I'll preface this by saying the following:
I know there are a lot of brick guides out there, and most are relatively easy to get out of. I've worked myself into a bit of a pickle, though.
It started when I noticed that there was an update available through the CM updater. I figured, what the hell, I'm running a nightly and this is likely to be a stable release, so I went ahead and downloaded it. I got home and checked the get.cm page, and sure enough, a new, stable build had recently been released. Being the diligent soul that I am, I made sure to do a full backup before I installed the .zip. Everything worked out just fine, the backup went swell, the update finished without problems, and then I rebooted my device.
All I see is the Asus splash screen. It just stays there. So I think, no big deal, it just didn't work out like I wanted, I'll go format my data (which I didn't do the first time around, in hopes that everything would carry over) and install again. The same thing happens. I haven't started panicking yet, since I still have 3 backups (1 older Jellybean, and one much older ICS). None of them work. I wipe everything that I can think might help. Data, system, cache, dalvik, you name it. Nothing was working, and I was starting to freak out. Then I decided to try to get some action through fastboot, hoping that I could push a .zip that wasn't the CM10 update that had started everything. In my search for a push command, I thought it would be a good idea to try a wipe from fastboot. This wiped everything. Not only the system, boot, etc. partitions, but also my personal partition that had all of my data. This in itself isn't a big problem, but it also left the partitions unformatted. Now I have a device that is devoid of data and can't do anything but get into CWM and fastboot.
What the hell can I do? Am I doomed? Is there no way to get out of the hole I've dug myself into?
tl;dr failed update, things got really real, really fast.
Specs before the initial update
ROM: CM10 nightly, Jellybean 4.1.x
CWM: 5.5.0.4
Kernel Version (?): 9.4.3.30-20120604 (I'm not sure with this, it says something about "android carhu-user" before it)
same thing just happened to me. Im going to download another version of CM and try that. It might just be that.
DerangedLoofah said:
same thing just happened to me. Im going to download another version of CM and try that. It might just be that.
Click to expand...
Click to collapse
That's the thing, though, I have no idea how I'm supposed to get it to my device now...
http://forum.xda-developers.com/showthread.php?t=1989076
Have you tried this? I was just thinking about it because I can't reflash my recovery and thought this may be the way to start over.
OK I downloaded the us jb update and extracted to my external SD card and flashed it in recovery after wipes. Everything is good now.
Edit: flash recovery in fast boot.
Sent from my SCH-I535 using Tapatalk 2
Glad you got it!
nitsuj79 said:
Glad you got it!
Click to expand...
Click to collapse
DerangedLoofah managed to get it, but I still haven't had any luck.
DerangedLoofah said:
OK I downloaded the us jb update and extracted to my external SD card and flashed it in recovery after wipes. Everything is good now.
Edit: flash recovery in fast boot.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
How did you flash it in fastboot? I can't figure out how to get to something that's on the external SD card. What were the exact commands you used?
1. Download any software from this topic http://forum.xda-developers.com/show....php?t=1697227
2. Unpack it one so you have a zip without UpdateLauncher
3. Rename the zip to EP201_768_SDUPDATE.zip
4. Put on a sdcard into the root (the sdcard should be clean, no other files)
5. Boot you tablet to RCK (Volume down + power, then volume up)
6. Let the magic begin!!! Take some minutes.
Attention! JB user pleas choose a JB ROM, don't flash ICS ROM on JB bootloader.
You tried this method with no love? I was able to flash stock pretty easily doing this.
nitsuj79 said:
1. Download any software from this topic http://forum.xda-developers.com/show....php?t=1697227
2. Unpack it one so you have a zip without UpdateLauncher
3. Rename the zip to EP201_768_SDUPDATE.zip
4. Put on a sdcard into the root (the sdcard should be clean, no other files)
5. Boot you tablet to RCK (Volume down + power, then volume up)
6. Let the magic begin!!! Take some minutes.
Attention! JB user pleas choose a JB ROM, don't flash ICS ROM on JB bootloader.
You tried this method with no love? I was able to flash stock pretty easily doing this.
Click to expand...
Click to collapse
Does that work with CWM? I don't have the stock bootloader on it.
This works only if you didn't flash custom recovery, it is the best method for locked devices. But you can still flash any stock ROM from CWM (but I suggest to use TWRP, you can install it from external sd). And you can push the ROM to internal memory via adb. I think you can install stock ROM via fastboot too, I am not sure, but the command fastboot update should help.
I managed to get it working again. If you can get to fastboot, push a bootloader that supports an external SD cards (like TWRP) and then from that install one of the official ASUS firmwares. From there, you have to root again, but it's better than having a device that won't boot at all.
