[Q]Data2SD Unsuccessful Encryption - Asus Transformer TF700

Each time I boot up with the sdcard with the ext4 parition it shows "Encryption Unsuccessful".
I have formatted my 32GB microsd card to ext4 by using Minitool. I cannot access the micro sd via PC by using the card reader anymore because its a ext4 partition now. So I can't format and partition it again with Minitool. What should I do now?

Minitool is not recommended. Use gparted instead. Gparted is a linux utility, if you don't have linux installed you can burn linux and gparted to Cd and boot from the CD. 'Google for gparted live CD'

But now another problem is that the file system format is now RAW, and I can't format the microsd.

BlankZero said:
But now another problem is that the file system format is now RAW, and I can't format the microsd.
Click to expand...
Click to collapse
If you use Gparted, you can delete and re create new partition.Stop using mini tool, it's going to brick your SDcard.

buhohitr said:
If you use Gparted, you can delete and re create new partition.Stop using mini tool, it's going to brick your SDcard.
Click to expand...
Click to collapse
I'm trying to use Gparted but it won't format the darn microsd because of it being a RAW filesystem.

BlankZero said:
I'm trying to use Gparted but it won't format the darn microsd because of it being a RAW filesystem.
Click to expand...
Click to collapse
Have to try to delete it first?

When right clicking it, the delete button is greyed out. The only button that isn't is the New button.

BlankZero said:
When right clicking it, the delete button is greyed out. The only button that isn't is the New button.
Click to expand...
Click to collapse
New is to create new partition, go for it.

Alright so after clicking New, it says there is no partition table on the device. After that I tried creating a partition table as "msdos" and nothing happen.

BlankZero said:
Alright so after clicking New, it says there is no partition table on the device. After that I tried creating a partition table as "msdos" and nothing happen.
Click to expand...
Click to collapse
Nope, this is how you do it.
1. select new, then resize your first partition by drag the space to the left,until what ever size you want for the first partion, just say you set to 2gb. then select fat32, then give it a name called fat32, hit ok
2. click on the second RAW space, then select new again, this time just select ext4, then give it a name called ext4, hit ok
3. now on the top tab on "apply", Gparted will creating 2 partitions for you.
4. Once done, right click on the ext4 partition, then select flag, then select boot hit ok then you're done. Take the card out and put into your device.

buhohitr said:
Nope, this is how you do it.
1. select new, then resize your first partition by drag the space to the left,until what ever size you want for the first partion, just say you set to 2gb. then select fat32, then give it a name called fat32, hit ok
2. click on the second RAW space, then select new again, this time just select ext4, then give it a name called ext4, hit ok
3. now on the top tab on "apply", Gparted will creating 2 partitions for you.
4. Once done, right click on the ext4 partition, then select flag, then select boot hit ok then you're done. Take the card out and put into your device.
Click to expand...
Click to collapse
It won't let me access that point because each time I press new it keep saying "No partition table on device /dev/mmcblk0" "A partition table is required before partitions can be added. To create a new partition table choose the menu item: Device --> Create Partition Table.

BlankZero said:
It won't let me access that point because each time I press new it keep saying "No partition table on device /dev/mmcblk0" "A partition table is required before partitions can be added. To create a new partition table choose the menu item: Device --> Create Partition Table.
Click to expand...
Click to collapse
Seems like you brick the sdcard with minitool, try this, on the top select the partition recovery. Run it, it may reported that it's not find any, but some cases it may repair the partition table.

buhohitr said:
Seems like you brick the sdcard with minitool, try this, on the top select the partition recovery. Run it, it may reported that it's not find any, but some cases it may repair the partition table.
Click to expand...
Click to collapse
The option is Partition Recovery Wizard? If it is, I just tried that and It didn't find anything. In the end I don't think it fix the partition table.

BlankZero said:
It won't let me access that point because each time I press new it keep saying "No partition table on device /dev/mmcblk0" "A partition table is required before partitions can be added. To create a new partition table choose the menu item: Device --> Create Partition Table.
Click to expand...
Click to collapse
Well, then do that. You need to create an "msdos" partition table, then you can create partitions.

_that said:
Well, then do that. You need to create an "msdos" partition table, then you can create partitions.
Click to expand...
Click to collapse
Well I tried that but after that nothing happen. So looks like this microsd is bricked now huh.

BlankZero said:
Well I tried that but after that nothing happen. So looks like this microsd is bricked now huh.
Click to expand...
Click to collapse
After creating a partition table you should be able to create partitions.

It wasn't able to create any partition tables. When I clicked that it just paused for a bit and refreshed.

BlankZero said:
It wasn't able to create any partition tables. When I clicked that it just paused for a bit and refreshed.
Click to expand...
Click to collapse
What happens if you create a partition after that?

It will ask to make a create table. Basically a endless cycle.

BlankZero said:
It will ask to make a create table. Basically a endless cycle.
Click to expand...
Click to collapse
That's strange. Normally, after creating the partition table, the yellow triangle near "unallocated" goes away and then on "New Partition" you should get the "Create new Partition" dialog where you can define size, location and filesystem of the new partition.
To help diagnose your issue, please open a root shell and check the output of
hexdump -C /dev/sdX -s 510 -n 2
(replace X with whatever letter your card is shown in gparted)
You should get
Code:
000001fe 55 aa |U.|
which is the marker for the "msdos" partition table.

