Related
As the title says. I'm looking for a kernel that allows overclocking. I've been looking for a long time but I can't find any. SiyahKernel appears to only work with the i9300 and 4.1. Unless I'm wrong. Thanks.
Also, is CM 10.0 android 4.1? Because im cool with switching to that if it will work with Siyah.
uromastix87 said:
As the title says. I'm looking for a kernel that allows overclocking. I've been looking for a long time but I can't find any. SiyahKernel appears to only work with the i9300 and 4.1. Unless I'm wrong. Thanks.
Also, is CM 10.0 android 4.1? Because im cool with switching to that if it will work with Siyah.
Click to expand...
Click to collapse
Anything you intend to flash is in the Verizon Galaxy SIII Dev or Original Dev section. Do not flash anything labeled for any other GSIII model, you'll brick your phone. I'm certain each custom kernel allows for OCing, you can find most in the Verizon Original Dev section.
CM10 is 4.1. You need to flash CM10.1 which is 4.2.2 because 4.2.2 is under active development. Something to note, flash kernels released either AFTER the date of your rom/nightly OR within a week or two week span. Often enough, there are updates in the rom source that render kernels prior to the rom's release incompatible. You'll know it's incompatible cuz after flashing your screen will be completely black when booting into the rom.
Sent from my SCH-I535 using Tapatalk 4 Beta
SlimSnoopOS said:
Anything you intend to flash is in the Verizon Galaxy SIII Dev or Original Dev section. Do not flash anything labeled for any other GSIII model, you'll brick your phone. I'm certain each custom kernel allows for OCing, you can find most in the Verizon Original Dev section.
CM10 is 4.1. You need to flash CM10.1 which is 4.2.2 because 4.2.2 is under active development. Something to note, flash kernels released either AFTER the date of your rom/nightly OR within a week or two week span. Often enough, there are updates in the rom source that render kernels prior to the rom's release incompatible. You'll know it's incompatible cuz after flashing your screen will be completely black when booting into the rom.
Sent from my SCH-I535 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thanks for the reply.
So, even if the rom was intended for an i9300 it will work on my 535? Are there any kernels for 4.2.2 that allow OCing?
Will this work with my setup? http://forum.xda-developers.com/showthread.php?t=2226894
Hi there mates,
I finally decided to dump the stock ROM and give it a try on custom one.
After reading a bit i think i'm starting to like Cyanogen, but since i want a good stable ROM i appreciated some opinions form anyone who is using it.
1st and really important: my stock ROM does not have any of the know issues (deep sleep probs, random reboots, battery drains etc...) so anyone know if CM 9.x stable have any of this issues?
2nd does everything work? In the CM forums i found no one complaining with "loosing" functionality's but i would like to ear from anyone that uses this on a daily basis. (i found a lot of people complaining with encryption problem and bad flashing but not about Wifi radio, camera, etc...)
3rd: Is this the best choice to use on a daily basis? Or there is a better/more stable/more fluid Rom?
Thanks to all.
Most of the CM 10.x ROMs are pretty stable and usable. I am a fan of the KatKiss ROMs. 4.2.2 has the best functionality, but the 4.3 variant is not bad. The only thng that does not work for me is camera on Skype.
+1 for KatKiss #226
http://forum.xda-developers.com/showthread.php?t=2362764
frederuco said:
Most of the CM 10.x ROMs are pretty stable and usable. I am a fan of the KatKiss ROMs. 4.2.2 has the best functionality, but the 4.3 variant is not bad. The only thng that does not work for me is camera on Skype.
Click to expand...
Click to collapse
Thks for the info but now im confused...
You mentioned that Skype cant use the front cam. Is that on CM stable roms or the KatKiss ones? Im asking because i use skype a lot and that is an issue to me. :/
Sent from my Transformer TF101
Exnor said:
Thks for the info but now im confused...
You mentioned that Skype cant use the front cam. Is that on CM stable roms or the KatKiss ones? Im asking because i use skype a lot and that is an issue to me. :/
Sent from my Transformer TF101
Click to expand...
Click to collapse
On KatKiss 4.3 the camera do t work for me. The CM 10 and 10.1 ROMs and KatKiss 4.2.2 it worked fine. I have not tried any CM 10.2 ROMs.
frederuco said:
On KatKiss 4.3 the camera do t work for me. The CM 10 and 10.1 ROMs and KatKiss 4.2.2 it worked fine. I have not tried any CM 10.2 ROMs.
Click to expand...
