Firstly hello to everyone
I have a terminal free HTC one X bought one two weeks ago that will not start, I summarize a bit.
- On the second day of having it root, change firmware and put Jellybean 4.1 Htc one x 8.50 maximus.
From day one it was hard to load, if you were using the battery was up maybe 3 or 4% in a very short time and lasted Rom both the original and this
After 4 days of being hung root is about 2 or 3 times and had to turn it off, it was hard on.
Being root and seeing that the symptoms I thought it was the battery, I proceeded to change it and still the same, will not start, when it does after insisting often connected to usb cable original (after many attempts) by pressing power + volume - enters the menu but hangs after a while if you use it or install a Rom. No to that is the problem, if the firmware or hardware problem.
No red led charging or pc usb original charger or usb. I checked with a tester consumption and 1.6 W when brand power and volume pulse at 10 seconds up to 1.8 W and down again to 1.6 w
In this moment my htc is a brick..
Someone could give me some advice before sending it to repair and gatarme money? thanks
Firstly, questions belong in the Q&A section.
Secondly you can RUU back to factory setup and see if it works correctly then. If it does then you can reroot and install custom Rom again.
Sent from my Venom 1
I think maximus rom is for the international one x. If yours is an att one x and you put an international ROM on it its bricked and more than likely is unfixable
Sent from my One X using xda app-developers app
Yea maximus is a international rom ur hosed
And this should have been put in the q&a section
I guess the topic in all caps escaped your eyes
Sent from my HTC One XL using Tapatalk 2
Its not clear, were you ever able to boot into Maximus? If so, you have the international (Tegra3) One X, and are in the wrong forum. Otherwise you flashed a ROM for the wrong device.
Try charging (use wall charger, not USB) for several hours. If no charge light still, you're screwed.
can you still boot into bootloader?
Related
Hi mates
I bricked my HTC One S. It was running on ViperS rom long time but i want it flash back to stock rom but i didnt find any new tmo de rom and old didn't work. So i changed cid to supercid. Installed stock EU RUU without problems. Ota update worked after it so i updated it 2 times and next update was to 4.1 that was what i needed but after download during installation something happend, I wasn't watching on screen. I saw only how display turned off and now its good brick . Black screen without, connection to pc its only making conect and dc sound for 30secs in windows( same sound when i disconnect usb device). Neither led don't turn on after connecting to charger.
Any ideas? how to flash BL to mainboard? I reaed about some company which is flashing it. Do u know where is it or have some contact?
Have you checked out this thread?
http://forum.xda-developers.com/showthread.php?t=1990043
[TUT] Downgrade/Unbrick Ville S4
Sent from my HTC One S using Tapatalk 2
droidmakespwn said:
Have you checked out this thread?
http://forum.xda-developers.com/showthread.php?t=1990043
[TUT] Downgrade/Unbrick Ville S4
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
No, it can't help me coz phone is dead i cant turn it or connect with pc adb says no devices found
adb is weird.
Whenever I think my phone is dead (when I do something stupid), I first hold down the power button for five to six second, and see if I get the blinking lights at the bottom of the screen. If nothing, I plug the phone to charge (to make sure it hasn't died. I leave it there for a good hours. Then try the power again. If I don't get anything after that, then I'm positive that I've bricked it.
firefiber said:
adb is weird.
Whenever I think my phone is dead (when I do something stupid), I first hold down the power button for five to six second, and see if I get the blinking lights at the bottom of the screen. If nothing, I plug the phone to charge (to make sure it hasn't died. I leave it there for a good hours. Then try the power again. If I don't get anything after that, then I'm positive that I've bricked it.
Click to expand...
Click to collapse
No he really has bricked because of having SuperCID and doing the JB OTA.
Holy crap, I was actually going to do that. Whoops.
firefiber said:
Holy crap, I was actually going to do that. Whoops.
Click to expand...
Click to collapse
Ya I would just wait in till it comes out for your CID.
So i was tired of my battery lasting 4 hours on a rooted at&t one x so i relocked the bootloader and flashed the stock RUU. I then recieved the ota Jelly bean update and with more than 80% battery. It went through the installation with no problem and then turned itself off. AND NOW WILL NOT DO ANYTHING. IVE TRIED TO HARD RESET and Hold the power button and volume buttons. I have pluged it into my laptop, my wall for HOURS! I dont even get the led light to do anything. I however can connect to my pc and hear the notification of it being connected. I have tried ADB and the script says device dosent acknowledge.
....Im pretty sure im SOL but any ideas?
Please go to the correct forum.
This is the international HOX (Tegra 3) forum.
Sent from my HTC One X using xda app-developers app
ejdam206 said:
So i was tired of my battery lasting 4 hours on a rooted at&t one x so i relocked the bootloader and flashed the stock RUU. I then recieved the ota Jelly bean update and with more than 80% battery. It went through the installation with no problem and then turned itself off. AND NOW WILL NOT DO ANYTHING. IVE TRIED TO HARD RESET and Hold the power button and volume buttons. I have pluged it into my laptop, my wall for HOURS! I dont even get the led light to do anything. I however can connect to my pc and hear the notification of it being connected. I have tried ADB and the script says device dosent acknowledge.
....Im pretty sure im SOL but any ideas?
Click to expand...
Click to collapse
If you were SuperCID, and also s-on, and you took the OTA update, you've probably bricked your phone.
athulele said:
Please go to the correct forum.
This is the international HOX (Tegra 3) forum.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Uhhhhhhh... Fail.......
That plan backfired didn't it cutie pie..? Xoxo cupcake.
