Iam using N 8010 with xxblj9 German JB firmware on it.
Recently i purchased Samsung USB connection kit ,when i tried usb and card reader its getting connected ,opening
my files ,then getting disconnected showing message USB unexpectedly removed.
Is this because of the firmware not supported or problem with usb connection kit?
Mathew
Unplug your device.
Download the latest version of Kies and install it.
Try again.
Turn USB debugging off if that doesn't work.
I can't say how close the 8010 is to the 8000 but I would assume that they would be much the same except for the 3g...
Anyway, I have a usb connector, 3rd party i found on ebay for around $10. It works fine with my usb sticks, not for anything that requires power, HDD and playstation controllers... I use a 32gb thumbdrive in it and can use it to read/write data to and from it with no errors... The one I got also has an sd card reader in it too and that works fine also...
Not sure what could be wrong with yours but would suggest going to store, playing with demo model and trying again... This will rule out the usb hub as the culprit or point the finger....
USB Connector
ultramag69 said:
I can't say how close the 8010 is to the 8000 but I would assume that they would be much the same except for the 3g...
Anyway, I have a usb connector, 3rd party i found on ebay for around $10. It works fine with my usb sticks, not for anything that requires power, HDD and playstation controllers... I use a 32gb thumbdrive in it and can use it to read/write data to and from it with no errors... The one I got also has an sd card reader in it too and that works fine also...
Not sure what could be wrong with yours but would suggest going to store, playing with demo model and trying again... This will rule out the usb hub as the culprit or point the finger....
Click to expand...
Click to collapse
Are you on stock Jelly Bean.
This happens to me only with jelly bean,i tried on ICS ,works perfectly.
So i reckon the problem is with Jelly bean OS and this could be bcz im using German firmware which is for N8000.
Mine is N8010 ,this could be the reason.
Thanks for sharing your experience.
I will look forward for original N8010 JB release,hope that would be ok for the USB Kit.
Mathew
Works fine on JB...
Usb connection
ultramag69 said:
Works fine on JB...
Click to expand...
Click to collapse
Is it, then please help me with the firmware version(name or link).
I will try it on my n8010.
Thanks in advance.
Mathew
Will the Samsung EPL-1PL0BEGXAR USB Connection Kit labeled for the Tab 10.1 work on a stock Note 10.1 (8013)?
yes it should all tab have the same connector, the connector has not much to do only certain pins combination change which give different functions
What I mean the connector itself is an passive device not an active device its like connecting the correct sequence of cable to complete the circuit, once it does that its up to the device and connecting device to communicate
Related
Hi Everyone,
I just picked upo the Samsung USB Connection Kit Plus to mount SD cards and USB sticks/drives to my Galaxy note 10.1 (N8010). I'm having an issue with this connection kit, it keeps mounting and immediately dismounting my media. It will mount just long enough for me to breifly see the list of files that are on my media and then unmount again. Is there a compatibility issue, whether it's an issue with the N8010 note, or incompatibility with the 4.1.1 Jelly Bean firmware that I have on the device? Some other setting that might be interfering (I disabled USB debugging)? The media I have tried so far are all formatted as FAT32.
If anyone has any advice on how I could remedy this issue, it would be much appreciated!
Cheers,
Nick
Faulty cable, adapter or even usb drive
Are you connecting a hard drive or pen drive, it wont support a hard drive.
If you are having the problem with usb drive then there may be an issue with the connector or pen drive check whether the pen drive works on your laptop if that is the case then for sure the connector is faulty get it replaced. Would be surprised if it does not work bec i get the cheap ones for 1.5 dollar which work great
Figured it out, kinda
So I took the connection kit back to the store and plugged it into a new Note 10.1 (8010 wifi, with stock 4.04 ICS), and it worked without issue. It looks like the connection kit either doesn't like Jelly Bean, or the fact that I have the N8000 firmware loaded onto my N8010 device. Will try the German version of the N8010 firmware to see if it works. If anyone could confirm that the connection kit works with JB it would be greatly appreciated!
Nick
Hello,
I bought one for my S3 Tivizen PICO DVBT receiver.
On Samsung S3 it works.
He does not work on the Xoom though I EOS 4.1.1 on the Xoom and have USB sticks works mount.
The problem is the DVBT part is plugged directly into the micro USB and at the moment of infecting probably a startup file on the part says that the corresponding APP opens. That is not what happened and thus no DVBT.
