Database Info

i-Blason Clear Hard Snap-on Case

For those looking for cases, these are pics of my just received "i-Blason Clear Hard Snap-on Case for Google Nexus 4 Smart Phone (Crystal Clear)". Snaps on just fine, doesn't protect the top or bottom of the phone, but protects the back and sides just fine. I love knowing it's more protected than naked, but still able to show off the phone in all its glory and shiny back! Yeah, the plastic scratches easily, but how cares. It was just $10, so I might order more just for spares.
I got the case from here: http://www.amazon.com/i-Blason-SoftGel-Flexible-Frost-Clear/dp/B009Y0ZH6Y

Antebios said:
For those looking for cases, these are pics of my just received "i-Blason Clear Hard Snap-on Case for Google Nexus 4 Smart Phone (Crystal Clear)". Snaps on just fine, doesn't protect the top or bottom of the phone, but protects the back and sides just fine. I love knowing it's more protected than naked, but still able to show off the phone in all its glory and shiny back! Yeah, the plastic scratches easily, but how cares. It was just $10, so I might order more just for spares.
I got the case from here: http://www.amazon.com/i-Blason-SoftGel-Flexible-Frost-Clear/dp/B009Y0ZH6Y
Click to expand...
Click to collapse
Just noticed this case myself on Amazon, which cued me in that the Chinese are finally cranking these long awaited crystal clear cases en masse. Just ordered mine from here for $4: http://www.ebay.com/itm/251200525677?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
$10 is a rip for these cheaply made crystal clear cases that scratch if you so much as look at it sidewise. I am surprised that i-Blason didn't plaster their logo all over the back like they did with their TPU cases, at least there's that.

Elsydeon said:
Just ordered mine from here for $4: http://www.ebay.com/itm/251200525677?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Click to expand...
Click to collapse
It's not the exact same one, just slightly different. But, it's close enough. Holy **** that's cheap!

Elsydeon said:
Just noticed this case myself on Amazon, which cued me in that the Chinese are finally cranking these long awaited crystal clear cases en masse. Just ordered mine from here for $4: http://www.ebay.com/itm/251200525677?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
$10 is a rip for these cheaply made crystal clear cases that scratch if you so much as look at it sidewise. I am surprised that i-Blason didn't plaster their logo all over the back like they did with their TPU cases, at least there's that.
Click to expand...
Click to collapse
Thanks i ordered this.
Sent from my Nexus 4 using xda app-developers app

If only it was available on Amazon uk, it's a good price on eBay but delivery will be like a month so I'm not sure, shipping also costs

Was never a fan of crystal clear cases, but they actually look good on the Nexus 4
Sent from my Nexus 4 using xda app-developers app

Elsydeon said:
Just ordered mine from here for $4: http://www.ebay.com/itm/251200525677?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Click to expand...
Click to collapse
You posting the link must have sold them out cause now it says that item has been removed or is no longer available. Damn
Sent from my Nexus 4 using Tapatalk 2

Link is working now. Seems like a cheap way to keep the look of the phone while getting a bit more protection.
Sent from my Nexus 4 using xda app-developers app

Crystal clear cases almost always results in scratches on the body....just be careful.

PoisonWolf said:
Crystal clear cases almost always results in scratches on the body....just be careful.
Click to expand...
Click to collapse
Which body? Plastic case or Nexus phone?
Sent from my Nexus 4 using xda app-developers app

Antebios said:
Which body? Plastic case or Nexus phone?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Every crystal case I've owned in the past for various devices....over time, stuff builds up between the case and the phone. It'll scratch either depending on the content of the "stuff".
Just make sure you clean it regularly.

Good thing i have a full body skin coming in the mail already.

Dang, that looks so much better than the clear S-wave TPU case, it's not even funny.