Related
Ok so my nephew got a hold of my phone and i'm not quite sure what he did. I had my nexus rooted and I guess he tried to install the new OTA, it didn't work so he wiped the memory card and cache etc..
now the phone doesn't go past the bootloader. Is that what it's called? the androids on it and the options are Reboot bootloader, reboot, recovery, and power off.
when I plug the phone in it doesn't get detected. Am i completely screwed here? Please let me know. I tried searching but I realized i'm not quite sure what to even search for. Any and all help is greatley appreciated!!
it doesn't sound like you are screwed but you may have lost all your data not found in the /sdcard. a few questions; did you have a custom recovery installed? and can you get to recovery?
If you can't even get into recovery then you will have to use fastboot to flash your phone. it's not hard just search for the specifics.
Thank you! yeah I have clockwork mod v 3.0.0.5 i was playing around with that and there is a recovery option.
i was also reading about a nandroid backup (lol not too sure what it is). but it looks like i have to go into recovery and load that file. if i click on mount store or whatever it recognizes on my pc. im currently trying that and keeping my fingers crossed. if not ill have to look into reflashing the phone. hope i fix this. thanks a lot though at least i have another option hah!
Look at the top of your phone. It should say something in red text.
Usually this means you've lost the Boot.img or System.img so the phone can't boot. Pushing a custom recovery like Clockwork then flashing a ROM/restoring NAND backup will fix it.
1. Download http://forum.xda-developers.com/showthread.php?t=884093
2. Mount it on your computer, enable USB storage in Clockwork Recovery
3. Paste it in there.
4. Unmount
5. Nandroid restore from that file
--- OR ---
1. Download a custom ROM (i recommend cyanogenmod because its awesome.. just my opinion -- flash gapps after CM7).
2. flash the ROM
3. there you go
but if you want OTAs and stuff like that.. use nandroid backup
FIXED!!! thanks dude. i pretty much had this last part figured out but was a bit hesitant to try it. instructions helped a huge deal.
thanks guys. really appreciate the help. saved me a heart attack haha
zephiK said:
1. Download http://forum.xda-developers.com/showthread.php?t=884093
2. Mount it on your computer, enable USB storage in Clockwork Recovery
3. Paste it in there.
4. Unmount
5. Nandroid restore from that file
--- OR ---
1. Download a custom ROM (i recommend cyanogenmod because its awesome.. just my opinion -- flash gapps after CM7).
2. flash the ROM
3. there you go
but if you want OTAs and stuff like that.. use nandroid backup
Click to expand...
Click to collapse
Glad it's fixed but here's my question.
Your nephew got a hold of your phone.... he takes it and starts WIPING STUFF OFF OF IT?!?!?!?!? WTF!
Currently I am in a soft brick state- I cant remember which CM- 9 either cm-9-20120614-EXPERIMENTAL-skyrocket-alpha5.zip, or cm-9-20120709-NIGHTLY... (I can see that those are the only two I have on my sd card. I am on an ATT GS2 skyrocket
If I boot normally - it stays stuck on the CM9boot screen.
I can use the 3 finger method to boot into CWM 5.8.4.3
While searching for answers I read that this CWM is broken.
Initially I was trying to go back to an earlier recovery. CWM would see the recoveries on the SDcard, but when I tried to recover- it would not mount from the SD card.
I got to CM( by using odin to put an earlier CWM, and superuser on the phone, then installed Rom manager, then used rom manager to flash CWM (via tmobile sgs2) then updated to CWM touch...
When I tried using the CWM to factory restore and cache wipe it starts then hangs I cant install zips from the external SD card, or any recoveries...
I'm figuring worst case - I can go back to ODIN, and do stock recovery http://forum.xda-developers.com/showthread.php?t=1342348 , then flash the non touch CWM, superuser http://forum.xda-developers.com/showthread.php?t=1340526, then flash a recovery from my sd card??
Is there something else I might have missed in trying to get back to a functional state without going to odin?
Many thanks in advance for any assistance
Ihab
ihabelnaccash said:
Currently I am in a soft brick state- I cant remember which CM- 9 either cm-9-20120614-EXPERIMENTAL-skyrocket-alpha5.zip, or cm-9-20120709-NIGHTLY... (I can see that those are the only two I have on my sd card. I am on an ATT GS2 skyrocket
If I boot normally - it stays stuck on the CM9boot screen.
I can use the 3 finger method to boot into CWM 5.8.4.3
While searching for answers I read that this CWM is broken.
Initially I was trying to go back to an earlier recovery. CWM would see the recoveries on the SDcard, but when I tried to recover- it would not mount from the SD card.
I got to CM( by using odin to put an earlier CWM, and superuser on the phone, then installed Rom manager, then used rom manager to flash CWM (via tmobile sgs2) then updated to CWM touch...
When I tried using the CWM to factory restore and cache wipe it starts then hangs I cant install zips from the external SD card, or any recoveries...
I'm figuring worst case - I can go back to ODIN, and do stock recovery http://forum.xda-developers.com/showthread.php?t=1342348 , then flash the non touch CWM, superuser http://forum.xda-developers.com/showthread.php?t=1340526, then flash a recovery from my sd card??
