Hello. I have been waiting a while for a CynogenMod for the i5800 and yesturday I attempted to use it on my phone.
After rooting via z4root apk, I downloaded the free version of ROM Manager and when it asked select your model of phone the i5800 isn't on there so I picked the ZTE Blade as it is another low end phone. ROM Manager then proceeded to make a 'backup'.
Then went onto trying to install from .zip using the current build for the i5800 from here and selected it from the recovery menu only to see after a long boot up that it had booted into the stock ROM albeit still rooted. Now everytime I turn my phone off it acts like its been wiped and has 0mb of memory (should have about 150 or similar) so I can't get a root explorer.
Hopefully this is a simple solution as its still on android2.1-update1 aka what the phone shipped with and I believe Samsung is in the process of sending out a 2.2 update so could someone please say how I can make sure the phone has no evidence of flashing and how to stop the constant wiping of the phones memory so that I can sell the phone without any risks.
Many thanks, JTS.
Hello all
i,ve samsung SCH-R910 MetroPCS phone , so i install CWM on it and backup everything , and then tried to install custom rom , and i get epic 4g cyanogenmod rom and when it begin to install the phone is rebooted into CWM and never get back my old OS i tried to reboot many times but still booted into CWM also i restore the original OS that i backed up before and it completed successfully but when rebooting the phone still booted into CWM ,
can anyone please help me just to return to the original rom or any custom rom
i need my phone just to work now i really stuck here please help me
thanks
where can i find official ROM for this model ??
please help me to restore my phone
I have a similar problem install CWM and make a backup, install CyanogenMod uns as not connected to the network restore the backup, now does not start and not let me get into Recovery, only stays on the screen for samsung mobile, please help.
There isn't cyanogen for the indulge, best I've found for this device is was a custom rom and kernel made by Konane posted on android forums all things root subsection for the indulge. Seems dev is dead for the device tho as it was posted last year and no new updates to it which are needed because it seems metro found a way to void some of the great improvements made.
Sent from my SCH-R720 using Tapatalk 2
Hi folks and especially Chainfire if he is tracking nu-bees,
Nu-bee here. Just installed Resurrection Remix Pro ICS firmware following instructions at Galaxy2Root.com. They had me install 3 files with the Remix package, GoogleApps and GoogleAppsFix. All went well. Then the instructions told me to install 10_CWM.zip so that ClockWorkMod would work. But CWM had been overwritten, so I couldn´t install something from my internal sdcard. I thought I would be clever and install one of Chainfire´s custom CF-root packages. I selected one close to the kernel number I have installed (LPJ). I flashed it over with Odin.
No joy. The phone booted, showed the opening logo and then lay there with a black screen. But CWM recovery still was active, so I wiped the system and reinstalled the files this time including 10_CWM.zip (4 files). This time I have ICS but CWM is gone again. I´d like to back up the ROM.
I´d like suggestions as to how to get CWM installed. I would be most grateful! I read the entire 450 page set of posts on Chainfire´s CF-root upgrades (whew). I´d use one of those if I was confident that I wouldn´t go back to a black screen again.....
still trying
Well, I haven´t gotten much of a response with this. With this 10 post limit for noobies, I can´t get to the developers forum where I would find the folks who grapple with these kinds of issues.
Anyway, I flashed the latest of Chainfires kernels, the LP7 version, and ended up with a black screen again. So I went into restore (and had CWM restore at least) and restored my ROM, etc. But of course, I lost CWM in the process. And had to reconfigure my phone all over again. I had used My Backup Pro and it didn´t save the connections to the Google Market, so I had to reinstall my apps all over again. Is Titanium better in this regard? My Backup Pro claims to make better backups for rooted phones, but this was pretty feeble.
So that will be my question for this forum - should I change to Titanium? Will it get all my apps, settings, and data back into my preferred configuration?
Have a great day......
I am in same boat as you are. I buy i just installed rom with Rom manager and i have Gapps fixer and remix one left and CWM ofcourse. So my problem is i don't have Ex-sd as they suggest to Install "Cwm.zip from external sd card from recovery". How to do so ?
Please help
Thanks in advance
EDIT: Never mind I sort it out Yesterday. I installed from Rom manager & Flash recovery from it and then boot up into recovery from App and then Flash Touch Recovery.
Hello,
I have rooted my Xoom 2 ME and installed Safestrap 3.12 as explained here.
Apparently something went wrong after I tried to restore a backup to the Stock ROM Slot. I now have the Blue (instead of Red) Motorola Logo when I boot, followed by error messages telling me the "UI System" and "Configure" Applications have stopped.
Trying to solve the problem, I did a factory reset from the Stock Recovery Boot and now I see that I have lost all my Safestrap Backups and Slots.
