Database Info

[Q] Root SL/GT i9003

Dears,
Good Day, i need your advice about SL/GT i9003. the mobile was v2.2 "Foryo" and i wanted to upgrade it to 2.3.6 "Gingerbread" but i did not find any version related to my firmware "JXKB1" and i rooted it to another version "JXKP3" and now i am facing problem with weird behavior as the i set ringing tone sound to the highest and the sound is very low, i receive my SMS in mail , and it keep force close application.
i need to know how to fix this problem.

Reflash your phone via Odin with the firmware of your choice. Boot into recovery and wipe Dalvik Cache and factory reset.

theappoos
SikanderKeynes said:
Reflash your phone via Odin with the firmware of your choice. Boot into recovery and wipe Dalvik Cache and factory reset.
Click to expand...
Click to collapse
can you explain how to Boot into recovery and wipe Dalvik Cache ??

.NouR. said:
can you explain how to Boot into recovery and wipe Dalvik Cache ??
Click to expand...
Click to collapse
To enter to CWM, shut down the phone and then:
press the buttons: vol min + home key + power button until the phone vibrate then release it.
Then in recovery go to advance -> wipe dalvik cache.

neodarklink said:
To enter to CWM, shut down the phone and then:
press the buttons: vol min + home key + power button until the phone vibrate then release it.
Then in recovery go to advance -> wipe dalvik cache.
Click to expand...
Click to collapse
Thanks for your support, but can you explain what this step do?

neodarklink said:
To enter to CWM, shut down the phone and then:
press the buttons: vol min + home key + power button until the phone vibrate then release it.
Then in recovery go to advance -> wipe dalvik cache.
Click to expand...
Click to collapse
He needs to flash CWM first.

http://forum.xda-developers.com/showthread.php?t=1351056
just flash with ODIN selecting in the PDA source the CWM file

Dears,
i installed ROM 2.3.4 "JXKP3" and for the first 2 days the ringtone sound was loud with no problem but now the ringtone can not be heard.
appreciate your support

.NouR. said:
Dears,
i installed ROM 2.3.4 "JXKP3" and for the first 2 days the ringtone sound was loud with no problem but now the ringtone can not be heard.
appreciate your support
Click to expand...
Click to collapse
hmmm.
i think, then its a hardware problem.

rohan. said:
hmmm.
i think, then its a hardware problem.
Click to expand...
Click to collapse
I had this similar problem, but I think not the same in cm7.1. Sometimes ringtone rings from phone loudspeaker that means it can be controlled by media volume. But sometimes it came from phone earphone, then it can be controlled by call volume

Dears,
i will try to flash it again but i need your recommendation for a ROM with Arabic support

rohitiskul said:
I had this similar problem, but I think not the same in cm7.1. Sometimes ringtone rings from phone loudspeaker that means it can be controlled by media volume. But sometimes it came from phone earphone, then it can be controlled by call volume
Click to expand...
Click to collapse
what is cm7.1 ?

.NouR. said:
Dears,
i will try to flash it again but i need your recommendation for a ROM with Arabic support
Click to expand...
Click to collapse
Titanium rom . I think they added arabic support
http://forum.xda-developers.com/showthread.php?mode=hybrid&t=1463438

.NouR. said:
what is cm7.1 ?
Click to expand...
Click to collapse
cynogenmod!

.NouR. said:
what is cm7.1 ?
Click to expand...
Click to collapse
It is CyanogenMod 7.1 .
http://forum.xda-developers.com/showthread.php?t=1527359

rohitiskul said:
Titanium rom . I think they added arabic support
http://forum.xda-developers.com/showthread.php?mode=hybrid&t=1463438
Click to expand...
Click to collapse
please i need to know if all the steps done at one time or i flash each rom separately
Flash XXKPE
Flash DDKP3
Flash BAM Kernel V9 Universal
Place the zip on your external sd-card
Reboot into Recovery
Select Install zip from sd-card, choose zip from sd-card...
After first reboot, Wipe Cache, Dalvik Cache.
Factory-reset is optional.

