Hello, I got flytouch from friend, but tablet is dead. Tablet don't respond for anything. I tried something keys (and combination keys), but nothing. What can I do? Do you can help me, please?
Very thank you, I tried very much totorials from google, but really nothing.
Please, help me.
I tried tutorial from slatedroid.com (topic number: 25748, name firmware-flytouch-superpad-6-vi-v10-cortex-a8-vimicro/), but when I press menu and power on, tablet don't make anything. Only when I have got tablet connected with PC, on my monitor show new memory (from tablet).
How can I do flash? Or repair tablet?
Thank you
Please, help me. I'm waiting for reply ;(.
Related
I was not able to start the windows after I tried a software. The screen goes off after I saw the windows logo. And I searched in the forum, someone asked also the same question but without answers. So please if someones konws how to hard reset the phone, give a instruction for this. Thanks in advance!
life saver
yes. I can.
hold: left soft key + red hang up key
and then power on
wait a second, you will see the screen displayes clear storage..
and done.
Vodafone VDA- Toshiba g710
Hi,
First of sorry for my english
I have tosgiba g710 phone. I have upgraded ROM (Windows standard 6.1). Now I have a problem, it shows NO Service after inserted SIM card.
Pls. Help
Thanks in advance.
Hi.
I got a Proscan PLT-7223-G tablet for really cheap (free.)
It's actually not bad (yeah, yeah...), and runs most things that I've tried fairly well (had some stuttering playing Tomba! but eh...)
Thing is... I want to be able to do a few things that I need root for.
So far, I have found nothing about this tab. It's running a RK2928, has JB 4.1.1, and that's it.
There are no hard keys, so I can't even use recovery mode (even though I can get to it through adb...)
Everything I have tried to do to root it has failed. Auto-rooting programs hang. Manual rooting gives me permission errors (probably the cause of failed everything else,) and I don't really know enough to figure this out on my own.
So... Anyone out here have any help for this mystery tab? Or at least be able to point me in some new direction? Or even just let me know how to use recovery without buttons?
Thanks in advance.
So, I've kept trying to figure things out to see if it's a clone of something else. It seems the same as the IPPO K7, but I don't know the GPU on mine since it just says "Super 3D GPU" on it. And the IPPO K7 root kit gives me errors about not being able to access folders..
PLT-7223G ADB Connection
Kurobei, I know its been two months since your post but I'm hoping you will reply. I also have a PLT-7223G tablet that I have been trying to connect to using ADB. I have stumbled through windows XP "New Hardware Found" and managed to get "Android ADB Interface" to load when I plug in the Tablet. But ADB DEVICES returns nothing. I have the latest ADB version of 1.0.31. I have added these lines to android_winusb.inf
;ProScan plt-7223g
%SingleAdbInterface% = USB_Install, USB\VID_16d5&PID_8005
%CompositeAdbInterface% = USB_Install, USB\VID_16d5&PID_8005&REV_0222
under both [Google.NTx86] & [Google.NTamd64]
Do you have any tips?
---------- Post added at 08:14 PM ---------- Previous post was at 07:51 PM ----------
Never mind. I found my error. In C:\Documents and Settings\User\.android\adb_usb.ini I was using an "o" instead of a"0" for the line "0x16d5".
All better
hard reset
Kurobei said:
Hi.
I got a Proscan PLT-7223-G tablet for really cheap (free.)
It's actually not bad (yeah, yeah...), and runs most things that I've tried fairly well (had some stuttering playing Tomba! but eh...)
Thing is... I want to be able to do a few things that I need root for.
So far, I have found nothing about this tab. It's running a RK2928, has JB 4.1.1, and that's it.
There are no hard keys, so I can't even use recovery mode (even though I can get to it through adb...)
Everything I have tried to do to root it has failed. Auto-rooting programs hang. Manual rooting gives me permission errors (probably the cause of failed everything else,) and I don't really know enough to figure this out on my own.
So... Anyone out here have any help for this mystery tab? Or at least be able to point me in some new direction? Or even just let me know how to use recovery without buttons?
Thanks in advance.
Click to expand...
Click to collapse
I have the same tablet I have a question How do you do a hard reset or do a factory reset there is no volume buttons on this tablet
Kurobei said:
Hi.
