Hey,
my phone was stock gingerbread v21e when I decided to try ICS. After all I got it working but was not really convinced. So I tried to downgrade to gingerbread again. First try everything was working, except one thing: When I enter the download mode it shows the korean letters, still. Is it normal or have I done a mistake while downgrading?
Sry for my bad english
edit: I used the LG Flahstool for everything and the Resurrection Guide
I've got this problem, too
it's normal you have downgraded
I had the same, when i downgraded still everytime when the download screen apeared the korean was there.
After downgrading a ran the official lg tool, it updated to v21e, still korean download mode. Then i flashed the files out the downgrade the undowngradeble topic.
That solved it
Don't ask me why:laugh:
defcomg said:
it's normal you have downgraded
Click to expand...
Click to collapse
But was the screen not something like "SW DOWNLOAD" before?
Samstag494 said:
But was the screen not something like "SW DOWNLOAD" before?
Click to expand...
Click to collapse
Yes
You just followed the undowngradeable guide and it was like before? Ill give it a try tommorow
I can't enter the Fastboot mode... Everytime I install the LG driver 1.0 und the OMAP drivers and plug the phone to the PC it just installs all the LG drivers, but OMAP wont pop up... what am I doing wrong?
Samstag494 said:
I can't enter the Fastboot mode... Everytime I install the LG driver 1.0 und the OMAP drivers and plug the phone to the PC it just installs all the LG drivers, but OMAP wont pop up... what am I doing wrong?
Click to expand...
Click to collapse
use wkparks omap4boot, it will enter fastboot for you.
Install newest lg drivers, and have omap drivers ready, go to devices then plug your phone WITHOUT batery in the usb port, omap will flash three times.
You need to click fast, first flash i opened the device properties, second flash i opened driver settings (then the actual driver not loaded message dissapears, just wait. third flash (you're still in the driver screen) click as fast as possible on the appearing driver fault line.
Then manual search for driver, the go to your omap drivers folder. instal amd64 for 64 bit (doesn't matter which procesor your pc use) if on 32 bit, install the other.
thats's all
ps i'm on a dutch system so i've translated the device screen as best as possible, but i don't know the real names. So maybe you've need extra clarificfation
Every time I try to install the drivers manually, it just shows the message "drivers could not be installed". Doesnt matter which folder I chose. Is it because Win 64 bit? I read that OMAP drivers are not compatible?
On Win 32 OMAP doesnt show up, maybe after a reboot, ill try tommorow
Okay, I got OMAP installed and the fastboot program recognizes it. But when I remove the USB cable, no LG logo is coming
when you've started wparks omap prog, choose 2, then in your screen there's a message, wait 5 seconds. Then put your battery in. no you should enter fastboot mode. It's not neccesary to remove usb cable, something i've experienced. But what works for you
I did it, problem was LG COSMO wasnt installed... (Im an idiot ) How can I test the Downloade Mode Screen?
Related
ok i need help please , i had gbread on it and installed superoneclick to get root then tried to flash cwm with vipermod. message said out of storage space or something (dont have ext mem only internal)and now phone will not turn on.
have followed this guide http://forum.xda-developers.com/showthread.php?t=1244490 and phone was recognised by omapp but couldnt change the port in device manager and couldnt find a bin to download so i tried to flash a kdz v21a
clicked start on lgflasher but nothing happened so after about 5 mins i cancelled it thinking without the port change it was a waste of time.
now i cant even get omapp to flash up when i connect phone . device manager refreshes but i cant see anything change .
hope thats enough info for some kind person to help.
many thanks in advance
marty
Try this start on step 3 its in the thrill forum but they are the same phone http://forum.xda-developers.com/showthread.php?t=1491870
sent from my acidhazard thrill
marty41 said:
...then tried to flash cwm with vipermod...
marty
Click to expand...
Click to collapse
Where did you get vipermod from? The Transformer Prime forums? That's meant for the TFP and would not have worked with the O3D since it flashes to mmcblk0p4 rather than mmcblk0p. You should have used the flasher here.
Download this, this and this. Extract smartflash.zip, install both driver packages. Then, run Windows Enabler, in the notifications bar, click it and make sure it is set to 'on'.
Now remove your phone's battery and sim card, press volume up and connect your phone to the computer. Hold volume up until it is detected by the computer. It should take no longer than 20 seconds.
