Related
I just bought a second hands xoom , I really had bad luck because my device reboots itself automaticaly too often
it's about a MZ601 3G 32g. of course I can't find the seller back in my life ...
OS 3.2
build number H.6.5-17-3
Kernel 2.6.36.3
I don't know my xoom belongs to which country . I would like to root it
Becasue I've heard it might be helpfull .
I 'm really an newbie !
Can someone help me out ?
Best Regards
Kevin
The MZ601 is the MOTO/EU/umts_everest 3G: 3.2/H.6.5-17-1 GSM (means you can use any SIM card in your device, you can send and receive SMS)
You first need to install Android SDK, Here is a link to the ADB Tutorial.
http://www.xda-developers.com/android/adb-easy-tutorial/
Instructions assuming that you have successfully installed the Android SDk -
(solarnz)
1. Downloading the rooting-update zip file.
Download the zip file from here - http://goo.gl/Om9aP
Now place this on your external sdcard. - Sorry this is a requirement at the moment, like I said this is a bit rushed.
2. Flashing recovery
1. Download this Recovery image. http://bit.ly/iLRAIV (place this image in you SDK PlatformTools Folder, or which ever folder that contains your adb.exe)
2. If your device is locked, now is a good time to unlock it.
Code:
adb reboot bootloader
fastboot oem unlock
fastboot reboot
3. Flash recovery
Code:
adb reboot bootloader
fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img
Once you have verification on your device that this has been flashed, reboot your device by holding volume up + power.
Then 3 seconds after you see the Motorola logo, hit volume down. You should now see "Android Recovery" in the top left corner. Hit volume up to boot into recovery.
4. Flashing the Xoom-Universal-Root.zip file.
If you're in clockwork mod recovery you can continue (This recovery image will say it is clockwork mod) . If you're not looking at clockwork mod, then you need to repeat step 3 again.
In cwm, go into "install zip from sdcard" -> "Choose zip from sdcard", then select the Xoom-Universal-Root.zip file you downloaded.
Note: use the volume buttons to navigate and the power button to select
Reboot your device and then welcome to your rooted device!
AS Always, If This Was Helpful - Hit The Thanks!
Mjamocha said:
The MZ601 is the MOTO/EU/umts_everest 3G: 3.2/H.6.5-17-1 GSM (means you can use any SIM card in your device, you can send and receive SMS)
You first need to install Android SDK, Here is a link to the ADB Tutorial.
http://www.xda-developers.com/android/adb-easy-tutorial/
Instructions assuming that you have successfully installed the Android SDk -
(solarnz)
1. Downloading the rooting-update zip file.
Download the zip file from here - http://goo.gl/Om9aP
Now place this on your external sdcard. - Sorry this is a requirement at the moment, like I said this is a bit rushed.
2. Flashing recovery
1. Download this Recovery image. http://bit.ly/iLRAIV (place this image in you SDK PlatformTools Folder, or which ever folder that contains your adb.exe)
2. If your device is locked, now is a good time to unlock it.
Code:
adb reboot bootloader
fastboot oem unlock
fastboot reboot
3. Flash recovery
Code:
adb reboot bootloader
fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img
Once you have verification on your device that this has been flashed, reboot your device by holding volume up + power.
Then 3 seconds after you see the Motorola logo, hit volume down. You should now see "Android Recovery" in the top left corner. Hit volume up to boot into recovery.
4. Flashing the Xoom-Universal-Root.zip file.
If you're in clockwork mod recovery you can continue (This recovery image will say it is clockwork mod) . If you're not looking at clockwork mod, then you need to repeat step 3 again.
In cwm, go into "install zip from sdcard" -> "Choose zip from sdcard", then select the Xoom-Universal-Root.zip file you downloaded.
Note: use the volume buttons to navigate and the power button to select
Reboot your device and then welcome to your rooted device!
AS Always, If This Was Helpful - Hit The Thanks!
Click to expand...
Click to collapse
Thx so much I've root my device now .
I've one extra icon calls superuser ??? What can i do with it ?
What is now difference between a normal and an root device ?
What do I have more possiblilitie with rooted device ?
best regards
Kevin
Is this method workable in 4.0.3 or even freshly released 4.0.4?
@Kevin
superuser gives you access to your device settings and all files.
Install root explorer, and you can browse your system files, but be very careful.
With root you can customize you xoom.
To find out more on what root access can do for you, use google to search,
this would not be the place for that. After you get a better understanding of the
root process, browse this forum for Modifications and what not.
Now you gotta find a ROM that fits your taste. You can start here:
http://forum.xda-developers.com/showthread.php?t=1459641
Make sure you Flash the GAPPS directly after you flash your new ROM, then reboot. There are many ROMS to choose from in this forum. Find the one that fits your device and your needs. Welcome to the Dark Side my Friend!
---------- Post added at 10:48 PM ---------- Previous post was at 10:38 PM ----------
Ftnjohn said:
Is this method workable in 4.0.3 or even freshly released 4.0.4?
Click to expand...
Click to collapse
Yes you can root your device on stock 4.0.3 using this method. From there find a 4.0.4 ROM to your taste and flash it in CWM recovery. (If you are using a XOOM) I prefer the EOS 4.0.4 ROM which is their Nighty Builds. You can find the Xoom EOS Nightly ROMs that fits you device by searching the Forum.
If This Was Helpful Hit The Thanks!
Greeting from Vietnam, and sorry for my English
So, you dont want to wait the official-update from your carier/country, you got the OTA file from somewhere else, i'm gonna show you how to flash it, step by step with some stricks
This might works with other phones (I think), but in this guide we'll doing stuffs with HTC One Mini Android 4.2.2, flashing 4.3 OTA file
Before you do anything, i suggest you should do a nandroid backup, so you can get back your official rom any time. This is very important, please google for it
(For those who dont know: to do this, you'll need Unlock bootloader, then installing a custom recovery, i recommend TWRP instead of CWM, i've got error with cwm once -> Get into Recovery Mode -> Backup -> Save it to your computer)
I've googled and tried some other ways to upgrade the phone, but it was not work, like:
http://forum.xda-developers.com/showthread.php?t=2573479
Flash another 4.2.2 ROM -> [Settings > About > Software update] -> Download (only) the OTA file -> Flash the stock recovery file -> Then the phone will alert "the update is downloaded and ready"
Click to expand...
Click to collapse
Well, that's the idea. But right after your download is done (in your phone), it turns out error: "Variant system version", saying your phone has been modified, and end up by delete the OTA file
Let's get started
1. Requirement, Your phone must be:
Disabled Fast Boot:
Settings > Power > Untick Fast boot
Click to expand...
