Related
i wanna to buy a bit expensive case with top quality of case...
you can find it HERE
Perhaps you should say what sort of case your after? There are expensive cases of all types, e.g. silicone, hard case, leather cases.
moogley said:
Perhaps you should say what sort of case your after? There are expensive cases of all types, e.g. silicone, hard case, leather cases.
Click to expand...
Click to collapse
i want hard case..
'zenus' are pretty nice. a quick search will show them on ebay
if you want a hard case go for melkco im actually using one right now.. its pretty good..
I am using iaccy hard case it's very gud!
buy an origional samsung flip leather case. can't beat an OEM
what about the heat if use the phone in a case - I had before a silicone case but I felt uncomfortable with it - got the impression that the phone is getting a bit too warm
Hello all,
I've always only had the Otterbox Commuter as my one and only case for phones, and with them being so slow to get out the color I want for the S4, I was wondering if I should keep waiting for a bit longer or go with another choice like the Incipio DualPro or Seidio Active. I don't have any experience with either of them, so I'm wondering if anyone who has used them can shed some light (both good and bad) on them.
Thanks.
facetubespam said:
Hello all,
I've always only had the Otterbox Commuter as my one and only case for phones, and with them being so slow to get out the color I want for the S4, I was wondering if I should keep waiting for a bit longer or go with another choice like the Incipio DualPro or Seidio Active. I don't have any experience with either of them, so I'm wondering if anyone who has used them can shed some light (both good and bad) on them.
Thanks.
Click to expand...
Click to collapse
Incipio Dual Pro is horrible. Fitment is off and constantly slips on an end, exposing the screen with no lip coverage. Luckily it was free from the ATT store for me, but i wish i chose a different case from them. I ended up ordering a minimalist JL case from amazon anyway.
I have an Incipio case and I think it's great. Probably the best case I've had for a phone. Only like $25 too.
its_dale said:
Incipio Dual Pro is horrible. Fitment is off and constantly slips on an end, exposing the screen with no lip coverage. Luckily it was free from the ATT store for me, but i wish i chose a different case from them. I ended up ordering a minimalist JL case from amazon anyway.
Click to expand...
Click to collapse
Hmm I've been reading up on it for the S4 and.....that's the first I've heard of it. Will look into it more. Got pictures of it?
itslinx said:
I have an Incipio case and I think it's great. Probably the best case I've had for a phone. Only like $25 too.
Click to expand...
Click to collapse
It's $16 on Amazon right now :good:
no pics sorry, its sitting at home
Consider having a look see at the Casemate Toughcase if you like the otterbox, its actually less bulky while providing better protection for the phone. I'm very surprised this case doesn't see more play here becuase its a truly good case and I get people asking my out of the blue what it is and where I purchased it. I've got probably a dozen friends on it now and I did nothing to convince them, they mauled and pawed at the case for a few and were sold. If you are of a mind you can quickly pull up a few reviews on youtube of the case.
I've been using the Seidio Active case for a few days now. I used a 10% off coupon I found searching Google and it came out to $31 shipped. I bought the one with the grooves for your fingers. Also has a kickstand. I pull out the kickstand when holding the phone and put my ring finger under the kickstand so I have a good hold of the phone and my thumb can reach more of the screen. Kickstand also comes in handy with the smart stay option so the screen won't turn off when I'm reading. It is easy to take on and off so I can get to the battery easily. All the proper cut outs are there and are lined up perfectly. Complaints - When typing or pushing the menu / back key my fat fingers will hit the edge of the case. I just have to work on using the tip of my thumb. Depending on the angle of the phone you may not be able to see the notification light. There are covers for the volume and power button which took some getting used to but I can now hit them without looking.
krabman said:
Consider having a look see at the Casemate Toughcase if you like the otterbox, its actually less bulky while providing better protection for the phone. I'm very surprised this case doesn't see more play here becuase its a truly good case and I get people asking my out of the blue what it is and where I purchased it. I've got probably a dozen friends on it now and I did nothing to convince them, they mauled and pawed at the case for a few and were sold. If you are of a mind you can quickly pull up a few reviews on youtube of the case.
Click to expand...
Click to collapse
How well does that case work with a glass screen protector?
Sent from my SPH-D710 using xda app-developers app
I have the Incipio Dual Pro Carbon now as my temporary case. The rubber is constantly coming off from around the lip. You see the silver when this happens. Not a huge deal but in a drop it won't be that good. Also the silicone grabs a little bit of lint.
Seidio active... I have it on my Nexus 7 and had it on my Note 1.... Huge lint magnet, OLD OLD design, silicone can be warped and won't lay flat in some areas.
