Hi everyone,
Is there by any chance, a cm kernel with high bigmem, 1.2 GHz OC with a GPU OC that runs smooth?
MajorBen1997 said:
Hi everyone,
Is there by any chance, a cm kernel with high bigmem, 1.2 GHz OC with a GPU OC that runs smooth?
Click to expand...
Click to collapse
Not as I know. But there's Marmite, with 1.1GHz OC (w/ FSB/GPU OC) and up to 411Mb of available RAM depending on the version.
Related
Hey people today I flash UC Kernel V08 NOC to my phone DDKP2 2.3.6 but I was not able to see improvement in video recording. I saw in the comments that Chaos and team has fixed only V08 Overclocked version. So i was thinkin why not overclock my phone and then flash OC version.
My question is I have installed NO FRILLS CPU Control.. I Wanted to know what setting should i keep on it and then should I flash V08 OC version! Thanks
anuragvivek93 said:
Hey people today I flash UC Kernel V08 NOC to my phone DDKP2 2.3.6 but I was not able to see improvement in video recording. I saw in the comments that Chaos and team has fixed only V08 Overclocked version. So i was thinkin why not overclock my phone and then flash OC version.
My question is I have installed NO FRILLS CPU Control.. I Wanted to know what setting should i keep on it and then should I flash V08 OC version! Thanks
Click to expand...
Click to collapse
max freq - 1200 mhz
min freq - 300 mhz
i/o schedular - sio
governer - smartassv2
dont set 200 mhz min freq. Phone will freeze.
ok after that can i flash v08 ov version over noc version??
anuragvivek93 said:
ok after that can i flash v08 ov version over noc version??
Click to expand...
Click to collapse
@Dude, Yes you can flash OC version over NOC version - but i believe that currently NOC version is more stable than OC ; However OC will definitely give an inch over NOC in performance.
but in the uc kernel thread I saw that fix has been done for OC version whereas for NONOC version there is not fix....
vishal24387 said:
max freq - 1200 mhz
min freq - 300 mhz
i/o schedular - sio
governer - smartassv2
dont set 200 mhz min freq. Phone will freeze.
Click to expand...
Click to collapse
hey i am only gettin 1.0 mhz option in No frills! what to do!
anuragvivek93 said:
hey i am only gettin 1.0 mhz option in No frills! what to do!
Click to expand...
Click to collapse
buddy first flash OC v08 version & then do that settings. Its so simple...
hi vishal is overclocking harmful to d phone?
also tell me can i get back ti original stock kernel by just flashing stock firmware:xxkpe-->xxkpq.?
burninghouse said:
hi vishal is overclocking harmful to d phone?
also tell me can i get back ti original stock kernel by just flashing stock firmware:xxkpe-->xxkpq.?
Click to expand...
Click to collapse
yes and yes
Agreed.. and Iam Still thinking why do we need 1.2 OC???? anyone?!?!?!
Well, after installing Sch ROM, ICS Theme, and UC-Kernel v8 with OC everything is running super smooth. I'm able to play Dungeon Defenders on highest graphics quality (which is in fact native screen resolution), although my quadrant benchmark has dropped from 2600/2800 to 1500.
Why not? Of course it would be better to have some more frequencys to choose from and i would like to also have additional 1000 MHz as a frequency the CPU is clocked maximum in standard situations and only manually "overclock" to 1.2 GHz in example for gaming.
1.2 ОС-is the speed!
to fasten our phone! althoug I have overcloked but not able to see any major overhaul!
to fasten our phone! althoug I have overcloked but not able to see any major overhaul!
Click to expand...
Click to collapse
have you enabled a cpu managing app like Nofrills CPU control?
you wont really recognize the improvement in daily usage, try out a HD game like asphalt, you WILL fell the difference, (in performance as in battery drain^^)
Is anyone working on an ICS OC kernel? I miss being able to run at 1.4 GHz compared to the stock 1 GHz. ICS seems like it lags a lot more than the HC ROMS I was using, that may be because it's running 400 MHz slower.
no asus has not released the kernel source yet
Hello, i have a quick question
I have installed CleanROM 3.2.1 odexed, and Unters stock Tf300t OC Kernel. I would like to ask how do you guys feel about overclocking your tab? I have installed SetCPU and limited overclocking to 1,5 ghz in performance mode, do you think i could do any damage to the cpu?
