Database Info

rom ics port from su760 havnt network also imei

plz help i tryed flash 18v bb and another but the base bande doesnt change.i used smartflash haw can i enable network

kimogunz said:
plz help i tryed flash 18v bb and another but the base bande doesnt change.i used smartflash haw can i enable network
Click to expand...
Click to collapse
Try flash by lg flash tool
if you lose you IMEI .....
Restoring IMEI
1.Connect phone by USB
2.Activate USB debug mode
3.Enter 3845#*920# in dialer if that doesn’t work try 3845#*925# or 3845#*720# if device is SU760
4.Select Port Settings -> Select CP USB
5.A new device should appear at let it install
6.Open Tutty and select serial protocol. Click on open
7.Type AT if response is not OK, change port number (it is possible that when typing you don’t see any letters)
8.Type at%imei, it should display a dummy IMEI
9.Type at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x where x,x,x... is your orginal IMEI number (found under the battery of your phone). It should response IMEI WRITE OK
10. change Port Settings ->form CP USB TO AP USB
11. reboot your device
Here is Tutty Program
http://putty.dwalin.ru/download/tutty/0.60.2.0/tutty-0.60.2.0.zip

serial number donst work .have you any ather meth? thx

kimogunz said:
serial number donst work .have you any ather meth? thx
Click to expand...
Click to collapse
That method works, what's the problem you're facing?

kimogunz said:
plz help i tryed flash 18v bb and another but the base bande doesnt change.i used smartflash haw can i enable network
Click to expand...
Click to collapse
the baseband does not show in Settings=> about phone.
If you want to know your baseband you need to download "Getril" from playstore.
i think you need to be rooted for that to work, but i am not sure.
Also, it is always better to explain the problem you are facing.
Baseband cannot be changed with smartflash. u need LG FLASHTOOL to change the baseband.
please reply with more details like when and how you lost the network.
If you think I helped, please click on thanks.
schubeir

Well i tryed flash with lg flash tool but i dont entre a mode (press vol+ and conect usb) it trable the pc detect the phone and not detect and detect...= this mode became not stable.i notice this when i istall ics port.so use to flash a (press power boutton and vol+..can u give me a solution? And give me a flashtool link become i m not sure having a right one..

plz help urgentttttttttttttt

kimogunz said:
Well i tryed flash with lg flash tool but i dont entre a mode (press vol+ and conect usb) it trable the pc detect the phone and not detect and detect...= this mode became not stable.i notice this when i istall ics port.so use to flash a (press power boutton and vol+..can u give me a solution? And give me a flashtool link become i m not sure having a right one..
Click to expand...
Click to collapse
Hello,
please be specific. what rom are you trying to flash? ICS? GB? CM?
you need to read and understand and only then proceed. I had commented in my earlier reply that you need to reply with more details, but you skipped that part. If this is the way you try to flash a ROM by not reading and following step by step, word by word, you will never reach where you intend to.
schubeir

i m using ics rom ported from us760 but my phoe became havnt network and imei ... so i tryed to flash a baseband v18 with lg flashtool... but i cant becose the download mode(press vol+ and usb concting) it become instable when i enterd this mode..the pc detect the phone and 'omap4430' apair in device driver .afther 3 seconde it not detecting! this become sync so i cant flash baseband.plz can you give me a solution to fix this or tell me haw can i downgrand to v20 or v10 ..sirsly i bored with this problem plz help

[GUIDE] [P720/725/720H] Resurrection Guide (Let´s get those brick´s fixed)

Hello Guys, i have to show you, how you can recover your LG P720/725 and 720H. It´s very simple. Since i have my LG P720 i have reflashed my phone so often by this step´s
there give´s 3 methodes to bring your Smarthphone back to orginal
First what do you need.
First off all you need the KDZ from your Phone and the *.cp and *.ap also the binarys
----------- S/W MODE --------------
Plugged your Batterie out of the Phone. Wait 3 seconds.
Bring it back and insert your USB Cable to the Phone. Then Hold the Volume+ Button for 6 seconds. Your S/W Mode will start.
Now Connect your Phone to the PC, maybe you must install the Driver. (There are in the LG Flash Tool Package included)
If you didn´t flashed your Phone and it´s bricked automaticly , you can use the First Methode
--------First Methode ------
Connect Your Phone via USB to the PC and bring your Phone in the S/W Mode.
Start your LGMobile Support Tool and start the Emergency Mode, it will download the KDZ and flash it new to the Phone.
You have flashed a wrong Bin or KDZ to your Phone? Or Your Bootloader is bricked, also Bootloop ? Use this Methode
---------- Second Methode-----------------
You need the "LG Flash Tool Package" and the full working "LPG720 DLL" you can get the FlashPack here p92x.acidhazardrom.com/ccount/click.php?id=15 . This Includes all relevant Drivers, install it.
Here in the Post you find the LG Flash Tool 1.2 without Drivers
and the DLL are from here http://forum.xda-developers.com/attachment.php?attachmentid=1937519&stc=1&d=1367761284
The SmartFlash Tool http://hotfile.com/dl/143853325/ed430ad/SFT.rar.html Password [email protected]
--If You have a Behavior Blocker on your PC, disable it ---
Install all Drivers from the LG FlashPack.
Bring your Phone to the S/W Mode, install the Drivers.
So after you installed it, go to your Device Manager on the PC and change the Comport under connections > LG Modem ..... to COM41. Disconnect your Phone.
Install the FlashTool, then Start the LGFlashTool.exe from the LG Flash Tool 1.2. Then Select Manual Mode, choose the DLL and add your AP.bin and CP.fls. Press OK. Goto the COMConnector Button and Choose the Port 1. OK. Click on the Arrowbutton , the Program will be ready. Connect your Phone in S/W Mode now to the PC. It start´s automaticly and flash´s your device new.
After your Phone is ready, check your Mobile Network, if its false,"No conenction" you have to reflash the Baseband.
Use the Smartflash Tool, bring your Phone Back to S/W, start Smartflash and connect your phone. Goto the Register Rom Copy D/L under CP Bin use the *.fls binary. Click the Button "Start" now the Smartflash flash´s the Baseband new.
Now Your Phone is NEW.
---------------------------------------------------------------
My Smartphone is Permantently Bricked, bootloop, flashtool can´t flash anything(but i have used it correctly), Kernel Error or anything else
----------- The Third Methode-------------
So Guys, this is complicated for noobs.
You need the OAMP TOOL, download it here http://forum.xda-developers.com/attachment.php?attachmentid=1937574&stc=1&d=1367763391
Now unplug your Batterie from the Phone, and connect it via USB to the PC. Now he will install the Driver, make it manual and choose the Driver from the folder usb_drv_windows, includes in the Package your downloaded.
So now if you have installed the Driver, start the "start_fastboot.bat". Choose your Phone and press the Button on your keyboard, the Tool will bring your Device to the Fastboot mode, if its write to start the mode "Pls wait 5 secondes " is now in the Screen read. Plug your batterie back to your phone.
then choose "install orginal bootloader" and follow the Steps. After you have to all, bring it back to the S/W Mode and follow Second Methode.
------------------------My S/W Mode is Gone-------------------
Follow Third Methode, but hold your vol up button permanetly , this will bring your Phone to the S/W Mode.
----------------------- Nothing goes, i think my Device is Bricked permantenly, fastboot can find any partitions or any thing else--------------------------
After i had this Problem, i fixxed it. So start Omap, choose your device. Hold permanently your Vol up button, plugg the Cable to usb and insert the Batterie. Omap brings your phone back to S/W.
Now flash your Stock Image with FlashTool, maybe 3 Times.
It works for me
----------- Other Mode KDZ_FW_UPD ---------------
i have forgot to tell you this mode. For this you need the KDZ File.
Download http://forum.xda-developers.com/attachment.php?attachmentid=1949514&stc=1&d=1368135582
Its the same methode with the LG Mobile Support Tool, but offline.
Bring your Phone to S/W Mode and connect it to the PC.
First you have to edit your hosts file. Open it and insert this 127.0.0.1 csmg.lgmobile.com
then start kdz server, start windows enabler. See at the Tryicon click on it and make it ON.
Then open UpTestEX_mod2_marwin
On the rigth side, click on select kdz file. Choose your KDZ.
On the Bottom start "normal web upgrade test"
Then Upgrade Start.
The Mobile Support Tool opens and flashs the KDZ
This was a short Guide to bring your Phone back. If You have questions so ask pls =). Btw sry for my bad English, but i hope you can understand it
Added CWM for P720 maybe P920