Otterbox Commuter.... I will order one of the colored models when available. Buttons were terrible on the S3 but it seems to have an improved design....Putting the case on seems to be better than the S3... Overalll good design.
I also ordered the Cygnett Workmate... It seems to cover the issues from the other case and offers better grip... I will know in a couple of weeks.
Ttrain721 said:
How well does that case work with a glass screen protector?
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
The edges of the case do come over the top of the device to the screen side but this is only the softer inner portion of the case and I'm thinking it would work fine but I do not use screen protectors so I'm not certain. You can see it pretty clearly in some of the youtube videos of the case so you should be able to make a call from that. A link is here ---> http://www.youtube.com/watch?v=7l3X7Oxgx5I and the same fellow reviews several others which might catch your interest as well.
I've included a couple pictures that show something you cant see there. The one is of my year old S3 case next to my brand new S4 case. Notice how the thing still looks new? The other seems like kind of an oddball picture but what you are looking at is the largest portion of the soft inner case and the thing to notice there is the lack of lint. While these do catch a tiny bit of lint it is very little as you can see there. I did not clean the case up, it went from my pocket to the drawer after my S4 got here.
On my S3 I have had my phone in that case directly alongside a friend who had his in a commuter case and we both agreed that this case felt better in the hand and it had a more premium feel. It also has better grip but does not hang in the pocket. He in fact is one of the people I know who ditched his case and got the Casemate instead. Now I've obviously not seen the Otterbox for the S4 yet but it appears much like the Casemate counterpart to be pretty much a rehash and I would expect that they will compare similarly again.
facetubespam said:
Hmm I've been reading up on it for the S4 and.....that's the first I've heard of it. Will look into it more. Got pictures of it?
It's $16 on Amazon right now :good:
Click to expand...
Click to collapse
I bought mine (Dual Pro) at a TMob store. I totally disgaree regarding overlapping screen. It TOTALLY protects the screen via it's superb fit overlapping. Plus it has a nice "feel just holding it'. Used to have a Body Glovefor my S3. The bodyglove was on the thick side and it just didn't have the same tactile feeling when holding the phone. Mine is black with Grey...IOW two tone. Only saw it in a TMob store. Solid colors online from this link.
http://store.androidcommunity.com/incipio-dualpro-hard-shell-case-with-silicone-core/4A225A14120.htm
krabman said:
The edges of the case do come over the top of the device to the screen side but this is only the softer inner portion of the case and I'm thinking it would work fine but I do not use screen protectors so I'm not certain. You can see it pretty clearly in some of the youtube videos of the case so you should be able to make a call from that. A link is here ---> http://www.youtube.com/watch?v=7l3X7Oxgx5I and the same fellow reviews several others which might catch your interest as well.
I've included a couple pictures that show something you cant see there. The one is of my year old S3 case next to my brand new S4 case. Notice how the thing still looks new? The other seems like kind of an oddball picture but what you are looking at is the largest portion of the soft inner case and the thing to notice there is the lack of lint. While these do catch a tiny bit of lint it is very little as you can see there. I did not clean the case up, it went from my pocket to the drawer after my S4 got here.
On my S3 I have had my phone in that case directly alongside a friend who had his in a commuter case and we both agreed that this case felt better in the hand and it had a more premium feel. It also has better grip but does not hang in the pocket. He in fact is one of the people I know who ditched his case and got the Casemate instead. Now I've obviously not seen the Otterbox for the S4 yet but it appears much like the Casemate counterpart to be pretty much a rehash and I would expect that they will compare similarly again.
Click to expand...
Click to collapse
Man, that is some kind of funky back they have there. How does it feel? What is it?
And you said that Casemate offers better protection than the Commuter, any links to vids/proof to this? Cause if that's true, then that's a great deal. It looks like it is as bulky as the DualPro. Lastly, how are the colors with the Casemate? Got sick of all black, and that's why I've been looking elsewhere while waiting for the Commuter colors. Thanks.
Incipio DualPro
I purchased my Incipio DualPro from an AT&T store ($35 + tax) just to have something to protect the phone while I figure out what I really want as far as a case. I went in to get the cheapest thing they had but really liked the look of the fake carbon fiber which looks even better in person. But, the silicone layer is so loose and floppy that even with the stiff Plextonium frame:laugh:, it won't hold its shape leaving the bezel exposed where the fancy named frame isn't. This case had the makings of a winner.
Love this look:
Hate this:
Returned to AT&T store today!