.NouR. said:
please i need to know if all the steps done at one time or i flash each rom separately
Flash XXKPE
Flash DDKP3
Flash BAM Kernel V9 Universal
Place the zip on your external sd-card
Reboot into Recovery
Select Install zip from sd-card, choose zip from sd-card...
After first reboot, Wipe Cache, Dalvik Cache.
Factory-reset is optional.
Click to expand...
Click to collapse
Factory reset is a must if you're coming from stock and don't restore any system data
Cheers
Sent from my GT-i9003 powered by MIUI

bscraze said:
Factory reset is a must if you're coming from stock and don't restore any system data
Cheers
Sent from my GT-i9003 powered by MIUI
Click to expand...
Click to collapse
Dears,
my question relation to following part:
Flash XXKPE
Flash DDKP3
Flash BAM Kernel V9 Universal
Place the zip on your external sd-card
all ROMs will be on sd-card then flash it or i should flash each ROM by odin??
and what is BAM Kernel V9 Universal ??????

.NouR. said:
Dears,
my question relation to following part:
Flash XXKPE
Flash DDKP3
Flash BAM Kernel V9 Universal
Place the zip on your external sd-card
all ROMs will be on sd-card then flash it or i should flash each ROM by odin??
and what is BAM Kernel V9 Universal ??????
Click to expand...
Click to collapse
The kernel roots your phone. What rom are you trying to flash?
Cheers
Sent from my GT-i9003 powered by MIUI

.NouR. said:
Dears,
my question relation to following part:
Flash XXKPE
Flash DDKP3
Flash BAM Kernel V9 Universal
Place the zip on your external sd-card
all ROMs will be on sd-card then flash it or i should flash each ROM by odin??
and what is BAM Kernel V9 Universal ??????
Click to expand...
Click to collapse
Do one at a time
Flash XXKPE -> odin (1st step)
Flash DDKP3 -> odin (2nd step)
Flash BAM Kernel V9 Universal -> odin 3rd(please confirm this from kernel thread page)( i havent used bam kernel)
(also check if it comes with CWM)
Factory reset before 1st step is must
wipe dalvik cache,cache after and before first two steps and this last step
Place the zip on your external sd-card -> which zip ?

GALAXY Y Boots only in Stock ROM even after flash

I had rooted my phone, and did use Jelly Blast for a while worked perfect. After a few days I tried installing mods through cwm which led to boot loops. I used odin and got stock ROM for my phone . Now when I tried installing Nemesis ROM, I followed all steps right but though it shows Nemesis boot picture, it still boots into the stock OS.

Update ur cwm version
Flash ur rom again
It will ask u to disable stock recovery say yes
This should fix ur problem:thumbup:
Hit thanks if i helped
Sent from my GT-S7500

[email protected] said:
Update ur cwm version
Flash ur rom again
It will ask u to disable stock recovery say yes
This should fix ur problem:thumbup:
Hit thanks if i helped
Sent from my GT-S7500
Click to expand...
Click to collapse
Hey I'm a noob. By flash your rom, do you suggest to flash the same nemesis rom again? And what will ask me to disable stock recovery? I have cwm version 5.0.2.6 right now.

try this
wipe data
wipe cache
wife dalvik cache
install stock rom via odin
then install your desired rom via cwm
Sent from my GT-S5302 using xda premium

DJDSB said:
try this
wipe data
wipe cache
wife dalvik cache
install stock rom via odin
then install your desired rom via cwm
Sent from my GT-S5302 using xda premium
Click to expand...
Click to collapse
I have tried the following steps:
1. Odin stock rom: I just have pda,csc and modem. I do not have bootloader and pit.
2. Then went to Recovery and installed CWM
3. Installed custom rom JELLY Blast which previously had no issues. (Before this I wiped data,cache & dalvik)
4. Result - > Stuck on Samsung screen.
After which I cannot get back to any recovery mode anymore, it is stuck on samsung screen. All I have to do is go back to download mode and odin it again. But I really want to be back on custom roms

pavitar said:
Hey I'm a noob. By flash your rom, do you suggest to flash the same nemesis rom again? And what will ask me to disable stock recovery? I have cwm version 5.0.2.6 right now.
Click to expand...
Click to collapse
Yes u have to install rom by normal way
Updare your cwm to V6
Cwm will ask u to disable it
This may help u:thumbup:
Hit thanks if i helped
Sent from my GT-S7500

