Database Info

Stuck on android text screen after flashing CyanogenMod 7 MusicEdition_v1.1

Okay saw this CyanogenMod 7 MusicEdition_v1.1 rom for galaxy fit
galaxy fit is on 2.3.4 Gingerbread xwdq2 ver
did everything as per instructions but now i am stuck on android text duriing boot
1.Download the file
2.Copy it to ur sd card
3.go to recovery mode
4.Do a backup.
5.Wipe data n cache.
6.Flash the rom.
7.Reboot.
any help wat m i missing? btw was on stock rom so recovery mode also is stock
when i wipe data and cache after flashing this rom i get rfs failed what is this?

flash it over cm7.1 it worked for me

wrong section
same problem
please help.....
---------- Post added at 10:50 PM ---------- Previous post was at 10:43 PM ----------
managed to install stock rom, but need help installing it!

Flash cm 7.2 rc3 and then the music edition...!! will work for sure

1st flash ClockworkMod recovery by tjstyle
then flash this rom
if u flash from stock recovery it wont work

johnlobo789 said:
1st flash ClockworkMod recovery by tjstyle
then flash this rom
if u flash from stock recovery it wont work
Click to expand...
Click to collapse
He's right man.. You should've flashing CWM 5 by tj_style to your phone via Odin first.
After that you go to the recovery mode and flashing the roms you want..
Don't forget to wipe data n cache before and AFTER flashing Rom..

i used odin installer to root my device

cygnus39 said:
He's right man.. You should've flashing CWM 5 by tj_style to your phone via Odin first.
After that you go to the recovery mode and flashing the roms you want..
Don't forget to wipe data n cache before and AFTER flashing Rom..
Click to expand...
Click to collapse
hi i have a problem with my galaxy s2 i have the cyanogenmod and i was going to sell it and i decided to do a factory reset then when i power up the cyanogenmod logo is stuck the logo keeps moving but it stays there. What can i do?

this thread for galaxy fit but I think you need flashing other rom it is not big problem.

Wrong section, mate.
EDIT: Thread moved

[Q] Root SL/GT i9003

Dears,
Good Day, i need your advice about SL/GT i9003. the mobile was v2.2 "Foryo" and i wanted to upgrade it to 2.3.6 "Gingerbread" but i did not find any version related to my firmware "JXKB1" and i rooted it to another version "JXKP3" and now i am facing problem with weird behavior as the i set ringing tone sound to the highest and the sound is very low, i receive my SMS in mail , and it keep force close application.
i need to know how to fix this problem.

Reflash your phone via Odin with the firmware of your choice. Boot into recovery and wipe Dalvik Cache and factory reset.

theappoos
SikanderKeynes said:
Reflash your phone via Odin with the firmware of your choice. Boot into recovery and wipe Dalvik Cache and factory reset.
Click to expand...
Click to collapse
can you explain how to Boot into recovery and wipe Dalvik Cache ??

.NouR. said:
can you explain how to Boot into recovery and wipe Dalvik Cache ??
Click to expand...
Click to collapse
To enter to CWM, shut down the phone and then:
press the buttons: vol min + home key + power button until the phone vibrate then release it.
Then in recovery go to advance -> wipe dalvik cache.

neodarklink said:
To enter to CWM, shut down the phone and then:
press the buttons: vol min + home key + power button until the phone vibrate then release it.
Then in recovery go to advance -> wipe dalvik cache.
Click to expand...
Click to collapse
Thanks for your support, but can you explain what this step do?

neodarklink said:
To enter to CWM, shut down the phone and then:
press the buttons: vol min + home key + power button until the phone vibrate then release it.
Then in recovery go to advance -> wipe dalvik cache.
Click to expand...
Click to collapse
He needs to flash CWM first.

http://forum.xda-developers.com/showthread.php?t=1351056
just flash with ODIN selecting in the PDA source the CWM file

Dears,
i installed ROM 2.3.4 "JXKP3" and for the first 2 days the ringtone sound was loud with no problem but now the ringtone can not be heard.
appreciate your support

.NouR. said:
Dears,
i installed ROM 2.3.4 "JXKP3" and for the first 2 days the ringtone sound was loud with no problem but now the ringtone can not be heard.
appreciate your support
Click to expand...
Click to collapse
hmmm.
i think, then its a hardware problem.

rohan. said:
hmmm.
i think, then its a hardware problem.
Click to expand...
Click to collapse
I had this similar problem, but I think not the same in cm7.1. Sometimes ringtone rings from phone loudspeaker that means it can be controlled by media volume. But sometimes it came from phone earphone, then it can be controlled by call volume

Dears,
i will try to flash it again but i need your recommendation for a ROM with Arabic support

rohitiskul said:
I had this similar problem, but I think not the same in cm7.1. Sometimes ringtone rings from phone loudspeaker that means it can be controlled by media volume. But sometimes it came from phone earphone, then it can be controlled by call volume
Click to expand...
Click to collapse
what is cm7.1 ?