Now run B_SmartFlashTool_Extern.exe, go to rom copy d/l, select LGP920_CP.fls for CP bin and LGP920_AP.bin for AP bin. Make sure under communications setup that your phone is connected (verify the com port in device manager) and then click start. If all goes well, you'll have a stock v21D phone again
Thanks for the help guys but i'm not getting a com port when i connect the phone so i don't think i can use any of those methods . or can i
i want to go back to the beginning and see if omapp will detect phone and install drivers but i can uninstall the installer but dont think that will remove the drivers , does anyone know how to do that.(cos i think i messed that bit up )
thanks again
marty
vipermod , i think i followed a link somewhere in the o3d forum where someone said u could use it to flash cwm
so , i uninstalled all lg drivers uninstalled omap installer searched registry for for any mention of omap and deleted (some wouldnt delete ) .
restarted computer (xp by the way )
then installed omap installer and lg drivers and connected phone holding vol up
and................. NOTHING whereas yesterday i had a little icon in the task bar and the opportunity to install omap drivers.
conclusion , phone is dead , i had an oppurtunity to fix it yesterday and i blew it
hope someone tells me i'm wrong but its not looking good
marty
take off battery and just put your usb cable and tell us if it shows omap in your device manager
dont press keys
if i connect phone without battery device manager just refreshes a couple of times but nothing changes with regards to ports doesn't matter if i have vol+ button in power button in or nothing
thanks anyway
marty
am i getting somewhere
update : ok so i'm on a clean install of xp and i connected the phone with vol+ and it wants to install omap4430 drivers. is that good news?
i installed omapinstaller , then the 2 lg drivers ca and ma , then reconnected the phone and went thro omap driver install but still don't have any ports in device manager
is there no way i can force it to flash without it having to think it is connected cause if its recognising it as omap4430 there must be something there
don't want to give up on it too easy , if only i put this much effort into it whilst it was working lol
marty
evening all . new update
tonight i've installed the lg support tool and drivers and found that if i leave my phone connected i occasionally get "TI sample boards" popping up in device manager for a couple of seconds without having to press buttons , unfortunately it doesn't stay on for any longer with buttons pressed.
i was wondering how to force install the "LG CDMA composite usb device " drivers cos its never asking for them as it should according to the tutorial
hope someone can help cos i've seen a few threads with same problem as me
marty
OMAP4430 driver, can't install, doesn't recognize files to install them?
following this guide http://forum.xda-developers.com/showthread.php?t=1244490 to flash my bricked LG, after I reach stop where I need to install OMAP4430 drivers with selecting folder where drivers are located, it says that can't find anything. Also it constantly connects and disconnects, any solution to this issue?
Running on Windows 7 x64
Listen drivers should be there or reinstall omap drivers ..about the connect disconnect am using the Sam windows and it happens here too but flashing works but make sure to install the drivers
sent from my lg o3d
a piece of advice:
don't ask alot ..go read.
well OMAPFlash driver shows on programs and features, but it constantly connects disconnects OMAP4430 in device manager, tried to select folder, but it just disconnects to quick that it ignores my previously selected paths.
I can't flash it, because I can't find that start_fastboot app
/ another issue, if I ignore that OMAP4430 and just carry on step by step, change port to 41 for CDMA and open LGFlashTool.exe for , it just wont open, tried even on xp sp3, still nothing... it's 1.1 version.
^^^^^ scratch that, works now with 1.2 version
now have a question, If I have 170mb kdz for 21e, can I use it in FlashTool? Because to download BIN_LGP920AT-00-V21e-EUR-XXX-Apr-19-2012 , it's gonna be another hour, because where file was uploaded, download speed is so slow...........
I'm running on windows 7 x64
OMAP drivers still was bugged for me, eventho I tried lots of ways to fix it.
eventually, I used smart flash with 21e AP and CP and it flashes successfully
P.S. I do put back battery when flashing starts, otherwise ,it restarts at partition part!!!
about kzd just Google lge kdz ectractor and go read xbsalls ressurection thread again to fix omap flashing too fast.
sent from my lg o3d
a piece of advice:
don't ask alot ..go read.
Help!
I have the LG Security Error at boot. My phone doesn't even load drivers on my PC with Windows 7. Therefore, no fastboot option. I'm using LG Optimus L9. I got the error after trying to install a custom recovery that was supposed to be for a locked bootloader. I guess I may be screwed. Hope someone can help. Thanks!