Is there something else I might have missed in trying to get back to a functional state without going to odin?
Many thanks in advance for any assistance
Ihab
Click to expand...
Click to collapse
Hi there,
I recently experienced the same thing, and it was a hassle to fix--but I have got my phone working each time. The downside being that I /had/ to switch over to Odin. Mind you, I am not necessarily experienced with Android, so I can't really say that this is the only way.
At any rate, here's what I did to get it back to normal:
Load up Odin
Put it in download mode -- I assume you know to hold the volume keys and then plug in the USB.
Flash either the ICS leak or the stock 2.3.5 Gingerbread.
You should be back to good. I hope you backed everything up in either Kies or some other resource...else you're in for a hell of a time setting stuff up.
Oh: bad news about the 2.3.5 stock is that, as far as I can tell, you're unable to upgrade to 2.3.6. In turn, you're then unable to update to the official ICS through Kies or OTA. I assume you don't mind, considering you're trying to flash a new rom anyway.
Anyway, I do hope there is some bit of clarity on getting CM9 on the Skyrocket. As of now I have still been unable to do it. Just as you, no matter the settings I try, I end up being stuck at that screen. The only difference between your method and mine is that I completely did mine through CWM...nothing through ROM Manager. (Actually, I believe I tried a few differing methods involving the CWM touch and non-touch...followed many different guides but still no good.)
Hope you get it back to a functioning state. If you get CM9 working on the Skyrocket, I'd appreciate you sending a bit of details on how to do so.
EDIT: I am now on CM9. Through magic, ponies and friendship I have failed to accomplish this feat. But by pure science and the blood of a pony, I have successfully installed CM9.
After you've restored to 2.3.5 or the ICS leak (the one I was on), do the following:
- Grab the recovery-clockwork-touch U27 described below. Flash it.
- Download both the newest CM9 build from their website, as well as Google Apps, and then copy those to your external SD.
- Follow this guide: http://www.teamchopsticks.org/p/install-guide.html. Here's what's relevant to you:
Wipe data/factory reset.
Format /system (mounts and storage->format /system).
Install the CM9 zip from SD card.
Install the gapps zip from SD card.
ONLY IF YOU ARE ON TOUCH CWM RECOVERY: Format /cache (mounts and storage->format /cache)
Reboot. Let it sit for a few minutes after the first boot. Be patient.\
Click to expand...
Click to collapse
After ~10 minutes you should be fine. Mine took less, but I'd bet it could take longer. Please follow those directions above EXACTLY. I'll be happy to help you in any way I can if you reply to this thread/ send me a PM.
When I softbricked with the latest CWM I wasn't able to return back since it wouldnt detect my SDcard so I just loaded up odin and used recovery-clockwork-touch-5.8.1.3-hercules.tar and was able to read my SDcard again which had all my backups and CM9 files. I have flashed every version of CM9 every since and still using this CWM version and havent had any problems. :good:
All better now- I used ODIN to restore to stock, then used it again to put CWM (non-touch) back on, then added superuser, then just did a restore from SDcard! Muchas Gracias all!
Should I be able to then use a restore of when I had a working CM9 (and backed up with CWM)? Or would I have to do all the cache wiping/ factory reset like I did to install it the first time before using such a recovery? (and I will try that recovery- clockwork touch hercules... latrer tonight from home)
ODIN tar to restore back to factory. I got the boot loop too. Only until after I flashed CM9 then flashed dark side wipe cache only would CM9 work for me. Only on regular CWM though. Try and give that a go.
Sent from my SAMSUNG-SGH-I727
Hello there, I have a htc one xl on At&t rooted... it has the hboot 1.14. Everything was fine until yesterday when I tried to flash AOKP. I used flash image gui to flash the boot.img then rebooted to TWRP and wiped rom, wiped everything, then installed the .zip for the boot.img I flashed... It would say android is upgrading and cycled through all the apps but stopped at starting apps... wouldnt go past it for 6 hours. I rebooted and tried to reflash the boot.img, but computer didnt recognize phone, and TWRP showed there was nothing on the sdcard
Juts mount your sd in recovery and drag a Rom over from your computer
J3susisl0rd7 said:
Hello there, I have a htc one xl on At&t rooted... it has the hboot 1.14. Everything was fine until yesterday when I tried to flash AOKP. I used flash image gui to flash the boot.img then rebooted to TWRP and wiped rom, wiped everything, then installed the .zip for the boot.img I flashed... It would say android is upgrading and cycled through all the apps but stopped at starting apps... wouldnt go past it for 6 hours. I rebooted and tried to reflash the boot.img, but computer didnt recognize phone, and TWRP showed there was nothing on the sdcard
Click to expand...
Click to collapse
Sounds like the initial problem was just a bad flash/download. It happens.
Try unplugging your phone, shutting down and restarting into bootloader, then hooking it up.
You flashed an incompatible kernel it sounds like.
