Database Info

[ROM] [email protected] Mod (based on Android 2.2.1 OTA)

Hy guys, I'm new on XDA and I'm from Italy...I'd like you to know this rom for 32b (maybe ther's a port for 32a but I'm not sure) from Spain...I'll report here the topic on HTC Mania (htcmania.com). Here is it:
Recomiendo hacer las particiones es decir swap64mb ext512 y el resto como fat32 tambien recomiendo encarecida mente u obligatoriamente formatear la targeta de memoria o en su caso borrar las carpetas de android de la misma, haer todos los wipes, la Rom tarda unos pocos minitos en hacer el primer arranque ya que esta instalando todos los extras el primer arranque tarda entre 3 y 5 minutos, una vez este echo este arranque y realizada las configuraciones previas es de obligacion hacer un reinicio para la total funcionalidad del telefeno
change log:
Ruyman Froyo 2.2.1
añadida la nueva actualizacion de froyo 2.2.1
añadido el nuevo is.explorer
2 versiones de la rom white e black
la misma base que la 614Mhz pero con las actualizaciones mas actuales de la 2.2.1
añadido swap scrip en la base del terminal con los siguientes datos:
Cuando inician van al terminal y teclean
$su
#bootswapv2
y eligen las opciones "a" si tienen swap+fat o "b" si tienen swap+fat+ext3/4
luego les pide el swappines q yo lo tengo en 40 y funciona perfecto
a la tercera opcion si no tienen mucha idea ponganle q no con la "n"
y listo
LINK OFFICIAL FROYO (OTA BASED) Ruymaca: http://www.wuala.com/ruymanca/roms/Ruyman Froyo Oficial 2.2.1
NEW VERSION v3 OTA BASED: http://www.wuala.com/ruymanca/roms/Ruyman Mod Ota V3/
Pasos de la instalacion de la rom para un funcionanmiento perfecto:
Descargamos la rom y los kernells de estas direcciones:
Rom base(white e black) 614mhz: ....Ruyman Froyo 2.2.1 - Wuala
633mhz:.........http://www.megaupload.com/?d=LUR5F9WU
652mhz:.........http://www.megaupload.com/?d=IVACZ6QZ
672mhz:.........http://www.megaupload.com/?d=96OB691Y
710mhz:.........http://www.megaupload.com/?d=PM29ER2S
Hacemos un Nandroid por lo que pueda pasar
Copiamos archivos de seguridad al pc desde la tarjeta de memoria
Formateamos tarjeta de memoria (desde recovery haciendo las particiones swap64 ext3 512 resto fat32)
Conectamos el tlf al pc en transferencia de datos(recovery amon-ra 1.7.0 opcion 2)
Copiamos la rom y loa kernell deseados en la tarjeta memoria
Flasheamos la rom e iniciamos el tlf normalmente, hacemos la configuracion previa instalamos las app y demas, reiniciamos el tlf una vez termiando para que asiente la rom
Este paso es opcinal es la instalacaion de los kernell a mas velocidad tenemos que entrar en el tlf en recovery y flashear el kernel deseado como una rom y ya esta todo funcionando
Pack de programas esenciales: .....http://www.megaupload.com/?d=N1H2W4KW
Enlaces en wuala:http://www.wuala.com/ruymanca
PS: white version of this rom seems to have some problem to boot; black is ok here's the link on an Italian forum -->http://www.androidiani.com/forum/htc-magic-modding/22291-rom-ruyman-andra-mod.html and on Htcmania --> http://www.htcmania.com/showthread.php?t=135506 (SCREENSHOTS & CHANGELOG)
sorry for my little English
Gianluca

don't understand spanish. For a what this mod? Ezterry's rom is beautiful and amazing. So, not needed.
Need english translation...
what languages included inside the rom?

Hi, do you use it? is there italian language?
Ciao

there's the italian translation only in the previous rom, not in the 2.2.1 ota based (only english and spanish)....i use it and it's very smoots and it doesn't have any FC....

androgiallo said:
there's the italian translation only in the previous rom, not in the 2.2.1 ota based (only english and spanish)....i use it and it's very smoots and it doesn't have any FC....
Click to expand...
Click to collapse
So its mostly english? thats good is it fast what does it have in the feature department

androgiallo said:
Hy guys, I'm new on XDA and I'm from Italy...
Click to expand...
Click to collapse
ANtiHazarD said:
don't understand spanish.
Click to expand...
Click to collapse
Damn !!? Is it just bad reading or dumb*ss stupidity ?

Report
ROM is working fine. Smooth, no FCs, little small on /data partition but can be handled with Firerat's patches.
Too much ringtones. Remove and few MBs are back.
Fits in 92 MB system partition (for those who use MTD hack).
Battery life is acceptable.
Generally - solid daily driver.

gamin92 said:
Damn !!? Is it just bad reading or dumb*ss stupidity ?
Click to expand...
Click to collapse
no, you read right as soon as I've got 10 minutes I'll translate the firt post as best as I can....sorry!!!!
now is ou a new version based on OTA update 2.2.1; languages: english, spanish and Ilalian download link in the firt post...

Install this rom black version love it so far.. it's beautiful looking, fast and stable ..