Click to collapse
Have you tried the stable version recommended on the CM site? Its 9.1.
The 10.x versions are not marked as stable... and i really dont want to re-re-reflash over and over again
Thks
Sent from my Transformer TF101
Exnor said:
Have you tried the stable version recommended on the CM site? Its 9.1.
The 10.x versions are not marked as stable... and i really dont want to re-re-reflash over and over again
Thks
Sent from my Transformer TF101
Click to expand...
Click to collapse
Hmmm, if I did it was a while ago. CM 9 is based on ICS. I have not run an ICS ROM for more than a few hours in over a year. I would say that the Jelly Bean based ROMs (CM10.X) feel SO much faster due to project butter. I flashed back to stock ICS a bit ago, and it feels so sluggish.
Most of the threads on CM 10 you can see how stable they are. I know the No-Name CM 10.1 is rock solid. Joesteink has moved on, but the ROM is still rock solid and many users swear by it.
frederuco said:
Hmmm, if I did it was a while ago. CM 9 is based on ICS. I have not run an ICS ROM for more than a few hours in over a year. I would say that the Jelly Bean based ROMs (CM10.X) feel SO much faster due to project butter. I flashed back to stock ICS a bit ago, and it feels so sluggish.
Most of the threads on CM 10 you can see how stable they are. I know the No-Name CM 10.1 is rock solid. Joesteink has moved on, but the ROM is still rock solid and many users swear by it.
Click to expand...
Click to collapse
I cant find the links for that version... only the linaro versions...
Sent from my Transformer TF101
Here is the link to the downloads: http://nexfiles.kjonigsen.net/tf101/cm10.2/
And the thread: http://forum.xda-developers.com/showthread.php?t=2402752
frederuco said:
Here is the link to the downloads: http://nexfiles.kjonigsen.net/tf101/cm10.2/
And the thread: http://forum.xda-developers.com/showthread.php?t=2402752
Click to expand...
Click to collapse
Thanks mate... i'm gonna give it a try and post my results here in case is useful for other people.
Exnor said:
Thanks mate... i'm gonna give it a try and post my results here in case is useful for other people.
Click to expand...
Click to collapse
Is CM finally stable? I had it installed a year or so ago, but then it was still beta for the transformer. Since then I used various flavors and eventually stayed with the EOS-build. Very stable with all the options I ever need (like overclocking and gouvenor-changing). I'm still using EOS, since it's stable and performing very well. Katkiss seems to be the continuation of it, so you could try it yourself And if you don't like it, then you drop it for something else
Hello guys, I need some help! My GT-P3113 which is running stock 4.1.1 rooted, has a problem with WiFi. I checked the modem, network settings but nothing happened. So I wiped data and cache with C.W.M. I booted up succesfully on 4.1.1 (from the beginning), and I followed the usual process:
Choose your country - date and time - add Samsung account (I skipped it) - add Gmail account (ERROR,ERROR,ERROR).
So I thought that I have to flash a custom ROM in order to get my tablet fixed.(not to mention that custom ROMS are better than stocks). I thought of CM 10.2 but I noticed that for GT-P31XX devices, everyone is flashing a nightly and not a stable release of 10.2 . And I would like to ask you, what would happened if I flashed the CyanogenMod 10.2 stable. If it's not bad, can someone tell me how to install it?
A huge thanks to everyone
dimsar2013 said:
Hello guys, I need some help! My GT-P3113 which is running stock 4.1.1 rooted, has a problem with WiFi. I checked the modem, network settings but nothing happened. So I wiped data and cache with C.W.M. I booted up succesfully on 4.1.1 (from the beginning), and I followed the usual process:
Choose your country - date and time - add Samsung account (I skipped it) - add Gmail account (ERROR,ERROR,ERROR).
So I thought that I have to flash a custom ROM in order to get my tablet fixed.(not to mention that custom ROMS are better than stocks). I thought of CM 10.2 but I noticed that for GT-P31XX devices, everyone is flashing a nightly and not a stable release of 10.2 . And I would like to ask you, what would happened if I flashed the CyanogenMod 10.2 stable. If it's not bad, can someone tell me how to install it?
A huge thanks to everyone
Click to expand...
Click to collapse
Stable that's mean it can be use for daily use and have less bugs, maybe there's no bugs
but , i'm not sure if cm10.2 is exist, you can check it on cyanogenmod sites
for instal it, you have to rooted your phone and have installed cwm recovery for instal the rom
CM10.2 Stable not exist for Galaxy Tab 2 at the moment, but the nightlys are much stable.
