Which kernel for our phone is the best taking performance and battery both into consideration.
As in which has the best battery backup and fastest speed?
Sent from my GT-I5800 using xda premium
You can use fugumod. As per the general consensus it's the most consistent. But finally it depends on your personal choice.
Does fugumod support recovery mode ??
Sent from my GT-I5800 using xda premium
maheshgadakari92 said:
Does fugumod support recovery mode ??
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
yes
isnt that obv..
satyamsit said:
You can use fugumod. As per the general consensus it's the most consistent. But finally it depends on your personal choice.
Click to expand...
Click to collapse
i know..
but fugu beta 2.4 standard edition lags for me on kyrillos 9.7.1
fugu beta 2.4 oc doesnt,but has nat as good a battery backup
G3 Mod
Even g3 mod oc is good. It has some innovative features like multiboot n stuff. But in the end its your personal choice.:angel:
varishtg said:
Even g3 mod oc is good. It has some innovative features like multiboot n stuff. But in the end its your personal choice.:angel:
Click to expand...
Click to collapse
But doesnt it have bad battery
Sent from my GT-I5800 using xda premium
satyamsit said:
You can use fugumod. As per the general consensus it's the most consistent. But finally it depends on your personal choice.
Click to expand...
Click to collapse
Do you use the kernel? Is there an original thread somewhere that we should peruse? I'm wondering how it stacks up against other kernels as far as features goes.
Also, what ROMs is it compatible with?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 08:20 AM ---------- Previous post was at 08:11 AM ----------
Whoops, just realized I'm in the wrong thread aren't I. Still trying to figure out how to delete posts, sorry again.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Try cm performance Kernal #889 or #888.both or gud
carthic69 said:
Try cm performance Kernal #889 or #888.both or gud
Click to expand...
Click to collapse
Are they for froyo? & links?
Sent from my GT-I5800 using xda premium
Arjav23 said:
Are they for froyo? & links?
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
As I understand it is for CM7. To my mind KisadworkX with G3MOD beats all other ROMs but I think with fugumod it would even battery(haven't tried though)
Fugumod Ultra with Stock deodex JPS
Using Fugumod ultra 1366 Mhz,great performance and battery backup...
Sent from my GT-I5800 using xda app-developers app
Try fugu mod standard for battery life and 667 mhz CPu
And fugumod ultra pre for overclocking to 1366mhz. .
Sent from my GT-I5800 using xda app-developers app
G3 Mod
I use G3Mod kernel OC. People say its a bit bad on the battery and sometimes i agree with it. I have a very old battery r u can say the battery which came with cell when it was launched and i bought it. Still sometimes with moderate to low usage i get almost a day worth of battery which is okay for me..
I havent tried fugumod much except for a few roms but was not comfortable with it...
Any kernel except G3Mod (With messed up battery drivers) is good.
dhirend_6d said:
Any kernel except G3Mod (With messed up battery drivers) is good.
Click to expand...
Click to collapse
well personally i found g3mod oc one of the most best kernels.. i didnt have any issues with the battery
I also use fugu. It's good.
Related
Does anyone know what's the best kernel to use I want an ext 4 kernel I'm running cm7 #42
Sent from my LG-P999 using XDA Premium App
snoopy1e11 said:
Does anyone know what's the best kernel to use I want an ext 4 kernel I'm running cm7 #42
Sent from my LG-P999 using XDA Premium App
Click to expand...
Click to collapse
There's really no "best" kernel; each phone's cpu is slightly different, and may work better with one kernel over another. Both the trinity kernels by morfic and faux's kernels have followings that love them; I personally and having great success with faux's stuff. Best to just nandroid, then try them each out and see what your phone likes best.
Aite I can dig that but wat do u use to overclock and undervolt cuz I dnt know wat settings to use with set cpu
Sent from my LG-P999 using XDA Premium App
snoopy1e11 said:
Aite I can dig that but wat do u use to overclock and undervolt cuz I dnt know wat settings to use with set cpu
Sent from my LG-P999 using XDA Premium App
Click to expand...
Click to collapse
Use pimpmycpu. Setcpu as I understand it doesn't work right with the tegra2 currently. You can get pimpmycpu for free here on xda (just search it), or if you want to support the dev you can buy it in the android market. As for specific settings, it once again comes down to each chip is slightly different, so you'll have to experiment. People will usually post what they've been successful with in the respective kernel's threads though, if you want a place to start at.
snoopy1e11 said:
Does anyone know what's the best kernel to use I want an ext 4 kernel I'm running cm7 #42
Sent from my LG-P999 using XDA Premium App
Click to expand...