.NouR. said:
Dears,
i will try to flash it again but i need your recommendation for a ROM with Arabic support
Click to expand...
Click to collapse
Titanium rom . I think they added arabic support
http://forum.xda-developers.com/showthread.php?mode=hybrid&t=1463438

.NouR. said:
what is cm7.1 ?
Click to expand...
Click to collapse
cynogenmod!

.NouR. said:
what is cm7.1 ?
Click to expand...
Click to collapse
It is CyanogenMod 7.1 .
http://forum.xda-developers.com/showthread.php?t=1527359

rohitiskul said:
Titanium rom . I think they added arabic support
http://forum.xda-developers.com/showthread.php?mode=hybrid&t=1463438
Click to expand...
Click to collapse
please i need to know if all the steps done at one time or i flash each rom separately
Flash XXKPE
Flash DDKP3
Flash BAM Kernel V9 Universal
Place the zip on your external sd-card
Reboot into Recovery
Select Install zip from sd-card, choose zip from sd-card...
After first reboot, Wipe Cache, Dalvik Cache.
Factory-reset is optional.

.NouR. said:
please i need to know if all the steps done at one time or i flash each rom separately
Flash XXKPE
Flash DDKP3
Flash BAM Kernel V9 Universal
Place the zip on your external sd-card
Reboot into Recovery
Select Install zip from sd-card, choose zip from sd-card...
After first reboot, Wipe Cache, Dalvik Cache.
Factory-reset is optional.
Click to expand...
Click to collapse
Factory reset is a must if you're coming from stock and don't restore any system data
Cheers
Sent from my GT-i9003 powered by MIUI

bscraze said:
Factory reset is a must if you're coming from stock and don't restore any system data
Cheers
Sent from my GT-i9003 powered by MIUI
Click to expand...
Click to collapse
Dears,
my question relation to following part:
Flash XXKPE
Flash DDKP3
Flash BAM Kernel V9 Universal
Place the zip on your external sd-card
all ROMs will be on sd-card then flash it or i should flash each ROM by odin??
and what is BAM Kernel V9 Universal ??????

.NouR. said:
Dears,
my question relation to following part:
Flash XXKPE
Flash DDKP3
Flash BAM Kernel V9 Universal
Place the zip on your external sd-card
all ROMs will be on sd-card then flash it or i should flash each ROM by odin??
and what is BAM Kernel V9 Universal ??????
Click to expand...
Click to collapse
The kernel roots your phone. What rom are you trying to flash?
Cheers
Sent from my GT-i9003 powered by MIUI

.NouR. said:
Dears,
my question relation to following part:
Flash XXKPE
Flash DDKP3
Flash BAM Kernel V9 Universal
Place the zip on your external sd-card
all ROMs will be on sd-card then flash it or i should flash each ROM by odin??
and what is BAM Kernel V9 Universal ??????
Click to expand...
Click to collapse
Do one at a time
Flash XXKPE -> odin (1st step)
Flash DDKP3 -> odin (2nd step)
Flash BAM Kernel V9 Universal -> odin 3rd(please confirm this from kernel thread page)( i havent used bam kernel)
(also check if it comes with CWM)
Factory reset before 1st step is must
wipe dalvik cache,cache after and before first two steps and this last step
Place the zip on your external sd-card -> which zip ?

[Q] Rom installation error

hi,
I have CWM 6.0.2.8 and 4.1.2 JB
I wiped data, wiped cache, wiped Dalvig Cache
then i installed this rom and then installed gapps of CM 11
when i click on reboot system now it shows "Samsung Galaxy s II plus gt-I9105P"
That's all. it is stuck there.
Please help, what to do!?