The outer shell is plastic. It has the appearence of the knurling you see on a ratchet handle for example. In person it looks good and has a better feel than that of the Otterbox counterpart. The bulk of the case is about the same as the commuter, it is designed for protection and those who would avoid the Otterbox commuter for that reason would want to avoid it as well. That said it is slighly less bulky than its commuter counterpart because it is thinner.
As to protection there are no sure proofs, no 1000 phones dropped and here is the absolute numbers, test. You have to look at the case and make a judgement. The casemate clearly covers the corners better and has a better fit which combined with what are visibly better materials means you can pretty much figure your phone has a better chance than it does in the commuter. There is no sure thing. I had my S2 and then S3 both in the same case for those phones and while I haven't dropped the S4 yet I did have occasion to drop both of those several times and neither suffered a scratch although again no case will protect against bad luck.
In regards to the colors, I've no idea. I always go black so have never looked. Best bet might be to check the case out in a store. Its popular enough that I noticed our AT&T shop here had some on the shelf for S3s. Or if you have a case kiosk at the mall they will likely have one and you can check out the material yourself. Casemate has many other cases but I have no experience with them. I was Otterbox all the way till I ran into the toughcase which just plain out commuters the commuter at its own game. IMO
Looking at the dimensions of all the products, it looks like Casemate is the bulkiest, with Otterbox second, and Incipio DualPro the least bulkiest.
The one thing I'm not a fan of the Casemate from the pictures is that there seems to be more open exposed areas, especially at the top.
I ordered the Dual Pro case and have been waiting for it to come in.... I bought the Body Glove Dimensions case from the T-Mobile store just to have something on it until the Dual Pro case came in...The Dual Pro case looked really nice in the store but I want the white and gray one that they didn't have.. Now I'm hearing all the crappy reviews about the Dual Pro case and I'm having buyers remorse...Maybe I will get one from a good batch that will fit like a glove...UNLIKELY!!!! Anyway the Body Glove Dimensions case feels really good in my hand and looks nice however it doesn't protect anything just nice and slim.
facetubespam said:
Looking at the dimensions of all the products, it looks like Casemate is the bulkiest, with Otterbox second, and Incipio DualPro the least bulkiest.
The one thing I'm not a fan of the Casemate from the pictures is that there seems to be more open exposed areas, especially at the top.
Click to expand...
Click to collapse
Im not sure where you are getting your dimensions from but I can tell you from actually having both in my hand with the S3 the toughcase is slimmer. Since it appears that the Commuter is a reboot with a few minor changes just as the toughcase is for S4 I'm pretty sure you are going to see the same thing again. Also the only openings on the tough case are where the IR and headphone jacks are and the same applies on the bottom where there is no opening other than the two ports there. The Otterbox possesses exactly the same openings in their case and then unlike the otterbox the casemate piece does not have the wide open corners which are the single most likely spot for the phone to hit in a drop.
lol Sometimes you just cant let a favorite go, I do it myself. Either way you're getting a good case that stands a real chance of saving your overpriced ludicrously profitable for Samsung device so its all good. :good:
prototype.77 said:
I ordered the Dual Pro case and have been waiting for it to come in.... I bought the Body Glove Dimensions case from the T-Mobile store just to have something on it until the Dual Pro case came in...The Dual Pro case looked really nice in the store but I want the white and gray one that they didn't have.. Now I'm hearing all the crappy reviews about the Dual Pro case and I'm having buyers remorse...Maybe I will get one from a good batch that will fit like a glove...UNLIKELY!!!! Anyway the Body Glove Dimensions case feels really good in my hand and looks nice however it doesn't protect anything just nice and slim.
Click to expand...
Click to collapse
You do have to remember that those that have problems are usually the ones that take to online to complain, so just take all the amount of bad stuff with a grain of salt.
krabman said:
Im not sure where you are getting your dimensions from but I can tell you from actually having both in my hand with the S3 the toughcase is slimmer. Since it appears that the Commuter is a reboot with a few minor changes just as the toughcase is for S4 I'm pretty sure you are going to see the same thing again. Also the only openings on the tough case are where the IR and headphone jacks are and the same applies on the bottom where there is no opening other than the two ports there. The Otterbox possesses exactly the same openings in their case and then unlike the otterbox the casemate piece does not have the wide open corners which are the single most likely spot for the phone to hit in a drop.
lol Sometimes you just cant let a favorite go, I do it myself. Either way you're getting a good case that stands a real chance of saving your overpriced ludicrously profitable for Samsung device so its all good. :good:
Click to expand...
Click to collapse
:silly: I think on the corners, they both go about it differently, Otterbox has the silicone there, and casemate has both, with the plastic outside. Bet they both have their own science reasons for doing it that way lol.
