hi, i managed to root my samsung galaxy y using an update.zip and now i am wondering how to partition the sd card because the phone storage is small and my phone is becoming slow. Need help ASAP
Thanks in advanced
rom manager can do that for u
ok so i installed rom manager and selected partition sd but it said i must install clockwerk mod so i tried but my device is not in the list. What should i do?
Maybe reinstall again? Sometimes it has some little problem
ok will try to reinstall
still no samsung galaxy y after reinstall
can i flash it via odin or will it brick my phone?
landlord28 said:
can i flash it via odin or will it brick my phone?
Click to expand...
Click to collapse
If u Want partition use Minitool wizrd (PC) or CWM
Both are simple.
________________________________________
HIT THANKS IF I HELPED YOU
Click to expand...
Click to collapse
landlord28 said:
hi, i managed to root my samsung galaxy y using an update.zip and now i am wondering how to partition the sd card because the phone storage is small and my phone is becoming slow. Need help ASAP
Thanks in advanced
Click to expand...
Click to collapse
There is a tool for partitioning called minitool for partition, else u can try the method of partition using advanced option in cwm!
Before that, make sure u have a custom kernel that has ext3 or 4 partition support
For more info goto Galaxy y development thread:thumbup:
Hit thanks rather than typing it
I installed the Kyrillos rom agian after switching to ics. I had already partioned my sd card before and hybrid data 2 sd was working fine. Now when i have reflashed the rom, and i started to install my 72 apps via titanium back. After installing some 10 app, it says that i have low system memory and the annoying pop up comes. What should i do?
I have even removed the partion and re-partioned it. Still no help! Please somebody help. I even flashed the rom four times.
Thanks in advance!
P.S. I had posted this is Kyrillos Rom page but no answer from them.
http://forum.xda-developers.com/showpost.php?p=20396589&postcount=11027
I have solved the problem. I forgot to put the sdfiles in the memory card and also forgotten to change titanium back's system prefs
Well check again if you have HD2SD enabled properly or not. Whether you have those files in SDcard or not to enable it. Wipe data again in recovery and try again.
dhirend_6d said:
Well check again if you have HD2SD enabled properly or not. Whether you have those files in SDcard or not to enable it. Wipe data again in recovery and try again.
Click to expand...
Click to collapse
What sd card files are you talking about? The one which came with kryllios v8??
dhirend_6d said:
Well check again if you have HD2SD enabled properly or not. Whether you have those files in SDcard or not to enable it. Wipe data again in recovery and try again.
Click to expand...
Click to collapse
Ok i solved the Problem. Thanks!!!
Hi, I have try to read all information in this beautiful and complex forum. I'm interested to increase my internal memory space and i have try to use Link2sd, but after 2 weeks i have noticed that all memory it is full.
I have put on my smartphone the BALT ROM, but i cannot write under that topic because i don't have sufficient posts.
Someone can help me to reach this point? Pls help me because I have try to repeat all operations 3 times but in all cases i have obtain the same result.
Thx in advance
Ivan Aka KaiserOrn
I have read that Link2SD can have some problem with 4.2.2, it is true ? How can i fix it or exist others software similar to avoid this problem ?
KaiserOrn said:
I have read that Link2SD can have some problem with 4.2.2, it is true ? How can i fix it or exist others software similar to avoid this problem ?
Click to expand...
Click to collapse
I used Link2SD on CM10.1.4 (Android 4.2.2) of Jenkins. I've not problems. Before install ROM need partition SD Card on FAT32 and ext4 partitions. Now can install ROM. After install ROM, install Link2SD. Open Link2SD and select ext4, wait to make script. When script make you'll get a notification that the script is done and to you need reboot phone. Reboot phone. After reboot phone, open Link2SD and in Settings check Auto link. Exit from Link2SD and it is it.
When you install applications, you can get notification that is memory full. After this notification, reboot phone and memory will be O.K.
I do all your same step, and usually after reboot i have about 70 MB free, but in this last day i have noticed that i have an icon that tell me that my internal memory is full.
My only difference from u is that i use ext3 part and not ext4, but i think it is the same.
DO u have any suggestion ?