Click to collapse
Enabled USB Debugging:
Settings -> Developer Options -> USB Debugging
If you do not see "Developer Options", Go to Settings > About phone > Software > More > click on build number 7 times. This should enable that section
Click to expand...
Click to collapse
Unlocked Bootloader
Got the S-Off (For HTC phones, to: be able to write to /system)
Installed a custom recovery (recommend TWRP)
The guide can be found at here: http://forum.xda-developers.com/showthread.php?t=2365506
2. Download the OTA file
You can use any OTA files, like the EU, the international,...
For HTC One mini, 4.3 OTA file can use this: OTA_M4_UL_JB43_SENSE55_MR_HTC_Europe_2.12.401.1-1.32.401.2_release_342200vz5jcl35ysxswchv.zip by http://forum.xda-developers.com/showpost.php?p=48404636&postcount=1
3. Flash the firmware
Extract the OTA file you'll get firmware.zip
Make sure you already got the fastboot.exe, adb.exe, AdbWinApi.dll, ... files -> Move all these files + the firmware, the OTA file into a folder like: D:\htc
Reboot your phone into Fastboot USB Mode
Power off > Hold the both Volume Down key + Power key several seconds > Fast Boot
(Use the Volume key to change the selection, the Power key to chose/enter)
Click to expand...
Click to collapse
Make sure your phone is recognized by fastboot and adb, to check:
fastboot devices
- and:
adb devices
Click to expand...
Click to collapse
In case you got error "Device not found" with adb: turn the phone into Recovery Mode, it will fix this, so you can do adb push, shell...
Relock the bootloader, so we can flash the firmware update:
fastboot oem lock
The phone will reboot
Click to expand...
Click to collapse
Reboot to OEM update mode:
adb reboot oem-78
The phone will show the white-text HTC
Click to expand...
Click to collapse
Flash the firmware.zip:
fastboot flash zip firmware.zip
You'll see a green progressbar on the screen, if not: do the command again
Click to expand...
Click to collapse
Unlock Bootloader from http://htcdev.com, install the TWRP Recovery again
fastboot flash unlocktoken Unlock_Code.bin
fastboot flash recovery Twrp-2.6.0.0.img
You might need to get the new Unlock_Code.bin from htcdev
Click to expand...
Click to collapse
Now your phone is wiped, the /sdcard/ folder is empty
4. Make the OTA Flash-able file
Download the sample.zip file at here, we'll rename it to: OTA-4.3.zip, see How to make a flashable zip at here: http://forum.xda-developers.com/showthread.php?t=2163974
Open OTA-4.3.zip with winrar or 7zip, you'll see 2 folders: META-INF/ and system/ . We're going to put data from the OTA file into this zip file (Notice that the system/ folder is empty)
From the extracted OTA file that you've downloaded (OTA_M4_UL_JB43_SENSE55_MR_HTC_Europe_2.12.401.1-1.32.401.2_release_342200vz5jcl35ysxswchv.zip) copy 2 folders: system/ and patch/ into OTA-4.3.zip, just drag and drop them to opened OTA-4.3.zip (by winrar), hit OK in the winrar popup
--> You might wonder why we're doing this: Why we put 2 folders from OTA_M4_UL_JB43_SENSE55_MR_HTC_Europe_2.12.401.1-1.32.401.2_release_342200vz5jcl35ysxswchv.zip to the new, almost empty OTA-4.3.zip; instead of delete all other files, folders from OTA_M4_UL_JB43_SENSE55_MR_HTC_Europe_2.12.401.1-1.32.401.2_release_342200vz5jcl35ysxswchv.zip
--> The anwser is: i have no idea, the second way just doesn't work, i tried
5. Flash the OTA Flash-able file
Copy the OTA Flash-able file (OTA-4.3.zip) into your phone, your phone can not boot up now, so we'll use adb push command
adb push OTA-4.3.zip /sdcard/
It may takes few minutes
Click to expand...
Click to collapse
Now simply Install Zip from recovery:
Boot into Recovery Mode > Install Zip > select OTA-4.3.zip
Click to expand...
Click to collapse
Reboot the phone, if everything goes well, it's showing a progressbar of the Apps installing
You're now in 4.3
Thank you for this information but unfortunately it didnt work for me.
windovv said:
You'll see a green progressbar on the screen, if not: do the command again
Click to expand...
Click to collapse
I do see the green progress bar and it moves to the right but....
the Fastboot/DOS window finishes the flash firmware command successfully but the green progress bar shown on the phone does not go to the very end.....
so at this point I reboot back to fastboot on the phone and then unlock the bootloader then follow the rest of your instructions....
Everything appears to be successful but when i boot the phone it displays the boot animation to the end then just stays there....The phone never goes past the boot animation
Ive managed to restore a backup so thats not a problem but im really struggling to install the 4.3 and sense 5.5 update using the other method shown at the beginning of your post and your method here
anyhow, looks my radio, HBOOT etc is updated now ive flashed the "firmware.zip" from my OTA
Sirius-C said:
Thank you for this information but unfortunately it didnt work for me.
I do see the green progress bar and it moves to the right but....
the Fastboot/DOS window finishes the flash firmware command successfully but the green progress bar shown on the phone does not go to the very end.....
Click to expand...
Click to collapse
I think this step is just fine, i've noticed that the progress bar was near to the end, not full of the bar. If you not sure about this, you can do this step (run this command) twice:
fastboot flash zip firmware.zip
You'll see a green progressbar on the screen, if not: do the command again
Click to expand...
Click to collapse
Everything appears to be successful but when i boot the phone it displays the boot animation to the end then just stays there....The phone never goes past the boot animation
Click to expand...
Click to collapse
It seems like you have just flashed the firmware.zip only, the rest of the OTA file has not been flashed successfully yet. The phone is now wiped, so it can't boot up
Reboot the phone, if everything goes well, it's showing a progressbar of the Apps installing
Click to expand...
Click to collapse
Notice that in some cases, there's no progressbar showing, but the phone still configuring itself, and it can takes about 5-10 miniutes
so at this point I reboot back to fastboot on the phone and then unlock the bootloader then follow the rest of your instructions....
Click to expand...
Click to collapse
At this step, pls install a custom recovery ~> goto recovery mode ~> File Management, you'll see that there're system folders, like /sdcard/, check out if they're empty or not...
Bottom line: make sure firmware.zip has been flashed (do the flash command twice), verify step 4 and step 5 in #1
Hello,
Many thanks for your reply.
I did flash the OTA zip after modifying it. I can only think that I did not wait long enough after the boot animation, although i did wait approx 5 minutes or more.
