Hi, I have try to read all information in this beautiful and complex forum. I'm interested to increase my internal memory space and i have try to use Link2sd, but after 2 weeks i have noticed that all memory it is full.
I have put on my smartphone the BALT ROM, but i cannot write under that topic because i don't have sufficient posts.
Someone can help me to reach this point? Pls help me because I have try to repeat all operations 3 times but in all cases i have obtain the same result.
Thx in advance
Ivan Aka KaiserOrn
I have read that Link2SD can have some problem with 4.2.2, it is true ? How can i fix it or exist others software similar to avoid this problem ?
KaiserOrn said:
I have read that Link2SD can have some problem with 4.2.2, it is true ? How can i fix it or exist others software similar to avoid this problem ?
Click to expand...
Click to collapse
I used Link2SD on CM10.1.4 (Android 4.2.2) of Jenkins. I've not problems. Before install ROM need partition SD Card on FAT32 and ext4 partitions. Now can install ROM. After install ROM, install Link2SD. Open Link2SD and select ext4, wait to make script. When script make you'll get a notification that the script is done and to you need reboot phone. Reboot phone. After reboot phone, open Link2SD and in Settings check Auto link. Exit from Link2SD and it is it.
When you install applications, you can get notification that is memory full. After this notification, reboot phone and memory will be O.K.
I do all your same step, and usually after reboot i have about 70 MB free, but in this last day i have noticed that i have an icon that tell me that my internal memory is full.
My only difference from u is that i use ext3 part and not ext4, but i think it is the same.
DO u have any suggestion ?
KaiserOrn said:
I do all your same step, and usually after reboot i have about 70 MB free, but in this last day i have noticed that i have an icon that tell me that my internal memory is full.
My only difference from u is that i use ext3 part and not ext4, but i think it is the same.
DO u have any suggestion ?
Click to expand...
Click to collapse
Not problem with ext3.
Try open Link2SD and try made Create a link manually. Maybe for some applications need to be done manually.
Can u link me all your config for Link2SD pls ?
EDIT: I have try to move all app to SD card (but inner space is less than before)
KaiserOrn said:
Can u link me all your config for Link2SD pls ?
Click to expand...
Click to collapse
Settings and Auto link settings:
KaiserOrn said:
Can u link me all your config for Link2SD pls ?
EDIT: I have try to move all app to SD card (but inner space is less than before)
Click to expand...
Click to collapse
Not to SD Card. You need try "Create link". If you can not, then it means that the link has automatically created.
ZmisiS said:
Not to SD Card. You need try "Create link". If you can not, then it means that the link has automatically created.
Click to expand...
Click to collapse
I putt all as linked and i have ONLY10 MB free it is normal ?
How to partition to ext4 through CWM?
ZmisiS said:
I used Link2SD on CM10.1.4 (Android 4.2.2) of Jenkins. I've not problems. Before install ROM need partition SD Card on FAT32 and ext4 partitions. Now can install ROM. After install ROM, install Link2SD. Open Link2SD and select ext4, wait to make script. When script make you'll get a notification that the script is done and to you need reboot phone. Reboot phone. After reboot phone, open Link2SD and in Settings check Auto link. Exit from Link2SD and it is it.
When you install applications, you can get notification that is memory full. After this notification, reboot phone and memory will be O.K.
Click to expand...
Click to collapse
Does CM 7/10 support Link2SD? And if yes, which types of partitions? I have an ext2 partition but it does not work on cm7-based JellyBread v5.
How do I partition it to ext4 through TJstyle's cwm 5?
KaiserOrn said:
I putt all as linked and i have ONLY10 MB free it is normal ?
Click to expand...
Click to collapse
How many applications you have installed? I've with default apps installed about 60 apps and 110 MB free. After install ROM I installed this:
http://forum.xda-developers.com/showthread.php?t=2157251
After, I install Link2SD and it is it. My applications:
---------- Post added at 03:29 PM ---------- Previous post was at 03:26 PM ----------
freak744 said:
Does CM 7/10 support Link2SD? And if yes, which types of partitions? I have an ext2 partition but it does not work on cm7-based JellyBread v5.
How do I partition it to ext4 through TJstyle's cwm 5?
Click to expand...
Click to collapse
Need be ext3 or ext4. JellyBread I don't tried.
I don't partition with CWM. I do it with MiniTool Partition Wizard Home Edition. I installed it on PC and I connect phone with PC over USB.
I open MiniTool ... and made partition.
Select FAT32 Primary partition and ext4 Primary partition.
http://forum.xda-developers.com/wiki/SD_card_partitioning
ZmisiS said:
How many applications you have installed? I've with default apps installed about 60 apps and 110 MB free. After install ROM I installed this:
http://forum.xda-developers.com/showthread.php?t=2157251
After, I install Link2SD and it is it. My applications:
Click to expand...
