Hello there, I have a htc one xl on At&t rooted... it has the hboot 1.14. Everything was fine until yesterday when I tried to flash AOKP. I used flash image gui to flash the boot.img then rebooted to TWRP and wiped rom, wiped everything, then installed the .zip for the boot.img I flashed... It would say android is upgrading and cycled through all the apps but stopped at starting apps... wouldnt go past it for 6 hours. I rebooted and tried to reflash the boot.img, but computer didnt recognize phone, and TWRP showed there was nothing on the sdcard
Juts mount your sd in recovery and drag a Rom over from your computer
J3susisl0rd7 said:
Hello there, I have a htc one xl on At&t rooted... it has the hboot 1.14. Everything was fine until yesterday when I tried to flash AOKP. I used flash image gui to flash the boot.img then rebooted to TWRP and wiped rom, wiped everything, then installed the .zip for the boot.img I flashed... It would say android is upgrading and cycled through all the apps but stopped at starting apps... wouldnt go past it for 6 hours. I rebooted and tried to reflash the boot.img, but computer didnt recognize phone, and TWRP showed there was nothing on the sdcard
Click to expand...
Click to collapse
Sounds like the initial problem was just a bad flash/download. It happens.
Try unplugging your phone, shutting down and restarting into bootloader, then hooking it up.
You flashed an incompatible kernel it sounds like.
Make sure you try flashing the kernel within the ROM
Sent from my One X using Tapatalk 2
Hello everyone! Thanks for the replies. Sorry for the rushed post earlier, was on the way out the door after trying for a while to figure something out. I'd love to send a rom to it, but TWRP shows that I have 0 mb available of storage, and the computer says I must format it to access files or something. I may have forgotten to mention- I think i flashed rohan kernel b6 improperly... used flash image gui then went to recovery and clicked it and hit install ... it hung at installing for a while, and upon reboot the starting apps problem happened, followed by no rom being on there, only being able to access TWRP, and ... well, above things. If I formatted it would I be able to put twrp and everything back on it necessary to make the thing function properly? Orr.... Thanks for any help!
God bless!
P.S. Forgot to add- Not sure why I thought I needed to try to "install" rohan kernel later on in TWRP lol
P.S.S I tried to mount sd card in twrp, nomatter how many times i try to select it it wont work
Yeah just format it and then it'll show up as a drive for you then you can send a rom to it.
Sent from my HTC One XL using xda premium
thejosh86 said:
Yeah just format it and then it'll show up as a drive for you then you can send a rom to it.
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
I'm sorry- I really don't understand what I'm going to lose if I format, like... apparently all my data is somewhere in the air now lol, but will I not lose any important things the phone needs to run? TWRP? Will the bootloader still be unlocked?
And, if above "issues" aren't "issues", then will the following steps be correct?
1. Send ROM to phone
2. Throw fastboot.exe and adb thing into a folder with the ROM/ boot.img
3. CMD prompt to flash
4. Magic
?
Thanks so much and sorry to be a pain here if this isn't that big of an issue! I was afraid I bricked the thing, but I was holding on to hope that I didn't since it seemed like a good thing that it would still boot to TWRP.
Also- not sure if this is an issue, I tried to hit adb sideload in TWRP just messing around with options, and it said it couldn't mount the SD card.... so.... yeah, is that an issue?
Whatever data you had on the sd card is gone anyway. You need to reformat to use it.
Formatting the sd card won't affect your /system files or recovery, which are stored on a different area, or cause you to lose root.
You guys are awesome. Thanks so much!
And, as you get a lot: Sorry... for being a noob. lol
Related
I hate to post this but after 3 days of trying to get this damned phone serviceable I am seeking higher powers.
I have viewed just about every thread I can, and everytime i think I'm getting close only to be disappointed.
I was attempting to root a Rogers HTC One X for a friend. Ive rooted 3 other devices prior to this one without issue and constantly custom rom my own device (HTC Raider).
As of now, I CAN: Boot to Hboot (1.11.000), Flash Custom Recovery (Have tried TWRP and CWM, can enter successfully cant do much else), flash things via fastboot.
I CANNOT boot to OS. Its apparently gone. so as such, i have no access to the SD-ext. I CAN mount USB in TWRP but while it shows up in windows as a storage device, I CANT see it on the phone, so i cant flash it. I CANNOT mount in CWM.