Since posting here I have managed to install the OTA update but I used the alternative method here:
http://forum.xda-developers.com/showthread.php?t=2573479
I already had an unlocked bootloader and S-OFF so I skipped that part of the tutorial...
But I was unsuccessful the first time because I did not SUPERCID, as I read passed it..
Totally new guide! Simple step by step toutorial
It took us a while to get root on our devices. Hopefully we did it! Now we can enjoy benefits of having rooted device (like Xposed Modules etc). We have working TWRP recovery which allows us to backup your phone, flash SuperSU binaries, mods and custom ROMs (actually we are working on it). First: read whole post, then download necessary files and read it again. This guide will allow you to root your BLU Pure XL/Allview X2 Soul Xtreme/Gionee Elife E8/Condor Allure A100 and other clones I don't know.
If you don't know what is 'root' & TWRP nor understand the whole idea of rooting your phone this post (or even most of the XDA community) is not for you! Read everything carefully.
POSTING BUG REPORT/PROBLEM/ISSUE!
jaiwalla said:
HELP!!!
Where am I going wrong?!?!
Click to expand...
Click to collapse
I don't know where are you wrong...!
Maybe you say something else? Maybe give me some logcat?
I would help you if I knew the problem. As for now for me you don't have any problem. Your post is useless in this form.
You have to learn how to tell the error/problem/bug before you post anything on any forum.
If you want me to help you solving this situation send me private message or edit your post and tell the problem in the right form*, please.
Cheers,
bemolx
*Right form looks like:
What's the problem?
Did you check whole thread before posting?
If possible give me logcat/shown error
Make sure you read main post carefully
What you will need to get it working:
ADB and Fastboot drivers
SuperSU flashable zip archive
TWRP Recovery image
PC & your phone
BUT!
Code:
Your warranty is now void.
Everything you're doing with your devices is on your own!
We're not responsible for any damage on your phone!
If you don't understand what's root it's good time to STOP!
Now we're starting!
Look carefully on files you need (I've mentioned them above) and scroll down for download links. Download every file we need.
Note:
At the bottom of this post you'll find two versions of TWRP: 3.1.0-x and 2.8.6.0. Let me explain the difference:
TWRP v3.1.0-x: this version has been compiled from scratch & made by me. It is the newest available recovery version at the moment and without bugs. More info in the thread linked below.
TWRP v2.8.6.0: this version has been ported from Xiaomi Redmi Note 2 & made by @acheron1502. It's not the newest but working one. It has some little bugs. More info in the thread linked below.
I suggest you to download v3.1.0-x because it will get further support by me. But it is your choice now.
Setting up our workstation
I hope you have already downloaded everything we need.
On your Desktop create a new folder (for example "root").
Find package with ADB drivers, open it and extract to the "root" folder.
Now find TWRP image and place it also in our "root" folder. This image should look like this:
Code:
twrp-3.1.0-0-x2xtreme.img
or
Code:
BLU_PURE_XL_TWRP.img
Let's rename it like this (see below) to make our rooting process easier
Code:
twrp.img
Now we're setting up your phone
Open 'Settings' application. Scroll down to 'About phone'. Click about seven times on 'Build number'. You should see: "You are now developer".
Now find 'Developer options', then 'Enable USB Debugging' and simply enable it.
Connect your phone to the PC. On PC: find SuperSU.zip and copy it on your phone.
OMG!!! Flashing!!!
Okay... That's the most important step.
Turn off your phone. Press 'power' & 'vol +' together. This key combo should boot up your phone into stock recovery mode.
Scroll down using 'vol -' to 'Reboot bootloader' and confirm pressing 'power'. This will boot your phone into Fastboot mode.
On PC: open "root" folder. Open Command Prompt here (LShift + right mouse click -> 'open cmd here')
In the Command Prompt type:
Code:
fastboot flash recovery twrp.img
This command will flash TWRP recovery on you phone.
After flashing process is done reboot you phone into TWRP by pressing 'vol +' and 'power'. When you see bootlogo get your finger from the 'power' button. You will see TWRP logo. You can unplug USB cable now.
We're almost here!
Now you should see TWRP main page same like in the screenshots I've attached to this post.
We must flash SuperSU binaries to get rooted phone. To do this press 'Install' button.
You should see list of files/folders on your phone. Navigate to the SU.zip and choose it by clicking on it.
TWRP will ask you for permission to flash that zip package. To allow it to do so swipe to the right slider on the bottom of the screen. Now SuperSU is installing.
After installation process is done press 'Reboot system now' button. Your device will reboot into your system.
Done!!!
And there you go! Your device should be now rooted with TWRP recovery installed. Check if your phone is rooted correctly by installing ROOT Checker. To make rebooting process much easier and faster you can download Quick Reboot.
Xposed Modules
There's an option to install Xposed Modules as I mentioned at the top of this post. Not every module is working but you can try it and let us know what's working.
To get it working you need:
Xposed Installer Alpha App (allows you to download and manage modules)
Xposed SDK zip (the most important thing)
Original thread with those files is linked below.
Note:
It's important what version of SDK you are downloading. Our device has 64-bit ARM MediaTek chipset so it is arm64 and it's running lollipop 5.1 ROM which equals sdk22. By that meaning the SDK zip you should download looks pretty much the same like this:
Code:
xposed-v80-sdk22-arm64.zip
Installing
Place both files on your phone's storage and reboot to recovery. Press 'Install' and navigate to sdk.zip. Choose it, confirm installation - when it's done reboot into system. Now use any file browser and find XposedInstaller.apk and install it.
Now you can download any module you want. Further instructions in post linked below.
How to unroot
Most of you would like to flash stock OTA etc.
To do this you have to have stock recovery installed.
First open SuperSU app, then scroll down and look for 'Clear/unroot' option. Choose it and follow on-screen instructions.
Then download stock recovery image (downloads for Elife E8 and Allure A100 will be available when someone provide me a link). Place it the 'root' folder (or just in the same directory with fastboot drivers etc.). Rename downloaded file into recovery.img.
Method 1 - using Fastboot
Reboot phone into bootloader mode. Open terminal in the 'root' folder and type
Code:
fastboot flash recovery recovery.img
Now reboot into system by pressing power button for a while.
Method 2 - using TWRP
Copy downloaded recovery onto your phone's storage. Reboot phone into recovery mode. Press 'Install', then change from installing zips to installing imgs (bottom right button). Navigate to downloaded recovery file and choose it. Confirm installation. After that reboot into system.
You should be now unrooted and able to flash OTA.
