Nice fitting belt-holster? - Nexus 4 Accessories

Anybody have a suggestion for a nice-fitting leather belt holster for the N4? I want to avoid buying something on Amazon that is either too large or too small.

See my earlier post on a case that I bought from Amazon. I'm very happy with it.

wmm said:
See my earlier post on a case that I bought from Amazon. I'm very happy with it.
Click to expand...
Click to collapse
2 questions if you don't mind---reviews indicated that the clip fails easily and that the case is bulky, can you comment on either of those?

I've only had it for a week so I can't say anything about its durability; seems solid enough initially, and I don't see any indication of incipient failure so far. (Besides, for $5, if it falls apart after six months, I figure I will have gotten my money's worth! )
As for the size, it's no bigger -- in relation to the phone -- than any other case of its type. I.e., it's about 1 cm longer than the phone and maybe 3 mm wider. It is, of course, a good deal thicker than the phone, since you have three layers of case -- back, front, and flap, each of which adds a couple of mm; maybe that's what that reviewer was referring to? Anyhow, I certainly don't find it to be unreasonably bulky, and I don't see how it could be much smaller and still fit and protect the phone.

wmm said:
I've only had it for a week so I can't say anything about its durability; seems solid enough initially, and I don't see any indication of incipient failure so far. (Besides, for $5, if it falls apart after six months, I figure I will have gotten my money's worth! )
As for the size, it's no bigger -- in relation to the phone -- than any other case of its type. I.e., it's about 1 cm longer than the phone and maybe 3 mm wider. It is, of course, a good deal thicker than the phone, since you have three layers of case -- back, front, and flap, each of which adds a couple of mm; maybe that's what that reviewer was referring to? Anyhow, I certainly don't find it to be unreasonably bulky, and I don't see how it could be much smaller and still fit and protect the phone.
Click to expand...
Click to collapse
Thanks, ordered.

This is what I got. I had something like this for an iPhone for 3 years and it still has a lot of life left in it. I think it should fit the phone even with a slim Rearth Ringke case.
I too must use a holster type case, I don't like carrying the phone in my pocket.

hfuizo said:
Thanks, ordered.
Click to expand...
Click to collapse
That holster is great for about 6 months, but then it starts to break down. Its a generic holster that has been sold forever. I used it with my Galaxy Nexus for months and with my previous phone for about a year before that. The elastic tore away from the leather on one side after 6ish months which I sewed back together terribly and the leather began to peal a little bit around the edges.
That said, I have never had a holster do much better than this. 6 months seems to be the limit for me before it starts really going downhill. This holster was great during its functional life. And its certainly cheap enough to just buy 2 a year.
Edit: Oh yea, the most annoying thing by FAR about this holster is that the magnets come loose in the flap, which at first just means 1 magnet sticks and its very loosely kept closed, but then after that other magnet slips there is nothing to really keep it closed before you shove a pin or knife through the leather to force the magnets back into proper position.
I know I sound harsh on this holster, but its not awful. Reading about it I just ordered another one from Hong Kong for $2.88. Will be here sometime next year probably.

Seidio needs to come out with a spring-loaded holster. I have one for my Evo 3d (waiting on Nexus 4 shipment...) and it's been great. Easily one of the best investments I made for my phone - including the extended battery beast and case.

sirxdroid said:
This is what I got. I had something like this for an iPhone for 3 years and it still has a lot of life left in it. I think it should fit the phone even with a slim Rearth Ringke case.
I too must use a holster type case, I don't like carrying the phone in my pocket.
Click to expand...
Click to collapse
Hmmm that looks nice, please report back and let us know how you like it.

imninsomniac said:
Seidio needs to come out with a spring-loaded holster. I have one for my Evo 3d (waiting on Nexus 4 shipment...) and it's been great. Easily one of the best investments I made for my phone - including the extended battery beast and case.
Click to expand...
Click to collapse
Seidio IS coming out with spring-loaded holster for use with Active or Surface cases. They are all in production now, but links are up on their website.

sirxdroid said:
This is what I got. I had something like this for an iPhone for 3 years and it still has a lot of life left in it. I think it should fit the phone even with a slim Rearth Ringke case.
I too must use a holster type case, I don't like carrying the phone in my pocket.
Click to expand...
Click to collapse
Got both the holster and the slim Rearth case. I like them both very much.
The Rearth is really slim and it seems very well made (made in Korea, not China, for a change). Not sure it adds any impact protection but that's fine, it will at least protect the back from scratches.
The holster seems decent too, well made, and it fits the phone well even with the slim Rearth case on the phone.
Overall I'm pretty happy with the combo. How's this for a mini-review?

Best One!
This Belt Holster Case looks awesome and genuine
Link
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Looks ok. Those of us in the USA will have to wait for the Koreans or Chinese to make one, I guess.

yogeshmha said:
This Belt Holster Case looks awesome and genuine
Link
Click to expand...
Click to collapse
Personally I'm not a fan of that type of clip.

hfuizo said:
Thanks, ordered.
Click to expand...
Click to collapse
If anybody else is interested in this, I received the holster and I'd give it an "okay" rating. As the Amazon reviews warned it is a bit too big. I could probably fit two N4s in there side by side. I am looking in to a Ringke case as well so maybe by the time I add that on there won't be so much space inside. I may try the holster sirxdroid recommended.

hfuizo said:
If anybody else is interested in this, I received the holster and I'd give it an "okay" rating. As the Amazon reviews warned it is a bit too big. I could probably fit two N4s in there side by side. I am looking in to a Ringke case as well so maybe by the time I add that on there won't be so much space inside. I may try the holster sirxdroid recommended.
Click to expand...
Click to collapse
Still happy with mine. It's a bit tight with the Ringke case, but not bad at all and it seems to "give" some so it will get better with use.

hfuizo said:
If anybody else is interested in this, I received the holster and I'd give it an "okay" rating. As the Amazon reviews warned it is a bit too big. I could probably fit two N4s in there side by side. I am looking in to a Ringke case as well so maybe by the time I add that on there won't be so much space inside. I may try the holster sirxdroid recommended.
Click to expand...
Click to collapse
Hmm, I'm wondering if you got the same case I did; sometimes these generics have multiple suppliers and different lots can be variable. I definitely couldn't fit two N4s into my holster -- it's not a tight squeeze (I don't have to push the phone in), but the N4 is certainly not rattling around in it. Here's a photo of what my phone looks like inside the case. I think it's just about right for ease of access while not being overly roomy.