Click to collapse
Faux cm7 kernel is pretty much your only choice since morfic hasn't updated his kernel with the newest cm7 chances in a while
Sent from my LG-P999 using XDA App
I have been using faux. Been very happy
G2x with CM7 and faux 1.8 kernel. [email protected] 5091 quadrant.
I can't find pimp my CPU on here anyone have a link I got setcpu running pretty gud but can't oc
Sent from my LG-P999 using XDA Premium App
What rom are you using I'm just tryna figure out wats the best for my ns4g, also wats the best kernel for speed and battery life?
Sent from my Nexus S 4G using XDA Premium App
I'm using MIUI 1.7.22 w/Matr1x v5.0 bfs and performance and batt life has been good. Koushdecks 1.2.1 is also good as well, Mikeys roms are pretty sweet too. But everyone has different taste on these kind of things. So try to use one that fits you best. I usually just switch from rom to rom once in awhile.
I'm using oxygen 2.1.6 just come from cm7.1
Sent from my Nexus S 4G using XDA Premium App
MIUI 1.7.22 with Matrix and my own build based off Koush's with Netarchy
the latest cm7 kang with an unreleased(yet) Trinity11 UV kernel.
Miui seems laggy or maybe I had the wrong kernel?
Sent from my Nexus S 4G using XDA Premium App
snoopy1e11 said:
Miui seems laggy or maybe I had the wrong kernel?
Sent from my Nexus S 4G using XDA Premium App
Click to expand...
Click to collapse
Try the modified MIUI by brainmaster: http://forum.xda-developers.com/showthread.php?t=1181050 (incl the - imho - best kernel)
I think that's for the ns only. Or am I wrong?
Brainmaster MIUI with Matr1x cfs...
Sent from my Google_Nexus_S using XDA Premium App
I'm using Matr1x 5.0 cfs kernel with stock ROM. I haven't OC'd but the native settings seems to be giving me a good balance between speed, stability and battery life.
So which kernal do you prefer, and why do you prefer that kernal?
Which do you prefer?
Sent from my Nexus S 4G using xda premium
Well I like matrix KERNEL cuz it has been really smooth for me. I also like bugles Pete's KERNEL cuz it also makes my phone run really smooth. But it all depends on the phone also. It could run good for me but u could have issues. I say just test them all out and see what feels better for u.
Sent from my Nexus S 4G using xda premium
I use Yennob-Base "Base1 -1.2 Overclock | Tiny Undervolt" by dfbonney, which can be found here.
im using miui with morfics teuv88 kernel. miui runs really smooth and it saves lots of battery. also try the other trinity kernels and the matrix kernel.
so now its your turn, flash and use them and decide whats the best kernel for you and your rom.
Sent from my Google Nexus S using XDA Premium App
I've been on matr1x and I just upgraded to the latest version 6.5 and I've had no issues. Maybe over the weekend I will try a new one and report back.
Sent from my Nexus S using Tapatalk
idelgado782 said:
I've been on matr1x and I just upgraded to the latest version 6.5 and I've had no issues. Maybe over the weekend I will try a new one and report back.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Me too. Very smooth and very stabil. I'm running stock ROM
Sent from my Nexus S using Tapatalk
been on matr1x 5.5 and 6 but since 6.5 have too many random reboots, voltage increasing didn't help although had no problem running trinity T144 and so i switched to trinity TUV for everyday.
I like the Matr1x kernel
markjonassen said:
Me too. Very smooth and very stabil. I'm running stock ROM
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
I didn't know u can run kernels on stock rom. Can u tell me how, I'm new
Sent from my Nexus S using xda premium
TEUV
Okay so I just flashed The TEUV 800Mhz Kernel and I lost WIFI
When I try to turn it on it just says error
Can anyone help?
I have a Tmobile Nexus S and I was on the stock rom with the James bond kernel before this. PLEASE HELP
I've used most of them my phone doesn't seem to like to work with Matr1x Trinity UV and EUV work flawlessly. and Buggless Petes one is the most stable for me i don't tend to use the extra functionality that comes with Kernels ..
irizwan said:
I've used most of them my phone doesn't seem to like to work with Matr1x Trinity UV and EUV work flawlessly. and Buggless Petes one is the most stable for me i don't tend to use the extra functionality that comes with Kernels ..
Click to expand...