On the Samsung S3 but goes perfectly.
This has a real USB host mode.
EOS have 4.1.1 on the Xoom
Sorry for my english I'm German
Yeah, i have the same problem. Now i try back to original ICS, maybe this ROM will be better...
hey guys,
got my wonderful note 10.1 on christmas, some days afterwards I ordered an adapter from amazon.
well, it worked for the first 10-20 tries, but then my note doesnt recognize anything. neither the stupid adapter, nor usb-sticks or controller.
Just wondering if somebody have the same problem
I was on the german JB FW, yesterday I updated to taiwanese/chinese JB, but it still wont work.
And is it true that the note 10.1 has a special security ciruit so too powerful devices wont work?
Cause I tried my 2.5 hdd on the note, it recogniced it as a high-powered device and wont be used. (of course crap, I know)
then I tried the hdd on my galaxy s3 and it got powered. So, what did samsung ****ed up with the note 10.1.
Is some part inside faulty for this crap, or did they messed up otg with the latest jb update?? Or ist my adapter just broken?
cheers guys, I hope for response^^
alexx910 said:
hey guys,
got my wonderful note 10.1 on christmas, some days afterwards I ordered an adapter from amazon.
well, it worked for the first 10-20 tries, but then my note doesnt recognize anything. neither the stupid adapter, nor usb-sticks or controller.
Just wondering if somebody have the same problem
I was on the german JB FW, yesterday I updated to taiwanese/chinese JB, but it still wont work.
And is it true that the note 10.1 has a special security ciruit so too powerful devices wont work?
Cause I tried my 2.5 hdd on the note, it recogniced it as a high-powered device and wont be used. (of course crap, I know)
then I tried the hdd on my galaxy s3 and it got powered. So, what did samsung ****ed up with the note 10.1.
Is some part inside faulty for this crap, or did they messed up otg with the latest jb update?? Or ist my adapter just broken?
cheers guys, I hope for response^^
Click to expand...
Click to collapse
My otg worked on ics, not the best (cheap one from amazon) but worked. I updated to the german 4.1.2 and it connects then disconnects right away. Wont stay connected for more then 2 seconds. I have read about otg problems with JB but thennothers say it works fine on JB. Im lost
sent from my jelly bean infused note 10.1
USB OTG stops responding 4.2.1
Ok here is what I have found on this, I find that the first time I connect a USB Device to my Tablet after a Fresh Boot, it works Normally.
However Often times once the remove the USB OTG cable I will often loose the ability to have devices Recognized again. Also if at anytime while plunging in or un-plugin the the cables the Device sometimes says that it sees a High power device (not sure if this is caused by a short or what) but if this happens I loose all ability for devices to be recognized.
The Two things i have found that Fix this issue are.
ONE: Restart the Tablet.
Two: Un-mount and Re-mount the SD Card.
This looks to be like a issue how the new JB software and the driver for the 30pin slot. hopefully Samsung will address this issue with a hotfix or when they update to 4.2.2
In the mean time i hope this helps.
I had my 7.7 for some time and about 2 days ago i've bought a cheap chinese usb otg cable from some shoup around here. I thought it would be as simple as pluging it in and connecting some usb stick like i've done with justabout all usb otg stuff i previously owned. But it doesn`t do anything. I`ve tried other usb devices, the tab simply doesn`t power them at all. I`ve also disasembled the cable and measure it, everything is fine. I`m on stock ics 4.04, also tried a couple of kernels, it just doesn`t work.
Has anyone encountered such a problem.? Damn weird....
motoi_bogdan said:
I had my 7.7 for some time and about 2 days ago i've bought a cheap chinese usb otg cable from some shoup around here. I thought it would be as simple as pluging it in and connecting some usb stick like i've done with justabout all usb otg stuff i previously owned. But it doesn`t do anything. I`ve tried other usb devices, the tab simply doesn`t power them at all. I`ve also disasembled the cable and measure it, everything is fine. I`m on stock ics 4.04, also tried a couple of kernels, it just doesn`t work.
Has anyone encountered such a problem.? Damn weird....
Click to expand...