Make sure you try flashing the kernel within the ROM
Sent from my One X using Tapatalk 2
Hello everyone! Thanks for the replies. Sorry for the rushed post earlier, was on the way out the door after trying for a while to figure something out. I'd love to send a rom to it, but TWRP shows that I have 0 mb available of storage, and the computer says I must format it to access files or something. I may have forgotten to mention- I think i flashed rohan kernel b6 improperly... used flash image gui then went to recovery and clicked it and hit install ... it hung at installing for a while, and upon reboot the starting apps problem happened, followed by no rom being on there, only being able to access TWRP, and ... well, above things. If I formatted it would I be able to put twrp and everything back on it necessary to make the thing function properly? Orr.... Thanks for any help!
God bless!
P.S. Forgot to add- Not sure why I thought I needed to try to "install" rohan kernel later on in TWRP lol
P.S.S I tried to mount sd card in twrp, nomatter how many times i try to select it it wont work
Yeah just format it and then it'll show up as a drive for you then you can send a rom to it.
Sent from my HTC One XL using xda premium
thejosh86 said:
Yeah just format it and then it'll show up as a drive for you then you can send a rom to it.
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
I'm sorry- I really don't understand what I'm going to lose if I format, like... apparently all my data is somewhere in the air now lol, but will I not lose any important things the phone needs to run? TWRP? Will the bootloader still be unlocked?
And, if above "issues" aren't "issues", then will the following steps be correct?
1. Send ROM to phone
2. Throw fastboot.exe and adb thing into a folder with the ROM/ boot.img
3. CMD prompt to flash
4. Magic
?
Thanks so much and sorry to be a pain here if this isn't that big of an issue! I was afraid I bricked the thing, but I was holding on to hope that I didn't since it seemed like a good thing that it would still boot to TWRP.
Also- not sure if this is an issue, I tried to hit adb sideload in TWRP just messing around with options, and it said it couldn't mount the SD card.... so.... yeah, is that an issue?
Whatever data you had on the sd card is gone anyway. You need to reformat to use it.
Formatting the sd card won't affect your /system files or recovery, which are stored on a different area, or cause you to lose root.
You guys are awesome. Thanks so much!
And, as you get a lot: Sorry... for being a noob. lol
So finally took the plunge and flashed Cromi-X 5,2,2. Current set up is bootloader 10.8, TWRP 2.5.0 unlocked and rooted. I was running fine for a couple of days and decided to try cromi control to turn of a couple of notifications.I didnt reboot from cromi control as I read there was a bug. I powered off using the power button and when powering back on I was stuck on boot animation. Options I chose on the original flash was _thatv4 10.8 with defaults. No ET / OV / OC / No tweaks. So i decided to dirty flash 5.2.2 again without formating data I got to upgrading apps and when it rebooted, back stuck on animation. I am going to try flashing my original stock asus nandroid.prior to 5.2.2 just to get it working for the evening.
Doing a search of the thread now... See this has been covered on 5.2.1. I may have to wipe / format data IDK
Any suggestions?
Thanks
Update
Restored my nandroid and back up and running.. Guess I have some reading to do.
Would updating to 8.10 and latest TWRP help any? Maybe try that and use _thatv7 next go around.
GPWILL said:
Restored my nandroid and back up and running.. Guess I have some reading to do.
Would updating to 8.10 and latest TWRP help any? Maybe try that and use _thatv7 next go around.
Click to expand...
Click to collapse
It is always good to have the latest bootloader and TWRP. What is your firmware or bootloader now? What do you want to achieve or usage on your device? _that v7 on Cromi X is a nice combo with speed and stability...
GPWILL said:
Restored my nandroid and back up and running.. Guess I have some reading to do.
Would updating to 8.10 and latest TWRP help any? Maybe try that and use _thatv7 next go around.
Click to expand...
Click to collapse
Glad you got it working again. It's strange - what happened is typical for rebooting from the Cromi app, but you didn't.....
Did you do a factory wipe in TWRP before installing CROMi-X?
Also, it certainly wouldn't hurt to update your recovery. Just flash the bootloader/TWRP package in the CROMi-X OP and reboot to system.
My current working is 10.6.1.14.8 from ASUS and TWRP 2.5.0. I did a factory wipe in TWRP before flashing Cromi 5.2.2. Everything went smooth. I let google restore my apps when running thru the setup wizard. A little painful but only took 30 minor so. I didnt restore any apps or data from my TB. So I let it run for a couple of days with no issues. I ran into trouble with the chromi control. Wanted to get rid of that annoying external card notification. Powered off using the power button and boom. Things went south. I am not a overclock / tweak poweruser. Just wanted a little tweak since it looks like ASUS is not going to update anymore. My tab is a little over a year old and my only complaints have been browser lag and the painful lag of using the tablet when apps updates. My intent is to get 5.2.2. Run thru set up / installer a couple of times so I could get use the installer and then at some point venture into rom2sd or data2sd. Next go around I will get 5.2.2 working and nandroid that. I had tried B2R and it works ok. But with 5.2.2 it seems to give the tab a big 'push'. The browser worked way faster. I tried both stock and Chrome with 5.2.2 and was nice and smooth..