Trek55 said:
Install this rom black version love it so far.. it's beautiful looking, fast and stable ..
Click to expand...
Click to collapse
where can I find the rom in the black version? does it have yhe update to froyo 2.2.1?

heatledger said:
where can I find the rom in the black version? does it have the update to froyo 2.2.1?
Click to expand...
Click to collapse
Here is the link for the Black Version you are referring to, yes it has 2.2.1 according to the file name.
http://www.wuala.com/ruymanca/roms/Ruyman%20Froyo%202.2.1
Alternatively then use the optional kernels:
633mhz:.........http://www.megaupload.com/?d=LUR5F9WU
652mhz:.........http://www.megaupload.com/?d=IVACZ6QZ
672mhz:.........http://www.megaupload.com/?d=96OB691Y
710mhz:.........http://www.megaupload.com/?d=PM29ER2S

Make sure you Nandroid and do a FULL wipe prior to installing it.
From the AmonRA/Cyanogen recovery:
wipe data, dalvik, ext, battery stats (fully charge battery first),
reboot into recovery,
wipe data, dalvik, ext, repair sd:ext (in partition on amon ra recovery),
Flash Rom then flash the Kernel if necessary (Not Required)

legend221 said:
Make sure you Nandroid and do a FULL wipe prior to installing it.
From the AmonRA/Cyanogen recovery:
wipe data, dalvik, ext, battery stats (fully charge battery first),
reboot into recovery,
wipe data, dalvik, ext, repair sd:ext (in partition on amon ra recovery),
Flash Rom then flash the Kernel if necessary (Not Required)
Click to expand...
Click to collapse
Is repair sd:ext necessary?

Trek55 said:
Is repair sd:ext necessary?
Click to expand...
Click to collapse
Its helped me avoid problems while others have complained of issues in various threads.
Up to your discretion though if you do it or not.

Here's a major downside, albeit I am using a 1400 mAh battery.
The battery consumption is high... may work for some but this is a major issue for me.
Going back to the Rom on my signature once I fully charge my battery again.
Seeing this Rom is based on CM Nightly as well, performance is there but I MUST have a reasonable battery life.
My occupation doesn't give me time to charge my battery throughout the day or night, once per day is a must for me.
Great Rom though, apps2ext working well, many settings to tweak.
Did notice the wi-fi didnt work and the built in browser has issues.

new version out on waula link in the 1st post....
fixed wi-fi issues
(download "Ruyman Oficial Ota modificada.zip" 83.1 MB 20 hours ogo )

legend221 said:
Great Rom though, apps2ext working well, many settings to tweak.
Click to expand...
Click to collapse
how did you get the APP2EXT, not froyo app2sd, working? I'v3 got a G1....
thx

androgiallo said:
how did you get the APP2EXT, not froyo app2sd, working? I'v3 got a G1....
thx
Click to expand...
Click to collapse
Firerat's script is working flawless with this ROM!

androgiallo said:
new version out on waula link in the 1st post....
fixed wi-fi issues
(download "Ruyman Oficial Ota modificada.zip" 83.1 MB 20 hours ogo )
Click to expand...
Click to collapse
Is this the white or black version?, I like the black version better than the white one...

OK, so this ROM is extra fast and stable, I would love to use it.
BUT PLEASE, remove this awful theming! Man, with all respect, this theme is... ugly. Please make a vanilla version and this will be one of best Froyos out there, your work is really great!

[DEV]MIUI v4 DEFY & DEFY+

MIUIv4 for your DEFY beta STATE:
State of the rom's MIUIv4 covers for our terminal
Wajk MIUI v4 2.8.2:
Wajk said:
About v4 (ICS) ROM:
- based on MiuiAndroid 4.0.3 (ICS) 2.7.6
- based on latest CM9 builds ( BiG thnx for Quarx and Epsylon3)
- added multilanguage support (25 languages)
(arabic - brazilian - czech - danish - dutch - english - french - german - greek - hebrew - hungarian - italian - korean - persian - polish - portugese - russian - slovak - slovenian - spanish - thai - turkish - ukrainian - vietnamese)
- added MotoPhonePortal
- added some MIUI apps
- removed some MIUI apps
- optimized battery usage
- optimized memory settings
- removed unneeded files
- updated Google apps
- more improvement coming soon
​
for Preview video go here
Status: beta Working on: tweaks, stability, speed, features...
Own port based on Miuiandroid & CM9
BiG thnx for Quarx and Epsylon3 and other developers [/SIZE]
DOWNLOAD
v4 (ICS) 2.8.2 for Defy with Froyo kernel
Kernel is included.
DOWNLOAD
v4 (ICS) 2.8.2+ for Defy/Defy+ with GB kernel
Kernel is not included.
Changelog 2.7.27
If you like what I do, and you want i will work continue
use Thanks button and/or consider a small donation. Thnx
Previous version
IMPORTANT!
Pls read before you will try ICS ROM!
On my device working very well for one week.
But of course Rom has got many bugs, I implemented all CM9 and MIUI v4 bugs into one ROM
If you want help to me and users, PLS post useful feedback. If ICS ROM not working on your device, use STABLE version.
Pls don't post compatibility problem, because some app from market don't like ICS, or don't like CM9 or don't like MIUI.
If you will find solution/apps for CM9 or MIUI v4 on the net, pls post it to this topic,
if you want better ROM to your devices.​
Known important bugs:
- Video recording sometimes FC
...​WIUI v4 2.5.11 VideoReview thnx to Arjoma
---------------------------------------------------------------------------------------------------------------------------------------------------------------​
Click to expand...
Click to collapse
MIUI.es 2.8.3 by Sesme
Sesme said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Based on
Miui v4 Gnex 2.8.3 by Muchopoli83
Miui v4 Dream Team Defy miui.com
Changelog
-Reloj MIUI 2x4 -in spanish
-GPS españa
-Miui Lock
-Lock Screen in spanish
-Imágenes de Resources Miui.es
-Full translate to spanish
fixes:
improved overall fluency
added the new Governors of cpu (smartashv2)
LANGUAGES removed tts no spanish
Voltages lowered [email protected] [email protected] [email protected] a [email protected] [email protected] [email protected] (very stable)
for defy plus [email protected] [email protected] [email protected] [email protected]
REMOVED from the original Dream Team:
- Voice Dialer
- Video Editor
- LatimIME now in Spanish
BUG's:
- Give a FC in the implementation issues if you want to edit the theme.
RECOMMENDATIONS
- Radio FM gracias a dragon007
- noFrillsCPU
- Baseband switcher
2.8.3 beta 1 DEFY PLUS y LENTE ROJA
​
2.8.3 DEFY LENTE VERDE
Thanks to Vauss, Muchopoli83, Trunk y mis beta Tester especially my sister
Click to expand...
Click to collapse