I'll wait it out a little while longer before deciding. I think my biggest concern about the casemate is that I won't like how the textured back feels.
JawjaBill said:
I purchased my Incipio DualPro from an AT&T store ($35 + tax) just to have something to protect the phone while I figure out what I really want as far as a case. I went in to get the cheapest thing they had but really liked the look of the fake carbon fiber which looks even better in person. But, the silicone layer is so loose and floppy that even with the stiff Plextonium frame:laugh:, it won't hold its shape leaving the bezel exposed where the fancy named frame isn't. This case had the makings of a winner.
Love this look:
Hate this:
Returned to AT&T store today!
Click to expand...
Click to collapse
Mine does exactly this.
I just saw that UAG (urban armor gear) is going to start shipping their cases soon.... might have to look into them now :/
Never had a one piece polycarbonate silicone case before.
So I decided to do a review on a case which I've been using since my HTC One M7 days. It's the Urban Armor Gear case. This is my first ever review so I do apologise if it seems a bit biased but I'll try and make it as honest as possible.
Let's start off with some basic overview of the product itself.
The UAG Rugged Case for the HTC One M9 is a fused composite case that consists of a hard polycarbonate plastic and soft (but rigid to the feel) rubber. I personally love the military design of the back of the case. The rugged feeling is further enchanced by the rubber bolts that are near the edge of the case. The corners have rubber bumpers that absorbs impact from a drop on the corner of the device because let's face it, no device drops face down all the time right? A new addition from the old M7 case is the grips on the side of the case. I did find myself trying to grip my M7 firmly when I took it out of my pocket with the old case that didn't have the grips at the side but with the new M9 case, the added side grips are a godsend. While not everyone is into the solidness and rugged feel, I personally LOVE it.
Picking it up, you can immediately feel how solidly built it is with the plastic and rubber construction. It definitely adds some heft to the device but there's always two sides to a coin. I personally love the added weight because it tells me that I have a quallity product in my hands and I'm not afraid that anything will dent at all should a drop occur. Doing some research, there are other cases out there that have similar features like the Otterbox series of cases. I find that two seperate pieces is way too troublesome for me as assembly and deassembly can be a pain whereas the UAG can easily slip in and out although it's a bit difficult to get it out once it's in there which is good so I know that my M9 won't fly out of the case anytime soon lol.
Everyone knows about that shiny black top on the M9 right? It's the IR Blaster. UAG has actually thought of that and made a cut out at the top of the case for the IR! A nice addition! The only problem that I could find with the case after about one week of use is that the buttons are a bit hard to press straight out of the box. You need a period of "burn-in" for the rubber at the buttons to soften up before it feels normal to press. Another thing is the lack of colour options on the website. It's currently available in Ash (Smoked) and Maverick (Transparent) which is really little compared to when I had the M7 and it had colours like Aero, Outland and so on. I do hope UAG brings those colour options back for the M9.
Other than that, I really have nothing else to say about it. It's a rugged and solidly built case and I really like it a lot. It has both beauty and protection in one. Not many cases have both. If you're in the market for a rugged case and don't like the hassle of a seperate piece case like Otterbox, look no further than UAG.
I hope I wasn't too biased in this first mini review of mine. Do add your opinion in the posts below. I'd love to hear what others think of UAG's recent colour options like ash and maverick as compared to the solid colours.
Looking for a new case myself. Was kind of sold on the tech 21 but I've never had uag before and might invest..
dladz said:
Looking for a new case myself. Was kind of sold on the tech 21 but I've never had uag before and might invest..
Click to expand...
Click to collapse
If you're into the rugged protection type, then UAG is for you. But if you're into the slim cases or TPU cases, you might find that UAG cases adds a bit of weight and thickness to the phone.
Androidian10 said:
If you're into the rugged protection type, then UAG is for you. But if you're into the slim cases or TPU cases, you might find that UAG cases adds a bit of weight and thickness to the phone.
Click to expand...
Click to collapse
If I could get away with it then I'd probably go without a case, but weirdly on the flip side to that, out of the cases I have had, I don't mind chunky ones, I'm not a small bloke by any means and have pretty big hands ( note 4 was no problem) having said that, I've just ordered the verge versus in titanium, that's a two parter, next pay day which is a few days I'm going to get a few of them, uag, spigen hybrid and if I can find a tough case with the dot style then I'll be more than happy with that. I'd prefer not lose a feature.
dladz said:
If I could get away with it then I'd probably go without a case, but weirdly on the flip side to that, out of the cases I have had, I don't mind chunky ones, I'm not a small bloke by any means and have pretty big hands ( note 4 was no problem) having said that, I've just ordered the verge versus in titanium, that's a two parter, next pay day which is a few days I'm going to get a few of them, uag, spigen hybrid and if I can find a tough case with the dot style then I'll be more than happy with that. I'd prefer not lose a feature.
