expand...
Click to collapse
So I could brick my phone even if I follow the instructions perfectly? :\ That seems like a huge risk. Would that be covered under warranty lol?? I just got this phone a week ago.
And I have a few questions before I start. Where on my phone do I put the superuser and bootloader folders? The root of the phone? Or in a specific folder? And when I run the Samsung USB driver folder one of them keeps failing. It's called SAMSUNG_ANDROID_SCH-i535. Here's the error message. http://imgur.com/Z3RRp. My device isnt getting unplugged and it always fails. I tried 3 times.
I had issues installing the drivers too. I installed kies then connected my phone. After that all went smooth I re tried flashing via Odin and it worked perfectly. FYI I ran it on my wife's win vista 64bit system tho Odin runs fine on any current-ish windows.
Sent from my SCH-I535 using xda app-developers app
jndd333 said:
I had issues installing the drivers too. I installed kies then connected my phone. After that all went smooth I re tried flashing via Odin and it worked perfectly. FYI I ran it on my wife's win vista 64bit system tho Odin runs fine on any current-ish windows.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I installed Kies and I'm still getting the device unplugged error. :\
And do you know where I would put the folder for the superuser and bootloader on my phone?
Edit: Nevermind I tried it again, but this time I waited 5 minutes after the error, not intentionally, I just never closed the box. And it starting downloading it again in another slot and then it worked...SCH-i535 Successfully Installed. Yay.
But I still need clarification on where to put the Bootloader and superuser files on my phone. Do I need to put them in downloads? Or in the root of my phone like on my old Droid Incredible. I don't wanna mess that part up.
I had them in my external card root directory. However it's doesn't really matter where you put the zip files as long as you know where you put them when you go to flash it. During the flashing process it installs them in the correct directory.
I'm new to the GS3 on Verizon, just got the phone Thursday, was rooted that night. Granted I'm coming from Sprint's GS2 so I'm familiar with Odin, however, just as pdykstra said, it's not as scary as it seems.
Related
http://forum.xda-developers.com/showthread.php?t=850898
Anyone try this and have it working? Suggestions?
Yes. It works as advertised.
droidroidz said:
http://forum.xda-developers.com/showthread.php?t=850898
Anyone try this and have it working? Suggestions?
Click to expand...
Click to collapse
If you have problems with moving files, you can use Root Explorer to move them. Watch out for typos on the last step. Other than that, it definitely works. I have done it many times.
idk..
I did this, and everything worked up to the last step.
It read no errors, but nothing worked.
I figured out that it didn't actually create the directory, so I created it with rootexplorer, copied the file in, and then when i restarted my phone was bricked D:
I've since exchanged it, but I'm gonna hold off for official support before I try again.
vluhd said:
I did this, and everything worked up to the last step.
It read no errors, but nothing worked.
I figured out that it didn't actually create the directory, so I created it with rootexplorer, copied the file in, and then when i restarted my phone was bricked D:
I've since exchanged it, but I'm gonna hold off for official support before I try again.
Click to expand...
Click to collapse
You probably jumped the gun there. These phones are actually pretty hard to truly brick unless you flash something to the "phone" in Odin. What directory were you creating? All of the directories that you are trying to work with are already there. All you have to do is put two files on your sdcard, move one of them to /system/xbin and then flash flash the other. I've done this probably 50 times in the last month and with the exception of a typo the very first time, I haven't had a single problem.
Don't use SuperOneClick... I had problem after problem when I used it to root. "de-rooted" (not sure that's a word) it with SuperOneClick then used Z4root. Everything worked perfectly after that. Also I was making a mistake when trying this step I think - "adb push path/to/recovery.bin /sdcard/recovery.bin" I was stupidly starting adb shell first then trying to run adb push. Hope that helps some.
I am debating rooting also, just a bit hesitant and reading everything i can for now. Which is the best root method so far as i can tell there about 20 different variants.
droidroidz said:
I am debating rooting also, just a bit hesitant and reading everything i can for now. Which is the best root method so far as i can tell there about 20 different variants.
Click to expand...
Click to collapse
Everyone has their own favorite. Personally I use both SOC and Z4, depending on where I'm at. I've never had a problem with either. Good choice, though, reading everything that you can find.
droidroidz said:
I am debating rooting also, just a bit hesitant and reading everything i can for now. Which is the best root method so far as i can tell there about 20 different variants.