I have attempted to RUU via fastboot. I have gotten errors for signature, size and model. Even the stock, non-root one (1.94) stated that the size is incorrect. Im also seeing alot of Errors regarding android-info.txt.
I really desperately need to get this running. Which ever rom. i dont care. If i can get stock, fine, if not Custom rom/kernel.
My biggest issue is not having access to the sd-ext and this phone, for some stupid reason, does not have a microSD slot, which would have made this whole issue alot easier.
I dont know if im missing a file or a step. Im really not sure where to go next.
If you have files that will work and can tell me how to do it, I will forever be in your debt.
It seems to me that i SHOULD be able to run fastboot update xxx.zip and just have it fix it but thats when im getting the android-info.txt errors.
If i could manually flash the 3 files through fastboot (system and boot more than recovery), i would think it would work but nooooooo.
Is there any way any of you know how to get me to atleast being able to see my sd-ext on both windows and TWRP so i can flash it that way? ANYTHING?
So, Got it up and running with Team Nocturnals Rom.
What I had to do was wipe SD and caches in TWRP. Flashed CWM from fastboot. Wiped SD and cache AGAIN. Flashed back to TWRP. Wiped SD and Cache. Rebooted to fastboot. Flashed the boot.IMG. Rebooted to recovery. Mounted USB. Windows detected it. Formatted to fat32. Copied the .zip to SD and installed. Problem solved.
Stock 2.20 Rom that's around didn't work, deodexed rooted stock didnts, nor did Android Revolution HD.
I still thank all of you, because even though I got this working myself, it was bits and pieces of every other thread that got me to that point. Thank you all.
Sent from my HTC Velocity 4G X710s using xda app-developers app
Kesler84 said:
So, Got it up and running with Team Nocturnals Rom.
What I had to do was wipe SD and caches in TWRP. Flashed CWM from fastboot. Wiped SD and cache AGAIN. Flashed back to TWRP. Wiped SD and Cache. Rebooted to fastboot. Flashed the boot.IMG. Rebooted to recovery. Mounted USB. Windows detected it. Formatted to fat32. Copied the .zip to SD and installed. Problem solved.
Stock 2.20 Rom that's around didn't work, deodexed rooted stock didnts, nor did Android Revolution HD.
I still thank all of you, because even though I got this working myself, it was bits and pieces of every other thread that got me to that point. Thank you all.
Sent from my HTC Velocity 4G X710s using xda app-developers app
Click to expand...
Click to collapse
Ummmm android revolution is for the international one x.... Maybe that's how u f'd it up in the first place? Idk just be careful the threads are kinda similar ...
No, I didn't even touch Revolution until it was already not working. I was originally just rooting the stock. It wasn't until it softbricked that I attempted any customs.
Sent from my HTC Velocity 4G X710s using xda app-developers app
I'll preface this by saying the following:
I know there are a lot of brick guides out there, and most are relatively easy to get out of. I've worked myself into a bit of a pickle, though.
It started when I noticed that there was an update available through the CM updater. I figured, what the hell, I'm running a nightly and this is likely to be a stable release, so I went ahead and downloaded it. I got home and checked the get.cm page, and sure enough, a new, stable build had recently been released. Being the diligent soul that I am, I made sure to do a full backup before I installed the .zip. Everything worked out just fine, the backup went swell, the update finished without problems, and then I rebooted my device.
All I see is the Asus splash screen. It just stays there. So I think, no big deal, it just didn't work out like I wanted, I'll go format my data (which I didn't do the first time around, in hopes that everything would carry over) and install again. The same thing happens. I haven't started panicking yet, since I still have 3 backups (1 older Jellybean, and one much older ICS). None of them work. I wipe everything that I can think might help. Data, system, cache, dalvik, you name it. Nothing was working, and I was starting to freak out. Then I decided to try to get some action through fastboot, hoping that I could push a .zip that wasn't the CM10 update that had started everything. In my search for a push command, I thought it would be a good idea to try a wipe from fastboot. This wiped everything. Not only the system, boot, etc. partitions, but also my personal partition that had all of my data. This in itself isn't a big problem, but it also left the partitions unformatted. Now I have a device that is devoid of data and can't do anything but get into CWM and fastboot.