Click to expand...
Click to collapse
Maybe you could take a look at the Speck cases as well. I used to have the candyshell on my old old iPhone 3G S. Was a pretty good case with dual protection as well. I was choosing between the UAG and Candyshell as well. I'm planning on getting the Candyshell Grip for my next case.
Androidian10 said:
Maybe you could take a look at the Speck cases as well. I used to have the candyshell on my old old iPhone 3G S. Was a pretty good case with dual protection as well. I was choosing between the UAG and Candyshell as well. I'm planning on getting the Candyshell Grip for my next case.
Click to expand...
Click to collapse
Still waiting on the verge to be delivered, I'm a massive fan of Tech 21 as they've actually revolutionized the technology, also they can accommodate a phone with minimal footprint.
I've never heard of speck but i'll have a nose and see what they have to offer.
Strictly speaking i would love to have the hunter f for my phone but i doubt they'll make one, best looking cases period.
dladz said:
Still waiting on the verge to be delivered, I'm a massive fan of Tech 21 as they've actually revolutionized the technology, also they can accommodate a phone with minimal footprint.
I've never heard of speck but i'll have a nose and see what they have to offer.
Strictly speaking i would love to have the hunter f for my phone but i doubt they'll make one, best looking cases period.
Click to expand...
Click to collapse
I think the UAG stands out for me is because it eliminates the curved back of the phone. When you slip the phone into the case, it becomes a block so it won't wobble around when I put it on the table. But yeah, I'd say Speck and UAG are in the same category. But do come back with your views on the verge tho.
Androidian10 said:
I think the UAG stands out for me is because it eliminates the curved back of the phone. When you slip the phone into the case, it becomes a block so it won't wobble around when I put it on the table. But yeah, I'd say Speck and UAG are in the same category. But do come back with your views on the verge tho.
Click to expand...
Click to collapse
Will do, should be here tomorrow.
Dude.... that's not related to the thread at all. Make a new one with your question.
If the case came in other colours like Black or Orange, I'd be all over it. I'm not a fan of the transparent cases. This does seem like a well built, nice looking case though.
nice looking case
Nexus 6P Case - MoKo [Anti Drop] Halo Series Hybrid Cover with TPU + Clear PC Back Panel Bumper Cover for Huawei Google Nexus 6P 5.7 Inch 2015 Smartphone, Crystal Clear
https://www.amazon.com/dp/B00NTQ2NNE/ref=cm_sw_r_other_awd_XhIfwbANZ8S0F
Sent from my SM-N920C using Tapatalk
Thanks!
Sent from my Nexus 5 using Tapatalk
Ordered it just now and came here to post it but you beat me to it. It seems like a great case without the bulk. It gets good reviews on other devices.
Sent from my SM-G530H using Tapatalk
DinarQ8 said:
Nexus 6P Case - MoKo [Anti Drop] Halo Series Hybrid Cover with TPU + Clear PC Back Panel Bumper Cover for Huawei Google Nexus 6P 5.7 Inch 2015 Smartphone, Crystal Clear
https://www.amazon.com/dp/B00NTQ2NNE/ref=cm_sw_r_other_awd_XhIfwbANZ8S0F
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
looks great... but not eligible for prime.
Thanks for the link. Just ordered one!
That's just a standard tpu case that will flood eBay at that price minus shipping soon. It will have rough edges and loose fits on sides. It will yellow and get scratched up within month if not weeks.
Only good for holding you over until better stuff comes.
bombaw8 said:
That's just a standard tpu case that will flood eBay at that price minus shipping soon. It will have rough edges and loose fits on sides. It will yellow and get scratched up within month if not weeks.
Only good for holding you over until better stuff comes.
Click to expand...
Click to collapse
I disagree...Look at the reviews for the same case by the same manufacturer for other devices. It's a decent enough case.
bombaw8 said:
That's just a standard tpu case that will flood eBay at that price minus shipping soon. It will have rough edges and loose fits on sides. It will yellow and get scratched up within month if not weeks.
Only good for holding you over until better stuff comes.
Click to expand...
Click to collapse
the description specifically says that the back is "PC" or polycarbonate. the TPU is probably being used as cushion.
The case is a polycarbonate back and TPU bumper, which is the same design as Spigen ultra hybrid crystal clear. The TPU being flexible makes it much easier to put the case on, while the polycarbonate back makes it more protective against drops.