Click to expand...
Click to collapse
i dont know what you are reading but with regards to the US Cellular Samsung Captivate there is O N E method and really only 1 method.
SuperOneClick 1.55 which can be downloaded right here at XDA.
its pretty friggin dummy proof really.
And just incase you were thinking rooting gets you everything (like 3 of my coworkers) rooting just unlocks the door, its up to you whether you want to walk thru and start installed and flashing mods but jsut to ROOT the phone allows you to do things not being rooted will not.
v_lestat said:
i dont know what you are reading but with regards to the US Cellular Samsung Captivate there is O N E method and really only 1 method.
SuperOneClick 1.55 which can be downloaded right here at XDA.
its pretty friggin dummy proof really.
And just incase you were thinking rooting gets you everything (like 3 of my coworkers) rooting just unlocks the door, its up to you whether you want to walk thru and start installed and flashing mods but jsut to ROOT the phone allows you to do things not being rooted will not.
Click to expand...
Click to collapse
Actually I SOC didn't work well for me. z4 worked perfectly on my Mesmerize. I had problems with SOC.
icantplay said:
Don't use SuperOneClick... I had problem after problem when I used it to root. "de-rooted" (not sure that's a word) it with SuperOneClick then used Z4root. Everything worked perfectly after that. Also I was making a mistake when trying this step I think - "adb push path/to/recovery.bin /sdcard/recovery.bin" I was stupidly starting adb shell first then trying to run adb push. Hope that helps some.
Click to expand...
Click to collapse
my friend no offense, but if you had problems with superoneclick then you got problems.....
the biggest problem is the creators instructions, he tells you to disable usb debugging then to enable it when it says waiting for device... to bad you cant because the usb cable is plugged in and you cant do anything like that when the cable is plugged in.
i leave debugging enabled because it needs to be on to run the root.
30 seconds later i am rooted,, easy as that.
It's totally cool that it worked for you.
I'm just saying that I followed the instructions of SOC (not that there are any instructions, you just click on the big ROOT button) and then tried to install Clockworkmod.
I could not get anything to work properly. I then used z4 and it worked.
I'm happy to hear that it worked for you though but "I have no problems" not sure why you have to go there.
You realize that there are lots of reasons why something may work on your phone and not mine right? Also if you want to get picky you called it the US Cellular "Captivate". If it's from U.S. Cellular then it's the "Mesmerize". Maybe that's why SOC worked for you and not me...
I also had problems with the SOC method of rooting my Mesmerize... It looked like it worked but the method for flashing CWM wouldn't work. Kept getting access denied errors. Z4root worked like a charm though. Don't know why, don't especially care either way.
Sent from my Samsung Mesmerize using XDA App.
Does z4root install superuser.apk and buysbox? Also with z4root which version of superuser.apk does it install, I noticed the creator has updated the apk recently here:
http://forum.xda-developers.com/showthread.php?t=682828
Will (auto) root & unroot. Work for the new ota 605.7 update for the HTC thunderbolt
My friend wants to root the easy way ....NEED HELP will auto root work or not ...
sent from my rooted tbolt using XDA app
Yes but he should use the manual as most soft bricks occur with auto root.
Sent from my ADR6400L using XDA App
miketoasty said:
Yes but he should use the manual as most soft bricks occur with auto root.
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
This. I don't trust "auto" roots.
The manual, ADB method is proven and not NEARLY as difficult as it may seem up front. You just have to follow the steps in jcase's thread, and you'll be done in half an hour. It's at least worth reading through.
TheStick13 said:
This. I don't trust "auto" roots.
The manual, ADB method is proven and not NEARLY as difficult as it may seem up front. You just have to follow the steps in jcase's thread, and you'll be done in half an hour. It's at least worth reading through.
Click to expand...
Click to collapse
Completely agree. You don't even need to learn adb to use it it's all just copy and paste.
Sent from my ADR6400L using XDA App
i was trying to root my friends phone with captains script which holds your hand...
I came across a problem... when trying to flash the downgrade pcimgfile... kept saying "Main version older, update failed"
As per him, he has not flashed anything on his phone, everything is stock andhe got his phone about a month after i did (for it launch day). The script was able to push the files and all seems good, but i have not been able to pin point whats causing the error. (i didnt get to take a screen shot with the firmware and stuff) Ive rooted 2 phones without issues with the script and on this particular phone, it seems to be working fine until i try to flash the update.
will using adb manually help in this case? I am thinking no.... but if anyone encountered this, mind sharing what you did?
