I'm getting error while factory reset.
E:format_volume: rfs format failed on /dev/block/stl10
Please someone help me please.
[email protected] said:
I'm getting error while factory reset.
E:format_volume: rfs format failed on /dev/block/stl10
Please someone help me please.
Click to expand...
Click to collapse
try flashing using the latona.pit to have a correct repartition using the stock rom. you could use the search engine to find a guide how to flash back to a stock rom. or you could just google it.
Related
k im following the instructions to install a rom in this thread http://forum.xda-developers.com/showpost.php?p=16427887&postcount=3 and im at the first steps
and im at the part where i have to wipe data/factory reset
how long does this take? also its telling me that E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p2
is this normal?
any ideas guys? it skipped that part and now it says its formatting /sdcard/.android_secure is this gonna take awhile?
anybody? i could really use your guys' help
I am using Smil bean 3.1 based on CM 10 Alpha 4, Kernel- 2.6.35.7. after installing is i've replaced the file /system/build.prop after seeing the post -
http://forum.xda-developers.com/showthread.php?t=1933837.
After that I have lost the Exchange, after rebooting need a lot of time to get the network signal, sometime got black booting screen. But the main prob is i can't flash any other rom. Tried few time properly (resetting user data, formatting cash, formate dlvk cash. after installing is shows E:unknown volume/cash not found or cash no mount, no log ect and came back to old Slimbean,
Sow can i replace the old Build.prop?
AnYOne Help??
ghunpoka said:
I am using Smil bean 3.1 based on CM 10 Alpha 4, Kernel- 2.6.35.7. after installing is i've replaced the file /system/build.prop after seeing the post -
http://forum.xda-developers.com/showthread.php?t=1933837.
After that I have lost the Exchange, after rebooting need a lot of time to get the network signal, sometime got black booting screen. But the main prob is i can't flash any other rom. Tried few time properly (resetting user data, formatting cash, formate dlvk cash. after installing is shows E:unknown volume/cash not found or cash no mount, no log ect and came back to old Slimbean,
Sow can i replace the old Build.prop?
AnYOne Help??
Click to expand...
Click to collapse
From the main page of CM10 Alpha 4..if you have spent time reading it...
IMPORTANT! READ BEFORE FLASHING THIS RELEASE!
2. Once on this ROM, the most effective way of going back to any other ROM would be to repartition from Odin.
If you did not keep a copy of the original build.prop before you replaced it, you got nothing to go back to
yeah, the best way is to repartition and flash back to stock rom. after that, flash cfroot and then cm10 a4 first. when you have finished flashing cm10 a4, that is the time you can flash other roms based on cm10. hope i helped.
imboy25 said:
yeah, the best way is to repartition and flash back to stock rom. after that, flash cfroot and then cm10 a4 first. when you have finished flashing cm10 a4, that is the time you can flash other roms based on cm10. hope i helped.
Click to expand...
Click to collapse
I have been trying to re-partition by Odin and go back to stock rom 2.3.6 DDLF, but Odin can't re-partition it. 1st time it flashed the stock rom but stacked on boot loop. I've even tried to data reset on recovery mood but its show- "E: format_volume: rfs format failed on /dev /block / stl10
Could not understand what to do
ghunpoka said:
I have been trying to re-partition by Odin and go back to stock rom 2.3.6 DDLF, but Odin can't re-partition it. 1st time it flashed the stock rom but stacked on boot loop. I've even tried to data reset on recovery mood but its show- "E: format_volume: rfs format failed on /dev /block / stl10
Could not understand what to do
Click to expand...
Click to collapse
Have you tried flashing first KPE stock rom (with pit, pda, modem, csc files)? If not, try flashing it first and then upgrade to LF2.
Sent from my GT-I9003 using xda app-developers app
I was using parandroid 2.53 then ı wanted to update to 2.54 but I could not do.So ı wanted to go back stock rom as DDLF2..I flashed this rom with odin therefore phone didnt open just play animayion of samsung..I knew I shuld wipe dat and wipe cache..I wiped the phone but still cant open..when formating there is a fail as 'E:format_volume: rfs format failed on dev/block/stl10' I think my problem abaout this but I dont know what ı should do..please help me what should I do??(I tried XXLE4 but nothing chanced)
Better flash from kpe+pit and then DDLF2.
That problem probably because of your current phone partition is ext4, and you are trying to flash rfs partition inside.
PS. flash with pit file, your data will be gone.
alex88510 said:
Better flash from kpe+pit and then DDLF2.
That problem probably because of your current phone partition is ext4, and you are trying to flash rfs partition inside.
PS. flash with pit file, your data will be gone.
Click to expand...