Reserved!!!!

testing:
On 05/03/2012 Cm9 Quarx:
NS 2.2.24 Port starts but does not work if the camera sensors and data preview but not 3G
On 19/03/2012 Cm9 Epsylon
NS tried 2.3.16 and 2.3.23 and Gnex the library fails libandroid_runtime.so MIUI v4 motorola logo. With the start of the bootanimation Cm9 but this does not happen.

Sesme said:
testing:
On 05/03/2012 Cm9 Quarx:
NS 2.2.24 Port starts but does not work if the camera sensors and data preview but not 3G
On 19/03/2012 Cm9 Epsylon
NS tried 2.3.16 and 2.3.23 and Gnex the library fails libandroid_runtime.so MIUI v4 motorola logo. With the start of the bootanimation Cm9 but this does not happen.
Click to expand...
Click to collapse
having the exact same problem when i tried to build my own ROM. stuck at boot logo

Hola Gente. Les cuento lo que hice: seguí el tuto para hacer el puerto usando la rom de quarx del dia 120308, CM9-NIGHTLY-120308-Defy(hwa) y la version v4 2.3.16 de esta pagina: http://forum.xda-developers.com/showthread.php?t=1383721. Ademas tuve que flashear el parche de bateria hecho por Auris en el post de cm9. Para la banda base de Defy instale un zip via clockworkmod.
todavia estoy testeando.
Que funciona?:
- Camara: fotos y videos (la primera vez no me anduvo, despues sin problemas)
- wifi
- Datos mobiles
- Youtube
- Almacenamiento USB
Que no funciona?:
- Sensor de proximidad.
- Sensor de acelerometro.
Acabo de termiar de subirlo por si quieren probarlo. El tema del acelerometro es bastante molesto. Espero que podamos encontrar una solucion. Menciono que despues de varias horas, casi 20, se puso un poco lento pero tras reiniciar se normalizo. Cualquier pregunta o sugerencia, soy todo oidos... u ojos. Saludos
Hi to all. I tell u what I did: following the tutorial I merged CM9-NIGHTLY-120308-Defy(hwa) from quarx whit the miui's v4 version from here: http://forum.xda-developers.com/showthread.php?t=1383721. Had to flash the battery fix from Auris which is in the cm9 post (http://www.4shared.com/zip/UR1QUISz/ICS_Defy_Red_Lense_Battery_Fix.html). For bbs I flash a zip via cwm.
What's working?:
- Camera: photo and videos (the first time didn't work. The next time, it did)
- wifi.
- Mobile data
- Youtube
- USB mass storage
What's not working?:
- proximity sensor.
-accelerometer sensor.
I just upload the rom if you want to try. I hope we could find a solution to the sensors problem. After several hours, my defy became a little laggy, but restarting go back to normality. Any question or suggestion, feel free to make it. Sorry for my englesh. isn't good, I know.
Miui-V4 for Defy: http://www.mediafire.com/?7n50rv78dm8ao68

Viva google translate

coelho_ said:
Viva google translate
Click to expand...
Click to collapse
Me siento mal... no fue google trasnlate... Muy malo mi inlges???