updated

TNX MasterTobi YOU GIVE ME A VERY GOOD IDE AND I HAVE SIVE MY DEVICE:good:

toty250 said:
TNX MasterTobi YOU GIVE ME A VERY GOOD IDE AND I HAVE SIVE MY DEVICE:good:
Click to expand...
Click to collapse
Good Job

re is a little difficult to boot in, and only stock function can shutdown the phone. hope more perfect one will come soon
Sent from my LG-SU870 using xda premium

ms2003 said:
re is a little difficult to boot in, and only stock function can shutdown the phone. hope more perfect one will come soon
Sent from my LG-SU870 using xda premium
Click to expand...
Click to collapse
to boot in what ? and what do you mean with " and only stock function can shutdown the phone"

MasterTobi said:
Hello Guys, i have to show you, how you can recover your LG P720/725 and 720H. It´s very simple. Since i have my LG P720 i have reflashed my phone so often by this step´s
there give´s 3 methodes to bring your Smarthphone back to orginal
First what do you need.
First off all you need the KDZ from your Phone and the *.cp and *.ap also the binarys
Click to expand...
Click to collapse
Hi,
How do I get the binary files?
Also, the SFT.rar file is asking for a password.
If I have the KDZ, .bin and .fls files, i can use this method to upgrade to later version of software as well ( I am on V10C on P725, I can use this method to upgrade to V10F as well)
please help.
schubeir

ok if you read the Guide you find
The SmartFlash Tool http://hotfile.com/dl/143853325/ed430ad/SFT.rar.html Password [email protected] <<<<<< Passwort
the Binary files are from the KDZ, you musst extract them with LG Extract Tool
you can Use SFT or LG Faslhtool to flash you binarys.
If You have only the KDZ Use KDZ_UP......

Good Job !!!