I got a Proscan PLT-7223-G tablet for really cheap (free.)
It's actually not bad (yeah, yeah...), and runs most things that I've tried fairly well (had some stuttering playing Tomba! but eh...)
Thing is... I want to be able to do a few things that I need root for.
So far, I have found nothing about this tab. It's running a RK2928, has JB 4.1.1, and that's it.
There are no hard keys, so I can't even use recovery mode (even though I can get to it through adb...)
Everything I have tried to do to root it has failed. Auto-rooting programs hang. Manual rooting gives me permission errors (probably the cause of failed everything else,) and I don't really know enough to figure this out on my own.
So... Anyone out here have any help for this mystery tab? Or at least be able to point me in some new direction? Or even just let me know how to use recovery without buttons?
Thanks in advance.
Click to expand...
Click to collapse
Perhaps this is late, but I got the same tablet two weeks ago. Look at this other post for info on rooting it: http://forum.xda-developers.com/showthread.php?t=2450480
Helping a colleague
jfmajo said:
Perhaps this is late, but I got the same tablet two weeks ago. Look at this other post for info on rooting it: http://forum.xda-developers.com/showthread.php?t=2450480
Click to expand...
Click to collapse
So, a colleague has this tablet and I was looking for options to root and landed on this thread. Thanks for pointing us the right way.
jfmajo said:
Perhaps this is late, but I got the same tablet two weeks ago. Look at this other post for info on rooting it: http://forum.xda-developers.com/showthread.php?t=2450480
Click to expand...
Click to collapse
I had pretty much given up on rooting this, and then, for whatever reason, decided to look at this thread...
I've all but given up and then you have to go and make me very happy with it.
Thanks a ton. I've now got the thing rooted and am no longer stuck with only 4gb of internal space, among other things!
Unlocking/Resetting PROSCAN PLT 7233G
Hello,
I am trying to fix a tablet (Proscan PLT 7223 G) for a friend of mine. They bought it off a television network and when they turned it on, it required a passcode (requires letter and/or numbers). I have tried MANY methods, from resestting it through the pinhole in the back of the device. Even trying various programs that can unlock the tablet via PC. I think the main issue is that the tablet's usb debugging setting is not on. And with that not being on, I can't do anything on command prompt. I really need some assistance on unlocking this tablet. I have been trying for days and even searching xda and google for any solutions that may come up. Didn't think this would be an issue but it has now. Would greatly appreciate any ideas or methods to unlocking the tablet OR activating USB debugging via PC command prompt with the tablet's password.
Thanks,
EzE601
PLT7223g Recovery
Recovery System: v4.1.01 Android System Recovery <3e>
Enter recovery: Turn power off by holding power button down for extended period. Menu comes up and asks if you want to power off or cancel. Choose “OK” to power off.
Insert pin in update hole and hold power button down simultaneously until Proscan splash screen is displayed. “Fallen Android spilling red exclamation mark” comes up in a few seconds. Simultaneously depress pin and power button briefly, release, do this several times until recovery menu comes up.
Move menu selection by depressing pin.
Menu provides numerous options for rebooting, applying an upgrade and factory reset.
Hi there,
I am having an issue and dont know if it is here that i should post this problem... I did the hard reset on my android tablet, but unfortunaly it got stuck on the formatting data loading screen... I made a lot of research and i don't know what to do with this.. I am writting here in the hope that i can get some help from you..
I will post here a link how is my tablet stuck.. ever since when i turn it on, that loading screen never passes from there..
Please, i need some help if you can.. This is happening since i tried to make a hard factory reset from the android menu pressing the volume and power key, and it never changed becase the process got stuck. When i press the touch buttons by the side, it shows activity because the lights turn on.. Thats why i think my issue with this tablet has a solution..
If you can help me with my problem i proudly say that i can give you some money for the help that you could give to me.
And theres another issue, when i connect my tablet to the pc, my windows sounds like i was connecting a device to it, but it doesn't recognize anything.
Bq Kepler 1 is the model of the tablet.
The Specs of the tablet are
Android 2.3 GingerBread
resolution: 800 x 600 - 8"
processor: Cortex A8 1 GHZ
Best Regards and watting for your reply,
Afonso Carreira
We do not have a forum for your device. Please post your query in
General discussion > Questions and Answers
So that the right experts may help.