Antebios said:
For those looking for cases, these are pics of my just received "i-Blason Clear Hard Snap-on Case for Google Nexus 4 Smart Phone (Crystal Clear)". Snaps on just fine, doesn't protect the top or bottom of the phone, but protects the back and sides just fine. I love knowing it's more protected than naked, but still able to show off the phone in all its glory and shiny back! Yeah, the plastic scratches easily, but how cares. It was just $10, so I might order more just for spares.
I got the case from here: http://www.amazon.com/i-Blason-SoftGel-Flexible-Frost-Clear/dp/B009Y0ZH6Y
Click to expand...
Click to collapse
Is that the wrong link? That one is Frost Clear, not Crystal Clear, and it's a soft gel case, not a hard snap-on case.

grayson73 said:
Is that the wrong link? That one is Frost Clear, not Crystal Clear, and it's a soft gel case, not a hard snap-on case.
Click to expand...
Click to collapse
That's the correct link, but they have modified their listing. When I purchased mine, there was no "Pink". "Clear" was where "Pink" was. There is a link in this thread to an eBay listing that has the clear case much cheaper ($4).

I got the same case 2 weeks ago- so far, so good! First crystal clear case that I like

My clear case is now scratched up, but who gives a **** because I would rather it get messed up than my beautiful N4. I'll just order a cheap replacement down the road.

[Review] Exact Armor Case

Hey guys,
I just wanted to give a short review of a case I'm using, because I absolutely love it. It's the Exact Armor Case.
I bought it a week and a half ago, at the time it was only $3.95, at the time of me writing this it is $7.95 on Amazon. It's VERY similar to the Ionic Guardian Armor Case. There was some concern because I believe that on Amazon this case in the pictures doesn't show a cut out on the back for the speaker, but it does indeed have one.
It feels really good in the hand. I wasn't sure how I was going to feel about the dots on the back, but they ended up not being bad, and really make it so the phone doesn't slide out of your hand/off a table when you are holding it/sitting it down. I also have an i-Blason TPU case and I liked it but wanted something with a little bit more protection. I love the rubbery cover on the buttons on the Exact case, it makes it incredibly easy to push those buttons, which were more difficult to push on the i-Blason case in my opinion.
It feels really good and sturdy in the hand, and I love the way it feels. It doesn't add any more then the i-Blason case does when you're holding it in my opinion, except for on the corners, but you don't really notice those when holding it. All of the ports (mini USB and headphones) are accessible, however when I tried to plug a headphone jack from my car in it was a little too big and didn't fit in the hole cut in the case, but using a pair of headphones fits just fine.
I'm usually rough on phones, and so I wanted to get a sturdy case until hopefully an Otterbox comes out, which I will then buy and see if I like it more then this case. I HAVE dropped my phone twice over the past 72 hours or so using the case, and there was no damage to the phone. Once was getting out of my car and the phone fell onto gravel, and the second was just when I was pulling it out of my pocket I dropped it. (Yes, I'm clumsy, and I need to try harder to keep it safe.) There is no damage at all to the phone.
The front of the case does slide over the front, so you can sit the phone screen down and it doesn't touch whatever is underneath it. There is a small lip there, but so far it hasn't deterred me in anyway touching the screen/typing/swyping.
Please feel free to ask any questions, I'll be more then happy to answer. And before anyone asks, I just put on a Xtremeguard Screen Protector on literally 5 minutes before I took the pictures, so if the screen looks weird that's why, as it has to dry out and such.
If anyone asks, I can also talk about the i-Blason case a little.
I can't post links to the cases above because I don't have 10 posts yet :/ Just search on Amazon, you'll find them all, and after I post 10 times I'll come back and add the links in.

Amazon link: http://www.amazon.com/Exact-Armor-Google-Nexus-Smart/dp/B00AAKM44K
I have this case also. For such a bargain I'm astounded by its quality. :good:

Who knows when an otterbox will come out, I think I will get this one until then

ccs1676 said:
Who knows when an otterbox will come out, I think I will get this one until then
Click to expand...
Click to collapse
Nobody knows for sure but like most of the stuff in production you can probably expect it will be released before the end of January.
I think chances are you will get this one and then decided (unless you some how destroy it) that you don't want to shell out for an Otterbox.

theTqM said:
I have this case also. For such a bargain I'm astounded by its quality. :good:
Click to expand...
Click to collapse
Thanks for posting the link! Gotta start posting more and stop lurking so much It's amazing quality, especially since I got it when it was only $4.
ccs1676 said:
Who knows when an otterbox will come out, I think I will get this one until then
Click to expand...
Click to collapse
It's terrific quality, and super cheap, and who knows, even if Otterbox comes out with one, I like this one an awful lot!