KaiserOrn said:
I do all your same step, and usually after reboot i have about 70 MB free, but in this last day i have noticed that i have an icon that tell me that my internal memory is full.
My only difference from u is that i use ext3 part and not ext4, but i think it is the same.
DO u have any suggestion ?
Click to expand...
Click to collapse
Not problem with ext3.
Try open Link2SD and try made Create a link manually. Maybe for some applications need to be done manually.
Can u link me all your config for Link2SD pls ?
EDIT: I have try to move all app to SD card (but inner space is less than before)
KaiserOrn said:
Can u link me all your config for Link2SD pls ?
Click to expand...
Click to collapse
Settings and Auto link settings:
KaiserOrn said:
Can u link me all your config for Link2SD pls ?
EDIT: I have try to move all app to SD card (but inner space is less than before)
Click to expand...
Click to collapse
Not to SD Card. You need try "Create link". If you can not, then it means that the link has automatically created.
ZmisiS said:
Not to SD Card. You need try "Create link". If you can not, then it means that the link has automatically created.
Click to expand...
Click to collapse
I putt all as linked and i have ONLY10 MB free it is normal ?
How to partition to ext4 through CWM?
ZmisiS said:
I used Link2SD on CM10.1.4 (Android 4.2.2) of Jenkins. I've not problems. Before install ROM need partition SD Card on FAT32 and ext4 partitions. Now can install ROM. After install ROM, install Link2SD. Open Link2SD and select ext4, wait to make script. When script make you'll get a notification that the script is done and to you need reboot phone. Reboot phone. After reboot phone, open Link2SD and in Settings check Auto link. Exit from Link2SD and it is it.
When you install applications, you can get notification that is memory full. After this notification, reboot phone and memory will be O.K.
Click to expand...
Click to collapse
Does CM 7/10 support Link2SD? And if yes, which types of partitions? I have an ext2 partition but it does not work on cm7-based JellyBread v5.
How do I partition it to ext4 through TJstyle's cwm 5?
KaiserOrn said:
I putt all as linked and i have ONLY10 MB free it is normal ?
Click to expand...
Click to collapse
How many applications you have installed? I've with default apps installed about 60 apps and 110 MB free. After install ROM I installed this:
http://forum.xda-developers.com/showthread.php?t=2157251
After, I install Link2SD and it is it. My applications:
---------- Post added at 03:29 PM ---------- Previous post was at 03:26 PM ----------
freak744 said:
Does CM 7/10 support Link2SD? And if yes, which types of partitions? I have an ext2 partition but it does not work on cm7-based JellyBread v5.
How do I partition it to ext4 through TJstyle's cwm 5?
Click to expand...
Click to collapse
Need be ext3 or ext4. JellyBread I don't tried.
I don't partition with CWM. I do it with MiniTool Partition Wizard Home Edition. I installed it on PC and I connect phone with PC over USB.
I open MiniTool ... and made partition.
Select FAT32 Primary partition and ext4 Primary partition.
http://forum.xda-developers.com/wiki/SD_card_partitioning
ZmisiS said:
How many applications you have installed? I've with default apps installed about 60 apps and 110 MB free. After install ROM I installed this:
http://forum.xda-developers.com/showthread.php?t=2157251
After, I install Link2SD and it is it. My applications:
Click to expand...
Click to collapse
I have less 40 apps but no space, it is very strange but i don't understand why this happen. Do u have any idea? Can u ask inside BALTROM topic pls
EDIT: I don't understand very well what this app "Odex Me" work. If i use it i cannot not any type of theme so my phone will be all back and similar to terminal ?
KaiserOrn said:
I have less 40 apps but no space, it is very strange but i don't understand why this happen. Do u have any idea? Can u ask inside BALTROM topic pls
EDIT: I don't understand very well what this app "Odex Me" work. If i use it i cannot not any type of theme so my phone will be all back and similar to terminal ?
Click to expand...
Click to collapse
With Odex Me free memory in Internal memory is bigger.
ZmisiS said:
With Odex Me free memory in Internal memory is bigger.
Click to expand...
