Related
So I'm in the process of helping a friend root his G1, but it refuses to let me copy the DREAMIMG.nbh file over, I get the error show in the title. I've researched in and googled in, but didn't find anything in correlation to the g1.
I can copy this to my own g1 with ease, but anytime I try to do it on his, it doesn't let me. I can copy other files but the dream is just being a pain. I've tried copying it via USB mounting, putting the MicroSD into a SD convertor and trying it on another computer, I've tried re-downloading it, and so on. No luck what so ever.
The computer I've tried most of it on I am running Windows 7 64-bit, and the other is Vista 32-bit.
Any ideas?
tehseano said:
So I'm in the process of helping a friend root his G1, but it refuses to let me copy the DREAMIMG.nbh file over, I get the error show in the title. I've researched in and googled in, but didn't find anything in correlation to the g1.
I can copy this to my own g1 with ease, but anytime I try to do it on his, it doesn't let me. I can copy other files but the dream is just being a pain. I've tried copying it via USB mounting, putting the MicroSD into a SD convertor and trying it on another computer, I've tried re-downloading it, and so on. No luck what so ever.
The computer I've tried most of it on I am running Windows 7 64-bit, and the other is Vista 32-bit.
Any ideas?
Click to expand...
Click to collapse
Try reformatting his microSD card. If that doesn't work, try redownloading and confirming the md5 sum.
amgupt01 said:
Try reformatting his microSD card. If that doesn't work, try redownloading and confirming the md5 sum.
Click to expand...
Click to collapse
I have multiple times. Still no go.
Hi,
This is the correct spelling of the file.
DREAIMG.nbh
Try that.
I would get errors nonstop when I transfered things over usb 1.1. Make sure you plug it into a usb 2 slot.
let him use your SD card for the rooting process since yours worked, also try using a windows xp machine.
I been trying to format my sdhc 4gig, the problem is i'll right click format and it gives me a window stating that i have to enter a disk in the F: drive. . .
Basically I took it step by step.
a. plug in the usb from my comp to my phone
b. mount the phone through the notifications tab
c. navigate to "My Computer" and find the removable disk drive right click and format then i will get the message "there is no disk in the (F drive please insert a disk and try again)
I honestly don't know whats going wrong here
can it be the recent update of android 1.5 to 1.6 the "BIG" transition from cupcake to -_- failnut lol. . . .
So what have done wrong?
Is there a solution to this mess?
and yes I did use the search button. . . .
Google 'Flash Format' (by cnetx). Download the demo, install on your pda, and format that way. Trust me, it'll work. If you like it, buy it.
Farmer Ted said:
Google 'Flash Format' (by cnetx). Download the demo, install on your pda, and format that way. Trust me, it'll work. If you like it, buy it.
Click to expand...
Click to collapse
Well that didn't work. Downloaded what was necessary, connected my phone to the pc. Now it's just stating that the phone has to be connected with the pc even though it is. . .
how about formatting it using a card reader? not from your plugged phone.
TheRem said:
how about formatting it using a card reader? not from your plugged phone.
Click to expand...
Click to collapse
Well im trying to find possible ways to do it w/o having to spend money lol.
On the other hand i do have a laptop, it has a card reader but the thing is. . . is that it crashed over a year ago and won't accept the original OS system so i have to use a cracked version. Leading to a problem where i can't use the built in card reader. Which doesn't sound so fun.
If there is any other alternate ways of avoiding a card read and being able to do it with my phone would be awesome, but i can try and find a card reader in the mean time.
Thank you guys for helping. If you have more possible ways please feel free to post more.
try this freeware...
nueStorageManager:
http://www.nuerom.com/BlogEngine/page/nueStorageManager.aspx
nueStorageManager is a control panel applet that lets you control and fine tune storage on your device. It enables you to format, defragment and scan storage on your device, as well as mount and unmount devices.
Warning: Formatting partitions will cause you to lose all device on that partition. Windows CE will prevent you from modifying operating system partitions (IMGFS, XIP) from this tool, but you can still manipulate the FAT32 storage partition with the tool.
lol nothing again.
It's ok i guess lol.
i didn't see that you edited i shall try this one out. thanx for the help again.
lol i just give up. . . until i get a reader.
Imok said:
Well that didn't work. Downloaded what was necessary, connected my phone to the pc. Now it's just stating that the phone has to be connected with the pc even though it is. . .
Click to expand...
Click to collapse
You need to establish an active sync connection, but if you can't get it working try this: go to the C:\Program Files\Microsoft ActiveSync\CNetX\Flash Format folder on your pc. Copy the 'F4.PPCARM.CAB' cab to your ppc and install it the normal way.
