Hello,
I´m using wwmod rom on O3D p920h (Brazil here) and think it´s great. Problem is: I now wanna get the cyanogen nightly built which is fantasticly fast except it can´t get the phone connected. I know i gotta go for the GB Baseband first but i just can´t seem to get it right. I´m able to try other rooms but not get the GB Baseband.
Also i didn´t do a backup of my phone so I don´t have even the Froyo Baseband which came with the phone. So i´m unable to run the official update tools from LG also.
Could anyone please help me with a Nanroid Backup (clockworkmod backup) with the GB baseband???
I really tried to follow instructions on various links but seems my 64bit system won´t do it for me.
Thanks a lot!
You can install CM for thrill. Working on froyo baseband.
Hello,
can i install this rom on my optimus 3d
ICS 4.0.4 Custom Full 3D ROM
os 2.2.2
baseband l6260_modem_sic_01,1042
kernel 2,6,35,7
broj vrzije frg83g
ver softvera lg920-v10d-jul-08-2011
so far I've already installed the Acura Team 3D, LiquidBeats V3.0, KING_3D_ROM and on any i dont hawe network : (
I did successfully return to the old version
but my mob working bad , and I therefore like to change to ICS 4 rom
but I fear that it will again be without success, and I'll just lose time with no success
so I would like to say that if anyone can make this or any other rom instead factory rom
Not to forget that I bought phone in the operator store Telenor Serbia
p.s.
Sorry for bad English
Today I tried to install .. and installation and start at about 15% said that everything is ok successfully installed and reset the mob stuck on lg logo
what to do please help
Try this:
http://forum.xda-developers.com/showthread.php?t=1244490
not so in general .. I went through zipa on the SD card ..
I hold power and volume, and when I go to open the instal rom from sd
sombadi help plz
It's the same problem as mine . But me 27 % stuck in it .
I tried smart flsher and it worked . I do not how did it do it . but it worked . And now my phone ICS
Sent from my LG-SU760 using xda app-developers app
Zlocesti said:
Hello,
can i install this rom on my optimus 3d
ICS 4.0.4 Custom Full 3D ROM
os 2.2.2
baseband l6260_modem_sic_01,1042
kernel 2,6,35,7
broj vrzije frg83g
ver softvera lg920-v10d-jul-08-2011
so far I've already installed the Acura Team 3D, LiquidBeats V3.0, KING_3D_ROM and on any i dont hawe network : (
I did successfully return to the old version
but my mob working bad , and I therefore like to change to ICS 4 rom
but I fear that it will again be without success, and I'll just lose time with no success
so I would like to say that if anyone can make this or any other rom instead factory rom
Not to forget that I bought phone in the operator store Telenor Serbia
p.s.
Sorry for bad English
Click to expand...
Click to collapse
first of all you have to change the BASEBAND and the ROM.
FLASHING ZIP ROM with CWM will NOT change your ROM from version to version (2.2 ->2.3 -> 4.0) !!!!
Once you install OVER THE COMPUTER your ROM (in KDZ or FLS+BIN) then you can play with custom roms.
so if you did this before install Acura ICS rom then proibabvly you lost you IMEI.
this check when you write on your dial pad *#06#
if it is empty - you should restore it - check the developer section how to do that.
I'm just so lost imei. Then I did a restore and everything was like when I bought the mob. Then am via CWM intall king rom and everything worked but I not have network. so I did restore again and now my phone is terribly slow. I'd like to install ics rom .. so if you could explain to me in detail how to make a switch or a link where what to do. as the phone was bought in the mobail operator and is SIM lock
Zlocesti said:
I'm just so lost imei. Then I did a restore and everything was like when I bought the mob. Then am via CWM intall king rom and everything worked but I not have network. so I did restore again and now my phone is terribly slow. I'd like to install ics rom .. so if you could explain to me in detail how to make a switch or a link where what to do. as the phone was bought in the mobail operator and is SIM lock
Click to expand...
Click to collapse
If you want to install gingerbrad ROM's you must update your phone to gingerbread, you can do this with official LG program or with kdz installer http://forum.xda-developers.com/showthread.php?t=1287236 and then install rom.Or if you want to install xbsall ICS port go http://forum.xda-developers.com/showthread.php?t=1956347.
Gutted Mate!!
But you Cannot UPGRADE from GingerBread ( Thats what you Had on phone originally ) To ICS through your phone using Clockwork Mod
your phone will try, but you will just end up confusing it like you have done,
http://forum.xda-developers.com/showthread.php?t=1956347
follow this thread and read every post from Page 1, then read all post in links to other helpfull threads like this one
http://forum.xda-developers.com/showthread.php?t=1244490
i found this helped
http://forum.xda-developers.com/showthread.php?t=1942836
but tbh i cant really stress enough,, that you need to read read read lol,, and if still not sure read some more :good:
Good Luck buddy
I wanna try update my phone (p940) to ics 4.0.4
All of step past success but i hang up in last step (UpTestEX_mod2_marwin.exe).
I can chose 3gqct and emergency and .kdz file but its crash when click the uprage start.
I attached picture.
Anybody help me ?
I tried every way like lgflashtool, smart flash tool ... besides broke down career. I cant get any signal , no mather what i do .
now i use 2.3.7 and i cant change anything
Up I need help
on what os did you done procedure? xp,vista,7,8? when l had prada,my issue was random shut down - on ICS, l have tried to normal use ICS and phone shuts down time to time, eventually l have decided to return to 2.3.7 and all worked perfectly...
try to use downgrade and upgrade methods...
i need 2.3.7 .kdz file for downgrade anyone upload that?
all of lg fw sites dead.
do you have find GB rom for your prada? http://www.mediafire.com/?hl26jln8ingiz
I had this new Optimus 3D (P925). I flashed it with CM7 but had network problems with it. With a help on the forum I was able to flash a new rom using the omap4boot, smartflash, and OS hacking utility. The kdz file had a v21e baseband. I was able to get back on gingerbread but the phone became P920. I reflashed the CM7 because I thought with the v21e baseband I could get the network working. I had the same problem again. I flashed the phone again but this time with a different baseband( LGP940_V20D). I still had this problem on it and I tried to flash the v21e baseband among others but the V20D baseband doesn't erase. Please I need your help. I am in Ghana
I have flashed new rom on my Optimus 3D with the OS Hacking Tool but I am stuck on this baseband and can't return to v21e. I tried flashing with cm7 in zip using cwm but it doesn't work too. Please I think something is now turned on read only. I need your help soon