then I'll see if I get a full backup done by recovery until day 21 and vo arrange for assistance;;;
good after testing the ROM android 4.2 on my xoom was okay. I decided to install Chainfire; result bricked my xoom.
'll Immediately thought flashing the rom by CWM but was always frustrated "operation aborted". I went into despair and found a cable manufactures jao did very well and looked the other way.
wanted to share the idea with staff and asked his opinion if it would work and if poderiao help me.
idea:
I realized at the CWM still manages to beckups and restore, so I wanted to try but I did not have a chance because I have not the beckup.
Note 1:
the tablet is not out of the motorola logo
2
as he did not enter into debug and impossible concertalo ADB
Note 3 and a request if I can spend a full beckup done by despair to recovery here
NOTE 4
excuse the frustration, I'm new to the XDA and even desperate ^ _O. And excuse the spelling wrong (google translator), and the huge text kkkkk.
Thank you all ae
Related
Hey guys hope someone has a positive answer,
As the topic says it all really i have rooted many many devices but this time i am stuck the kindle i have rooted and been changing the os for some time now.But i bricked it after reload wrp. and it went to the reboot round.It gas happen befor and the answer was simple as i have a factory cabble i simply just put her in fastboot and did a restore from the backup img well i cannot do that this time because my kids broke the drive i had the backup on.So now what i can sure get her in fastboot but thats it without the backup.So i have looked all over online for the kindle backup files as they are img files not .bit as the update file is and there is severall files as i recall to the backup.So please any answer will be awsome NS THANKS...
I am a new to xda but i am no noob i can help you but new members cant post external links so i advice you to go to your sevice centre.....or else go tour phones official site ...hope there would be repaiir my software option ......then you are blessed you can again root your phone and flash roms with less bugs ....
Hit like if i helped you
Hi,
I work in a school, and the school have just purchased 75 Lenovo A7600 tablets (Lenovo Tab A10).
Basically, I want to build one up and image the rest so I thought the best way to do this would be with a custome recovery - any thoughts? Any suggestion on how to do this with this model?
I was thinking the best way would be to flash Clockwork Recovery, then use that to backup on the first device and then restore it on the rest. Obviously as the tablet isn't very popular model, there's very little online about doing this on this model so I'm a little hesitant as only done it with Samsung phones in the past, following guides.
At the minute it's taking about 40mins per tablet to setup to how we want it so I think this would be a quicker way, if we had say 10 SD cards and just worked through them.
We can't get drivers for this device so would all need to be done on the device.
Lenovo have said we can do what we want with the software, their warranty still stands unless we start physically tinkering with the hardware.
Any help and/or advice is highly appreciated.
So I've searched the forums, and I'm sorry to bring up a old thread.
But, I'm looking for a way to root the A-7600 aswell, love the tablet (for the money I paied), And all I miss is root.
Thanks!
Better late than never !
Hi guys,
there is a thread on this site about your problem : its name is "[Guide] Lenovo Tab 2 A10-70 Root, Recovery, Xposed and Others" (I'm sorry, since I am new on this site, I can't post any link)
Cheers,
ALRIGHT for the past couple years i've turned to this site for solutions to my android issues and rooting and the such. Recently i wanted to manually update my LG Optimus G E970 to Jellybean because i got a new logic board and it's at 4.0.1 and it's totally booty. (lol rooted old logic board and i gave way too many permissions to 'system' and it went FUBAR)
i'm not going to screw with that device until i know what i'm doing SO i got my Samsung Infuse (currently at 2.2.1) (NOT ROOTED) as my test subject. after 3 hours of frustration with minimal solutions, i figure it's time to dive into this community for some 1 on ..probably 20 Q&A
-= HERE IS WHAT I GOT SO FAR=-
I got ADB working,
device connected
update.zip is acquired (gingerbread as test)
at recovery mode on Samsung
used "./adb push update.zip /mnt/internal_sd/" (on mac but i can 'translate')
-=CURRENT ISSUES=-
after entering the above command, the update.zip is found but i get the "E: verification failed"
found that the System Recovery is 3e (im pretty sure i need 2e so i dont get this error message)
i find it easier to learn when i'm talking to someone rather than reading old posts or stickies.
IM ON A MAC!! i'm limited to what programs i can use. it blows. please keep this in mind.
-=QUESTIONS=-
dafuq does that error message mean?
is there a verified update package by samsung or some shiz?
can i do this without the hassle of Rooting?
need any clarification, feel free to ask and what not. i got nothing better to do, so expect some speedy responses by yours truely.
To the wonderful hero who I hope can save me.. I just want to apologize before hand about the lack of tech-ie-ness in this plea for help.. I really am just a money with fancy tools at this point, just banging away making a mess of everything.. lol .. I did my homework after I made a mess. Aka bricked two phones of my my friends.. I took rooting droid as equal to jail breaking iphones... after a lot of reading after I I bricked, I know now the basics... having said that.. I did make a mess.