Dear MasterTobi, hello!
I am trying all these methods, but I can't unbrick my phone! I can enter 2 different screens for S/W Upgrade, one by normal mode, another by OMAP boot mode, bu tin anyone my phone goes live... Do I have to select the port 41 in LG Modem in Device Manager, and after this, port 1 in the LG Flahs Tool? Is it correct? When I try to do this, I got the message "Downlaod Fail" each 20 seconds in the port 1 field at the LG Flash Tool.
I tried the methods in this post and another ones, but anyone works for me. Do you have any idea?
Thank you very much!
MasterTobi said:
Hello Guys, i have to show you, how you can recover your LG P720/725 and 720H. It´s very simple. Since i have my LG P720 i have reflashed my phone so often by this step´s
there give´s 3 methodes to bring your Smarthphone back to orginal
First what do you need.
First off all you need the KDZ from your Phone and the *.cp and *.ap also the binarys
----------- S/W MODE --------------
Plugged your Batterie out of the Phone. Wait 3 seconds.
Bring it back and insert your USB Cable to the Phone. Then Hold the Volume+ Button for 6 seconds. Your S/W Mode will start.
Now Connect your Phone to the PC, maybe you must install the Driver. (There are in the LG Flash Tool Package included)
If you didn´t flashed your Phone and it´s bricked automaticly , you can use the First Methode
--------First Methode ------
Connect Your Phone via USB to the PC and bring your Phone in the S/W Mode.
Start your LGMobile Support Tool and start the Emergency Mode, it will download the KDZ and flash it new to the Phone.
You have flashed a wrong Bin or KDZ to your Phone? Or Your Bootloader is bricked, also Bootloop ? Use this Methode
---------- Second Methode-----------------
You need the "LG Flash Tool Package" and the full working "LPG720 DLL" you can get the FlashPack here p92x.acidhazardrom.com/ccount/click.php?id=15 . This Includes all relevant Drivers, install it.
and the DLL are from here http://forum.xda-developers.com/attachment.php?attachmentid=1937519&stc=1&d=1367761284
The SmartFlash Tool http://hotfile.com/dl/143853325/ed430ad/SFT.rar.html Password [email protected]
--If You have a Behavior Blocker on your PC, disable it ---
Install all Drivers from the LG FlashPack.
Bring your Phone to the S/W Mode, install the Drivers.
So after you installed it, go to your Device Manager on the PC and change the Comport under connections > LG Modem ..... to COM41. Disconnect your Phone.
Install the FlashTool, then Start the LGFlashTool.exe from the LG Flash Tool 1.2. Then Select Manual Mode, choose the DLL and add your AP.bin and CP.fls. Press OK. Goto the COMConnector Button and Choose the Port 1. OK. Click on the Arrowbutton , the Program will be ready. Connect your Phone in S/W Mode now to the PC. It start´s automaticly and flash´s your device new.
After your Phone is ready, check your Mobile Network, if its false,"No conenction" you have to reflash the Baseband.
Use the Smartflash Tool, bring your Phone Back to S/W, start Smartflash and connect your phone. Goto the Register Rom Copy D/L under CP Bin use the *.fls binary. Click the Button "Start" now the Smartflash flash´s the Baseband new.
Now Your Phone is NEW.
---------------------------------------------------------------
My Smartphone is Permantently Bricked, bootloop, flashtool can´t flash anything(but i have used it correctly), Kernel Error or anything else
----------- The Third Methode-------------
So Guys, this is complicated for noobs.
You need the OAMP TOOL, download it here http://forum.xda-developers.com/attachment.php?attachmentid=1937574&stc=1&d=1367763391
Now unplug your Batterie from the Phone, and connect it via USB to the PC. Now he will install the Driver, make it manual and choose the Driver from the folder usb_drv_windows, includes in the Package your downloaded.
So now if you have installed the Driver, start the "start_fastboot.bat" follow the Steps. BUT we choose press now the the Button 1 on your keyboard, the Tool will bring your Device to the Fastboot mode, if its write to start the mode "Pls wait 5 secondes " is now in the Screen read. Plug your batterie back to your phone.
then choose "install orginal bootloader" and follow the Steps. After you have to all, bring it back to the S/W Mode and follow Second Methode.
------------------------My S/W Mode is Gone-------------------
Follow Third Methode, but hold your vol up button permanetly , this will bring your Phone to the S/W Mode.
----------------------- Nothing goes, i think my Device is Bricked permantenly, fastboot can find any partitions or any thing else--------------------------
After i had this Problem, i fixxed it. So start Omap, choose your device. Hold permanently your Vol up button, plugg the Cable to usb and insert the Batterie. Omap brings your phone back to S/W.
Now flash your Stock Image with FlashTool, maybe 3 Times.
It works for me
----------- Other Mode KDZ_FW_UPD ---------------
i have forgot to tell you this mode. For this you need the KDZ File.
Download http://forum.xda-developers.com/attachment.php?attachmentid=1949514&stc=1&d=1368135582
Its the same methode with the LG Mobile Support Tool, but offline.
Bring your Phone to S/W Mode and connect it to the PC.
First you have to edit your hosts file. Open it and insert this 127.0.0.1 csmg.lgmobile.com
then start kdz server, start windows enabler. See at the Tryicon click on it and make it ON.
Then open UpTestEX_mod2_marwin
On the rigth side, click on select kdz file. Choose your KDZ.
On the Bottom start "normal web upgrade test"
Then Upgrade Start.
The Mobile Support Tool opens and flashs the KDZ
This was a short Guide to bring your Phone back. If You have questions so ask pls =). Btw sry for my bad English, but i hope you can understand it
Click to expand...
Click to collapse

yes you have to use the DLL from the first post, include it in flashtool "select Model from DLL " or so. in the screen you can change your bin files

Wellington.BK said:
Dear MasterTobi, hello!
I am trying all these methods, but I can't unbrick my phone! I can enter 2 different screens for S/W Upgrade, one by normal mode, another by OMAP boot mode, bu tin anyone my phone goes live... Do I have to select the port 41 in LG Modem in Device Manager, and after this, port 1 in the LG Flahs Tool? Is it correct? When I try to do this, I got the message "Downlaod Fail" each 20 seconds in the port 1 field at the LG Flash Tool.
I tried the methods in this post and another ones, but anyone works for me. Do you have any idea?
Thank you very much!
Click to expand...
Click to collapse
You can follow this guide which works for All OS versions of Windows .
If you need any help, you can post there http://forum.xda-developers.com/showthread.php?t=2246001

Sorry, but if I use your DLl, I got the message "Model Name is different! Chel phone or DLL!".
Also, I tried the smartflash tool, selecting the ap and cp. At the ending, appears a mesage "Magic number doesn't concide".
And finally, I tried the "Normal web upgrade test". This one looked as my phone would return to life, but not...
In any of methods I could turn on the phone. I don't know what I can do know. I am very, very afraid...
MasterTobi said:
yes you have to use the DLL from the first post, include it in flashtool "select Model from DLL " or so. in the screen you can change your bin files
Click to expand...
Click to collapse
---------- Post added at 01:16 AM ---------- Previous post was at 01:11 AM ----------
Dear Kahale,
The method didn't work for me... I don't know why, I don't know what else more I can do... If you have a light for me, please...
Thanks!
Karim Kahale said:
You can follow this guide which works for All OS versions of Windows .
If you need any help, you can post there http://forum.xda-developers.com/showthread.php?t=2246001
Click to expand...
Click to collapse

This guide is for P720, right? not Optimus 3D.
@wellington, which phone do you have?
Karim's guide is not for 3D Max, right???

drastic00 said:
This guide is for P720, right? not Optimus 3D.
@wellington, which phone do you have?
Karim's guide is not for 3D Max, right???
Click to expand...
Click to collapse
My guide is similar to the Resurrection guide which supports 3D MAX, the difference is that I've added some different steps and a slightly different method.