Thanks for the responses. If you think of anything else I appreciate it. Been on this forum for awhile and you guys are great!
GPWILL said:
My current working is 10.6.1.14.8 from ASUS and TWRP 2.5.0. I did a factory wipe in TWRP before flashing Cromi 5.2.2. Everything went smooth. I let google restore my apps when running thru the setup wizard. A little painful but only took 30 minor so. I didnt restore any apps or data from my TB. So I let it run for a couple of days with no issues. I ran into trouble with the chromi control. Wanted to get rid of that annoying external card notification. Powered off using the power button and boom. Things went south. I am not a overclock / tweak poweruser. Just wanted a little tweak since it looks like ASUS is not going to update anymore. My tab is a little over a year old and my only complaints have been browser lag and the painful lag of using the tablet when apps updates. My intent is to get 5.2.2. Run thru set up / installer a couple of times so I could get use the installer and then at some point venture into rom2sd or data2sd. Next go around I will get 5.2.2 working and nandroid that. I had tried B2R and it works ok. But with 5.2.2 it seems to give the tab a big 'push'. The browser worked way faster. I tried both stock and Chrome with 5.2.2 and was nice and smooth..
Thanks for the responses. If you think of anything else I appreciate it. Been on this forum for awhile and you guys are great!
Click to expand...
Click to collapse
With your current firmware, 10.6.1.14.8, you should have the latest bootloader but you still need to update your TWRP to a later version, 2.6.1.0 or 2.6.3.0.. You need to pick one. I am still using 2.6.1.0 and it works fine at the moment and no plan to update to 2.6.3.0. I am very sure that you know how to update your custom recovery, TWRP,
If I am not mistaken, you have the old backup but not the 5.2.2 backup before it crashed... It is always a good idea to backup your good working current setup so you can go back or restore if something is going wrong.. One more thing about backup, it would be nice if you can keep your backup and personal stuff on your External SD, Not the internal SD...
Rom and kernel selections: Cromi v5.2.2 is the latest and the fastest in my opinion so it is your first choice unless you something else in mind.. You only have a few selections on kernel and they are all good and serve with a different purposes. sbdags is very closed to stock with a minimal modifications. _that v7 is the latest and more modifications comparing to sbdags. However, it is faster and more stable or most stable of all according to testers and users... Hund's kernel is the fastest of all with even more modifications and options for users to change settings. Testers and users report back with a little less stable comparing to _that but I don't have a single problem with this kernel... However, it is running a little warmer than sbdags and _that because it is running with higher frequency...Max kernel is another option but it seems like there is no supports at the moment. No one knows where he is, haha... Hopefully, we can hear back from him again...
Installation: Totally clean installing because you are already having issue...
1. Backup anything that you want to save including your personal data and files
2. Copy cromi and kernel that you want to install to your External SD because you want to format your data partition
3. Format your data partition and I mean Format, not wipe.
4. Wipe everything on your device including your system but not your external SD..
5. Install cromi and kernel of your choices
6. Reboot and let it sits for a few minutes, then you can do your setup from the setup wizard
7. Go back to your TWRP and do a nandroid backup to your External SD, just in case so you restore it
8. Install your apps or whatever you want from the google store, not from your TB so you can have a good and stable backup
9. After you are done with all the apps and games installation, you may want to do another backup in the TWRP
10. Now you can do whatever you want from this point and if you have more settings to do, you may want to do another backup as a Final backup and a good working one... You can delete the other backup from the previous if you have the final and working backup. You just need one good working backup..That is it..
You can always go back to TWRP to restore just your data or just a system or a whole backup. Those are the options that you can restore and good luck...:fingers-crossed:
LetMeKnow said:
With your current firmware, 10.6.1.14.8, you should have the latest bootloader but you still need to update your TWRP to a later version, 2.6.1.0 or 2.6.3.0.. You need to pick one. I am still using 2.6.1.0 and it works fine at the moment and no plan to update to 2.6.3.0. I am very sure that you know how to update your custom recovery, TWRP,
If I am not mistaken, you have the old backup but not the 5.2.2 backup before it crashed... It is always a good idea to backup your good working current setup so you can go back or restore if something is going wrong.. One more thing about backup, it would be nice if you can keep your backup and personal stuff on your External SD, Not the internal SD...
Rom and kernel selections: Cromi v5.2.2 is the latest and the fastest in my opinion so it is your first choice unless you something else in mind.. You only have a few selections on kernel and they are all good and serve with a different purposes. sbdags is very closed to stock with a minimal modifications. _that v7 is the latest and more modifications comparing to sbdags. However, it is faster and more stable or most stable of all according to testers and users... Hund's kernel is the fastest of all with even more modifications and options for users to change settings. Testers and users report back with a little less stable comparing to _that but I don't have a single problem with this kernel... However, it is running a little warmer than sbdags and _that because it is running with higher frequency...Max kernel is another option but it seems like there is no supports at the moment. No one knows where he is, haha... Hopefully, we can hear back from him again...