Click to collapse
Hater.
Lol jk. Have u tried raising voltages
Sent from my HTC Sensation 4G using XDA App
mathkid95 said:
Hater.
Lol jk. Have u tried raising voltages
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
Lol seriously nah i didn't mess with voltages and such i've tried the old Matr1x it worked great specially with Nscollab
Btw ns collab update tomorrow, so you might wanna try matr1x tomorrow with it
Sent from my HTC Sensation 4G using XDA App
irizwan said:
I've used most of them my phone doesn't seem to like to work with Matr1x Trinity UV and EUV work flawlessly. and Buggless Petes one is the most stable for me i don't tend to use the extra functionality that comes with Kernels ..
Click to expand...
Click to collapse
I'm the opposite I can run anything but TUV or TEUV.
Sent from my Nexus S 4G using xda premium
In this thread you can post you config and ROM, what you use, with screen from antutu. Post was just to not clutter up the threads and discussions developer questions regarding the performance. If there is a lot of data, I compare different roms here
Cyanogenmod 10
I'm using Cyanogenmod 10 by Invedor, in my opinion ROM is faster then any other ICS ROM I tryed (BioHazzard, CM9, MIUI, Paranoid). And battery life is better. I found out that Castygnas kernel drains more battery than stock one and doesn't give you that much better smoothnes.
Don't get me wrong, I fully respect all the devs and their work, this is just my opinion based on using random roms in last year.
Screen is from CM10 alpha 3
CM10 Ivendor
Alpha3
Latest 3.X Kernel
I cant believe how fast it is. Galaxy nexus Niveau.
Im not joking when im saying that its the first time its FUN to play with my s plus :thumbup:
Sweeeet Jesus.
Sent from my GT-I9001 using xda app-developers app
Full wipe.
CM 10 by Ivendor. Alpha 2 + update to Alpha 3.
Interactive 368-1401 mHz. CFQ.
KSM enabled.
This configuration is smoothest for me.
Sent from my GT-I9001 using xda app-developers app
Shram32 said:
Full wipe.
CM 10 by Ivendor. Alpha 2 + update to Alpha 3.
Interactive 368-1401 mHz. CFQ.
KSM enabled.
This configuration is smoothest for me.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
+1:laugh:
i think that jelly bean roms are smoother, but app loading is faster on ics roms like Biohazard, maybe somethings lags because we got just alpha roms with JB for the moment.
XeLLaR* said:
CM10 Ivendor
Alpha3
Latest 3.X Kernel
I cant believe how fast it is. Galaxy nexus Niveau.
Im not joking when im saying that its the first time its FUN to play with my s plus :thumbup:
Sweeeet Jesus.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
how did you accquire the 3X kernel ???
There's a general section where this thread belongs
Sent from my Xperia Neo V using xda app-developers app
cm10 by ivendor
interactive/cfq, 245/1400Mhz
good performance, good battery life in standby!
metalrules321 said:
how did you accquire the 3X kernel ???
Click to expand...
Click to collapse
check this out ---> http://forum.xda-developers.com/showthread.php?t=2006683&page=2 POST
Code:
16
kouros17 said:
cm10 by ivendor
interactive/cfq, 245/1400Mhz
good performance, good battery life in standby!
Click to expand...
Click to collapse
3% in 10hrs?
Sent from my GT-I9001
Which kernel is best to get maximum performance in CM10 by ivendor?
mati1414 said:
Which kernel is best to get maximum performance in CM10 by ivendor?
Click to expand...
Click to collapse
Kernel by ivendor is the best
Sent from my GT-I9001 using xda app-developers app
So far I've got the best experience out of the combination of ivendor's CyanogenMod 9 BETA (Build 3) and CastagnaITKernel v7.3 CFS .
Shram32 said:
Kernel by ivendor is the best
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
the best kernel is definitely the new 3.0.52 Kernel by arco, but camera doesn't work..
and the new kernel is working fine with aokp build 2 by crybert.
zimmbadroid said:
3% in 10hrs?
Sent from my GT-I9001
Click to expand...
Click to collapse
Yes in deep sleep
mati1414 said:
Which kernel is best to get maximum performance in CM10 by ivendor?
Click to expand...