Related

Step by Step: How to partition ext2 with Paragon Partition Manager 9.0 - windows vers

HOW TO PARTION WITH PARAGON PARTITION MANAGER
**** YOU WILL LOSE ANY INFO ON THE SDCARD - PLEASE BACK UP IMPORTANT INFO PRIOR TO STARTING THIS PROCESS ***
**** these are instructions for Windows XP ***
***** if you are using Windows Vista - You need to change the permissions to Administrative in order for this to work - RIGHT CLICK ON THE START BUTTON AND GO TO ADMIN SETTINGS - even if you are the only user of the PC
have the sdcard in the card reader or in the phone mounted to the pc !!!!
OPEN PARTITION MANAGER...
CLICK ON PARTITION MANAGER IN THE LOWER RIGHT HAND CORNER..
then click on the line that represents the sdcard, and right click on it, and choose format partition.. name the volume label - fat32
then click format..
computer might hang for a minute or 2, and then a popup will come up and say click GREEN CHECK to apply changes..
click the GREEN CHECK IN THE TOOLBAR AREA..
you will then see another pop up show - apply changes, choose yes, then you will see OVERALL PROGRESS AND GEARS TURNING.. LET IT PROCESS AND TAKE ITS TIME.. DONT HIT CANCEL..
when its done the cancel button at the bottom will change to Close.. click it..
AND THE FIRST STAGE IS DONE...
NOW ITS TIME TO CREATE THE EXT2 PARTITION..
Now on the Left side of the screen click Create partition.. and a screen will now show Create New Partition Wizard... it lets you chose which drive to partition ( make sure you chose the sdcard - it will be the one with the smallest volume/size of the sdcard in gbs.. should be on the bottom )...
HIT NEXT
now a slider will appear where it says new volume....
move the slider with the mouse, and make it how big you want it.. for ext2 partiiton about 500mb to 1gb is plenty... 500mb is good size.. ( size wont be exact so get it close to the size you want..
WHEN DONE CLICK NEXT...
NOW IT GIVES YOU THE OPTION TO FORMAT THE PARTITION...
CLICK THE PARTITION TYPE DROPDOWN MENU AND CHOSE LINUX EXT2... AND GIVE IT A VOLUME LABEL OF ext2.
then click next...
PC WILL PROCESS AND HOURGLASS WILL SHOW WHERE THE MOUSE POINTER IS.. AND THEN A POP UP WILL SHOW - SAYING -
COMPLETING THE CREATE NEW PARTTITION WIZARD..
CLICK FINISH...
THEN IT TAKES YOU BACK TO THE SCREEN SHOWING THE DRIVES, AND WHAT YOU CREATED, AND THE OPTION AT THE TOP WILL SAY - APPLY ... choose apply
THEN IT WILL ASK YOU TO - APPLY PENDING CHANGES AGAIN, choose yes..
NOW YOU WILL SEE THE GEARS WORKING AGAIN.. LET IT RUN TILL IT SAYS complete..
*it will take a few minutes to process.. let it run...
you might get a pop up for the sdcard drive as a open folder on the pc just showing that its done, just go back to paragon and let it finish running...
once complete you will get a pop up saying SYSTEM RESTART IS REQUIRED TO COMPLETE OPERATION.. CHOSE RESTART THE COMPUTER...
You will see a paragon manager screen, that will hang for a almost a minute, and then the bar will fill saying 100 percent complete, press any key to reboot the pc..
AS LONG AS THERE IS NO ERRORS, YOUR DONE..
FORMAT COMPLETE..
PARAGON WILL START UP ON ITS OWN, AND SHOW THE PARTITIONS AS BEING COMPLETE..
----
*****edit
Originally Posted by Androidandy
check that the ext2 partition is good by typing busybox df -h in terminal.
************************************************************EDIT *****************
If your having issues using paragon partition manager, and trying to make a linux swap partition, try these instructions for formating thru Cyanogens newest recovery
Formatting you SDcard
You only need to do this once folks..if you already have 3 partitions including linux-swap move to step 2
You need Recovery image 1.31 to do this folks!
To format card SD card with linux-swap WARNING!!! this will reformat you entire SD card!!
You can use the recovery console and parted to format SDcards with 1.31 folks, no more going through hassles you have the tools on you G1!...here is an example of how to do this in recovery console using parted
Example for 8GB card (specific value's may be slightly different use print to verify your total SDcard size~!
Reboot and enter recovery
Enter console
#parted /dev/block/mmcblk0
#print (to verfiy we know what size card we are dealing with, the details should be straight forward)
rm 1
rm 2
mkpartfs primary fat32 0 7584
mkpartfs primary ext2 7584 8127
mkpartfs primary linux-swap 8127 8159
#print (to verify we have the 3 partitions)
Example for my 4GB card
#parted /dev/block/mmcblk0
#print (to verfiy we know what size card we are dealing with, the details should be straight forward * then grab a calculator to figure the exact amounts... as shown below that is an example..)
rm 1
rm 2
mkpartfs primary fat32 0 3420
mkpartfs primary ext2 3420 3932
mkpartfs primary linux-swap 3932-3964
"End?" you need to place the last value for the linux swap eg.3964 for my 4GB card
#print (to verify we have the 3 partitions)
Next we need to "quit" parted and upgrade our ext2 partition to ext3
#upgrade_fs
Swap value is set to 30 currently, you can change this by modifying the "echo" value for swappiness in the a2sd.sh script
swap partition shouldnt be no larger than 92mb
ext2/3 partition shouldnt be more than 500mb ( more than that is too much )
( directions from a post by justanothercrowd )
Thank You, for a great post but, can you please fix this link *** word docx with screenshots - http://kaysesoze.wordpress.com/wp-ad...ttachment_id=4
When I signed in I received the following message "You are not allowed to edit this attachment." Again THANK YOU,
V/R
Biz
stuck
I installed paragon parttition manager 9 pro trial version after installtion I reboot and , it brought me to the blu paragon advance recovery screen...I notice I forgot to back up my sd card...but it won't let me out of this screen...tried rebooting it still brought me back to this screen...is there any solution for this problem....its gotta be something easy...I just don't know what to do to get back to my desktop.....HELP!!!!!!!!!PLEASE!!!
biz18434 said:
Thank You, for a great post but, can you please fix this link *** word docx with screenshots - http://kaysesoze.wordpress.com/wp-ad...ttachment_id=4
When I signed in I received the following message "You are not allowed to edit this attachment." Again THANK YOU,
V/R
Biz
Click to expand...
Click to collapse
thanks for bringing that to my attention.. will try and fix it..
toconfuze1 said:
I installed paragon parttition manager 9 pro trial version after installtion I reboot and , it brought me to the blu paragon advance recovery screen...I notice I forgot to back up my sd card...but it won't let me out of this screen...tried rebooting it still brought me back to this screen...is there any solution for this problem....its gotta be something easy...I just don't know what to do to get back to my desktop.....HELP!!!!!!!!!PLEASE!!!
Click to expand...
Click to collapse
during the paragon process it says do not interrupt it while it is formating, cause you pc can become unstable. and thats exactly what you did.. u might be able to press the esc button, i believe it gives that option at the bottom of the screen to exit it properly. but rebooting was wrong...
