Database Info

[Q]

First off I am sorry for posting this, however I DID use the search tool. I recently got a USA spec Wifi only Xoom. It came with 4.1.1 preinstalled. I have sucessfully unlocked the bootloader.
My problem is this. I cannot gain root or even get CWM installed. I have tried oneclick, i have tried cmd prompt. I have followed every guide I can find to a "T". Is there something missing, is it an issue with Jellybean being preinstalled?

Use http://forum.xda-developers.com/showthread.php?t=1468298 to get CWM installed (and when you reboot from fastboot flashing the recovery image, and this is very important, DO NOT LET IT FULLY REBOOT INTO THE OS. You have to get into recovery in the next boot or the OS will just overwrite it with the stock recovery and you will just have to go back into fastboot and flash the recovery again.
http://forum.xda-developers.com/showpost.php?p=30464067&postcount=408 has the root once you get CWM installed.

airesch said:
Use http://forum.xda-developers.com/showthread.php?t=1468298 to get CWM installed (and when you reboot from fastboot flashing the recovery image, and this is very important, DO NOT LET IT FULLY REBOOT INTO THE OS. You have to get into recovery in the next boot or the OS will just overwrite it with the stock recovery and you will just have to go back into fastboot and flash the recovery again.
http://forum.xda-developers.com/showpost.php?p=30464067&postcount=408 has the root once you get CWM installed.
Click to expand...
Click to collapse
Thanks for the reply, however this is one of the utilities I have tried,..
Here is a bit more info.
I am running windows 7 64bit if it makes a difference. Whenever I get the device into fastboot and try to flash anything, it just hangs at the original fastboot screen. I have let it sit there from 3 hours and eventually I have to reboot it. The Lord AIO Tool you linked just gives me and error message that the device is not a 2.2/2.3 device. If I were at home I would take a screenshot.
Could my bootloader be corrupt? The device still boots up and runs jellybean fine, but I am not loving the stock experience thus far...
Thanks again for the links!

Actually sounds like your drivers aren't right. I will look them up and link them when I get home
Try installing the driver from http://developer.motorola.com/tools/usb_drivers/, rebooting your pc, and try fastboot again. If that still doesn't work, then there may be something wrong with your pc setup OR your Xoom, not sure at that point.
Sent from my SPH-D710 using xda premium

Thanks a million, I am going to try it fresh on my pc at work. Thanks!

That did the trick THANKS A BUNCH!!!!!

[Q] RAZR HD XT 925 Boots into recovery by default

So, today I trade my HTC One for a RAZR XT925, $350, and a water proof 32GB Sandisk ultra sd card on Kijiji. I thought it was kinda weird to get all of this stuff, but it seemed fine at the time. Afterwards however, I found out that every time you turn off or reboot the phone, it tried to go into recovery mode or something with the android guy and a bar at the bottom in a loop and always factory reset the phone, so no matter what, every time you turned it off, it'd reset it. After hours and hours of work, I have the bootloader unlocked, rooted, CWM installed, and Cynogenmod also installed. It no longer factory resets it (I think, but i sent a text to a random number and when I rebooted it was still there), however, everytime i power off and power on, it goes into recovery mode. This is very annoying and will make it very hard to sell again, but if I can fix this last thing, I'll have a solid phone until the waterproof S4 comes out as well as having made like $100.
So basically, I need to know what to do to make it boot into the rom by default and not the recovery. Also, I searched it up and someone else had a problem where they kept booting into AP fastboot mode I think, I tried that line, it said successful, but it didnt work. For me, it's booting into the recovery by default.

Does it boot into stock recovery?
Sent from my Galaxy Nexus using xda premium

recovery
jmcdonald58 said:
Does it boot into stock recovery?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I root it, unlocked the boot loader, flashed cwm recovery, and installed CyanogenMod. Now it boots into cwm recovery by default and if I click reboot system now, it just boots back into cwm. Only way to get to the system is to go to the boot menu by pressing all three buttons and selecting boot normally.
Stock recovery is gone. Cwm asked to replace it so that the phone doesn't reinstall it on reboot. Cwm doesn't, but when the phone booted it stock recovery, it used to get wiped.

roguezz said:
I root it, unlocked the boot loader, flashed cwm recovery, and installed CyanogenMod. Now it boots into cwm recovery by default and if I click reboot system now, it just boots back into cwm. Only way to get to the system is to go to the boot menu by pressing all three buttons and selecting boot normally.
Stock recovery is gone. Cwm asked to replace it so that the phone doesn't reinstall it on reboot. Cwm doesn't, but when the phone booted it stock recovery, it used to get wiped.
Click to expand...
Click to collapse
Strange If it was me I would try a toolkit and redo the whole process something went wrong somewhere wish I could help Good Luck

recovery
jmcdonald58 said:
Strange If it was me I would try a toolkit and redo the whole process something went wrong somewhere wish I could help Good Luck
Click to expand...
Click to collapse
No the problem was in stock. When I got it it wasn't rooted or anything, rooting helped fix the problem partially by not making it wipe every time I boot it. Now the only problem is that whenever I boot it up after a shut down or restart, it boots into recovery mode instead of the ROM.

roguezz said:
No the problem was in stock. When I got it it wasn't rooted or anything, rooting helped fix the problem partially by not making it wipe every time I boot it. Now the only problem is that whenever I boot it up after a shut down or restart, it boots into recovery mode instead of the ROM.
Click to expand...
Click to collapse
did you ever find a solution for this? I just bought a used phone and am facing the same problem - I can't even boot into recovery, it will just start bootlooping again. Only thing that seems to be working is fastbood mode. (or regular reboot, but then everything is wiped every time)

coldtech said:
did you ever find a solution for this? I just bought a used phone and am facing the same problem - I can't even boot into recovery, it will just start bootlooping again. Only thing that seems to be working is fastbood mode. (or regular reboot, but then everything is wiped every time)
Click to expand...
Click to collapse
Fastboot the stock ROM. That should return the phone to it's bone stock condition.
Sent from my DROID RAZR HD using Tapatalk 4

mentose457 said:
Fastboot the stock ROM. That should return the phone to it's bone stock condition.
Sent from my DROID RAZR HD using Tapatalk 4
Click to expand...
Click to collapse
trying right now. RSDLite is giving me an "unknown fastboot command getvar" error...still trying to figure out why.