Maybe take a look on SlimBean 4.3.1 Stable 2.2 - i love it
Single-Step to get a Custom-Recovery and Root: http://forum.xda-developers.com/showthread.php?t=2510669
@dimsar2013
Don't worry about "stable", it is just a label. CM10.2 nightly builds for Tab 2 are already very stable, I use one from October 17th and it is bug-free.
Slimbean 4.3 Stable 2.2 is awesome!!! The device runs very smoothly and the battery life is so big!!!!! It is an amazing ROM. Way more better than the Stock TouchWiz themed ROM.
Sent from my GT-P3110 using XDA Premium 4 mobile app
SlimBean thread closed http://forum.xda-developers.com/showthread.php?t=2430783
so in the past week or so ive seen someone take my ROM, create a thread and released as his own. today i see another cat kang the $hit out of my device trees, and claim "me only" in credits, da fuq?
that was the straw that broke the Tab 2's back, for me anyway
Click to expand...
Click to collapse
As topic says
I am a Tab2 user but i got this yesterday and i really need the JB 4.3 .
I just hate Samsung stock bloat rom. Is there any custom alternative to my Note GT-N8010?
Also is there any way to root this device?
I think i found a guide but i ask the professionals here instead of guessing
Thanks guys/Girls!
There are plenty of roms and ways to be rooted, you should check the whole android dev. Forum before oppening a new topic asking for something that is already there...
Well is i said im not sure what i can use or not. I do not want to damage my tablet and therefor i ask the guys who knows what rom i can use with my GT-N8010 32GB
Most of the roms i have been looking at doesn't say if it is for my device or the other 8xxx devices. I have root but i want a new fast rom (4.3-4.4) with working s-pen and IR
i ask because i do not want to make a mistake :/ Also looking for a good Kernel!
I am looking for
*Rom thats fast with no bloat (4.3/4.4) working with GT-N8010 32GB
*A nice Kernel with over clock possibility working with GT-N8010 32GB
BadWolff23 said:
There are plenty of roms and ways to be rooted, you should check the whole android dev. Forum before oppening a new topic asking for something that is already there...
Click to expand...
Click to collapse
Well, I have a n8010 too, and we dont have a 4.4 rom yet, I tried Omnirom but wasnt able to install it. 4.3.1 rom is the CyanogenMod 10.2 , you can check official CM page and look for the n8013 model it should work just fine and it comes preloaded with a good kernel, but the rom is so fast fhat you wont need any OC, after thst you got Android Revolution HD and Hyperdrive, I am currently on hyperdrive (4.2.1) and sweet lord is FAST it comes with bloat only if Uwant it and all the spen funcionalities, Oh yeah..also CM10.2 doesnt come with all the spen funcionalities but the pressure sensitivity is the same.. (but you dont have snote and the realtime cropping option etc, those come with touchwiz.... My re omendation?.. Hyperdrive. Next one would be CM10.2 both are really awesome (for me) but one is AOSP and the other is touchwiz
Thank you very much! Will take a look at CM10.2 as i didnt get the Wifi working on Hyper.....
BadWolff23 said:
Well, I have a n8010 too, and we dont have a 4.4 rom yet, I tried Omnirom but wasnt able to install it. 4.3.1 rom is the CyanogenMod 10.2 , you can check official CM page and look for the n8013 model it should work just fine and it comes preloaded with a good kernel, but the rom is so fast fhat you wont need any OC, after thst you got Android Revolution HD and Hyperdrive, I am currently on hyperdrive (4.2.1) and sweet lord is FAST it comes with bloat only if Uwant it and all the spen funcionalities, Oh yeah..also CM10.2 doesnt come with all the spen funcionalities but the pressure sensitivity is the same.. (but you dont have snote and the realtime cropping option etc, those come with touchwiz.... My re omendation?.. Hyperdrive. Next one would be CM10.2 both are really awesome (for me) but one is AOSP and the other is touchwiz
Click to expand...
Click to collapse
For making wi fi work on hyperdrive you must change the wifi channel of your router, I have it on automatic and its great
OK thanks! but i wanted to lock the channel as all here is using almost the same channel which i didn't like I wanted my own channel weiii
BadWolff23 said:
For making wi fi work on hyperdrive you must change the wifi channel of your router, I have it on automatic and its great
Click to expand...
Click to collapse
Concerning hyperdrive i had the same problem some time ago. maybe try one of the solutions here. http://forum.xda-developers.com/showthread.php?t=2296669
They did work back then, but i don't know if they still do.