Downloads:
ADB & Fastboot drivers: link
TWRP Recovery: TWRP v3.1.0-0 (recomended) or TWRP v2.8.6.0 (unofficial)
SuperSU binaries by @Chainfire: link
Stock recovery: Pure XL & X2 Xtreme (extract .zip before renaming/installing)
TWRP Materialised - Dark / Light / Play
Xposed Modules
Special thanks go to the awesome team!
@FuMMoD
@acheron1502
@dexterxx
@spit85
Thank you guys. Without you it wouldn't be possible!
ENJOY!
Hey @bemolx ,
Since your thread is more of a HOW TO root, would it be OK if you move this into GENERAL and field all the rooting process questions there?
I will start a new Dev Thread for TWRP and all TWRP related development issues.
You can then use that new thread for all your download links.
EDIT:
Please use this link for TWRP in your guide.
bemolx said:
My friends and me figured out how to get root on our phones. By the way @acheron1502 made TWRP recovery which allows us flash Super SU 2.46 (Stable). Also you can flash Xposed Modules as you want.
HOW TO INSTALL:
Connect phone to your PC
Make sure you have adb and fastboot drivers installed
Download TWRP from this post
Download Super SU
Copy SU.zip to your phone's storage
Reboot phone into fastboot/bootloader mode
Flash recovery using: fastboot flash "downloadedrecoveryfilename"
Reboot to TWRP by pressing and holding Vol+ & power buttons (still in fastboot mode!)
In TWRP flash SU.zip, then reboot
What doesn't work:
- no adb in recovery
- you tell us
And there you go! Your device should be now rooted with TWRP recovery installed. Check if your phone is rooted correctly by installing ROOT Checker.
BUT!
Everything you're doing with your devices is on your own! We're not responsible for any damage on your phone!
Special thanks go to the awesome team!
@FuMMoD
@acheron1502
@dexterxx
@spit85
Thank you guys. Without you it wouldn't be possible!
ENJOY!
Click to expand...
Click to collapse
Do I have to install a particular driver for my Blu Pure XL for adb to recognize the phone is connected? Please provide a link to the driver you used. Also, please provide a link to the adb / fastboot you recommend. Thank you and great work to you all!!
acheron1502 said:
Hey @bemolx ,
Since your thread is more of a HOW TO root, would it be OK if you move this into GENERAL and field all the rooting process questions there?
I will start a new Dev Thread for TWRP and all TWRP related development issues.
You can then use that new thread for all your download links.
Click to expand...
Click to collapse
Okay, no problem
mhajii210 said:
Do I have to install a particular driver for my Blu Pure XL for adb to recognize the phone is connected? Please provide a link to the driver you used. Also, please provide a link to the adb / fastboot you recommend. Thank you and great work to you all!!
Click to expand...
Click to collapse
Just take a look at Google's development page - there are drivers needed to get it working. Nothing else
bemolx said:
Okay, no problem
Click to expand...
Click to collapse
Once it's moved, see of you can get it PINNED to top so everyone can find it easily.
It states unknown partition 'BLU_PURE_XL_TWRP' "error: cannot determine image filename for 'BLU_PURE_XL_TWRP' what can I do? Thanks
fastboot flash recovery filename.img
@bemolx, fix it
error: cannot load 'BLU_PURE_XL_TWRP' please help. Thanks
---------- Post added at 01:12 PM ---------- Previous post was at 01:04 PM ----------
dexterxx said:
fastboot flash recovery filename.img
@bemolx, fix it
Click to expand...
Click to collapse
Got it thanks a mil
bemolx said:
My friends and me figured out how to get root on our phones. By the way @acheron1502 made TWRP recovery which allows us flash Super SU 2.46 (Stable). Also you can flash Xposed Modules as you want.
HOW TO INSTALL:
Connect phone to your PC
Make sure you have adb and fastboot drivers installed
Download TWRP from this post
Download Super SU
Copy SU.zip to your phone's storage
Reboot phone into fastboot/bootloader mode
Flash recovery using: fastboot flash "downloadedrecoveryfilename"
Reboot to TWRP by pressing and holding Vol+ & power buttons (still in fastboot mode!)
In TWRP flash SU.zip, then reboot
What doesn't work:
- no adb in recovery
- you tell us
And there you go! Your device should be now rooted with TWRP recovery installed. Check if your phone is rooted correctly by installing ROOT Checker.
BUT!
Everything you're doing with your devices is on your own! We're not responsible for any damage on your phone!
Special thanks go to the awesome team!
@FuMMoD
@acheron1502
@dexterxx
@spit85
Thank you guys. Without you it wouldn't be possible!
ENJOY!
Click to expand...
Click to collapse
What about the Ono U1? It's an inexpensive phone with high end specs thanks again http://forum-lw-3.xda-cdn.com/images/smilies/wink.gif
Swarai said:
What about the Ono U1? It's an inexpensive phone with high end specs thanks again http://forum-lw-3.xda-cdn.com/images/smilies/wink.gif
Click to expand...
Click to collapse
It *might* work based on specs I saw on u1labs.com ...
Can you post the values in your /proc/partinfo so I can compare with ours?
acheron1502 said:
It *might* work based on specs I saw on u1labs.com ...
Can you post the values in your /proc/partinfo so I can compare with ours?
Click to expand...
Click to collapse
The specs haven't been updated yet, but the phone should be released soon along with the kernel source.
Swarai said:
The specs haven't been updated yet, but the phone should be released soon along with the kernel source.
Click to expand...
Click to collapse
Let's keep the development thread about this phone (Blu Pure XL) and other phones with the exact same base maker/model (ie. Gionee E8, Allview x2 Extreme). If you are asking about gaining root for a different phone and need some Mind-share from this group of people due to the other phone having a similar SOC, the best way is to open a new thread in the Q&A Section or the General Section, but I think you should wait until the phone is released first IMHO.
bemolx said:
7. Flash recovery using: fastboot flash "downloadedrecoveryfilename"
Click to expand...
Click to collapse
This should be fastboot flash recovery BLU_PURE_XL_TWRP.img
Also ... I requested this thread be moved to General and be Pinned for easy finding for anyone that has this phone
Guys,
1) THANKS for GREAT work!
2) Please provide more CLEAR / ACCURATE details on how to do this, because NOOBs (including myself) get very confused.
a) Link to adb / fastboot drives. Saying "they are in Google development section means nothing"
b) How do I "Reboot phone into fastboot/bootloader mode"??
This would help so many people root without bricking the phone.
Thank you once again!
levchikb said:
Guys,
1) THANKS for GREAT work!