coldtech said:
trying right now. RSDLite is giving me an "unknown fastboot command getvar" error...still trying to figure out why.
Click to expand...
Click to collapse
I wouldnt mess with RSDLite. Google gave us fastboot for a reason.

mentose457 said:
I wouldnt mess with RSDLite. Google gave us fastboot for a reason.
Click to expand...
Click to collapse
is there an alternative to flash the stock ROM on a locked device?

coldtech said:
is there an alternative to flash the stock ROM on a locked device?
Click to expand...
Click to collapse
Use this utility: http://forum.xda-developers.com/showthread.php?t=2241788
Use the 'Lite' version as it includes the stock rom.

mentose457 said:
Use this utility: http://forum.xda-developers.com/showthread.php?t=2241788
Use the 'Lite' version as it includes the stock rom.
Click to expand...
Click to collapse
Thanks for the hint, will give it a try. RSDLite just completed flashing, but the odd behaviour of the phone is still the same. Guess I might just have a broken phone... :/

mentose457 said:
Use this utility: http://forum.xda-developers.com/showthread.php?t=2241788
Use the 'Lite' version as it includes the stock rom.
Click to expand...
Click to collapse
After a few hours, I (somehow) ended up being able to enter recovery. On the downside though, now it always goes automatically into fastboot, because everything seems to be screwed up. I even got CWM installed though (unlocked the device because I didn't know what else to do).
Now every time it goes into fastboot, the reason given is: "sticky bit fastboot"
Any ideas left?
Oh btw, I have a german phone, in case that matters somehow. I can't flash in any fastboot way anymore, now I always get some message about a downgraded version. Of course details can be supplied if needed.
edit: was now able to flash CM, no idea what I did so that it didn't give me errors anymore. It still goes into fastboot by default on every reboot though, I always need to select "reboot device" manually every time.

coldtech said:
After a few hours, I (somehow) ended up being able to enter recovery. On the downside though, now it always goes automatically into fastboot, because everything seems to be screwed up. I even got CWM installed though (unlocked the device because I didn't know what else to do).
Now every time it goes into fastboot, the reason given is: "sticky bit fastboot"
Any ideas left?
Oh btw, I have a german phone, in case that matters somehow. I can't flash in any fastboot way anymore, now I always get some message about a downgraded version. Of course details can be supplied if needed.
edit: was now able to flash CM, no idea what I did so that it didn't give me errors anymore. It still goes into fastboot by default on every reboot though, I always need to select "reboot device" manually every time.
Click to expand...
Click to collapse
Sounds like you are able to use the phone. That’s good.
The error is saying it can’t downgrade the trust zone (tz) right? That is normal for a phone with an unlocked bootloader. You can simply ignore that.
The sticky bit fastboot problem looks like it can be fixed by issuing this command while in fastboot mode: fastboot oem fb_mode_clear

mentose457 said:
Sounds like you are able to use the phone. That’s good.
The error is saying it can’t downgrade the trust zone (tz) right? That is normal for a phone with an unlocked bootloader. You can simply ignore that.
The sticky bit fastboot problem looks like it can be fixed by issuing this command while in fastboot mode: fastboot oem fb_mode_clear
Click to expand...
Click to collapse
the fb_mode_clear was the culprit, thanks a lot!
and the error says: "downgraded security version. update gpt_main version failed. preflash validation failed for GPT" - which is still keeping me from flashing stuff via fastboot.
since I can't fastboot flash at the moment: do you happen to know where I can get the german modem image so that I can flash it using CWM? I think through all the flashing and trying I have a corrupt or wrong modem file (probably the US version). I can not log into the carrier network right now. it asks me for my SIM PIN and unlocks the SIM, but that's it. so I can't make phone calls or anything right now.

[Q] TF700 bricked...?

Well, I was trying to install CM11 and did something wrong... most likely I was flashing with TWRP instead of clockworkmod recovery.
Moreover, shame on me, I did a "wipe data" or similar thing while in the confusion and now I have just the message "the device is unlocked" when booting - no access to TWRP when holding power+volume down, nothing else... am I in a dead-end? any suggestion?
Thanks in advance!

Fastboot
pippolino123 said:
Well, I was trying to install CM11 and did something wrong... most likely I was flashing with TWRP instead of clockworkmod recovery.
Moreover, shame on me, I did a "wipe data" or similar thing while in the confusion and now I have just the message "the device is unlocked" when booting - no access to TWRP when holding power+volume down, nothing else... am I in a dead-end? any suggestion?
Thanks in advance!
Click to expand...
Click to collapse
Does it go into fastboot after you see the unlock device, do you get the three icons you would normally see??

lj50036 said:
Does it go into fastboot after you see the unlock device, do you get the three icons you would normally see??
Click to expand...
Click to collapse
unfortunately not... I don't see the three icons it is stuck with the ASUS logo

nvflash
pippolino123 said:
unfortunately not... I don't see the three icons it is stuck with the ASUS logo
Click to expand...
Click to collapse
Do you have your Blob files from enabling nvflash??

lj50036 said:
Do you have your Blob files from enabling nvflash??
Click to expand...
Click to collapse
sorry don't understand what you mean. Can you please clarify. ..?

nvflash
pippolino123 said:
sorry don't understand what you mean. Can you please clarify. ..?
Click to expand...
Click to collapse
Sorry to say if you don't know what nvflash is or blobs and you don't have fastboot access.. time to send it to asus
You needed to do this first!!!!!
https://www.androidroot.mobi/nvflash-for-tegra3-transformer-tf700t/

lj50036 said:
Sorry to say if you don't know what nvflash is or blobs and you don't have fastboot access.. time to send it to asus
You needed to do this first!!!!!
https://www.androidroot.mobi/nvflash-for-tegra3-transformer-tf700t/
Click to expand...
Click to collapse
yes, I think you are right... didn't know about the nvflash stuff. Thanks either way for your help!