Generic Rom Flashing Issues
pavitar said:
I had rooted my phone, and did use Jelly Blast for a while worked perfect. After a few days I tried installing mods through cwm which led to boot loops. I used odin and got stock ROM for my phone . Now when I tried installing Nemesis ROM, I followed all steps right but though it shows Nemesis boot picture, it still boots into the stock OS.
Click to expand...
Click to collapse
Hi,
This is not your phone issue alone but any phone can face this. To reproduce this issue, it takes more than what you have mentioned. But the solution comes through if you follow these steps just as listed by me here:
1. Get an older version of official Samsung Firmware (preferably 1 or 2 versions older than the latest one)
2. Flash this using ODIN (if flashing fails at any point via ODIN user an even older Stock Firmware version)
3. If you can boot into the Rom fine, reboot to its Stock Recovery
4. From Stock recover, start the CWM.zip that you have (version 5 or 6 whichever lets you load fine, does not matter at this point)
5. When inside CWM, go into Advanced and select "Fix Permissions"
6. Only after you have fixed permissions, go ahead and do the Wipes in the order below
7. Wipe Dalvik Cache, Wipe Cache, Wipe Data
8. Once this is done, load the custom ROM you want to install from this CWM session
9. After install, when you go for reboot, see if you get any option that says something like "prevent from flashing stock recovery" or so, say yes to it.
This should fix any permission issue that may be preventing you to get to your favorite ROM from stock ROM.
Let me know if this helps or if I can help you further.
Glad if this helped you in any way !
NOTE: THIS IS GENERIC AND NOT SPECIFIC TO ANY ONE PHONE MODEL.

keeploving said:
Hi,
This is not your phone issue alone but any phone can face this. To reproduce this issue, it takes more than what you have mentioned. But the solution comes through if you follow these steps just as listed by me here:
1. Get an older version of official Samsung Firmware (preferably 1 or 2 versions older than the latest one)
2. Flash this using ODIN (if flashing fails at any point via ODIN user an even older Stock Firmware version)
3. If you can boot into the Rom fine, reboot to its Stock Recovery
4. From Stock recover, start the CWM.zip that you have (version 5 or 6 whichever lets you load fine, does not matter at this point)
5. When inside CWM, go into Advanced and select "Fix Permissions"
6. Only after you have fixed permissions, go ahead and do the Wipes in the order below
7. Wipe Dalvik Cache, Wipe Cache, Wipe Data
8. Once this is done, load the custom ROM you want to install from this CWM session
9. After install, when you go for reboot, see if you get any option that says something like "prevent from flashing stock recovery" or so, say yes to it.
This should fix any permission issue that may be preventing you to get to your favorite ROM from stock ROM.
Let me know if this helps or if I can help you further.
Glad if this helped you in any way !
NOTE: THIS IS GENERIC AND NOT SPECIFIC TO ANY ONE PHONE MODEL.
Click to expand...
Click to collapse
Thanks a Ton, this helped me. The only step I did not perform earlier is Fix Permissions.

[q] aosp rom

Is deep sleep issue solved on flasing phatom kernel ? What about WIFI? Is it working in AOSP after flashing kernel? Someone, please confirm that so that I can flash the ROM

sladeslayer said:
Is deep sleep issue solved on flasing phatom kernel ? What about WIFI? Is it working in AOSP after flashing kernel? Someone, please confirm that so that I can flash the ROM
Click to expand...
Click to collapse
yes everything is fine and working
follow the steps
1. flash fresh 4.2.2 (.26 is better but i dont know this step is required or not but i follow this).
2. Flash Phantom Kernel V5 (Kitkat).
3. Flash system.img through Flashtool.
4. Dont Flash userdate.img file (ignore userdata.img)
5. boot into CMW recovery Wipe Data,Wipe Cache,Wipe Dalvik Cache
6. install g-apps
7. reboot.... and DONE !

RazZzeR said:
yes everything is fine and working
follow the steps
1. flash fresh 4.2.2 (.26 is better but i dont know this step is required or not but i follow this).
2. Flash Phantom Kernel V5 (Kitkat).
3. Flash system.img through Flashtool.
4. Dont Flash userdate.img file (ignore userdata.img)
5. boot into CMW recovery Wipe Data,Wipe Cache,Wipe Dalvik Cache
6. install g-apps
7. reboot.... and DONE !
Click to expand...
Click to collapse
Thank u! I'll do it:good:

RazZzeR said:
yes everything is fine and working
follow the steps
1. flash fresh 4.2.2 (.26 is better but i dont know this step is required or not but i follow this).
2. Flash Phantom Kernel V5 (Kitkat).
3. Flash system.img through Flashtool.
4. Dont Flash userdate.img file (ignore userdata.img)
5. boot into CMW recovery Wipe Data,Wipe Cache,Wipe Dalvik Cache
6. install g-apps
7. reboot.... and DONE !
Click to expand...
Click to collapse
I flashed boot.img of phantom.. Phone stuck after sony logo. what to do?

sladeslayer said:
I flashed boot.img of phantom.. Phone stuck after sony logo. what to do?
Click to expand...
Click to collapse
You need to flash the AOSP boot.img file
4.4 can't run on the 4.2 boot.img file

Joery360 said:
You need to flash the AOSP boot.img file
4.4 can't run on the 4.2 boot.img file
Click to expand...
Click to collapse
Finally, i got 4.4.. Thanks for the help.