Sent from my Nexus 5 using Tapatalk
rajendra82 said:
The case is a polycarbonate back and TPU bumper, which is the same design as Spigen neo hybrid crystal clear. The TPU being flexible makes it much easier to put the case on, while the polycarbonate back makes it more protective against drops.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
This is the type of case I was looking for.
Just bought one.
toyanucci said:
I disagree...Look at the reviews for the same case by the same manufacturer for other devices. It's a decent enough case.
Click to expand...
Click to collapse
Do a search on eBay "nexus case pc back" for example. You will see what at I meant.
Theses things will flood the market at half the price of that Amazon listing.
Full soft tpu case are sometimes less than a buck a piece.
As I said if you need something to hold you over, sure. But don't expect anything good. And it certainly is not a "good deal".
Given the estimated shipping date it may not even get here before my phone.
I've been here before, believe me it's worth spending a couple of more dollars to be on the safe side.
Btw, is it just me or it just makes the deal look shady when they jack up the shipping like that to hide the true price?
bombaw8 said:
Do a search on eBay "nexus case pc back" for example. You will see what at I meant.
Theses things will flood the market at half the price of that Amazon listing.
Full soft tpu case are sometimes less than a buck a piece.
As I said if you need something to hold you over, sure. But don't expect anything good. And it certainly is not a "good deal".
Given the estimated shipping date it may not even get here before my phone.
I've been here before, believe me it's worth spending a couple of more dollars to be on the safe side.
Btw, is it just me or it just makes the deal look shady when they jack up the shipping like that to hide the true price?
Click to expand...
Click to collapse
Yea, the real cost is hidden in the shipping lol. Re the case though, I just want something thin and light that can still protect from scratches. I had the Spigen Neo hybrid and the other one with the colored back on my note 3 and eventually went caseless because of how much thinner the phone felt without those bulky cases. They look great and do offer a lot of protection but ultimately added too much bulk which is why this current Moko case has attracted me. Not because of the price but because of how little bulk it seems to add in the pics.
Anyhow, if you come across any thin and light cases be sure to post back and let us know, I'm sure I'm not alone in the thin light boat LOL.
toyanucci said:
Yea, the real cost is hidden in the shipping lol. Re the case though, I just want something thin and light that can still protect from scratches. I had the Spigen Neo hybrid and the other one with the colored back on my note 3 and eventually went caseless because of how much thinner the phone felt without those bulky cases. They look great and do offer a lot of protection but ultimately added too much bulk which is why this current Moko case has attracted me. Not because of the price but because of how little bulk it seems to add in the pics.
Anyhow, if you come across any thin and light cases be sure to post back and let us know, I'm sure I'm not alone in the thin light boat LOL.
Click to expand...
Click to collapse
yeah, im in the same boat. went through many cases with my n5. including a couple identical to this one being discussed here. i eventually settled on ringke fusion case after a thinner case failed to protect the screen after i dropped it onto concrete from waist height. not sure if the ringke case would have saved it but i feel the extra few mm added around the edges do provide some protection that the thinner cases do not.
these transparent cases look very thin in renders but i can almost guarantee you they are no thinner than any full soft tpu case. these things provide mostly what i would call scratch protection rather than drop protection. my biggest problem however is most of these cases are cheaply made in high volumes from the same factories. most of them will turn yellow quickly and the stiff clear back will get scratched up easily. if you are really lucky, you end up with one that has sharp/rough edge that keeps messing up your screen protector, glass or film.
i have tried everything from backless bumpers (pointless) to amour cases (ugly and bulky). for now i will probably stay with Ringke fusion or one of the several others just like it, at least i know what i will be getting and these companies do have decent customer service to take care of manufacturing or design problems free of charge.
bombaw8 said:
yeah, im in the same boat. went through many cases with my n5. including a couple identical to this one being discussed here. i eventually settled on ringke fusion case after a thinner case failed to protect the screen after i dropped it onto concrete from waist height. not sure if the ringke case would have saved it but i feel the extra few mm added around the edges do provide some protection that the thinner cases do not.
these transparent cases look very thin in renders but i can almost guarantee you they are no thinner than any full soft tpu case. these things provide mostly what i would call scratch protection rather than drop protection. my biggest problem however is most of these cases are cheaply made in high volumes from the same factories. most of them will turn yellow quickly and the stiff clear back will get scratched up easily. if you are really lucky, you end up with one that has sharp/rough edge that keeps messing up your screen protector, glass or film.
i have tried everything from backless bumpers (pointless) to amour cases (ugly and bulky). for now i will probably stay with Ringke fusion or one of the several others just like it, at least i know what i will be getting and these companies do have decent customer service to take care of manufacturing or design problems free of charge.