anytime u FORMAT any drive or card you will lose information, thats pc fundamentals... will add the issue about losing info to orig post..
was stuck
thanks a lot....fixed
Help
I know I am always running into problems. But i am freakin out about this and i don't know if this is the right thread to be posting this or maybe someone can lead me to other thread with this fix.
Question
First i partitioned my mini sd card using my G1 with paragon manager and when everything was done the computer restarts.
But the weired thing is that now when i mount my G1. My G1 is recognized by my computer but it does not show me the storage device on my computer folder or even prompt me with opening a folder for my storoge card. I am freakin out.
Things i tried.
1. Rebooted my phone
2. nandrroid backup restore
3. restarted my computer
4. changed minisd cards.
5. uninstalling the usb android driver and reapplying it
6. went to usb debug on the settings on the phone
nothing worked.
Thanks . Any help would do.
------------------------
Fix ******Update
It took me alot of time to figure this out. if anyone gets this problem just assign your sdcard a Letter. Example: E: Drive.
When i look at these tutorials it does not mention anything like that.
thanks anyways
stonefurry said:
I know I am always running into problems. But i am freakin out about this and i don't know if this is the right thread to be posting this or maybe someone can lead me to other thread with this fix.
Question
First i partitioned my mini sd card using my G1 with paragon manager and when everything was done the computer restarts.
But the weired thing is that now when i mount my G1. My G1 is recognized by my computer but it does not show me the storage device on my computer folder or even prompt me with opening a folder for my storoge card. I am freakin out.
Things i tried.
1. Rebooted my phone
2. nandrroid backup restore
3. restarted my computer
4. changed minisd cards.
5. uninstalling the usb android driver and reapplying it
6. went to usb debug on the settings on the phone
nothing worked.
Thanks . Any help would do.
Click to expand...
Click to collapse
1. did you do the fat32 first, then ext2 second ?
2. did you mount the sdcard to the pc ?
3. may show as F drive on your pc !!!
I used PM 10, it is very easy. However when the program wants to reboot it says there is an error, but I check that the ext2 partition is good by typing busybox df -h in terminal.
I've partitioned several cards now and they all work.
I found that doing a wipe then installing Lucid's rom.
I reinstall my applications from mybackup pro and downloading others from the market.
I test everything is working fine, then and only then I use the scripts that Lucid posted.
To recap ensure that busybox recognises the ext2 partition then wipe, install Lucids rom
Androidandy said:
I used PM 10, it is very easy. However when the program wants to reboot it says there is an error, but I check that the ext2 partition is good by typing busybox df -h in terminal.
I've partitioned several cards now and they all work.
I found that doing a wipe then installing Lucid's rom.
I reinstall my applications from mybackup pro and downloading others from the market.
I test everything is working fine, then and only then I use the scripts that Lucid posted.
To recap ensure that busybox recognises the ext2 partition then wipe, install Lucids rom
Click to expand...
Click to collapse
thank you for the info..
was looking for the commands to verify that the ext2 partition is done correctly, and of course it verifies that busybox is working also..
I'm having a large issue with my new Micro SD card.
When using PM and my MicroSD in an SD adapter it allows me to format and create partitions successfully JUST FINE with my Sandisk 2gb which is probably a class 2 or just not a class at all...it doesn't say on the card at all.
BUT I just bought a Transcend 8gb Class 6 HC card and when using the SD adapter the computer recognizes it just fine to open and view files...BUT Paragon says its "Invalid" and won't allow me to format, partition, or anything.
I have no idea what needs to be done differently. It works just fine in the phone and moving files but Paragon won't recognize it or allow it to be modified.
I need some help please!!!
First of I'm new to all this so I'm a nood and I need some help massively I have trying to make this ext2 partition on ubumtu for months and always get an error message and a lost and found folder in the ext2 partition. Found these directions and finally make the partition w/ no error messages. Fat32 1st then ext2 2nd type busybox command so I think its done right. So I try to mkdir /system/sd/app for marcus directions on apps to sd to use his apps to sd2 app and I get error /system/sd/app read only. Why is that so? I look in pargan partitioner were I made the parition and there both still there. I would be greatfull if anyone can help out a nood like me [email protected]. I have been trying to get this ext2 partiton for months and today thought I did it correct cause no error messages and boy was I wrong!! Please anyone help !!
Bronze G1 W/ JF 1.5 cupcake W/Areo
NO APPS TO SD1! HELP PLEASE
Saphire SLP
[email protected]
i like this tuturial, but one problem, doesnt work with vista 64bit -.-
im literally crying
So every time I try to format, my phone unmounts my damn card.
Any ideas?
worked for me on vista 64
missxoash said:
So every time I try to format, my phone unmounts my damn card.
Any ideas?
Click to expand...
Click to collapse
Using Paragon or windows?
missxoash said:
So every time I try to format, my phone unmounts my damn card.
Any ideas?
Click to expand...
Click to collapse
im have the same problems as her, i dunno why
I am running vista 64 and paragon profesional. I can get it to format and can get the ext2, but I can not do anything with the card. I try and reformat the fat32 and give it a letter for a drive but it wont take or if i format it and then create the ext2 it gives the ext the drive letter(both cannot have a drive) What gives and in the meantime I have to use the 1gig because although paragon recognizes the sd card my pc does not!
so i've done everything in the tutorial. and even the coding for checking busybox.
it doesnt show the ext2.
and i tried running the lucid commands
and it says ext2 is not mounted.
i get all the way to the ext2 part the very last thing
like mount/dismount and i get a error
saying to close a program or restart pc
cant close program because i dont know what it is so i click retry same error
i restarted pc 2 times
still same thign tried reformatting all over again what am i doing wrong? thanks guys!
pr0cl1v1ty said:
i get all the way to the ext2 part the very last thing
like mount/dismount and i get a error
saying to close a program or restart pc
cant close program because i dont know what it is so i click retry same error
i restarted pc 2 times
still same thign tried reformatting all over again what am i doing wrong? thanks guys!
Click to expand...
Click to collapse
are u using a sdcard reader ??