Bugs..
Wifi works fine. There are these other bugs you see
1. Bluetooth doesn't work.
2. GPS doesn't work.
3. Device memory is the only internal memory available, which means, internal memory is just 2 GB (1.57 GB to be precise) :angel:
sladeslayer said:
Finally, i got 4.4.. Thanks for the help.
Click to expand...
Click to collapse

[Q] quiestion cyanogenmod 10 samsung infuse

Hi guys please help me someone pass me the link cyanogenmod 10 android 4.1.2 for samsung infuse and gapps please please i for moment android 2.3.6 and do not remember the steps and I find red kernel or ROM cyanogenmod 4.1.2 for infuse please

SmokaHontas said:
Hi guys please help me someone pass me the link cyanogenmod 10 android 4.1.2 for samsung infuse and gapps please please i for moment android 2.3.6 and do not remember the steps and I find red kernel or ROM cyanogenmod 4.1.2 for infuse please
Click to expand...
Click to collapse
For a while, I wasn't sure if scott.hart.bti even made a CM10.0 ROM. According to the changelog in this link, one existed:
http://forum.xda-developers.com/showthread.php?t=1776129
Unfortunately, all that is available now is CM 10.1 and 10.2. 10.0 may have been removed because it seems (based on the Q&A thread), CM10 used 4.1.1 (the version affected by Heartbleed), not 4.1.2.
If you want to stick with CM 10.x, I would recommend 10.1. Here is the process (from Gingerbread):
Obtain CWM, this can be done using Jscotts Odin back to stock (Follow instructions and use SGS kernal flasher to obtain CWM)
Run Qksters IMEI backup script here
Make certain you are on ICS, this can be done by flashing Entropy's CM9
It is recommended now that you remove your SD Card
CWM: Wipe Cache / Factory Reset
Install ROM: Scroll down for downloads section
... The package will start to install..
... Phone will reboot into the install screen again...
... Continue to install [Automatically] If not manually flash again
... Phone will reboot again and be at the recovery screen...
Install Gapps
CWM: Wipe Cache Partition
CWM: Advanced/Wipe Dalvik Cache
Reboot
Click to expand...
Click to collapse
Download links are found in the first thread link above, or here:
http://goo.im/devs/scotthartbti/unofficialcm10/
http://www.goo.im/gapps
Hope this helps.

joel.maxuel said:
For a while, I wasn't sure if scott.hart.bti even made a CM10.0 ROM. According to the changelog in this link, one existed:
http://forum.xda-developers.com/showthread.php?t=1776129
Unfortunately, all that is available now is CM 10.1 and 10.2. 10.0 may have been removed because it seems (based on the Q&A thread), CM10 used 4.1.1 (the version affected by Heartbleed), not 4.1.2.
If you want to stick with CM 10.x, I would recommend 10.1. Here is the process (from Gingerbread):
Download links are found in the first thread link above, or here:
http://goo.im/devs/scotthartbti/unofficialcm10/
http://www.goo.im/gapps
Hope this helps.
Click to expand...
Click to collapse
man and how update with slimbean 4.2.2 I find the gapps please help me

SmokaHontas said:
man and how update with slimbean 4.2.2 I find the gapps please help me
Click to expand...
Click to collapse
I am assuming you already have Slim Bean installed. Here's the thread to download:
http://forum.xda-developers.com/showthread.php?p=34430995
To update, all you really need to do is download the final image, save it to the SD card, flash it with CWM/TWRP then clear the dalvik cache.
Don't think there is a need to flash gapps as well since you are not factory resetting in this case. Unless your current version of Slim Bean is not 4.2.x, then you will need gapps (and even then a factory reset would be recommended).
If you are looking to install from scratch, the guide above (in my previous post) is pretty standard (looks to be the same was what is provided in the link).