wmm said:
Hmm, I'm wondering if you got the same case I did; sometimes these generics have multiple suppliers and different lots can be variable. I definitely couldn't fit two N4s into my holster -- it's not a tight squeeze (I don't have to push the phone in), but the N4 is certainly not rattling around in it. Here's a photo of what my phone looks like inside the case. I think it's just about right for ease of access while not being overly roomy.
Click to expand...
Click to collapse
Yeah I think mine is different than that, the stitching doesn't look the same and my phone isn't in there nearly as snug.
As a side note I also bought the holster recommended by sirxdroid. I like it much better, the fit is perfect.
However....
It has the most unfortunate side-effect of either unexpectedly rebooting or shutting down my phone. I don't know what causes this, if the buttons are somehow getting mashed just right or if maybe the magnet has an effect on the phone. So sadly this case is unusable and I'm now back to Big Bertha.

hfuizo said:
It has the most unfortunate side-effect of either unexpectedly rebooting or shutting down my phone. I don't know what causes this, if the buttons are somehow getting mashed just right or if maybe the magnet has an effect on the phone. So sadly this case is unusable and I'm now back to Big Bertha.
Click to expand...
Click to collapse
That is strange, the case is not rebooting my N4, though the phone itself does reboot once in a while for me too but I suspect it's related to bluetooth use and it has nothing to do with the case. Not sure whether you use bluetooth or not, it may be worth keeping it completely off for a while and see if the phone still reboots.
I also have the Rearth case on my phone which makes the buttons a bit harder to press, so maybe that helps the holster not press on the phone buttons inadvertently.

this looks intersting
hfuizo said:
Anybody have a suggestion for a nice-fitting leather belt holster for the N4? I want to avoid buying something on Amazon that is either too large or too small.
Click to expand...
Click to collapse
and the phones references in the desc, seem to make me thing t should the nexus ok
http://www.amazon.com/Evecase-Execu...8-5&keywords=Black+PU+leather+Belt+case+nexus

Related

[Q] Really can't decide on a case!?

Should get my desire HD tomorrow and get shut of my iphone 4 but I just can't decide on a case for the thing, I'm leaning towards the case mate tough (had one for both my iPhone 4 and Galaxy S) but I find it a bit on the industrial side, the pop looks nicer but to be honest looks twice the size of the tough, I'm even contemplating just using a screen protector plus official HTC slip case.
If anyone has experience with any or all of those cases your input would be appreciated. Thanks.
I heard a lot of people are using otterbox defender and otterbox commuter. Try searching for it, you might like it.
Wouldn't get anything other than an otterbox commuter from now on for my phones, very impressed with this one
Sent from my Desire HD using XDA App
I've bought a few and my favourite is the Case Mate tough. You wont be disappointed with that one. I have recommended it a few times and others have got it and they are very happy. It improves the DHD feel and obviously offers good protection as its a dual case.
I also have the Case mate pop case thats good too. But I would say go for the Case mate Tough.
Heres a video of the Tough
http://www.youtube.com/watch?v=WVLhkJ6VzuQ
And heres the Pop which actually shows the Tough as well in this video
http://www.youtube.com/watch?v=oEunNuz7hU8
Dito
The commuter is a great case!
mrbubba999 said:
Wouldn't get anything other than an otterbox commuter from now on for my phones, very impressed with this one
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Sent from my Desire HD using XDA App
I'm just wondering and not trying to piss anyone off, but... You've got a phone made out of one-piece metal, it's big enough as it is without any extra and it's almost all screen. So the question here remains why you wan't to have a case for it to begin with? I've had mine since launch and all I've got is an invisibleshield screen protector (just to keep excess fingerprints off, which it does very well, and a little scratch protection just in case) and there's not a single scratch or mark in it anywhere. I've drop it a few times and nothing. I'm just saying that all kinds of bumpers etc are an iphone thing and really not needed with the DHD, which just makes it even greater! Just flash it off as it is Just my 2 cents though.
There are quite a few threads about different cases.
I prefer this one which I reviewed in this thread. They are available under a different name for much cheaper on eBay according to other users. I love the look, lines and feel of the phone with it on.
Grant Barker said:
There are quite a few threads about different cases.
I prefer this one which I reviewed in this thread. They are available under a different name for much cheaper on eBay according to other users. I love the look, lines and feel of the phone with it on.
Click to expand...
Click to collapse
Yeah that's the kind i got for £3 odd off of amazon, it doesn't add much to the size but it keeps it safe when I drop it and provides some protection to the screen as well
I've got the Otterbox Commuter. Feels well protected but the only draw back with this case is that the silicon cover is a dust magnet (like others made of the same material I'd imagine). It can be a little nagging when trying to pull the phone out of your pocket as well. The weight and feel of the phone in your hand is improved in my opinion -- it doesn't feel as delicate and slippery as the phone is without the case. The plastic casing is rugged, but rather smooth. If you have a dry hand, the potential of it slipping from your hands is there. I like the Case-Mate Pop idea of having a grip on the long edge of the phone.