I have not had any issue with the script. Its similar to the JCase's method it just issues the commands for you. Capt includes a copy of the commands the scrips runs in his thread so I found it helpful to look at it while I ran the scrip so I knew what it was doing and when. Like any set of instructions its always good to read through it all once before you preform it so you know what to expect. If you just download everything, click start, and expect it all to run smoothly then you are likely to run into problems.
JCase's method is good to learn off of tho and might be easier for people to pin point where errors occur.
The error i am seeing is with the phone itself. I think something may have gotten updated?
the script its doing its job. I also reboot my pc and did a factory restore.
Well Capt's script says it only works with software version 605.6 or 605.9 which I assume from when it was written means 1.12.605.6 or 1.12.605.9. If the phone your using is using software version 1.13.605.7 then you should use JCase's method here
The software is 1.12.605.6
Could it be Jcase maybe also updated the downgrade img file?
That first step is causijg the problem when i try to downgrade (the first time you flash the img file)
*looked at the thread and also went to the original thread, file md info is the same for the ruu on both posts **
I also have all the original exploit files on my pc from when i rooted MY phone... since he had a software version that was on the original root threads, i didnt have to change anything
This may be an issue you would want to ask in the chat room that there is a link to in the Development section. If you look at the scripts contents as well as the manual instructions from JCase they are exactly the same up the the point you are getting stuck at. The MD5's even match. So I wouldnt expect doing one method over the other would solve your problem. Maybe someone on the chat could help you out tho.
yeah... im gonna have to go in there....
Its the same software as mines. I didnt modify any files on my pc.... it should have just worked. thanks for the feed back. Guess i will try when i get home later and have more time to mess with it.
So I had an issue in hboot, i am not sure if something was unconnected or what but i think i am in a bootloop.
It happened during the first round where you unplug you phone, I did and it started to check the sd image and had the expected no image error message.
after it checked them all the phone displayed a error message the the "main version is older" that "update failed" and to press power to reboot.
when i do that it takes me to another screen. I think its the fastboot screen and my only options are bootloader, reboot, reboot bootloader, power down. All of which lead me to the same problem and no way that i can figure out.
I found this while searching for a fix, would i be able to pull the sd card, flash the update, and start over again? (albe it with a different root program)
Thank you before hand for your help.
Hey everyone!
I'm finally glad to say that i have oficially become am Infuse owner and android junky! My buddy was able to get me the Infuse while in NY after many other attempts and heartbreak...
This thing is amazing! My first android phone and I love everything about it so far. Too be honest, the size isn't nearly as uncomfortable as i thought it could be. Feels great in the hand, bit slippery thought.
The next step is to unlock the sim which I believe i need to root it first yeah? When i root the device will change to vanilla Froyo or will touchwiz still be there? What will i lose in regards to apps and widgets and things like that?
I have seen two posts regarding rooting and sim unlocking so far. This is my first adroid device so this process is quite new to me. Would you all point in the right direction for which you believe is the best newb friendly for to root and sim unlock. I will be doing this first thing after work on Monday.
Thanks for all the helps as always!
I'm sooo excited...
First things first....
Find and download the latest Samsung Kies and install....this will give you the latest drivers to root using super one click...
Sent from my Samsung Infuse 4G
Thanks!
When i plugged the device to my computer I saw that there were 3 options: Mass storage, media, and somthing about Kies. Do i need to download this on the device or on my computer? And then would i select the Kies option when connecting it to the computer? I know this all newb of me, but i do appreciate all the help.
you need to google kies find and install with out it you cant really root.
then head over to Android development and download both the root and unlock since you need it unlocked.
as regards for losing apps or touchwiz, they still will be there.
Heuser1 said:
Hey everyone!
I'm finally glad to say that i have oficially become am Infuse owner and android junky! My buddy was able to get me the Infuse while in NY after many other attempts and heartbreak...
This thing is amazing! My first android phone and I love everything about it so far. Too be honest, the size isn't nearly as uncomfortable as i thought it could be. Feels great in the hand, bit slippery thought.
The next step is to unlock the sim which I believe i need to root it first yeah? When i root the device will change to vanilla Froyo or will touchwiz still be there? What will i lose in regards to apps and widgets and things like that?
