Database Info

[Q] Problem with superpad any help

I got Superpad version 2.1 and was work fine
I try to add Arabic to my by root and add font using root exlorer and i making restart when I restart it ,it stock on green and start over & over.
Aftr some restart i got messege " Erorr in boot , recovery home for yes menu for no " whene i click home to go to recovery it start again not take me to recovery.
i try useing burntool when i start nothing happen Is it becouse my one is framwere 1568
Any help will be appreciated .

up
any help please

[Q] Installing ROM on MTK6575

Hello,
I'm new to flashing and installing ROM on android phones.
I enabled root in this phone.
I wanted to install JellyBean 4.2.2.
After a long search on the internet and a lot of trying I decided to open a thread here.
My phone is Star N800 MTK6575 with Android 4.0.4.
When I tried to install ROM through recovery mode it showed me this:
"Failed to verify whole-file signature"
I tried to install ClockWorkMode Recovery without success
SP flash tool and Odin also disappointed me..
Could anyone help me please?
Maybe I did something wrong, can you please explain me step by step how to upgrade this phone?
Please help me, every answer will be appreciated.
Thank you!

I think I found the problem.
When I plug in my phone in the usb, when it's turn off and without the battery, I see it in the Device Manager appearing and then disconnecting.
I tried to change the Power Settings but it didn't help. Anyone faced this problem in the past and knows how to fix it?

Dont alter the zip,
in cwm toggle off the sign verification,then try flashing..:thumbup:
SENT FROM MONSTER ! ! !
HIT THANX OR I WILL JUST
CRY...

I don't have CWM, I have a regular android recovery mode..
I can't flash anything with it..

HELP ME PLEASE :crying:

Sel0x said:
HELP ME PLEASE :crying:
Click to expand...
Click to collapse
Hi, If u want to flash anyting from SP flash tool .Den follow these things.....Turn off ur phone with sim card,batter,and sd card out....Also make sure that u have installed mtk6575 drivers installed already....After that load everthing in sp flash tool and before clicking on download button..just press and hold volume up key and then insert usb in port...ur pc will detect the phone and install recovery or Rom........I also faced the same problem but this thing really helped me to install ROM

Hi,
Could You provide me that 4.2.2 ROM for N800 MTK6575, please.
I have a "brick" what needs a firmware...
Thanks,

[Q] micromax a110 is not working

hey there..i need some serious help!!! my micromax a110 is not working:crying::crying: it so happened that my cell suddenly got switched off..n den when i tried to switch it on it didnt start. just the starting screen appears and then it goes dead..then again the starting screen appears and it goes dead:crying::crying::crying:..please help me!!!! someone??? anyone???

try getting into recovery (vol + or - and pwr) and make a full wipe. if it will not power on, try flashing a new firmware. make sure you got the right one!

if u have cwm added then try to go to recovery n flash any custom rom of C2
if not then
Flash Stock rom using Sp tool it will Solve ur problem

dewdrops said:
hey there..i need some serious help!!! my micromax a110 is not working:crying::crying: it so happened that my cell suddenly got switched off..n den when i tried to switch it on it didnt start. just the starting screen appears and then it goes dead..then again the starting screen appears and it goes dead:crying::crying::crying:..please help me!!!! someone??? anyone???
Click to expand...
Click to collapse
I think it's out of charge, just plug in the charger and see what happens..

yog12 said:
if u have cwm added then try to go to recovery n flash any custom rom of C2
if not then
Flash Stock rom using Sp tool it will Solve ur problem
Click to expand...
Click to collapse
i tried doing that but thats not working...can you please tell me the procedure?

Lets Start
dewdrops said:
i tried doing that but thats not working...can you please tell me the procedure?
Click to expand...
Click to collapse
1)Install Drivers.
2)Open SP tool
3)Select 'Android Scatter file' inside ROM folder.
4)Click Firmware->Upgrade Button.
5)Connect Phone{Switched off} to PC via USB Cable.
6If everythings right,Flashing will proceed..
7)Wait till It finishes..A green ring is displayed on completion..
8))Now Close SP tool..Remove Phone from PC..
9)Switch ON the phone...It is successfully Flashed...:laugh:

I also face same problem some time when I make Factory or DRM reset
Green Android Robo with rotating frame
Start again and again. No switch off .. No effect after remove battery..
Only 1 solution "Do flash with SP Tool"

dewdrops said:
i tried doing that but thats not working...can you please tell me the procedure?
Click to expand...
Click to collapse
Hey no worries.. just follow my dis thread 'unbrick bricked canvas 2' :thumbup:
Link: http://forum.xda-developers.com/showthread.php?t=2376667
hit thx if i helped...

[Q] Please Help, Samsung grand quattro gt-i8552 stuck in CWM Recovery

Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks

sturkish said:
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
Click to expand...
Click to collapse
Can you boot into download/odin mode?