Also, try to find an alternative cloth/material to wipe the screen down prior to applying the screen protector. The one that comes with it pretty dusty and ruined my screen protector. Use a credit card and not the flimsy applicator card.
If I'm not mistaken, the screen protector that comes with the Otterbox looks nearly identical to the ones you can get off dealextreme (specific to the DHD) for less than a couple of bucks. I wouldn't be surprised if they were in fact the same!
I have a few days to return the case. I'm 80% convinced I want to keep it only because the dust accumulation and "pocket stick" is bothering me enough. If it were a ~25$ case, I could live with it... but for $44 CAD, it's a little tough to swallow.
I'm wondering if there are any fashionable aluminum casings for the HTC Desire (I saw one, but looked a little odd with the belt-clip adapter on the back of the case). I'm also wondering if aluminum interferes with the phone's radio.
Ended up going for the pop, think it's the best looking of the lot offering the same level of protection. I will let you know how I get on with it, cheers for the input guys.
Daley87 said:
Ended up going for the pop, think it's the best looking of the lot offering the same level of protection. I will let you know how I get on with it, cheers for the input guys.
Click to expand...
Click to collapse
was gonna order the pop today..but out of stock
Vispe85 said:
I'm just wondering and not trying to piss anyone off, but... You've got a phone made out of one-piece metal, it's big enough as it is without any extra and it's almost all screen. So the question here remains why you wan't to have a case for it to begin with? I've had mine since launch and all I've got is an invisibleshield screen protector (just to keep excess fingerprints off, which it does very well, and a little scratch protection just in case) and there's not a single scratch or mark in it anywhere. I've drop it a few times and nothing. I'm just saying that all kinds of bumpers etc are an iphone thing and really not needed with the DHD, which just makes it even greater! Just flash it off as it is Just my 2 cents though.
Click to expand...
Click to collapse
The Case mate Tough in particular greatly improves grip and feel of the phone, without it the DHD feels quite slippery and it just offers good protection.
I think increasing the grip is a bit more important (sorry that I'm posting it on this thread). But the way the DHD was designed, it's a bit awkward to hold which kinda bothers me.
so yeah, getting a case = definitely worth it =)
Grant Barker said:
There are quite a few threads about different cases.
I prefer this one which I reviewed in this thread. They are available under a different name for much cheaper on eBay according to other users. I love the look, lines and feel of the phone with it on.
Click to expand...
Click to collapse
Hi Grant, just wondering where you got the tpu case, from Japan? I know they do very precisely cut case with fine finish so want to buy one as well. Thx!
Sent from my Desire HD using XDA App
Daley87 said:
Ended up going for the pop, think it's the best looking of the lot offering the same level of protection. I will let you know how I get on with it, cheers for the input guys.
Click to expand...
Click to collapse
Got my device yesterday and I'm still thinking of getting a leather case to protect my device against slips. But I'm also looking at hard rubber casing.
S-line curve gel case black
i just received S-line curve gel case
http://cgi.ebay.ch/ws/eBayISAPI.dll?...ht_1588wt_1139
its a cheap good case, stylish , doesnt add bulk , adds very good grip on that mesh at the phone's sides , buttons r easy to use and they kinda pop out of the case so they r easily reachable (unlike other gel cases).
definitely recommend it as its very cheap and offers good protection and doesnt distorts the shape of the phone much.
h.han said:
Hi Grant, just wondering where you got the tpu case, from Japan? I know they do very precisely cut case with fine finish so want to buy one as well. Thx!
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Yes. I got it from Yodobashi Camera (a store) in Japan.
Funnily enough, I'm supposed to be reviewing 2 more cases from the same store today, my day-off (if I can wake up). They are both SoftBank branded cases. One is a TPU case and is almost the same but is different, and one is a leather one (which to be honest I don't like).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Goodm7sn said:
i just received S-line curve gel case
http://cgi.ebay.ch/ws/eBayISAPI.dll?...ht_1588wt_1139
its a cheap good case, stylish , doesnt add bulk , adds very good grip on that mesh at the phone's sides , buttons r easy to use and they kinda pop out of the case so they r easily reachable (unlike other gel cases).
definitely recommend it as its very cheap and offers good protection and doesnt distorts the shape of the phone much.
Click to expand...
Click to collapse
It would be nice to see the picture.. Thanks for the link but it is no longer available..
h.han said:
Hi Grant, just wondering where you got the tpu case, from Japan? I know they do very precisely cut case with fine finish so want to buy one as well. Thx!
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Also try to check out dealextreme.com
Seems to be the same case for 2,10$
edit/ I just ordered myself one from there, but I guess it's going to take a long time
Otterbox commuter, my first case for DHD and will now always have one on any smartphone I get!
Sent from my Desire HD using Tapatalk