Omap4430 driver error
daGUCCI said:
well OMAPFlash driver shows on programs and features, but it constantly connects disconnects OMAP4430 in device manager, tried to select folder, but it just disconnects to quick that it ignores my previously selected paths.
I can't flash it, because I can't find that start_fastboot app
/ another issue, if I ignore that OMAP4430 and just carry on step by step, change port to 41 for CDMA and open LGFlashTool.exe for , it just wont open, tried even on xp sp3, still nothing... it's 1.1 version.
^^^^^ scratch that, works now with 1.2 version
now have a question, If I have 170mb kdz for 21e, can I use it in FlashTool? Because to download BIN_LGP920AT-00-V21e-EUR-XXX-Apr-19-2012 , it's gonna be another hour, because where file was uploaded, download speed is so slow...........
I'm running on windows 7 x64
OMAP drivers still was bugged for me, eventho I tried lots of ways to fix it.
eventually, I used smart flash with 21e AP and CP and it flashes successfully
P.S. I do put back battery when flashing starts, otherwise ,it restarts at partition part!!!
Click to expand...
Click to collapse
I'm also having this same problem with my lg, it disconnect and connect from device manager menu.
And I can't flash it using lg flash tool because its not stable during read. Any solution to this ???????
Help, I cant root it nor use lg flash tool because the usb is recognized as cosmo driver and I need to find the driver software.
Also, I cant seem to get signal since I cant use lgflash tool to flash baseband... Any ideas how?
I can access the sd card though. When I remove the battery and pressed the Vol up button, the OMAP driver keep connect and disconnect too and I cant seemed to install it, I'm using windows 7 bytheway.
Baseband is not XBSA404 but instead its the original korean baseband. I can't flash any baseband too.
This doesn't belong here..
However...
Cosmo drivers = omap4430 drivers
so just install the omap drivers like you did before to flash ics.
Edit: for the connect/disconnect problem..
Just keep battery in, hold vol+ and connect usb (hold vol+ until you see s/w)
Sent from my P920 using XBSA ICS V5
Thanks
TMProduct1onZ said:
This doesn't belong here..
However...
Cosmo drivers = omap4430 drivers
so just install the omap drivers like you did before to flash ics.
Edit: for the connect/disconnect problem..
Just keep battery in, hold vol+ and connect usb (hold vol+ until you see s/w)
Sent from my P920 using XBSA ICS V5
Click to expand...
Click to collapse
Thanks, but I cant seemed to install the OMAP Driver even b4 installing ICS. It just says windows cannot find.... I tried doing this manually but still get the same respond. Also when I try to flash back to my original rom, it keep restarting it over and over again at lg logo. The Lg logo last abot halve a sec b4 restarting. So I did reflash back to ICS and it works. But still no network etc...
fadhli7 said:
Thanks, but I cant seemed to install the OMAP Driver even b4 installing ICS. It just says windows cannot find.... I tried doing this manually but still get the same respond. Also when I try to flash back to my original rom, it keep restarting it over and over again at lg logo. The Lg logo last abot halve a sec b4 restarting. So I did reflash back to ICS and it works. But still no network etc...
Click to expand...
Click to collapse
Some tips.
Need to use twrp recovery to install stuff. Cwm uses vol+, twrp vol- to enter recovery(or was it vice versa). Cwm old version doesnt work with xbsa404.
I had brick also, lg logo and reboot. WIn 7 found lg serial port. Used flashtool and change port to 41 or if it is that change to 42.
Then flasher should found lg and flash it.
To get network you need new kernel.
OK!
kalamake said:
Some tips.
Need to use twrp recovery to install stuff. Cwm uses vol+, twrp vol- to enter recovery(or was it vice versa). Cwm old version doesnt work with xbsa404.
I had brick also, lg logo and reboot. WIn 7 found lg serial port. Used flashtool and change port to 41 or if it is that change to 42.
Then flasher should found lg and flash it.
To get network you need new kernel.
Click to expand...
Click to collapse
The thing is when I flash to ICS, my recovery is gone plus after I reflashed to ICS, the phone will froze for a few seconds and then back to normal. This keeps repeating.... Also if ur talking abt rooting, I cant coz it says invalid ap path.
fadhli7 said:
Help, I cant root it nor use lg flash tool because the usb is recognized as cosmo driver and I need to find the driver software.
Also, I cant seem to get signal since I cant use lgflash tool to flash baseband... Any ideas how?
I can access the sd card though. When I remove the battery and pressed the Vol up button, the OMAP driver keep connect and disconnect too and I cant seemed to install it, I'm using windows 7 bytheway.