Click to collapse
Can u explain me what kind of limitation give this kind of application pls? I don't understand very well from its topic
KaiserOrn said:
Can u explain me what kind of limitation give this kind of application pls? I don't understand very well from its topic
Click to expand...
Click to collapse
I don't understand you. I used OdexMe.apk and Link2SD. Since then I have internal memory and more than I need. I have no interference or slowing down the system. All works O.K.
Do u suggest me, to re-install all over again using your same application order?
KaiserOrn said:
Do u suggest me, to re-install all over again using your same application order?
Click to expand...
Click to collapse
Go in CWM. Now go on wipe data reset, wipe cashe partition and in Advanced, go on wipe dalvik cashe. Flash ROM. After flash ROM again go on wipe data reset, wipe cashe partition and in Advanced, go on wipe dalvik cashe. Reboot Phone. Wait to system up, and it is about 5 minutes.
On SD Card you need have ODEXME.apk. Download it from here:
http://forum.xda-developers.com/showthread.php?t=2157251
Install Root Explorer. Open it and copy odexme.apk and paste it in system/app. Made Permissions for this .apk (rw,r,r). Reboot Phone. After Reboot Phone go in Applications and click on this Odexme.apk and follows instructions. Reboot Phone. After Reboot Phone open Root Explorer and go in system/app and check whether each application has its odex. If have, it is it.
Now install Link2SD. Open Link2SD and select ext4. Wait to make script. When made script, you will notification than script is made. Reboot Phone. After Reboot Phone, open Link2SD, go on Settings and check Auto link. Exit from Link2SD.
Before, you for Link2SD need partition SD Card on Primary FAT32 and primary ext4.
ZmisiS said:
How many applications you have installed? I've with default apps installed about 60 apps and 110 MB free. After install ROM I installed this:
http://forum.xda-developers.com/showthread.php?t=2157251
Click to expand...
Click to collapse
I have try to resinstall all. After ROM install (BALTROM), I have chose from explorer manager the app that i must install. I start it and it automatically restart my devide several time. After it finished, I have try to go into settings but every time cellphone crash (shut down).
Do u have any ideas?
KaiserOrn said:
I have try to resinstall all. After ROM install (BALTROM), I have chose from explorer manager the app that i must install. I start it and it automatically restart my devide several time. After it finished, I have try to go into settings but every time cellphone crash (shut down).
Do u have any ideas?
Click to expand...
Click to collapse
I not use BALTROM. I don't know. I use CM10.1.4 of Jenkins.
Do u know if CM10.1.4 is fully translate in Italy? Because otherwise my parents cannot understand English
I bought an app on Google play and it is telling me that I can not install it (Error couldn't install on USB storage or SD card). I have spent countless hours looking for a solution but could not find one. I have tried unmounting my SD card (located in Settings>storage>Unmount SD card) then try to download it but it still gives me the same error.
I have an Asus Transformer TF101 rooted (TWRP 2.2.1) With EOS 4 Nightlies JellyBean 4.2.2 ROM (http://forum.xda-developers.com/showthread.php?t=2063406)
(Also It seems to only be with apps I have purchased .)
[The problem was resolved (I just upgraded to Katkiss 4.3)]
Devonaitor said:
I bought an app on Google play and it is telling me that I can not install it (Error couldn't install on USB storage or SD card). I have spent countless hours looking for a solution but could not find one. I have tried unmounting my SD card (located in Settings>storage>Unmount SD card) then try to download it but it still gives me the same error.
I have an Asus Transformer TF101 rooted (TWRP 2.2.1) With EOS 4 Nightlies JellyBean 4.2.2 ROM (http://forum.xda-developers.com/showthread.php?t=2063406)
(Also It seems to only be with apps I have purchased .)
Click to expand...
Click to collapse
Hi,
It's maybe an app that doesn't allow installing on SD card. Some apps like alarm based apps must be installed on internal memory to work properly.
If your device is connected to a computer make sure that it's in the mode "charge only" and not as "disk drive".
Make sure that you have enough space for it.
Hope this will help
Millenium Apps said:
Hi,
It's maybe an app that doesn't allow installing on SD card. Some apps like alarm based apps must be installed on internal memory to work properly.