Hi I have the solution !!!
sturkish said:
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
Click to expand...
Click to collapse
Download this file
Code:
https://www.mediafire.com/?2dkdp5etfa9g2by
copy this file to your sd card..
then boot your phone normally and it will go into cwm mode as you mentioned ...
Select apply update zip from sd card...
Select the file you downloaded...
If it prompts select yes.... Your phone will boot into normall mode....
If you want all your contacts and smses backup you can do this by mobogenie software...
Hope it helps... if not message me... And dont forget to press thnx..

Yes
Kobro said:
Can you boot into download/odin mode?
Click to expand...
Click to collapse
Yes i can go to downloading mode but unfortunately odin can`t detect my phone.

Thanks Buddy
Thank you So much, let me give it a shot and let you know

sturkish said:
Yes i can go to downloading mode but unfortunately odin can`t detect my phone.
Click to expand...
Click to collapse
Then maybe its a driver problem? try downloading "samsung drivers for mobile phones", maybe that will let you get into odin and flash a stock rom.

Cant enter cwm recovery
Anyone can help me,i cant enter cwm recovery even though i press volume up + power + home button.If anyone have any idea tell me pls!!! thx alot!!!:crying:

OP Junior said:
Anyone can help me,i cant enter cwm recovery even though i press volume up + power + home button.If anyone have any idea tell me pls!!! thx alot!!!:crying:
Click to expand...
Click to collapse
wrong procedure bro..
power+home+vol up..hold them together and when phone vibrates then leave the power button but keep on holding the volume up and home button..you will go into you recovery. .
hit thanks ..it will motivate me..dont hesitate..
---------- Post added at 11:29 AM ---------- Previous post was at 11:24 AM ----------
sturkish said:
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
Click to expand...
Click to collapse
hey..just do one more thing in addition with all the things you have done
reflash cwm recovery using odin..but this time tick on auto reboot option..
n u r done!
if it worked please let me know..
and press thanks bro it will motivate me to help out severel peoples who messed up with their phone..

i 8552 stucks on samsung logo
hello all of u i done all as well as u tell above but now i face another problem while i reeboot the set it stucks on samsung logo & mtp drivers are not installing on my system . so due to mtp not installed odin is not working odin i am showing screen shoots of odin
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
after this it is doing nothing
please help me what to do

solution dint work
hi i tried with the file uv mentioned in the mediafire . but still im stuck in cwm mode .. when ever i boot it takes me to cwm mode ... please help ....

solution
gthm.dman said:
hi i tried with the file uv mentioned in the mediafire . but still im stuck in cwm mode .. when ever i boot it takes me to cwm mode ... please help ....
Click to expand...
Click to collapse
im good in English but i can help you, will dont use "reset to bootloader" using CWM, using "volume down+home+power" after the release power and while still holding volume down+home when you got in bootloader now connect your device in ODIN 3.07 it will detected now, change your recovery.tar.md5 using odin, i hope it will work

Didn't work!
archr3d said:
im good in English but i can help you, will dont use "reset to bootloader" using CWM, using "volume down+home+power" after the release power and while still holding volume down+home when you got in bootloader now connect your device in ODIN 3.07 it will detected now, change your recovery.tar.md5 using odin, i hope it will work
Click to expand...
Click to collapse
It's not working...
See.. The phone is booting directly to the CWM recovery..
ADB is working fine... I tested few commands using the cmd prompt and everything was fine..
After the phone enters Downloading mode,Odin couldn't recognize it...
I think Its because the Samsung Mobile USB CDC Composite Device divers are not properly installed in my PC ...
I tried everything to install it but I keep getting the "This device cannot start .Code 10" error...
So,Let me know how to fix this error...And that will solve the problem,I guess..
Thanks.

hello developers,
I have rooted mu samsung galaxy grand quattro. After that I have restored the system to factory reset. And from that time my system is in only CWM recovery. I have shown my phone in the service center as well. Those people are helpless. I guess my OS is missing. Please help me out.
And Thanks a Lot for this wonderful community and your endless support.

Legit Solution
sturkish said:
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
Click to expand...
Click to collapse
Hi there,
I just recently experienced this nightmare where I tried to factory reset my GT-I8552 and all went wrong. As u menioned,my device too got stuck into cwm recovery mode 6.0.4.5.
I searched the whole internet but to no avail. then i thought that my cwm might hv curropted or damaged.So i downloaded the stock cwm for GT-I8552 and flashed it using odin and say what..... my device booted normally!!
Hope this helps!
Currently i cannot send u the link but u can find the stock cwm for gt-i8552 from google!
 @parth3399

swapnilsj said:
hello developers,
I have rooted mu samsung galaxy grand quattro. After that I have restored the system to factory reset. And from that time my system is in only CWM recovery. I have shown my phone in the service center as well. Those people are helpless. I guess my OS is missing. Please help me out.
And Thanks a Lot for this wonderful community and your endless support.
Click to expand...
Click to collapse
Flash the cwm compactible to ur device using odin.... Worked for me !