Baseband is not XBSA404 but instead its the original korean baseband. I can't flash any baseband too.
Click to expand...
Click to collapse
I dont really understand where you stuck exactely and what you did but regarding the cosmo driver:
To install the cosmo drivers for windows xp I downloaded and installed the lg pc suite software ver. 4 something and my phone was connected to the pc under software installation.
For win 7 64bit the driver was automatically installed by windows but you can try lg pc suite with win 7 too.
Sent from my GT-N8000 using XDA Premium HD app
ferel said:
I dont really understand where you stuck exactely and what you did but regarding the cosmo driver:
To install the cosmo drivers for windows xp I downloaded and installed the lg pc suite software ver. 4 something and my phone was connected to the pc under software installation.
For win 7 64bit the driver was automatically installed by windows but you can try lg pc suite with win 7 too.
Sent from my GT-N8000 using XDA Premium HD app
Click to expand...
Click to collapse
Whenever I wanna root my phone, it says cannot find specific file or folder. Plus I can install wkpark boot because I cant install the OMAP driver eventhough I directed it manually. When I tried on other laptop, I managed to successfully install the driver, but it still connect and disconnect ( u can hear by the sound ).
fadhli7 said:
Whenever I wanna root my phone, it says cannot find specific file or folder. Plus I can install wkpark boot because I cant install the OMAP driver eventhough I directed it manually. When I tried on other laptop, I managed to successfully install the driver, but it still connect and disconnect ( u can hear by the sound ).
Click to expand...
Click to collapse
What do you do exactely and what is the error message exactely pls.
For the root you need the lge cosmo driver.
It is correct this wy... connect and disconnect all the time. It means it is ok if you installed the driver.
To install those omap drivers you either needs to be fast to click on them when the ti omap appears or there is a solution to see the already attached devices in thr windows decice list, I saw it somewhere here but i do not remember in which thread.
Sent from my GT-N8000 using XDA Premium HD app
you can get OMAP4430 driver by downloading wkparks fastboot loader from http://forum.xda-developers.com/showthread.php?t=1971014
extract it and you should find it on usb_drv_windows
to install it you can follow this guide http://forum.xda-developers.com/showpost.php?p=32955612&postcount=3 which taken from http://forum.xda-developers.com/showthread.php?t=1942836
good luck
satubsatub said:
you can get OMAP4430 driver by downloading wkparks fastboot loader from http://forum.xda-developers.com/showthread.php?t=1971014
extract it and you should find it on usb_drv_windows
to install it you can follow this guide http://forum.xda-developers.com/showpost.php?p=32955612&postcount=3 which taken from http://forum.xda-developers.com/showthread.php?t=1942836
good luck
Click to expand...
Click to collapse
Yup, I tried installing the driver many times but to no avail... Thanks for the help anyway... :good:
Help, I mananged to install the omap driver but it keep connect and disconnect... So now I cant root it or install recover because there's error with the OMAP. I'm currently using ported SU760 for P920. I cant event flash a baseband. When I flash it, the baseband isnt Xball but the original korean baseband. So I seriously need help...
fadhli7 said:
Help, I mananged to install the omap driver but it keep connect and disconnect... So now I cant root it or install recover because there's error with the OMAP. I'm currently using ported SU760 for P920. I cant event flash a baseband. When I flash it, the baseband isnt Xball but the original korean baseband. So I seriously need help...
Click to expand...
Click to collapse
I previously had continuing connect-disconnect cycle. But I managed to install all the drivers and connect to my P920.
It's possible wrong drivers has been installed, try to uninstall them all and restart your PC.
Are you Using Windows 7? try XP.
Make sure that the battery is taken out and you press and hold Volume+ button for several seconds while plugging your USB.
If you open Device Manager you can see OMAP4430- device appearing and disappearing. Try to rightclick on it when it's appearing (takes some practice) and then select properties in popup menu. Then Uninstall device from properties and update drivers to factory LG and Texas Instrumental USB drivers.
If nothing works you might want to try USB JIG cable with 910K resistor.
Good luck!
Thank You ^^D
3dimka said:
I previously had continuing connect-disconnect cycle. But I managed to install all the drivers and connect to my P920.
It's possible wrong drivers has been installed, try to uninstall them all and restart your PC.
Are you Using Windows 7? try XP.
Make sure that the battery is taken out and you press and hold Volume+ button for several seconds while plugging your USB.