First I have a m580 I rooted.. too much pot and not enough reading later I hooked a friends m820 up to the same odin set up I used on my m580.. the problem is that m580 has built in keyboard and uses other command to put phone in to download mode.. so the keys dont exist to press to re-flash it with the proper firmware which I have now.. and no one is working on this phone type because its old as dirt..
that was first mess up.. before I learned how vary complex Dev droid talk is... I assumed this VERIZON ELLIPSIS 7 was a jflte type of galaxy s4 and using Flasher or flashy something like that.. I tried to put CWM on the verizon.. now its stuck in boot loop.. I have no back up.. I now know how important that is now.... been doing homework on MTK Droid TOOLS and SP FLASH TOOLS and think if someone would send me a stock rom of the Verizon Ellipsis 7 {qvm7b} I could handle fixing it.. although test runs with it to this point have shown an issue, I have yet to figure out points of contact on board to rest the preloader.. in other words, unable to keep it from rebooting every 5 second so I can flash it with a rom I dont have yet..... holding vol down does nothing.. same thing with any other button combo. .. I have popped off the back of the tablet to unplug battery just to get it to shut off. With what I have learned I feel I can handle any directions ok.. and if I could fix this mess I can handle not destroying any more phone or tablets.. maybe.. lol that is kinda the fun part of having things.. breaking them.. but these things dont belong to me.. anyone who can help me either get the tablet out of boot loop.. and or send stock and/or rooted firmware for the verizon tablet QMV7B I would be very grateful. Or if you know of a program I could use to wipe the m820,with steps by step “how to” for dummies please.. lol
HELP ME ANDROID DEV-ONE.. YOU'RE MY ONLY HOPE..
JOE LENKER
[email protected]
Hi
Thanks for writing to us at XDA Assist. Unfortunately I can't find anything relating to your question(s) on XDA, please ask your question here:
Android Q&A, Help & Troubleshooting
No response in two days, thread closed.
Hi all,
I've been ROM'ing since 2013 on multiple devices so I am somewhat familiar with adb/fastboot flashing and commands, what to do, what not to do, etc.... I just picked up a used pixel and first thing I did was unlock the bootloader - no problem. Next I go to root, so I began following this tutorial https://android.gadgethacks.com/how-to/root-your-google-pixel-pixel-xl-0174670/ , as instructed I DL the required drivers, image files, patch file etc...and follow this tutorial for installing TWRP https://android.gadgethacks.com/how-to/install-twrp-custom-recovery-your-pixel-pixel-xl-0175163/ , I get to step 8 and instruct via the command window to fastboot boot twrp.img, just as instructed. Everything appeared to be going the way it should as it started to boot to TWRP but almost as quickly the phone just died. I mean dead as a door nail. It won't do a thing. It won't even charge now. I have never had a phone just die like this. I fear I have met my first true full on brick.
I mean, yeah, I have soft bricked phones many a times but always had a backup to restore or was able to dig my way out one way or another but that was explainable by messing with questionable ROM's or something similar. Here I was just booting to the phone specific most recent version of TWRP by a solid well known tutorial with solid links, no indication that these could be the wrong images or zip's at all....but I'll be damned if this phone is dead as hell. I'm hoping someone can shed some light as to what happened or even miraculously tell me that it can be fixed.
Guys, is this a worst case scenario full on brick with no hope or getting it back to life? If so, why? Where did I go wrong? If this is going to be what I fear it is I hope to at least understand how it happened so I can avoid it in the future. This was a very expensive F-up on my part. I am beside myself with grief and disbelief that I could have done this with as many times as I have unlocked bootloaders, rooted, installed TWRP, flashed ROM's, etc.. I mean I 'm not the best but I am not a noob by any means. I feel like such a dumb ass right now!
Appreciate any help or explanation anyone can offer. Thanks.
We don't flash avb or any other patches anymore and haven't for like an android version and a half. For future reference look for more current information when modding a phone and for simple things like root guides go to xda don't just ask Google.
@kerryh420,
Those are some pretty old tutorials!
After plugging in the charger and wait for say 10seconds, can you boot into bootloader with button combo?
(Power + volume down or power + volume up for recovery as alternative)
Cheers
Sent from my Galaxy Tab S2 8.0 using XDA Labs
No offense, if you've been ROM'ing since 2013 you'd know not to go to other websites for tutorials! XDA is your best friend to follow instructions on Rooting, Flashing a recovery, and etc! Sorry that happened to ya. If it's literally dead you're probably out of luck and I know that's not what you want to hear. My best advice is to not follow tutorials on other websites. Good luck on your next device!