Related
anyone here who can help me with installing Android SDK/ADB/usb driver/whatever it is? well im just copying this guide
androidcentral.com/sdk-driver-root-oh-my (cant put links)
but i keep failing at this part
Select "Browse my computer for driver software."
Now browse to the SDK folder, and point Windows to the folder named usb_driver. Click the image below to enlarge it and see the usb_driver folder inside your Android SDK.
Click to expand...
Click to collapse
when i click next it stops and then this shows up
gyazo.com/e2e6f992cb594b750a5359ecbe161184.png
i wasted 4 hours on this already and i feel really stupid
would appreciate it very much if someone could help.
by the way i reinstalled it, then tried to do it using this guide adrynalyne.us/files/How%20to%20install%20adb.pdf
all was going good until i tried to plug my phone while the USB Debugging is turned on, it won't even show the option of "Locate and install driver software."
i tried to check device manager but i cant find adb in there to load it or something. oh and i found many new i haven't seen before, like Android USB Device, Android phone, etc.
someone on another forum suggested that i download htc sync 3.0 too, so i did, but i dont really have any idea how to use it
sorry if i seem stupid, just really really new to this, got an android phone for xmas as a gift
Search for phone drivers on the manufacturers website and of you are on 64 bit, get 32 and 64 bit drivers
Sent from my Epic that craves frozen yogurt
Trying to root my moms new nook (her request) and was rolling along until I hit the nook zergy screen (in red) and it won't read the device to root. I'm basically at step 5/5 just can't see what im missing. I've exhausted Google on this and can't seem to find an answer. I'm noobish to this so from prior experience do I need sdk tools for windows?
Everything is installed (drivers etc) NO SD CARD INSTALLED (make a difference?)
Admins plz move if I posted in wrong area. First post and was directed to general q&a for this questioned instead of the forum I pulled the root info from. Thanks
Anybody.....anybody?
I had the exact same problem. Zergy asked if I saw the nook and I typed "n" and pressed enter and it said something about lieing and I couldnt proceed. Now the computer doesnt recognize the tablet at an android device in device manager. (I unplugged it and tried to do the process over again...)
I am also facing same problem. Tried in Six deferent pc with no luck.
I am using the device out side USA.
Please help indirect .......... We are in no way
Here you go guys. It worked for me. I also had to uninstall the composite devices in the same subcategory...
http://forum.xda-developers.com/showthread.php?t=1363652
I originally posted this inside the Glorious Overdose V2 thread, but decided to post here as well.
For some reason my computer won't recognize my Sidekick when I plug it in via usb. I do have the samsung drivers installed and it will read my friends Samsung Droid Charge just fine, but when I plug my Sidekick in it comes up saying "USB Device Not Recognized". So far I've tried uninstalling and reinstalling the drivers from the device manager to no avail. Wondering if anyone has an idea as to what it could be. I've also tried googling the solution and everyone says to just uninstall and reinstall the drivers and it should work. Now the phone is not plugged into a USB Hub, extender, or case, it is plugged directly into a usb port on the mother board.
PC Specs just in case:
Motherboard - Gigabyte GA-970A-D3
OS - Windows 7 Ultimate x64
CPU - AMD FX-4100
Memory - 8GB DDR3 1066
Phone:
T-Mobile Sidekick 4G running Glorious Overdose V2
Nothing added just the rom and some apps/games.
I have tried with USB Debugging on and off, either way does not work.
Update: I have since tried Kies mini, as well as the drivers found on Softpedia. Neither of those worked, so I just got done reformatting and reinstalling Windows hoping that would work. At first it did not, right now I am running windows update to see if that was the issue, I'll update of what the outcome is.
Update: After installing all available Windows updates it's still not recognizing the phone. Now no matter what it's saying it's an Unknown Device. Even after I try and do a manual driver update and tell it to look in the folder with the driver files from Softpedia. I'm at a complete loss now.
If anyone has any idea's please let me know.
What mode do you have the phone in? Settings->Applications->USB Settings. It should be in Mass Storage if you want to access its SD Card.
Maybe put another rom on the sd card and flash something else, I don't think it would be a rom issue but it would be worth a try?
Sent from my SGH-T839 using XDA
Jax184 said:
What mode do you have the phone in? Settings->Applications->USB Settings. It should be in Mass Storage if you want to access its SD Card.
Click to expand...
Click to collapse
It's set to USB Debugging. But even then, it should read as something else other then Unknown Device when I plug it in. I have tried plugging it in and selecting Mass Storage, still comes up as Unknown Device.