TPU Case from Amazon Review

Picked up a TPU case from Amazon. http://www.amazon.com/gp/product/B0054HA45A
It's pretty much the bomb if you are looking for a TPU case. Cutouts for surround sound mic holes on back and all of the cutouts line up near perfect.
It fits the phone perfectly. I recommend. It's only 8 bucks and they have a few different colors. I got the gloss black. Free shipping if you are a prime member like me.
Sorry, there is dust all over my phone in these pics. It's not sparkly. The case is super rigid TPU. It's not the dust/lint attracting silicon BS you get at T Mobile. I was in a dusty environment when taking the pics.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As I stated in the cases thread, I also own this very nice case.
I also mentioned the downsides it has for me so far, which are the pretty hard to use volume rocker and hard to reach power button. Volume rocker might be due to the way I used to press it on my DHD, there seems to be a position when it actually works pretty easy. But the power button will always be a pain.
Yet, it's actually a failure of HTC, the power button on the side is the only thing I like about the SGS2 which I would LOVE to see on a future HTC phone.
eisteh said:
As I stated in the cases thread, I also own this very nice case.
I also mentioned the downsides it has for me so far, which are the pretty hard to use volume rocker and hard to reach power button. Volume rocker might be due to the way I used to press it on my DHD, there seems to be a position when it actually works pretty easy. But the power button will always be a pain.
Yet, it's actually a failure of HTC, the power button on the side is the only thing I like about the SGS2 which I would LOVE to see on a future HTC phone.
Click to expand...
Click to collapse
I didn't see your post. I am having no issues with the volume rocker, but I really don't use it much I guess. I never listen to music on my phone.
I would love for this phone to have the power button on the side. All of these Android phone manufacturers should follow Samsung's lead and put them on the side. Everyone is putting them at the top these days! It's pretty awkward pushing a button on the top to lock it every time you put it down.
Loving this case!
wish these came in flat black or non opaque colors.
methodz said:
wish these came in flat black or non opaque colors.
Click to expand...
Click to collapse
Matte black would be better
Sent from my HTC Sensation 4G using XDA Premium App
Its funny you all complain about the Volume on the top. I remember when the Galaxy first came out there was A LOT of complaints about the power button being on the side. I dont mind the where the power button is on my Galaxy or Sensation... Shrugs.
I do have a question tho. The 2 holes on either side of the camera and the 2 holes near the bottom, what are they for? The TPU case i bought from Amzer (SP?) dont have those holes free. I wonder if they will cause a problem.
Google told the holes are for the antenna connectors.. So it shouldn't be a problem when it's covered.
acjames said:
Its funny you all complain about the Volume on the top. I remember when the Galaxy first came out there was A LOT of complaints about the power button being on the side. I dont mind the where the power button is on my Galaxy or Sensation... Shrugs.
I do have a question tho. The 2 holes on either side of the camera and the 2 holes near the bottom, what are they for? The TPU case i bought from Amzer (SP?) dont have those holes free. I wonder if they will cause a problem.
Click to expand...
Click to collapse
You must have big hands.
Sent from my Xoom using XDA Premium App
I do.... Ha!
Thanks for the review! It looks pretty good in the pics.
Hard shell is never my thing.. I don't like silicon cases because of the friction and lint accumulation. Just ordered it on Amazon, I will wait and see if I can live with the added thickness.
I've gone naked for the past few days, I've never used any cases with my blackberry or previous HTC phones. I've never tried TPU cases before, I guess it doesn't hurt to try for 8 bucks.
jparity said:
Thanks for the review! It looks pretty good in the pics.
Hard shell is never my thing.. I don't like silicon cases because of the friction and lint accumulation. Just ordered it on Amazon, I will wait and see if I can live with the added thickness.
I've gone naked for the past few days, I've never used any cases with my blackberry or previous HTC phones. I've never tried TPU cases before, I guess it doesn't hurt to try for 8 bucks.
Click to expand...
Click to collapse
It adds almost no thickness to the phone. My brother asked me why I didn't have a case when he was playing with it today.
Someone gave this a one star review on Amazon because the volume rocker is harder to press. It's not that hard. Plus you could easily get an exacto knife and cut it out yourself. You will like this case dude.
Sent from my HTC Sensation 4G using XDA Premium App
jparity said:
Thanks for the review! It looks pretty good in the pics.
Hard shell is never my thing.. I don't like silicon cases because of the friction and lint accumulation. Just ordered it on Amazon, I will wait and see if I can live with the added thickness.
I've gone naked for the past few days, I've never used any cases with my blackberry or previous HTC phones. I've never tried TPU cases before, I guess it doesn't hurt to try for 8 bucks.
Click to expand...
Click to collapse
Yeah, you won't regret it
You won't notice the extra thickness in width, maybe in height, but it doesn't really matter there.
I picked one up before getting the phone. Fits nicely, you can barely notice the thickness. I just wish they had clear one instead of the smoked one that I've got.
Hi!
For people who can't order on Amazon.com (I'm in Belgium and I can't order this item via Amazon), it's also available on eBay. Object numbers are : 260799343153, 260799345693, 250834600173 (inexpensive delivery).
Regards.
jparity said:
Thanks for the review! It looks pretty good in the pics.
Hard shell is never my thing.. I don't like silicon cases because of the friction and lint accumulation. Just ordered it on Amazon, I will wait and see if I can live with the added thickness.
I've gone naked for the past few days, I've never used any cases with my blackberry or previous HTC phones. I've never tried TPU cases before, I guess it doesn't hurt to try for 8 bucks.
Click to expand...
Click to collapse
Just got it and put it on this morning.
Gotta say I love the fit and finish. Everything fits perfectly without being too tight or lose. It definitely does a great job of preventing scratches or bumps. Now I could toss and slide the phone all I want without worrying scratching the back. The case also doesn't pick up too much pocket lint like silicon cases, while adding friction while holding the phone and minimize incidental drops.
Minor negative is that the power button and volume rocker is noticeably harder to control/press than before without using the case. The added thickness does not subtract from the user experience, but it does add ever so slightly to the bulk.
Then again, which case doesn't have those cons? For 8 bucks, it is a great case. I'll keep using it for now till I find myself using the volume rocker more frequently, which I do use quite often for music and in-call volume adjustments.
If only it wasn't so shiny
I purchased this case as well, it is absolutely fantastic. It fits so perfectly, and I can't believe the price. I was worried I wouldn't like the shine, and that it would be loose, but I've gotten used to it, and it fits tight to the phone. Definitely one of the best cases I have ever owned for any device.
I got mine off Amazon, from TPU Case. Very nice black, I can't complain. I always get TPU cases for my phones but I never got black. They sell the exact same ones on eBay for $8.95 except the shipping is free.
I used the camera on my camcorder, very bad quality but hopefully you can see the holes and what not.
Just got the all black one today, I must say it is a perfect fit, never had a case that fitted this well. No bulk at all, feels just as slim.
I purchased this on Amazon last week. Note it was $7.98 and now it's $8.90. Crazy the price went up, haha!
Here's my review:
I've never used a product before made out of "Durable Flexible TPU (Thermoplastic Polyurethane)" but it seems to do the job quite well. It's an extremely hard durable plastic with just a tiny bit of flex so you can get the case on the phone. (A word of warning: you won't be taking this case off too often because it's really difficult to do so! Once it's on, it's meant to stay!)
As for protecting the phone, it seems like it will do the job. It's sealed *extremely* tight, so hopefully it won't let dust/lint in there like those cheap rubber cases do.
It looks great too, since it's a shiny/glossy black color. That means it's also easy to slip in and out of a pocket, unlike the cheap rubber cases that will stick to the inside of your pocket.
The only bad thing I can see is that it gets kind of greasy easily, even if you wash your hands often. And over time, scratches might show easily as well. (I'll update the review if the case gets scratched or something in the future, but so far so good.)
Overall though, for the price (which was actually a tiny bit lower last week when I bought it) I am extremely satisfied with this case. I want maximum protection and Otterbox is currently refusing to put out a case for the Sensation (not to mention their cases are expensive too). So in the mean time, this TPU case seems to be handling the job quite well. Hopefully my phone remains in perfect condition for the next year so I can resell it easily.
I would highly recommend this case to other Sensation owners, especially for the price, and even more so if you are an Amazon Prime member for the free shipping. It is a pretty great product and I would certainly consider purchasing their cases for my future phone(s).