What the hell can I do? Am I doomed? Is there no way to get out of the hole I've dug myself into?
tl;dr failed update, things got really real, really fast.
Specs before the initial update
ROM: CM10 nightly, Jellybean 4.1.x
CWM: 5.5.0.4
Kernel Version (?): 9.4.3.30-20120604 (I'm not sure with this, it says something about "android carhu-user" before it)
same thing just happened to me. Im going to download another version of CM and try that. It might just be that.
DerangedLoofah said:
same thing just happened to me. Im going to download another version of CM and try that. It might just be that.
Click to expand...
Click to collapse
That's the thing, though, I have no idea how I'm supposed to get it to my device now...
http://forum.xda-developers.com/showthread.php?t=1989076
Have you tried this? I was just thinking about it because I can't reflash my recovery and thought this may be the way to start over.
OK I downloaded the us jb update and extracted to my external SD card and flashed it in recovery after wipes. Everything is good now.
Edit: flash recovery in fast boot.
Sent from my SCH-I535 using Tapatalk 2
Glad you got it!
nitsuj79 said:
Glad you got it!
Click to expand...
Click to collapse
DerangedLoofah managed to get it, but I still haven't had any luck.
DerangedLoofah said:
OK I downloaded the us jb update and extracted to my external SD card and flashed it in recovery after wipes. Everything is good now.
Edit: flash recovery in fast boot.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
How did you flash it in fastboot? I can't figure out how to get to something that's on the external SD card. What were the exact commands you used?
1. Download any software from this topic http://forum.xda-developers.com/show....php?t=1697227
2. Unpack it one so you have a zip without UpdateLauncher
3. Rename the zip to EP201_768_SDUPDATE.zip
4. Put on a sdcard into the root (the sdcard should be clean, no other files)
5. Boot you tablet to RCK (Volume down + power, then volume up)
6. Let the magic begin!!! Take some minutes.
Attention! JB user pleas choose a JB ROM, don't flash ICS ROM on JB bootloader.
You tried this method with no love? I was able to flash stock pretty easily doing this.
nitsuj79 said:
1. Download any software from this topic http://forum.xda-developers.com/show....php?t=1697227
2. Unpack it one so you have a zip without UpdateLauncher
3. Rename the zip to EP201_768_SDUPDATE.zip
4. Put on a sdcard into the root (the sdcard should be clean, no other files)
5. Boot you tablet to RCK (Volume down + power, then volume up)
6. Let the magic begin!!! Take some minutes.
Attention! JB user pleas choose a JB ROM, don't flash ICS ROM on JB bootloader.
You tried this method with no love? I was able to flash stock pretty easily doing this.
Click to expand...
Click to collapse
Does that work with CWM? I don't have the stock bootloader on it.
This works only if you didn't flash custom recovery, it is the best method for locked devices. But you can still flash any stock ROM from CWM (but I suggest to use TWRP, you can install it from external sd). And you can push the ROM to internal memory via adb. I think you can install stock ROM via fastboot too, I am not sure, but the command fastboot update should help.
I managed to get it working again. If you can get to fastboot, push a bootloader that supports an external SD cards (like TWRP) and then from that install one of the official ASUS firmwares. From there, you have to root again, but it's better than having a device that won't boot at all.
Hey guys new here. I've done a fair amount of searching and cant really find anything that describes my problem. Trying to root my AT&T HOX and failed to put CM10 on the drive before unlocking. Now I have TWRP up right now but when I go to mount and then mount USB storage my PC says that this drive needs to be formatted to work correctly. Honestly not sure what I should do here I tried using HASOON2000's all in one kit but couldn't find the data folder for it. So I started following Cursed4Eva's video tutorial. I have already went to HTC Dev and unlocked it. When I'm in the bootloader menu it says "unlocked" "tampered". Basically Im kinda stuck right now as to what I can do to get CM10 on the one x's drive. Sorry for the super noob questions. Thanks in advance!
Okay so I formatted my drive. I'm able to get into TWRP and Bootloader screen, I get stuck in an infinite loop of the HTC screen with a disclaimer on it if I try to turn my phone on normally. Not sure where to go from here. Do I need to put CM10 in a specific folder and then "install" it from TWRP? Really sorry for the newb questions but I thought that I could handle this and apparently I cant.