HewettBR said:
Maybe put another rom on the sd card and flash something else, I don't think it would be a rom issue but it would be worth a try?
Sent from my SGH-T839 using XDA
Click to expand...
Click to collapse
I've thought about that, and from everything I can see it's either the ROM or the drivers. So we'll see...I'll probably try a different ROM and see what happens.
I suggest turning USB debugging off and mass storage on, for how you'll be using it. And recall that you have to change this stuff with the USB cable unplugged.
I've tried that, and after talking with the T2 Technical Support from Samsung for 45min today, the only option left is to send the phone in to get worked on. Though, I'm going into the T-Mobile store and see if they can't replace the phone or give me a loner while this one is out getting repaired.
More info request.
Can you provide us with the names and links to the drivers you have tried?
DuctTapedGoat said:
Can you provide us with the names and links to the drivers you have tried?
Click to expand...
Click to collapse
Kies Mini - http://www.samsung.com/us/support/owners/product/SGH-T839HABTMB
Softpedia - http://drivers.softpedia.com/get/MOBILES/Samsung/SAMSUNG-USB-Driver-1480.shtml
As well as the Samsung Vibrant drivers from both of those sites.
Samsung SideKick 4G Drivers
www DOT filedropper DOT com FWSLASH sk4gx64drivers
This is the exact drivers I pulled off of my own machine, I ran into massive issues with those same driver packages, especially in getting the initial root to take with a few different utilities designed to grant sudo/su/root access, and these are the drivers I have running currently, just pulled off my own machine. I run Windows 7 x64, but as well, there should be no reason why these drivers wouldn't work on a x86 machine and/or OS.
NOTE : I apologize it's not a proper link, but I'm unable to post a raw link until I hit my 8th post. I will come back and fix this after I hit that 8th post, but until then it will be ghetto-bypass HTML.
DuctTapedGoat said:
www DOT filedropper DOT com FWSLASH sk4gx64drivers
This is the exact drivers I pulled off of my own machine, I ran into massive issues with those same driver packages, especially in getting the initial root to take with a few different utilities designed to grant sudo/su/root access, and these are the drivers I have running currently, just pulled off my own machine. I run Windows 7 x64, but as well, there should be no reason why these drivers wouldn't work on a x86 machine and/or OS.
NOTE : I apologize it's not a proper link, but I'm unable to post a raw link until I hit my 8th post. I will come back and fix this after I hit that 8th post, but until then it will be ghetto-bypass HTML.
Click to expand...
Click to collapse
Thank you, I tried unpacking them to a folder on C:\ went into Device Manager, right clicked on the Unknown Device, Update Driver Software..., Browse My Computer for Driver Software, Set the search to C:\, and still saying Unknown Device is the best driver software for it. No idea why it's doing this.
Proper Driver Update
What is going on is that Windows is seeing a more recent signature file attached to the SK4G drivers on your computer (I don't believe anything at all is wrong with your device) than the working ones there.
First, in Add/Remove Programs, uninstall the Samsung Kies and Samsung Driver pack you installed earlier. Now...
Go into on your PC:
://windows/system32
And locate the same file names, cut them all, and paste them in a temporary folder you create, preferably on the desktop or something similar. You may not find every file, and that's okay, just the ones you can find. Next, you will be wanting to paste the driver files from the package I uploaded. Now, turn off Automatic Updates, so it doesn't automatically install drivers upon connection. Reboot the computer, double check and make sure Automatic Upates are off when you log back on. Now, connect the device and see if it gives you the same results. By removing the old drivers which don't work, you'll be able to force it to the ones we know work, and you /should/ have success. As well - USB data debugging active and activating connection for data transfer via the notification pulldown menu would be the best way to do this initially.
Would I be looking in c:\windows\system32\drivers for the same file names as the ones you packed up?
Ok, so the only one I could find in the drivers folder was modem.sys. But it will not let me move/replace the one that's already in there. It's telling me access is denied, same thing when I try and set the permissions it will not let me. I am logged in as an Administrator, as well it says it when I log in as THE Administrator account. So yeah...
Cool - modem.sys is a stock one that is shared with the device, so that's fine.
With the other two programs uninstalled, the old drivers uninstalled, and forcing it into those by pasting them into //win/sys32/drivers you should be in business. Hmm. You can try UnlockRoot.com's device rooter - I know they have an auto driver detector in their program. As well, you can try SuperOneClick, but I don't remember if they do or no. What about going in from the Recovery menu and toggling USB? Anything wierd going on in the /mounts? What about ADB shell access from the Android SDK on Windows?
DuctTapedGoat said:
Cool - modem.sys is a stock one that is shared with the device, so that's fine.