Seidio Case Review for Skyrocket

I have been using Seidio cases for multiple generations of phones now going way back to the original Blackberry Pearl. I have given a few other styles a shot at times but I keep finding myself coming back to the Seidio cases. They have always held up well and the fact that they have a combination holster that works specifically with their cases was a bonus.
I have to backtrack a little before I get into this review. Had it not been for a miniscule moment of innapropriate anger, I would not have a new phone in my possession. Had it not been for the Seidio case on that phone, I would not have been able to get into it for all my needed information. So, in a matter of seconds I had taken a full pitching arm swing with phone in hand and aimed at garage floor. In all fairness, I had worn that Atrix out to the point where it was on its last leg(maybe subconsciously I was yearning for a new phone). Anyway, I digress, the phone ended up with its screen shattered and the shell slightly bent(I hit the concrete directly on the corner). To the credit of the case, it never came off and the phone stayed on the whole time without rebooting. I put a piece of packing tape over the screen, so as not to get cut by the shards of glass poking out, and I was able to swipe up, down, left and right. However ugly the situation, if that case wasnt on there, the phone wouldnt have been accessible. Now some might argue that having another brands case that rhymes with "hotter fox" might have saved it completely, I find it incredibly uncomfortable to use a phone that becomes 3 times its size because of a case. Nuff said.
I ended up replacing the Atrix with a new Skyrocket. This phone is downright awesome and puts the Atrix to shame in every department. However, we arent here for a phone review, so lets get on with it. I knew I wanted a case on the phone immediately so I picked up one of those slick rubberized cases(skin?) that stretches over the back of the phone and around the sides. This was a decent option but I am part of the 1% out there who wears their phone on their hip at work, I hate putting my phone in the pocket(unless Im wearing jeans). So, I needed a case that had a holster and thats where Seidio came in.
I looked through Seidios options and saw they had two types of cases for the phone and holsters that matched. Since this phone was pretty big, I wanted to stay with the slimmer type case that I had been used to in the past which was the "Surface" style. They also have an "Active" style which is apparently much more protective like the previously mentioned brand but more attractive. With this case I ordered it as a combo with the holster. One of my main concerns was how this phone would look on the hip, in a case, being how large it is in the first place. In retrospect, choosing a black case would have made the most sense for that argument. However, I chose the blue case because, well, I like blue, and I got the phone in white, so I figured I would nickname my phone the "Smurf".
A week or so later I received the package with the case and the holster. First thing I noticed was how absolutely cool the blue finish was on the case. It has almost a metallic hue to it yet is fully plastic. The feel of the case is as it has been in the past; not too grippy but not too slippery. It has a nice texture to it that lends itself to being able slide in and out of a pocket without pulling out lint but also not feeling like it will slide out of your hand when holding it.
I put the phone into the case and the pieces snapped together with authority. Take note, the first time you need to disconnect the two pieces will be a struggle. After that however, it will be an easy task. Just seems that the pieces need to get broken in for a bit before they come apart with ease. As I was holding the phone with the case on it, I noticed that it didnt feel that much bigger with it on. The case is really tight fitting and seems to just barely come off the "Surface" of the phone. There is enough protection above the front bezel though that you can place the phone face down and it wont touch the screen. The only thing that I wasnt too keen on was how deep the cut was to reach the power button. It seems to be at such an angle that you have to get your fingertip in there to press it right. Maybe over time that will change but at first it was an odd behavior.
Next up was wearing the phone to work on the holster. How did it go? Awesome! There is no denying that when you have a phone of this size on your hip, it does get noticed. There is no getting around the fact that nowadays, nobody wants a phone the size of the old V60, and because of that, you are hauling around a nice sized piece of web viewing real estate. I have to say though, I got tons of compliments on the case color. Everyone who saw it said they had never seen a color like that before, or as they held it in their hand, a case that looked so cool. The phone was light to begin with and the case did nothing to hurt that. The holster is very grippy but seems to disappear from the hip when the phone is in it. The weight distribution keeps the phone very close to the body and feels like its just there coming along for the ride. The holster is very sturdy and the phone clicks into it with a loud informative SNAP.
After about a week of wearing the phone daily to work in the holster and a few instances of slipping it into my jeans, I wholeheartedly recommend Seido cases yet again. After saving my old phone the way it did and the new materials they seem to be using, Seidio has a hit on their hands. With how well their manufacturing is and perfectly fit around the phone these cases are, theres really no reason to look anywhere else for something to protect your phone. Oh, and since my original rant, I have had no problems using the power key anymore.
And now the pics:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for the helpful review. I enjoyed the back story as well.
I think if I do end up purchasing this phone, the Seidio case is the first I'll try.
Thanks for the review, man!
I can second a recommendation for this case.
To be honest I just found I enjoyed my phone a bit more without a case on it, admittedly having to be a bit more careful with it.
If I had any complaint about the case it would be that where the two pieces connect. I can see where that was going to potentially be an annoyance down the road.
I have one and it's to slick for me. I run my phone nekkid now. The case cured me of wanting a case.
my .02 worth.
I got one today and it seems pretty nice so far. As mentioned, it can be hard to get it apart (off the phone) to begin with until you can figure a method that works best. I already have a Seidio Active case and I like it alot, but it is a bit bulkier than the Surface case. I think I will like this one because it works in my phone side carry case that I use at work. The Active was to bulky to use so I had to change over to my Diztronics case during the week. With this case, I think I'll be able to use it in the side carry case as well as in the holster that I bought with it. Just for some information, it seems that the Active holster works as well as the Surface holster for carrying purposes while the Surface case is on the phone. The phone seems to fit into both of them just the same so you might want to save some money if you already have an Active holster.
Why in the heck is there no kickstand??
I LOVE this case and my friends are always bragging about theirs having an awesome kickstand so they can watch movies on their puny S2 screens... Can anyone explain why the big, bueatiful SkyRocket cant stand up like a rocket? A rocket needs a stand to fly!!! Come on guys! Show me how stupid I am and where to get a kickstand case
toothpick5 said:
I LOVE this case and my friends are always bragging about theirs having an awesome kickstand so they can watch movies on their puny S2 screens... Can anyone explain why the big, bueatiful SkyRocket cant stand up like a rocket? A rocket needs a stand to fly!!! Come on guys! Show me how stupid I am and where to get a kickstand case
Click to expand...
Click to collapse
The "Active" case has a kickstand.
scott14719 said:
The "Active" case has a kickstand.
Click to expand...
Click to collapse
Indeed it does. Ive been using it since i got my SR in February. I love it. Very sturdy and protective without adding much bulk.
Sent from low Earth orbit with my Skyrocket.
I had this case but, returned it. The bottom part was a tad loose and would shift a bit in my hand. Not much but, enough to notice each time and make me give a grunt of displeasure. Also, the headphone jack area was just not large enough for a couple of my connections( I aux jack into home stereo and car stereo). Finally, the openings around the rocker switches just felt wierd to me. Low on the backside and high on the front side. A friend of mine has an Elago case for his Note. But, that they don't make one for the Skyrocket. That is the style I am looking for. I'm picky I admit. I would rather go naked than uncomfortable.
This looks great. I wanted something slimmer than my Seidio Active case.
Thanks!
Looks good, gonna switch it up.
Sent from my SAMSUNG-SGH-I727 using XDA
Just fyi, if you have a Best Buy near you, Seidio sells under the brand name Platinum Cases and it's actually $10-15 cheaper for the combo set with the holster.
I've used seidio for a while too now and when I was searching for a case I found this out and saved myself a good amount of cash since I also didn't have to pay for delivery... Same construction, no problems. Although I think the only color they have is black... I did notice the bottom is a tiny bit loose but I ended up buying a ghost armor screen protector and since I was there ended up getting the full body so now the case fits like a glove.
Hyper, with ya on the 1% that like to carry phone in the holster...lol I even wear it with jeans altho shirts always cover it...lol