Click to expand...
Click to collapse
Looked up the Ringke FUSION and it looks great. I see they are having issues re their confirmation of the 6P ship dates but I looked up a review of the Ringke FUSION on the Note 5 and it's great, it's along the lines of what I have in mind, it looks to add very little bulk! Hopefully they get it out soon enough so they can capitalize on the initial surge of sales of 6P accessories.
thanks! Just ordered one myself.
:Canceled my order:
I hate scammy pricing like this. Its basically $5 with free shipping you can't return or get refund if/when its crap.
grabbed one also, thanks OP!
Trueglich said:
I hate scammy pricing like this. Its basically $5 with free shipping you can't return or get refund if/when its crap.
Click to expand...
Click to collapse
This.
Seriously, think about it folks.
Elnrik said:
This.
Seriously, think about it folks.
Click to expand...
Click to collapse
It's a good warning for sure, but it's still $4.99 total for a case that - judging from the company's other products and their reviews - is most likely fine. That's an acceptable risk for me.
If I've learned anything from past experience its that I will settle with the Supcase unicorn beetle case because its awesome. I'll still purchase about a dozen cases, but chances are very likely that I will settle with that one.
For most phones and tablets it's pretty easy to find decent cases, iPhone and iPad Users are spoilt for choice, Samsung useres can also pick and choose how they like, even for the Nexus 5X and 6P one can find an abundance of cases in any color shape or form. But not for the Pixel C - doubtless this is because of the slender market for this tablet. I have been looking all over the net for a simple TPU case for the Pixel C, you know the type of silicone case that just covers the back of the device but not the screen. All I could find was universal folio cases or smart cases with a lid. I even tried my luck on searching Chinese wholesale but no luck. If anyone has come across a simple back cover only TPU or hard shell case that only covers the back please let me know.
Thanks so much.
x7aa1186 said:
For most phones and tablets it's pretty easy to find decent cases, iPhone and iPad Users are spoilt for choice, Samsung useres can also pick and choose how they like, even for the Nexus 5X and 6P one can find an abundance of cases in any color shape or form. But not for the Pixel C - doubtless this is because of the slender market for this tablet. I have been looking all over the net for a simple TPU case for the Pixel C, you know the type of silicone case that just covers the back of the device but not the screen. All I could find was universal folio cases or smart cases with a lid. I even tried my luck on searching Chinese wholesale but no luck. If anyone has come across a simple back cover only TPU or hard shell case that only covers the back please let me know.
Thanks so much.
Click to expand...
Click to collapse
+1
I also want a TPU case and haven't found anything anywhere - ebay, amazon, vendor sites
This is exactly what I'm looking for as well. All I can find are folios. :/
Sent from my Pixel C using Tapatalk
yep. this. i want the rubber bumper case type cover because the back of the device is so slick that it tends to want to slide off my lap. also, it would be nice to have something to soften the bezel edge because it can dig into your hands if you're holding it for a long time.
Totally agree. There seems to be a Chinese design for a bumper case, however it doesn't seem possible to order it at the moment. Anyone else had any luck finding one ?
Link to Chinese design m.alibaba.com/product/60386341810/10-2-inch-silicone-tablet-bumper.html
x7aa1186 said:
Totally agree. There seems to be a Chinese design for a bumper case, however it doesn't seem possible to order it at the moment. Anyone else had any luck finding one ?
Link to Chinese design m.alibaba.com/product/60386341810/10-2-inch-silicone-tablet-bumper.html
Click to expand...
Click to collapse
http://m.alibaba.com/product/60386341810/10-2-inch-silicone-tablet-bumper.html
Potentially
Came across this guy that might fit the bill:
amzn.com/B01CQTFRAK
No reviews and takes forever to ship. If it were cheaper I'd definitely take the jump, but I'm a bit skeptical...
Does anybody know about these? skinomi.com/google-pixel-c.html
dcwilcox said:
Came across this guy that might fit the bill:
amzn.com/B01CQTFRAK
No reviews and takes forever to ship. If it were cheaper I'd definitely take the jump, but I'm a bit skeptical...
Click to expand...
Click to collapse
I already contacted them, the description is wrong. They sell "normal" pu leather folios, some are bundled with headphones or screen protectors. They removed the product i mentioned in my request but all other bundles are still listed with the wrong description.
what a freakin' tease. i would have loved to have had that clear tpu case.