I have seen two posts regarding rooting and sim unlocking so far. This is my first adroid device so this process is quite new to me. Would you all point in the right direction for which you believe is the best newb friendly for to root and sim unlock. I will be doing this first thing after work on Monday.
Thanks for all the helps as always!
I'm sooo excited...
Click to expand...
Click to collapse
Kies will install like an iTune kinda thing, but doesn't work for now on infuse st the same time install the infuse windows driver, if yoi just want to install the samsung infuse driver just go to, http://www.junefabrics.com/android/driver.php scroll down and click the samsung
Sent from my SAMSUNG-SGH-I997 using XDA App
read the whole thread on unlocking. it may print the wrong line and not give you the proper unlock code. you may need to use adb to find it through instructions found in the thread. also you will need the usb drivers which will install with kies (unless you are on a mac then you dont need drivers for usb devices) but if you find the samsung drivers without kies that might be better.
when you root it will still be touchwiz. touchwiz is hard to get rid of, not that there is a point, it isnt a bad ui.
i actually used this to root and unlock. i subsequently tested it with a Tmob sim and it worked great.
http://forum.xda-developers.com/showthread.php?t=1081072
but yeah, get the drivers first and then follow the instructions and you'll be well on your way to freedom!
Downloaded Kies
Dowloaded superoneclick v 1.9.1
When i open superoneclick, i have a few files like root, adb, driver...etc. There is also one that says superoneclick, do i click on this one and extract?
EDIT: I saw the other thread posted by lost1 that uses the Rage against the cage method. This has a root and unlock paired together which i'm thinking might be an easier way to go.
Heuser1 said:
Downloaded Kies
Dowloaded superoneclick v 1.9.1
When i open superoneclick, i have a few files like root, adb, driver...etc. There is also one that says superoneclick, do i click on this one and extract?
EDIT: I saw the other thread posted by lost1 that uses the Rage against the cage method. This has a root and unlock paired together which i'm thinking might be an easier way to go.
Click to expand...
Click to collapse
Well do the unlock too my man.
Sent from my SAMSUNG-SGH-I997 using XDA App
im not the most computery savy person around... I have looked at both methods and cant really decide which one will probably be easiest..., or more idiot proof. going to try one as soon as I get home from work. hope all goes well and I dont brick my phonr or something like that. thanks for helping.
Unlocked Infuse in 10 min
The Infuse is my first smartphone ever and im getting used to it too. I read about rooting and such and decided to do it. I used the super one click method and it was easy. I just downloaded and installed kies which recognized my phone then ran the superclick program and it was done. super easy. dont think it unlocked the sim but im not worried about that though.
I think I'm finally giving up on getting my thunderbolt running the way it should, what's the best way to root the thunderbolt at this time?
Software Version: 1.70.605.0
I just rooted my first Thunderbolt 2 days ago easily. Just google randomtek thunderbolt root.
Do yourself a favor and use the Revolutionary method. If not that, do the ADB method. If bricking your device and having no support for it interest you, find one of the one-click methods. Those do a very good job bricking devices or leaving the user totally screwed.
I like the old adb method because its easier to go back to stock for replacements, and revolutionary took almost as long because I had to keep entering my info to get a key that worked.
Revolutionary worked flawlessy for me (once I figured out what the hell I was doing)
Revolutionary is the easiest.
Sent from my Galaxy Tab 10.1
I did mine one of the one click methods and here I am 5 months later not bricked
Sent from my T-bolt using XDA App
thoward93 said:
I did mine one of the one click methods and here I am 5 months later not bricked
Click to expand...
Click to collapse
They do work for some people but they have a very high rate of failure compared to other methods. I would recommend the adb method or revolutionary, I personally like adb because I have to revert to stock on a weekly basis.
jbh00jh said:
Revolutionary is the easiest.
Click to expand...
Click to collapse
Agreed! Worked great!
Could someone please school me on this...but isn't the oneclick method pretty much the same as adb. only difference is that adb you have to manually type the commands and push the files to the phone. thanks.
amahabir said:
Could someone please school me on this...but isn't the oneclick method pretty much the same as adb. only difference is that adb you have to manually type the commands and push the files to the phone. thanks.
Click to expand...