With the other two programs uninstalled, the old drivers uninstalled, and forcing it into those by pasting them into //win/sys32/drivers you should be in business. Hmm. You can try UnlockRoot.com's device rooter - I know they have an auto driver detector in their program. As well, you can try SuperOneClick, but I don't remember if they do or no. What about going in from the Recovery menu and toggling USB? Anything wierd going on in the /mounts? What about ADB shell access from the Android SDK on Windows?
Click to expand...
Click to collapse
I tried plugging the phone in, still showing up as Unknown Device. Tried UnlockRoot.com's program, no change. Installing the Android SDK right now, as well as I tried deleting the INFCACHE.1 file, and no change with that either. Once I'm done installing the Android SDK I'll redelete the INFCACHE.1 file and restart and try the phone again.
I did go in and check the mounts in recovery and they were set to:
UNMOUNT CACHE
MOUNT DATA
UNMOUNT SDCARD
UNMOUNT SYSTEM
Thank you for your help so far.
UPDATE: So after installing the Android SDK, deleting the INFCACHE.1 file, restarting, and then plugging the phone in, comes up and says the USB Device is Not Recognized. Then goes to search the preconfigured driver folders, and fails to install the driver for Unknown Device. And ADB Devices shows no devices as well(didn't think it would, but yeah).
UPDATE: So after using my friends phone as a conduit to throw the Stock Odexed KJ2 w/ Root(http://forum.xda-developers.com/showthread.php?t=1328698) onto my SDCard and flashing that the phone seemed to go into a soft brick at pre-boot screen(where it says SAMSUNG T-Mobile blah blah blah). Mind you this would freeze before it was even able to get into recovery. So I took it into T-Mobile and they are doing a manufacturer warranty replacement. So hopefully this next phone will be able to connect to the computer and be read correctly.
EDIT: Got this figured out...
Hi,
Yes I have searched, but it seems the Imagine 7 is both new enough, and not mainstream enough to have much info.
So I would like to get some input/thoughts from others. Yes, I'm a 'noob' here, but I am extremely grateful to any insight large or small anyone here is willing to provide. So, that said, thanks in advance!
I'm attempting to root a Skytex Imagine 7 tablet using Bin4ry's tool. However, I cannot seem to have it be recognized. The usb portion of the device is recognized as a rockchip_usb... this is fine. However, to root I also need the ADB driver. The device shows up as IMAGINE under devices, but Windows is unable to find a driver. After going to the Skytex website, I downloaded their driver for the Imagine 7. However, this driver is actually just the Nexus 7 driver, at least from what I can gather reading through the inf. Either way, windows will not find it even after telling it to install from the folder, so instead you must click 'have disk' and manually install the inf. Once installed, it will show up as Android Phone>ADB Driver (or similar).
Unfortunately this is where I am stuck, even with the driver installed, Bin4ry's script hangs at looking for device. So what can I modify to create recognition? Or have I done something stupid... which is entirely possible...
Thanks again!
I need help figuring out how to root a RCA RCT6077W22 tablet. It has Android Jellybean 4.1.1- v1.0.1, 8GB built in storage, 1GHZ processor, Google apps installed, kernel is [email protected]#132.I'd like to try to root it from the tablet itself if not I'm familiar with SuperOneClick as I've used it for my Samsung Galaxy S 4G before I should it. If it comes to that option I need to be able to use a rooting program on my computer that does not require internet the only internet I am able to use is the libraries. I have a laptop but no charger so my laptop is dead. I'm not a noon when it comes to rooting as I've mentioned I've done it before. Just need help finding a root for this tablet. I appreciate any help I get and thank you. If you need more info feel free to ask. I've also looked at the topic about the 4GB but its not that helpful is why I created my own topic.
deathscreations said:
I need help figuring out how to root a RCA RCT6077W22 tablet. It has Android Jellybean 4.1.1- v1.0.1, 8GB built in storage, 1GHZ processor, Google apps installed, kernel is [email protected]#132.I'd like to try to root it from the tablet itself if not I'm familiar with SuperOneClick as I've used it for my Samsung Galaxy S 4G before I should it. If it comes to that option I need to be able to use a rooting program on my computer that does not require internet the only internet I am able to use is the libraries. I have a laptop but no charger so my laptop is dead. I'm not a noon when it comes to rooting as I've mentioned I've done it before. Just need help finding a root for this tablet. I appreciate any help I get and thank you. If you need more info feel free to ask. I've also looked at the topic about the 4GB but its not that helpful is why I created my own topic.
Click to expand...