My phone is a 3D MAX, a P725.
Tx!
drastic00 said:
This guide is for P720, right? not Optimus 3D.
@wellington, which phone do you have?
Karim's guide is not for 3D Max, right???
Click to expand...
Click to collapse

Ok then, good luck!

Never mind.
Sent from my LG-P720 using xda premium

oh guys...............
so you have a magic number ........ strange, there is only the error if you have a wrong version
you have to download the LGP720AT-00-V10e-EUR-XXX-JUL-17-2012+0_AP this is for the P720/P725 alias 3D MAX

Success!
Hey people! I got success! After many days trying, I unbricked my phone! I will tell you what I did.
- My phone is a P725. I don’t know exactly where is it from. This information (P725) was very important for me in the unbricking process.
- I used the LG Flash Tool 1.3.77.21 (http://forum.xda-developers.com/attachment.php?attachmentid=984864&d=1333650043).
- Now, the two cheats that helped me to unbrick my phone:
1st: I didn’t use the .dll from the first page of this post, and I didn’t use the .dll, .bin and .fls extracted from the KDZ gotten from the IMEI of the phone. They didn’t work for me. I googled for these files for P725AT, which was the model that LG Flash Tool was telling me that is my phone. I found the following files:
http://freakshare.com/files/e6xssy95/BIN_LGP725AT-00-V10b-ARB-XXX-MAY-08-2012-0.zip.html
http://uploaded.net/file/v6orqts2
2nd: At the flashing process, there is a pause at 80% telling that the phone will reset. In some cases, the reset really occurs, but in my case, the reset didn’t occur. A lot of errors appeared (see the image), but no problem. I just turned on my phone, and BINGO! It was working again.
It’s important to tell that I had to put my phone in download mode using the OMAP TOOL, that can be found in the first page of this post (http://forum.xda-developers.com/attachment.php?attachmentid=1937574&stc=1&d=1367763391). Don’t forget to change the LG USB COM Port to 41.
That is my history! I hope that this help someone. I would like to thank everybody who wrote about the brick of this phone (MasterTobi, Karim Kahale, Eklovya Dutta [I'm not certain of how to link for them, sorry!] and anybody else), I believe that is one of the worsts bricks in smartphones…
Good luck for all!
EDIT:
I forgot to tell: all the process was made in a Windows 8 64 bit. It gave me some difficults to install all the drivers, but it is possible, Google it and found how to.

Big problem.

Hello. I`m new on this forum. Recenlty, i have bought a second hand Optimus 3d. It worked well one week but when i tried to install a custom rom and the phone has broken. I rooted it, then i installed rom manager from google play. When i reboot it to recovery from program it has bricked. I recovery it with lg tool. But now it does`nt recognize the sim. I tried the solutions from other threads but no result. I can`t flash a kdz file. When i enter in the application it says that not responding and it close. Now, lg tool doesn`t work. It didn`t recognize the imei. Tutty didn`t work becouse the the driver doesn`t install. I can use the phone but no service. The wifi doesn`t work well, i can`t download. Sorry for my bad english.

R u on froyo
Sent from my Nexus 4 using xda app-developers app

No, now i have 2.3.5.

Try this
http://forum.xda-developers.com/showthread.php?t=1942836
Install 21E (GB) may be that your emei will be back, otherwise use tutty.
O3d is ubrickable!

What means that the wifi indicator is white instead of beeing green?

sanlenas said:
What means that the wifi indicator is white instead of beeing green?
Click to expand...
Click to collapse
Make sure that sim card is in the correct way . The shaped end is toward the battery.
Connect phone to PC with usb cable, Use lg software updater from lg website to completely reload a new system. Once installed on your pc click update usb drivers and let that load in. Run the updater tool,you have to select rescue phone from the menu. When your phone is recognized put in your imei and the updater will load in ICS (4.0.4). If it stalls at loading 6%, quickly unplug usb and plug it back in.
Good luck.

The program didn`t recognize the imei becouse the phone doesn`t have imei now and i can`t put it becouse the pc don`t install the driver of the device creeated by the code said by tutorial who use tutty.

did you type in your imei number in the imei box and then select the search button. Your imei number is in the battery compartment of your phone.

[Tutorial][MTK] IMEI Repair Solution for Moto C Plus XT1721

IMEI Repair Solution for Moto C Plus XT1721​
A common problem many face in their phone is loss of IMEI no. This is results in no network detection by your phone. U can come to know you have lost your IMEI by checking Settings->About phone->Phone information. There under IMEI section you won’t be finding your mobile IMEI numbers displayed.
Don’t worry you can restore your IMEI’s. Just follow this guide and you will be able to restore your IMEI.
Code:
Exclusive method for fix null IMEI or restore IMEI on Moto C Plus xt1721 only
REQUIREMENTS:
-Need some files
-Patience
-Working brain
INSTRUCTIONS ​
1. First flash Moto C Plus stock rom..choose Format+download on Sp tool
2. Download MauiMETA_exe and install the tool
3. Download Mtk_CDC driver and install it. this is very important driver for MauiMETA tool if u have already just skip this step.
4. Run MauiMETA tool, click on Reconnect
5. Switch off your phone and connect through USB, without press any button.( U need to first power off and remove battery and insert the battery then connect to USB, pls dont press any buttons while connecting phone)
6. Wait for MauiMETA tool detect the phone.((connect phone via USB, wait windows 2nd beep of driver detection.,now keep pressing vol- key ,,it should detect,, try this if automatically not detected))
7. Next, select IMEI download, then click change nvram database,,select the proper data base from stock rom or from HERE.
8. Next write both (SIM1 & SIM2) Original IMEI. OR click on load from file download file from HERE.
9. Next hit download to target.
10. Aand wait,, if it shows error window, just ignore that , disconnect USB and power on the device.
11. NOw check IMEI by *#06# ,and see u got both IMEI,,`:good:
<<IMAGE INSTRUCTIONS AVILABLE>>​
____ENJOY____ ​
CREDITS:
-It's my own work to fix IMEI all credits goes to shr!pad
-Thanks for MauiMETA Tools
If u feel this Tutorial is helpful hit thanks button​