Installation: Totally clean installing because you are already having issue...
1. Backup anything that you want to save including your personal data and files
2. Copy cromi and kernel that you want to install to your External SD because you want to format your data partition
3. Format your data partition and I mean Format, not wipe.
4. Wipe everything on your device including your system but not your external SD..
5. Install cromi and kernel of your choices
6. Reboot and let it sits for a few minutes, then you can do your setup from the setup wizard
7. Go back to your TWRP and do a nandroid backup to your External SD, just in case so you restore it
8. Install your apps or whatever you want from the google store, not from your TB so you can have a good and stable backup
9. After you are done with all the apps and games installation, you may want to do another backup in the TWRP
10. Now you can do whatever you want from this point and if you have more settings to do, you may want to do another backup as a Final backup and a good working one... You can delete the other backup from the previous if you have the final and working backup. You just need one good working backup..That is it..
You can always go back to TWRP to restore just your data or just a system or a whole backup. Those are the options that you can restore and good luck...:fingers-crossed:
Click to expand...
Click to collapse
Been awhile since I played with fastboot. Can I just flash the bootloader and twrp zip from the 5.2.2 Cromi thread and be ok? I know to flash this first and reboot into rom before flashing 5.2.2 again. Otherwise I will get fastboot going again.
"10.6.1.14.10 US Bootloader and TWRP 2.6.1.0 DOWNLOAD 1" This is in scenario 2 which doesnt really apply because I dont have a custom rom installed yet at this point.
I am saving these notes for future reference. Thanks for the time in writing these up.
GPWILL said:
Been awhile since I played with fastboot. Can I just flash the bootloader and twrp zip from the 5.2.2 Cromi thread and be ok? I know to flash this first and reboot into rom before flashing 5.2.2 again. Otherwise I will get fastboot going again.
"10.6.1.14.10 US Bootloader and TWRP 2.6.1.0 DOWNLOAD 1" This is in scenario 2 which doesnt really apply because I dont have a custom rom installed yet at this point.
I am saving these notes for future reference. Thanks for the time in writing these up.
Click to expand...
Click to collapse
I think that it would fine since you are running TWRP 2.5. Please be careful when you install custom recovery and bootloader. If you make a mistake, it could brick your device, just my two cents.. Please ask a lot of questions to be sure...
Note: From your TWRP 2.5, install 10.6.1.14.10 first and reboot so the blob can update your bootloader. When it boots into the system, then you need to reboot it back into your TWRP 2.5 and install the TWRP 2.6.1.0. When it is done, then you need to shut it down and use your power button and volume down to boot back into your new TWRP...Good luck..:fingers-crossed:
Always check your download "MD5 Sum" to verify that you have a good download....
You have my attention now and I will take your offer to ask questions. So if I understand correctly the bootloader and twrp zip from above will allow to flash them individually? In twrp point to the zip and it gives you options to flash the bootloader without twrp? I would do this:
1. boot into twrp and choose install.
2. choose zip from above
3. choose bootloader only?
4. reboot into rom. let it sit for a few.
5 reboot into twrp
6 choose new twrp?
7 reboot into rom.
Just trying to be clear so no brick...
I would upgrade in goomanager. Thats how I got twrp to begin with. But I have read it doesnt work anymore?
GPWILL said:
You have my attention now and I will take your offer to ask questions. So if I understand correctly the bootloader and twrp zip from above will allow to flash them individually? In twrp point to the zip and it gives you options to flash the bootloader without twrp? I would do this:
1. boot into twrp and choose install.
2. choose zip from above
3. choose bootloader only?
4. reboot into rom. let it sit for a few.
5 reboot into twrp
6 choose new twrp?
7 reboot into rom.
Just trying to be clear so no brick...
I would upgrade in goomanager. Thats how I got twrp to begin with. But I have read it doesnt work anymore?
Click to expand...
Click to collapse
I never use the method from cromi thread but I trust sbdags as a great developer and so many users used this method without a problem...
If you are still running stock firmware version 10.6.1.14.8, then you still can use goomanager to update your TWRP... If you prefer it that way, then goo still works for you...If you are on stock version 10.6.1.14.8, you are already on the latest bootloader unless you want the latest stock firmware V14.10 which you will update it with Cromi any way...
1. Use goo to update the correct TWRP, 2.6.3.0 or 2.6.1.0
2. Boot into your new TWRP and install the Cromi and follow the instructions that I wrote earlier
Good luck..:fingers-crossed:
GPWILL said:
You have my attention now and I will take your offer to ask questions. So if I understand correctly the bootloader and twrp zip from above will allow to flash them individually? In twrp point to the zip and it gives you options to flash the bootloader without twrp? I would do this:
1. boot into twrp and choose install.