Click to collapse
The problem is without taking apart the script and finding out exactly what it's doing and what files it's supposed to be using, you can't tell if it works. Most of the one-click scripts came out before RUU 1.70. Forget it if you're devices is updated to RUU 2.11 GB. More of them will **** your device up than root it if you're on that update. We have a stickied thread on this subject in development by a guy who invented the ADB root method for the Tbolt. Every one-click script is based off of that, however his guide and files have changed over time to work with all the OTA's. The one-clicks don't keep up with it, and there's no way to know until you take the script apart. I've helped too many people try to recover from these stupid, lazy-ass one-click cop-outs on doing it right to help one more fool who's read what I've written and done the opposite.
So.... Basically, if you want a root method with support, you're going to use ADB or Revolutionary. Pretty simple.
Ahhhh, I see. the next one i root, i will definitely use adb then...thanks man.
I now feel like i've dodged a bootloop bullet.
thoward93 said:
I did mine one of the one click methods and here I am 5 months later not bricked
Click to expand...
Click to collapse
It won't brick it later ! It's during the process that the risk of bricking it is higher. If it works, all is well.
I used revolution for the 1st time this week on a restored stock Tbolt. It worked great for me and was much faster than ADB.
The only thing I dont like is the new blue text on black screen that gets loaded for CWM. I find this hard to read compared to white text on a black screen.
You can replace the recovery console that they link to. I have to agree with you too, blue text on black background is not the easiest thing to read.
I did my first root a few days ago with revolutionary.io. I've been reading on rooting my bolt for quite awhile. I decided to wait until the GB OTA then work on the root process. I was one of the few who received the OTA and was extremely unimpressed!
I was amazed at how easy it was to gain s-off. I was nervous at first taking the plunge. Now that it's done I've flashed 2 different roms. Currently using synergy 262 and thoroughly enjoying it.
I have a biased opinion since I've never tried "one-click" or ADB. However, revolutionary works, easy to understand, and it's also easy to revert to stock it needed.
Went with synergy yesterday... love it so far
Thanks everyone I was able to get root with revolution, but then had to make the connection to download rom manager or how to load from the new bootloader.
Running BAMF right now, meh it's ok but was expecting more from what I felt people were so hyped up about.
i rooted my phone but now i can't install roms. and there's a verizon update that keeps auto-updating on my phone and that **** ****s it up
Will Revolutionary work with the new GB OTA installed? If not, what will? I am fed up with these uninstallable apps eating my battery.
Ok so I'm very new to the whole root business, and I only rooted my phone so I could use my ps3 controller via bluetooth which would then allow me to charge my phone at the same time. Got all that working and I was pretty much done with anything root related. That was two days ago. About an hour ago I decided, hey, why not see what I can do with my phone now that it's rooted. So I download the ROM manager and titanium backup. I found a ROM that I think I've heard people talk about before called Cyanogen Mod and I download the stable version of that and I went into ROM manager and I installed it there, it went through the reboot into recovery and everything. At least I thought it worked. It rebooted and I really didn't see anything different. So I manually went into recovery mode and installed Cyanogen from my sd card and rebooted my phone. However, it didn't reboot. It took me to a screen with a yellow triangle that says Verizon found software it doesn't authorize and I should take my phone to the nearest verizon store. It displays this everytime I try to boot my phone. All I can do is boot into ODIN mode. Please someone help, I'm at a loss as to what I should do.
All I can tell you is that you did not unlock your bootloader. You can fix this, but you're going to
have to do the work. Read about Odin.
Well, I read around and It told me to flash the Jellybean 4.1.2 thing to re-root my device and unlock the bootloader in the process. The heading was, If I rooted my device and forgot to unlock and now am getting a yellow triangle, so that seemed like what I needed. I flashed with odin, it said it passed and it auto rebooted my phone, but it still came up with the triangle.
I never said anything about flashing files with Odin.
I just said to read about it.
That's all I'm going to say...read.
"it" told me not "you" told me. All you said to do was read, so I did. I found something that seemed to be similiar to my problem, so I tried it out. It didn't work, so I put it here for more information, just in case someone has an idea on what might be wrong.
Brontis said:
"it" told me not "you" told me. All you said to do was read, so I did. I found something that seemed to be similiar to my problem, so I tried it out. It didn't work, so I put it here for more information, just in case someone has an idea on what might be wrong.
Click to expand...
Click to collapse
Unlock your bootloader! Same thing happened to me.
Try this threadhttp://http://forum.xda-developers.com/showthread.php?t=2199042&highlight=system+software&page=2
kmsck5 said:
Unlock your bootloader! Same thing happened to me.