I have also same issue and still stuck with this... please help..
bbsankarreddy said:
It's not working...
See.. The phone is booting directly to the CWM recovery..
ADB is working fine... I tested few commands using the cmd prompt and everything was fine..
After the phone enters Downloading mode,Odin couldn't recognize it...
I think Its because the Samsung Mobile USB CDC Composite Device divers are not properly installed in my PC ...
I tried everything to install it but I keep getting the "This device cannot start .Code 10" error...
So,Let me know how to fix this error...And that will solve the problem,I guess..
Thanks.
Click to expand...
Click to collapse
:
i have also same issue and i'm still stuck with this... please help .. i have install lot of drivers but the device did not detect in odin mode... need solution please

this helped me.
forum.xda-developers.com/showthread.php?t=2494471

Hi. I fixed mine by flashing cwm again but this time by ticking the Auto Reboot.

same problem here could you find any solution??
bbsankarreddy said:
It's not working...
See.. The phone is booting directly to the CWM recovery..
ADB is working fine... I tested few commands using the cmd prompt and everything was fine..
After the phone enters Downloading mode,Odin couldn't recognize it...
I think Its because the Samsung Mobile USB CDC Composite Device divers are not properly installed in my PC ...
I tried everything to install it but I keep getting the "This device cannot start .Code 10" error...
So,Let me know how to fix this error...And that will solve the problem,I guess..
Thanks.
Click to expand...
Click to collapse
hey, I am also facing with exact same issue, as I had cosmic ROM installed when i did factory reset from inside ROM it has stuck in bootloop in CWM and not even ODIN is able to recongnize it. I have tried lots of CDC drivers too, it recognizes my phone as LEmobile... I am stuck quite badly please help!!!!!!!!!!!!!!!!!!

heelp!
me too

Techno Mobile Stuck at Techno LOGO

Hi
Please help me my Techno Pop 5 LTE smartphone stuck at this logo, (picture attached), I 've tried all methods but even unable to Hard Reset through recovery menu (failed to start through buttons POWER+VOL UP), I 've tried a lot, if there is any other method kindly let me know.

f_magsi said:
Hi
Please help me my Techno Pop 5 LTE smartphone stuck at this logo, (picture attached), I 've tried all methods but even unable to Hard Reset through recovery menu (failed to start through buttons POWER+VOL UP), I 've tried a lot, if there is any other method kindly let me know.
Click to expand...
Click to collapse
If it is a software issue you may need to flash the phone fimrware. Please watch this video here and if you need help with files required, feel free to reply back.
Flash File
Download it from here
SP Flash Tool Modfied
Credits:
GSM Phone Repair

thanks brother, it worked.

f_magsi said:
thanks brother, it worked.
Click to expand...
Click to collapse
I'm glad to see your device is working again. Please post the screenshot here.

mvikrant97 said:
If it is a software issue you may need to flash the phone fimrware. Please watch this video here and if you need help with files required, feel free to reply back.
Flash File
Download it from here
SP Flash Tool Modfied
Credits:
GSM Phone Repair
Click to expand...
Click to collapse
I was trying to hard reset the phone, and recovery menu appeared previously it was not working, any way set restored successfully and every thing was working fine, but then i restarted the mobile to make sure, it was ok, but same problem happened again, stuck at logo, now again i am failed to find the recovery menu, by pressing Vol_Up + Power_Butn, and cannot turn off/switch off the mobile, it is a loop and auto restart, when i try to turn it off, now i want to flash the new software, please guide me.

f_magsi said:
I was trying to hard reset the phone, and recovery menu appeared previously it was not working, any way set restored successfully and every thing was working fine, but then i restarted the mobile to make sure, it was ok, but same problem happened again, stuck at logo, now again i am failed to find the recovery menu, by pressing Vol_Up + Power_Butn, and cannot turn off/switch off the mobile, it is a loop and auto restart, when i try to turn it off, now i want to flash the new software, please guide me.
Click to expand...
Click to collapse
Download this firmware if it BD4
Tecno POP BD4 Firmware
Does your phone have SPD/Uniscon chipset?

mvikrant97 said:
Download this firmware if it BD4
Tecno POP BD4 Firmware
Does your phone have SPD/Uniscon chipset?
Click to expand...
Click to collapse
hello i have almost same issue with tecno pop 5 LTE i try to restore the NVRAM now i try to reflash and and the phone its stuck at fastboot mode how can i fix this ... i try to download the file you posted so i can rewrite again i try sometimes with sp flash and i can write with that the only way i can flash is with chimera tools thats the weird part i need some help

w1n73rf3ll said:
hello i have almost same issue with tecno pop 5 LTE i try to restore the NVRAM now i try to reflash and and the phone its stuck at fastboot mode how can i fix this ... i try to download the file you posted so i can rewrite again i try sometimes with sp flash and i can write with that the only way i can flash is with chimera tools thats the weird part i need some help
Click to expand...
Click to collapse
I don't have Chimera tool to test.
Why do you need the chimera tool?

its a phone repair program ... i tried with others tools and no luck