A Definitive A2SD How to, the easy way (With Pics!)*

*There are many ways to setup an SDCARD for A2SD, but some people don't feel comfortable doing it in recovery, or their recovery doesn't support it, or they don't rely on recovery, or they are scared of the adb shell. This is a newbie friendly way that anyone can do..
What's a VERY easy way to setup your sdcard for apps 2 sd? With Linux!! (don't run in fear yet! Follow along with me!)
Some background to read first:
Backup all your stuff before hand!
Think of it just like if your repartitioning your hard drive. It's that simple.
OK! So here we go!
Setup:
Go here: http://www.ubuntu.com/desktop/get-ubuntu/download
I suggest you select the 32bit option, and 10.10(latest) version. Click download
I also suggest unless you know how to use unetbootin, or how to burn an iso image(very easy) that you read the how to from that download page on doing so.
Links: cdburnerxp (if you don't already have a cd burning utility. I HIGHLY recommend it)http://cdburnerxp.se/en/home
unetbootin: (for booting from thumb drive) http://unetbootin.sourceforge.net/
*Some older PC's (and I mean unless made within the last 3 years recent) have trouble booting unetbootin made live thumb drives, so if in doubt, just eat the 20cents you paid for that cd-r and get it right the first time.
1a. BACKUP EVERYTHING ON THE SDCARD!
Cannot stress this enough as the way we are doing this, you will lose EVERYTHING on your SD card. I am not responsible for your adhd!
Execute!
1.boot to ubuntu live cd *see your motherboard instructions on how to boot to cd if it does not automatically but usually when you boot it will give an option to "Change Drive Boot Order" or something similar, by pressing F8, F9,F10, or F11, but if you do not see this, and it does not automatically boot to the ubuntu live cd, go into your BIOS at startup of your computer (which varies depending on the computer/motherboard, but usually it's either the Delete key, or F1 at boot, and change your drive boot order to boot from cdrom first)
1a. Just boot into Ubuntu. It wont hurt ya! And heck you might like it! It doesn't mess with any files on the system unless you intentionally do so.
2.put sdcard in computer
3.go to System > Administration > Disc Utility
Uploaded with ImageShack.us
4.
Select your sd card from the "Storage Devices" list on the left.
Select your sdcard volume
Click "Unmount Volume"
Uploaded with ImageShack.us
5.
Select the volume again and select Delete Partition
***IF YOU HAVE NOT BACKED UP YOUR STUFF YOU WILL NOW LOSE IT!!!! BACK UP YOUR STUFF!!!***
Uploaded with ImageShack.us
6.
Now you have a fully wiped SD Card. Congrats, not good for much at the moment
Ok, so now the magic happens. Select Create Partition
Uploaded with ImageShack.us
7.
I put 512 just cause I was messing around but for a swap, I would do between 40 and 80mb. You don't have to name it, just make sure you select Swap Space from the partition type, and the size you want. Click Create. *DO NOT SELECT Encrypt underlying device. It WILL NOT WORK!* If you do that, your phone wont read it and well.. Then that would be just pointless now wouldn't it?
Uploaded with ImageShack.us
8.
Notice it looks like a pie or a chart? See it's not hard at all now is it? It's pretty simple from here.
Uploaded with ImageShack.us
9.
Select the "Free" partition space, and then select "Create Partition" again.
Uploaded with ImageShack.us
10.
Uncheck "Take ownership of filesystem" because if you do, you probably won't have "Ownership" of the partition when you put it in your phone which would probably turn out to be a bad thing. Select type "Ext3" and select create.
You can do Ext2 or Ext4, but I have heard issues about Ext4 partitions, and Ext2 is kinda old ya know? I mean you can do it if you want, but I dunno what to say if it don't work (you can always repartition though)
As far as space, that's up to you. If you think you just need a tad of space available for downloading games and stuff, go with 40 to 100mb, but if your like me and want EVERYTHING (BUHAHAHHA!) Go with between 250 and 512mb. Keep in mind that when you activate a2sd, you may also want to copy over dalvik cache which will take up a fair amount of space. btw, I never was able to get close to 200mb taken up on this partition when I had a2sd running on my phone..
11.
Select the "Free Space" again from the Volume chart, and click create partition.
Uploaded with ImageShack.us
12.
Now we are going to finish this off! For the Size, leave it be! It's the remainder of the drive, which is how much space is left after we have made the previous two partitions. Select the type as "Fat"(yes it is fat32, I don't think the disk utility handles old fat16 anymore..) and select create.
Uploaded with ImageShack.us
13.
DONE! Now you have a happy sdcard ready to take on your Dalvik Cache, any programs you download AFTER setting up the card, flashing your rom, and or your swap if you activate it (different roms take different approaches to this but many activate A2SD automatically. Something else of note. 2.2/Froyo roms have built in A2SD-Like functionality that uses the fat32 partition, so the Ext partition is not needed).
Select "Safe Removal" and take out your sdcard and put it into your phone. Your now ready for takeoff
Uploaded with ImageShack.us
***See your ROM's thread for details on how to activate swap, and move Dalvik cache to the sdcard after this is finished or if it activates automatically.***
14. If your reading this last line, your probably scratching your head thinking to yourself "How the hell do I get out of Ubuntu and back into my Windows system?!". It's simple. Click the Power Icon in the top right corner of the screen, and select "Shutdown" from the list. After it shuts down so far, it should spit the cd out. Take the disc out of the try, and press enter, and it will reboot the system, and you will wake back up in microsoft land and you can forget this ever happened