If you open Device Manager you can see OMAP4430- device appearing and disappearing. Try to rightclick on it when it's appearing (takes some practice) and then select properties in popup menu. Then Uninstall device from properties and update drivers to factory LG and Texas Instrumental USB drivers.
If nothing works you might want to try USB JIG cable with 910K resistor.
Good luck!
Click to expand...
Click to collapse
Thanks for the help, but I somehow managed to revert back to stock GB though the download mode ( press and hold Volume+ button) is still in korean. Know how to change it back to normal?
fadhli7 said:
Help, I mananged to install the omap driver but it keep connect and disconnect... So now I cant root it or install recover because there's error with the OMAP. I'm currently using ported SU760 for P920. I cant event flash a baseband. When I flash it, the baseband isnt Xball but the original korean baseband. So I seriously need help...
Click to expand...
Click to collapse
i use win7, ICS v30b (xbsall ported ICS rom from su760) and just follow this guide to solve that problem, you also free to try it..
you can get OMAP4430 driver by downloading wkparks fastboot loader from http://forum.xda-developers.com/show....php?t=1971014
extract it and you should find it on usb_drv_windows
to install it you can follow this guide http://forum.xda-developers.com/show...12&postcount=3 which taken from http://forum.xda-developers.com/show....php?t=1942836
good luck :laugh:
one question >>> "When I flash it, the baseband isnt Xball but the original korean baseband" what is the original korean baseband that wrote there???
I need help with my lg g stylo. I was using one click root Kingo root and when it was 66% done it was rebooting my phone into firmware download and my computer running Windows 10 froze to where I had to hard reset it, and my phone froze on firmware update. Now my phone is stuck in a bootloop on the LG life's good screen, I've tried hard resetting it ( with the volume down and power button combo) the Android guy pops up for one millisecond and disappears going back to the LG screen not doing anything the only other the only other thing I can do is go into downloading mode( while connected to a computer hold the volume button up) but when I do that my computer does not recognize my phone saying code 10 device cannot start up I have called LG they refused to help me get into recovery mode I have called Google Android support they don't know how to help I have also called windows trying to see if it was my computer's fault and they decided it wasn't I am kind of out of options I'm hoping someone knows how to help me I'll appreciate any help I can get thank you.
You need to download a MetroPCS KDZ and use rhe LG Flash Tool to flash the KDZ and bring your phone back to life.
I've tried that already I keep getting a Windows error code 10 device cannot power on I contacted windows and they said that is not my computer that is my device I have reinstalled my driver's serval times
Blairmathew071213 said:
I've tried that already I keep getting a Windows error code 10 device cannot power on I contacted windows and they said that is not my computer that is my device I have reinstalled my driver's serval times
Click to expand...
Click to collapse
To get into download mode you need make sure phone is 100% powered off then hold the volume up button and then plug in the usb cable. Dont release the power up button until the phone is fully in download mode not just the first screen. Also search for your phones adb drivers and install them to your pc not just the usb drivers. Make sure to uninstall any existing drivers first.
Thediesel1972 said:
To get into download mode you need make sure phone is 100% powered off then hold the volume up button and then plug in the usb cable. Dont release the power up button until the phone is fully in download mode not just the first screen. Also search for your phones adb drivers and install them to your pc not just the usb drivers. Make sure to uninstall any existing drivers first.
Click to expand...
Click to collapse
ok thank you i havent installed adb drivers yet ill let you know what happens
Blairmathew071213 said:
ok thank you i havent installed adb drivers yet ill let you know what happens
Click to expand...
Click to collapse
still not connecting to my pc uninstalled my usb drivers and reinstalled them and the adb drivers for my device my pc says " this device cannot start (code: 10)"
Blairmathew071213 said:
still not connecting to my pc uninstalled my usb drivers and reinstalled them and the adb drivers for my device my pc says " this device cannot start (code: 10)"
Click to expand...
Click to collapse
Did you try another pc with the adb drivers installed to see if you get the same error? If it connects on a different pc try this on the problem pc.
Open task manager
Click on the Hardware tab
Click the Device Manager button.
Expand Universal Serial Bus controllers section.
Right-click every device under the Universal Serial Bus controllers node, and then click Uninstall to remove them one at a time.
Restart the computer, and allow the computer to reinstall the USB controllers.
Plug in the your phone in download mode and test to to see if the issue is resolved.
You can also download Ccleaner and fix any registry errors for free. I've used it for years and it works really well.