You have a better english than many others in here. I'll try your ROM as soon as I have downloaded it.
Sent from my MB525 using XDA

ldiomedi said:
Hola Gente. Les cuento lo que hice: seguí el tuto para hacer el puerto usando la rom de quarx del dia 120308, CM9-NIGHTLY-120308-Defy(hwa) y la version v4 2.3.16 de esta pagina: http://forum.xda-developers.com/showthread.php?t=1383721. Ademas tuve que flashear el parche de bateria hecho por Auris en el post de cm9. Para la banda base de Defy instale un zip via clockworkmod.
todavia estoy testeando.
Que funciona?:
- Camara: fotos y videos (la primera vez no me anduvo, despues sin problemas)
- wifi
- Datos mobiles
- Youtube
- Almacenamiento USB
Que no funciona?:
- Sensor de proximidad.
- Sensor de acelerometro.
Acabo de termiar de subirlo por si quieren probarlo. El tema del acelerometro es bastante molesto. Espero que podamos encontrar una solucion. Menciono que despues de varias horas, casi 20, se puso un poco lento pero tras reiniciar se normalizo. Cualquier pregunta o sugerencia, soy todo oidos... u ojos. Saludos
Hi to all. I tell u what I did: following the tutorial I merged CM9-NIGHTLY-120308-Defy(hwa) from quarx whit the miui's v4 version from here: http://forum.xda-developers.com/showthread.php?t=1383721. Had to flash the battery fix from Auris which is in the cm9 post (http://www.4shared.com/zip/UR1QUISz/ICS_Defy_Red_Lense_Battery_Fix.html). For bbs I flash a zip via cwm.
What's working?:
- Camera: photo and videos (the first time didn't work. The next time, it did)
- wifi.
- Mobile data
- Youtube
- USB mass storage
What's not working?:
- proximity sensor.
-accelerometer sensor.
I just upload the rom if you want to try. I hope we could find a solution to the sensors problem. After several hours, my defy became a little laggy, but restarting go back to normality. Any question or suggestion, feel free to make it. Sorry for my englesh. isn't good, I know.
Miui-V4 for Defy: http://www.mediafire.com/?7n50rv78dm8ao68
Click to expand...
Click to collapse
thanks a bunch. could you also take more latest stuff and build a new rom?
how about this base?
http://forum.xda-developers.com/showthread.php?t=1483033

abhifx said:
thanks a bunch. could you also take more latest stuff and build a new rom?
how about this base?
http://forum.xda-developers.com/showthread.php?t=1483033
Click to expand...
Click to collapse
I use that rom, but didn't boot
Sent from my MB525 using XDA

ldiomedi said:
Hola Gente. Les cuento lo que hice: seguí el tuto para hacer el puerto usando la rom de quarx del dia 120308, CM9-NIGHTLY-120308-Defy(hwa) y la version v4 2.3.16 de esta pagina: http://forum.xda-developers.com/showthread.php?t=1383721. Ademas tuve que flashear el parche de bateria hecho por Auris en el post de cm9. Para la banda base de Defy instale un zip via clockworkmod.
todavia estoy testeando.
Que funciona?:
- Camara: fotos y videos (la primera vez no me anduvo, despues sin problemas)
- wifi
- Datos mobiles
- Youtube
- Almacenamiento USB
Que no funciona?:
- Sensor de proximidad.
- Sensor de acelerometro.
Acabo de termiar de subirlo por si quieren probarlo. El tema del acelerometro es bastante molesto. Espero que podamos encontrar una solucion. Menciono que despues de varias horas, casi 20, se puso un poco lento pero tras reiniciar se normalizo. Cualquier pregunta o sugerencia, soy todo oidos... u ojos. Saludos
Hi to all. I tell u what I did: following the tutorial I merged CM9-NIGHTLY-120308-Defy(hwa) from quarx whit the miui's v4 version from here: http://forum.xda-developers.com/showthread.php?t=1383721. Had to flash the battery fix from Auris which is in the cm9 post (http://www.4shared.com/zip/UR1QUISz/ICS_Defy_Red_Lense_Battery_Fix.html). For bbs I flash a zip via cwm.
What's working?:
- Camera: photo and videos (the first time didn't work. The next time, it did)
- wifi.
- Mobile data
- Youtube
- USB mass storage
What's not working?:
- proximity sensor.
-accelerometer sensor.
I just upload the rom if you want to try. I hope we could find a solution to the sensors problem. After several hours, my defy became a little laggy, but restarting go back to normality. Any question or suggestion, feel free to make it. Sorry for my englesh. isn't good, I know.
Miui-V4 for Defy: http://www.mediafire.com/?7n50rv78dm8ao68
Click to expand...
Click to collapse
Regarding the sensors you put these two files in etc \ permision?
android.hardware.sensor.proximity.xml
android.hardware.sensor.light.xml
: D
To see if it will be that.
If the orientation is going a step further.
Ideally, do it with the 2.3.23 and the 19/03/2012
##########################################################################################################################################################################################################################################
Respecto a los sensores has metido estos dos archivos en etc\permision?
android.hardware.sensor.proximity.xml
android.hardware.sensor.light.xml
A ver si va ser eso.
Si te va la orientacion es un paso adelante.
Lo ideal seria hacerlo con la 2.3.23 y en la 19/03/2012