Click to collapse
I have an original cable but also bought an after market one that verizon had made available for their version of the 7.7
I bought it here:
http://www.wirelessground.com/samsung-galaxy-tab-wall-charger-verizon.html
Excelllent service and price. Works great and quality build
---------- Post added at 11:32 PM ---------- Previous post was at 11:24 PM ----------
whitehawk66 said:
I have an original cable but also bought an after market one that verizon had made available for their version of the 7.7
I bought it here:
http://www.wirelessground.com/samsung-galaxy-tab-wall-charger-verizon.html
Excelllent service and price. Works great and quality build
Click to expand...
Click to collapse
!
errrr....I think I misread your issue and specific item...
sorry!
Still great though!
The usb otg cable is just a plain simple usb cable with a 20kilo ohm resistor placed between 2 pins on the galaxy tab 30pin connector. That's about all the things inside the actual cable. When you plug it in, the tablet should figure out that the 20k resistor made contact with the pins and an accesory was connected. Mine doesn't. The cable is fine, i think there's something wrong with the tablet. Doesn't it supossed to power on whatever you insert on that usb port? Because i can't get those 5v on the port.
I don't know if it's a software or hardware problem....
motoi_bogdan said:
The usb otg cable is just a plain simple usb cable with a 20kilo ohm resistor placed between 2 pins on the galaxy tab 30pin connector. That's about all the things inside the actual cable. When you plug it in, the tablet should figure out that the 20k resistor made contact with the pins and an accesory was connected. Mine doesn't. The cable is fine, i think there's something wrong with the tablet. Doesn't it supossed to power on whatever you insert on that usb port? Because i can't get those 5v on the port.
I don't know if it's a software or hardware problem....
Click to expand...
Click to collapse
what file system is your USB Stick using? try formatting the stick to FAT32 and see if its a file system issue
have you tried using another OTG cable? I'm also using a china knock off bought for 4 bucks, running stock ICS and it detects most of the thumb drives I attached to it
thanks for the replies but the situation is kind of different in my case.
In order for the tablet to read what kind of filesystem you have on a usb mass storage device (stick, hdd, whatever) it must first power it on and then attempt to access it. In my case, it simply doesn't power on. So, it doesn't matter what kind of file format it has. Also, if i plug a mouse/keyboard, it won't work either.
I thought that maybe it's a broken wire inside the connector, so i took it apart and measured each pin. The otg adapter is fine, it should do the job. I've also tested on another samsung tab and it worked straight away. It seems there's something wrong with my tab. However, other then this, the 30 pin port on the tab itself seems to be working fine.
Hi all, I have had a Tab 7.7 for 12 months and have been using an OTG adaptor to copy jpegs from my camera's SD card to the external SD card in my Tab. All of a sudden the whole process has stopped working. My Tab 7.7 has ICS 4.0.4. and is NOT rooted. Previously when I plug in the OTG adaptor the File Manager appears showing the folders on the SD card in the adaptor. When I plug it in now I get the message "USB mas storage removed safely" and that's it. I was thinking I might re-flash the rom but since I can't even get Odin to load on my windows 8 PC (it flashes on the pc monitor then goes off) I really can't be bothered. I went to the trouble of running Odin on a windows 7 PC at least it loaded on 7 but wouldn't acknowledge the Tab being connected. I thought I might have a driver problem, but has anyone on this site tried downloading a driver for samsung tab 7.7, it's a bloody nightmare. You get all sorts of crap from checking what drivers are missing or outdated on your PC then having to by a copy for $29.95. I'm really over it. When I rooted my Mororola xoom 12 months ago and flashed ICS I had no problems at all, there wasn't a link like we have now that sends you to a site that takes 5 hours to download a tar file or you could buy a subscription and do it in 9 mins. Can anyone please offer any assistance with my problem before I toss it in the bin. Many thanks
Yeah maybe try a few different things connected to see what exactley is the problem.do you have any other usb things you could connect?
MRBR7 said:
Yeah maybe try a few different things connected to see what exactley is the problem.do you have any other usb things you could connect?
Click to expand...
Click to collapse
Thanks, I tried a laser mouse and the led under the mouse dosent light so I suspect the 5volt rail has gone somewhere. I'll pull the back off and check connector. I will post outcome.
Have you tried a different sd card?
murmur70 said:
Have you tried a different sd card?
Click to expand...
Click to collapse
Yes sure have, 3 to be exact. I've changed my mind about looking for 5 volts on the usb connector. I'm just not going to bother trying to connect a SD card through the USB port. Life is too short to stuff around