ChinmayDalal said:
No dude it isn't working..
There was no error in sp flash tool, stilll my IMEI is 0000000000
I should mention that i had once used format all+ download to fix my bootloop (wrote about it earlier).
---------- Post added at 06:05 PM ---------- Previous post was at 06:03 PM ----------
Can I try flashing the image in twrp?
Now I won't do anything without asking
EDIT: yes, it is working now. Had to run that echo command again, with a modification in the path : it is dev/radio/pttycmd1
Thanks a lot , dude
You the man:highfive:
Click to expand...
Click to collapse
welcome..
u got recovery boot-loop bcs..u rebooted device in NO OS INSTALLED warning!! in TWRP recovery
it happens this time

ChinmayDalal said:
No dude it isn't working..
There was no error in sp flash tool, stilll my IMEI is 0000000000
I should mention that i had once used format all+ download to fix my bootloop (wrote about it earlier).
---------- Post added at 06:05 PM ---------- Previous post was at 06:03 PM ----------
Can I try flashing the image in twrp?
Now I won't do anything without asking
EDIT: yes, it is working now. Had to run that echo command again, with a modification in the path : it is dev/radio/pttycmd1
Thanks a lot , dude
You the man:highfive:
Click to expand...
Click to collapse
welcome..
u got recovery boot-loop bcs..u rebooted device in NO OS INSTALLED warning!! in TWRP recovery
it happens this time

shr!pad said:
Tutorial for restore lost IMEI on Moto_C_Plus
A common problem many face in their phone is loss of IMEI no. This is results in no network detection by your phone. U can come to know you have lost your IMEI by checking Settings->About phone->Phone information. There under IMEI section you won’t be finding your mobile IMEI numbers displayed.
Don’t worry you can restore your IMEI’s. Just follow this guide and you will be able to restore your IMEI.
REQUIREMENTS:
-Need some files provided in downloads
-Patience
-Working brain
INSTRUCTIONS
1.Download required files from downloads & extract the zip.
2.Open download tool and choose required files.
3.Load the scatter-file found in the provided file.. select preloader only..but don't flash it.
4. Click Alt + Ctrl + V to activate advanced mode in sp flash tool.
5.Click on "window" up there and select "write mode"
6. Change the Begin address to "0x380000" and click on "file path" and choose the nvram.img from extracted provided zip file
7. Click on "write Memeory", then Power off your device and remove the battery.. press and hold vol- button, then connect phone to pc via USB cable.. press &hold vol- key until pc detect...wait for Write memory ok window appears.
8.Now power on your device.
9.CONGRATULATIONS!! Now IMEI is restored successfully.
<<IMAGE INSTRUCTIONS AVILABLE>>
____ENJOY____
DOWNLOADS:
IMEI fix tool
CREDITS:
-It's my own work to fix IMEI all credits goes to ME
-If u like my work hit thanks button
Click to expand...
Click to collapse
I almost tried everything but none of them worked:crying:

It can't detect my phone before the format+download step my phone bricked so I install the stock ROM and tried to repair imei but it still didn't working bro help me :crying::crying:
---------- Post added at 11:53 AM ---------- Previous post was at 11:51 AM ----------
ChinmayDalal said:
No dude it isn't working..
There was no error in sp flash tool, stilll my IMEI is 0000000000
I should mention that i had once used format all+ download to fix my bootloop (wrote about it earlier).
---------- Post added at 06:05 PM ---------- Previous post was at 06:03 PM ----------
Can I try flashing the image in twrp?
Now I won't do anything without asking
EDIT: yes, it is working now. Had to run that echo command again, with a modification in the path : it is dev/radio/pttycmd1
Thanks a lot , dude
You the man:highfive:
Click to expand...
Click to collapse
How did you did it pls tell me I have same problem pls pls

Pramzcthapa said:
I almost tried everything but none of them worked:crying:
Click to expand...
Click to collapse
Guide updated...so try this method

ChinmayDalal said:
This post (the updated one) gives a permanent solution.
However, if it doesn't work, then search Google for ' repair IMEI using terminal'. In that method, replace /dev/block with /dev/radio.
But if you follow my method, you will sometimes lose IMEI after a reboot, which is fixed by rebooting again. That's why, try @shr!pad's method first.
Hope it helps
Click to expand...
Click to collapse
Pls describe you're method bro my imei is failed you're terminal method

ChinmayDalal said:
See the screenshot.
But instead of writing /dev/pttycmd1, write /dev/radio/pttycmd1
Hit thanks if it helped
Click to expand...
Click to collapse
Tried but failed IMEI 000000000000000
and showing 1 IMEI number my phone model is Moto C plus pls help me

Shepotter# said:
Pls describe you're method bro my imei is failed you're terminal method
Click to expand...
Click to collapse
Try, i mentioned method in post...i should works 100%..

Shepotter# said:
Tried but failed IMEI 000000000000000
and showing 1 IMEI number my phone model is Moto C plus pls help me
Click to expand...
Click to collapse
Correctly follow the guide... Dont skip any step...it should works

hey，can.....videos？

give me the old nvram.img
give me the old nvram.img method urgently please

Shepotter# said:
Pls describe you're method bro my imei is failed you're terminal method
Click to expand...
Click to collapse
IF TERMINAL method not worked,, follow guide and read once from first,,
for that u need stock rom firmware,, u can get here
https://drive.google.com/uc?id=1hcfp1j-yzhXqcV9yoNQwVDsHecRpACH0&export=download