Does not work on 4.1 stock ROM's bootloader, please upgrade to 4.2 before flashing

fmehdi said:
Does not work on 4.1 stock ROM's bootloader, please upgrade to 4.2 before flashing
Click to expand...
Click to collapse
my phone is not starting now, can you please tell me how can i upgrade to a 4.2 JB?

vinitpaul said:
my phone is not starting now, can you please tell me how can i upgrade to a 4.2 JB?
Click to expand...
Click to collapse
Download Odin.
Download stock ROM from http://sammobile.com

sunniebeta said:
Download Odin.
Download stock ROM from http://sammobile.com
Click to expand...
Click to collapse
1. Go in download mode(VOL UP+HOME+POWER)
2. Then connect your phone to PC
3. Run ODIN as administrator
4. Find your stock rom from the PDA section in ODIN and press Start
5. Wait until the flashing procces finish and then go in stock recovery and make wipe/factory reset and wipe cache partition

[Q] tutorial installing alienron v5

anyone can help me?....i am having xperia j firm .31 JB and i want to install alienrom v5...http://forum.xda-developers.com/xperia-j-e/development/rom-alienrom-super-hot-update-v3-fxp-t2527939 i follow the instructions but i dont understand the procedure after go to the "fix permission" before i flash the JB kernel should i go to "reboot the system" (in CWM) or just pull out the battery the flash the kernel through flashtool. Because i have tried 4 times and its always bootloop ( what did i missed)...thank you in advance

reflash
Lebox said:
anyone can help me?....i am having xperia j firm .31 JB and i want to install alienrom v5...http://forum.xda-developers.com/xperia-j-e/development/rom-alienrom-super-hot-update-v3-fxp-t2527939 i follow the instructions but i dont understand the procedure after go to the "fix permission" before i flash the JB kernel should i go to "reboot the system" (in CWM) or just pull out the battery the flash the kernel through flashtool. Because i have tried 4 times and its always bootloop ( what did i missed)...thank you in advance
Click to expand...
Click to collapse
if ur getting bootloop go to cwm and re-flash the rom try this

slogger001 said:
if ur getting bootloop go to cwm and re-flash the rom try this
Click to expand...
Click to collapse
i already tried that many times still getting that....i mean what did i missed here in installation guide or maybe because of me from jellybean instread of ICS

Then downgrade
Lebox said:
i already tried that many times still getting that....i mean what did i missed here in installation guide or maybe because of me from jellybean instread of ICS
Click to expand...
Click to collapse
try this after downgrading ur phone

slogger001 said:
try this after downgrading ur phone
Click to expand...
Click to collapse
ok thaks i will try again....but what about the instruction in....
Instructions
Quote:
- To avoid any problems, I suggest you flash coming from Stock ICS or Stock JB...Coming from ICS is easier though ( .31 FW)
- Root your phone and install a recovery ( ICS RECOVERY IN 3RD POST )
NOTE: ICS REVOERY IS DIFFERENT FROM JB RECOVERY ( JB CWM here: Click Here! ) ( Use that if COMING FROM JB otherwise use the ICS recovery )
- Copy the ROM to your SD Card ( External )
- Boot into CWM ( volume down/up button like up-down-up-down )
- Wipe Data/Factory Reset then Wipe Cache Partition
- Navigate to advanced and Wipe Dalvik Cache
- Format /system ( ONLY SYSTEM )( V4 and V5 only ) ( no need for V4.1 and Below )
- Install/flash the ROM and install/flash the Rootfix.zip
- Navigate to Advanced and Fix Permissions
- Flash the .31 Kernel provided in downloads
- IF COMING FROM ICS ONLY DO NOT POWER OFF YET !!!!
- Remove Battery then put it back again
- Flash the .31 Kernel ( download in links ) using flashtool ( UNTICK FINAL DATA VERIFICATION )
- Done and Enjoy the ROM
step no 7 Navigate to Advanced and Fix Permission ....after this what should i do? go to reboot or just pull out battery before flashing (flash the .31 on no 8 step) this where i getting confuse