Click to collapse
dude thanks a lot..now there is no problem its working
I have CWM 5.0.2.7. I want to upgrade from 2.3.6 Gingerbread to Android 4(PACMAN ROM preferred). I tried at least 50 - 75 times flashing >5 different ROMS, almost once bricked my phone... I found stable Gingerbread 2.3.6 and I am using it right now. I really want to upgrade to version 4, because I develop apps in Buzztouch and they will now support Android devices with Honeycomb or later. My question now is: how can I really upgrade to Android 4, because every ROM I flash is stuck at the first boot. Any help?
There is absolutely zero possibility of bricking your phone in flashing custom ROMs unless you do it in a wrong way (flashing other phone's ROM ). Same thing goes for bootloop. Wipe data,cache, dalvik cache and even format /system before flashing and also do wipes after flash. This way u can view a new dimension to the android world
swat4samp said:
There is absolutely zero possibility of bricking your phone in flashing custom ROMs unless you do it in a wrong way (flashing other phone's ROM ). Same thing goes for bootloop. Wipe data,cache, dalvik cache and even format /system before flashing and also do wipes after flash. This way u can view a new dimension to the android world
Click to expand...
Click to collapse
I already knew everything you said, even more, but thanks for idea of formatting /system. Maybe that is the main problem. Thank you so much!
UPDATE! Nothing is working. I think I will give up on ROMing.
Lol which baseband are u on? Try to flash latest stock rom ie DXKT7 and then flash a custom rom.
swat4samp said:
Lol which baseband are u on? Try to flash latest stock rom ie DXKT7 and then flash a custom rom.
Click to expand...
Click to collapse
I cannot find any with DXKT7 baseband. I am on XWKTI.
I got the same problem. Flashing from stock 2.3.6 XWKTI to any other cm 10.1 rom is not working. Clearing caches etc. does not help.
Any solution to this?
The latest rom I tried is cm-10.1-20130907-NIGHTLY-beni.zip. No luck so far.
What is wrong here?
Solved. I used the wrong CWM. beni_cwm-5_ext4_v2.tar does the trick.
Junnix said:
Solved. I used the wrong CWM. beni_cwm-5_ext4_v2.tar does the trick.
Click to expand...
Click to collapse
How did you solve the problem?
AleksaSavic said:
How did you solve the problem?
Click to expand...
Click to collapse
Did u ever successfully used ny custom rom b4.. or is this ur 1st chance...??
AleksaSavic said:
How did you solve the problem?
Click to expand...
Click to collapse
The CWM you use might be a one which is not working. At least I used a CWM 5.0.2.7. But it was rfs which is not compatible with the S5670.
So install CWM beni_cwm-5_ext4_v2.tar and you will be able to install any custom rom without problem.
Junnix said:
The CWM you use might be a one which is not working. At least I used a CWM 5.0.2.7. But it was rfs which is not compatible with the S5670.
So install CWM beni_cwm-5_ext4_v2.tar and you will be able to install any custom rom without problem.
Click to expand...
Click to collapse
It is this:
http://forum.xda-developers.com/showthread.php?t=1339640
BRO F U WANT TO UPDATE TO 4.+ THEN FOLLOW THESE STEPS
BOOT TO RECOVERY
WIPE DATA
WIPE CACHE
ADVANCE>>WIPE DALVIK CACHE
MOUNTS AND STORAGE>>FORMAT SYSTEM
INSTALL THE ROM U WANT
WIPE DATA
WIPE CACHE
REBOOT
WAIT FOR 5-10 MINS AS IT TAKS TIME FOR FIRST BOOT
STILL NOT HAPPENING
THEN UR DOWNLOADED FILE MUST BE CORRUPTED SO DOWNLOAD THE FILE AGAIN
Galaxy_Rohit said:
Did u ever successfully used ny custom rom b4.. or is this ur 1st chance...??
Click to expand...
Click to collapse
Flashed custom ROMs at least 75 times. I am not a newbie.
Junnix said:
The CWM you use might be a one which is not working. At least I used a CWM 5.0.2.7. But it was rfs which is not compatible with the S5670.
So install CWM beni_cwm-5_ext4_v2.tar and you will be able to install any custom rom without problem.
Click to expand...
Click to collapse
I already have CWM 5.0.2.7. Can I install it again via Odin or not?
ZmisiS said:
It is this:
http://forum.xda-developers.com/showthread.php?t=1339640
Click to expand...