shr!pad said:
IMEI Repair Solution for Moto C Plus XT1721​
A common problem many face in their phone is loss of IMEI no. This is results in no network detection by your phone. U can come to know you have lost your IMEI by checking Settings->About phone->Phone information. There under IMEI section you won’t be finding your mobile IMEI numbers displayed.
Don’t worry you can restore your IMEI’s. Just follow this guide and you will be able to restore your IMEI.
Code:
Exclusive method for fix null IMEI or restore IMEI on Moto C Plus xt1721 only
REQUIREMENTS:
-Need some files
-Patience
-Working brain
INSTRUCTIONS ​
1. First flash Moto C Plus stock rom..choose Format+download on Sp tool
2. Download MauiMETA_exe and install the tool
3. Download Mtk_CDC driver and install it. this is very important driver for MauiMETA tool if u have already just skip this step.
4. Run MauiMETA tool, click on Reconnect
5. Switch off your phone and connect through USB, without press any button.( U need to first power off and remove battery and insert the battery then connect to USB, pls dont press any buttons while connecting phone)
6. Wait for MauiMETA tool detect the phone.((connect phone via USB, wait windows 2nd beep of driver detection.,now keep pressing vol- key ,,it should detect,, try this if automatically not detected))
7. Next, select IMEI download, then click change nvram database,,select the proper data base from stock rom or from HERE.
8. Next write both (SIM1 & SIM2) Original IMEI. OR click on load from file download file from HERE.
9. Next hit download to target.
10. Aand wait,, if it shows error window, just ignore that , disconnect USB and power on the device.
11. NOw check IMEI by *#06# ,and see u got both IMEI,,`:good:
<<IMAGE INSTRUCTIONS AVILABLE>>​
____ENJOY____ ​
CREDITS:
-It's my own work to fix IMEI all credits goes to shr!pad
-Thanks for MauiMETA Tools
If u feel this Tutorial is helpful hit thanks button​
Click to expand...
Click to collapse
Hi sir,i tried this method but it showed failure(cannot find the kernel USB compost for AP and Modem handshake) and i even tried SN Writer that also got stuck on searching kernel com port and hankshake..
i have installed the cdc drivers.
and i have got TWRP on my phone with stock rom
so should i unroot my phone for this method
and also i have seen on YT that there is another method by using sp tools,flashing nvram.bin.
so sir i was wondering if you can send me your nvram.bin file and somehow i could modify it and add my Imei/wifi add./BT add. to it and flash the modified nvram.bin on my phone[is that possible ?]

[email protected]@k said:
Hi sir,i tried this method but it showed failure(cannot find the kernel USB compost for AP and Modem handshake) and i even tried SN Writer that also got stuck on searching kernel com port and hankshake..
i have installed the cdc drivers.
and i have got TWRP on my phone with stock rom
so should i unroot my phone for this method
and also i have seen on YT that there is another method by using sp tools,flashing nvram.bin.
so sir i was wondering if you can send me your nvram.bin file and somehow i could modify it and add my Imei/wifi add./BT add. to it and flash the modified nvram.bin on my phone[is that possible ?]
Click to expand...
Click to collapse
this guide for only stock rom means stock recovery, and no patches to boot.img... u should flash stock rom before this method. [fresh stock rom needed]
sp-flash tool method dont work's on moto c plus(nvram.bin).. sn-writer also dont work's.

shr!pad said:
IMEI Repair Solution for Moto C Plus XT1721​
A common problem many face in their phone is loss of IMEI no. This is results in no network detection by your phone. U can come to know you have lost your IMEI by checking Settings->About phone->Phone information. There under IMEI section you won’t be finding your mobile IMEI numbers displayed.
Don’t worry you can restore your IMEI’s. Just follow this guide and you will be able to restore your IMEI.
Code:
Exclusive method for fix null IMEI or restore IMEI on Moto C Plus xt1721 only
REQUIREMENTS:
-Need some files
-Patience
-Working brain
INSTRUCTIONS ​
1. First flash Moto C Plus stock rom..choose Format+download on Sp tool
2. Download MauiMETA_exe and install the tool
3. Download Mtk_CDC driver and install it. this is very important driver for MauiMETA tool if u have already just skip this step.
4. Run MauiMETA tool, click on Reconnect
5. Switch off your phone and connect through USB, without press any button.( U need to first power off and remove battery and insert the battery then connect to USB, pls dont press any buttons while connecting phone)
6. Wait for MauiMETA tool detect the phone.((connect phone via USB, wait windows 2nd beep of driver detection.,now keep pressing vol- key ,,it should detect,, try this if automatically not detected))
7. Next, select IMEI download, then click change nvram database,,select the proper data base from stock rom or from HERE.
8. Next write both (SIM1 & SIM2) Original IMEI. OR click on load from file download file from HERE.
9. Next hit download to target.
10. Aand wait,, if it shows error window, just ignore that , disconnect USB and power on the device.
11. NOw check IMEI by *#06# ,and see u got both IMEI,,`:good:
<<IMAGE INSTRUCTIONS AVILABLE>>​
____ENJOY____ ​
CREDITS:
-It's my own work to fix IMEI all credits goes to shr!pad
-Thanks for MauiMETA Tools
If u feel this Tutorial is helpful hit thanks button​
Click to expand...
Click to collapse
THANK YOU VERY VERY MUCH... You are the great man abd XDA is my first and best forum..
Thanks a lot Mr shr!pad... allah bless you.. good and good and good is sda...
This method simply resolve my pblm... doogee X9 S (pro). your guide is simple and clear but precis. merci beaucoup
شكرا جزيلا
و الشكر موصول ل xda
You are tha best in all the world.