Nice guide Really good to have
is there a guide for those of us not affraid of using recovery somewhere?
Thanks for this! Also helps that i use Ubuntu anyways
xjayman said:
is there a guide for those of us not affraid of using recovery somewhere?
Click to expand...
Click to collapse
(Copied and Pasted from: http://forum.xda-developers.com/showpost.php?p=7021325&postcount=2)
A. backup your sd card to your computer. can't stress this enough, as partitioning will wipe the entire card.
B. Reboot into recovery
c. In android system recovery, select partition sdcard
d. In the partition sdcard menu, select partition sd
e. Follow the instructions on the phone to partition your sd card. You can optionally set a swap file while you are partitioning your sd card.
F. In the partition sdcard menu, select sd:ext2 to ext3. Follow the instructions on the screen.
G **skip**
h. Press the back button on the phone to go back to the main menu.
I. Put the a2sd file on the sd card (and all your other files you backed up earlier) by selecting usb-ms toggle and transfer the files to your computer.
3. In recovery, select flash zip from sdcard.
4. In flash zip from sdcard, select the a2sd package file you downloaded earlier. Press home to flash.
5. Reboot phone.
This actually seems a lot less scary then using a Live-CD! To each there own.
JusticeAA said:
(Copied and Pasted from: http://forum.xda-developers.com/showpost.php?p=7021325&postcount=2)
A. backup your sd card to your computer. can't stress this enough, as partitioning will wipe the entire card.
B. Reboot into recovery
c. In android system recovery, select partition sdcard
d. In the partition sdcard menu, select partition sd
e. Follow the instructions on the phone to partition your sd card. You can optionally set a swap file while you are partitioning your sd card.
F. In the partition sdcard menu, select sd:ext2 to ext3. Follow the instructions on the screen.
G **skip**
h. Press the back button on the phone to go back to the main menu.
I. Put the a2sd file on the sd card (and all your other files you backed up earlier) by selecting usb-ms toggle and transfer the files to your computer.
3. In recovery, select flash zip from sdcard.
4. In flash zip from sdcard, select the a2sd package file you downloaded earlier. Press home to flash.
5. Reboot phone.
This actually seems a lot less scary then using a Live-CD! To each there own.
Click to expand...
Click to collapse
thank you !
Thank you so much for this!
I used Superoneclick to root, so I didn't have the same partition options needed to create the extensions as noted in the other instructions in the recovery methods.
Appreciate it!
So I did the A2SD and have used it successfully for awhile now, I recently got a new card that is larger/faster and have already set it up for A2SD as well. Is there an easy way to transfer the apps from my first card to my new one without using linux? I did my partitioning in recovery.
indiscriminant said:
So I did the A2SD and have used it successfully for awhile now, I recently got a new card that is larger/faster and have already set it up for A2SD as well. Is there an easy way to transfer the apps from my first card to my new one without using linux? I did my partitioning in recovery.
Click to expand...
Click to collapse
Actually no. The only way you can do that in windows is by using linux explorer or some other compatibility program to use windows to see ext partitions...
Thanks, I will just redownload everything later then using App Brain.
OK, I completed all steps but when I put the card in the phone or in Windows, it shows up as RAW and says I have to reformat.
I did everything twice just to make sure I did it correctly, but no go.
Any ideas?
Thanks!
neemypeemy said:
OK, I completed all steps but when I put the card in the phone or in Windows, it shows up as RAW and says I have to reformat.
I did everything twice just to make sure I did it correctly, but no go.
Any ideas?
Thanks!
Click to expand...
Click to collapse
In windows, because of the ext partition it wont see those, however instead it would just ignore the ext partitions and just load the fat partitions....
You can reformat the remaining fat space in windows if you would like. It won't hurt the ext3 partition, but it shouldn't come up with any errors... Go ahead and reformat the fat partition in windows, and then see if the phone sees it (and make sure it's to the size you wanted).
When I try to reformat it only will let me reformat the swap file.
Here's a screen shot.
I've done the ubuntu steps twice, so not sure what I'm doing wrong, it's pretty straight forward.
First was formatted as swap, second ast the EXT3, third as FAT in Ubuntu.
neemypeemy said:
When I try to reformat it only will let me reformat the swap file.
Here's a screen shot.
I've done the ubuntu steps twice, so not sure what I'm doing wrong, it's pretty straight forward.
First was formatted as swap, second ast the EXT3, third as FAT in Ubuntu.
Click to expand...
Click to collapse
This is quite odd indeed.... Just to ask (and really JUST to ask) which version of windows are you using there? I know it had no bearing on it though... Which also is strange that it shows the rest of the partitions the way they are.. All but the last one should be shown as an "Unknown Partition". Did you use a Virtual Machine to do it? Could be the reason but I am not for sure...
Windows 7 64bit
I will give it another go!