Well if you do send it in... When you get it back look me up... We will get your blobs off it so you can't brick it!!!!!
Sent from my One using XDA Premium 4 mobile app

lj50036 said:
Well if you do send it in... When you get it back look me up... We will get your blobs off it so you can't brick it!!!!!
Sent from my One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
sure I will... thanks again and happy holidays

So since I feel like I have a complex problem that I can't seem to search for, I'm piggy backing this thread. It's been a year since I rooted this tablet, and I went on deployment with it. Worst ROM ever, couldn't get YouTube, WiFi was sketchy at best so I came back and it even had the OTA updater to update to a newer version, well that wouldn't load at all.
So I was in the process of trying to kill this crap ROM and upload I think CYA.. eh it's not the issue. So the first thing it asked me to do was this TWRP (which is new to me from a year ago) and I installed v2.5.0.0. When the tablet was working, that program seemed to work just fine, but when I rebooted in to RCK, it's so skewed and off center that I can't see half the screen. So when I tried to update to this new ROM, I kept getting download faults, so I figured I was stuck with this crap ROM because basically I quit trying. Well I tried to restart my tablet and this TWRP thing came up and asked if I wanted to run this (NEWVERSION).zip (I don't want to call out the development team, I'm sure their most recent update is much better) but basically it was the new version of the ROM I was running, so I let TWRP (from the loaded up tablet) to "install new zip" so I of course wiped data, cache and dalvik (I didn't save anything to this tablet, nothing to lose)
Well now, I'm stuck in the bricked mode of ASUS screen. If I hold down volume and power, I get RCK/Android/Wipe Data. I ever get the computer asking me to install new drivers, but of course it won't recognize the TF700 as a disk.
Any suggestions on how to get this thing back?

First the good news:
The page with the three icons is the bootloader menu which means you should have fastboot access to your tablet from your computer.
You can use fastboot to flash a new recovery (TWRP) and once that is installed you can flash the new rom.
So this can be fixed relatively easy, but you have to do some reading before attempting it. Done correctly this is a safe procedure. Done without understanding what you are doing could leave you with a hard brick - right now you're probably just soft bricked.
s14owner95 said:
So I was in the process of trying to kill this crap ROM and upload I think CYA.. eh it's not the issue. So the first thing it asked me to do was this TWRP (which is new to me from a year ago) and I installed v2.5.0.0. When the tablet was working, that program seemed to work just fine, but when I rebooted in to RCK, it's so skewed and off center that I can't see half the screen.
Click to expand...
Click to collapse
I am not sure what happened here. I have used TWRP since version 2.3.x and never had the problem you describe. I suspect you installed a version for a different device - not the one specific for the TF700.
Well I tried to restart my tablet and this TWRP thing came up and asked if I wanted to run this (NEWVERSION).zip (I don't want to call out the development team, I'm sure their most recent update is much better) but basically it was the new version of the ROM I was running, so I let TWRP (from the loaded up tablet) to "install new zip" so I of course wiped data, cache and dalvik.
Click to expand...
Click to collapse
Are you sure you had TWRP installed???
If I understand this correctly, you booted the tablet normally and got a notification to upgrade the STOCK rom to a newer STOCK version? TWRP would not do that - it just doesn't have the functionality to recognize a newer firmware version.
If you say you "let TWRP from the loaded up tablet to install new zip" - do you mean you were booted into Android? You were running the system? That would clinch it: Whatever you were using (and I am afraid it was ROMToolbox or some such) - it was not TWRP. TWRP is your custom recovery. You have to boot into it to use it.
Well now, I'm stuck in the bricked mode of ASUS screen. If I hold down volume and power, I get RCK/Android/Wipe Data. I ever get the computer asking me to install new drivers, but of course it won't recognize the TF700 as a disk.
Any suggestions on how to get this thing back?
Click to expand...
Click to collapse
Question: Did you unlock the tablet? Did you use the Asus Unlock Tool to unlock the bootloader or did you just root it? When you booted it up: Do you remember seeing "This device is unlocked" in tiny script in the upper left?
I assumed you were unlocked, but writing this post I developed doubt. I suspect you just rooted, downloaded ROMToolbox and tried to flash a new rom through it.
That does not work on this device. You have to unlock the bootloader, install a custom recovery and then you can flash a custom rom. Do not use ROMToolbox on this device!
So before I even attempt to explain the fastboot procedure, I have to know if you unlocked your TF700.
If not, you can't use fastboot.
Your last option then would be to pray that the stock recovery still works and flash the stock firmware.