joel.maxuel said:
I am assuming you already have Slim Bean installed. Here's the thread to download:
http://forum.xda-developers.com/showthread.php?p=34430995
To update, all you really need to do is download the final image, save it to the SD card, flash it with CWM/TWRP then clear the dalvik cache.
Don't think there is a need to flash gapps as well since you are not factory resetting in this case. Unless your current version of Slim Bean is not 4.2.x, then you will need gapps (and even then a factory reset would be recommended).
If you are looking to install from scratch, the guide above (in my previous post) is pretty standard (looks to be the same was what is provided in the link).
Click to expand...
Click to collapse
I plan to use these steps but I'm confused if you use a kernel for gb rom and with slimbean or when flashing in cm 9
Instructions
Coming from Froyo(2.2) Gingerbread(2.3) or ICS(4.0)
Obtain CWM, this can be done using Jscotts Odin back to stock (Follow instructions and use SGS kernal flasher to obtain CWM)
Run Qksters IMEI backup script here
Make certain you are on ICS, this can be done by flashing Entropy's CM9
It is recommended now that you remove your SD Card
CWM: Wipe Cache / Factory Reset
Install ROM
... The package will start to install..
... Phone will reboot into the install screen again...
... Continue to install [Automatically] If not manually flash again
... Phone will reboot again and be at the recovery screen...
Install Gapps
CWM: Wipe Cache Partition
CWM: Advanced/Wipe Dalvik Cache
Reboot
please help and thans

SmokaHontas said:
I plan to use these steps but I'm confused if you use a kernel for gb rom and with slimbean or when flashing in cm 9
Instructions
Coming from Froyo(2.2) Gingerbread(2.3) or ICS(4.0)
Obtain CWM, this can be done using Jscotts Odin back to stock (Follow instructions and use SGS kernal flasher to obtain CWM)
Run Qksters IMEI backup script here
Make certain you are on ICS, this can be done by flashing Entropy's CM9
It is recommended now that you remove your SD Card
CWM: Wipe Cache / Factory Reset
Install ROM
... The package will start to install..
... Phone will reboot into the install screen again...
... Continue to install [Automatically] If not manually flash again
... Phone will reboot again and be at the recovery screen...
Install Gapps
CWM: Wipe Cache Partition
CWM: Advanced/Wipe Dalvik Cache
Reboot
please help and thans
Click to expand...
Click to collapse
No kernel necessary. Just need CWM to start with (can access by performing the "three-finger-salute" - that is, while holding both volume keys, press the power button), and flash (install from zip) Entropy's CM9 with it's respective gapps. That will bring you to ICS and the right version of CWM (Blue I think). You are free to then flash Slim Bean.
Hope this explains better.

joel.maxuel said:
No kernel necessary. Just need CWM to start with (can access by performing the "three-finger-salute" - that is, while holding both volume keys, press the power button), and flash (install from zip) Entropy's CM9 with it's respective gapps. That will bring you to ICS and the right version of CWM (Blue I think). You are free to then flash Slim Bean.
Hope this explains better.
Click to expand...
Click to collapse
yes man very thans for everything

are you just going to JB or are you thinking or going to KitKat?

..
SmokaHontas said:
Hi guys please help me someone pass me the link cyanogenmod 10 android 4.1.2 for samsung infuse and gapps please please i for moment android 2.3.6 and do not remember the steps and I find red kernel or ROM cyanogenmod 4.1.2 for infuse please
Click to expand...
Click to collapse
Look it up on the google if you are tire of looking through the forum.
You got to update the rom. there is even video tutorial that Ricky Ericson made if you don´t want to read.
I am a noob also in this but the video guide helps alot.
Have fun flashing!

[Q] How to install [ROM][AOSP][Nightly/Release] CarbonRom KitKat [ Xperia L ][4.4.3]?

Please explain the installation process in detail.
Installation:
1. Unlock bootloader
2. Flash kernel inside zip
3. Reboot into recovery
4. Wipe data/factory reset,wipe cache and dalvik cache, format system, data, cache
4. Flash ROM and gapps
5. Flash graphical glitches fix
6. Reboot and enjoy the smoothness