2. choose zip from above
3. choose bootloader only?
4. reboot into rom. let it sit for a few.
5 reboot into twrp
6 choose new twrp?
7 reboot into rom.
Just trying to be clear so no brick...
I would upgrade in goomanager. Thats how I got twrp to begin with. But I have read it doesnt work anymore?
Click to expand...
Click to collapse
Not quite.
You cannot flash BL or TWRP separately from that package. It's either both or none.
But flashing the package would be the easiest and safest method to get you on a current recovery in my opinion.
GooManager: For a few weeks now Goo did not support flashing recoveries anymore. I've read it often enough that I consider that information confirmed - although I have not tested it myself.
Now - just yesterday I read a post where a user reported that Goo got an update and he flashed TWRP successfully. That's one report I know of - if you want to give it a try, go for it. It can't hurt.
The thing is, to use GooManager you have to root the stock rom you are running.
I don't know if the stock rom you are running is rooted, but why bother if you can just flash sbdags package??
Sounds like choosing _thatv7 from the 5.2.2 also upgrades the bootloader also to 10? I assumed you needed the correct bootloader already installed.
I will give goo a go and see what happens.
GPWILL said:
Sounds like choosing _thatv7 from the 5.2.2 also upgrades the bootloader also to 10? I assumed you needed the correct bootloader already installed.
I will give goo a go and see what happens.
Click to expand...
Click to collapse
Well goomanager didnt work for me. Just sits on "downloading" forever. only option was to upgrade to 2.6.3.1
Off to get fastboot working..
GPWILL said:
Sounds like choosing _thatv7 from the 5.2.2 also upgrades the bootloader also to 10? I assumed you needed the correct bootloader already installed.
I will give goo a go and see what happens.
Click to expand...
Click to collapse
_thatv7 is one of the kernel choices - changing a kernel does not do anything to the bootloader.
Look at these elements of the system as parts of an engine: If the bootloader is the starter motor, the kernel may be the distributor.....
Thanks for trying Goo, the score is 1:1
Anyway, to get fastboot working is worth the effort. It's great for troubleshooting or pulling logs and such. It's very helpful to have a working fastboot connection BEFORE you run into some trouble and really need it to work
I guess my question is if I choose _thatv7 will bootloader .8 work? The 10 after the kernel choice is what has put me down this road.
fastboot and adb working. So getting there albeit slowly.
This thread really helped a lot in my learning process..
http://forum.xda-developers.com/showthread.php?t=2546420&highlight=flash+10+6+1+14+10+fastboot
Thanks again for all the info and help.
GPWILL said:
I guess my question is if I choose _thatv7 will bootloader .8 work? The 10 after the kernel choice is what has put me down this road.
fastboot and adb working. So getting there albeit slowly.
This thread really helped a lot in my learning process..
http://forum.xda-developers.com/showthread.php?t=2546420&highlight=flash+10+6+1+14+10+fastboot
Thanks again for all the info and help.
Click to expand...
Click to collapse
There's hardly anything different between the. 8 and . 10 bootloader. V7 works fine with either.
Sent from my DROID4 using Tapatalk
berndblb said:
There's hardly anything different between the. 8 and . 10 bootloader. V7 works fine with either.
Sent from my DROID4 using Tapatalk
Click to expand...
Click to collapse
Update:
Updated TWRP to 2.6.1
fastboot and adb working
Flashed 5.2.2 Cromi-X _thatv7 this time around. (used the advice from above)
Set up apps
I will def nandroid this working config..
All good now.
Thanks to everyone!
FYI I updated goomanager and tried it again on my old setup and it still did not work updating twrp. Stuck on downloading app...
GPWILL said:
Update:
Updated TWRP to 2.6.1
fastboot and adb working
Flashed 5.2.2 Cromi-X _thatv7 this time around. (used the advice from above)
Set up apps
I will def nandroid this working config..
All good now.
Thanks to everyone!
FYI I updated goomanager and tried it again on my old setup and it still did not work updating twrp. Stuck on downloading app...
Click to expand...
Click to collapse
Fastboot is a prefer method to use...:good: I always use fastboot for this stuff. It is fast and easy without any hassle...
How is it running? It should be running very reasonable speed and smoothness...
LetMeKnow said:
Fastboot is a prefer method to use...:good: I always use fastboot for this stuff. It is fast and easy without any hassle...
How is it running? It should be running very reasonable speed and smoothness...
Click to expand...
Click to collapse
It is running pretty nice. Stock browser and Chrome are a little faster than my stock setup with B2R. I have had a few " laucher has stopped" errors. This happened before I installed any apps with thatV7. Didnt get a single laucher error before on thatv4. Stock laucher. Nice and smooth on apps and such. Both stock browser and chrome are faster but not anything like "WOW". Just a little better. Nice to have it built in. I am going to give this a few more days and see if the laucher errors settle down. If it stablizes I will get another nandroid of it and try the ROM2SD to see if I can get the wow factor going.