A couple of days ago, I was trying to get Google Play on the tablet so that I can play the games I bought since it is slightly faster and has a larger screen than my phone. After unsuccessfully jumping through various hoops, I went to clockwork it. First, I attempted to make a back-up, but looking back on it, I don't think it worked because I never got any type of confirmation. Then, with the firmware image on the extSD, I started up the clockwork. In the recovery menu, I formatted the data, but the tablet slipped out of my hands and hit the floor, jostling the battery and turning the tablet off.
Now, if I try the vol+ POW button combo, I just get a black screen. My computer understands that something was plugged in, but adb and fastboot can't find the device. If I try just starting it up normally, all it shows is the Android character standing there doing nothing. I have been trying to get this thing back up and running with any type of ROM I could, but nothing seems to locate the device except for Livesuit, but when I select a ROM for it to load, the application stops working and closes out. So I am at a complete loss at what to do.
Tablet information
Trio Stealth Pro 7c
Allwinner A13
Device ID: VID_1f3a_PID_efe8
Original Android version: 4.0.4
That's all the information I have currently, if you need anything else, please let me know and I will try to find it out.
Thank you for reading!
bennimarru said:
A couple of days ago, I was trying to get Google Play on the tablet so that I can play the games I bought since it is slightly faster and has a larger screen than my phone. After unsuccessfully jumping through various hoops, I went to clockwork it. First, I attempted to make a back-up, but looking back on it, I don't think it worked because I never got any type of confirmation. Then, with the firmware image on the extSD, I started up the clockwork. In the recovery menu, I formatted the data, but the tablet slipped out of my hands and hit the floor, jostling the battery and turning the tablet off.
Now, if I try the vol+ POW button combo, I just get a black screen. My computer understands that something was plugged in, but adb and fastboot can't find the device. If I try just starting it up normally, all it shows is the Android character standing there doing nothing. I have been trying to get this thing back up and running with any type of ROM I could, but nothing seems to locate the device except for Livesuit, but when I select a ROM for it to load, the application stops working and closes out. So I am at a complete loss at what to do.
Tablet information
Trio Stealth Pro 7c
Allwinner A13
Device ID: VID_1f3a_PID_efe8
Original Android version: 4.0.4
That's all the information I have currently, if you need anything else, please let me know and I will try to find it out.
Thank you for reading!
Click to expand...
Click to collapse
Man, that's some really bad luck you got there. My sympathies.
However, I was unable to find much support for your device on XDA, and I also think you may have bricked it pretty bad. my advice would be to try a visit to the service centre to get it fixed.
If you want to do it yourself though, visit this thread and see if you can figure it out: http://forum.xda-developers.com/android
FIXED!
Thank you thank you thank you! Your reference to search those forums led me to someone fixing their bricked tablet. Since the Trio was so similar to theirs, I tried it as well, and it worked!
For any one else looking for a fix for their own Chinese Trio Stealth Pro 7c tablet, got here - http://forum.xda-developers.com/showthread.php?t=2537189
bennimarru said:
Thank you thank you thank you! Your reference to search those forums led me to someone fixing their bricked tablet. Since the Trio was so similar to theirs, I tried it as well, and it worked!
For any one else looking for a fix for their own Chinese Trio Stealth Pro 7c tablet, got here - http://forum.xda-developers.com/showthread.php?t=2537189
Click to expand...
Click to collapse
I'm glad you figured it out. Congratulations!
Thread closed.
My tablet is stuck in a bootloop and since I had never connected it to the PC before I haven't turned on "USB Debugging Mode" .
Is there any way that I can connect my tablet to the PC without this option being selected so that I can try a factory reset.
Also it is an unbranded tablet so none of the shortcuts (eg. hold power button and vol+ ) work.
Any help is appreciated thanks.
Hi
Thanks for writing to us at XDA Assist. Unfortunately there's really not much we can do when it comes to unbranded devices such as this, there's just no information available for them which makes them pretty much impossible to troubleshoot. Sorry to be the bearer of bad news.
Good luck!
All I know is that its a Chinese tablet KV78PH-21. Is that of any help to you?
Unfortunately not, like I said there's really nothing that we can do to help you unfortunately. Sorry, and good luck with your phone.
Thread closed, thanks.