pankajmahato said:
Please explain the installation process in detail.
Installation:
1. Unlock bootloader
2. Flash kernel inside zip
3. Reboot into recovery
4. Wipe data/factory reset,wipe cache and dalvik cache, format system, data, cache
4. Flash ROM and gapps
5. Flash graphical glitches fix
6. Reboot and enjoy the smoothness
Click to expand...
Click to collapse
On what rom are you currently at? Is your bootloader UNLOCKED?
If you are on stock ( NOTE: YOU NEED JELLY BEAN 4.2.2 TO INSTAL CUSTOM KITKAT ROMS!!!) then you will need to instal a program which is called FLASHTOOL into your computer.
You will need this in case your phone gets soft bricked or you want to implement fresh kernel installation on your device.
You will need to flash latest clockwork recovery in order to flash newly updated ROMS. (example are THUNDERZAP 4.6 or PHANTOM kernels)
NOTE: Before procceding put your downloaded CUSTOM ROM (ZIP.file) in your internal storage.
After installing kernel,reboot your phone and when the LED light start showing on the bottom of your phone start pressing (or one long press) the volume UP key. Then you will enter into recovery mode.
True there navigate the menu true up/down volume keys.
Go and do CLEAN INSTALL/FACTORY RESET.
Find your CUSTOM ROM file....and flash it!
Reboot your phone and let it load the freshly new installed KK 4.4.4 on your device.
After you set up your phone you will need one more thing.... Ggapps (google apps)
Look up Gapps for KitKat 4.4.4.....download them and flash them true recovery.
That woud be it.....

And can you provide the download links for TWRP, Kernal and Graphics glitches?
vuk030 said:
On what rom are you currently at? Is your bootloader UNLOCKED?
If you are on stock ( NOTE: YOU NEED JELLY BEAN 4.2.2 TO INSTAL CUSTOM KITKAT ROMS!!!) then you will need to instal a program which is called FLASHTOOL into your computer.
You will need this in case your phone gets soft bricked or you want to implement fresh kernel installation on your device.
You will need to flash latest clockwork recovery in order to flash newly updated ROMS. (example are THUNDERZAP 4.6 or PHANTOM kernels)
NOTE: Before procceding put your downloaded CUSTOM ROM (ZIP.file) in your internal storage.
After installing kernel,reboot your phone and when the LED light start showing on the bottom of your phone start pressing (or one long press) the volume UP key. Then you will enter into recovery mode.
True there navigate the menu true up/down volume keys.
Go and do CLEAN INSTALL/FACTORY RESET.
Find your CUSTOM ROM file....and flash it!
Reboot your phone and let it load the freshly new installed KK 4.4.4 on your device.
After you set up your phone you will need one more thing.... Ggapps (google apps)
Look up Gapps for KitKat 4.4.4.....download them and flash them true recovery.
That woud be it.....
Click to expand...
Click to collapse
I am currently on the stock ROM given by Sony which is 4.2.2 and the Build no. if 15.3.A.1.17
My bootloader is not unlocked. But my phone is rooted.
And can I make a backup of my entire phone before unlocking bootloader?
And can you provide the download links for TWRP, Kernal and Graphics glitches?
And the procedure for installation of these files would be very much helpful.
I searched for these files but was unable to find it.

pankajmahato said:
I am currently on the stock ROM given by Sony which is 4.2.2 and the Build no. if 15.3.A.1.17
My bootloader is not unlocked. But my phone is rooted.
And can I make a backup of my entire phone before unlocking bootloader?
And can you provide the download links for TWRP, Kernal and Graphics glitches?
And the procedure for installation of these files would be very much helpful.
I searched for these files but was unable to find it.
Click to expand...
Click to collapse
http://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/
http://forum.xda-developers.com/xperia-l/development/guide-installing-kernels-roms-xperia-l-t2548498

Provide links for TWRP and Graphics glitches
vuk030 said:
http://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/
http://forum.xda-developers.com/xperia-l/development/guide-installing-kernels-roms-xperia-l-t2548498
Click to expand...
Click to collapse
Thank you for the links you provided for the kernels.
If you have the Links of TWRP and Graphics Glitches that would be wonderful.

pankajmahato said:
Thank you for the links you provided for the kernels.
If you have the Links of TWRP and Graphics Glitches that would be wonderful.
Click to expand...
Click to collapse
Unlock your bootloader first.
Then download flastool program.
Then just flash any kernel and you will have CWM/TWRP.... ( the TWRP is in the custom kernel!)
You dont need graphical glitches fix because its all been fixed in newest versions of the roms.

vuk030 said:
Unlock your bootloader first.
Then download flastool program.
Then just flash any kernel and you will have CWM/TWRP.... ( the TWRP is in the custom kernel!)
You dont need graphical glitches fix because its all been fixed in newest versions of the roms.
Click to expand...
Click to collapse
Thanks for your help and quick reply, I am really new into this stuff so I have a lot to learn.