Kickstand Case Suggestions for Galaxy S5

Anyone have any suggestions for a good kickstand case, I would like something that stands both vertical and horizontal view. I do not care about branding, ebay brandless is OK by me (and cheaper). Preferably hybrid.
I am liking this one so far, but I can't find a US vendor for the color I like (lime).
http://www.grashine.com/en/product1.asp?idd=76&ids=4&SortID=74&id=74&idid=24&ord=100#
What kickstand cases do you like/have?
QUESTION REVISED 4/29/14:
What is the best kickstand case under 10 bucks that I can cannibalize to remove the kickstand (to then epoxy it to my favorite S5 non-kick case)?
I used to try to find and use kickstand cases , but 2 yrs ago I cam across the flygrip which was perfect for me as I got tired of searching all the time for a case , now I an purchas any case I find and attach the flygrip directly to it , have a holder on my device to I never drop it and also a kickstand in both directions.
I haven't seen a decent case with a durable kickstand that is stable in both horizontal and vertical positions since the S3 was released (Qmadix case).
So, for my S4 I just found the coolest case and then cut a hole on the back and DIY'd my favorite kickstand (Qmadix) into it.
Unfortunately, that company no longer makes the kickstand case for any phones.
But a nice alternative is to get a stick-on kickstand.
http://www.mouseglider.com/pro1445718.html
Put it on any case.
ex-28 said:
I used to try to find and use kickstand cases , but 2 yrs ago I cam across the flygrip which was perfect for me as I got tired of searching all the time for a case , now I an purchas any case I find and attach the flygrip directly to it , have a holder on my device to I never drop it and also a kickstand in both directions.
Click to expand...
Click to collapse
I had never seen those before. Thanks! Definitely an option.
I am a bit wary of the girth of the item and how it might dig into my leg, or my jeans while the phone is in pocket.
Maybe choose a wallet style case that let's you use the lid as a stand?
Airax said:
Maybe choose a wallet style case that let's you use the lid as a stand?
Click to expand...
Click to collapse
https://www.otterbox.com/Defender-Series-for-Samsung-GALAXY-S5/sam2-galaxy-s5-set,default,pd.html
The proven option and my personal *go to* case for all phones.
Airax said:
Maybe choose a wallet style case that let's you use the lid as a stand?
Click to expand...
Click to collapse
Not durable enough for me, not any that I have seen at least.
I've been using this one for all my GS phones. Very sturdy and not overly bulky plastic that looks much nicer in person. I need only the kickstand feature (the bottom part), can't say anything about the holster.
http://www.amazon.com/gp/product/B00IO8NI0Y/ref=ox_sc_imb_mini_detail?ie=UTF8&smid=AY3SA6XQV4F15
ecksor said:
I've been using this one for all my GS phones. Very sturdy and not overly bulky plastic that looks much nicer in person. I need only the kickstand feature (the bottom part), can't say anything about the holster.
http://www.amazon.com/gp/product/B00IO8NI0Y/ref=ox_sc_imb_mini_detail?ie=UTF8&smid=AY3SA6XQV4F15
Click to expand...
Click to collapse
thank you for finding this. imho - its the best case you can get. i have been using them on all of my phones. i am just hesitating so much considering the phone is already so big :-/
km8j said:
thank you for finding this. imho - its the best case you can get. i have been using them on all of my phones. i am just hesitating so much considering the phone is already so big :-/
Click to expand...
Click to collapse
Looks interesting
Cimo Galaxy S5 Case on Amazon
ecksor said:
I've been using this one for all my GS phones. Very sturdy and not overly bulky plastic that looks much nicer in person. I need only the kickstand feature (the bottom part), can't say anything about the holster.
http://www.amazon.com/gp/product/B00IO8NI0Y/ref=ox_sc_imb_mini_detail?ie=UTF8&smid=AY3SA6XQV4F15
Click to expand...
Click to collapse
My Galaxy S5 came in yesterday (AT&T). I'm thinking OtterBox but until those are ready I've ordered this beaut:
http://www.amazon.com/gp/product/B00IK075DW/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
maddix said:
My Galaxy S5 came in yesterday (AT&T). I'm thinking OtterBox but until those are ready I've ordered this beaut:
http://www.amazon.com/gp/product/B00IK075DW/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I had this for the S3, the hinge got brittle and cracked. Just FYI.
ecksor said:
I've been using this one for all my GS phones. Very sturdy and not overly bulky plastic that looks much nicer in person. I need only the kickstand feature (the bottom part), can't say anything about the holster.
http://www.amazon.com/gp/product/B00IO8NI0Y/ref=ox_sc_imb_mini_detail?ie=UTF8&smid=AY3SA6XQV4F15
Click to expand...
Click to collapse
This was a contender, but I am gun shy on hard cases. I go to the beach frequently, and sometime end up with a little sand in my pockets. A hard case will rub sand into your phone. If even the tiniest amount gets under, your phone will have massive surface damage. Also, not the greatest corner protection for drops.
I REALLY like the kickstand.
Otterbox knock-off under $20 from eBay (iskyphone)
adrockr said:
I had this for the S3, the hinge got brittle and cracked. Just FYI.
Click to expand...
Click to collapse
Thanks for the heads-up. In fact I never opened that case and it has gone back.
For ~$18 including shipping I was able to order an Otterbox knock off from iskyphone on eBay (since removed but they claim it will be re-listed). Camo/orange, case is identical in the way it all goes together, and the belt clip doubles as the kickstand. It's not waterproof but the phone is so that's a wash imho. The case includes a built-in screen protector which I'm not a fan of. It's not the cleanest/clearest plastic but with the brightness of the phone you can't tell any difference (again, imho). Pressing around the edges can be tricky (aka pressing the 'a' key for example), but I suppose the screen needs protecting also.