Inside of TWRP, there should be a Mount menu button that will allow you to mount your phone to your computer. Simply drop the ROM zip anywhere in that directory, unmount the phone, and choose the Install option on TWRP. Select the ROM zip file and see what happens. If you get errors of "unable to mount drive" or the like, you may have to reflash the factory RUU and start over. Did that my first time trying to flash, it's a little sucky.
You can also do this from the fast boot bootloader menu with adp push.
Well I forgot upload boot.img can I just do that right now and "install" it? Will it just install CM10 and I should be good from there? Not sure what the adb push is. I have a folder with the documents, boot.img, adb, adbwinapi.dll, and fastboot.
Okay update I got CWM-SuperSU-v0.96.zip installed so I have root access. I also have TWRP installed. I dont think that I have a Kernal on my phone or if it is then its not working correctly. In my bootloader screen it says **tampared** and **unlocked**
I might need to reflash the factory RUU (I assume Factory ROM?) and try again I guess.
You should just be able to select the entire zip and install that through TWRP. I've been told that if your hboot version is 1.14, you might have to fastboot the boot.img separately. The ROM/Kernel set I used both took care of that for me via Aroma installer, but it's something to keep in mind.
Well Im far to newb for this so I will try to put my phone back to RUU and try again another day! After doing more research I found some people say that TWRP 2.3 doesnt work for the AT&T 2.20 and that you have to use 2.2 TWRP. Can anyone confirm this? Also learned quite a bit from this failed attempt. Please tell me if Im correct, Need to unlock the phone with HTCDev, upload the boot.img via fastboot, install TWRP, mount the "sdcard" flash the rest of the rom? Does this sound correct?
I'm on 2.2 using twrp 2.3.1.0. From what I've read, different roms tend to recommend different recovery apps/versions.
As for the ordering of the install process, I would install the recovery first thing after rooting because you'll need that to flash superuser. A lot of installers will actually use superuser during the installation, so you'll want to make sure that's squared away first.
Sent from my HTC One X using xda app-developers app
So you just load the rom after you have your phone unlocked and the recovery app (TWRP) and SuperSU installed?
I really appreciate the help! Thank you!
Sounds like you got it, hope everything goes well. Good luck!
Sent from my HTC One X using xda app-developers app
I'm relatively new to flashing htc in general. Anyhow. I have a Rogers HTC One X, was running the lastest builds. I unlocked my bootloader, awesome, I installed TWRP(Made a backup of my rom, and it's in the form of a '.win/and md5' file, I also backed this up on my PC), awesome, I flashed ViperXL, it was okay except it was always missing the phone icon. So now we wanted to try CleanRom, so we flashed it, and it wiped my entire internalSD. It will not connect to PC as so to navigate or put anything into the SD, like my backup, so that TWRP can flash it. If I go into TWRP, and use the mount option, it doesn't give me the ability to check 'mount sd' in the options, I tried mounting it anyways, and Windows would then say that it 'need to format it for use, or has a corrupted file system'.
My question is, is that though I may have softbricked, or hardbricked my phone, can I make use of those backups that I made through TWRP. I also have the stock room in .zip format that I downloaded somewhere from here aswell. Anyone any ideas how to bring this phone back? To being a phone again?lol
:silly:
rrowe1980 said:
I'm relatively new to flashing htc in general. Anyhow. I have a Rogers HTC One X, was running the lastest builds. I unlocked my bootloader, awesome, I installed TWRP(Made a backup of my rom, and it's in the form of a '.win/and md5' file, I also backed this up on my PC), awesome, I flashed ViperXL, it was okay except it was always missing the phone icon. So now we wanted to try CleanRom, so we flashed it, and it wiped my entire internalSD. It will not connect to PC as so to navigate or put anything into the SD, like my backup, so that TWRP can flash it. If I go into TWRP, and use the mount option, it doesn't give me the ability to check 'mount sd' in the options, I tried mounting it anyways, and Windows would then say that it 'need to format it for use, or has a corrupted file system'.
My question is, is that though I may have softbricked, or hardbricked my phone, can I make use of those backups that I made through TWRP. I also have the stock room in .zip format that I downloaded somewhere from here aswell. Anyone any ideas how to bring this phone back? To being a phone again?lol
:silly:
Click to expand...
Click to collapse
Mount phone in twrp... Navigate to "my computer" right click removable storage, choose format.. Fat32
Download cleanrom on computer. Once its done formatting, drag rom onto SD...