All products mentioned are found on US Amazon.com
So far the only TPU case I have seen that's for Pixel C <--- does NOT fit Pixel C as customer lefted a photo review on the product he received.
http://www.amazon.com/Junsi-Leather-Headphone-Google-Tablet/dp/B01CQTFSKO
I do not have it in my possession to test the fitment yet, just wanna get the words out with others that's looking for one.
(granted the demo photos doesn't show pixel C in it, but some other products. Just hope these China vendors get the fitment right.)
Other interesting alternatives I have seen so far is the full body coverage skin
http://www.amazon.com/Skinomi%C2%AE-TechSkin-Protector-Replacement-Anti-Bubble/dp/B017L0UKOW
Personally I'm currently using Moko's folio cover as the additional thickness it added is still deem acceptable to me and does the job.
http://www.amazon.com/MoKo-Google-Pixel-Case-Lightweight/dp/B019TOM5PU
MojoFilter said:
Does anybody know about these? skinomi.com/google-pixel-c.html
Click to expand...
Click to collapse
Hey there, the skinomi skins work just fine. A bit of a pain to apply but not too bad, just watch their intructional Video. But this is just a Skin and no case, so no drop protection really.
SonySteve said:
All products mentioned are found on US Amazon.com
So far the only TPU case I have seen that's for Pixel C
http://www.amazon.com/Junsi-Leather-Headphone-Google-Tablet/dp/B01CQTFSKO
I do not have it in my possession to test the fitment yet, just wanna get the words out with others that's looking for one.
(granted the demo photos doesn't show pixel C in it, but some other products. Just hope these China vendors get the fitment right.)
Other interesting alternatives I have seen so far is the full body coverage skin
http://www.amazon.com/Skinomi%C2%AE-TechSkin-Protector-Replacement-Anti-Bubble/dp/B017L0UKOW
Personally I'm currently using Moko's folio cover as the additional thickness it added is still deem acceptable to me and does the job.
http://www.amazon.com/MoKo-Google-Pixel-Case-Lightweight/dp/B019TOM5PU
Click to expand...
Click to collapse
Thanks SonySteve I have the skinomi techskin on. Just such a shame though, as I would have loved a simple bumper case.
x7aa1186 said:
Hey there, the skinomi skins work just fine. A bit of a pain to apply but not too bad, just watch their intructional Video. But this is just a Skin and no case, so no drop protection really.
Click to expand...
Click to collapse
That's exactly my concern also. At most it'll just prevent scratches on the original metal body, wouldn't prevent / provide enough protection from possible little bumps / drops during daily uses.
SonySteve said:
That's exactly my concern also. At most it'll just prevent scratches on the original metal body, wouldn't prevent / provide enough protection from possible little bumps / drops during daily uses.
Click to expand...
Click to collapse
Exactly, a Skin is not enough, a Folio Case will protect the Pixel C allround but I really dislike the front Display flap. Very annoying. I opted for buying the skinomi techskin combined with this http://www.amazon.com/Booncover-Uni...=UTF8&qid=1463390156&sr=8-2&keywords=Reboon+l
This is expensive though. Would have much prefered a simple bumper case. Grrr.
Negative on the potential TPU case I shared the other day.
A customer that got the product, left a photo review saying it aren't the right fitment.........
http://www.amazon.com/Junsi-Leather-Headphone-Google-Tablet/dp/B01CQTFSKO
This is frustrated, I can't find no bumper case for this device.
i thought about trying to find a similar shaped tablet and using a tpu case for it and i would just make my own camera/speaker holes. not the prettiest solution but i think it would get the job done. the closest thing i could find to the pixels dimensions was the galaxy tab 10.1. so i'm thinking about picking up this case:
https://www.amazon.com/SOJITEK-BPA-...568&sr=8-33&keywords=galaxy+tab+10.1+silicone
Dr. Light said:
i thought about trying to find a similar shaped tablet and using a tpu case for it and i would just make my own camera/speaker holes. not the prettiest solution but i think it would get the job done. the closest thing i could find to the pixels dimensions was the galaxy tab 10.1. so i'm thinking about picking up this case:
https://www.amazon.com/SOJITEK-BPA-...568&sr=8-33&keywords=galaxy+tab+10.1+silicone
Click to expand...
Click to collapse
Let u s know how well it fits. Thank you and all the Best
I ordered a cheap chinese tpu case for a samsung galaxy tab 10.1 but it does not fit.
The corners of the Samsung device are rounder than the pixel c. Height and width are ok.
I had to remove the corners of the case, now the tablet fits, but the corners are needed to give the case stability and keep it around the tablet.
Without the corners the case slips down of the tablet easily. I hoped it would fit but without the stability it is useless for me...