Try both
Lebox said:
ok thaks i will try again....but what about the instruction in....
Instructions
Quote:
- To avoid any problems, I suggest you flash coming from Stock ICS or Stock JB...Coming from ICS is easier though ( .31 FW)
- Root your phone and install a recovery ( ICS RECOVERY IN 3RD POST )
NOTE: ICS REVOERY IS DIFFERENT FROM JB RECOVERY ( JB CWM here: Click Here! ) ( Use that if COMING FROM JB otherwise use the ICS recovery )
- Copy the ROM to your SD Card ( External )
- Boot into CWM ( volume down/up button like up-down-up-down )
- Wipe Data/Factory Reset then Wipe Cache Partition
- Navigate to advanced and Wipe Dalvik Cache
- Format /system ( ONLY SYSTEM )( V4 and V5 only ) ( no need for V4.1 and Below )
- Install/flash the ROM and install/flash the Rootfix.zip
- Navigate to Advanced and Fix Permissions
- Flash the .31 Kernel provided in downloads
- IF COMING FROM ICS ONLY DO NOT POWER OFF YET !!!!
- Remove Battery then put it back again
- Flash the .31 Kernel ( download in links ) using flashtool ( UNTICK FINAL DATA VERIFICATION )
- Done and Enjoy the ROM
step no 7 Navigate to Advanced and Fix Permission ....after this what should i do? go to reboot or just pull out battery before flashing (flash the .31 on no 8 step) this where i getting confuse
Click to expand...
Click to collapse
hmm....look I have not tried this ,the Normal method is to flash kernel and reboot then install rom
So I would recommend u to try both

After "fix permission" I removed the battery and then used flashtool to flash the. 31 firmware.
It worked fine.
Sent from my ST26i using xda app-developers app

Have you try this:
-First install .31 (JB) stock ROM, then install the recovery
-The open the recovery and Wipe Data/Factory Reset then Wipe Cache Partition
-Next, go to advanced and Wipe Dalvik Cache
- Format /system and then flash the ROM and the rootfix.zip
-Then fix permissions
Hope it worked on you! Good luck :victory: !

[Q] quiestion cyanogenmod 10 samsung infuse

Hi guys please help me someone pass me the link cyanogenmod 10 android 4.1.2 for samsung infuse and gapps please please i for moment android 2.3.6 and do not remember the steps and I find red kernel or ROM cyanogenmod 4.1.2 for infuse please

SmokaHontas said:
Hi guys please help me someone pass me the link cyanogenmod 10 android 4.1.2 for samsung infuse and gapps please please i for moment android 2.3.6 and do not remember the steps and I find red kernel or ROM cyanogenmod 4.1.2 for infuse please
Click to expand...
Click to collapse
For a while, I wasn't sure if scott.hart.bti even made a CM10.0 ROM. According to the changelog in this link, one existed:
http://forum.xda-developers.com/showthread.php?t=1776129
Unfortunately, all that is available now is CM 10.1 and 10.2. 10.0 may have been removed because it seems (based on the Q&A thread), CM10 used 4.1.1 (the version affected by Heartbleed), not 4.1.2.
If you want to stick with CM 10.x, I would recommend 10.1. Here is the process (from Gingerbread):
Obtain CWM, this can be done using Jscotts Odin back to stock (Follow instructions and use SGS kernal flasher to obtain CWM)
Run Qksters IMEI backup script here
Make certain you are on ICS, this can be done by flashing Entropy's CM9
It is recommended now that you remove your SD Card
CWM: Wipe Cache / Factory Reset
Install ROM: Scroll down for downloads section
... The package will start to install..
... Phone will reboot into the install screen again...
... Continue to install [Automatically] If not manually flash again
... Phone will reboot again and be at the recovery screen...
Install Gapps
CWM: Wipe Cache Partition
CWM: Advanced/Wipe Dalvik Cache
Reboot
Click to expand...
Click to collapse
Download links are found in the first thread link above, or here:
http://goo.im/devs/scotthartbti/unofficialcm10/
http://www.goo.im/gapps
Hope this helps.

joel.maxuel said:
For a while, I wasn't sure if scott.hart.bti even made a CM10.0 ROM. According to the changelog in this link, one existed:
http://forum.xda-developers.com/showthread.php?t=1776129
Unfortunately, all that is available now is CM 10.1 and 10.2. 10.0 may have been removed because it seems (based on the Q&A thread), CM10 used 4.1.1 (the version affected by Heartbleed), not 4.1.2.
If you want to stick with CM 10.x, I would recommend 10.1. Here is the process (from Gingerbread):
Download links are found in the first thread link above, or here:
http://goo.im/devs/scotthartbti/unofficialcm10/
http://www.goo.im/gapps
Hope this helps.
Click to expand...
Click to collapse
man and how update with slimbean 4.2.2 I find the gapps please help me