2) Please provide more CLEAR / ACCURATE details on how to do this, because NOOBs (including myself) get very confused.
a) Link to adb / fastboot drives. Saying "they are in Google development section means nothing"
b) How do I "Reboot phone into fastboot/bootloader mode"??
This would help so many people root without bricking the phone.
Thank you once again!
Click to expand...
Click to collapse
Thanks for reply! Once I get a little more time I'll re-write this "how to".
Cheers
Everything should be now clear. I've added links for drivers etc. Also i've re-wrote it for better understanding
Sent from Nexus 5
I'm having issues with fastboot. It says it's blocked for security. Is there something required that isn't normally on android phones to get the fastboot method to actually allow me to enter fastboot? At the beginning was just going to recov ery and putting reboot into fastboot.
alaiwy said:
I'm having issues with fastboot. It says it's blocked for security. Is there something required that isn't normally on android phones to get the fastboot method to actually allow me to enter fastboot? At the beginning was just going to recov ery and putting reboot into fastboot.
Click to expand...
Click to collapse
Try to reboot manually to recovery, then you should see option 'reboot bootloader'. After choosing it follow my instructions
any1 have stock rom to reflash full rom , pure xl ?
Hello,
I got a Xperia XZS SO-03J (Japan Docomo Variant). Anybody got any ideas to root this device and any custom roms. Already searched the forum but no avail. Thank you for your help.
Japanese cellular version usually unable to unlock bootloader.but still some phones can unlock. if you have twrp ,you can install some rooted ROMs modified from official ROM.(btw you have to find a ROM can install without unlock bootloader)
sinkoo1979 said:
Hello,
I got a Xperia XZS SO-03J (Japan Docomo Variant). Anybody got any ideas to root this device and any custom roms. Already searched the forum but no avail. Thank you for your help.
Click to expand...
Click to collapse
if you have docomo ubl yes you can patch kernel manual , because it's different from Au,Global,Softbank
I've tried with x compact docomo ubl yes
I think first of all need to check whether the bootloader is unlockable or not
if you can UNLOCK the Japanese Xzs then
you can use this TWRP
https://dl.twrp.me/kagura/twrp-3.2.3-0-kagura.img.html
there is a depate that you can cross flash XZ's Android 6 to extract DRM keys! but i am not going to go that, as soon as you UNLOCK you bootload, TA partition will be GONE..
what is your build number?
download your build from FLASHTOOL---> Xperfirm and send me KERNEL.sin and i will send you the modded kernel
rest PROCESS you can Read (carefully) at
https://forum.xda-developers.com/xperia-xz/how-to/rooted-kernels-f8332-41-3-2-588-0-t3748987
its for XZ but applies to XZs too!
YasuHamed said:
if you can UNLOCK the Japanese Xzs then
you can use this TWRP
https://dl.twrp.me/kagura/twrp-3.2.3-0-kagura.img.html
there is a depate that you can cross flash XZ's Android 6 to extract DRM keys! but i am not going to go that, as soon as you UNLOCK you bootload, TA partition will be GONE..
what is your build number?
download your build from FLASHTOOL---> Xperfirm and send me KERNEL.sin and i will send you the modded kernel
rest PROCESS you can Read (carefully) at
https://forum.xda-developers.com/xperia-xz/how-to/rooted-kernels-f8332-41-3-2-588-0-t3748987
its for XZ but applies to XZs too!
Click to expand...
Click to collapse
YusaHamed this is my kernel https://drive.google.com/open?id=1mGpQOcWcuCfwp4U0wrt29HzERH5SQrTr
i need your help to mod this kernel, and then this is my build number 41.3.B.1.140
:fingers-crossed:
Amirai17 said:
YusaHamed this is my kernel https://drive.google.com/open?id=1mGpQOcWcuCfwp4U0wrt29HzERH5SQrTr
i need your help to mod this kernel, and then this is my build number 41.3.B.1.140
:fingers-crossed:
Click to expand...
Click to collapse
requesting you please
send me also these three files
/system/vendor/etc/fstab.qcom
/system/vendor/etc/init/hw/init.qcom.rc
/system/vendor/etc/init/hw/init.target.rc
there will be system.sin in that ftf,
convert it using FLASHTOOL > tool > sineditor > selected system.sin and click extract data, it will make 6gb file SYSTEM.ext4, open it with 7zip and locate the above three file and add in the goodle drive PLZ
Amirai17 said:
YusaHamed this is my kernel https://drive.google.com/open?id=1mGpQOcWcuCfwp4U0wrt29HzERH5SQrTr
i need your help to mod this kernel, and then this is my build number 41.3.B.1.140
:fingers-crossed:
Click to expand...
Click to collapse
FROM THIS LINK
https://mega.nz/#F!eRh0TSiQ!j6FNfTsHpkw8DECUNRF5QQ
kindly copy into SDCARD of your mobile the following files
1. magisk17.2
2. drmFix.zip
3. NightLight.zip (optional)
4. magisk MANAGER 6.0.1.apk
and
then FLASH twrp to your XZs by Connecting in to Fastboot mode (BLUE LED) and opening "MINIMAL ADB AND FASBOOT"
you can download it from here https://forum.xda-developers.com/showthread.php?t=2317790
Code:
in adb type
FASTBOOT DEVICE (then enter)
<it will show some hex code, confirming your device is in fastboot mode connected>
now type
FASTBOOT FLASH RECOVERY <and drag twrp image file from DESKTOP to your black cmd window... it will come as path>
press enter and flashing will be done
unplug device and press and hold volume down and power until you see twrp...
- keep system read only
- goto backup
- backup boot and swipe right, it will make boot backup in your sd card (it always recommended
- now goto install
- click flash IMAGE FILE button at bottom
- select KERNEL_CLEAN_41.3.B.1.140_XZs_SO-03J.img
- it will ask where to flash ... CHECK BOX "BOOT" ( BE CAREFUL )
- twrp will flash boot with provided kernel
- now click button FLASH ZIP file & flash DRMFIX.zip
- now flash Magisk17.x.zip
- now flash NIGHTLIGHT.zip (optional)
- clear cache
- poweroff and while powering off, select DONOT INSTALL TWRP.
press power on and let device boot, first boot may goto bootloops.
the device will now boot and check for MAGISK app in app drawer, if you can find it, GOOD, otherwise install MAGISK MANAGER 6.0.1.apk from your sd card
install rootchecker from playstore and check for root access
done
YasuHamed said:
FROM THIS LINK
https://mega.nz/#F!eRh0TSiQ!j6FNfTsHpkw8DECUNRF5QQ
kindly copy into SDCARD of your mobile the following files
1. magisk17.2
2. drmFix.zip
3. NightLight.zip (optional)
4. magisk MANAGER 6.0.1.apk
and
then FLASH twrp to your XZs by Connecting in to Fastboot mode (BLUE LED) and opening "MINIMAL ADB AND FASBOOT"
you can download it from here https://forum.xda-developers.com/showthread.php?t=2317790
Code:
in adb type
FASTBOOT DEVICE (then enter)
<it will show some hex code, confirming your device is in fastboot mode connected>
now type
FASTBOOT FLASH RECOVERY <and drag twrp image file from DESKTOP to your black cmd window... it will come as path>
press enter and flashing will be done
unplug device and press and hold volume down and power until you see twrp...