[Utility] ext4 data2sd for Froyo ROMs

If you are always low on program memory, this data2sd might be for you. It works with any Froyo for the G3.
Note: This won't wipe your data, but you should have a backup, just in case. First backup the phone to the SD card, then the SD card to your computer. Be cautious. I give no guarantee whatsoever. If your phone behaves funny, even eats your cat afterwards, I take no responsibility.
Note: starting with version 3, the new storage size will NOT be reflected in the Task Manager or in Titanium Backup. I'll see what I can do about it.
You need a rooted phone and an SD card, preferably 2 GB or more and class 6 or better (higher). data2sd doesn't make your phone faster. Much to the contrary: it extends your memory at the cost of speed. That said, if your SD card is of a class smaller than 6, this will work too. The slowdown, however, will be noticeable in some situations.
Three steps are needed. First, we need a kernel with built-in ext4 if you don't have one. Second, we bring the data2sd into its place. And third, we create an ext 4 partition with the desired size. Now follows a detailed description of these steps.
Step 1: Check your kernel
You need a kernel with built-in ext4 capability. The custom ROMs mostly have one. If you are running a stock kernel, you must install one, e.g. from http://forum.xda-developers.com/showthread.php?t=978823 . Follow the installation steps detailed there. (Changing the kernel does not wipe your phone).
Step 2: Install data2sd
You now must install data2sd onto your phone. As long as you didn't modify your SD card (as long as partition #2 is not ext4), this will have no further impact on your phone.
Download data2sd.zip from below and unzip it. There's a single file in there: data2sd.sh. Use the tool that suits you best to transfer it to the SD card of your phone. With adb, you would do
Code:
adb push data2sd.sh /mnt/sdcard
Now either start a terminal emulator with a root shell or use adb again. With adb, you would execute
Code:
adb shell
Make sure you are root (the prompt reads '#'), else run "su". Now type in:
Code:
# sh /mnt/sdcard/data2sd.sh
You will see some lines about what is happening and a final confirmation.
That's it. Again, your phone will continue to behave as usual.
Step 3: Prepare your SD card
You can use any amount of program memory up to the size of your SD card, but be sure to leave some room for application data on the normal (#1, vfat) partition. As a rule of thumb, 0.5 GB of program memory will satisfy most needs, 1 GB is plenty.
If you're running Linux, prepare a second partition (must be partition #2) with the desired size. Use the usual utilities to do so. This includes gparted, but there are also other means. If you use gparted, you can follow the description for Parted Magic below.
If you have no access to a Linux computer, even not your friend's, your (probably) best choice is to run Parted Magic from a live CD. For this, go to http://partedmagic.com, and burn your CD. Instructions on how to do it with different burning tools are also there.
Step 3.1: Partition and format your SD card with Parted Magic (also applies to gparted)
The following describes the steps to partition your SD card with Parted Magic. You don't need to use this method - use the tool that suits you best.
I assume you have gparted or Parted Magic running and your SD card inserted into the card reader of your PC. Now select your card from the drop-down menu of available drives in the upper right corner. You better double check that you're on the correct drive (card). It will happily erase your system disk if told to do so.
Right click near top into the block designating your current partition #1. Select "resize". (I assume that your partition #1 is the only one. If not, delete the other partition(s)). Change the size to the total size of your SD card minus the desired size for program storage (/data). Confirm your selection.
There is now a gray block designating free space to the right of your first partition. Right click it and select "New". In the following window, leave the sizes as they are. Leave "create as" to be a primary partition, and change "file system" to ext4. Confirm your selection ("Add").
The gray block at the right has changed to a colored frame. Right click it again and select "Format as". Select "ext4".
If everything went well, you can now click on the green check mark in the icon bar near the top, confirm, and watch Parted Magic resizing your normal (#1, VFAT) partition and creating the new ext4 one.
4. Finale furioso
Now insert the SD card and reboot your phone. The Task Manager will report the new size in its rightmost tab, as do the other utilities like Titanium. All user apps and data should be in place. All will look like you have soldered in an extra chunk of internal memory. Despite not being directly visible, your program memory is resized to be the new partition. You see its size and its usage (in percent) by running
Code:
df
from adb or from a terminal emulator. Have a look at the subdirectories of /data displayed there.
As a final step, you can safely remove data2sd.sh from your SD card (/sdcard). It is not needed any more.
Q&A
* How can I remove my SD card while the phone is on?
You can't. Don't try. Always switch your phone off before you remove the SD card.​* How can I return to the state before data2sd?
Remove the SD card. All user data and apps will be there in the state you left them before you installed data2sd. The data2sd script you have installed simply does nothing as long as there is no ext4 #2 SD partition.
If you want to reuse the SD card, remove partition #2. This can be done with each partitioning tool, you don't need Linux.​• What about app2sd from Kyrillos 3.0? Is it compatible?
Yes. But "no" for the "no wipe" version which was offered for a short period of time. In the latter case, clear out the ext4 partition (important: do not forget the hidden .data2sd_initialized file) or simply reformat it before reusing it.​* It doesn't work. What can I do to help diagnose the problem?
See if the file /mnt/asec/data2sd/log.txt exists. If it does, have a look at it and try to make sense of it. If it doesn't tell you anything useful, add it to your error description in the forum here. If there is none, mention that in the description.​* What things must be considered if I flash a new ROM?