berndblb said:
First the good news:
I am not sure what happened here. I have used TWRP since version 2.3.x and never had the problem you describe. I suspect you installed a version for a different device - not the one specific for the TF700.
Click to expand...
Click to collapse
That's a good possibility since I was trying to locate what I wanted via my phone, my laptop crashed last week, which is really the only reason I busted out this tablet, I borrowed a computer to try to get this fixed
berndblb said:
Are you sure you had TWRP installed???
If I understand this correctly, you booted the tablet normally and got a notification to upgrade the STOCK rom to a newer STOCK version? TWRP would not do that - it just doesn't have the functionality to recognize a newer firmware version.
If you say you "let TWRP from the loaded up tablet to install new zip" - do you mean you were booted into Android? You were running the system? That would clinch it: Whatever you were using (and I am afraid it was ROMToolbox or some such) - it was not TWRP. TWRP is your custom recovery. You have to boot into it to use it.
Click to expand...
Click to collapse
TWRP didn't ask me about the update, the OTA Updater built into the ROM that I installed at the beginning of the year did. After I unsuccessfully tried to install the TWRP and CYNA ROM, I rebooted and the OTA came up saying a newer version was available, once it went to reboot into recovery, TWRP came up
berndblb said:
Question: Did you unlock the tablet? Did you use the Asus Unlock Tool to unlock the bootloader or did you just root it? When you booted it up: Do you remember seeing "This device is unlocked" in tiny script in the upper left?
I assumed you were unlocked, but writing this post I developed doubt. I suspect you just rooted, downloaded ROMToolbox and tried to flash a new rom through it.
That does not work on this device. You have unlock the bootloader, install a custom recovery and then you can flash a custom rom. Do not use ROMToolbox on this device!
So before I even attempt to explain the fastboot procedure, I have to know if you unlocked your TF700.
If not, you can't use fastboot.
Your last option then would be to pray that the stock recovery still works and flash the stock firmware.
Click to expand...
Click to collapse
I know I went to the ASUS website and unlocked the tablet, it does say "This device is unlocked" at the top left once I turn on the computer.. I'm going to try to screen shot from my phone and update what TWRP looks like on the tablet in recovery

Hope this worked

s14owner95 said:
That's a good possibility since I was trying to locate what I wanted via my phone, my laptop crashed last week, which is really the only reason I busted out this tablet, I borrowed a computer to try to get this fixed
TWRP didn't ask me about the update, the OTA Updater built into the ROM that I installed at the beginning of the year did. After I unsuccessfully tried to install the TWRP and CYNA ROM, I rebooted and the OTA came up saying a newer version was available, once it went to reboot into recovery, TWRP came up
I know I went to the ASUS website and unlocked the tablet, it does say "This device is unlocked" at the top left once I turn on the computer.. I'm going to try to screen shot from my phone and update what TWRP looks like on the tablet in recovery
Click to expand...
Click to collapse
Never mind! You don't want to boot into an incompatible recovery if you can help it!
But that's good new!
Check out this post I wrote a little while back and let me know if you have questions:
http://forums.androidcentral.com/as...6920-tutorial-flashing-custom-rom-tf700t.html
Edit: What I don't understand is how you got a notification for an OTA update.... You shouldn't if you are unlocked....
What rom are you running???

berndblb said:
Never mind! You don't want to boot into an incompatible recovery if you can help it!
But that's good new!
Check out this post I wrote a little while back and let me know if you have questions:
http://forums.androidcentral.com/as...6920-tutorial-flashing-custom-rom-tf700t.html
Edit: What I don't understand is how you got a notification for an OTA update.... You shouldn't if you are unlocked....
What rom are you running???
Click to expand...
Click to collapse
OK, so my computer never actually installs the drivers for the TF700, but ADB worked and I flashed TWRP 2.6.3.2 because it was the newest version, everything went through, it says OKAY and finished, it allowed me to reboot, but I still get the frozen ASUS screen and if I reboot into recovery, I still have that screwed up screen that I posted a few screen shots back. I need to download another ROM.. I have this other one on here, but I can't push the zip, I forgot how. I'm researching..
Thank you so much for the help so far
---------- Post added at 02:27 AM ---------- Previous post was at 01:57 AM ----------
berndblb said:
Never mind! You don't want to boot into an incompatible recovery if you can help it!
But that's good new!
Check out this post I wrote a little while back and let me know if you have questions:
http://forums.androidcentral.com/as...6920-tutorial-flashing-custom-rom-tf700t.html
Edit: What I don't understand is how you got a notification for an OTA update.... You shouldn't if you are unlocked....
What rom are you running???
Click to expand...
Click to collapse
The ROM I was running had an "OTA Updater" which updated the ROM I was using, I don't want to blast them, but it's just not a good ROM.
So now, I was able to "fastboot devices" and it says 015d25681a481802 fastboot" It let me type the command "fastboot -i 0x05B0 flas recovery twrp.blob
But now I can't flash anything else. Like I said, I can't get the drivers to fully install so I can't mount the tablet like an external drive, I can't even get it passed the "ASUS" title page. Is there a way I can push this 4.2.1 CROMi ROM through fastboot?

s14owner95 said:
OK, so my computer never actually installs the drivers for the TF700, but ADB worked and I flashed TWRP 2.6.3.2 because it was the newest version, everything went through, it says OKAY and finished, it allowed me to reboot, but I still get the frozen ASUS screen and if I reboot into recovery, I still have that screwed up screen that I posted a few screen shots back. I need to download another ROM.. I have this other one on here, but I can't push the zip, I forgot how. I'm researching..
Thank you so much for the help so far
Click to expand...
Click to collapse
Mmmhh, your tablet may need a little deeper cleaning. Check out buster99's post (#12). His method has helped dozens recover from worse than you have right now.
http://forum.xda-developers.com/showthread.php?t=2179759&page=2
His instructions are for the TF300. naturally you want to flash the blob for the TF700. That would get you back to a healthy stock system. Then you can again flash TWRP and through it a custom rom.
Good luck!
---------- Post added at 05:36 PM ---------- Previous post was at 05:28 PM ----------
s14owner95 said:
OK, so my computer never actually installs the drivers for the TF700, but ADB worked and I flashed TWRP 2.6.3.2 because it was the newest version, everything went through, it says OKAY and finished, it allowed me to reboot, but I still get the frozen ASUS screen and if I reboot into recovery, I still have that screwed up screen that I posted a few screen shots back. I need to download another ROM.. I have this other one on here, but I can't push the zip, I forgot how. I'm researching..
Thank you so much for the help so far
---------- Post added at 02:27 AM ---------- Previous post was at 01:57 AM ----------
The ROM I was running had an "OTA Updater" which updated the ROM I was using, I don't want to blast them, but it's just not a good ROM.
So now, I was able to "fastboot devices" and it says 015d25681a481802 fastboot" It let me type the command "fastboot -i 0x05B0 flas recovery twrp.blob
But now I can't flash anything else. Like I said, I can't get the drivers to fully install so I can't mount the tablet like an external drive, I can't even get it passed the "ASUS" title page. Is there a way I can push this 4.2.1 CROMi ROM through fastboot?
Click to expand...
Click to collapse
Are you saying the twrp flash went ok?
You don't flash the rom in fastboot. You boot back into recovery, choose "Install" and select the CROMi-X zip you downloaded.
But before you do that I would seriously suggest you format your data partition. That means you have to have the downlaoded rom zip on your external card (otherwise you will erase it with the format).
So boot into TWRP, choose Wipe > Advanced > Format data
Then go back to TWRP Home, choose Install and navigate to the CromiX zip. Make sure the box "verify zip signature" is checked and flash the rom.
Do this only if you have a working recovery!!! Do not attempt with your busted one!!
You can only access the tablet in MTP (as an external drive) if your system is working. It's not - yet.