All in all I'm happy with it and also not having spent an additional $42. Perhaps the official OB is better, but probably not two thirds better.
---------- Post added at 04:31 PM ---------- Previous post was at 04:04 PM ----------
adrockr said:
I had this for the S3, the hinge got brittle and cracked. Just FYI.
Click to expand...
Click to collapse
maddix said:
Thanks for the heads-up. In fact I never opened that case and it has gone back.
For ~$18 including shipping I was able to order an Otterbox knock off from iskyphone on eBay (since removed but they claim it will be re-listed). Camo/orange, case is identical in the way it all goes together, and the belt clip doubles as the kickstand. It's not waterproof but the phone is so that's a wash imho. The case includes a built-in screen protector which I'm not a fan of. It's not the cleanest/clearest plastic but with the brightness of the phone you can't tell any difference (again, imho). Pressing around the edges can be tricky (aka pressing the 'a' key for example), but I suppose the screen needs protecting also.
All in all I'm happy with it and also not having spent an additional $42. Perhaps the official OB is better, but probably not two thirds better.
Click to expand...
Click to collapse
"Tree-Orange" --> http://www.ebay.com/itm/For-Samsung...Cell_Phone_PDA_Cases&var=&hash=item3f349d1d05 :good:
adrockr said:
I had never seen those before. Thanks! Definitely an option.
I am a bit wary of the girth of the item and how it might dig into my leg, or my jeans while the phone is in pocket.
Click to expand...
Click to collapse
have a peek at the youtube videos on the flygrip , there very slim and sturdy i just got my flygrip gravity new style then the original , and just love it , i keep my phone in my jean pockets a lot to , but not skintight geans , just normal , and can never feel it. if you give it a try i almost cirtian you will never go back.
also can be removed with no damage to back of phone or case as it uses 3m adhesive double sided tape to attach .
While its still listed as "under development," I've had their cases on my TB, S3, Note II and as soon as their completed my S5.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.seidioonline.com/samsung-galaxy-s5-convert-case-holster-black-p/bd4-hkr4ssgs5.htm
Kinda $$, but IMO, well worth it.
ex-28 said:
have a peek at the youtube videos on the flygrip , there very slim and sturdy i just got my flygrip gravity new style then the original , and just love it , i keep my phone in my jean pockets a lot to , but not skintight geans , just normal , and can never feel it. if you give it a try i almost cirtian you will never go back.
also can be removed with no damage to back of phone or case as it uses 3m adhesive double sided tape to attach .
Click to expand...
Click to collapse
It looks like an awesome product, but I have never even spent that much on a case, let alone a kickstand. $30 is pretty steep. I wonder if they ever go on sale.
adrockr said:
It looks like an awesome product, but I have never even spent that much on a case, let alone a kickstand. $30 is pretty steep. I wonder if they ever go on sale.
Click to expand...
Click to collapse
I hear you on that oen , it costs me 30 buck for it and 13 to ship it to Canada , I think free or discount shipping code in the us is bbking77 might give a slight or free discount on shipping.
CZ Eddie said:
I haven't seen a decent case with a durable kickstand that is stable in both horizontal and vertical positions since the S3 was released (Qmadix case).
So, for my S4 I just found the coolest case and then cut a hole on the back and DIY'd my favorite kickstand (Qmadix) into it.
Unfortunately, that company no longer makes the kickstand case for any phones.
But a nice alternative is to get a stick-on kickstand.
http://www.mouseglider.com/pro1445718.html
Put it on any case.
Click to expand...
Click to collapse
I have been thinking about this, and until a less sucky kickstand case becomes available, I have decided to revise the question:
What is the best kickstand case under 10 bucks that I can cannibalize to remove the kickstand (to then epoxy it to my favorite S5 non-kick case)?
Provisions:
1. All I need is the kickstand, it can be for any phone on the market. 10 year old phones even.
2. Must be able to stand vertical, and horizonal.
3. Cheap.
4. Preferably black.
Another way to phrase it might be...What is the best vertical kickstand case you have ever owned?
One vote from CZ Eddie on the q-madix case.
Anyone else?
adrockr said:
One vote from CZ Eddie on the q-madix case.
Click to expand...
Click to collapse
I ended up going with a Note 3. And I'm going to do the same DIY mod again because it worked so well last time. But this time, I'm going to take my time and make it have a NICER looking cutout. But here's my DIY thread if you want to check out how I did it.
http://forum.xda-developers.com/showthread.php?t=2488355
This time, I'm going to cut out the hole smaller than it needs to be. And then use a file to gently file the hole out to the correct dimensions. This should make it look more "stock" 'ish.
I recommend the Galaxy S3 Qmadix Metallix kickstand case for sourcing the kickstand part from. You can find it for $10 shipped if you look around.
---------- Post added at 12:28 PM ---------- Previous post was at 12:24 PM ----------
Btw, in the meantime I did use the stick-on kickstand. It works GREAT, even on my Note 3.
The only problem is it creates a bulge on the back of the case that makes it so the phone doesn't sit flat in my car and home docks. And when opened, the hole under the kickstand is just a bit too small for my normal sized fingers to go through, unlike the Qmadix kickstand which my fingers fit inside the loop great.