As always with such actions, make sure you have a backup. That said, just flash the new ROM and then install data2sd. When you reboot with the SD card in place, all user Apps and all data should be there. No restore from backup required.
Only in the rare case that the new ROM explicitly requires you to NOT restore your old data, e.g., from Titanium, you should reformat your ext4 partition (to clear it out) and proceed as advised by the ROM makers.​Versions:
2011-03-19 Initial release
2011-03-21 Version 2
- Updated for ROMs without /system/etc/init.d
- Simplified installation of the core parts
2011-03-23 Version 3
- Vibration bug fixed
- App2SD mode added: If the ext4 partition bears the volume label "app2sd" on a new blank SD, only /data/app is moved. This greatly reduces size benefits, but results in nearly no speed loss.
- Just run the data2sd.sh file (as described in step 2) to upgrade without data loss.
- Note: the actual size will NOT be reflected as described in the Task Manager or in Titanium.
Gosh this sounds so complex and risky! Isn't there a easier way?
☞★sent from my Galaxy3!!
♪drajax!! ♬♂ツ
drajax said:
Gosh this sounds so complex and risky! Isn't there a easier way?
☞★sent from my Galaxy3!!
♪drajax!! ♬♂ツ
Click to expand...
Click to collapse
Flash Kyrillos' v3.1 where's the script's allready built in...
It is less complex than it sounds. The description is just really very detailed. The details may sound confusing until you try it. And if you have access to Linux, it is really simple. We Linux users also have to use a different operating system when we flash our phones.
Alternative: Install Kyrillos 3.1. It contains the same data2sd and comes with a partitioning tool. But, as far as I can tell, you need to reformat the SD card's vfat part on the phone and lose the data there (not sure, however).
when i try to set permissions it says permission denied . Any help?
http://www.appbrain.com/app/move2sd-enabler-(root-only)/com.leinardi.setinstalllocation
Just one quick question....
I am having the stock JPM ROM... in that case do i need to have some new Kernel to use your data2sd???
I'll be using this!
Sent from my ACID Lestatious v1.4.5.5 Galaxy 3 FROYO
When i write down "/ # cd /system/etc/init.d/"
it says "sh: cd: can't cd /system/etc/init.d/"
What am i doing wrong???
Pinak.ahuja said:
when i try to set permissions it says permission denied . Any help?
Click to expand...
Click to collapse
You're not in a root shell. Enter "su" as your first command.
next2devil said:
When i write down "/ # cd /system/etc/init.d/"
it says "sh: cd: can't cd /system/etc/init.d/"
What am i doing wrong???
Click to expand...
Click to collapse
Don't know. Try this:
cd /system
cd etc
cd init.d
and report where it fails and if you are using adb or a terminal emulator. If it doesn't fail, continue with the line after the cd command.
Awesome work mizch!
We can refer to below link for partitioning of sd card to ext4 using adb
http://forum.xda-developers.com/showthread.php?t=534714
Hi Mizch,
Thanks for the script. have few questions; requesting for an answer:
1. Once data2sd is done, will sd card be auto mounted on reboot?
2. I am running JPM with Apollo's data2sd (ext2 partition for apps 1.1GB). What will be the benefit of ext4 over ext2?
3. I understand that i have to remove apollo's lagfix and then apply ext4 data2sd. Is there a way, i can also apply lagfix?
Thanks
jaskiratsingh said:
Hi Mizch,
Thanks for the script. have few questions; requesting for an answer:
1. Once data2sd is done, will sd card be auto mounted on reboot?
Click to expand...
Click to collapse
Yes. And for the first boot, it gets initialized too.
2. I am running JPM with Apollo's data2sd (ext2 partition for apps 1.1GB). What will be the benefit of ext4 over ext2?
Click to expand...
Click to collapse
Reliability, especially in crash cases and generally when the phone is shut down without a clean unmount. Ext 4, being a journaling file system, tries to keep the file system in a consistent state whenever possible. ext2 does nothing like that. So, when you forcible switch off your phone by long pressing the power button, most likely you are continuing with a damaged file system whose errors accumulate from now on and will eventually become visible at some time later.
There's one drawback, however: ext4 has to write more data than ext2. ext4 must always write the information needed to reconstruct a consistent file system to its journal.
3. I understand that i have to remove apollo's lagfix and then apply ext4 data2sd. Is there a way, i can also apply lagfix?
Click to expand...
Click to collapse
If I'm correct, the lagfix converts /data (your program storage) to ext2. Since /data is now handled by data2sd and converted to eyt4 anyway, you cannot use lagfix any more. You need to remove it.
mizch said:
If I'm correct, the lagfix converts /data (your program storage) to ext2. Since /data is now handled by data2sd and converted to eyt4 anyway, you cannot use lagfix any more. You need to remove it.
Click to expand...
Click to collapse
Thanks for the quick reply mizch. If i have to check apart from data, if anything else is converted into ext2, how can i do that?
jaskiratsingh said:
Thanks for the quick reply mizch. If i have to check apart from data, if anything else is converted into ext2, how can i do that?
Click to expand...
Click to collapse
have a look at the output of 'mount' or 'busybox mount'.
rm 02-app2sd for who use kyrillos ROM...i didn't do that command..but it seems works fine...what does it change if i use that command???
mizch said:
Don't know. Try this:
cd /system
cd etc
cd init.d
and report where it fails and if you are using adb or a terminal emulator. If it doesn't fail, continue with the line after the cd command.
Click to expand...
Click to collapse
I tried what you mentioned.... but again it shows the same error. It works well till "cd etc". Then, for init.d it shows out the error.
It seems the location for init.d is different in my device
next2devil said:
I tried what you mentioned.... but again it shows the same error. It works well till "cd etc". Then, for init.d it shows out the error.
It seems the location for init.d is different in my device
Click to expand...
Click to collapse
Yes. Probably there is none. What ROM are you using? Is it a Froyo ROM and from where?