I don't think that kernel has overclocking. But I usually do it. Just don't constantly have it set to the Max CPU or it will shorten the CPU life by a lot.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Triger said:
Hello, i have a quick question
I have installed CleanROM 3.2.1 odexed, and Unters stock Tf300t OC Kernel. I would like to ask how do you guys feel about overclocking your tab? I have installed SetCPU and limited overclocking to 1,5 ghz in performance mode, do you think i could do any damage to the cpu?
Click to expand...
Click to collapse
I have mine overclocked up to 1.8 with Clemsyn's and it also turns the GPU up to 650. I personally love the overclock. It goes good with me running Hydro 6.0 with the cranked GPU, I think it's really only good if you have the GPU power to back it up as well. If you want to overclock it higher, check out Clemsyns!
elesbb said:
I don't think that kernel has overclocking. But I usually do it. Just don't constantly have it set to the Max CPU or it will shorten the CPU life by a lot.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
If his CPU is at 1.5 then it's overclocked, stock runs at 1.3
I think that up to 1,6GHz is harmless
lightitwithfire said:
I have mine overclocked up to 1.8 with Clemsyn's and it also turns the GPU up to 650. I personally love the overclock. It goes good with me running Hydro 6.0 with the cranked GPU, I think it's really only good if you have the GPU power to back it up as well. If you want to overclock it higher, check out Clemsyns!
If his CPU is at 1.5 then it's overclocked, stock runs at 1.3
Click to expand...
Click to collapse
I will try Clemsyns kernel now, but what is the stock frequency of the GPU?
Thank you for the replies, i also thought that overclocking to 1.6ghz will do no harm.
Edit: for some reason i can not boot with Clemsyns 1,6 ghz kernel. I used the kernel installer provided by the OP in the cleanrom thread. Any suggestions?
Triger said:
I will try Clemsyns kernel now, but what is the stock frequency of the GPU?
Thank you for the replies, i also thought that overclocking to 1.6ghz will do no harm.
Edit: for some reason i can not boot with Clemsyns 1,6 ghz kernel. I used the kernel installer provided by the OP in the cleanrom thread. Any suggestions?
Click to expand...
Click to collapse
I honestly can't find the stock frequency of the GPU anywhere, but I know its lower than 500!
Also, don't use the kernel installer in the OP of the CleanRom thread. Go into Clemsyn's thread and download the kernel you want to use.
Clemsyn's Thread: http://forum.xda-developers.com/showthread.php?t=1970704
Stock GPU=416Mhz
I say over clocking is doable until 1.6ghz. After that, I don't think it'll be great for the CPU
Sent from my TF300T using Tapatalk HD
kyokeun1234 said:
I say over clocking is doable until 1.6ghz. After that, I don't think it'll be great for the CPU
Sent from my TF300T using Tapatalk HD
Click to expand...
Click to collapse
Mine is at 1.8 and it runs perfectly fine, no issues at all. Got any reasoning to think that it's not good for the CPU?
+1 for overclocking. I'm running the modified Unter kernel for the PA ROM and usually keep mine set at 1.6. Everything just seems to run so much smoother with it turned up.
Sent from my LG- LG855 running MegaTron using Sky blue Tapatalk.
@bindassdost how to overclock processor upto 1.1ghz in you kernel Bindassboost kernel 2.7-4.2 ics out of box
Hi all
Is there any kernels that support overclocking on CM13 for the P3110???
Best regards
Delete
Hmm i can't find slimkernel, but if I try the dhollmen kernel, there is still no OC support, CPU max frequency is 1008 mhz
Ratata82 said:
Hmm i can't find slimkernel, but if I try the dhollmen kernel, there is still no OC support, CPU max frequency is 1008 mhz
Click to expand...
Click to collapse
CandySIX
No dice, it doesn't support OC, already tried that