I would really like to get this case but the shipping to Canada kills the deal. $13 is more than the case itself. Anyone know if someplace else sells this case? EBay has nothing.
Sent from my Nexus 4 using Tapatalk 2

Ew.... *gags*
Sent from my Nexus 4

theTqM said:
Nobody knows for sure but like most of the stuff in production you can probably expect it will be released before the end of January.
Click to expand...
Click to collapse
Only there's no Otterbox case in production for the Nexus 4. Alas.

I got this case when it was $3.95 as well, great deal.
My TPU case was causing problems with my Skinomi screen protector but no problems with this case.

I currently have this case on... It sometimes lifts my xo skin screen protector so I have to push the screen protector down. For those who need even more protection there is a case on ebay called the Rugged Hybrid case, for 10-12 buck. The case is a beast but I'm waiting for someone to review on it before I purchase one.
Sent from my Nexus 4 using xda app-developers app

Sparta507 said:
I currently have this case on... It sometimes lifts my xo skin screen protector so I have to push the screen protector down. For those who need even more protection there is a case on ebay called the Rugged Hybrid case, for 10-12 buck. The case is a beast but I'm waiting for someone to review on it before I purchase one.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Is the lift because of the slight inward flex around the edges that one gets when gripping the phone? or is it always in contact with the XO?

theTqM said:
Is the lift because of the slight inward flex around the edges that one gets when gripping the phone? or is it always in contact with the XO?
Click to expand...
Click to collapse
It's because of the inward flex around the edges when I grip it. It does seem like the case is always in contact with it, but doesn't pull up the protector unless I grip it tight or push on it.
Sent from my Nexus 4 using xda premium

Just received my case earlier today and I have to say it may be my favorite. I own the iBlason in black, Diztronic TPU in black as well as the Cruzerlite Androidified in white. The price vs. protection offered is astounding. I have to say it is very much comparable to my parents Ballistic Shell Gel Series case they both have on their Galaxy S III. The material isn't quite as "nice" as the Ballistic but for a $7 case, comparing it to a $30 from Ballistic or $15 on Amazon, it is certainly a no brainer.
Nexus 4 Ballistic Case (yet to be released):http://www.goballisticcase.com/products/lg-nexus-4-ballistic-shell-gel-sg-series-case

Anyone want to comment on whether the case grips your pocket? That's the only thing holding me back from pulling the trigger on this over the diztronic you case.

masterchung89 said:
Anyone want to comment on whether the case grips your pocket? That's the only thing holding me back from pulling the trigger on this over the diztronic you case.
Click to expand...
Click to collapse
Mine is fairly easy to pull out of my pocket. I don't wear super tight pants, but if I did it might be a problem. The rubbery part on the case is a lint magnet when you put it in your pocket but it isn't bad putting in or pulling out.
Sent from my Nexus 4 using xda premium

tmhiott said:
Mine is fairly easy to pull out of my pocket. I don't wear super tight pants, but if I did it might be a problem. The rubbery part on the case is a lint magnet when you put it in your pocket but it isn't bad putting in or pulling out.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
I can wholly say the same.

Ordered. Guess I'll soon find out :fingers-crossed:

I have this too. I like it so far
Sent from my Nexus 4 using xda app-developers app