OK, so here's the lastest for me. I tried to "adb push ROM.zip ROM.zip/sdcard/" - error: device not found. I also tried "adb sideload" -error: device not found.
Also now, instead of the computer asking me to install drivers for my new device, it's registered as a "android bootloader interface" I tried to download the ASUS android USB drivers and update them, but Windows thinks my drivers are up to date.

s14owner95 said:
OK, so here's the lastest for me. I tried to "adb push ROM.zip ROM.zip/sdcard/" - error: device not found. I also tried "adb sideload" -error: device not found.
Also now, instead of the computer asking me to install drivers for my new device, it's registered as a "android bootloader interface" I tried to download the ASUS android USB drivers and update them, but Windows thinks my drivers are up to date.
Click to expand...
Click to collapse
To use ADB you have to be in your recovery or the Android system needs to run.
If you have a working recovery back - why do you want to mess with ADB unless you are familiar with it? You are treading on thin ice doing stuff without really understanding what you are doing! What's the rush?

The problem is that I don't have a working recovery back. i still have that screwed up screen that only shows a portion of TWRP. It let me push that recovery to it, but I can't see enough of the recovery to actually flash something to it..
I tried to download the drivers and push those manually, but windows doesn't recognize it

s14owner95 said:
The problem is that I don't have a working recovery back. i still have that screwed up screen that only shows a portion of TWRP. It let me push that recovery to it, but I can't see enough of the recovery to actually flash something to it..
I tried to download the drivers and push those manually, but windows doesn't recognize it
Click to expand...
Click to collapse
Your drivers are working. You need different sets of drivers for different modes: fastboot drivers, adb drivers, mtp drivers.
Your tablet shows up as a bootloader interface because it is in fastboot mode - ergo the fastboot drivers are working.
You HAVE to get a working recovery onto the tablet. It will NOT work without a recovery. To push a rom zip to the tablet is useless - the only thing working on your tablet is fastboot mode.
If the recovery flash fails, try buster99's method. That should clean all the crud off your partitions.
But you need to have the Asus firmware blob file for this! You cannot do this with any rom zip!!
Edit: You did push the correct recovery this time, did you?

[Q] Need help recovering my S3 -- TWRP ADB Sideload not working

I pulled a boneheaded move and ended up formatting my phone from within the TWRP menu. Now the stock operating system is gone.
I wanted to put on one of the Gummy Nightly builds, but I'm new to TWRP and selected the wrong options while wiping.
So now I have the Gummy ROM on my PC, the phone is connected to my PC and in TWRP (in the advanced adb sideload feature), but adb will not recognize my phone.
When I check device manager, SAMSUNG_Android_SCH-I535 is there, but with a yellow "cauton" symbol. When I look at properties, it tells me that "The drivers for this device are not installed (Code 28).
I went out to the Samsung page and got the exe to unpack drivers on my machine... I've tried "update driver" and pointing to the root of the directory containing the Samsung drivers, but my PC claims none of them are applicable.
So what I'm looking for here is:
(1) How do I get this ROM on my phone so that I can install the zip and have a working OS again?
(2) Assuming that using the ADB Sideload feature of TWRP is my best option, how do I get the device drivers for my galaxy s3 installed to my windows 8 PC and get adb to detect it?
Thanks in advance.

Ok, so it seems to have gotten worse.
I cannot get my windows installation to recognize the phone without it being able to boot an android OS, it seems.
I had it in TWRP 2.6.0.0, but as I was trying to reboot to see if I could get into download mode (my thought being to change out TWRP for Clockwork; I seem to remember Clockwork Recovery having a "mount as USB" option which TWRP seems to lack), it tried to root the file system.
After that, the screen went black and nothing happened... the phone was unresponsive. I would remove the battery and replace it to have it vibrate once and then not respond to any key presses.
I removed the battery, SD card, and SIM card, replacing only the battery and got it to turn on and show a Samsung Galaxy SIII logo... but it's just sitting there... I'm assuming it's frozen because there's no OS to boot on the internal storage.
Please help me recover my phone!

Ok, so I've found I can still get into download mode, but not into recovery.
Recovery seems to lead to a black screen with nothing on it.
Trying to boot normally leads to the statis Samsung Galaxy SIII logo.
Can I fix my phone from the download menu?
Please help me.

Install kies and at the end of the install make sure you check install unified drivers. Then flash root66 through Odin. After that you should be good to install ROMs again.

ThePagel said:
Install kies and at the end of the install make sure you check install unified drivers. Then flash root66 through Odin. After that you should be good to install ROMs again.
Click to expand...
Click to collapse
Thanks for the reply!
Sorry, I'm a little out of date on the flashing and stuff -- I was just over in the thread where the poster thought he half softbricked his phone and was asking about 4.1.2 vs. 4.3
I see this at the top of my screen sitting here in download mode:
ODIN MODE
PRODUCT NAME: SCH-I535
CUSTOM BINARY DOWNLOAD: YES (6 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
It seems my bootloader got relocked somehow -- is this why my phone just goes to black screen when I attempt to boot into recovery -- even if I have TWRP or CWR installed? Odin claims I just pushed philz custom CWR to my PDA section, but it still won't go into recovery.
What are my options here?