ferryel said:
THANK YOU VERY VERY MUCH... You are the great man abd XDA is my first and best forum..
Thanks a lot Mr shr!pad... allah bless you.. good and good and good is sda...
This method simply resolve my pblm... doogee X9 S (pro). your guide is simple and clear but precis. merci beaucoup
شكرا جزيلا
و الشكر موصول ل xda
You are tha best in all the world.
Click to expand...
Click to collapse
thank you :highfive:

shr!pad said:
IMEI Repair Solution for Moto C Plus XT1721​
A common problem many face in their phone is loss of IMEI no. This is results in no network detection by your phone. U can come to know you have lost your IMEI by checking Settings->About phone->Phone information. There under IMEI section you won’t be finding your mobile IMEI numbers displayed.
Don’t worry you can restore your IMEI’s. Just follow this guide and you will be able to restore your IMEI.
Code:
Exclusive method for fix null IMEI or restore IMEI on Moto C Plus xt1721 only
REQUIREMENTS:
-Need some files
-Patience
-Working brain
INSTRUCTIONS ​
1. First flash Moto C Plus stock rom..choose Format+download on Sp tool
2. Download MauiMETA_exe and install the tool
3. Download Mtk_CDC driver and install it. this is very important driver for MauiMETA tool if u have already just skip this step.
4. Run MauiMETA tool, click on Reconnect
5. Switch off your phone and connect through USB, without press any button.( U need to first power off and remove battery and insert the battery then connect to USB, pls dont press any buttons while connecting phone)
6. Wait for MauiMETA tool detect the phone.((connect phone via USB, wait windows 2nd beep of driver detection.,now keep pressing vol- key ,,it should detect,, try this if automatically not detected))
7. Next, select IMEI download, then click change nvram database,,select the proper data base from stock rom or from HERE.
8. Next write both (SIM1 & SIM2) Original IMEI. OR click on load from file download file from HERE.
9. Next hit download to target.
10. Aand wait,, if it shows error window, just ignore that , disconnect USB and power on the device.
11. NOw check IMEI by *#06# ,and see u got both IMEI,,`:good:
<<IMAGE INSTRUCTIONS AVILABLE>>​
____ENJOY____ ​
CREDITS:
-It's my own work to fix IMEI all credits goes to shr!pad
-Thanks for MauiMETA Tools
If u feel this Tutorial is helpful hit thanks button​
Click to expand...
Click to collapse
will this work for moto c?
my device is stuck at 000000000000000 imei help....
my device is xt1755 and shows mt6737m in sp flash tool.

AdwayPratap said:
will this work for moto c?
my device is stuck at 000000000000000 imei help....
my device is xt1755 and shows mt6737m in sp flash tool.
Click to expand...
Click to collapse
Yes same method follow for moto c , but 1 thing remember , i given moto c plus "Modem database", just choose your device "Modem Database" file that's all,, same method will work,, Good luck,
thank you.

shr!pad said:
Yes same method follow for moto c , but 1 thing remember , i given moto c plus "Modem database", just choose your device "Modem Database" file that's all,, same method will work,, Good luck,
thank you.
Click to expand...
Click to collapse
I tried everything in your tutorial and have mtk drivers installed but I skipped the mtk CDC drivers because I can flash in sp flash tool, no problem in my device detection....
When I write imei and download to flash it says download to flash successfully ...
Still the imei is the same.
Please help me get the imei back.
Any sort of help will be appreciated....

[Guide] Unbrick Your UNLOCKED Lenovo P2a42

Hey Friends,
You must have seen very good days with Lenovo P2 but when there comes a bad day when your phone stops responding to button holds and restarts. You may or may not have a clue what to do to get your phone working again just like before.
I got into this situation where only thing my phone was able to operate was a RED LED on connecting it to my laptop. Then I had to read tens of pages on XDA to find answers to all my questions. If you are in such a situation and your phone is UNLOCKED then you have come to the right place. Procedure is quite simple but remember, I am writing this guide to define complete process from blackout to complete update so follow this guide as per your needs.
I faced this situation of Total Blackout / Dead Phone (Almost) with only Red LED working and it can be very scary. So, here is the simplest procedure you can follow. I want to appreciate all those people who helped me in finding a way to boot my phone with each and everything working. Long story short, let's get this done.
Tools Required:
I am mentioning here all the Tools you will need. I will urge you to download and save these tools in case you want to unbrick your phone any time:
1. Minimal ADB and Fastboot setup for PC
2. Lenovo USB drivers v1.1.33
3. Qualcomm USB Drivers
4. Qualcomm Flash Image Loader (QFIL) v2.0.1.9 for your PC in case you have corrupted your phone's IMEI and/ or Baseband
5. Blankflash.bat in case you want to recover from total blackout (Attached)
6. Stock MM S048 Firmware for Lenovo P2 in case phone doesn't boot
7. S048_ModemTelephony.zip in case your phone boots through Stock MM S048 but SIM isn't detected and IMEI is missing. I have made a complete modem zip file for installation through recovery.
8. S251_ModemTelephony.zip in case your phone is on latest firmware and doesn't detect SIM and has lost IMEI. I have made a complete modem zip file for installation through recovery.
9. QCN file for recovering baseband version and giving you most precious network signals. (Attached)
10. WinRAR or PeaZip for uncompressing files
I will recommend you to have a specific folder for keeping all these tools in a single place.
Procedure for Unbricking:
Before going with the procedure, make sure you have downloaded all the files you need, updated Lenovo and Qualcomm drivers etc. Here is the procedure:
1. If total blackout with red LED notification when connecting to PC: Unzip blankflash.zip to a folder in C drive. Now connect your P2 to PC through USB, press volume+, volume- and power button simultaneously and double click blankflash.bat. You might have no success in your first try. Just keep trying and it will load your phone to Fastboot. Restart your phone in TWRP if installed and install a working ROM for your phone after doing a wipe. If all is good and phone works OK then great but if you have lost IMEI and baseband then it is better to reinstate your phone through first MM stock ROM S048
2. Install S048 firmware through Minimal ADB and Fastboot - use flash instructions in .txt file.
3. Wait for startup of phone. Check if fingerprint, BT, WIFI and SIM work if all work then OK.
4. If fingerprint, BT, WIFI and SIM are not working then check IMEI through dialer. Dial *#06#. If IMEI is not available then install latest TWRP through Fastboot.
5. Start P2 in TWRP recovery and install S048_ModemTelephony.zip. Restart phone to see if WIFI and SIM work.
6. If SIM is detected but not giving signals and Baseband is shown as unknown then extract 000000_0.qcn file given in .7z and restore through QFIL and restart your phone into Fastboot.
7. Now, install stock recovery of S048 firmware through Fastboot and restart your phone.
8. Use your phone like you normally do and update your P2 till firmware S251 and see if everything works including calls. Update your phone through OTA.
9. After OTA installation, stock recovery may say that update failed. Just press Back, go into Wipe user data menu and Wipe Cache only. Restart your phone which will be updated to latest version and will ask you to update to a newer version. Allow it to download the next update.
10. After installation of S251 update, install latest TWRP through Fastboot and install most recent version of LOS 16 so that your vendor partition is stable and free from any bloated files. Now, use your phone just like you want to.
If you need further clarification then ask in this thread.