[Review]Acase dual layer Case

First, the case's full name is Acase Superleggera Pro Hybrid dual layer Case for LG Google Nexus 4.
Link on amazon.com: http://www.amazon.com/gp/product/B00B4I2GJU/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
FOr me, the seller shipped from IN, I dont know if they have any other branch. IAmazon said it would be delivered on Thursday, but I have received it on Wednesday.
I am not good at English, so I will use a lot of images to review this case.:laugh: I also take picture the case with the Nexus 4 adapter, so you can compare the demensions.
The case fit perfectly to the phone.
The case has two layers which are seperated. One is soft and one is hard.
I have a back, front and body wet-protector, and this case haven't peel my protector yet. Hopefully it won't. However, with a soft cover, I dont think it will peel any corner off.
THe back of the hard part is smooth. Hence slippery or not, I think it depends on each person. For me, it's not slippery. But the fact is it's smooth, so it can fall off your hand if you're not careful.
Buttons can be used very easily.
I dont have a Wifi charger in case someone ask me for this.
Last thing, any grammar error?
EDIT and WARNING: Because this case has a ruber layer (it has two layers: the soft ruber one and the hard one), it collects dust very easy, especially when you put it in your jeans' pocket. This is no problem to me, with a fiber or tape, I can easily remove them.
I also confirm again, this case doesn't peel the corner of your screen protector off.
However, with the Ballistic one, it will peel your corner off very easily because the top and bottm of the ballistic aren't fixed. I have borrowed the Ballistic one from a friend and used it for two days, at the end of each day, I had to apply my screen protector again. If you need some images on the Ballistic one, tell me, I will do some for you.

Test.

Image part 3.

Looks like a good alternative to otter box. Thanks for sharing.
Sent from my Nexus 4

I also got this case in white, i absolutely love it except for the fact that it's white, and gets dirty if not taken care of. Other then that, it's awesome. I don't use it now, because i have lens for my phone camera, but when I did use it, i wasn't afraid of dropping it.

@opticaldh. What kind of screen protector are you using?
Sent from my Nexus 4 using xda premium

mcarbaja said:
@opticaldh. What kind of screen protector are you using?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
I have a wet one. zagg.

another rugged case, which isn't available in Germany without 20€ shipping.... sad
Sent from my Nexus 7 using xda app-developers app

opticaldh said:
Test.
Click to expand...
Click to collapse
Did you erase the 'Acase' logo off ?
How do the buttons feel ?

Nice job on the review. I also have this case for my N4 and it is a great case for $15 as the reviews will show on Amazon.
I do have a wirless charger (lg-wpc 700) and it charges fine with this case on.
Sent from my SAMSUNG-SGH-I317

planoman said:
Nice job on the review. I also have this case for my N4 and it is a great case for $15 as the reviews will show on Amazon.
I do have a wirless charger (lg-wpc 700) and it charges fine with this case on.
Sent from my SAMSUNG-SGH-I317
Click to expand...
Click to collapse
Thanks for the Wifi-charger information :laugh:

New colors available (Blue, purple, red)
ht tp://ww w.amazon.com/Acase-Superleggera-Hybrid-layer-Google/dp/B00B4I2GJU
Just like Galaxy S III, multiple color options are available now for Nexus 4 too.
Also, found 2 YouTube unboxing/reviews for those interested.

Could anyone compare it to the ballistic case ?
This one looks thinner but still looks strong enough to keep protecting the phone from an average drop . :laugh:

Elh0mbreloco said:
Could anyone compare it to the ballistic case ?
This one looks thinner but still looks strong enough to keep protecting the phone from an average drop . :laugh:
Click to expand...
Click to collapse
I'm still waiting for the Superleggera to arrive (7-10 days). As soon as I get it I'll update what I find, compared to Ballistic Shell Gel SG.
I tried the Ballistic one from a buddy of mine but I personally did not like it. The build quality is very good with the ballistic and it feels like it's going to protect the phone well. But from day to day usability it's not very practical.
The inside silicone piece of the Ballistic is very soft/loose. It fits the phone well but without the support of the hard shell it tends to come off. That is why some people complain that the top and bottom of this case is not very fitting, since there is no hard shell support there.
The soft silicone with the protruding corners of the case sometimes gets stuck taking in/out of pant pockets.
In the YouTube reviews and the pictures by OP by the look of the Superleggera, the silicone seems stiffer than the Ballistic and the hard shell supports all four sides, hence more form fitting than the Ballistic and should not have any pocket issue.

nice review, looks nicer than the two later one i bough a few months back.
indoh said:
another rugged case, which isn't available in Germany without 20€ shipping.... sad
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
it's not just germany, any country outside the US pays around that much to get most things shipped from US amazon. Try to find it on another website.