Click to collapse
I have less 40 apps but no space, it is very strange but i don't understand why this happen. Do u have any idea? Can u ask inside BALTROM topic pls
EDIT: I don't understand very well what this app "Odex Me" work. If i use it i cannot not any type of theme so my phone will be all back and similar to terminal ?
KaiserOrn said:
I have less 40 apps but no space, it is very strange but i don't understand why this happen. Do u have any idea? Can u ask inside BALTROM topic pls
EDIT: I don't understand very well what this app "Odex Me" work. If i use it i cannot not any type of theme so my phone will be all back and similar to terminal ?
Click to expand...
Click to collapse
With Odex Me free memory in Internal memory is bigger.
ZmisiS said:
With Odex Me free memory in Internal memory is bigger.
Click to expand...
Click to collapse
Can u explain me what kind of limitation give this kind of application pls? I don't understand very well from its topic
KaiserOrn said:
Can u explain me what kind of limitation give this kind of application pls? I don't understand very well from its topic
Click to expand...
Click to collapse
I don't understand you. I used OdexMe.apk and Link2SD. Since then I have internal memory and more than I need. I have no interference or slowing down the system. All works O.K.
Do u suggest me, to re-install all over again using your same application order?
KaiserOrn said:
Do u suggest me, to re-install all over again using your same application order?
Click to expand...
Click to collapse
Go in CWM. Now go on wipe data reset, wipe cashe partition and in Advanced, go on wipe dalvik cashe. Flash ROM. After flash ROM again go on wipe data reset, wipe cashe partition and in Advanced, go on wipe dalvik cashe. Reboot Phone. Wait to system up, and it is about 5 minutes.
On SD Card you need have ODEXME.apk. Download it from here:
http://forum.xda-developers.com/showthread.php?t=2157251
Install Root Explorer. Open it and copy odexme.apk and paste it in system/app. Made Permissions for this .apk (rw,r,r). Reboot Phone. After Reboot Phone go in Applications and click on this Odexme.apk and follows instructions. Reboot Phone. After Reboot Phone open Root Explorer and go in system/app and check whether each application has its odex. If have, it is it.
Now install Link2SD. Open Link2SD and select ext4. Wait to make script. When made script, you will notification than script is made. Reboot Phone. After Reboot Phone, open Link2SD, go on Settings and check Auto link. Exit from Link2SD.
Before, you for Link2SD need partition SD Card on Primary FAT32 and primary ext4.
ZmisiS said:
How many applications you have installed? I've with default apps installed about 60 apps and 110 MB free. After install ROM I installed this:
http://forum.xda-developers.com/showthread.php?t=2157251
Click to expand...
Click to collapse
I have try to resinstall all. After ROM install (BALTROM), I have chose from explorer manager the app that i must install. I start it and it automatically restart my devide several time. After it finished, I have try to go into settings but every time cellphone crash (shut down).
Do u have any ideas?
KaiserOrn said:
I have try to resinstall all. After ROM install (BALTROM), I have chose from explorer manager the app that i must install. I start it and it automatically restart my devide several time. After it finished, I have try to go into settings but every time cellphone crash (shut down).
Do u have any ideas?
Click to expand...
Click to collapse
I not use BALTROM. I don't know. I use CM10.1.4 of Jenkins.
Do u know if CM10.1.4 is fully translate in Italy? Because otherwise my parents cannot understand English
Related
Hi there first of all sorry for my wrong section and double post but in general forum nobody helped me.
My problem is:i partitionate my 4gb sd card via cwm recovery(512 ext-256swap).
Format cache partiotions.(cwm)
Format sd card.(cwm)
After that i create a fs.data2sd with mmcblk0p2 insde in sdcard/android/data/g3mod.
I install link2sd application but when i start it it tell me that my ext is not mounter.
In Cwm recovery when i press mount sd-ext it gave me an error(i think is:``the file exists already`` or something like this).
In settings/storage my phone tell me i have a 3gb card...so i think partition is done succefully..
So can someone explain what i need to do further.
Thanks alot for you help and i am glad to be member of Xda!
edit:now my sd card is stucked at 3gb how can i extend it back to 4gb?
mod Edit : thread CLOSED u cant do a dual post u need to be patient when posting
use the general or the Q&A(this is a stiky)
Just unmount your card from SdCard and Internal space menu and then format it.
or else you can also format it from CWM recovery.
mohitgalaxy3 said:
Just unmount your card from SdCard and Internal space menu and then format it.
or else you can also format it from CWM recovery.
Click to expand...
Click to collapse
for what is this?and what do you mean ``unmount your card from sdcard?``
i format card but it show 3gb
ghiurtuv said:
for what is this?and what do you mean ``unmount your card from sdcard?``
i format card but it show 3gb
Click to expand...
Click to collapse
This is to format ur sd card to get the 3.6.....gb space back...
unmount it and then format it, or else format it using CWM.
mohitgalaxy3 said:
This is to format ur sd card to get the 3.6.....gb space back...
unmount it and then format it, or else format it using CWM.
Click to expand...
Click to collapse
k i managed to have back 3.6 gb now how can i use data2sd?I think i need to repartitionate.
one more question:can i partition with MiniTool partition wizard(via windows) with usb ?(i don`t have card reader)
ghiurtuv said:
k i managed to have back 3.6 gb now how can i use data2sd?I think i need to repartitionate.
one more question:can i partition with MiniTool partition wizard(via windows) with usb ?(i don`t have card reader)
Click to expand...
Click to collapse
First of all Mini partition is basically used to convert partition...
I'll tell you my way by which I create partition.
1. Boot into Recovery->advanced->partition SD card.
2.ext->256, swap-> 128 or 64.
3. Wipe data, wipe cache, wipe dalvik cache....reboot.
4. phone will take 10 to 15 min.
This trick work on kyrillos 7, if you are on any other ROM like sumee 4 then just cope the fs.convert file in fugumod folder on sd card.
I tested this on both roms....you can check the app2sd partition on titanium back up as well as in internal memory in settings.
That's it man....enjoy.
mohitgalaxy3 said:
First of all Mini partition is basically used to convert partition...
I'll tell you my way by which I create partition.
1. Boot into Recovery->advanced->partition SD card.
2.ext->256, swap-> 128 or 64.
3. Wipe data, wipe cache, wipe dalvik cache....reboot.
4. phone will take 10 to 15 min.
This trick work on kyrillos 7, if you are on any other ROM like sumee 4 then just cope the fs.convert file in fugumod folder on sd card.
I tested this on both roms....you can check the app2sd partition on titanium back up as well as in internal memory in settings.
That's it man....enjoy.
Click to expand...
Click to collapse
i this moment i partitionate with http://forum.xda-developers.com/wiki/index.php?title=SD_card_partitioning
i will try if it doesn`t work i will try again your metod..
p.s:i need any app for that?or what should i make to mode my apps into ext?
ghiurtuv said:
i this moment i partitionate with http://forum.xda-developers.com/wiki/index.php?title=SD_card_partitioning
i will try if it doesn`t work i will try again your metod..
p.s:i need any app for that?or what should i make to mode my apps into ext?
Click to expand...
Click to collapse
you will just need CWM nothing else....
Harry move this thread........
mohitgalaxy3 said:
you will just need CWM nothing else....
Harry move this thread........
Click to expand...
Click to collapse
right now i partitionae with your method i will reply in 5 minutes to tell you if it`s work!
Really appreciate your replies and your help!
ghiurtuv said:
right now i partitionae with your method i will reply in 5 minutes to tell you if it`s work!
Really appreciate your replies and your help!
Click to expand...
Click to collapse
On which ROM you are?
Kyrilos 7 Oc and utliamte 1.4 g3mod kernel
I have another problem now:when i connect usb to pc my phone os not recognized
p.s:i press df on terminal emulator and i don`t see any ext or anything like this.
Finaly i connect to pc but i think data2sd is not working...i install titanium and link2sd...in titanim it show me like this:
System ROM:219MB(20.0 MB free)
Internal: 201MB(77.2MB free)
Sd card: 3.31GB(3.31GB free)
in link 2sd it tell me mount script error.
i need to do domething more?
edit:i choose 512 mb for ext
ghiurtuv said:
Kyrilos 7 Oc and utliamte 1.4 g3mod kernel
I have another problem now:when i connect usb to pc my phone os not recognized
p.s:i press df on terminal emulator and i don`t see any ext or anything like this.
Click to expand...
Click to collapse
Turn on USB debugging and then mount...
I don't know about df command buddy but you can see your a2sd partition in titanium backup.
mohitgalaxy3 said:
Turn on USB debugging and then mount...
I don't know about df command buddy but you can see your a2sd partition in titanium backup.
Click to expand...
Click to collapse
Try G3 mod app to convert partitions...
mohitgalaxy3 said:
Try G3 mod app to convert partitions...
Click to expand...
Click to collapse
I have a file fs.curent in g3mod folder and is like this
ext2
ext4
ext2
i think is converted...but how this help me?cuz in titanium backup i don`t see any a2sd memory..
omg idk why but on my phone nothing work..)
i put in android/data/g3mod fs.data2sd
i restart my phone and now my internal memory it shows 0.00 and in titanium backup i only have system rom and Sd card.
Should i remove fs.data2sd?
ghiurtuv said:
omg idk why but on my phone nothing work..)
i put in android/data/g3mod fs.data2sd
i restart my phone and now my internal memory it shows 0.00 and in titanium backup i only have system rom and Sd card.
Should i remove fs.data2sd?
Click to expand...
Click to collapse
No idea..........try fugumod kernel...remove all the files
I try fugumod 2.2 BE oc 1300mhz...but i think not kernel is problem...
Can anyone help me?pls...
edit:nothing changed on fugumod...i don`t see a2sd in titanium!
thanq for viewing ma thread.. i moderate noob cz i researched many things about rooting, flashing, etc., but still i have some confusions..
basically i rooted my htc explorer with jaggy rooting tutorial. so now i want to flash with [DEV][ROM][ICS][4.0.4][IMM76L]Unofficial CyanogenMod 9.1 for Pico Build#9 {3/11/2012} rom.. buti have somedoubts pls kindly clarify me..
1. is there any problem with cm9.1. i read that it drain in half a day even in normal use.. is that true..
2. now i have Yannou's recovery..can i flash thru that..
3. before flashing should i partition ma sd card or can we do dat after flashin?? if i should do partition which is best ext2/3/4 or fat32. now ma sd card isnt partitioned once also. so can i do before flashing then after have to move cm9.1 rom zip file to sd card.
4. i read that partition can also be done with recovery menu.. is that true. if yes. how to do that.. i read partition for s2e(http://forum.xda-developers.com/showthread.php?t=1859691- here) what about link2sd.. can we partion for link2sd by(http://forum.xda-developers.com/showpost.php?p=29724634&postcount=3 ) with that can we do.. will it work for cm9.1.
5. i read instruction for for flashing cm9.1 rom. there are two different methods which one to follow.
Installation
First time installing CyanogenMod 9 to your Htc Explorer/Pico, or coming from another ROM:
- Make sure you're running a proper working ClockworkMod-Recovery
- Copy GApps and CM9 ZIPs to your SDCard
- Boot into Recovery
- Flash CM9 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore data using Titanium Backup! they might cause FC's
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible! (metioned in http://forum.xda-developers.com/showthread.php?p=29938916) or (http://forum.xda-developers.com/showpost.php?p=33608084&postcount=2897).
please help me.. waitin for ua valuble reply..
Guide
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
Remember to hit the thanks button! It won’t hurt, I promise
bijgu said:
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
Remember to hit the thanks button! It won’t hurt, I promise
Click to expand...
Click to collapse
did u use CM9.1 .
is flashing process is same for yannou’s recovery.
i know about yannou’s recovery.. but what about CWM recovery.. from where i can get dat.. cus jaggy flashing process providing only yannou’s recovery.. so how can i shift to CWM recovery..
bijgu said:
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
is it necessary to wipe dalvik bcause i didnt do it and it works fine
Click to expand...
Click to collapse
No, no, stick with yannou's! Official cwm sometimes give's mounting issues with our phone, and sometimes if you drain fully your battery you'll get in to adventure.
Yes flashing process is the same, basikly everything is the same as cwm
Install ROM Manager on your phone and the first option should be to install Clockworkmod Recovery. Follow the instructions on screen. I'd use yannou's recovery though.
Yes, the instructions are the same for yannou's recovery.
And yes, I've used cm9.1 for over 2 months. I'm using HTC sense 4.0a rom by derefas right now
Remember to hit the thanks button! It won’t hurt, I promise
cool
shree alwaz said:
thanq for viewing ma thread..
Click to expand...
Click to collapse
Here is my opinion and instruction
1. is there any problem with cm9.1. i read that it drain in half a day even in normal use.. is that true..
Click to expand...
Click to collapse
I am not sure about the build #9 but build #11 is really cool.. Here is the link. U also get the link form the post u mention above under the page 305
http://teamthundersquad.blogspot.in/2012/11/cm-9-nightly-build-11-for-htc-explorer.html
But as far i heard nothing wrong with build#9 too. So try both..
Click to expand...
Click to collapse
2. now i have Yannou's recovery..can i flash thru that..
Click to expand...
Click to collapse
Nothing serious with this matter. Almost all recovery will work with this ROM. But my opinion is use TWRP recovery, it provide lot of feature also its provide touch support and ext partition support also....
Click to expand...
Click to collapse
3. before flashing should i partition ma sd card or can we do dat after flashing?? if i should do partition which is best ext2/3/4 or fat32. now ma sd card isnt partitioned once also. so can i do before flashing then after have to move cm9.1 ROM zip file to SD card.
Click to expand...
Click to collapse
its depends upon Ur need man. If Ur going to use internal memory increasing script u must have an 2nd partition in Ur SD card. ext2/3/4 is depend upon the memory script and ROM Ur going to use..
My Suggestion:
Try m2sd script with ext4 partition its work like a charm.. but i read from some post ext4 will damage SD sooner. but perform better. i am always need performance. but i am sure that till now no damage or performance issue occurred in my SD card as well as phone.
before or after partition is ur choice when u need partition u do it. But some ROM need 2nd partition while flashing be careful on that but cm9.1 doesn't need any support from sd card
Click to expand...
Click to collapse
5. i read instruction for for flashing cm9.1 rom. there are two different methods which one to follow.
Installation
Click to expand...
Click to collapse
Both the instruction telling the same thing for u. Here is my guide as same like they stated...
1.copy Ur ROM and GAPPS zip to ur SD-card
2.wipe all the partition data,cache,system,dalvik,etc... except SD-card
3.install ROM zip then install GAPPS zip.
4.Then reboot..
5.wait until u get the home screen.. first boot take some time so be patient
6.After that leave Ur phone for a minute then once again restart Ur phone.
7. final but important click thanks to the Developer and other who help u to install the ROM successfully..
this instruction is for clean installation this will never lead Ur device to problem
Click to expand...
Click to collapse
thanq u all.. but i have some clarification about partiton only.. can anybody give me guide about partitons for CM9.1 . which is best, simple and error free, wheather to go partition then flashing or flashing then partition.. and plz give me guide thru recovery.. and where its pre or post flashing.. pls do needful..
edit :
im unable to figure it out abot s2e scripts, int2sd scripts.. so please tell me actually what are those and how the linked with ext2/3/4 partitioms..
Its simple if ur using recovery for partition u will lose all the data in SD card. So use mini partition wizard tool for make partition.. after or before flashing is does not matter if u going to add memory script then partition memory card... then add the rom zip then flash it..
Sent from my HTC Explorer A310e using xda app-developers app
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
vasanth3008 said:
Its simple if ur using recovery for partition u will lose all the data in SD card. So use mini partition wizard tool for make partition.. after or before flashing is does not matter if u going to add memory script then partition memory card... then add the rom zip then flash it..
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Can u explain what are those sd scripts. What it'll do with the partition. Plz explain me.
Sent from my HTC Explorer A310e using xda app-developers app
tatiraju.rishabh said:
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
Click to expand...
Click to collapse
After partition how to make scrpits for partition. Plz I heard that int2sd, mount2sd sripts. What are those.
Sent from my HTC Explorer A310e using xda app-developers app
shree alwaz said:
After partition how to make scrpits for partition. Plz I heard that int2sd, mount2sd sripts. What are those.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
I have never used Mount2SD and int2sd
When you create a partition in your memory card, open Link2SD. Link2SD will ask you the partition type, select and tap ok. The app creates mount script by itself.
Link2SD is a 500KB app at the Play Store.
tatiraju.rishabh said:
I have never used Mount2SD and int2sd
When you create a partition in your memory card, open Link2SD. Link2SD will ask you the partition type, select and tap ok. The app creates mount script by itself.
Link2SD is a 500KB app at the Play Store.
Click to expand...
Click to collapse
So which is best link2sd or mount2sd for cm9.1 built 11. Can do parttion after flashing cm9.1. My doubt is if I flash the rom then Rom considers the memory of 150mb. So then after if I make patition will it change its internal memory from 150mb to partitioned memory. Pls. Explain me. Anyone.
Sent from my HTC Explorer A310e using xda app-developers app
Nobody don't know about ma query. Help me guys.
Sent from my HTC Explorer A310e using xda app-developers app
tatiraju.rishabh said:
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
Click to expand...
Click to collapse
Previously i flashed cm 9.1 build 11 by ayushrox but it was giving me some problems 1.wifi was not working it always showed an error 2.when i tried to reboot or switch off my cell it used to get hang so i had to remove and re insert battery to make it work ... now i've switched back to build 9 and its running fine except for the video i record have no sounds in them but thats ok for me coz i usually dnt use my cell camera
help
please temme. today i wanna flash the cm 9.1. plz temme which is best built9 or 11.. what do u people say which is best for daily use, all things should work, games should support like backstab, shadowgun, nfs mostwanted like that.. and it should not drain fast.
n i wanna make partition of ma 8GB class4 sd card before flashing using mini partiton tool. so which is best ext2/3/4 or fat32. n which is best link2sd, mount2sd or anything else. and i no need to create/modify/change the mounts for those apps to use.. cz im not able to figure out what is that mounts acctually. n what is the use of those mount. if anybody explains about those im very much gladful.
n before partition i need to take backup.. it mean i need just copy paste the all the folder which are there in sd card.. its that correct or any method to use.. to get backup.
finally give me exact intraction to flash.. consider i had partiton sd card..
pls help.. ill make flash n wanna eat icecream sandwich today it self.. :crying:
ZaKa123 said:
Previously i flashed cm 9.1 build 11 by ayushrox but it was giving me some problems 1.wifi was not working it always showed an error 2.when i tried to reboot or switch off my cell it used to get hang so i had to remove and re insert battery to make it work ... now i've switched back to build 9 and its running fine except for the video i record have no sounds in them but thats ok for me coz i usually dnt use my cell camera
Click to expand...
Click to collapse
I never had any of those problems.
---------- Post added at 05:56 PM ---------- Previous post was at 05:48 PM ----------
shree alwaz said:
So which is best link2sd or mount2sd for cm9.1 built 11. Can do parttion after flashing cm9.1. My doubt is if I flash the rom then Rom considers the memory of 150mb. So then after if I make patition will it change its internal memory from 150mb to partitioned memory. Pls. Explain me. Anyone.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
I never used Mount2SD and never will, cos link2sd works well for me.
Here is what i did:
1. Partition microSD with format ext2. (I used Minitool Partition Wizard for this. A freeware program for Windows)
2. Insert it in the phone, download Link2SD from Play Store.
3. Open Link2SD, it will prompt you to select your partition type. Select ext2.
4. Link2SD will create a mount script and ask you to restart the phone. Do so.
5. After restart, go back to Link2SD, press menu button to open menu.
6. Open "Settings". Make sure "Auto link" is ticked.
7. Exit Link2SD, do a restart.
Thats it! now whenever i install an app, Link2SD sends it to the partition automatically.
Sometimes you may get a phone memory full notification. In that case power off your phone and on it again.
EDIT: all this was done with CM9.1 previously installed.
So what are steps to install cm9.1.
Is it necessary to clear dalvik cache.
Sent from my HTC Explorer A310e using xda app-developers app
Need help and can't post in the thread required because i'm new. I installed explorerman's rom xenon system http://forum.xda-developers.com/showthread.php?t=2048312 which installs great but after install and rebooting several times I still have an internal storage issue. I have a 32gig SD partitioned with a 4gig ext3 partition, when the rom boots I get an error about internal storage then I get an error about the m2sd app saying the script is either missing or out of date. I follow the instructions and update through m2sd then, after a few minutes reboot the phone. Next it still say's the internal memory is full, 1mb free and m2sd still showing errors with no data moved to the sd-ext. I tried a 4gig sd card with a 1 gig ext3 partition but still the same problem.
I am doing as said and wiping dalvik cache etc. I have a backup of the ONLY rom that works which is based on android 4.03 but I want the original setup back on the phone so any help needed and please, no stupid comments or immature comments as I have seen from some posts here. i'm not a child but at the same time I am not a tech-head, thanks.
scotslad2k said:
Need help and can't post in the thread required because i'm new. I installed explorerman's rom xenon system http://forum.xda-developers.com/showthread.php?t=2048312 which installs great but after install and rebooting several times I still have an internal storage issue. I have a 32gig SD partitioned with a 4gig ext3 partition, when the rom boots I get an error about internal storage then I get an error about the m2sd app saying the script is either missing or out of date. I follow the instructions and update through m2sd then, after a few minutes reboot the phone. Next it still say's the internal memory is full, 1mb free and m2sd still showing errors with no data moved to the sd-ext. I tried a 4gig sd card with a 1 gig ext3 partition but still the same problem.
I am doing as said and wiping dalvik cache etc. I have a backup of the ONLY rom that works which is based on android 4.03 but I want the original setup back on the phone so any help needed and please, no stupid comments or immature comments as I have seen from some posts here. i'm not a child but at the same time I am not a tech-head, thanks.
Click to expand...
Click to collapse
try other scripts which is supported by that rom
bloodhound42 said:
try other scripts which is supported by that rom
Click to expand...
Click to collapse
I wouldn't know how to, I just trust the developer and since the rom does everything I wouldn't know where to look. the last time I tried editing a rom zip, it wouldn't install because it didn't match the original signature of the zip file. Also, because I am a new forum user, I can't contact the developer directly for some help.
Make 1 gb partition(Enough)! As the script uses 100mb of internal for every 500mb sd-ext....so making 3gb is useless.
Plus while configuring the app disable safe mode and see if that helps
Parth_14 said:
Make 1 gb partition(Enough)! As the script uses 100mb of internal for every 500mb sd-ext....so making 3gb is useless.
Plus while configuring the app disable safe mode and see if that helps
Click to expand...
Click to collapse
Will try that, thankyou
Nope, didn't work, wiped the SD card and made a 1gig ext3 partition, also disabled safe-mode as suggested, still loads EVERYTHING to internal memory with 1mb left, it also comes up with a busybox error and a script error on first boot. I went into M2SD and set apps, data and delvik to use the sd-ext partiotn and waited, nothing, so rebooted the phone, nothing. All with the same message of 'The current status does not match your settings for this option' under Applications, Data and Delvik Cache, also 'Could not set the sdcard readahead' which is set to 512 as default.
scotslad2k said:
Nope, didn't work, wiped the SD card and made a 1gig ext3 partition, also disabled safe-mode as suggested, still loads EVERYTHING to internal memory with 1mb left, it also comes up with a busybox error and a script error on first boot. I went into M2SD and set apps, data and delvik to use the sd-ext partiotn and waited, nothing, so rebooted the phone, nothing. All with the same message of 'The current status does not match your settings for this option' under Applications, Data and Delvik Cache, also 'Could not set the sdcard readahead' which is set to 512 as default.
Click to expand...