[Q] How to create app folder

I used GParted under Ubuntu to partition my SD Card to Fat32/Ext3/Linux-Swap, but now for god knows why reason I can't create folders in my ext3 partition.
So my question is: Does anyone knows how to create "app" partition in my ext3 partition. I pretty sure it's not from card reader, cause I can manage my fat32 partition.
Thanks in advance!
Do you have Root Explorer? If so, go into your SD-ext and make a folder called App. Did you make the partition Primary or Logical? Primary good, Logical bad. Is it "active" I don't use GParted but rather Minitool Partition Wozard b/c it preserves your data, unless you want to fill in the sectors with 1's and 0's.
Woodrube said:
Do you have Root Explorer? If so, go into your SD-ext and make a folder called App. Did you make the partition Primary or Logical? Primary good, Logical bad. Is it "active" I don't use GParted but rather Minitool Partition Wozard b/c it preserves your data, unless you want to fill in the sectors with 1's and 0's.
Click to expand...
Click to collapse
Yes, it is Primary. Yes, I have root explorer. Thanks. I forgot that I can access ext3 from Root Explorer. *shame*
I'm use to used Partition Wizard too, but I was under Ubuntu and I didn't want to switch to Windows7. Thanks mate.
P.S.: I will hit "Thanks" tomorrow. I already used all 5 for Mioze.

(Help)ReFormat Sd

Hy There,another silly Q from me!(sorry :angel, i made a lot of things with my sd(partition and all that)and now i just want to format for my android again, but Minitool dont give me that option, it give me CREATE PARTITION option but i just want to format without partition, Windows dont recognize my sd cause aint formatted, what can i do?and....ntfs or fat 32, and.....primary or logical?
thank you all
I recommend using SD Formatter 3.1 for SD/SDHC/SDXC by the SD Association
You might need to Google it as I can't post links yet.
Parted Magic
I suggest using parted magic or any equivalent pre windows boot partion management tools , beleive me they work wonders .
yes but the problem that i have, or question is this, cant i format without partitions?because the only way i can format now is doing a partition, and i let all the space of the sd in that partition, but i dont want more partitions.please, step by step.
thank you
maxxxz said:
yes but the problem that i have, or question is this, cant i format without partitions?because the only way i can format now is doing a partition, and i let all the space of the sd in that partition, but i dont want more partitions.please, step by step.
thank you
Click to expand...
Click to collapse
Parted magic > recreate mbr > create a single partition > voila

Categories

Resources