Sent from my HTC One X using xda premium
Dear all,
I've used HTC One X AIO Kit By Hasoon2000 v2.3 to root my HTC One X Phone. I followed step by step. but unfortunately I download the wrong .zip file ViperX OTA 3.7.2-3.7.3 instead of ViperX 3.7.1. After PERM ROOT run in the HTC One X AIO Kit. My phone went dead. Screen show some reboot screen and then went dead just black out and my computer unable to detect the phone now. when I use HTC One X AIO kit, it show error. device not found. What I can do to bring back my phone to life again. Please help me! all info inside the phone are very important to me. Please........
Desperately need to bring the my phone to live again.
ColinLynn said:
Dear all,
I've used HTC One X AIO Kit By Hasoon2000 v2.3 to root my HTC One X Phone. I followed step by step. but unfortunately I download the wrong .zip file ViperX OTA 3.7.2-3.7.3 instead of ViperX 3.7.1. After PERM ROOT run in the HTC One X AIO Kit. My phone went dead. Screen show some reboot screen and then went dead just black out and my computer unable to detect the phone now. when I use HTC One X AIO kit, it show error. device not found. What I can do to bring back my phone to life again. Please help me! all info inside the phone are very important to me. Please........
Desperately need to bring the my phone to live again.
Click to expand...
Click to collapse
Please anyone or everyone in same situation...... please help............
Relax, we have lives you know.
Does your phone turn on at all?
What software version did you have?
If you have an evita and you just flashed a viperx zip instead of viperxl, There's a good chance you now have an irrecoverable brick.
Sent from my HTC One X using xda app-developers app
Any charge LED when connected to wall charger?
ColinLynn said:
Dear all,
I've used HTC One X AIO Kit By Hasoon2000 v2.3 to root my HTC One X Phone. I followed step by step. but unfortunately I download the wrong .zip file ViperX OTA 3.7.2-3.7.3 instead of ViperX 3.7.1. After PERM ROOT run in the HTC One X AIO Kit. My phone went dead. Screen show some reboot screen and then went dead just black out and my computer unable to detect the phone now. when I use HTC One X AIO kit, it show error. device not found. What I can do to bring back my phone to life again. Please help me! all info inside the phone are very important to me. Please........
Desperately need to bring the my phone to live again.
Click to expand...
Click to collapse
This sounds to me that you flashed a rom meant for the International OneX (Endeavoru) , which is an unfixable brick.
ViperX = Endeavoru
ViperXL = Evita
You could always try this:
http://forum.xda-developers.com/showthread.php?t=1966850
redpoint73 said:
Any charge LED when connected to wall charger?
Click to expand...
Click to collapse
Yes, when connected to wall charger or computer, it red light show that it's charging..and screen turn on and stop at HTC quietly brilliant screen. After that stop and cannot switch of the screen again.
Thanks
Colin
Press and hold power, the back,home,recent apps buttons will blink a bunch of times and the screen will shut off. When the screen shuts off, let go of power and then press and hold volumedown until the bootloader comes up.
Select recovery, from there you can mount your phone and then copy a proper Rom for your device and then flash it.
If selecting recovery also bootloops, then do the same thing to get into boptlpader again and then reflash recovery then fastboot erase cache then select recovery from bootloader and from there you can flash a proper Rom.
This should be a good lesson for you to read and understand before messing with your phone. What you did was pretty dangerous. HTC one x and att one x are NOT the same phone.
Sent from my HTC One X using xda app-developers app
i don't think we have a version 2.3 of the aio toolkit. i believe the op has the endeavoru.
Ah in that case op you're in the wrong forum now. Same steps should apply but for endeavor. Try not to mix up forums. Just bookmark the international one x forum to avoid further confusion.
http://forum.xda-developers.com/forumdisplay.php?f=1533
If in bootloader your phone says endeavor. That link is where you should post, get roms kernels, etc.
If evita, then it's here.
Confusion causes bricks.
Sent from my HTC One X using xda app-developers app
So I was trying to revert back to stock on my One X. I flashed stock recovery, re locked the phone and then downloaded the newest update from HTC's website. Everything went according to plan until the update finished and my phone no longer worked. It appears to turn on based on when i plug it into my computer it makes the "hey you plugged in a USB device" sound and when I long hold the power button it makes the disconnect sound. There is no display whatsoever.
What I have tried.
- Cannot boot into recovery
- Cannot get adb to recognize my device
- Cannot get fastboot to recognize my device
- Charged with HTC power brick and cable for 24 hours to validate it wasn't dead. No charge light while charging
Seems unlikely, but does anyone have any idea? Thanks in advance!
Sounds like a hardware problem, if the display/charge light don't turn on at all :S
Doesn't sound like hardware at all to me, sounds like user error. What ROM were you on when you flashed the OTA?
Sent from my Evita
If you were SuperCID, S-on, and tried to flash the Jellybean update, you are bricked, per my PSA sticky at the top of General. If this is the case, time to JTAG.
Sent from my HTC One XL using xda app-developers app
So, flashed cm-11-20141112-SNAPSHOT-M12-evita onto the wifes One X via recovery, then the google apps.
At reboot the phone goes to a black screen. When pushing and holding the power button the phone will blink the soft buttons 15 times and then reboot.
I restored a nandroid in the meantime, but would anyone have any idea what could have failed?
It's a HTC One X from Rogers Wireless in Canada, rooted via HTC Dev tool, TWRP recovery.
I flashed cm-11-20141112-SNAPSHOT-M12-evita because, as far as I know, the Rogers One X is actually a One XL. Would I actually have to flash cm-11-20141112-SNAPSHOT-M12-endeavoru?
Never mind about that, bootloader confirms that its a One XL.
Hello,
I'm going to close this thread because you are already getting help here.
http://forum.xda-developers.com/one-x-att/general/rogers-one-x-one-xl-t2994004
Please continue the discussion there.
Thanks,
BD619