So I have no backups to restore and no other Slots than the Stock ROM, which I cannot boot.
What are my options ?
Any help would be greatly appreciated.
Thanks.
A quick update on this
I'm having help form runandhide05 who is amazingly kind with me, answering all my questions in PM.
I have a Wi-Fi only 8.2 Xoom 2 bought in France so I have flashed this ROM : 0.268.4.MZ607.Retail.en.FR.
I could boot but when I tried to update OTA it failed. It downloads, start updating and fails so I am stuck in 3.2.2.
Also whenever I reach the page of an application in the Android Market, the Android Market quits.
Finally adb doesn't see my device.
I've tried flashing another ROM with the same result : 0.281.8.MZ607.NonEFIGSRetail.en.EU
All this is very new to me, I feel like I have learned a lot in 24 ours but I really have no idea were to go to solve this and feel like I am asking a lot to runandhide05 at the moment so if anyone as "qualified" as him had any idea to help it would be amazing.
… again runandhide05, thank you so much for all your help so far.
Problem solved !
The update succeeded when done via the "Motorola Device Manager" on PC.
After that I could use Google Play without it to quit and adb saw my device again.
I re-rooted and re-installed Safestrap with no troubles.
So I noticed there's no official thread for this tablet. I went ahead a decided to try and get a thread going for this tablet only. I am strongly considering porting a Rom and possibly a recovery pending requests from users on xda for the device.
To ROOT the Alcatel OneTouch Pop 7 p310a
1. Make sure Unknown sources is checked in Settings > Security > Device administration > Unknown Sources
2. You head over to alephzain's ROOT thread and download the framaroot 1.9.3 apk
LINK To Thread: http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
3. Follow the directions on alephzain's thread. Move the apk to the SD card and install the apk.
4. The apk will then run after clicking "install"
If successful, your OneTouch Pop 7 p310a will now be rooted after a reboot.
To test, after reboot you should see superuser in the list of installed applications.
Also you can download 'root checker' from Google play to verify.
---------
Clock Work Mod Recovery for Alcatel P310a.
DO NOT FLASH THIS RECOVERY ON ANY OTHER DEVICE OTHER THAN A P310A. THIS MAY BRICK YOUR DEVICE.
WORKING RECOVERY PORTED/TESTED BY Shawnj0
DOWNLOAD LINK ==> https://drive.google.com/file/d/0B4Bp38aW17GiOXpKNEdXQXBSbjA/view?usp=sharing
Any questions, comments, suggestions all should be directed to this thread.
Reserved.
Sent from my ALCATEL ONE TOUCH P310A using XDA Free mobile app
Reserved
Sent from my ALCATEL ONE TOUCH P310A using XDA Free mobile app
UPDATE 1/24/2015: CWM NON-Touch Now Available as a flashable img. You can use Flashify or Rashr (both can be downloaded through Google Play once you are ROOT.
Thank you for this. How many tablets has this been tested on ?
It works !!!! Now we need some lollipop on it !
memory swap mod
shawnj0 said:
UPDATE 1/24/2015: CWM NON-Touch Now Available as a flashable img. You can use Flashify or Rashr (both can be downloaded through Google Play once you are ROOT.
Click to expand...
Click to collapse
Hi, thanks for this.
Will a memory swap mod, to make the tablet see the external SD Memory as the internal storage, work with the P310A?
Searched and found this for another Alcatel device:http://forum.xda-developers.com/showthread.php?t=2284347&page=39
Is something like this already available for the tablet?
Will be a big improvement if this can be ported to the P310A, and then have a 32Gb or even a 64 Gb memory card be seen as the internal storage.
Thanks.
I have one of these little tablets from T-Mobile (gotta love free) and love it. Last night I got an update warning but have not installed it yet. Unfortunately there is very little information for them like custom ROMs or custom recovery. I would even like to find the software and files needed to return the device back to stock if there was ever a problem and it needed to be reflashed back to out of the box state. Let me know if I can help as I would love to see more for this awesome little device.
Btw, interesting fact about T-Mobile 4G on these tablets. The base is 10 USD for 1gb of 4G a month. All T-Mobile tablets also come with free 200mb 4G a month one top of that. If you have the highest plan at T-Mobile (80 USD a month, unlimited everything including 4g, no drop back to 3g at all) then the tablet actually gets 5gb a month of 4G for the 10 USD instead of 1gb.
..
Just installed the latest update from T-Mobile for the p310a and framaroot 1.93 no longer roots it. Damn.
Try this :wwwDOTmgyunDOTcom/m/en
It rooted my tablet and 2 others. It will install a "kinguser" superuser app. Download clockworks superuser from the play store.