My old phone got lost so I am using my Infuse again. I decided to update it since it is still on the old version from when it first came out. I was trying forever to update through the kies software until I realized I rooted it and so this won't work. So then I found out there are roms for way better versions anyways. So I found the Cyanfox rom and I wanted to do that, but I needed to first upgrade to cm9 so I went and downloaded the cm9 file and got the clockworkrecovery, and I installed it.
Now my phone will not turn on, it sits as samsung screen. And if you try to go to recovery it is just a messed up screen with all different colors as if the screen was broken. So now my only option to bea ble to install anything on it is through odin. I can get to download mode fine.
But this damn odin software will not detect my phone for the life of me. It literally will not work. I don't understand. I have spent hours upon hours on this between the past few days. I just want to update my damn phone.
Now I have to leave for work in 30 minutes and my phone doesn't work. This is just great.
How did you install CWM?
Sent from my Asus MeMO Pad 8"
Well I tried clockworkmod through the rom manager app, but I was running the android recovery 3e and it said I needed a modified version of that to be able to install 3e. So I replaced the recovery file with the one I was given, and then I manually installed cwm by naming it update.zip and running it on the recovery
The only problem was that every time I wanted to use cwm, it would go back to android recovery 3e, and I would have to click install again to get it to go into cwm.
Either way, it doesn't work anymore and I just need the damn thing to connect to Odin so I can flash it back.
Are you using a desktop or laptop? If desktop, are you using the USB ports in the back? If laptop, have you tried different USB ports? Maybe try a different computer? I've heard that USB 3.0 doesn't play nicely with ODIN so it's good to find some 2.0 connections. What Windows version? I've heard that Win8 can cause problems. Could also try Heimdall instead of Odin.
Unless I think of anything else, is the cable in good working order (recent successful file transfer)?
Alright. I got things working somewhat. I had to use different drivers for each program for it to be able to detect it. I don't know, its annoying as hell, but it worked when I went back and forth between drivers.
Anyways, I got my device restored. But the whole point of this was that I was trying to get to the KitKat rom(Cyanfox). I am still quite a few steps away from that. I am actually further away than when I started,
This is what originally happened: I had my device rooted(from when I last used it, 1-2 years ago) and had the 3e recovery. So I found out I needed a modified 3e so I could install Clockworkmod. Got that, all was well, and the thing basically got bricked when I went to update to a new rom. It wasn't the kitkat rom, but a CM9 rom that I needed to go to first so that I could then update to kitkat.
Now I got it unbricked, and I updated it using kies. So now I am on gingerbread. So then I rooted it again. So now I have the 3e recovery again, the only problem is when I go to system/bin/ there is no file called recovery, and I can put one there but it does not affect the recovery, it still looks for signed files, meaning I cannot install Clockworkmod.
Not sure what to do...
Seems everyone follows this process (looks like you already did step one) now....
1. Either use Odin or Heimdall One-Click. Follow instruction on how to do it.
2. While phone running install sgs kernel flasher from Market/Google Play.
2a. Copy/transfer Synthesis GB Kernel to your Internal SD card.
2b. Start up sgs kernel flasher and choose it from your Internal SD card. Phone will auto-reboot after done flashing.
2c. Wait a bit while your phone convert to new partition format and activate lagfix. Your CWM recovery version should be 2.5.1.3
3. Reboot phone into CWM Recovery and DISABLE vodoo lagfix and /system lagfix. Reboot once done. Phone will convert partition to old format. If you don't turn the lagfix off the phone will hang at Samsung logo when you install new rom.
4. Prepare your flavor rom/gapp for installation by copying them to your Internal SD card.
4a. Go into CWM Recovery mode and install the rom. You will need to do this twice since the 1st time was just a warning about partition format being different.
4b. Reboot once done. You will need to REMOVE the battery to power down the booting process and put it back in.
4c. Go into the New CWM Recovery and install the rom again since the previous attempt only install the new CWM Recovery.
5. Install Gapp.
6. a. Wipe: Cache / Factory Reset <--- Probably don't need it since it's new install from stock unless you installed stuff. Just to be safe.
b. Wipe: Cache Partition
c. Wipe: Dalvik Cache
7. Reboot
Click to expand...
Click to collapse
I never tried step two myself, as I found a flashable download for ODIN that did this for me. But mine is a Rogers phone (not AT&T) so that would not work for you. Hope this helps.
Thanks you so much man. I know that is just copy/paste but I didn't see it, and it works. I was looking in Cyanfox thread, never looked at the Beanstalk thread.
Anyways I am in the process of doing this and it seems like it will work. Appreciate all your help!
Edit: Boom. Worked like a charm. Thanks so much. I am very happy now The funny thing is, half the reason I wanted this is cause everyone was group messaging, and I didn't have that capability anymore when I lost my phone(I was on such an old version). Again thanks so much.