- keep system read only
- goto backup
- backup boot and swipe right, it will make boot backup in your sd card (it always recommended
- now goto install
- click flash IMAGE FILE button at bottom
- select KERNEL_CLEAN_41.3.B.1.140_XZs_SO-03J.img
- it will ask where to flash ... CHECK BOX "BOOT" ( BE CAREFUL )
- twrp will flash boot with provided kernel
- now click button FLASH ZIP file & flash DRMFIX.zip
- now flash Magisk17.x.zip
- now flash NIGHTLIGHT.zip (optional)
- clear cache
- poweroff and while powering off, select DONOT INSTALL TWRP.
press power on and let device boot, first boot may goto bootloops.
the device will now boot and check for MAGISK app in app drawer, if you can find it, GOOD, otherwise install MAGISK MANAGER 6.0.1.apk from your sd card
install rootchecker from playstore and check for root access
done
Click to expand...
Click to collapse
Thanks for the kernel mod, you mod it so fast that's so amazing
Anyway i will try it tomorrow, pray fo the kernel got stable
Before i use this kernel on this thread https://forum.xda-developers.com/xzs/development/root-xperia-xzs-t3726911
And i got unstable performance. Trying use kernel auditor not effect it and i decide to flash it back to normal again.
Amirai17 said:
Thanks for the kernel mod, you mod it so fast that's so amazing
Anyway i will try it tomorrow, pray fo the kernel got stable
Before i use this kernel on this thread https://forum.xda-developers.com/xzs/development/root-xperia-xzs-t3726911
And i got unstable performance. Trying use kernel auditor not effect it and i decide to flash it back to normal again.
Click to expand...
Click to collapse
I dont know about that thread
Seems like different process
Anways plz do try this and let me know
YasuHamed said:
I dont know about that thread
Seems like different process
Anways plz do try this and let me know
Click to expand...
Click to collapse
Sorry i take a long time to try it,
But i just try it n i can root my phone
for performance, not yet test it
no any trouble on process, but
i want to ask, what the use of nightlight?
Amirai17 said:
Sorry i take a long time to try it,
But i just try it n i can root my phone
for performance, not yet test it
no any trouble on process, but
i want to ask, what the use of nightlight?
Click to expand...
Click to collapse
This is a good news! , good to know that you were able to Root it.
i am sure you will find good performance.
nighlight makes your screen TINT different (reduces blue) which makes it easier on eyes while you browsing in night or from bed. blue light hurts eyes and brain and increases sleeplessness.
a shortcut toggle button next to FLASHLIGHT will appear (if arent already in your build) and display setting will have NIGHLIGHT FEATURE ENABLED- you can control the INTENSITY of this filter according to your needs
YasuHamed said:
FROM THIS LINK
https://mega.nz/#F!eRh0TSiQ!j6FNfTsHpkw8DECUNRF5QQ
kindly copy into SDCARD of your mobile the following files
1. magisk17.2
2. drmFix.zip
3. NightLight.zip (optional)
4. magisk MANAGER 6.0.1.apk
and
then FLASH twrp to your XZs by Connecting in to Fastboot mode (BLUE LED) and opening "MINIMAL ADB AND FASBOOT"
you can download it from here https://forum.xda-developers.com/showthread.php?t=2317790
Code:
in adb type
FASTBOOT DEVICE (then enter)
<it will show some hex code, confirming your device is in fastboot mode connected>
now type
FASTBOOT FLASH RECOVERY <and drag twrp image file from DESKTOP to your black cmd window... it will come as path>
press enter and flashing will be done
unplug device and press and hold volume down and power until you see twrp...
- keep system read only
- goto backup
- backup boot and swipe right, it will make boot backup in your sd card (it always recommended
- now goto install
- click flash IMAGE FILE button at bottom
- select KERNEL_CLEAN_41.3.B.1.140_XZs_SO-03J.img
- it will ask where to flash ... CHECK BOX "BOOT" ( BE CAREFUL )
- twrp will flash boot with provided kernel
- now click button FLASH ZIP file & flash DRMFIX.zip
- now flash Magisk17.x.zip
- now flash NIGHTLIGHT.zip (optional)
- clear cache
- poweroff and while powering off, select DONOT INSTALL TWRP.
press power on and let device boot, first boot may goto bootloops.
the device will now boot and check for MAGISK app in app drawer, if you can find it, GOOD, otherwise install MAGISK MANAGER 6.0.1.apk from your sd card
install rootchecker from playstore and check for root access
done
Click to expand...
Click to collapse
I have the same phone xzs docomo so-03j on the same build, is it ok if i flash this too or will it brick my phone? thank you
---------- Post added at 05:14 PM ---------- Previous post was at 05:10 PM ----------
Amirai17 said:
Sorry i take a long time to try it,
But i just try it n i can root my phone
for performance, not yet test it
no any trouble on process, but
i want to ask, what the use of nightlight?
Click to expand...
Click to collapse
How has it been? the performance? mine heats up akot when gaming and is even slower than my Softbank xperia xz I would like to root mine as well if it is good and if it is possible
other build number
YasuHamed said:
FROM THIS LINK
https://mega.nz/#F!eRh0TSiQ!j6FNfTsHpkw8DECUNRF5QQ
kindly copy into SDCARD of your mobile the following files
1. magisk17.2
2. drmFix.zip
3. NightLight.zip (optional)
4. magisk MANAGER 6.0.1.apk
and
then FLASH twrp to your XZs by Connecting in to Fastboot mode (BLUE LED) and opening "MINIMAL ADB AND FASBOOT"
you can download it from here https://forum.xda-developers.com/showthread.php?t=2317790
Code:
in adb type
FASTBOOT DEVICE (then enter)
<it will show some hex code, confirming your device is in fastboot mode connected>
now type
FASTBOOT FLASH RECOVERY <and drag twrp image file from DESKTOP to your black cmd window... it will come as path>
press enter and flashing will be done
unplug device and press and hold volume down and power until you see twrp...