For me (almost) all roms for the n8013 were/are working fine on the n8010.
If you have problems, try to flash latest version of Philz recovery(http://forum.xda-developers.com/showthread.php?t=2202714) for 8013 !!! with odin.
for rooting methods 2 and 3 should do from here http://forum.xda-developers.com/showthread.php?t=2080366.
an odin alternative http://www.xda-developers.com/android/meet-jodin3-a-web-tool-that-flashes-your-samsung-device/
4.3 rom -> maybe http://forum.xda-developers.com/showthread.php?t=2151873
4.4 -> omni
I'm loving omnibus on my 8010. I had to install the 8013 recovery to get it working but official omnirom builds are imminent and should support the 8010 directly.
The rom is fast, sleek, no real issues I can see, excellent power usage. Loving it
Sent from my GT-N8013 using Tapatalk
go with [4.4.2] OmniROM instead...
Although I did try Hyperdrive, I wasn't too impressed & Pacman was better, as I have been on 4.1.2 since day one & finally made the switch. I skipped over 4.2/4.3 & decided to go with the [[UNOFFICIAL Kit-Kat]] omniROM 4.4.2 on mine for the meantime. I am very much impressed, only issue I have found so far, is the 'Swype' feature isn't working, but other than that, its stellar thus far. I would highly recommend this rom for your tablet, until something 'new comes along... Maybe a Jedi X-Master ROM for our Note10.1's!!!
OmniROM 4.4 Does work for Galaxy Note 801x
One catch about OmniROM, it doesn't have a root built-in, so don't forget to root your device after you install the new ROM.
So to install, make sure you have CWM 6.0.4.4 (aka Philz Touch) or TWRP 2.6.3.1 as your recovery, and then go from there. The newest Roms are located on the OmniROM website now, and N801x is included. Get the gapps for Android 4.4, install after you install the ROM. Install the root after all that.
It's easy to install, and easy to use. I have been using Omni for about a month now, and it runs great. I just wish Samsung would've had enough sense to update all their models with this version of Android.
Does this work with n8013?
Sent from my GT-N8013 using Tapatalk
Guntert said:
Does this work with n8013?
Sent from my GT-N8013 using Tapatalk
Click to expand...
Click to collapse
Yes, in fact I am running the most recent version of Kitkat 4.4.3 on my N8013 right now, and it runs very smoothly
Sent from my GT-N8013 using XDA Premium HD app
icestreaker said:
Yes, in fact I am running the most recent version of Kitkat 4.4.3 on my N8013 right now, and it runs very smoothly
Sent from my GT-N8013 using XDA Premium HD app
Click to expand...
Click to collapse
where can I find the latest and what did u use to install it?
Sent from my GT-N8013 using Tapatalk
Guntert said:
where can I find the latest and what did u use to install it?
Sent from my GT-N8013 using Tapatalk
Click to expand...
Click to collapse
First install a custom recovery, the one I have found to work best is Philz Touch. You can do a search and find the link for it here in XDA. It's good because as I have noted before, OmniROM does not come rooted. Philz Touch has to be the easiest recovery I have ever used to install root, and you may want to do it several times because there are nightlies for the ROM.
As for the ROM, go to dl.omnirom.org and go to the folder for 'n801x'
Once you get the zip file downloaded, copy it to your SD card, install the recovery, and then install the ROM
Oh, don't forget, make sure you also get gapps for Android 4.4 on your SD card before doing this. Pointless to have a ROM with no gapps install.
Let me know if you have any problems.
Good luck
Sent from my GT-N8013 using XDA Premium HD app
Q&A for [ROM][4.4.4][OFFICIAL] CM-11.0 for tf300t
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4][OFFICIAL] CM-11.0 for tf300t. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
T300T CM11.0 nightlies?
Is it just me, or are all of the CM11 nightlies gone?
Some of the CM12 nightlies as well. Are there any mirrors?
Anyone have any CM11 roms where the Cast Screen function actually works?
shdware said:
Is it just me, or are all of the CM11 nightlies gone?
Click to expand...
Click to collapse
you're not alone, as posted in another thread i cant find cm11 nightly for tf300t anymore everywhere!
i need to downgrade to cm11 from a dirty install of one of the last cm12 nightly but i wonder how can i if official cyano repo doesnt work...
so, if anybody can put somewhere the cm-11-20150105-NIGHTLY-tf300t.zip i really appreciate it!
CM11.0 4.4.4 dead?
It looks like all of the nightlies are gone.