Sesme said:
Regarding the sensors you put these two files in etc \ permision?
android.hardware.sensor.proximity.xml
android.hardware.sensor.light.xml
: D
To see if it will be that.
If the orientation is going a step further.
Ideally, do it with the 2.3.23 and the 19/03/2012
##########################################################################################################################################################################################################################################
Respecto a los sensores has metido estos dos archivos en etc\permision?
android.hardware.sensor.proximity.xml
android.hardware.sensor.light.xml
A ver si va ser eso.
Si te va la orientacion es un paso adelante.
Lo ideal seria hacerlo con la 2.3.23 y en la 19/03/2012
Click to expand...
Click to collapse
I didn't do that. I already download 2.3.23 to upgrade and will try what you suggest. Theres no way that the 120319 works for me. Had to flash sbf so many time after flash that from. Thanks
No puse esos archivos. Ya baje la 2.3.23 para actualizar, y voy a probar lo que sugieres. No hay forma de que la 190312 me funcionara. Tuve que flash ear varias veces el sbf de froyo tras instalar mesa rom. Gracias
EDIT: I'm watching those files and both (base rom/ported rom) have the same.
Sent from my MB525 using XDA

ldiomedi said:
I didn't do that. I already download 2.3.23 to upgrade and will try what you suggest. Theres no way that the 120319 works for me. Had to flash sbf so many time after flash that from. Thanks
No puse esos archivos. Ya baje la 2.3.23 para actualizar, y voy a probar lo que sugieres. No hay forma de que la 190312 me funcionara. Tuve que flash ear varias veces el sbf de froyo tras instalar mesa rom. Gracias
Sent from my MB525 using XDA
Click to expand...
Click to collapse
the friend a.tanakaa use this base ICS: http://forum.xda-developers.com/showthread.php?t=1554000
19/03/2012 I think there is a problem of boot ...
I got the 05/03/2012 ocn start of Quarx but not those of Epsylon ..
Anyway we track and I think if we all contribute a little early we will have a cover for the DEFY miuiv4 at least as advanced as this CM9
##################################################################################################################################################################
El amigo a.tanakaa uso esta base ICS: http://forum.xda-developers.com/showthread.php?t=1554000
creo que la 19/03/2012 hay algun problema de boot...
yo conseguia arrancar ocn la 05/03/2012 de quarx pero con las de epsylon no..
De todos modos llevamos buen camino y creo que si todos aportamos un poco pronto tendremos una miuiv4 portada para el DEFY que al menos este tan avanzada como la cm9

Sesme said:
the friend a.tanakaa use this base ICS: http://forum.xda-developers.com/showthread.php?t=1554000
19/03/2012 I think there is a problem of boot ...
I got the 05/03/2012 ocn start of Quarx but not those of Epsylon ..
Anyway we track and I think if we all contribute a little early we will have a cover for the DEFY miuiv4 at least as advanced as this CM9
##################################################################################################################################################################
El amigo a.tanakaa uso esta base ICS: http://forum.xda-developers.com/showthread.php?t=1554000
creo que la 19/03/2012 hay algun problema de boot...
yo conseguia arrancar ocn la 05/03/2012 de quarx pero con las de epsylon no..
De todos modos llevamos buen camino y creo que si todos aportamos un poco pronto tendremos una miuiv4 portada para el DEFY que al menos este tan avanzada como la cm9
Click to expand...
Click to collapse
I use almost all of the cm9 relesed roms, and the only one that give me problems was the 19/03/12. I'm using the 08/03/12 because works everything, and works very well in my defy. I'm still don't use any GB kernel rom for this port. Maby in other moment. If we could give a solution to the sensors, my rom will be very usefull. I'm using it for the las 24 hours. Battery drain a little more than cm9, but not to much. Depends of the use, right?
He usado la mayoria de las roms de cm9 liberadas, y la unica que me provoco problemas fue la 19/03/12. Estoy usando para este port la 8/03/12 porque funciona todo y anda muy bien en mi defy. Todavia no he intentado hacer este trabajo con las roms de kernel gb. Talvez en otro momento. Si le podemos dar una solucion a los sensores, mi rom sería muy usable. Yo ya llevo con ella mas de 24 horas. La bateria se consume un poco mas rapido que con cm9, pero no mucho, Depende del uso, no?

ldiomedi said:
I use almost all of the cm9 relesed roms, and the only one that give me problems was the 19/03/12. I'm using the 08/03/12 because works everything, and works very well in my defy. I'm still don't use any GB kernel rom for this port. Maby in other moment. If we could give a solution to the sensors, my rom will be very usefull. I'm using it for the las 24 hours. Battery drain a little more than cm9, but not to much. Depends of the use, right?
He usado la mayoria de las roms de cm9 liberadas, y la unica que me provoco problemas fue la 19/03/12. Estoy usando para este port la 8/03/12 porque funciona todo y anda muy bien en mi defy. Todavia no he intentado hacer este trabajo con las roms de kernel gb. Talvez en otro momento. Si le podemos dar una solucion a los sensores, mi rom sería muy usable. Yo ya llevo con ella mas de 24 horas. La bateria se consume un poco mas rapido que con cm9, pero no mucho, Depende del uso, no?
Click to expand...
Click to collapse
What kernel use your rom cm9 o cm7?
Tu rom usa el kernel cm9 o cm7??

Sesme said:
What kernel use your rom cm9 o cm7?
Tu rom usa el kernel cm9 o cm7??
Click to expand...
Click to collapse
Froyo. La rom 08/03/12 de quarx tiene kernel cm7.
froyo. the quarx's rom from 05/03/12 has cm7 kernel

A big thanks to Idiomedi!
I don't know how you did it (could you tell please?) but mobile data are working fine! The ROM seems to run very well, and I think fixing the sensors isn't too hard.