Then disable kinguser and allow clockworks superuser to do its job.
TheEditor said:
Just installed the latest update from T-Mobile for the p310a and framaroot 1.93 no longer roots it. Damn.
Click to expand...
Click to collapse
Can you please share what is on the update?
Find out the update is still on 4.2.
According to the Tmo support site is to improve battery, camera flicker and freezing.
That is about all I see in the update. The version is still the same and I have not seen any real difference personally. Kind of wish I hadn't updated.
Btw, thanks for the recommendation. I am rooted again, woohoo.
---------- Post added at 02:46 AM ---------- Previous post was at 02:00 AM ----------
Well, I am rooted but the only SU that will work is the installed KingUser, no others will work for me.
I have the same tablet, but the P310X, not the P310A variant. Is it safe to flash the CWM recovery? I tried booting into this recovery without flashing by the fastboot flash command, but nothing happens after the transfer, the device won't boot into the new recovery.
After a little searching, it seems to me the two varians only differ in the supported cellular networks and frequencies.
Ok so I rooted this device with kingo at first. I kept have su binary issues. I installed cwm and tried to update su binary through there. I tried booting into recovery using quick boot. My tablet is stuck on tmo screen. Hard reseting takes me back to cwm but I have no backup yet , had no time to even make one. Does anyone have one by chance or a way for me to boot back up through cwm?
Recovery flashed successfully and looks great but, no partitions will mount and I cannot flash any .zips. Anyone else having issues?
I flashed the recovery but when I backed up my data and started getting "unfortunately settings has stopped" error
I did all alternatives and was forced to wipe it clean. But when I tried to restore it kept saying MS5 is not found.
So I am screwed now cause although it did clean it, the settings issue is still there and it will not let me open the wifi /buletooth settings/
keeps crashing and sometimes reboots. So I just want to revert back to the original factory firmware.
Does anyone have the original firmware??
Possible lollipop rom?
shawnj0 said:
So I noticed there's no official thread for this tablet. I went ahead a decided to try and get a thread going for this tablet only. I am strongly considering porting a Rom and possibly a recovery pending requests from users on xda for the device.
To ROOT the Alcatel OneTouch Pop 7 p310a
1. Make sure Unknown sources is checked in Settings > Security > Device administration > Unknown Sources
2. You head over to alephzain's ROOT thread and download the framaroot 1.9.3 apk
LINK To Thread: http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
3. Follow the directions on alephzain's thread. Move the apk to the SD card and install the apk.
4. The apk will then run after clicking "install"
If successful, your OneTouch Pop 7 p310a will now be rooted after a reboot.
To test, after reboot you should see superuser in the list of installed applications.
Also you can download 'root checker' from Google play to verify.
---------
Clock Work Mod Recovery for Alcatel P310a.
DO NOT FLASH THIS RECOVERY ON ANY OTHER DEVICE OTHER THAN A P310A. THIS MAY BRICK YOUR DEVICE.
WORKING RECOVERY PORTED/TESTED BY Shawnj0
DOWNLOAD LINK ==> https://drive.google.com/file/d/0B4Bp38aW17GiOXpKNEdXQXBSbjA/view?usp=sharing
Any questions, comments, suggestions all should be directed to this thread.
Click to expand...
Click to collapse
i have this device and i have searched pretty much everywhere for a mod. can you show me how i could get a lollipop mod ( if there is one available). its a pretty nifty device and it i'm hoping to get the lollipop experience on it. Thanks.
Crying on the inside
SO, i did the absolute unthinkable of unthinkable actions. i attempted to flash what was purported to be a POP 7 MIUI port, and the damn thing crashed on me. To make matters worse, the backup with CWM failed when attempting to back up /system. Anyone manage to get it to work?
Sir Webb said:
I flashed the recovery but when I backed up my data and started getting "unfortunately settings has stopped" error
I did all alternatives and was forced to wipe it clean. But when I tried to restore it kept saying MS5 is not found.
So I am screwed now cause although it did clean it, the settings issue is still there and it will not let me open the wifi /buletooth settings/
keeps crashing and sometimes reboots. So I just want to revert back to the original factory firmware.
Does anyone have the original firmware??
Click to expand...
Click to collapse
I have it
SuperUser666 said:
SO, i did the absolute unthinkable of unthinkable actions. i attempted to flash what was purported to be a POP 7 MIUI port, and the damn thing crashed on me. To make matters worse, the backup with CWM failed when attempting to back up /system. Anyone manage to get it to work?
Click to expand...
Click to collapse
Did you ever get this working? I have this tablet rooted, but no recovery...
I don't mind giving either of you my backups from titanium