You are pre 4.3 I'll help you more in the morning if no one else does first.

ThePagel said:
You are pre 4.3 I'll help you more in the morning if no one else does first.
Click to expand...
Click to collapse
Ok, thanks -- I appreciate that someone's willing to help! Googling stuff is just getting me more and more confused.
I'll stay tuned for help and turn off my phone so I don't screw things up further in the meantime.
My desired result here, I think is to have my bootloader remain unlocked (as I was under the impression it was, since I was running TWRP with rooted stock ROM), with CWR as the custom recovery software and Gummy as my current ROM.
Side note: I've noticed I don't even get a battery indicator on the main screen now when I press the home button -- is this because of whatever's causing my recovery to not work (and the potential lack of an OS)?
Thanks in advance.

corrosivefrost said:
Ok, thanks -- I appreciate that someone's willing to help! Googling stuff is just getting me more and more confused.
I'll stay tuned for help and turn off my phone so I don't screw things up further in the meantime.
My desired result here, I think is to have my bootloader remain unlocked (as I was under the impression it was, since I was running TWRP with rooted stock ROM), with CWR as the custom recovery software and Gummy as my current ROM.
Side note: I've noticed I don't even get a battery indicator on the main screen now when I press the home button -- is this because of whatever's causing my recovery to not work (and the potential lack of an OS)?
Thanks in advance.
Click to expand...
Click to collapse
Once you in download mode, can your Odin see your phone?

buhohitr said:
Once you in download mode, can your Odin see your phone?
Click to expand...
Click to collapse
I believe it can. After TWRP stopped working, I tried to replace it with CWR and the digital flash count went up (Odin showed no errors on the flash) -- recovery still won't work though, holding vol+/home/power simply gives me a black screen after I see the SAMSUNG logo with the recovery boot text in the upper left.

corrosivefrost said:
I believe it can. After TWRP stopped working, I tried to replace it with CWR and the digital flash count went up (Odin showed no errors on the flash) -- recovery still won't work though, holding vol+/home/power simply gives me a black screen after I see the SAMSUNG logo with the recovery boot text in the upper left.
Click to expand...
Click to collapse
What stock version do you have on your phone right now?

buhohitr said:
What stock version do you have on your phone right now?
Click to expand...
Click to collapse
None? :silly:
I think before this fiasco, it was running whatever version was previous to the new VZW update.
It was the fact that the new update was trying to install and failing repeatedly (because my bootloader was unlocked, I think?) that prompted me to look into finally switching to a ROM. However, my unfamiliarity with TWRP led to me formatting my phone (everything, it seems, including the SD card)... so I'm not really sure what' "on the phone right now". :\
I'm really not sure what kind of state anything is in at this point -- other than Odin seemingly working and being able to get into download mode.
Again, short version of what happened:
(1) Accidentally did a full wipe (factory reset?) in TWRP -- this wiped the ROM I was going to install with TWRP off the phone.
(2) While trying to ADB sideload from TWRP and telling TWRP to reboot, TWRP tried to install supersu.
(3) After (2), I was unable to get back into recovery mode. I got into Odin and tried to flash philz customer clockwork recovery and it seemed successful. Reboot and attempt to enter recovery still fails. Samsung logo with recovery mode text appears, but then the screen goes black.
(4) Normal boot leaves the screen stuck on the Samsung Galaxy SIII logo indefinitely.

corrosivefrost said:
None? :silly:
I think before this fiasco, it was running whatever version was previous to the new VZW update.
It was the fact that the new update was trying to install and failing repeatedly (because my bootloader was unlocked, I think?) that prompted me to look into finally switching to a ROM. However, my unfamiliarity with TWRP led to me formatting my phone (everything, it seems, including the SD card)... so I'm not really sure what' "on the phone right now". :\
Click to expand...
Click to collapse
OK, download this image and flash with Odin(you should be using Odin version 3.07) http://goo.im/devs/invisiblek/i535/stock.vzw_root66.tar This should bring your phone back from the dead.
Edit: after you have your phone up and running, download goo manager and install cwm recovery since your phone is pre rooted already.

buhohitr said:
OK, download this image and flash with Odin(you should be using Odin version 3.07) http://goo.im/devs/invisiblek/i535/stock.vzw_root66.tar This should bring your phone back from the dead.
Edit: after you have your phone up and running, download goo manager and install cwm recovery since your phone is pre rooted already.
Click to expand...
Click to collapse
Ok, that looks like some version of the stock vzw ROM with root already installed?
This is what ThePagel seemed to recommend as well before I ended up with more questions about what was going on before I did it.
What part of Odin do I flash to? PDA again, just like a custom recovery?

​
corrosivefrost said:
Ok, that looks like some version of the stock vzw ROM with root already installed?
This is what ThePagel seemed to recommend as well before I ended up with more questions about what was going on before I did it.
What part of Odin do I flash to? PDA again, just like a custom recovery?
Click to expand...
Click to collapse
Yes, it's pre rooted stock image and yes flash with PDA.

buhohitr said:
​
Yes, it's pre rooted stock image and yes flash with PDA.
Click to expand...
Click to collapse
Standard auto-reboot and f_reset_time options? nothing else necessary?

corrosivefrost said:
Standard auto-reboot and f_reset_time options? nothing else necessary?
Click to expand...
Click to collapse
Correct. When you click on PDA and select the image, give it time to showup in Odin cause the size is big.

buhohitr said:
Correct. When you click on PDA and select the image, give it time to showup in Odin cause the size is big.
Click to expand...
Click to collapse
Alright, I'll give it a shot and report back.
Thank you!

corrosivefrost said:
Alright, I'll give it a shot and report back.
Thank you!
Click to expand...
Click to collapse
If that doesn't work you'll need to flash the bootchain first. I don't have a link but I could find it if you need to use it.