Click to collapse
I flashed that already(I think).
vinayaksuresh said:
BRO F U WANT TO UPDATE TO 4.+ THEN FOLLOW THESE STEPS
BOOT TO RECOVERY
WIPE DATA
WIPE CACHE
ADVANCE>>WIPE DALVIK CACHE
MOUNTS AND STORAGE>>FORMAT SYSTEM
INSTALL THE ROM U WANT
WIPE DATA
WIPE CACHE
REBOOT
WAIT FOR 5-10 MINS AS IT TAKS TIME FOR FIRST BOOT
STILL NOT HAPPENING
THEN UR DOWNLOADED FILE MUST BE CORRUPTED SO DOWNLOAD THE FILE AGAIN
Click to expand...
Click to collapse
/system - ext4
/data - rfs
/cache - rfs
/db-data - unknown
I am using this apk:
CF-Root-ext4-v1.3-Addon.apk from Chainfire, but it is not made for my phone.
It has options for converting ext4 to rfs and rfs to ext4, but I am scared to do that. How can I manually convert from rfs to ext4? And, will my system even boot after doing that?
Possible solution...
Hi,
I have successfully flashed cm-10.1-20130914-NIGHTLY-beni.zip using ClockWorkMod 6.0.2.7. I initially had problems getting cm 10.1 to boot, it would just stop at the cyanogenmod logo. I got this ROM to work by first flashing ╰☆╮ [ROM][CM7.2] JellyBread v5.0 | SURPRISE! UPLOAD COMPLETE! ╰☆╮. then flashing the nightly.
Good luck:fingers-crossed:.
Regards,
jemail
I wouldn't recommend installing ICS on a Galaxy Fit. The phone doesn't really stand that much of the ROM itself.. I use a rom that'll look exactly alike it, that's basically it. But I tried Lenio vQuattro. it seemed pretty nice If you really need to then try this rom. And it wouldn't be such a bad idea tp update CWM, or try another Recovery.
AleksaSavic said:
/system - ext4
/data - rfs
/cache - rfs
/db-data - unknown
I am using this apk:
CF-Root-ext4-v1.3-Addon.apk from Chainfire, but it is not made for my phone.
It has options for converting ext4 to rfs and rfs to ext4, but I am scared to do that. How can I manually convert from rfs to ext4? And, will my system even boot after doing that?
Click to expand...
Click to collapse
Good question.
I really got no answere to that question. But as far as I know there are CMW for rfs and for ext4/ext3 filesystems.
If you use the wrong CMW than the phone will hang in a boot loop after flashing. That's what I had.
So I suggest you should try different CMW. For rfs and ext4. Better to flash them with Odin. I used Odin_Multi_Downloader_v4.42.exe.
As CWM try: http://forum.xda-developers.com/showpost.php?p=24719114&postcount=1387 or this CWM http://androidlegend.com/dl/beni_cwm-5_ext4_v2.tar
One of these should work for you.
Today when I started a Wipe with TWRP for flash a previous release of Paranoid Android because the new one have many bugs the wipe froze so I decided to format with SD Formatter and I was unable to do anything, I ever have "E:Unable to mount '/cache', E:Unable to mount '/data', E:Unable to mount '/system'"
I can't flash Rom, do a wipe it's always on a loop.
Thanks in Advance.
Asindur said:
Today when I started a Wipe with TWRP for flash a previous release of Paranoid Android because the new one have many bugs the wipe froze so I decided to format with SD Formatter and I was unable to do anything, I ever have "E:Unable to mount '/cache', E:Unable to mount '/data', E:Unable to mount '/system'"
I can't flash Rom, do a wipe it's always on a loop.
Thanks in Advance.
Click to expand...
Click to collapse
did you try to change recovery?
if not do it and try to wipe again
rzr86 said:
did you try to change recovery?
if not do it and try to wipe again
Click to expand...
Click to collapse
I tried but with 4EXT when I wipe data, do a factory reset I have the error: "E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p23"
Asindur said:
I tried but with 4EXT when I wipe data, do a factory reset I have the error: "E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p23"
Click to expand...
Click to collapse
I assume you were using TWRP 2.7? Then I can't give you much hope, since no one figured out yet how to repair that or if it's repairable at all.
Sajito said:
I assume you were using TWRP 2.7? Then I can't give you much hope, since no one figured out yet how to repair that or if it's repairable at all.
Click to expand...
Click to collapse
I used the TWRP 2.7.0.0 (not the last 2.7.1.x version) since it is available for HTC Sensation without problem, flashing many roms and do many wipe without problem.
I'l follow the TWRP thread then if a solution is possible..
Thank you for trying to help me.
Asindur said:
I used the TWRP 2.7.0.0 (not the last 2.7.1.x version) since it is available for HTC Sensation without problem, flashing many roms and do many wipe without problem.
I'l follow the TWRP thread then if a solution is possible..
Thank you for trying to help me.
Click to expand...
Click to collapse
Even the 2.7.0.0 is not without problems. There seems to be something broken which breaks the emmc.