Arjoma said:
A big thanks to Idiomedi!
I don't know how you did it (could you tell please?) but mobile data are working fine! The ROM seems to run very well, and I think fixing the sensors isn't too hard.
Click to expand...
Click to collapse
the most hardest work i did was find a V4 rom that could make 3g work on defy. I try so many. Two of them give me mobile data and this one is the most stable. The rest was just follow the proxuser's post about porting V4. And thanks to mentions the app "display orientator". i didn't know about that and work great.

hey, i´ve download it and install right now. I´m going to install it on latest revovery (dual boot), so you say it won´t be any inconveniences ??
che, lo bajé y lo voy a instalar ahora. Lo voy a instalar como latest recovery (en dual boot),vos decis que no habrá drama ?

Anhell said:
hey, i´ve download it and install right now. I´m going to install it on latest revovery (dual boot), so you say it won´t be any inconveniences ??
che, lo bajé y lo voy a instalar ahora. Lo voy a instalar como latest recovery (en dual boot),vos decis que no habrá drama ?
Click to expand...
Click to collapse
I don't know anything about dual boot. Try and inform
No se un joraca de dual boot. Probá e informá

Custom JB rom with TW Camera?

Please forgive me if I'm breaking any rules / being n00bish with this post., but I'm looking for something on behalf of a girl who doesn't speak any English and had trouble searching here...
Basically, what she says is that her phone on stock firmware (probably Froyo or Gingerbread with TW from the little googling I've done on the i9003) had a brilliant camera quality especially for videos, but she since updated to a custom 4.1.2 rom (I'm not sure, maybe a Cyanogen/AOSOP/Vanilla rom- I've never used a custom rom so I don't know too much, forgive my ignorance) and she says, translated as well as possible from Spanish "Lots of Roms with Jelly Bean are really good but they don't have the Samsung Camera (I assume the TouchWiz variety) and the JB camera always sucks for me, especially when recording videos" And she also mentioned that she can't get "Social Hub" on the Roms that she's tried...
Can anyone recommend me a good Jelly Bean Rom to recommend her that sorts the camera out, perhaps that has all the TouchWiz features in it, and preferably that has Social Hub in it?
I was eyeballing this thread - Potential solution??? Can anyone tell me whether this would solve her issues?
Thanks very much in advance,
DB

This is an application stock ?
our last stock i9003 is based on gingerbread it also disappears recent ICS

LoLaTiOn said:
This is an application stock ?
our last stock i9003 is based on gingerbread it also disappears recent ICS
Click to expand...
Click to collapse
Um, I'm not sure if I understand what you're saying, my friend. Could you give me a link please? No entendí
-------------------------------------
Sent via something that can't finish it's sentan...

u should hav posted it in general forum.. Anyway try REMICS or JELLYBAM both are gud.. since u wnt touchwiz ui go for REMICS.. Close this thread as well..
Sent from my GT-I9003 using xda app-developers app

Video recording is not fully working on 4.0+ firmware.
So changing the camera app wont fix the issue.
Ask her to stay on gingerbread if she cannot live without fully working camera.
Sent from my GT-I9003 using xda app-developers app

Como te comentan, el problema dea cámara es cosa de drivers y kernel, no de la app. Si quiere que el teléfono le vaya tan bien como en la stock, es esa la que debe poner, principalmente si le interesa el tema de la cámara. Tendrá que evaluar qué es lo que más le interesa de cada ROM.
Espero haberte ayudado
Sent from my GT-I9003 using xda premium

rodero95 said:
Como te comentan, el problema dea cámara es cosa de drivers y kernel, no de la app. Si quiere que el teléfono le vaya tan bien como en la stock, es esa la que debe poner, principalmente si le interesa el tema de la cámara. Tendrá que evaluar qué es lo que más le interesa de cada ROM.
Espero haberte ayudado
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
hey dude but you have answered in Spanish lol
Google translation power ?§!
As you say, the problem of camera drivers and kernel thing, not the app. If you want the phone to do as well as in stock, is that you must make, especially if you are interested in the subject of the camera. You will have to evaluate what you are most interested in ROM.
Hope that helps
Click to expand...
Click to collapse
Make your friends advise to stay on a stock KPE !!! unstable camera based on ICS and JB
I warn the moderator to move this topic in the general section
cordially

Thanks very much! Muchas gracias!
Sorry for posting in the wrong section, the advice here was brilliant and I don't mind that someone posted in Spanish as I understand it and it saves me the trouble of translating back to her what he said
-------------------------------------
Sent via something that can't finish it's sentan...