AW: [Review]Acase dual layer Case
neotekz said:
nice review, looks nicer than the two later one i bough a few months back.
it's not just germany, any country outside the US pays around that much to get most things shipped from US amazon. Try to find it on another website.
Click to expand...
Click to collapse
other sides aren't better... got one from Amazon merchant for about 10$ shipping. but I'm waiting for it's arrival since 3 weeks
Sent from my Nexus 7 using xda app-developers app

Acase's are really good I have 1 on both my S3's and love them. I bought a Diztronic for my N4 as these were not available yet. Will be ordering 1 tomorrow.

Can anyone with this case (Acase Superleggera Nexus 4) comment on whether the case lip interferes with edge swiping (e.g. useful to switch tabs in Chrome). Thanks!

gatoruso said:
Can anyone with this case (Acase Superleggera Nexus 4) comment on whether the case lip interferes with edge swiping (e.g. useful to switch tabs in Chrome). Thanks!
Click to expand...
Click to collapse
How slippery is this case? I'm assuming the hard case (outer cover) is, but not the inside tpu bit. Is that true? So can I remove the hard case and expose the tpu while setting it on an uneven surface?

Your English is not bad at all!
Sent from my Nexus 4 using xda app-developers app

Otterbox Commuter or Cygnett Workmate Evolution?

Hi
I'm just looking for some advice.
I'm using a Spigen Slim Armour currently and whilst I love the case I find it's a little bit slippery and the lip on the front is a little too shallow for my liking.
I cant decide whether to get an Otterbox Commuter or Cygnett Workmate. I've never owned cases from either but Otterbox is a brand name I recognise.
I like the workmates protection --- the drop test is convincing but there are reports about the charging port being too small.
The otterbox looks like it might be a bit slippery and may not offer the same protection.
Any advice welcome!

Im using an Otterbox Commuter right now, it's not that slippery though but kinda bulky compared to Spigen..
Sent from my GT-I9505 using xda app-developers app

m.garz said:
Im using an Otterbox Commuter right now, it's not that slippery though but kinda bulky compared to Spigen..
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Thanks I happy with a bit of extra bulk for the extra protection. The spigen is very stylish but I'm not sure how well it will strand up to being dropped.. and it's pretty slippery!!

If I were you I'd go with the workmate. But I personally use the UAG navigator case.
Sent from my SCH-I545 using xda app-developers app

Go for Otterbox Defender (if you don't mind the size). :good:

I realised I wrote defender..I meant the commuter case. The defender is just too heavy duty for me.
Sent from my GT-I9505 using xda premium

JayceOoi said:
Go for Otterbox Defender (if you don't mind the size). :good:
Click to expand...
Click to collapse
otterbox defender; agreed.

Thanks..I've looked at the defender but it's just too bulky for my liking.
Sent from my GT-I9505 using xda premium

I currently use an otterbox commuter. I think for the protection it offers it's not that bulky.
It still easily fits in the breast pocket of my military uniform without being all that noticeable.
Plus otterbox has awesome customer service and warranty. I've gotten several brand new cases from them over the years when port covers broke off or if I had other issues with the case.
Sent from my SPH-L720 using xda app-developers app

Just got the Cygnett Workmate Evolution today. It's a bit bulky but I dont mind because it's going to protect the phone. One thing that I just noticed and you also pointed it out was the phone charger wouldn't go in and it's true. I'm using the stock charger that came with my phone. I'm probably going to get a new charger or return the case.