- keep system read only
- goto backup
- backup boot and swipe right, it will make boot backup in your sd card (it always recommended
- now goto install
- click flash IMAGE FILE button at bottom
- select KERNEL_CLEAN_41.3.B.1.140_XZs_SO-03J.img
- it will ask where to flash ... CHECK BOX "BOOT" ( BE CAREFUL )
- twrp will flash boot with provided kernel
- now click button FLASH ZIP file & flash DRMFIX.zip
- now flash Magisk17.x.zip
- now flash NIGHTLIGHT.zip (optional)
- clear cache
- poweroff and while powering off, select DONOT INSTALL TWRP.
press power on and let device boot, first boot may goto bootloops.
the device will now boot and check for MAGISK app in app drawer, if you can find it, GOOD, otherwise install MAGISK MANAGER 6.0.1.apk from your sd card
install rootchecker from playstore and check for root access
done
Click to expand...
Click to collapse
why with different build number?
i have build number 41.3.B.1.113
or can i flash to global rom and what the side effect?
plz tell me how you root your xz. my xz 601so with allowed yes
Amirai17 said:
Sorry i take a long time to try it,
But i just try it n i can root my phone
for performance, not yet test it
no any trouble on process, but
i want to ask, what the use of nightlight?
Click to expand...
Click to collapse
Temporary root is now possible on the Xperia so-03j, I personally tested a few minutes ago.
Check this comment for instructions. And here instructions to create a launcher.
YasuHamed said:
FROM THIS LINK
https://mega.nz/#F!eRh0TSiQ!j6FNfTsHpkw8DECUNRF5QQ
kindly copy into SDCARD of your mobile the following files
1. magisk17.2
2. drmFix.zip
3. NightLight.zip (optional)
4. magisk MANAGER 6.0.1.apk
and
then FLASH twrp to your XZs by Connecting in to Fastboot mode (BLUE LED) and opening "MINIMAL ADB AND FASBOOT"
you can download it from here https://forum.xda-developers.com/showthread.php?t=2317790
Code:
in adb type
FASTBOOT DEVICE (then enter)
<it will show some hex code, confirming your device is in fastboot mode connected>
now type
FASTBOOT FLASH RECOVERY <and drag twrp image file from DESKTOP to your black cmd window... it will come as path>
press enter and flashing will be done
unplug device and press and hold volume down and power until you see twrp...
- keep system read only
- goto backup
- backup boot and swipe right, it will make boot backup in your sd card (it always recommended
- now goto install
- click flash IMAGE FILE button at bottom
- select KERNEL_CLEAN_41.3.B.1.140_XZs_SO-03J.img
- it will ask where to flash ... CHECK BOX "BOOT" ( BE CAREFUL )
- twrp will flash boot with provided kernel
- now click button FLASH ZIP file & flash DRMFIX.zip
- now flash Magisk17.x.zip
- now flash NIGHTLIGHT.zip (optional)
- clear cache
- poweroff and while powering off, select DONOT INSTALL TWRP.
press power on and let device boot, first boot may goto bootloops.
the device will now boot and check for MAGISK app in app drawer, if you can find it, GOOD, otherwise install MAGISK MANAGER 6.0.1.apk from your sd card
install rootchecker from playstore and check for root access
done
Click to expand...
Click to collapse
can i root my Xperia XZs AU version with these files that are attached in this post, or do i need different files ?
thank you @YasuHamed
5crypt said:
can i root my Xperia XZs AU version with these files that are attached in this post, or do i need different files ?
thank you @YasuHamed
Click to expand...
Click to collapse
Those files seem appropriate for stock rom release 41.3.B.1.140., so don't try unless you're running that specific version (quite outdated if you ask me).
But first make sure your bootloader can be unlocked. If that's the case, you may want to install a recent rom with root support, or check the guides for rooting stock rom. Be aware that with unofficial roms you might lose camera quality or have no cam support at all.
If you're stuck with an unlockable bootloader (like myself) your choices are much more limited. My current approach is having latest stock, disable bloatware apps, and use temporary root when needed.
thank you @dinosaur99 for your quick response, i got the one that cannot be unlocked, so i'm using the temp root method, but do you know how to gain temp root access without using adb (laptop or computer), and can i automate the temp root every after reboot ?
again thank you for your response, and looking forward from you
5crypt said:
thank you @dinosaur99 for your quick response, i got the one that cannot be unlocked, so i'm using the temp root method, but do you know how to gain temp root access without using adb (laptop or computer), and can i automate the temp root every after reboot ?
again thank you for your response, and looking forward from you
Click to expand...
Click to collapse
Good question! I wanted to create a launcher too!
So I just followed these instructions and it works fine. First you need to perform the following commands from computer (have a copy of the exploit file in working directory):
Bash:
adb push su98-memory-kallsyms /data/local/tmp/
adb shell
# Run this from inside the shell
chmod +x /data/local/tmp/su98-memory-kallsyms
/data/local/tmp/su98-memory-kallsyms
chcon u:object_r:system_file:s0 /data/local/tmp/su98-memory-kallsyms
Now reboot the phone, and the file /data/local/tmp/su98-memory-kallsyms should still be there. On your favourite console app, create a new terminal launcher/profile/whatever it's called and name it "Root terminal", then make it so it runs this command on shell login:
Bash:
/data/local/tmp/su98-memory-kallsyms
Note there's a trailing <Enter> key at the end of the command. I use Connectbot and it was necessary.
Cheers!
Edit:
By the way, the last line would be the equivalent to "sudo bash" in a computer. That means you can write a script with the root commands to be executed upon reboot. Example launcher:
Bash:
/data/local/tmp/su98-memory-kallsyms /data/local/tmp/my-script
I've done deep search about this concern for 2 hours but I've only seen twrp for M5 mini but with different Mediatek. I have MT6580 so some forums doesnt give me any answers so I need help to you guys if you have twrp for this type of Mediatek. Need to flash a rom to my phone~ Thanks in advance
Upload your stock recovery, we'll see if something can be done
I'm new so i don't know how to extract my stock recovery
CSAPawn said:
I'm new so i don't know how to extract my stock recovery
Click to expand...
Click to collapse
Then you download your stock firmware just extract it with any unzipper app like winrar or 7zip, then zip it and upload it here or it´s not able upload it to some cloud host like Google Drive
This is my stock firmware Lollipop
http://www.mediafire.com/file/wd5a4xqftiao7t6/Gionee_M5_Mini_MT6580_5.1.zip
I have Marshmallow update right now so here's the update file https://mega.nz/#!jQdWkYiB
CSAPawn said:
I have Marshmallow update right now so here's the update file https://mega.nz/#!jQdWkYiB
Click to expand...