Click to collapse
The Castagna is for high scores but of ivedor is better
Shram32 said:
Kernel by ivendor is the best
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
I Agree
Hey guys, I'm using rooted stock gingerbread with tagb kernel 1.2 hotfix and I'm also using a mode i.e. Int2ext+. Everything is fine but recently my phone is shutting down on it's own even though there is enough battery. It happens once in a day while downoloading, browsing and listening to some music at the same time! My phone is overclocked to 691 mhz default by kernel, which makes my phone unstable! So, I have used "No cpu frills " app to bring it down to max:600mhz and min: 240mhz, governor : 'performance' or sometimes 'powersave' , scheduler: sio. I think unexpected shutdown is due to overclocking but i use "No cpu frills". Sometimes, my cpu runs to 691 mhz and if overclocking is the issue then how do i bring it normal frequency permanently without using any app or without applying the settings ( clocking at normal frequency) every boot using a app. Today, I was messing with the no cpu frills to change the governor to performance but my phone shutted down on its own. Please help me!
keep cpu min to 480 MHz and cpu max to 729 MHz. dont worry, this is very stable and doesn't drain the battery. also configure the settings to set these frequencies on boot. reply if the prob is solved.
Sent from my LG-P500
bigb1234 said:
keep cpu min to 480 MHz and cpu max to 729 MHz. dont worry, this is very stable and doesn't drain the battery. also configure the settings to set these frequencies on boot. reply if the prob is solved.
Sent from my LG-P500
Click to expand...
Click to collapse
I don't want to overclock. I want to solve the unexpected shutdown. Is overclocking a issue for unexpected shutdown?
Sent from my LG-P500, eating tastiest gingerbread ever!!!
yes it appears so..
Sent from my LG-P500
bigb1234 said:
yes it appears so..
Sent from my LG-P500
Click to expand...
Click to collapse
But it happens when my phone is not overclocked. What is the reason behind it? I was just switching the governors that's it.
Sent from my LG-P500, eating tastiest gingerbread ever!!!
ayazm.140895 said:
But it happens when my phone is not overclocked. What is the reason behind it? I was just switching the governors that's it.
Sent from my LG-P500, eating tastiest gingerbread ever!!!
Click to expand...
Click to collapse
My imei number doesn't match with imei number under the battery! I had also saved my imei number on my computer long ago and it doesn't match with my phone imei number and imei number ( under the battery )
Sent from my LG-P500, eating tastiest gingerbread ever!!!
Today I noticed a warm boot during a phone call, but it didn't got lost! Things can happen, but no idea why. No error message so far, just rebooting, no re-dialing.
Probably useless to search for the error. It happened once and not repeating since then anymore.
Sent from my GT-P1000 using xda app-developers app
---------- Post added at 06:26 PM ---------- Previous post was at 06:20 PM ----------
Else, let me additionally mention that I use freq. 122 - 749Mhz, ondemand govenor and sio sheduler :thumbup:
Sent from my GT-P1000 using xda app-developers app
Flash a new rom
Sent from my LG-P500 using xda app-developers app
anaknin said:
Flash a new rom
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
I like stock rom allot due to its stability!
Sent from my LG-P500 using xda app-developers app
ayazm.140895 said:
I like stock rom allot due to its stability!
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
Most likely due to incompatibility with the kernel. Try flashing Cm7 roms. I can assure you that you wont have any issues
Sent from my LG-P690 using xda premium
ayazm.140895 said:
I like stock rom allot due to its stability!
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
Gb based roms like GingerSnap and GingerDX are stabler than stock .. even on OC and multiple scripts
Sent from my LG-P500 using xda app-developers app
anaknin said:
Gb based roms like GingerSnap and GingerDX are stabler than stock .. even on OC and multiple scripts
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
I have tried gingersnap when it was new, I had issues with it. Camera quality on stock is impressive than any other Rom! Thanks for your reply buddy!
Sent from my LG-P500 using xda app-developers app
ayazm.140895 said:
I have tried gingersnap when it was new, I had issues with it. Camera quality on stock is impressive than any other Rom! Thanks for your reply buddy!
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
U can easily dl and use a third party camera like HDR camera apps on the playstore
Sent from my LG-P500 using xda app-developers app
---------- Post added at 12:58 PM ---------- Previous post was at 12:57 PM ----------
ayazm.140895 said:
I have tried gingersnap when it was new, I had issues with it. Camera quality on stock is impressive than any other Rom! Thanks for your reply buddy!
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
Or u can use a rom like ressurection .. stock modded rom
Sent from my LG-P500 using xda app-developers app
Could any tell me a way to undo the overclock permanently with out using 3rd party apps like editing some files .
Sent from my LG-P500 using xda app-developers app