I have the commuter and I love it.
Sent from my SGH-M919 using xda app-developers app

Figsalan101 said:
Just got the Cygnett Workmate Evolution today. It's a bit bulky but I dont mind because it's going to protect the phone. One thing that I just noticed and you also pointed it out was the phone charger wouldn't go in and it's true. I'm using the stock charger that came with my phone. I'm probably going to get a new charger or return the case.
Click to expand...
Click to collapse
Thanks.. I'm sorry it doesn't fit. I think I read on xda that they were changing the design.
Sent from my GT-I9505 using xda premium

Bradden1 said:
Thanks.. I'm sorry it doesn't fit. I think I read on xda that they were changing the design.
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
No need to worry. Yes, the charging port is too small (narrow) for the stock S4 charger, but one sharp knife and five minutes later... problem solved.
I received my Workmate Evolution earlier this week, and got my S4 this morning. Sure enough, the charging port was too narrow. I took a sharp knife and raked it across the upper and lower surfaces of the case's port, holding the blade at a 90° angle to the surface. Thus, abrading it rather than cutting it. Took about five minutes.
In Cygnett's defense, the OEM charger plug is much bigger than any other micro USB cable plug I own.
Hours into owning the phone, I can say I'm happy with both it and the Cygnett case.
Sent from my SAMSUNG-SGH-I337 using xda premium

+1 for otterbox.
I've been using it since iphone 4.
I recall dropping it from 6 feet on concrete.
The corner of hard shell broke but my iphone was flawless. They also sent me a replacement case and honoured on their lifetime warranty policy.
As for s4 commuter, I personally find it a 'little' slippery but not as much as a naked s4.

Bradden1 said:
Hi
I'm just looking for some advice.
I'm using a Spigen Slim Armour currently and whilst I love the case I find it's a little bit slippery and the lip on the front is a little too shallow for my liking.
I cant decide whether to get an Otterbox Commuter or Cygnett Workmate. I've never owned cases from either but Otterbox is a brand name I recognise.
I like the workmates protection --- the drop test is convincing but there are reports about the charging port being too small.
The otterbox looks like it might be a bit slippery and may not offer the same protection.
Any advice welcome!
Click to expand...
Click to collapse
I absolutely love both Otterbox and Cygnett. In the past, I've had issues with Otterbox's silicone warping out of shape. The new one on my wife's HTC One (which is identical to the one I tested on my S4 earlier) is way better than the older versions. Went with Cygnett this time purely based on aesthetics as I think the Cygnett looks wayyyyyy better.
The main differences in protection are that the commuter cases have the hard polycarbonate closer to the edges, while cygnett offers a wider tpu layer. The lip above the screen on the workmate is slightly higher than that of the Commuter. Cygnett's TPU is harder though I can't offer an opinion on if its better or worse (though it means the fit on the Cygnett is slightly better, espcially around the sections where the hard bits clamp around the soft bits). I think the hard shell is thinner but the TPU thicker on the workmate
Usage wise, the Cygnett is slightly grippier than the otterbox. The button presses slightly less mushy. The edge of the lip on the front is sharper and you'll notice it though it's not uncomfortable. I like the fact that the ports are uncovered, but the reports are right. The hole for the USB port is too narrow. I can't fit the original cable in, however it's not a deal breaker for me as I have 3 other cables and chargers. Nothing a sharp hobby knife can't fix though.
To be honest, unless the sharper edge on the front lip or usb port hole size are deal breakers, I would recommend the Cygnett. That being said, both are pretty good cases, and you can't go wrong with either when it comes to protection.

Bradden1 said:
Thanks.. I'm sorry it doesn't fit. I think I read on xda that they were changing the design.
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
I ended up grinding down the sides of my charger just a bit. My charger still looks new and you cant really tell that i modified it. I can charge my phone now

h3lluvaninjuhneer said:
Cygnett WorkMate Evolution in grey....
View attachment 2015325
View attachment 2015326
View attachment 2015327
View attachment 2015328
View attachment 2015331
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Pics...

Bradden1 said:
Hi
I'm just looking for some advice.
I'm using a Spigen Slim Armour currently and whilst I love the case I find it's a little bit slippery and the lip on the front is a little too shallow for my liking.
I cant decide whether to get an Otterbox Commuter or Cygnett Workmate. I've never owned cases from either but Otterbox is a brand name I recognise.
I like the workmates protection --- the drop test is convincing but there are reports about the charging port being too small.
The otterbox looks like it might be a bit slippery and may not offer the same protection.
Any advice welcome!
Click to expand...
Click to collapse
i bought the WorkMate over the weekend. love the case.
http://www.frys.com/product/7651437?site=sr:SEARCH:MAIN_RSLT_PG
super tough bounced across the floor a few times already and no scuffs or anything removes easy to change out the battery and/or SD card