Bro my phone is not unlocked can i try thz one

Ranji007 said:
Bro my phone is not unlocked can i try thz one
Click to expand...
Click to collapse
You should download S048 and use flashall.bat inside that archive to install it all. However, if you lose IMEI or baseband then you can use modem and qcn files given in this thread.

alirazaagha said:
You should download S048 and use flashall.bat inside that archive to install it all. However, if you lose IMEI or baseband then you can use modem and qcn files given in this thread.
Click to expand...
Click to collapse
Bro now i wanna use ...minimal adb ..my phone is totally bricked only red light glowing

Ranji007 said:
Bro now i wanna use ...minimal adb ..my phone is totally bricked only red light glowing
Click to expand...
Click to collapse
don't worry just flash blank flash from the link given in the op, you will get the bootloader back

hackiee said:
don't worry just flash blank flash from the link given in the op, you will get the bootloader back
Click to expand...
Click to collapse
Bro how to connect my phone to blank flash...can u PLZZ help

hackiee said:
don't worry just flash blank flash from the link given in the op, you will get the bootloader back
Click to expand...
Click to collapse
Laptop is not detecting my device bro i installed all lenovo and Qualcomm drivers...any idea

Ranji007 said:
Laptop is not detecting my device bro i installed all lenovo and Qualcomm drivers...any idea
Click to expand...
Click to collapse
If red light blinks, your phone can be detected by your laptop. Check ports in device manager settings and you'll see a new port with Qualcomm 9800 series number. If that's there, try blankflash to start in fastboot. It might need some tries before startup. Be patient and keep trying till you are in fastboot.

alirazaagha said:
If red light blinks, your phone can be detected by your laptop. Check ports in device manager settings and you'll see a new port with Qualcomm 9800 series number. If that's there, try blankflash to start in fastboot. It might need some tries before startup. Be patient and keep trying till you are in fastboot.
Click to expand...
Click to collapse
Bro ..thanks for reply....in my phone red blink is glowing continuously ..but after connecting there is no change...can u say which buttons i want to press?

Ranji007 said:
Bro ..thanks for reply....in my phone red blink is glowing continuously ..but after connecting there is no change...can u say which buttons i want to press?
Click to expand...
Click to collapse
Press Volume+, Volume- and Power simultaneously and double click flashblank.bat. It might take some tries to finally install the scripts and start phone in fastboot. It took me 20+ tries to finally detect my phone through blankflash. Please, read OP completely.

alirazaagha said:
Press Volume+, Volume- and Power simultaneously and double click flashblank.bat. It might take some tries to finally install the scripts and start phone in fastboot. It took me 20+ tries to finally detect my phone through blankflash. Please, read OP completely.
Click to expand...
Click to collapse
Bro we want to connect each time removing usb cable and connect again like that ..we wanna do 20 times??

Ranji007 said:
Bro we want to connect each time removing usb cable and connect again like that ..we wanna do 20 times??
Click to expand...
Click to collapse
No. Keep USB connected. Try blankflash. If it doesn't detect phone or go ahead. Close command terminal, double click again and keep doing it till it processes the files. If it is stuck somewhere. Close terminal and try again.

alirazaagha said:
No. Keep USB connected. Try blankflash. If it doesn't detect phone or go ahead. Close command terminal, double click again and keep doing it till it processes the files. If it is stuck somewhere. Close terminal and try again.
Click to expand...
Click to collapse
Bro is there any solution ..i continuously pressed volume and power buttons connected to laptop and opening blank flash continuously for number of times ...but there was no reaction...only waiting for device is showing ? on my pc ...

Ranji007 said:
Bro is there any solution ..i continuously pressed volume and power buttons connected to laptop and opening blank flash continuously for number of times ...but there was no reaction...only waiting for device is showing ? on my pc ...
Click to expand...
Click to collapse
Check if your USB cable is alright and appropriate drivers are installed. Otherwise reinstall drivers, restart your PC and try again.

alirazaagha said:
Check if your USB cable is alright and appropriate drivers are installed. Otherwise reinstall drivers, restart your PC and try again.
Click to expand...
Click to collapse
Bro we want to change any settings in device manager ...?

Ranji007 said:
Bro we want to change any settings in device manager ...?
Click to expand...
Click to collapse
No. Just update drivers.

alirazaagha said:
No. Just update drivers.
Click to expand...
Click to collapse
Bro when u take to service center they said for u motherboard problem or something??

Ranji007 said:
Bro when u take to service center they said for u motherboard problem or something??
Click to expand...
Click to collapse
Fortunately, I never took it there.

alirazaagha said:
Fortunately, I never took it there.
Click to expand...
Click to collapse
My phone was fallen in water then i changed the display..few days after it stopped working ..and when i take to serive centre they said to change motherboard..but it's the 80% of phone price...so iam here ?..iam trying thiz method

Ranji007 said:
My phone was fallen in water then i changed the display..few days after it stopped working ..and when i take to serive centre they said to change motherboard..but it's the 80% of phone price...so iam here ..iam trying thiz method
Click to expand...
Click to collapse
I think you might have damaged some hardware. But anyway if you want to use blankflash, I have a method.
In lenovo p2 we have another mode called QDloader mode, in which we can use blankflash. For entering into this mode, it's little tricky but, can enter in one or two go.
So, here's how:
1. Switch off the mobile.
2. Press the volume up key,
3. While holding the volume up key, insert the usb cable and at the same time press the power button (this is the trick, we have to insert and hit at the same time).
And voila! :highfive: you will see black screen with only red notification led blinking.
we are into QDloader mode. Now use blankflash :good: