im having a XDA2i and i have no idea to install dkatoday. i have tried it by installing it to windows directory but wat it says is thAT i need to have a program to run.can you pls help me
Just copy it over to your device and click on it. Then find the 1.79 .dll and replace the existing one.
Everything you need to know about dktoday is in this thread
unable to extract or execute the RhodiumW_hardSPL_V1_10R3.exe file.
I have downloaded the RhodiumW-HardSPL_V1_10R3_100HSPL.zip but I can't extract or execute the RhodiumW_hardSPL_V1_10R3.exe file. I am using WinZip / 7 Zip and I can see the RhodiumW_hardSPL_V1_10R3.exe file, I select to extract it to a folder I created and the colored buttons in the lower right of winzip go from red to green like it's supposed to but nothing extracts to the folder, it's empty. I double click RhodiumW-HardSPL_V1_10R3_100HSPL.exe within WinZip and I get this error 'WinZip was unable to extract 'RhodiumW_hardSPL_V1_10R3.exe', terminating operation'. I have tried this on two separate systems but I get the same results.
Any help would be greatly appreciated...
Thanks every one.......
Error is --
! Cannot execute "C:\DOCUME~1\USER\LOCALS~1\Temp\Rar$EX00.781\Rhodi umW-HardSPL_V1_10R3.exe"
-Satsih
You may have a corrupted file. Try downloading it again. I just downloaded the zip file and it extracted with no problems.
Hi too all i am trying to root my alcatel ot 985 and i need to install some usb_host_driver, when i came in at that folder i have win64/32, later WNET/VISTA, and later IA64/AMD64 and later qcusbser.cat and qcusbser.sys have a readme too, i need to install that for continuing process of rooting, so please somehow help me guys. Thanks a lot in advance.
Cheers, Nemanja. :good:
Usually to install a driver there have to be an *.inf file in a folder.
So, maybe the file is placed somewhere in a superior folder.
Using windos 7 you just have to highlight the top folder and let Windows search the file itself.
Using XP you have to search the file yourself.
Worst case is, that there is no such file.
This means you have to download something lice a sync-software from alcatel homepage and install the whole package, because the driver is inclueded there. Just like the HTC Sync package, which contains the drivers for HTC smartphones
Hello, I have a jiayu G3T ( G3QCT ) with JB Android 4.2.1 installed , but yesterday it occurred to me to look for a custom rom 4.2.2 , I downloaded the rom, and follow the instructions ( wipe data / factory reset wipe cache && && wipe dalvik ) then install the new rom, everything seems to be right , but when the phone rebooted , I noticed that said " INVALID IMEI " and did not detect the SIM card ...
I have no backup of the IMEI ( if I have the sticker underneath the battery)
I reinstalled the rom I had before jiayu , which comes standard rooted ,I have tried uncle tools and the application of jiayu , I entered the engineer mode so I went to connectivity CDS information Radio information, phone 1 & 2 wrote 2 lines (one for each option )
AT + EGMR = 1.7, " IMEI "
AT + EGMR = 1.10 , " IMEI "
but when you click on send command says " command failed to send, even after pressing repeatedly says " command was mSent " but on reboot, nothing has changed, and the IMEI is still not valid .
I tried the mtkdroidtools but says it was all right , the result is the same, nothing changes
I also tested the MAUI META 3G & IMEI and SN WRITER but I have not gotten any results ...
Someone could tell me how to fix it? thanks
I'd suggest you re flash stock rom using SP Tools, then use SN Gen to create a MP0B_001 file. Then place the generated file on your SD card, use root explorer, copy the file you have placed on the SD card and move it to /data/nvram/md/NVRAM/NVD_IMEI/, and set the file's permission to rw-rw----.
Then reboot and enjoy.
stock rom
and where i cant get that stock rom? could you link it to me?
sn_gen
ViKtory36 said:
I'd suggest you re flash stock rom using SP Tools, then use SN Gen to create a MP0B_001 file. Then place the generated file on your SD card, use root explorer, copy the file you have placed on the SD card and move it to /data/nvram/md/NVRAM/NVD_IMEI/, and set the file's permission to rw-rw----.
Then reboot and enjoy.
Click to expand...
Click to collapse
the stock rom could be any of http://www.jiayu.es/software.php?soft&jiayu=G3QCT ?
I have used (4.2.1)ROM Oficial Jiayu.es 20131203-000001 (the latest) and sn_gen to recover my IMEI.... but after copy and set the permissions, and reboot, anything changes, what Im doing wrong?
tdguchi said:
the stock rom could be any of http://www.jiayu.es/software.php?soft&jiayu=G3QCT ?
I have used (4.2.1)ROM Oficial Jiayu.es 20131203-000001 (the latest) and sn_gen to recover my IMEI.... but after copy and set the permissions, and reboot, anything changes, what Im doing wrong?
Click to expand...
Click to collapse
I see that the website is in Spanish, so I may interpret the files incorrectly.
I'm gonna presume that you have already downloaded and installed the required MTK VCOM Drivers, and the device's drivers which are also given on the website. Install both if you haven't already.
I see there is a scatter loading file present under the downloads. Download the scatter loading and the latest ROM. Extract both the ROM files and the Scatter Loading file to a same single folder. Then use SPFlashtool and select the scatter loading file from the extracted folder, and check ALL the boxes.
Then remove the battery from your phone, connect the phone to the PC, and click "Download" on SP Flash Tool. After it finishes, you should see a box with a green circle, which indicates the flashing was successful.
After that, put the MP0B_001 file on your SD card, and follow the steps given by me on post #2.
And don't forget to hit thanks if I have helped. =]
tried.....but no working
ViKtory36 said:
I see that the website is in Spanish, so I may interpret the files incorrectly.
I'm gonna presume that you have already downloaded and installed the required MTK VCOM Drivers, and the device's drivers which are also given on the website. Install both if you haven't already.
I see there is a scatter loading file present under the downloads. Download the scatter loading and the latest ROM. Extract both the ROM files and the Scatter Loading file to a same single folder. Then use SPFlashtool and select the scatter loading file from the extracted folder, and check ALL the boxes.
Then remove the battery from your phone, connect the phone to the PC, and click "Download" on SP Flash Tool. After it finishes, you should see a box with a green circle, which indicates the flashing was successful.
After that, put the MP0B_001 file on your SD card, and follow the steps given by me on post #2.
And don't forget to hit thanks if I have helped. =]
Click to expand...
Click to collapse
Well... that is what I did... was unsucccessful... imei is till missing... i have contacted jiayu support.. they said me that some phone are not able to restore IMEI in a easy way..... the ask me 18€ ( $24) aswell they ask me to pay the Shipping rates... so they could try to fix it...
tdguchi said:
Well... that is what I did... was unsucccessful... imei is till missing... i have contacted jiayu support.. they said me that some phone are not able to restore IMEI in a easy way..... the ask me 18€ ( $24) aswell they ask me to pay the Shipping rates... so they could try to fix it...
Click to expand...
Click to collapse
They want to just rip money off you.. All MTK devices have only that one way of restoring device's IEMI which I have listed above., as far as I know.
You can try doing the following (This is just speculation, I have never tried this but it MAY work, as a MP0B_001 file and a backup generated by Mobileuncle MTK tools have the same output when opened via a text editor.)-
After generating an IEMI file, open it using Notepad. Then copy everything written in it, make a new notepad file and paste it there. Save that file as "IEMI.bak" file, and put that in your sd card.
Then install Mobileuncle MTK tools from Play Store, give it root access and go to IEMI backup/restore option. You should find your saved backup there. Hit restore from SD card, and pray that it works.
If it doesn't work, then I'm sorry. Send the phone over to your manufacturer if all else fails.
ViKtory36 said:
They want to just rip money off you.. All MTK devices have only that one way of restoring device's IEMI which I have listed above., as far as I know.
You can try doing the following (This is just speculation, I have never tried this but it MAY work, as a MP0B_001 file and a backup generated by Mobileuncle MTK tools have the same output when opened via a text editor.)-
After generating an IEMI file, open it using Notepad. Then copy everything written in it, make a new notepad file and paste it there. Save that file as "IEMI.bak" file, and put that in your sd card.
Then install Mobileuncle MTK tools from Play Store, give it root access and go to IEMI backup/restore option. You should find your saved backup there. Hit restore from SD card, and pray that it works.
If it doesn't work, then I'm sorry. Send the phone over to your manufacturer if all else fails.
Click to expand...
Click to collapse
well.... or Im not generaing a valid file... or it doesnt work.....:crying::crying::crying::crying::crying:
I did everything right but when I press "send AT Command" appear An error on my screen "failed to send AT command" what did I do wrong? what can I do to fix it?
How to create that MP0B_001 file ?
ViKtory36 said:
I'd suggest you re flash stock rom using SP Tools, then use SN Gen to create a MP0B_001 file. Then place the generated file on your SD card, use root explorer, copy the file you have placed on the SD card and move it to /data/nvram/md/NVRAM/NVD_IMEI/, and set the file's permission to rw-rw----.
Then reboot and enjoy.
Click to expand...
Click to collapse
How to create that MP0B_001 file please help!
Hi I have an android tv stick. I had the robot lying down with exclamation error on the stick I am trying to reprogram the stick with an updated zip file, but I don't know where to find a guide to help install this packages its a zip file that has a boot.img file and a system folder and meta-inf folder and install folder. It obviously can't be installed using the regular rk batch tool. Please help!!!!!
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Android Stick Computers
Stand by
Good luck
overrated98 said:
Hi I have an android tv stick. I had the robot lying down with exclamation error on the stick I am trying to reprogram the stick with an updated zip file, but I don't know where to find a guide to help install this packages its a zip file that has a boot.img file and a system folder and meta-inf folder and install folder. It obviously can't be installed using the regular rk batch tool. Please help!!!!!
Click to expand...
Click to collapse
Can you tell us what device you are using?
Hi,
The stick looks like the cx-803 ,but its unbranded. dual core processor. They have them on geekbuying website.