Hey figsalan101,
Nick here form Cygnett, mate.
Sorry to hear about that the charger port isn't lining up correctly with the WorkMate Evolution, we have had a few reports of this happening.
The issue of the charging port has been fixed and all of the cases we are introducing into the market now are working correctly. You entitled to a refund or exchange at the point of purchase if you'd like to.
Regards,
Nick

I went for the black Cygnett Workmate Evolution in the end and love it - thanks for the advice.
The ports are all correct - I bought it directly from Cygnett's website and I guess they have fixed the issues with the earlier ones.
The buttons are still a little stiff even after a couple of weeks use.. but it's a small price to pay for the protection.
I have dropped it once already when getting out of my car. It bounced on my driveway a couple of time without any visible damage.
I still like my Spigen Neo Hybrid, Slim Armour and UAG Scout but none offer the protection I need at work... and excellent grip.

Ringke Fusion ($13.99) vs Official Bumper ($12.95)

I was wondering which case is better than the other?
I'm looking to keep the nexus 4 slim, sexy, and functional.
I narrowed it down to these two cases because of the clicky tactile feels (on the fusion revision) and the original bumper while maintaining slimness.

I got the bumper a week after I received my phone. Well, not the official one, but a replica of the LG one that's sold in the Play Store. The one I received off Amazon seemed fine, but after about a week of normal use, 2 cracks appeared - one on the bottom where the USB is, and the other on the power button.
I think that they appeared because of plugging in the phone and clicking the power button turning it on and off. The material (metal-looking plastic) that surrounds the bumper is flimsy on it's own, and with a certain amount of pressure and heat from the phone, it's prone to cracking.
If you Google around you'll find that a lot of people have had the same problem with the official one. I bought the same bumper for my friend too, but his is holding up well so far, so I'm not sure. The bumper seemed to have a tighter fit on his N4 whereas mine felt a little loose. He has been using it for a couple months as his was the first wave of N4 that were shipped out. I just got mine a little less than a month ago.
Switched over to the Ringke Fusion based on the number of excellent reviews it got both on XDA and Amazon. Took about a week to get here and because it is the revision, the buttons are clicky and give a good feedback. The case also doesn't add much bulk at all. While I do like the heft of carrying around the phone naked, the glass panels scare me. I never used cases on my old phones, but then again, they were plastic and metal. They sure could take a hit!
The Fusion makes the N4 feel more solid as it is, and it works well with wireless chargers. The only complaint I have about it is the back clear plastic tends to dirty quite easily, with scuffs, fingerprints. But then again, who takes time out of their day to gander at the back of the phone. Sure it's pretty but you'll be spending more of your time messing around with the front.

Where'd you find the official bumper for 13?
Sent from my Nexus 4 using xda app-developers app

Ace42 said:
Where'd you find the official bumper for 13?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
It's a replica of the real bumper. It's on ebay and amazon.
Sent from my Nexus 4 using Tapatalk 4 Beta

On amazon it says official bumer by Google 12.95 I'm in the US
zephiK said:
It's a replica of the real bumper.
It's on ebay and amazon.
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Ace42 said:
Where'd you find the official bumper for 13?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse

I remember when i bought my N4, I kept buying different bumpers because either they were too tight [messed up my screen protector], too bulky or did not protect my phone good enough. In January, I bought Ringke Fusion; been using it since then . Its not one of those cheap bumpers, you will definitely feel the quality. Its fits the phone very well and you wont feel the size of it in your hand or in your pocket.

mc704 said:
On amazon it says official bumer by Google 12.95 I'm in the US
Click to expand...
Click to collapse
It's a replica. The real ones are sold on the play store. If it says official elsewhere and is less than the price you would normally pay, chances are it's not official. Anyone can say it's official but it isn't.
Sent from my Nexus 4 using xda premium

I got both . Currently sporting the white OEM bumper. Before that I sported the Ringke Fusion. I will continue using the Fusion when I travel to like Disney lol.