If your device is connected to a computer make sure that it's in the mode "charge only" and not as "disk drive".
Make sure that you have enough space for it.
Hope this will help
Click to expand...
Click to collapse
I have about 13 GB left on my internal storage and 7 with my SD card, it is only with apps I bought like DSLR controller, splashtop hd and GTA III. I can download free apps which is weird.
Devonaitor said:
I have about 13 GB left on my internal storage and 7 with my SD card, it is only with apps I bought like DSLR controller, splashtop hd and GTA III. I can download free apps which is weird.
Click to expand...
Click to collapse
Grab the apk then use adb or a terminal emulator
and issue these commands
Code:
su
pm set-install-location 1
Now you can go about with installing the apk
If it doesnt work though then you can try a different gapps for your rom.
Solved
Lgrootnoob said:
Grab the apk then use adb or a terminal emulator
and issue these commands
Code:
su
pm set-install-location 1
Now you can go about with installing the apk
If it doesnt work though then you can try a different gapps for your rom.
Click to expand...
Click to collapse
Thank you, I just used a different ROM. I am almost positive that it was the ROM's fault, but I upgraded to Kat Kiss 4.3 and it works fine.
Devonaitor said:
Thank you, I just used a different ROM. I am almost positive that it was the ROM's fault, but I upgraded to Kat Kiss 4.3 and it works fine.
Click to expand...
Click to collapse
or you can do a hard reset to resolve the problem
manly107 said:
or you can do a hard reset to resolve the problem
Click to expand...
Click to collapse
Thank you for the advice but I have already resolved the problem, and I am now able to download all my purchased apps.
manly107 said:
or you can do a hard reset to resolve the problem
Click to expand...
Click to collapse
Most likely, but its better to clean flash the system partition too.
I rooted my Samsung Galaxy Tab 2 7.0 P3113 (used to have jellybean 4.2.2.) and flashed the Resurrection Remix custom ROM and GAPPS on it. It's fantastic and running great!!!
The tablet came with 8 GB of space and I have a 32 GB sd card in it. I keep getting "not enough space" warnings from my SD card even though it's almost empty. I can't install any apps to the sd card, and there is not enough internal memory to store them either. This makes the tablet almost as useless as before I rooted and put a custom rom. Is there a way to get my sd card to stop thinking it's full/ allow apps to move over to it? Is the next step to partition the sd card and then use an app like link2sd? I've never done it before. Please advise, thank you.
Try clearing dalvik cache
shsagnik said:
Try clearing dalvik cache
Click to expand...
Click to collapse
Thank you, I did that already and it made no difference.
You can try transferring the data on the sdcards to some other place and then you can try formatting them through recovery
shsagnik said:
You can try transferring the data on the sdcards to some other place and then you can try formatting them through recovery
Click to expand...
Click to collapse
This doesn't work, but thank you.
jane10 said:
This doesn't work, but thank you.
Click to expand...
Click to collapse
The ROM and data are in separate partitions. It sounds like you didn't wipe your data when you flashed a ROM with a different version of Android. So , the data partition is still full with your old data and the apps that are installed there are inaccessible by the system. You need to go to recovery and wipe data, but not the sd card, and not internal memory. I don't believe a factory reset will help since it seems the system already can not see the partition the apps are installed on now.
jane10 said:
I rooted my Samsung Galaxy Tab 2 7.0 P3113 (used to have jellybean 4.2.2.) and flashed the Resurrection Remix custom ROM and GAPPS on it. It's fantastic and running great!!!
The tablet came with 8 GB of space and I have a 32 GB sd card in it. I keep getting "not enough space" warnings from my SD card even though it's almost empty. I can't install any apps to the sd card, and there is not enough internal memory to store them either. This makes the tablet almost as useless as before I rooted and put a custom rom. Is there a way to get my sd card to stop thinking it's full/ allow apps to move over to it? Is the next step to partition the sd card and then use an app like link2sd? I've never done it before. Please advise, thank you.
Click to expand...
Click to collapse
other option is...clean flash the rom again..this timefactory reset and format /system and also /data ..try to install as a new rom...also format ur internal sd too...try this if it works..