Click to collapse
Did u figure out how to root your rca tablet....I have one and I need mine rooted also I can't store any apps on my ad card
Can you give more specifics such as the the model number, what version of android is it running?
Sent from my Nexus 5 using xda app-developers app
I have the rct6378w2 RCA 7' 8GB tablet (4.2.2 JB). (Black Friday 2013 Walmart for $49)
I was able to root it by first installing the pdanet drivers (for adb access). And then using the kingo app, which you can get from http://www.kingoapp.com/.
Its free but closed source. I found it via this youtube video. https://www.youtube.com/watch?v=8MiZtZCqu4k
Worked even with the 1.0.2 update installed (which I have no clue what it did (17MB).
Takenover83 said:
I have the rct6378w2 RCA 7' 8GB tablet (4.2.2 JB). (Black Friday 2013 Walmart for $49)
I was able to root it by first installing the pdanet drivers (for adb access). And then using the kingo app, which you can get from http://www.kingoapp.com/.
Its free but closed source. I found it via this youtube video. https://www.youtube.com/watch?v=8MiZtZCqu4k
Worked even with the 1.0.2 update installed (which I have no clue what it did (17MB).
Click to expand...
Click to collapse
TAHNK YOU Takenover83 you are amazing. I rooted my tablet same model and set up as yours.
frarredo here is the information you were asking about in the picks below..
Please take notice to picture Screenshot_2013-11-29-23-15-32.png running bubble launcher, xposed framework , and xhalofloaingwind, to muliwindows on the tablet and all android phones,
Sorry here is the last pic it did not let me upload
Help
Takenover83 said:
I have the rct6378w2 RCA 7' 8GB tablet (4.2.2 JB). (Black Friday 2013 Walmart for $49)
l]
Worked even with the 1.0.2 update installed (which I have no clue what it did (17MB).
Click to expand...
Click to collapse
I cannot get pdanet to get the drivers. I cant find any drivers anywhere. Pdanet says to click ok after connecting, and it just says no android device found..I think there's an error box too.. I don't know how to fix it. I also have the tablet from the black friday event. Exact same one. Also, I have USB debugging on...
UPDATE: I found out the problem! The support files weren't in the root file I had the .exe in. I just moved the .exe to the same folder with the support files, and now I'm rooted and ready! Thanks!
wy3r5 said:
I cannot get pdanet to get the drivers. I cant find any drivers anywhere. Pdanet says to click ok after connecting, and it just says no android device found..I think there's an error box too.. I don't know how to fix it. I also have the tablet from the black friday event. Exact same one. Also, I have USB debugging on...
UPDATE: I found out the problem! The support files weren't in the root file I had the .exe in. I just moved the .exe to the same folder with the support files, and now I'm rooted and ready! Thanks!
Click to expand...
Click to collapse
how are you turning on usb debugging? I also have this tablet(purchased on black Friday from Walmart like everyone else) and mine doesn't seem to have that option anywhere. in fact, compared to the previous two android products I have, this device seems to lack ALOT of available functions. though I am capable of navigating a recovery menu at boot. but that doesn't do me any good for using pdanet. that seems to be my biggest road block. pdanet wont install because the onl;y way I can allow my device to connect to my pc with adp is using the adp updater in the recovery boot menu.
Desarial said:
how are you turning on usb debugging? I also have this tablet(purchased on black Friday from Walmart like everyone else) and mine doesn't seem to have that option anywhere. in fact, compared to the previous two android products I have, this device seems to lack ALOT of available functions. though I am capable of navigating a recovery menu at boot. but that doesn't do me any good for using pdanet. that seems to be my biggest road block. pdanet wont install because the onl;y way I can allow my device to connect to my pc with adp is using the adp updater in the recovery boot menu.
Click to expand...
Click to collapse
It is a hidden option that needs to be enabled. Follow this guide: www ninjaromeo com / enable-usb-debugging-developer-options-jelly-bean/
I just enabled this option on my Walmart BF 7" RCA RCT6378W2 tablet.
Sorry I had to mangle the link because XDA wont let me link external sources yet.
Glad I could help a few. Now, someone get on a functional recovery ;p
I have poked around a little at the stock recovery, backing it up, etc.. But am not brave enough to try and get CWM working on it.
I was able to use th Xposed framework for a few mod's no problem. Battery mod, reboot menu, hide navbar, etc.. But Xposed can only do so much.
Edit: I heard on reddit this tool also works for rooting. I have not tested it (already rooted with the other method).
http://www.cydiaimpactor.com/
Getting Debugging to work.