Click to expand...
Click to collapse
AS RipRip said...read. Do your homework no matter how long it takes to gain knowledge. I took a month to learn what to do with everything. I'm still learning. If you feel uncomfortable with anything don't mess with your phone.
My intention is to offer hints without just handing the solution to you
I'm not sure if the link I posted is working. If it is you should find help there.
If its not working just google your situation, ie. " system software not authorized..."
RipRip said:
My intention is to offer hints without just handing the solution to you
I'm not sure if the link I posted is working. If it is you should find help there.
If its not working just google your situation, ie. " system software not authorized..."
Click to expand...
Click to collapse
Ditto same here!
Brontis said:
Well, I read around and It told me to flash the Jellybean 4.1.2 thing to re-root my device and unlock the bootloader in the process. The heading was, If I rooted my device and forgot to unlock and now am getting a yellow triangle, so that seemed like what I needed. I flashed with odin, it said it passed and it auto rebooted my phone, but it still came up with the triangle.
Click to expand...
Click to collapse
I can tell you are new as you rooted your phone twice and STILL didn't unlock the bootloader. It makes sense to ask us how to unlock the bootloader since that is the problem in the first place. Also it is a stupid idea to take a rooted phone to Verizon as you just voided your warranty by rooting your device which is why you read before altering the software of an expensive device.
jmxc23 said:
I can tell you are new as you rooted your phone twice and STILL didn't unlock the bootloader. It makes sense to ask us how to unlock the bootloader since that is the problem in the first place. Also it is a stupid idea to take a rooted phone to Verizon as you just voided your warranty by rooting your device which is why you read before altering the software of an expensive device.
Click to expand...
Click to collapse
Yes, it is pretty obvious that I am new. If all I have to do is unlock my bootloader, then is there somewhere you can point me so I can work on that? I'm just having some trouble figuring out how to unlock it with only being able to boot into ODIN mode.
Brontis said:
Yes, it is pretty obvious that I am new. If all I have to do is unlock my bootloader, then is there somewhere you can point me so I can work on that? I'm just having some trouble figuring out how to unlock it with only being able to boot into ODIN mode.
Click to expand...
Click to collapse
which root method did you use? As all pretty much give you instructions to unlocking the bootloader. If you use the Odin method then you didn't follow the method to the T as you are SUPPOSE flash a file provided that unlocks the bootloader. In one of your posts you said the following "Well, I read around and It told me to flash the Jellybean 4.1.2 thing to re-root my device and unlock the bootloader in the process" That is basically one of the root methods so no I won't point you the right direction as you already found it. Oh and please follow directions carefully.
Look I can tell you are pretty frustrated. So i am going to be a little bit nicer than the guys above. First make sure your phone is fully charged. This is very important. The first link is Odin. load that on your computer. Make due you have Samsung drivers. The 2nd link is to unlock your bootloader. It gets flashed via odin. Make sure you load the file via the PDA button in Odin. After the flash your phone will reboot automatically. This should get u up and running. If it doesn't you will need to follow the instructions for the last 2 links I posted below. This last 2 links flashes stock and shows you how to root and unlock your bootloader. I know the guys above want to u to learn how to do this stuff on your own but many people seem to forget that some people that come in here are not as tech saavy as they are. But be warned. You MUST read ALL instructions to the letter BEFORE starting the process. This is to educate yourself. Remember u need Odin and the Samsung USB drivers installed
Odin: http://goo.gl/ASdXg
Unlock Bootloader: http://open1your1eyes0.cnlson.com/VRALEC.bootchain.tar.md5
Stock 4.1.2: http://hotfile.com/dl/233201455/b70504c/VZW-I535VRBMF1-20130627174111.zip.html
Root + Unlock: http://forum.xda-developers.com/showthread.php?t=2046439
Sent from my SCH-I535 using Tapatalk 4
Well I finally managed to fix it. It was after I read the post above, but it works now. I want to thank everyone who posted in here offering advice.
It may not have been the most sophisticated way to do it, but I basically flashed a stock image of jelly bean 4.1.2 onto my phone, and then factory reset it. It's fine by me that I lost my data, (the only annoying thing is all the game saves) and I'm just glad I'm not going to have to go through the awkward process of explaining how I voided my warranty to my parentals.
Again, thank you all.