Click to collapse
Download it, you might need it in the future, and inside the zip you will see a file called recovery, extract it and upload me here, I need this file to try to made a custom recovery for your device
Okay! Le me just download it~
https://drive.google.com/file/d/1i57tu6g-qLWFHL8JknfrHJqh1SsYDk_X/view here's the recovery of Marshmallow update
CSAPawn said:
https://drive.google.com/file/d/1i57tu6g-qLWFHL8JknfrHJqh1SsYDk_X/view here's the recovery of Marshmallow update
Click to expand...
Click to collapse
This is not your recovery, there must to have other recovery with image extension, guide you for the size, atleast a 10 MB
That is the only one with the name "recovery" in the zip file, i think i should find it in Lollipop stock rom. Gonna download it first~
CSAPawn said:
That is the only one with the name "recovery" in the zip file, i think i should find it in Lollipop stock rom. Gonna download it first~
Click to expand...
Click to collapse
Show me a screen of your zip open please to see the files.
What is the size of your recovery cause the uploaded is just some kbs
And what is the size of the boot image
SubwayChamp said:
Show me a screen of your zip open please to see the files.
What is the size of your recovery cause the uploaded is just some kbs
And what is the size of the boot image
Click to expand...
Click to collapse
https://ibb.co/cYWrsy here's the main directory of the zip
https://ibb.co/nMLqkJ and recovery file found on "sig" folder on main directory
Boot Image file size is 7.48 MB
I'm now downloading the Lollipop Stock Rom because that Marshmallow Rom is just an update which might be incomplete in some files~
https://drive.google.com/open?id=1wX5N5_NzKhbg4gWG2RIQ6Ta5MzHYK0W1
Here's the link of 2 files with recovery file name in .img file format
https://ibb.co/gGCvKd
Here's the full content of the Lollipop Stock Rom
CSAPawn said:
https://drive.google.com/open?id=1wX5N5_NzKhbg4gWG2RIQ6Ta5MzHYK0W1
Here's the link of 2 files with recovery file name in .img file format
https://ibb.co/gGCvKd
Here's the full content of the Lollipop Stock Rom
Click to expand...
Click to collapse
Ok, now you need to unlock bootloader. Follow the next steps:
Download to your pc the latest version of adb installer from here https://androidmtk.com/download-15-seconds-adb-installer , in the process just type "y" to all questions. After it finishes unpack this adb folder and put it in your main drive, by i.e. c: drive
View attachment adb.zip
Install all the drivers for your device.
1- In your device go to settings/about device/build number and tap 7 times, then go back to settings and you will see developer options into settings, enable USB debugging and enable OEM unlock if it´s present,
2- Extract from the zip twrp.img and put it inside adb folder
View attachment twrp-wl2.zip
3- Connect your device power on to pc and run the file "run-adb" as administrator with right mouse button
4- Type adb reboot bootloader and you will be prompted in display of your device, tap on the small box "always allow" and tap on "ok"
5- Now device will reboot to fastboot mode, type fastboot devices you have to see a serial of your device in the window, then if it´s detected type now fastboot oem unlock you have to confirm wiith the button of your device, pay attention.
6- Then you will go to flash twrp onto your device, for this type fastboot flash recovery twrp.img and then to reboot to recovery type fastboot boot twrp.img is important that here device reboots to recovery before to reboot to system.
7- In twrp you will be prompted to allow modifications, just swipe to confirm.
If you also want to root your device download the latest version of Magisk in zip format to flash it through twrp.
When al finishes if sucessful you have to format data (all your data will gone) in order to can reboot to system again due to encryption, anyway unlocking bootloader most probably you will lose it before.
Read carefully and do steps one by one, don´t jump nor ignore nothing of the indicated to avoid any damage. If you are not sure in some steps just stops process and ask before.
I´m not sure you that this twrp matches for your device cause I can´t try before and but will see that.
Don´t forget to provide screenies of the process if something goes wrong to can clear.
OMG Thank you very much for this guide, I'll follow the steps later and post a pic after~
SubwayChamp said:
Ok, now you need to unlock bootloader. Follow the next steps:
Download to your pc the latest version of adb installer from here https://androidmtk.com/download-15-seconds-adb-installer , in the process just type "y" to all questions. After it finishes unpack this adb folder and put it in your main drive, by i.e. c: drive
View attachment 4530163
Install all the drivers for your device.
1- In your device go to settings/about device/build number and tap 7 times, then go back to settings and you will see developer options into settings, enable USB debugging and enable OEM unlock if it´s present,
2- Extract from the zip twrp.img and put it inside adb folder
View attachment 4530170
3- Connect your device power on to pc and run the file "run-adb" as administrator with right mouse button
4- Type adb reboot bootloader and you will be prompted in display of your device, tap on the small box "always allow" and tap on "ok"
5- Now device will reboot to fastboot mode, type fastboot devices you have to see a serial of your device in the window, then if it´s detected type now fastboot oem unlock you have to confirm wiith the button of your device, pay attention.
6- Then you will go to flash twrp onto your device, for this type fastboot flash recovery twrp.img and then to reboot to recovery type fastboot boot twrp.img is important that here device reboots to recovery before to reboot to system.
7- In twrp you will be prompted to allow modifications, just swipe to confirm.
If you also want to root your device download the latest version of Magisk in zip format to flash it through twrp.
When al finishes if sucessful you have to format data (all your data will gone) in order to can reboot to system again due to encryption, anyway unlocking bootloader most probably you will lose it before.
Read carefully and do steps one by one, don´t jump nor ignore nothing of the indicated to avoid any damage. If you are not sure in some steps just stops process and ask before.
I´m not sure you that this twrp matches for your device cause I can´t try before and but will see that.
Don´t forget to provide screenies of the process if something goes wrong to can clear.
Click to expand...
Click to collapse
When I type fastboot devices nothing happens, adb says <waiting for device> and my phone is now in FASTBOOT mode...
https://ibb.co/gf9RUd
Already Installed ADB installer, extract adb.zip into my C. then run administrator.
USB Debugging and OEM Unlock has been enabled in my phone but still my PC doesn't show any serial number
I think my PC doesn't recognize my phone
CSAPawn said:
Already Installed ADB installer, extract adb.zip into my C. then run administrator.
USB Debugging and OEM Unlock has been enabled in my phone but still my PC doesn't show any serial number
I think my PC doesn't recognize my phone
Click to expand...
Click to collapse
Just copy paste all the commands that I gave you. It´s fastboot devices not fastboot device in fastboot you ever have to write exactly or the command won´t work.