ThePagel said:
If that doesn't work you'll need to flash the bootchain first. I don't have a link but I could find it if you need to use it.
Click to expand...
Click to collapse
Yes if the bootloader is still locked he needs boot chain can be found here http://forum.xda-developers.com/showthread.php?t=2046439

ThePagel said:
If that doesn't work you'll need to flash the bootchain first. I don't have a link but I could find it if you need to use it.
Click to expand...
Click to collapse
It did work! Hooray!
buhohitr said:
Yes if the bootloader is still locked he needs boot chain can be found here http://forum.xda-developers.com/showthread.php?t=2046439
Click to expand...
Click to collapse
Didn't need to go that far -- but now that I'm back up and running, signed into google play, and downloaded goo manager, can you point me in the right direction for getting it to install cwm recovery?
Thanks guys!

[Q] Help Needed: Unbrick my P500!

Hi,
I have put more than 12 hours of my time, before creating this thread. I have tried things, but still struck, so thought to post it in a new thread. Thanks for all your time.
Currently struck in,
fastboot mode started udc_start()
I tried, fastboot erase recovery -> fastboot flash recovery recovery.img -> fastboot reboot (successfully). But it still struck at same place after reboot.
I tried with different recovery images, but still the same observation. I tried to boot by key combination (volume down+home+power), still same observation.
Earlier, I installed ROM manager through google play and installed CWM recovery, version 5.xxx (which I feel now is a mistake), as I tried to install CM11 from MukilSoni, which needs CWM version 6.xx +. I am able to go into recovery and select CM11 image through CWM and proceed with install steps. But, after initial selection in CWM (like app install, etc) it rebooted and went into fastboot mode.I checked the log, it ended with some return error 7.
Then, I tried to Google and check how to recover from fastboot mode, but all failed. I didnt tried KDZ method, but thought to hear from you guys before making it more messy.
Glad, if I get any help and appreciate it.
Thanks for reading it and your time.
Regards,
Ganesh

Hi,
I have put more than 12 hours of my time, before creating this thread. I have tried things, but still struck, so thought to post it in a new thread. Thanks for all your time.
Currently struck in,
fastboot mode started udc_start()
I tried, fastboot erase recovery -> fastboot flash recovery recovery.img -> fastboot reboot (successfully). But it still struck at same place after reboot.
I tried with different recovery images, but still the same observation. I tried to boot by key combination (volume down+home+power), still same observation.
Earlier, I installed ROM manager through google play and installed CWM recovery, version 5.xxx (which I feel now is a mistake), as I tried to install CM11 from MukilSoni, which needs CWM version 6.xx +. I am able to go into recovery and select CM11 image through CWM and proceed with install steps. But, after initial selection in CWM (like app install, etc) it rebooted and went into fastboot mode.I checked the log, it ended with some return error 7.
Then, I tried to Google and check how to recover from fastboot mode, but all failed. I didnt tried KDZ method, but thought to hear from you guys before making it more messy.
Glad, if I get any help and appreciate it.
Thanks for reading it and your time.
Regards,
Ganesh
Click to expand...
Click to collapse
Did you ever try pull out the battery, reinsert, reboot system with 3 buttons combination? I got several fastboot mode as you're facing, and the system works just fine using above method.
I think you got just soft brick. Please, keep the device stay untouched until someone with such expertise to solve the problem will guide you. I think @akiratoriyama can share his bad experience bricking his lovely p500.
Wish you luck.
PS.
You must to press three buttons a bit longer, do not release it, until recovery mode appearing. Otherwise fastboot mode or blank screen showing instead.
Sent from my Optimus One using xda app-developers app

agk.ganesh said:
Hi,
I have put more than 12 hours of my time, before creating this thread. I have tried things, but still struck, so thought to post it in a new thread. Thanks for all your time.
Currently struck in,
fastboot mode started udc_start()
I tried, fastboot erase recovery -> fastboot flash recovery recovery.img -> fastboot reboot (successfully). But it still struck at same place after reboot.
I tried with different recovery images, but still the same observation. I tried to boot by key combination (volume down+home+power), still same observation.
Earlier, I installed ROM manager through google play and installed CWM recovery, version 5.xxx (which I feel now is a mistake), as I tried to install CM11 from MukilSoni, which needs CWM version 6.xx +. I am able to go into recovery and select CM11 image through CWM and proceed with install steps. But, after initial selection in CWM (like app install, etc) it rebooted and went into fastboot mode.I checked the log, it ended with some return error 7.
Then, I tried to Google and check how to recover from fastboot mode, but all failed. I didnt tried KDZ method, but thought to hear from you guys before making it more messy.
Glad, if I get any help and appreciate it.
Thanks for reading it and your time.
Regards,
Ganesh
Click to expand...
Click to collapse
Two years ago I bricked my phone also after using ROM manger. Though I will never ever use this or similar tools again. But at least, if I remember correctly, I could revive my phone with the "fastboot erase recovery" method http://forum.xda-developers.com/showthread.php?t=1088046. But since you failed is seems to be another problem. I am not a fastboot expert , but since you bricked your phone with ROM manager too, I wanted to share my success story with above mentioned method and installing AmonRa recovery. So maybe you will give it a second try? All I can remember is, that it is extremely important to follow the instructions exactly.