Still no joy. Try a system restore on your pc sounds like the device management could be screwed up.
All kinds of funky sh*t can happens when a pc crashes. You said you have windows 10 as a last resort you can do a system refresh which reinstalls the os but keeps your files.
Thediesel1972 said:
Try a system restore on your pc sounds like the device management is screwed up. Also you can download Ccleaner and fix any registry errors for free. I've used it for years and it works really well. All kinds of funky sh*t can happen when a pc crashes. You said you have windows 10 as a last resort you can do a system refresh which reinstalls the os but keeps your files. Id try ccleaner first.
Did you try another pc to see if you get the same error?
Click to expand...
Click to collapse
yes ive plugged it into a pc running win 7 and i already did a pc reset i did the option to clean everything im thinking about formatting my hard drive and do a clean install of windows ill look into the ccleaner and see if that helps ill let you know what happens thank you
Blairmathew071213 said:
yes ive plugged it into a pc running win 7 and i already did a pc reset i did the option to clean everything im thinking about formatting my hard drive and do a clean install of windows ill look into the ccleaner and see if that helps ill let you know what happens thank you
Click to expand...
Click to collapse
Did you check my edited post?
Thediesel1972 said:
Did you check my edited post?
Click to expand...
Click to collapse
yes i did and still nothing but i think i found a way through android studio
Android SDK manager cannot find my device either I tried looking it up to my port and USB locator
Everything you need can be found here in the LG G Stylo forums and if it's not here a google search will help.
You need...
MetroPCS 5.1.1 KDZ
LG drivers
LG Flash Tool
Download the KDZ. Install the LG drivers while you wait for the 1.2GB KDZ to be downloaded. Download the LG Flash Tool and when the KDZ has completed downloading run it as an administrator. Settings in Flash Tool should be fine. Point to the KDZ and begin the flash. Normal or CSE. Normal does not wipe data, CSE wipes all user data. You'll be prompted with something about your internet connection. Do not close this, the tool should be flashing the KDZ. Wait for the phone to be rebooted after flashing. Profit.
Mattix724 said:
Everything you need can be found here in the LG G Stylo forums and if it's not here a google search will help.
You need...
MetroPCS 5.1.1 KDZ
LG drivers
LG Flash Tool
Download the KDZ. Install the LG drivers while you wait for the 1.2GB KDZ to be downloaded. Download the LG Flash Tool and when the KDZ has completed downloading run it as an administrator. Settings in Flash Tool should be fine. Point to the KDZ and begin the flash. Normal or CSE. Normal does not wipe data, CSE wipes all user data. You'll be prompted with something about your internet connection. Do not close this, the tool should be flashing the KDZ. Wait for the phone to be rebooted after flashing. Profit.
Click to expand...
Click to collapse
Thats not his problem its his pc read the prior posts
I had the same problem once the device connected as download mode.
The kdz tool doesn't detected and crashed all the times. But miracle happens I kept playing(open&close)the kdz tool app. Somehow it detected and flash the kdz.
Android Studio was a bust still unable to find my device even with the code to direct information to the only USB device connected
Shimster said:
I had the same problem once the device connected as download mode.
The kdz tool doesn't detected and crashed all the times. But miracle happens I kept playing(open&close)the kdz tool app. Somehow it detected and flash the kdz.
Click to expand...
Click to collapse
I'll try that and see if it works thank you
Did you ever try a different pc and if so was it detected by windows
Thediesel1972 said:
Did you ever try a different pc and if so was it detected by windows
Click to expand...
Click to collapse
Yes I've tried and computer running windows 7. Adb cannot find my device.
Blairmathew071213 said:
Yes I've tried and computer running windows 7. Adb cannot find my device.
Click to expand...
Click to collapse
I was under the impression that the phone was entering dl mode but just not getting recognized by the pc. Either or you should bring it to a corporate store and tell them it boot looped while updating and play dumb. They should replace it since its under warranty. Or call lg and do it that way although its about a ten day wait.
Thediesel1972 said:
I was under the impression that the phone was entering dl mode but just not getting recognized by the pc. Either or you should bring it to a corporate store and tell them it boot looped while updating and play dumb. They should replace it since its under warranty. Or call lg and do it that way although its about a ten day wait.
Click to expand...
Click to collapse
My phone does enter download mode just can't do anything from there. ADB can't find device. I even found the port I'm in and tried to force into recovery but still no device connected.