Click to collapse
Try this...
http://forum.xda-developers.com/showthread.php?t=1907663
Sent from my Micromax A110 using Tapatalk HD
try this
use INT2EXT
http://forum.xda-developers.com/showthread.php?t=1716124
download the zip file and open it file manager using mobile (root explorer..)(set r/w permission) then find init.d folder inside INT2EXT script copy and put it into
system->etc-> init.d
paste it..
then reboot
Seems like a nand burn flash mimicm9 and see internal memory and tell without any scripts
Sent from my HTC Explorer A310e using xda premium
scotslad2k said:
Need help and can't post in the thread required because i'm new. I installed explorerman's rom xenon system http://forum.xda-developers.com/showthread.php?t=2048312 which installs great but after install and rebooting several times I still have an internal storage issue. I have a 32gig SD partitioned with a 4gig ext3 partition, when the rom boots I get an error about internal storage then I get an error about the m2sd app saying the script is either missing or out of date. I follow the instructions and update through m2sd then, after a few minutes reboot the phone. Next it still say's the internal memory is full, 1mb free and m2sd still showing errors with no data moved to the sd-ext. I tried a 4gig sd card with a 1 gig ext3 partition but still the same problem.
I am doing as said and wiping dalvik cache etc. I have a backup of the ONLY rom that works which is based on android 4.03 but I want the original setup back on the phone so any help needed and please, no stupid comments or immature comments as I have seen from some posts here. i'm not a child but at the same time I am not a tech-head, thanks.
Click to expand...
Click to collapse
u have to freshly install the xenon and after installing and completing setup open mount2sd and it will give u a window says install busybox and install the script somthing like that ...click on the both and after green check mark reboot ur pico....if the problem still there then check the partition ...use recovery to partition ur sd card.
scotslad2k said:
Need help and can't post in the thread required because i'm new. I installed explorerman's rom xenon system http://forum.xda-developers.com/showthread.php?t=2048312 which installs great but after install and rebooting several times I still have an internal storage issue. I have a 32gig SD partitioned with a 4gig ext3 partition, when the rom boots I get an error about internal storage then I get an error about the m2sd app saying the script is either missing or out of date. I follow the instructions and update through m2sd then, after a few minutes reboot the phone. Next it still say's the internal memory is full, 1mb free and m2sd still showing errors with no data moved to the sd-ext. I tried a 4gig sd card with a 1 gig ext3 partition but still the same problem.
I am doing as said and wiping dalvik cache etc. I have a backup of the ONLY rom that works which is based on android 4.03 but I want the original setup back on the phone so any help needed and please, no stupid comments or immature comments as I have seen from some posts here. i'm not a child but at the same time I am not a tech-head, thanks.
Click to expand...
Click to collapse
Why you don't install cm10.1 beta 3. Its great and cool and stable to. Based on 4.2.2. Android os install link2sd and make both partition of fat32 by mini tool and don I have this problems when install the ROM you have then after I do this I have 8 GB SD card 1 GB fat 32 partition and other for data. Alls going good smooth stable. And a have 43 app installed on my pico and remaining internal memory showing 87 mb my good suggestion is to change ROM .
And give a time to the developers of (explorerman's rom xenon system) to make the ROM best
sent from my HTC explorer having ROM cm10.1 beta 3.
using xda app the best developers site for android :thumbup:
rajat836 said:
u have to freshly install the xenon and after installing and completing setup open mount2sd and it will give u a window says install busybox and install the script somthing like that ...click on the both and after green check mark reboot ur pico....if the problem still there then check the partition ...use recovery to partition ur sd card.
Click to expand...
Click to collapse
Did all that, I always do a complete clean of the phone before I try anything but still not working. I think, because it was a T Mobile HTC Explorer rather than a generic one that there is something hard coded into it. I see through the forums so many people having no problems at all but they have generic phones rather than unlocked phones from service providers. I am not a programmer so this is just guess work and from experience, I can't even restore the phone using an RUU because it will only accept a T-Mob one. If there a way to replace the entire software on the phone then I would but it's programmed into the chips at factory level (low level) since the phone was produced by HTC for T-Mobile. If the phone had been bought directly from HTC then there would be less problems. So far, I haven't found a single rom that doesn't have some kind of problem with this phone.
Thanks for all the suggestions but I'm guessing it's time to 'pick a window' for it and just save up for a more modern phone than trying to keep this HTC Pensioner going.
Hi
I have my HTCExplorer(pico) hosting a 16GB SDcard of 12GB+fat32+primary and 2GB+ext3+primary+sd-ext label partitions.
I have installed CM11 RC1 ROm on my phone, as described in the first page of the ROM development thread. But still without any additional apps installed I'm left with 25MB internal memory only.
What I did .....