I have windows7 on my pc, and when i try to install Rom it just says img not found... Same if i just copy it onto the sd(via usb transfer if it matters)
super2 said:
I have windows7 on my pc, and when i try to install Rom it just says img not found... Same if i just copy it onto the sd(via usb transfer if it matters)
Click to expand...
Click to collapse
If you could give more information about the complete process that you have done, it would be easier for someone to help you.
For example, what is the name of the ROM?
How are you decompressing it?
Are you trying to flash via WMDC or SD Card?
I am also running Windows 7 on my computer and have no trouble at all.
I think it may be something to do with the process you are doing.
Let us know what it is. I'm sure we'll be able to help in some way.
For example, what is the name of the ROM?
How are you decompressing it?
Are you trying to flash via WMDC or SD Card?
It is http_://forum.xda-developers.com/showthread.php?t=536751 this one and i already have installed max sense on the phone, and what to change it tolower ram usage and etc... Tried titantium and sense 2.1 no success. I tried via the usb connection. but cannot locate a device, after it is being rebooted. And then i tried to transfer the divimg.nbh to the sd card and reboot, no success - no image found.
one thing is clear: if you try to install the rom from sd card, your Rom name ("divimg....") is wrong. It should be something like "raphimg.nbh".
How do you establish connection between PC and your TP? There are reported some difficulties connecting your TP with the PC via Windows 7 using device center. Using the search may help...
good luck
Please post [Q] in general section.
borisku said:
one thing is clear: if you try to install the rom from sd card, your Rom name ("divimg....") is wrong. It should be something like "raphimg.nbh".
How do you establish connection between PC and your TP? There are reported some difficulties connecting your TP with the PC via Windows 7 using device center. Using the search may help...
good luck
Click to expand...
Click to collapse
I see, that should be the problem, thank you. Yes i am using the device center.
Divimg.nbh? Where'd you come up with that, lol?
It needs to be named RAPHIMG.nbh. Make sure the extension is correct, and you don't have RAPHIMG.nbh.nbh, or something like that. And the card has to be formatted to FAT32, and the image must be on the root of the card. That's all there is to it. You also need to have hard spl.
It worked just with the normal file.
same problem
Hi there...
I try to flash the new rom on my TP, and:
1) HardSPL is done, I flash one time a month ..
2) via SD card is written: Image not found - card has been formatted to FAT32, name of the image IS RAPHIMG.nbh.
3) via USB installation goes to the installation screen where "Image not found" is written also ... Active sync has been made, I've checked, that "USB support" is OK.
I have placed ROM and the *.exe file into one folder ..
Can anyone help me?
EDIT: Win XP Prof. 32BIT, Touch Pro and the ROM is ENERGY 23699 Sencity/Touch of Glass - tried both of them.
Update:
Stock update.zip needed!!
or, does those mod update.zip helps too ?
I've had trouble connecting this SGS4G to my PC.
I got it used, the previous owner fomated the SD card.
Is there any files comes with the stock SD card that affects the connection?
I tried hard and soft reset, still the PC said can't recognize it.
I even hand pick the USB driver in update driver option.
It says "Device cannot start (code 10)" something like that
Any advise will be appreicated!
Look for drivers only maybe different bit than your pc
Try just the sd.card in your.computer
Usb.debuging
Sent from my SGH-T959V using XDA Premium App
patpat09 said:
I've had trouble connecting this SGS4G to my PC.
I got it used, the previous owner fomated the SD card.
Is there any files comes with the stock SD card that affects the connection?
I tried hard and soft reset, still the PC said can't recognize it.
I even hand pick the USB driver in update driver option.
It says "Device cannot start (code 10)" something like that
Any advise will be appreicated!
Click to expand...
Click to collapse
Did you install the drivers found on the "how to root galaxy s4g and deleting fota files" thread in the development forum?
Sent from my SGH-T959V using Tapatalk
One thing you might try, if you haven't yet is a different (original) usb cable. I had this problem and realized I was using a moto usb cable. Just a thought.
golmar88 said:
One thing you might try, if you haven't yet is a different (original) usb cable. I had this problem and realized I was using a moto usb cable. Just a thought.
Click to expand...
Click to collapse
This happened to me also, with a kodak cable.
Sent from my SGH-T959V using Tapatalk
golmar88 said:
One thing you might try, if you haven't yet is a different (original) usb cable. I had this problem and realized I was using a moto usb cable. Just a thought.
Click to expand...
Click to collapse
+2 I had this issue before.
Thankyou for all the answers, I've used 3 different drivers, 1 from Kies, 1 from that Noob root guide, and one from somewhere i forgot.