Monster$ rom for i8260

this is a test build
http://d-h.st/aOC
give me ss of whole rom

1 no . @Omkar$
Sent from my GT-I8262 using XDA Premium 4 mobile app

Omkar hi. Very good job. Working properly. But missing some features like what he had the build 2 28/12/13 3d gallery, and live video gallery. Transparent status bar and other features.
Sent from my GT-I8260 monster
XDA Premium 4 mobile app

testing
im just flashing your test rom on i8260 with PhilZ Touch 6 Recovery during the today and tomorow i will write here noticed bugs and stability isue of the rom,im realy heavy user ))thanks on efort to create custom rom for i8260 you are the only here.sory for my bad eanglish greatings from Serbia
---------- Post added at 06:28 PM ---------- Previous post was at 06:03 PM ----------
not flashable via cwm gives me a status7 eror, (expects 5 args,got 4 eror in storage/external_sd/monster test buid.zip)
---------- Post added at 06:34 PM ---------- Previous post was at 06:28 PM ----------
ok my bad didnt see option for old binaries in cwm now flashes just fine

testing
My concluison for now :
Ultrastable
Very fast
Not big improvement in ram consumption 741/842mb used is about average
No problems with conectivity wifi,3g...
Very clear sound in speaker and a bit louder
Camera working great and video record too
Exelent work of video player from s2
Transparent statusbar with shades looks great and have no bugs
Internet is ultra fast now compare to stock rom
Viber,skype,facebook,google+ works great no bugs
The only things bothers me is short batery life from 70% to 21% after 2hours heavy use wifi on apps instaling setings testing work on social apps etc
And litlle confusing thing default root app on rom is SUPERUSER and not SUPERSU (i have realy bad expirience with superuser)
CONCLUSION NO BUGS!!! FASTER THEN STOCK!!!NO BLOATWARE!!!NOT TOO MUCH EYE CANDY) AND ULTRA STABLE FOR NOW
Two question for developer: is this realy android 4.4.2 ? And can you port fully working multiwindow on this rom?

troske said:
My concluison for now :
Ultrastable
Very fast
Not big improvement in ram consumption 741/842mb used is about average
No problems with conectivity wifi,3g...
Very clear sound in speaker and a bit louder
Camera working great and video record too
Exelent work of video player from s2
Transparent statusbar with shades looks great and have no bugs
Internet is ultra fast now compare to stock rom
Viber,skype,facebook,google+ works great no bugs
The only things bothers me is short batery life from 70% to 21% after 2hours heavy use wifi on apps instaling setings testing work on social apps etc
And litlle confusing thing default root app on rom is SUPERUSER and not SUPERSU (i have realy bad expirience with superuser)
CONCLUSION NO BUGS!!! FASTER THEN STOCK!!!NO BLOATWARE!!!NOT TOO MUCH EYE CANDY) AND ULTRA STABLE FOR NOW
Two question for developer: is this realy android 4.4.2 ? And can you port fully working multiwindow on this rom?
Click to expand...
Click to collapse
This rom for test. Not ready!
Sent from my GT-I8260 using XDA Premium 4 mobile app

I think its ready i have s2 with official cm stable relase and in first two hours of use i find 3 bugs and lag here with this test build nothing)))
Sent from my GT-I8260 using XDA Premium 4 mobile app

Lo pruebo y comento - I try and comment
Omkar$ said:
this is a test build
give me ss of whole rom
Click to expand...
Click to collapse
Buenas noches, soy de argentina y voy a probarlo. Hace unos dias intente instalar el [MONSTER$] [BUILD 3] FoR GalaxY Core [I8262] y no funciono debido a que mi movil es un 8260L. Levante el backup desde cwm y sigo con la version 4.1.2 original que trae el 8260L en Argentina Liberado para cualquier compania.
Voy a instalar esta version de prueba en mi 8260L y luego pondre el resultado en este post. Desde ya muchisimas gracias por realizar estas Custom Rom para nuestros moviles.
Saludos desde Laboulaye,Cordoba,Argentina.
Hugo
Pd: Disculpen mi ingles, es muy malo ja ja ja
---------------------------------
Good evening, I'm from Argentina and I'm going to try. A few days ago try to install the [MONSTER $] [BUILD 3] For Galaxy Core [I8262] and it did not work because my phone is a 8260L. Lift the backup from cwm and still have the original version 4.1.2 brings 8260L in Argentina Released for any company.
I'm going to install this in my shareware 8260L and then will put the result in this post. From already thank you very much for making these Custom Rom for our phones.
Greetings from Laboulaye, Cordoba, Argentina.
Hugo
Pd: Sorry for my English is very bad ha ha ha

giannisnetwork said:
Omkar hi. Very good job. Working properly. But missing some features like what he had the build 2 28/12/13 3d gallery, and live video gallery. Transparent status bar and other features.
Sent from my GT-I8260 monster
XDA Premium 4 mobile app
Click to expand...
Click to collapse
plz make a vedio of this rom
or send me screenshots atleast send me 20 ss of this rom via pm

Omkar$ said:
plz make a vedio of this rom
or send me screenshots atleast send me 20 ss of this rom via pm
Click to expand...
Click to collapse
Should have over the rom monster 3d gallery. Live video gallery and multiwindow. All other works perfectly and quickly.