1. copied the ROM and GAPPS to my SDCard from my laptop
2. Reboot into recovery
3. wipe all data/factory reset
4. mount sd-ext partition
5. installed the ROM
6. reboot the phone
7. after the first reboot, again rebooted to recovery
8. now this time installed GAPPs
9. again reboot the phone
Now, only 25MB left in my phones internal memory. Seems like the int2ext script is not working which is included in the ROM (I believe).
wyswyg said:
Hi
I have my HTCExplorer(pico) hosting a 16GB SDcard of 12GB+fat32+primary and 2GB+ext3+primary+sd-ext label partitions.
I have installed CM11 RC1 ROm on my phone, as described in the first page of the ROM development thread. But still without any additional apps installed I'm left with 25MB internal memory only.
What I did .....
1. copied the ROM and GAPPS to my SDCard from my laptop
2. Reboot into recovery
3. wipe all data/factory reset
4. mount sd-ext partition
5. installed the ROM
6. reboot the phone
7. after the first reboot, again rebooted to recovery
8. now this time installed GAPPs
9. again reboot the phone
Now, only 25MB left in my phones internal memory. Seems like the int2ext script is not working which is included in the ROM (I believe).
Click to expand...
Click to collapse
You need to use mounts2sd or Put a script.. In init,d folder and restart.. Your memory will be increased..
Dont know how to copy paste script : Check here
Thank you for your reply.
But AFAIK, the sd-ext script is already included in the ROM as this post says.
So, if the script is there it should work. Anyway I'll try your methods today and will post the results here.
wyswyg said:
Thank you for your reply.
But AFAIK, the sd-ext script is already included in the ROM as this post says.
So, if the script is there it should work. Anyway I'll try your methods today and will post the results here.
Click to expand...
Click to collapse
Yes i agree its already there i think you will find that in settings-> extras(I dont remeber that much but it is there only) mounts sd-ext something like that.. Tick on it see if that increases AFAIK it does increase the memory..
shubhojit89 said:
Yes i agree its already there i think you will find that in settings-> extras(I dont remeber that much but it is there only) mounts sd-ext something like that.. Tick on it see if that increases AFAIK it does increase the memory..
Click to expand...
Click to collapse
OMG! Man, you nailed it on the head.
Many thanks to you.
Just goto Settings -> Device ->Extra > Enable sd-ext for /data, that's it. Now I'm enjoying my 2GB internal memory :victory:
But apart from this, I can see the speaker sound is very low (in calls) even if it is at 100% as compared to my previous MiniCM9 ROM.
Any pointer champs?
wyswyg said:
OMG! Man, you nailed it on the head.
Many thanks to you.
Just goto Settings -> Device ->Extra > Enable sd-ext for /data, that's it. Now I'm enjoying my 2GB internal memory :victory:
But apart from this, I can see the speaker sound is very low (in calls) even if it is at 100% as compared to my previous MiniCM9 ROM.
Any pointer champs?
Click to expand...
Click to collapse
I think there is no workaround for low volume on the ROM and none of the users reported the sound being low.. So to Say there is no workaround for it..
Well another thing i would like say.. The default script is int2ext+ which leaves /data to /data and app to /ext..
If you are the user who uses apps alot at some point of time you will face low memory notification.. So for that you need to use int2ext.. You will find the script and method in 2nd post.
Cant increase internal memory. I tried Link2SD, Minitool partition wizard, INT2EXT, INT2EXT+, INT2EXT4, INT2EXT4+, INT2EXTV2+ and nothing worked! I use this ROM http://forum.xda-developers.com/showpost.php?p=54007024&postcount=2021
Please help, thanks in advance!
felix311 said:
Cant increase internal memory. I tried Link2SD, Minitool partition wizard, INT2EXT, INT2EXT+, INT2EXT4, INT2EXT4+, INT2EXTV2+ and nothing worked! I use this ROM http://forum.xda-developers.com/showpost.php?p=54007024&postcount=2021
Please help, thanks in advance!
Click to expand...
Click to collapse
Hi I discovered a guide: [Guide][07/03/2014] CM11 installation, Memory problem in your devices development forum which appears to address this issue. From the thread:
If you are a user who doesnt install use or install many apps but want the memory increase:
Just go in settings-> Extras->Tick on /mount /sd ext option->Restart your device.(Not for RC2 as there is no option to enable ext))
If you are using many apps then refer this: (Its int2ext)Script or else you wont be able to download apps from playstore.
The reason for not able to install apps from playstore
The inbuilt script is int2ext+ Which leaves /data to /data (The reason and explanation in detail Check Here)
List of all scripts working check here: Cronmod Scripts
How to copy paste scripts and list of scripts : Check here
If you dont want to do any copy and pasting of scripts just follow this steps:
1. Open the rom zip .. Dont extract
2. Go to system/etc/init.d
3. Now copy the above script in the location given in 2nd step.. It will ask for replace replace it..(Not applicable on RC2)
4. Now flash the rom.
5. Done
Click to expand...
Click to collapse
I hope this sorts your issue out
I think this can help me out, thank you very much! But i cant open Click Here in your thread :/
Oh nothing, i foud it Thanks again.