SmokaHontas said:
man and how update with slimbean 4.2.2 I find the gapps please help me
Click to expand...
Click to collapse
I am assuming you already have Slim Bean installed. Here's the thread to download:
http://forum.xda-developers.com/showthread.php?p=34430995
To update, all you really need to do is download the final image, save it to the SD card, flash it with CWM/TWRP then clear the dalvik cache.
Don't think there is a need to flash gapps as well since you are not factory resetting in this case. Unless your current version of Slim Bean is not 4.2.x, then you will need gapps (and even then a factory reset would be recommended).
If you are looking to install from scratch, the guide above (in my previous post) is pretty standard (looks to be the same was what is provided in the link).

joel.maxuel said:
I am assuming you already have Slim Bean installed. Here's the thread to download:
http://forum.xda-developers.com/showthread.php?p=34430995
To update, all you really need to do is download the final image, save it to the SD card, flash it with CWM/TWRP then clear the dalvik cache.
Don't think there is a need to flash gapps as well since you are not factory resetting in this case. Unless your current version of Slim Bean is not 4.2.x, then you will need gapps (and even then a factory reset would be recommended).
If you are looking to install from scratch, the guide above (in my previous post) is pretty standard (looks to be the same was what is provided in the link).
Click to expand...
Click to collapse
I plan to use these steps but I'm confused if you use a kernel for gb rom and with slimbean or when flashing in cm 9
Instructions
Coming from Froyo(2.2) Gingerbread(2.3) or ICS(4.0)
Obtain CWM, this can be done using Jscotts Odin back to stock (Follow instructions and use SGS kernal flasher to obtain CWM)
Run Qksters IMEI backup script here
Make certain you are on ICS, this can be done by flashing Entropy's CM9
It is recommended now that you remove your SD Card
CWM: Wipe Cache / Factory Reset
Install ROM
... The package will start to install..
... Phone will reboot into the install screen again...
... Continue to install [Automatically] If not manually flash again
... Phone will reboot again and be at the recovery screen...
Install Gapps
CWM: Wipe Cache Partition
CWM: Advanced/Wipe Dalvik Cache
Reboot
please help and thans

SmokaHontas said:
I plan to use these steps but I'm confused if you use a kernel for gb rom and with slimbean or when flashing in cm 9
Instructions
Coming from Froyo(2.2) Gingerbread(2.3) or ICS(4.0)
Obtain CWM, this can be done using Jscotts Odin back to stock (Follow instructions and use SGS kernal flasher to obtain CWM)
Run Qksters IMEI backup script here
Make certain you are on ICS, this can be done by flashing Entropy's CM9
It is recommended now that you remove your SD Card
CWM: Wipe Cache / Factory Reset
Install ROM
... The package will start to install..
... Phone will reboot into the install screen again...
... Continue to install [Automatically] If not manually flash again
... Phone will reboot again and be at the recovery screen...
Install Gapps
CWM: Wipe Cache Partition
CWM: Advanced/Wipe Dalvik Cache
Reboot
please help and thans
Click to expand...
Click to collapse
No kernel necessary. Just need CWM to start with (can access by performing the "three-finger-salute" - that is, while holding both volume keys, press the power button), and flash (install from zip) Entropy's CM9 with it's respective gapps. That will bring you to ICS and the right version of CWM (Blue I think). You are free to then flash Slim Bean.
Hope this explains better.

joel.maxuel said:
No kernel necessary. Just need CWM to start with (can access by performing the "three-finger-salute" - that is, while holding both volume keys, press the power button), and flash (install from zip) Entropy's CM9 with it's respective gapps. That will bring you to ICS and the right version of CWM (Blue I think). You are free to then flash Slim Bean.
Hope this explains better.
Click to expand...
Click to collapse
yes man very thans for everything

are you just going to JB or are you thinking or going to KitKat?

..
SmokaHontas said:
Hi guys please help me someone pass me the link cyanogenmod 10 android 4.1.2 for samsung infuse and gapps please please i for moment android 2.3.6 and do not remember the steps and I find red kernel or ROM cyanogenmod 4.1.2 for infuse please
Click to expand...
Click to collapse
Look it up on the google if you are tire of looking through the forum.
You got to update the rom. there is even video tutorial that Ricky Ericson made if you don´t want to read.
I am a noob also in this but the video guide helps alot.
Have fun flashing!