kpjimmy said:
I got both . Currently sporting the white OEM bumper. Before that I sported the Ringke Fusion. I will continue using the Fusion when I travel to like Disney lol.
Click to expand...
Click to collapse
Same. I got the fusion and the white OEM bumper.
To the OP: if you haven't seen it yet, the poetic bumpers are pretty good.
Stopped using my white OEM one cause it turned yellow on the sides and can't clean it no matter what I try.
Sent from my awesome Neo Armstrong Cyclone Jet Armstrong Nexus⁴ via Tapatalk

Kendaihou said:
Same. I got the fusion and the white OEM bumper.
To the OP: if you haven't seen it yet, the poetic bumpers are pretty good.
Stopped using my white OEM one cause it turned yellow on the sides and can't clean it no matter what I try.
Sent from my awesome Neo Armstrong Cyclone Jet Armstrong Nexus⁴ via Tapatalk
Click to expand...
Click to collapse
I'm gonna use the hella out of the OEM white bumper because I got it for free .

The bumper makes the phone really wide
Sent from my Nexus 4 using Tapatalk 4 Beta

I got ringke fusion, official bumper, the white look alike of fusion and poetic. I wanna use my fusion but my tempered glass doesn't fit well with it. I'll rather go with the fusion because of its solid feeling but the bumper is good.
SENT FROM MY RAGING NEXUS⁴ ?

I got the Ringke Fusion. IT shows fingerprints REALLY bad - much worse than the back glass - and the fingerprints aren't easy to clean off unless you use water. I ended up taking it off and using the bumper I got free before finding another case.

scottharris4 said:
I got the Ringke Fusion. IT shows fingerprints REALLY bad - much worse than the back glass - and the fingerprints aren't easy to clean off unless you use water. I ended up taking it off and using the bumper I got free before finding another case.
Click to expand...
Click to collapse
Fingerprints to me don't show as bad when I put my dbrand skin on. I hardly notice any unless I view the back at an angle.

scottharris4 said:
I got the Ringke Fusion. IT shows fingerprints REALLY bad - much worse than the back glass - and the fingerprints aren't easy to clean off unless you use water. I ended up taking it off and using the bumper I got free before finding another case.
Click to expand...
Click to collapse
We talking about regular prints..? Cuz my hands are always clean, and while it definitely attract prints, a quick swipe from my t-shirt takes them right off.
Sent from my Nexus 4

So the Google bumper on amazon is fake and the fusion case attracts a butt load of finger prints
I see that most people tell me that they are using bumper instead... What bumper? Poetic?

mc704 said:
So the Google bumper on amazon is fake and the fusion case attracts a butt load of finger prints
I see that most people tell me that they are using bumper instead... What bumper? Poetic?
Click to expand...
Click to collapse
LOL I would personally get the Fusion, and yes, most bumpers online are replicas even if they are in LG packaging. The normal bumpers cost about 20bux (USD) so that's a good gauge in authentic or not.
There's a thread somewhere comparing the packaging but basically, if there's a holo sticker on the back, mine is square that reads "Original accessories by LG".
GL

Bumper
Wider
Looks better
Less protection
Ringke
Better protection
Lets you create custom designs to insert behind the plastic
horrible protruding creases on the back of the case. - rough to the touch
picks up fingerprints and dust way too easily.
I use bumper for everyday use and if i'm going to be somewhere outside for a long while where i won't have a place to put my phone safely away i use the ringke.

kpjimmy said:
Fingerprints to me don't show as bad when I put my dbrand skin on. I hardly notice any unless I view the back at an angle.
Click to expand...
Click to collapse
Does the Ringke Fusion case fit properly with a dbrand skin on? Was looking on getting the case but was not sure if it would fit on, as I have a dbrand carbon skin on the back.

Androidttraction said:
Does the Ringke Fusion case fit properly with a dbrand skin on? Was looking on getting the case but was not sure if it would fit on, as I have a dbrand carbon skin on the back.
Click to expand...
Click to collapse
Yes it fits fine. I have a custom and that's technically two skins of thickness in my areas and fits fine.