I also used 3 different micro usb cable, HTC, MOTO, and samsung.
I went to Tmobile, plug in one of their sgs4g in my laptop, works perfectly, so not my laptop and not my cable.
Then i tested, my phone is not rooted yet with root checker, when I install superuser, it gave me an error msg saying that su binary file has a problem, It disappear before i write it down. and it said it copied that su binary on my sd card and tell me to reboot into recovery mode and install it.
I dont know how, and i guess that means a hard reset? I used that vol up+down and power buttom.Then I clicked reinstall packages, big discovery!
I found out that "E;/fail to open.mnt/internal_d/update.zip(No such file or direstory)
Man.... somehow that update.zip isn't there!!!
Anyone could point me to a place to download it? or simple upload me or send one to me email [email protected]
Again thank you for all the comments!
patpat09 said:
Update:
Stock update.zip needed!!
or, does those mod update.zip helps too ?
I've had trouble connecting this SGS4G to my PC.
I got it used, the previous owner fomated the SD card.
Is there any files comes with the stock SD card that affects the connection?
I tried hard and soft reset, still the PC said can't recognize it.
I even hand pick the USB driver in update driver option.
It says "Device cannot start (code 10)" something like that
Any advise will be appreicated!
Click to expand...
Click to collapse
Have you installed the driver's from Samsung yet?
Additionally, when you plug the USB cord in, what happens on your phone? Do icon's show up, up top? Nothing happens?
Have you tried to go into Settings>Applications>Development and made sure USB Debugging is on?
Now if you have tried a standard SGS4G from the TMO Store on your laptop and it worked, you might have gotten a bad deal buying that one used. Something might be jacked up on it.
Additionally, if it's unmodified which it sounds like it is,
Just go to Settings>Privacy>Factory Data Reset.
That will put you back to the original state.
joedeveloper said:
Have you installed the driver's from Samsung yet?
Additionally, when you plug the USB cord in, what happens on your phone? Do icon's show up, up top? Nothing happens?
Have you tried to go into Settings>Applications>Development and made sure USB Debugging is on?
Now if you have tried a standard SGS4G from the TMO Store on your laptop and it worked, you might have gotten a bad deal buying that one used. Something might be jacked up on it.
Additionally, if it's unmodified which it sounds like it is,
Just go to Settings>Privacy>Factory Data Reset.
That will put you back to the original state.
Click to expand...
Click to collapse
No icon show up.
Something is missing from the phone, i did the factory reset both soft and reinstall package in Recovery/ delete all user data, still no help.
When i use root checker, it tells me there is no su binary in system/bin
Superuser created one for me to the SD card, but es file explorer wont copy it into system/bin for me, and in recovery mode, it just say no update.zip exist in internal SD
patpat09 said:
No icon show up.
Something is missing from the phone, i did the factory reset both soft and reinstall package in Recovery/ delete all user data, still no help.
When i use root checker, it tells me there is no su binary in system/bin
Superuser created one for me to the SD card, but es file explorer wont copy it into system/bin for me, and in recovery mode, it just say no update.zip exist in internal SD
Click to expand...
Click to collapse
I'm not sure what would have been deleted off the phone to prevent the USB from working on your computer. Either way, you're kinda out of luck if it won't even connect to the computer.
Only other solution would be to download the stock ROM in the form of update.zip from your phones web browser, save to SD, then reboot into recovery and choose the second option.
The reason why update.zip is missing is because you haven't put it on your SD card. You typically download any zipped ROM, rename it to update.zip and then put it in the root of your SD.
Since you can't connect to the computer you'd have to download from a browser.
joedeveloper said:
I'm not sure what would have been deleted off the phone to prevent the USB from working on your computer. Either way, you're kinda out of luck if it won't even connect to the computer.
Only other solution would be to download the stock ROM in the form of update.zip from your phones web browser, save to SD, then reboot into recovery and choose the second option.
The reason why update.zip is missing is because you haven't put it on your SD card. You typically download any zipped ROM, rename it to update.zip and then put it in the root of your SD.
Since you can't connect to the computer you'd have to download from a browser.
Click to expand...
Click to collapse
Very usefull Info!!
I'm downloading that Stock DEODEXED KC1 now. But it's in Mc5
So, i just zip it right?
Luckily I could still take the sd card out and use a card reader to load stuff on it.
Mainly i want the connection to the pc for rooting.
Moreover, the Root checker says i already have Busybox installed, does it mean, the previous owner might have tried to or did rooted, but unroot it ?
That one doesnt work, so I tried another one which it states its completely stock (T959VUVKC1-REV00-ALL-low-CL933594.tar)
But still both turns out "E: signature verification failed"
any idea?