Flash that shiz in twrp.. Should be golden
Sent from my One X using Tapatalk 2
Clean Rom is not a jb sense Rom you updated to jb ota so as we mentioned before you have sense jb roms to choose from
Sent from my HTC One XL
.....
Thanks Inflated/wrecker, you guys are awesome!! I was afraid to actually format that 'unmountable' drive in fear of it erasing any dependancies, or contingincies it might have with TWRP. I was able to flash my backed-up stock rom using TWRP. Thanks guys SOLVED!! Thanks!!
:victory:
:highfive:
:good:
I'm soooo confused lol.... Glad you got it working man! :thumbup:
Sent from my One X using Tapatalk 2
I was advised that i needed to update my recovery to twrp from cwm recovery to avoid an issue i got while flashing roms (the contents of my sd card would get pushed down into a subfolder of a newly created set of folders) however when i wiped my phone, as i always used to do with CWM twrp seems to have wiped a lot more, its wiped the existing rom, and all the files on my card, so i cant install a new rom. Basically i only have access to twrp recovery mode, how can i get the rom .zips onto my phone to install them? Id really appreciate any help at all, i had no issues flashing with CWM and i re
tomacotuna said:
I was advised that i needed to update my recovery to twrp from cwm recovery to avoid an issue i got while flashing roms (the contents of my sd card would get pushed down into a subfolder of a newly created set of folders) however when i wiped my phone, as i always used to do with CWM twrp seems to have wiped a lot more, its wiped the existing rom, and all the files on my card, so i cant install a new rom. Basically i only have access to twrp recovery mode, how can i get the rom .zips onto my phone to install them? Id really appreciate any help at all, i had no issues flashing with CWM and i re
Click to expand...
Click to collapse
You can mount your storage as mass storage with twrp.
Your PC will find your phone like a normal mass storage device.
which model
tomacotuna said:
I was advised that i needed to update my recovery to twrp from cwm recovery to avoid an issue i got while flashing roms (the contents of my sd card would get pushed down into a subfolder of a newly created set of folders) however when i wiped my phone, as i always used to do with CWM twrp seems to have wiped a lot more, its wiped the existing rom, and all the files on my card, so i cant install a new rom. Basically i only have access to twrp recovery mode, how can i get the rom .zips onto my phone to install them? Id really appreciate any help at all, i had no issues flashing with CWM and i re
Click to expand...
Click to collapse
i think its proper dead use jtag
NQNH said:
You can mount your storage as mass storage with twrp.
Your PC will find your phone like a normal mass storage device.
Click to expand...
Click to collapse
i lock my bootload to try ruu and know i can reaunlock it ??
naveed_hind said:
i think its proper dead use jtag
Click to expand...
Click to collapse
what is that?
can you plz tell me a stable rom
It wouldn't be a full brick he can get into bootloader and recovery... Just get any rom mount storage put the rom on sd Card and flash it... If needed flash boot. Img as well.
k1llacanon said:
It wouldn't be a full brick he can get into bootloader and recovery... Just get any rom mount storage put the rom on sd Card and flash it... If needed flash boot. Img as well.
Click to expand...
Click to collapse
that is what i do and now i turn it on and it freez on the htc bot anymation with white backround and red text :-s some ideas??
Fast boot boot.img and make sure to wipe dalvik cache.
tomacotuna said:
that is what i do and now i turn it on and it freez on the htc bot anymation with white backround and red text :-s some ideas??
Click to expand...
Click to collapse
As posted above you probably flashed a rom that requires a boot. Img flash the boot. Img in bootloader.
k1llacanon said:
As posted above you probably flashed a rom that requires a boot. Img flash the boot. Img in bootloader.
Click to expand...
Click to collapse
Ya i flask the trickdroid or something like this and i flash allsou the boot and it boot up and freez on the htc logo acreen any ideas now i am on stock version but i want a custom rom plz help
Sent from my HTC One S using xda premium
If you don't know how to use a phone when it's rooted your better off on stock dude
k1llacanon said:
If you don't know how to use a phone when it's rooted your better off on stock dude
Click to expand...
Click to collapse
I now how to use it but on my galaxy nexus is more simple ok?? And if i dont know every thing i learn
Sent from my HTC One S using xda premium