Monster rom I8260
Sent from my GT-I8260 using XDA Premium 4 mobile app

Rom is super stable nothing more to say
Sent from my GT-I8260 using XDA Premium 4 mobile app

View attachment 2642083
Sent from my GT-I8260 using XDA Premium 4 mobile app

Transparent status bar
Sent from my GT-I8260 using XDA Premium 4 mobile app

99569892 13
Instala perfecto y es muy rapida. Hasta el momento tuve 1 solo bug que es que el telefono trabajando normalmente se queda colgado y hay que apagarlo y volverlo a encender. Todo lo demas anda perfecto, probe reinstalar de nuevo y el mismo problema. Esto me sucede luego de estar unos 15-20 minutos trabajando con el celu, no importa la aplicacion, se cuelga estes usando la aplicacion que estes usando.
Para instalar el custom rom realize 1º un backup con cwm, luego instale el zip desde el cwm y inicio perfecto. Note que las descargas son mas rapidas, el movimiento de pantallas tambien mas fluido y todo lo demas perfecto, excepto por el bug que antes menciono.
Alguna solucion? Te sucedio lo mismo?
Esta custom rom no es 4.2.2 es la version 4.1.2, o estoy errado ?
Un abrazo
Hugo
---------------------------------
Download perfect and is very fast. So far I had only 1 bug that the phone is working normally hangs and you have to turn it off and on again. Everything else works perfectly, probe reinstall it again and the same problem. This happens to me after spending 15-20 minutes working with the cellular, no matter the application, hangs're using the application you are using.
To install the custom rom Realize 1 backup with cwm, then install the zip from cwm and start perfect. Note that the downloads are faster, but also the movement of fluid screens and everything else perfect, except for the previously mentioned bug.
Any solution? I happened the same?
This custom rom is not 4.2.2 is the version 4.1.2, or am I wrong?
a hug
Hugo

Which recovery you suggest before installing monster-rom @i8260?

4539983 280
friendfriend said:
Which recovery you suggest before installing monster-rom @i8260?
Click to expand...
Click to collapse
Antes de instalar cualquier custom rom "siempre" realizar un backup desde cwm por cualquier problema que pueda surgir. Ahora estoy por hacer swipe y reinstalar de nuevo esta custom rom para ver si puedo dar en la tecla con el problema que hace que el movil se bloquee
Un abrazo
Hugo
------------------------------
Before installing any custom rom "always" make a backup from cwm for any problems that may arise. Now I'm done swipe and reinstall it again this custom rom to see if I can give the key to the problem that makes the mobile is locked
a hug
Hugo

Sigo con el mismo problema, instalo todo perfecto y en 10-15 minutosbde uso se bloquea. Antes le echaba la culpa a las app instaladas, en esta prueba no instale ninguna app y sin embargo se bloquea. Pantalla negra y sólo queda apagar y prender de nuevo.
Alguno pudo resolverlo?
Sent from my GT-I8260L using xda app-developers app

@nolimithhm did you wipe cache l,factory reset and wipe dalvik? I dont have that hang problem rom working perfect after 1 day heavy use and 4 coplete caharge recarge battery))
Sent from my GT-I8260 using XDA Premium 4 mobile app

More photos of rom
Sent from my GT-I8260 using XDA Premium 4 mobile app

TWRP 3.0.2 Multirom M8 Inverted Materialized theme

This is repacked latest version of TWRP multi rom for Htc M8
I repacked with Materialized Inverted theme
Download HERE

Nice work and thank u for sharing.
I don't know if you know how to add it but there are new additional menu items in multirom recovery with
TWRP_3.0.2-0_multirom_m8_20160418-02.img (well new since MM anyway ????)
The no-kexec work around option is missing in the materialized theme.
Lol, I just realized I failed to see if the other new stuff like MR klogs was also missing... I'll report back later though.
Again thank u for sharing, I've been hunting for a MR 3.0 theme since MM dropped ????

ckvisme said:
Nice work and thank u for sharing.
I don't know if you know how to add it but there are new additional menu items in multirom recovery with
TWRP_3.0.2-0_multirom_m8_20160418-02.img (well new since MM anyway ????)
The no-kexec work around option is missing in the materialized theme.
Lol, I just realized I failed to see if the other new stuff like MR klogs was also missing... I'll report back later though.
Again thank u for sharing, I've been hunting for a MR 3.0 theme since MM dropped ????
Click to expand...
Click to collapse
Mod edit - translated by https://www.deepl.com/translator:
I tried everything to use multirom and I couldn't get anyone to help me, thanks
*******************************
Ayuda e intentado de todo para usar multirom y no e podido alguien q me ayude gracias

camachomarco466 said:
Mod edit - translated by https://www.deepl.com/translator:
I tried everything to use multirom and I couldn't get anyone to help me, thanks
*******************************
Ayuda e intentado de todo para usar multirom y no e podido alguien q me ayude gracias
Click to expand...
Click to collapse
@camachomarco466 XDA Forum Rules (excerpt):
...
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
...
Click to expand...
Click to collapse
...
4. Usa el idioma inglés.
Entendemos que con todas las diferentes nacionalidades, no todo el mundo habla bien el inglés, pero por favor, inténtelo. Si realmente no puedes escribir en inglés, usa un traductor en línea. Eres libre de incluir tu mensaje original en tu propio idioma, debajo de la traducción en inglés. (Esta regla cubre tus mensajes, entradas de perfil y firma). Puedes intentarlo en https://translate.google.com/ o https://www.babelfish.com/ o usar uno de tu elección.
Traducción realizada con la versión gratuita del traductor www.DeepL.com/Translator
...
Click to expand...
Click to collapse