Best cases for OnePlus 6

MOD EDIT: LINK REMOVED
Per the forum rules, posing affiliate links is not allowed on XDA.
I think the included one is better than any of these 3, maybe I'll get the number 2 but from reviews of the same model but for other phones it may not have raised lips to protect the screen when facing down or from a drop but I'm hesitating between the included one or the karbon case (made by evutec)
I'm leaning towards the orzly fusion bumper. Had it for my oneplus 5, really good grip on it plus the raised lip on the front.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
tcn01 said:
I'm leaning towards the orzly fusion bumper. Had it for my oneplus 5, really good grip on it plus the raised lip on the front.
Click to expand...
Click to collapse
Pre-ordered. Gonna ship in June only. Will do a quick review here once it's here.
Sent from my HTC U11 using Tapatalk
I will of course be checking as many accessories and screen protectors out as I can and posting videos, but I'd lean towards the Orzly at the moment also as its a true favourite of mine.
I've had great experiences with the Suensan TPU cases for both my Pixel XL and Pixel 2 XL. So I went ahead and ordered the same case for my OnePlus 6 this morning:
https://www.amazon.com/gp/product/B07BZLB6N7/ref=od_aui_detailpages00?ie=UTF8&psc=1
At $7.98 with free 2 day shipping, it's an excellent option that I highly recommend.
I also ordered the Nylon bumper case with my phone this morning since the early reviewers all seem to absolutely love the nylon bumper case.
tcn01 said:
I'm leaning towards the orzly fusion bumper. Had it for my oneplus 5, really good grip on it plus the raised lip on the front.
Click to expand...
Click to collapse
Yeah, theirs are really good usually. It's what I had aswell last time. I was going to go for their wallet case again (as I like having the stand for watching videos),. but then I saw they had a really cheap multipack with all of them, where they've even thrown in a whole bunch of other cool stuff like Type C cables and car chargers etc. (works out cheaper than just two cases for all that lot, so I'm bagging this before they put the prices back up)
https://www.amazon.com/dp/B07D7C4H7L/&oneplus+6+accessories
I really want a Nillkin Sparkle OnePlus 6 flip case. Plain. Minimalist. It just makes a largish phone easier to hold and protected. Don't need a kickstand (added thickness). Don't need windows. Don't need a card holder (added thickness). Drop protection = about zero, but it is what I have had on 5 or 6 phones and works great.
I've had the best experiences with UAG cases. They don't seem to have one for the 6 yet, but they made one for the 5T so I'm crossing my fingers.
Edit: UAG said on twitter they have no current plans for a 6 case. Blah.
AnabolicAndroidz said:
Yeah, theirs are really good usually. It's what I had aswell last time. I was going to go for their wallet case again (as I like having the stand for watching videos),. but then I saw they had a really cheap multipack with all of them, where they've even thrown in a whole bunch of other cool stuff like Type C cables and car chargers etc. (works out cheaper than just two cases for all that lot, so I'm bagging this before they put the prices back up)
https://www.amazon.com/dp/B07D7C4H7L/&oneplus+6+accessories
Click to expand...
Click to collapse
one should never get wallet case for safety reason. My oneplus 3 was just stolen when I was on a holiday trip. I cannot imagine what would have happened if my credit card or ID card was attached to my phone.
sn0warmy said:
I've had great experiences with the Suensan TPU cases for both my Pixel XL and Pixel 2 XL. So I went ahead and ordered the same case for my OnePlus 6 this morning:
https://www.amazon.com/gp/product/B07BZLB6N7/ref=od_aui_detailpages00?ie=UTF8&psc=1
At $7.98 with free 2 day shipping, it's an excellent option that I highly recommend.
I also ordered the Nylon bumper case with my phone this morning since the early reviewers all seem to absolutely love the nylon bumper case.
Click to expand...
Click to collapse
good looking out that suensan case looks like the spigen rugged tpu case/.
link for nylon bumper?
I bought this one:
https://www.mobilefun.com/olixar-armourdillo-oneplus-6-protective-case-black-67638
I got the nylon and of course there is the one that comes with it. So those are enough options for me.
I just returned the second one. It looks alright but the grip is quite loose, the tpu case that came with the phone has a much better grip. I am going to order the first one now hopefully it will have a proper grip.
Anyone knows when Nillkin will release its frosted shield case?
Did any of you try the flexicase from Orzly? I see it's quite cheap on Amazon and was wondering if it's worth getting it.
Deacon-Frost said:
Anyone knows when Nillkin will release its frosted shield case?
Click to expand...
Click to collapse
https://www.aliexpress.com/item/One...neplus-3-Oneplus3-A3000-with/32687032486.html
I haven't ordered it yet.
Anyone know a "big" difference between the Kevlar and the nylon bumper case?
For my OPT I had the OtterBox, which I loved, but this one was pretty bulky... I now have the S8 with the silicon case... not that bad, but not that good protection of course...
For the OP6 I do not want the OtterBox, since it's again very bulky and has these connection protectors, which I don't like.
So I balance between the orignal Nylon or Kavlar... Nylon looks great but seems a bit bulkier than the Kevlar, right?
What I also loved from the OtterBox was this smal lip around the front, so you could lay the phone upside down without scratching the screen, does the mentioned original cases have such a lip as well?
Any thoughts? Guesses?
tcn01 said:
I'm leaning towards the orzly fusion bumper. Had it for my oneplus 5, really good grip on it plus the raised lip on the front.
Click to expand...
Click to collapse
huawuban said:
one should never get wallet case for safety reason. My oneplus 3 was just stolen when I was on a holiday trip. I cannot imagine what would have happened if my credit card or ID card was attached to my phone.
Click to expand...
Click to collapse
I never actually put my credit cards in them. (the ability to put cards in them, for me, is a totally redundant feature). I know there will be meany that don't agree and actually like that part, but I agree with you that the card feature is just not for me either.
The reason why I prefer the wallet case style though and always use them is for two reasons:
Firstly, I like that the screen is completely covered when not in use, so never gets scratched up in my pocket. (that can be solved by a decent tempered glass screen protector though), but not letting the screen get scratched in the first place stops you having to replace the screen protectors so often. (so I actually use glass screen protectors aswell as this case, which gives me the best of both worlds, and has always served me well)
The even bigger reason why I prefer the wallet case styles is to do with the built in stand. Watching movies in bed, or on a train, (or anywhere for that matter), I just open the case, and I've got as fully supported stand which I can position at pretty much any angle, without having to bring anything else with me to do it. Then when I've finished, I just fold it away, and it's all self contained, so is automatically always with me wherever I have my phone.
But I agree with you, putting cards in the case is not something I find that useful. (aside from how much it bulks the case out, I worry about things like if the magnetic strip of the cards would get wiped by the magnets on the lid). So my cards I always carry in my actual wallet (not in a wallet phone case), and the the wallet case is purely for all the useful things it does for my phone..
AnabolicAndroidz said:
I never actually put my credit cards in them. (the ability to put cards in them, for me, is a totally redundant feature). I know there will be meany that don't agree and actually like that part, but I agree with you that the card feature is just not for me either.
The reason why I prefer the wallet case style though and always use them is for two reasons:
Firstly, I like that the screen is completely covered when not in use, so never gets scratched up in my pocket. (that can be solved by a decent tempered glass screen protector though), but not letting the screen get scratched in the first place stops you having to replace the screen protectors so often. (so I actually use glass screen protectors aswell as this case, which gives me the best of both worlds, and has always served me well)
The even bigger reason why I prefer the wallet case styles is to do with the built in stand. Watching movies in bed, or on a train, (or anywhere for that matter), I just open the case, and I've got as fully supported stand which I can position at pretty much any angle, without having to bring anything else with me to do it. Then when I've finished, I just fold it away, and it's all self contained, so is automatically always with me wherever I have my phone.
But I agree with you, putting cards in the case is not something I find that useful. (aside from how much it bulks the case out, I worry about things like if the magnetic strip of the cards would get wiped by the magnets on the lid). So my cards I always carry in my actual wallet (not in a wallet phone case), and the the wallet case is purely for all the useful things it does for my phone..
Click to expand...
Click to collapse
I agree that not putting a card in for safety reasons. I never have, never do. For safety reasons and the well though out response above. The Nillkin Sparkle doesn't even have a card slot. Smart.
Some people don't use lockscreens or use find me applications, even during travel. …
Sent from my Xiaomi MI MIX using XDA Labs

Categories

Resources