Hey guys,
I goofed. Big time. I accidentally wiped the sdcard in recovery mode when flashing to another rom.
I have her booted into red recovery and mounted the USB mass storage but it isn't showing up on my computer (I have a Mac that is running a dual boot of windows) on neither the windows or Mac side. Positive the drivers are installed on both.
Please help. If I can put a rom onto the card I'll be fine...but I can't get onto the card
Any suggestions?
Could use Odin or heimdall I've never tried to use mass storage while in recovery
Sent from my SGH-I997 using xda premium
Downloading Odin currently. Will post results. I hate my slow school Internet :/
ODIN Worked. Thanks
Wiped SD using CWM
So I had a problem almost the same.
I was using JellyBelly 4.2, and didn't like it. I wanted to go back to Cyan 10.0 and installed the files on my phone. I decided it was a good time to wipe everything, and started to do so. One of the files was the SD format. So I did that, and then wipe/data factory reset. Crap. So now I have no rom installed, and no files on my SD card.
I need help to place my zip files for CM 10 on my SD card (they are on my MAC now). I can't start up my phone to enable file transfer. I can only boot into CWM recovery. Is there a (step by step) way to push files from my MAC onto the SD card? Or is there a different way to tackle this?
I have a GNex (Toro) VZW
MacBook running snow leopard.
I am afraid that anything give me advice on you're gonna have to pretend that I am really dumb and need step by step directions. I tried to push via ADB but got this error, I don't know the correct commands for that. View attachment 1508775 Any suggestions?
It seems you do not have the android sdk set up along with adb.
Is this it?
andros11 said:
It seems you do not have the android sdk set up along with adb.
Click to expand...
Click to collapse
I thought I did. Here is what I have, I just don't know how to force my ROM's onto the SD card using it.View attachment 1508841
FIrst make sure you added the tools directory to your PATH.
There's a guide on how to set up the sdk on a mac: http://peter.boctor.net/2010/12/02/installing-the-android-sdk-on-mac-os-x/
you can skip the eclipse parts.
Of course, make sure you use your own path.
After that, adb should be recognized as a command.
To push, use this:
adb push "file.zip" /sdcard/file.zip
change "file.zip" for the location and name of the zip.
I often place files on my Home directory before pushing since it then only requires I specify the file name.
Problems with ADB path
So this is what I get when trying to install different commands into my path. I guess I am still doing it wrong? View attachment 1509964
You need to edit the Path to make it fit yours. Your sdk directory reads android-sdk-macosx 2.
It also depends on where you have that folder.
shooter5635 said:
Hey guys,
I goofed. Big time. I accidentally wiped the sdcard in recovery mode when flashing to another rom.
I have her booted into red recovery and mounted the USB mass storage but it isn't showing up on my computer (I have a Mac that is running a dual boot of windows) on neither the windows or Mac side. Positive the drivers are installed on both.
Please help. If I can put a rom onto the card I'll be fine...but I can't get onto the card
Any suggestions?
Click to expand...
Click to collapse
Pretty sure usbmount never worked with red cem for us...at least ot never did for me
MaxJ360 said:
So I had a problem almost the same.
I was using JellyBelly 4.2, and didn't like it. I wanted to go back to Cyan 10.0 and installed the files on my phone. I decided it was a good time to wipe everything, and started to do so. One of the files was the SD format. So I did that, and then wipe/data factory reset. Crap. So now I have no rom installed, and no files on my SD card.
I need help to place my zip files for CM 10 on my SD card (they are on my MAC now). I can't start up my phone to enable file transfer. I can only boot into CWM recovery. Is there a (step by step) way to push files from my MAC onto the SD card? Or is there a different way to tackle this?
I have a GNex (Toro) VZW
MacBook running snow leopard.
I am afraid that anything give me advice on you're gonna have to pretend that I am really dumb and need step by step directions. I tried to push via ADB but got this error, I don't know the correct commands for that. View attachment 1508775 Any suggestions?
Click to expand...
Click to collapse
Since your on jb with blue recovery you should be able to Mount USB storage from recovery...mounts and storage>mount USB>plug into computer
Sent from my SGH-I997 using Tapatalk 2
Mounts
So when I boot CWR and go to the mounts and storage menu I only see the following options.
Mount /sdcard
Mount /system
Unmount /cache
Unmount /data
Format /sdcard
Format /system
Format /cache
Format /data
I've tried them all while plugged into my Mac, and nothing happens on any of them.
Try getting your adb set up.
I'm pretty sure that if you right click on the tools folder and go to get info or anything similar to properties, it will show you the whole Path.