I'm looking for a KitKat rom that allows:
- overclocking
- a working 'cast screen' function
- stability!
Are there any? It doesn't look like Lollipop is ready yet for a daily driver.
shdware said:
It looks like all of the nightlies are gone.
I'm looking for a KitKat rom that allows:
- overclocking
- a working 'cast screen' function
- stability!
Are there any? It doesn't look like Lollipop is ready yet for a daily driver.
Click to expand...
Click to collapse
Overclocking is generally a kernel feature; try grimlock, geass, katkernel, or _that kernels with any KK ROM for overclocking. I was running a KK PacROM which was quite stable prior to switching to LP. Try KatKiss for a great LP ROM. I don't use cast screen so I can't help with that.
shawnbrennan55 said:
Overclocking is generally a kernel feature; try grimlock, geass, katkernel, or _that kernels with any KK ROM for overclocking. I was running a KK PacROM which was quite stable prior to switching to LP. Try KatKiss for a great LP ROM. I don't use cast screen so I can't help with that.
Click to expand...
Click to collapse
I'm still fairly new to this and wasn't aware that you could install a ROM with a different kernel; I'm used to just flashing and taking whatever is in the package.
Is there a more comprehensive guide on how to do this exactly? I'm enjoying the speed boost from the Zombi ROM which uses Grimlock's kernel, but when the docking station is plugged in the touchscreen is all over the place, so this isn't going to work for me.
OMNIrom seems to be updated fairly regularly and the docking station did pretty well, but I was locked into a stock speed.
shdware said:
I'm still fairly new to this and wasn't aware that you could install a ROM with a different kernel; I'm used to just flashing and taking whatever is in the package.
Is there a more comprehensive guide on how to do this exactly? I'm enjoying the speed boost from the Zombi ROM which uses Grimlock's kernel, but when the docking station is plugged in the touchscreen is all over the place, so this isn't going to work for me.
OMNIrom seems to be updated fairly regularly and the docking station did pretty well, but I was locked into a stock speed.
Click to expand...
Click to collapse
Just flash the kernel zip file from recovery, wipe cache/dalvik, then reboot. On LP you can skip the wipe cache/dalvic step.
Stable version?
Does anybody know when a stable version of CM 11 will be published? I'm still on CM 10 and a bit cautious with upgrading the tablet.
ViseMoD said:
Does anybody know when a stable version of CM 11 will be published? I'm still on CM 10 and a bit cautious with upgrading the tablet.
Click to expand...
Click to collapse
Forget CM11. KatKiss 5.1 is beautiful. I've got it running on my TF300T and a TF700 with a custom kernel.
It's faster than CM11. Try it - you won't regret it.
Google Play Store and me301t with Cyanogen 11
Hello,
i have installed UNOFFICIAL][4.4.4] Cyanogenmod 11.0. I have no playstore. In this thread there is a link but all answer are deleted. When can i find this file for my me 301t?
Thanks you!!
falcoman33 said:
Hello,
i have installed UNOFFICIAL][4.4.4] Cyanogenmod 11.0. I have no playstore. In this thread there is a link but all answer are deleted. When can i find this file for my me 301t?
Thanks you!!
Click to expand...
Click to collapse
CyanogenMod never comes with Play or other Google apps. Flash a GAPPS package of your preference.
Sent from Google Nexus 4 @ CM12.1
[WARNING: XDA Premium 4.0.13+ lacks Signature function - do not update]
official and unofficial cm 11, that is the question?
excuse me again.... i have installed unofficial cm 11.0. What is the difference between official and unofficial.
do you think it would be better if i install official?
thanks you
curently i have 11-20141024-unofficial-me301t
is it the best version in cm11?
.
AndyYan said:
CyanogenMod never comes with Play or other Google apps. Flash a GAPPS package of your preference.
Sent from Google Nexus 4 @ CM12.1
[WARNING: XDA Premium 4.0.13+ lacks Signature function - do not update]
Click to expand...
Click to collapse
falcoman33 said:
excuse me again.... i have installed unofficial cm 11.0. What is the difference between official and unofficial.
do you think it would be better if i install official?
thanks you
curently i have 11-20141024-unofficial-me301t
is it the best version in cm11?
.
Click to expand...
Click to collapse
There's no official version for ME301T, so keep what you have, unless you find a version that's more up-to-date. The latest CM11 I can find for TF300T is 20150112.
Sent from Google Nexus 4 @ CM12.1
[WARNING: XDA Premium 4.0.13+ lacks Signature function - do not update]