xu3sno said:
Did you ever try pull out the battery, reinsert, reboot system with 3 buttons combination? I got several fastboot mode as you're facing, and the system works just fine using above method.
I think you got just soft brick. Please, keep the device stay untouched until someone with such expertise to solve the problem will guide you. I think @akiratoriyama can share his bad experience bricking his lovely p500.
Wish you luck.
PS.
You must to press three buttons a bit longer, do not release it, until recovery mode appearing. Otherwise fastboot mode or blank screen showing instead.
Sent from my Optimus One using xda app-developers app
Click to expand...
Click to collapse
androidck said:
Two years ago I bricked my phone also after using ROM manger. Though I will never ever use this or similar tools again. But at least, if I remember correctly, I could revive my phone with the "fastboot erase recovery" method http://forum.xda-developers.com/showthread.php?t=1088046. But since you failed is seems to be another problem. I am not a fastboot expert , but since you bricked your phone with ROM manager too, I wanted to share my success story with above mentioned method and installing AmonRa recovery. So maybe you will give it a second try? All I can remember is, that it is extremely important to follow the instructions exactly.
Click to expand...
Click to collapse
Thanks @xu3sno & @androidck
I am also getting help from mukulsoni & others in Official CM11 version 10 thread.
I am able to go into the flash tool (pointed by mukulsoni, http://forum.xda-developers.com/showpost.php?p=49567169&postcount=45)
and able to go 'Select kernel to hotboot' with recovery.img (CWMod-6.4.0.6-Jan16)
But rebooting by HOME+Volume DOWN+POWER --> goes into CWM recovery of v5.0.2.0 (which i installed initially)
I am thinking, what to do next.
I will keep my progress posted here.
Thanks for listening..

agk.ganesh said:
Thanks @xu3sno & @androidck
I am also getting help from mukulsoni & others in Official CM11 version 10 thread.
I am able to go into the flash tool (pointed by mukulsoni, http://forum.xda-developers.com/showpost.php?p=49567169&postcount=45)
and able to go 'Select kernel to hotboot' with recovery.img (CWMod-6.4.0.6-Jan16)
But rebooting by HOME+Volume DOWN+POWER --> goes into CWM recovery of v5.0.2.0 (which i installed initially)
I am thinking, what to do next.
I will keep my progress posted here.
Thanks for listening..
Click to expand...
Click to collapse
Are you sure that you are booting into cwm v5.0.2.0? Version is listed at the top. If that is true, then either the flash tool failed to flash cwm v6.4.0.6, or you have chosen the wrong recovery.img. This can easily happen since they all have the same name. Try to flash it again, but make sure that you use the correct image.
Also, I believe that you may not have any rom installed, or existing rom might be corrupted. So you may want to flash a cm-9 or cm-10.x rom first, just to stabilize and to be sure that you are healthy. Those can be flashed using cwm 5.0.2.0. I can post a link or two, if you'd like.
Edit: Here is a link to cm-10.1.6:
http://jenkins.androidarmv6.org/view/All/job/android/597/
Gapps already included.
Sent from my LG-P509 using Tapatalk 2

ibub said:
Are you sure that you are booting into cwm v5.0.2.0?
Also, I believe that you may not have any rom installed, or existing rom might be corrupted. So you may want to flash a cm-9 or cm-10.x rom first, just to stabilize and to be sure that you are healthy. Those can be flashed using cwm 5.0.2.0. I can post a link or two, if you'd like.
Click to expand...
Click to collapse
+1

CM10.1.6 worked
ibub said:
Are you sure that you are booting into cwm v5.0.2.0? Version is listed at the top. If that is true, then either the flash tool failed to flash cwm v6.4.0.6, or you have chosen the wrong recovery.img. This can easily happen since they all have the same name. Try to flash it again, but make sure that you use the correct image.
Also, I believe that you may not have any rom installed, or existing rom might be corrupted. So you may want to flash a cm-9 or cm-10.x rom first, just to stabilize and to be sure that you are healthy. Those can be flashed using cwm 5.0.2.0. I can post a link or two, if you'd like.
Edit: Here is a link to cm-10.1.6:
http://jenkins.androidarmv6.org/view/All/job/android/597/
Gapps already included.
Sent from my LG-P509 using Tapatalk 2
Click to expand...
Click to collapse
Thanks @ibub for your helping hand.
I will check why recovery image not upgrading as expected. (I didn't manually download CWM5.xx version to my PC. I got it via ROM manager app, so i hope I haven't chosen wrong image)
Yes, I got CM10.1.6 from your link and installation went successfully and able to boot up..
But, it is very slow. (May be it will take some time?!) I will check it.
Between, @mukulsoni advised to install CWM6.xxx via CWM5.0.2.0. I will check how it goes.
mns123 said:
+1
Click to expand...
Click to collapse
Thanks.

agk.ganesh said:
Thanks @ibub for your helping hand.
I will check why recovery image not upgrading as expected. (I didn't manually download CWM5.xx version to my PC. I got it via ROM manager app, so i hope I haven't chosen wrong image)
Yes, I got CM10.1.6 from your link and installation went successfully and able to boot up..
But, it is very slow. (May be it will take some time?!) I will check it.
Between, @mukulsoni advised to install CWM6.xxx via CWM5.0.2.0. I will check how it goes.
Thanks.
Click to expand...
Click to collapse
Yeah, I chose to post that link only to make sure that your phone is healthy. Now you can install any recovery/rom that you want. If your volume keys are broken, I suggest that you flash to twrp recovery. It's touch driven.
Sent from my LG-P509 using Tapatalk 2

Thanks
ibub said:
Yeah, I chose to post that link only to make sure that your phone is healthy. Now you can install any recovery/rom that you want. If your volume keys are broken, I suggest that you flash to twrp recovery. It's touch driven.
Sent from my LG-P509 using Tapatalk 2
Click to expand...
Click to collapse
Yes, I will try installing now new recovery and then new ROM.
Very glad to see the support from you guys... Thanks ibub and all..

[rant] NEVER EVER USE KDZ. PERIOD. :crying: [/rant]
Best of luck on your ROM journey :good:

Thanks
akiratoriyama said:
[rant] NEVER EVER USE KDZ. PERIOD. :crying: [/rant]
Best of luck on your ROM journey :good:
Click to expand...
Click to collapse
Thanks @akiratoriyama.
I have upgraded CWM recovery 6.xx through CWM 5.0.2.0 and successfully installed MukulSoni's Kitkat ROM.
And enjoying eating kitkat..
Thanks all..