I was not drunk when I made this post...I have the RCT6378W2 if you go to about tablet in your settings and repeatedly tap the build number...the deveolper options will appear...I fell out of my seat when i discovered this.
On a side note...if you repeatedly tap the android version...a cute picture of the android jellybean will appear. Try it.
rca 7" dual core tablet root
Takenover83 said:
Glad I could help a few. Now, someone get on a functional recovery ;p
I have poked around a little at the stock recovery, backing it up, etc.. But am not brave enough to try and get CWM working on it.
I was able to use th Xposed framework for a few mod's no problem. Battery mod, reboot menu, hide navbar, etc.. But Xposed can only do so much.
Edit: I heard on reddit this tool also works for rooting. I have not tested it (already rooted with the other method).
http://www.cydiaimpactor.com/
Click to expand...
Click to collapse
im not down with kingo, too risky! gonna try impactor. i will report back soon :fingers-crossed:
---------- Post added at 09:31 PM ---------- Previous post was at 09:15 PM ----------
1: Install drivers. Seeing as RCA does not provide drivers, we had to find some that work. That's where PDANET comes in. Their drivers support a very wide range of Android devices. We are not installing it to tether. We just want the drivers it provides. So download PDANET, install, let it detect your device, install the drivers, and then afterwords you can uninstall it.
2: Enable Developer Options. Settings>About tablet> Tap Build Number a bunch of times till it's enabled.
3: Enable USB Debugging. Options>Developer Options>Click On (up top)>Then checkmark USB Debugging
That should clear up some of the confusion in this thread. How you root after step 3 is up to you. Personally, I did it with Kango. Which was straight forward. Connect device, hit a button, Say yes to a couple questions, reboot, presto done.
cueballs said:
It is a hidden option that needs to be enabled. Follow this guide: www ninjaromeo com / enable-usb-debugging-developer-options-jelly-bean/
I just enabled this option on my Walmart BF 7" RCA RCT6378W2 tablet.
Sorry I had to mangle the link because XDA wont let me link external sources yet.
Click to expand...
Click to collapse
Thanks, that sorted things out.
To make clear, and aid in any other inquiries, I managed to find an ADP connection mode, among other android update features. with the device off, hold volume up while turning the device on. it should boot to an image of an android with an open chest panel and the words, "no command". if you push volume up again it will provide you with options and instructions on how to execute. you can manual update the device with an SDK through USB ADP mode this way. I'm not sure if that makes anything simpler or generates a work around but I hope it helps with future development for this device.
Well got root now we need a recovery...
For some reason when trying to make sure I can send adb commands to my tablet, I am showing no devices connected. I check in device manager and it shows up as Android ADB interface for the tablet. These drivers were installed with the latest version of PDANet. Thoughts or how were you all able to get the drivers fully loaded and working? I have developer options already enabled and USB debugging mode is checked.
Info: RCA RCT6378W2 Tablet
Android 4.2.2
Kernal 3.0.36+
PDANet+ 4.12
Windows 7 64 Bit (I also tried it on my windows 7 32 bit computer)
GloryFreak said:
For some reason when trying to make sure I can send adb commands to my tablet, I am showing no devices connected. I check in device manager and it shows up as Android ADB interface for the tablet. These drivers were installed with the latest version of PDANet. Thoughts or how were you all able to get the drivers fully loaded and working? I have developer options already enabled and USB debugging mode is checked.
Info: RCA RCT6378W2 Tablet
Android 4.2.2
Kernal 3.0.36+
PDANet+ 4.12
Windows 7 64 Bit (I also tried it on my windows 7 32 bit computer)
Click to expand...
Click to collapse
You need to create "adb_usb.ini" in "Users>Username>.android".
Inside "adb_usb.ini" insert "0x2207" and save.
Source: http://blog.fh-kaernten.at/wehr/?p=1182
I need some help rooting this tablet. The point is when im installing the pdanet drivers the screen hangs saying installing drivers.. i finally was able to get the driver installed. but then king root can not connect to it. i checked the device manage and the abd phone is installed. so im not sure what im doing wrong.
scooter29 said:
I need some help rooting this tablet. The point is when im installing the pdanet drivers the screen hangs saying installing drivers.. i finally was able to get the driver installed. but then king root can not connect to it. i checked the device manage and the abd phone is installed. so im not sure what im doing wrong.
Click to expand...
Click to collapse
I had this problem too. make sure you're using the most recent version of pdanet. for whatever reason the older version just hang there and dont work right.
Installed the latest pdanet. It wont install the driver. I checked the device manager and it still shows the device without the driver. not sure what else to try..