Database Info

RAM Script and Delvik Heap size anyone?

Has anyone tried this on the Infuse ?
[SCRIPT][19.9.2011] The Best RAM Optimization - Updated!
I also did the following.
Used Root Explorer, and Open & edit /system/build.prop, change dalvik.vm.heapsize= to 80m
Any one confirms this is great ?

Have not tried, might muck around with it later today after i finish my essay. Do you think his script will run on top of DynamicRAM's 99 tweaks? I know the supercharger script didn't play nice with it if you have both installed at the same time.

Didn't notice anything
hey ya'll watch this!!

If this is what I think it is then it is what dynamic rams script is based off of. If it is an init.d script then most likely the parameters that each changes that ate the same will new set to the last commands that runs setting it. Though both may run together it is gonna be mostly redundant. One script will mostly not be applied. Changing the name of the script will determine what runs first. I know the letter s and I think e are used for this but I don't know which is set to run first. Then the number sets the order after that.

(MOD) 108 Triumph & Hollyname B.P Tweaks (4.28.2012) Two Sweet

Ok I’m sure by now most have read the previous Op about losing half my Teeth, all in the back thank the Gods but still can’t wait until I get the fakes bolted in. Sure that will also be an awesome experience, forgot to add that I can’t take pain killers either. Anyhow I originally started working on this Mod for personal use and a means of keeping sanity. Because it ended up working out much better than anticipated I decided to share the script. Since then I have made some changes as I first have learned a little bit more and second because it has expanded beyond its original intention of being made specifically for CM7 and optimized in some areas around my own personal device configuration. Because of this I just decided to kind of give things a Reboot.
What does this Mod do you may ask? In short it just makes everything a little better and snappier! How does it go about doing these things you may ask?
In Short,
IPV4 Internet speed Tweaks,
Chainfire Touchscreen Tweaks,
Increased Cache Sizes,
Defrag Database Files On Boot,
Remove Logger,
Running fewer background Processes,
Set’s Higher Priority for App's like Phone, Launcher, Contacts, SMS, SystemUI & Camera, (Loopy Smoothness)
Two Sweet Edition Changes (04.28.2012)
Linux Laptop Tweaks for Battery Life
Ondemand, Interactive & SmartassV2 Govenor Tweaks
APK Zipalign (Already performed by most Roms but included for the few that do not)
Many more along the same lines.
Again just so it’s clear, I did not develop any of these Tweaks on my own. If any credit should go my way it would be for looking around various websites and inside ROMs for other devices, finding things that look interesting, testing on the Triumph for effectiveness, making minor adjustments if needed and then collecting them into a method that is easy to apply. This should work with just about any Rom with Init.d Support. The easiest way of determining if your Rom has Init.d support would probably be to look at the below directions. If you find an Init.d folder in the spot they say you should then your Rom supports Init.d. It would still be recommended to keep a backup handy as I am not responsible for any damage caused to anything you own.
.
Instructions (Busybox must be installed, if not, download from the Market)
1, Download 108 Triumph Script.
108 Triumph Script (04.22.2012)
http://www.mediafire.com/file/l8x4pyt1u3wfjck/108TriumphScript
108 Triumph Script Two Sweet Edition (04.28.2012)
http://www.mediafire.com/file/77cd8dzdgzmsar1/108TriumphScript2sweet
If for some reason and I noticed this with Dolphin, .txt has been added to the end of the file name after downloading .text will need to be removed or the Tweaks will not be applied. So far I have only seen this happen with Dolphin but no dots should appear in the file name and should be removed.
2, Place file on your SD-card. (USB Dropbox, doesn't matter how)
3, Use Root Explorer or Root Browser Free and move the file into system/etc/init.d folder. (Remember to hit the tab that makes the folder Read/Write as Read Only is the default setting for most File Explorers.)
Root Browser Free if you need a free File Explorer.
http://dl.dropbox.com/u/29969403/rootbrowser.apk
4, Give the file full Permissions.
5, Reboot! (Will take a bit longer to boot and will appear to be held up on the Motorola Logo for a bit. This is nothing to worry about, the script is running and the Tweaks are being applied.)
Clear both Caches in recovery if you have any issues. Should not be needed but have noticed that sometimes Root System Apps like SD-Booster or Auto-Killer when installed before applying the script will restore pre-script values when the restore default settings option in the App is used.
To remove these Tweaks simply delete the file and reboot. To update the file use the file explorer to delete the old version after placing the new version in the init.d folder.
Going forwarded at least for the time being the Build.prop Tweaks can be applied by using the optional Hollyname Script. This was done because to apply these Tweaks correctly as part of the 108 Script with my current knowledge would do either one of two things, permanently add these Tweaks to the Build.prop or make the script Rom specific. Because I’m trying to stay away from having the Mod make any permanent adjustment or have the willingness or time for keeping up with every version of every Rom until I figure a way around the issue they can still be easily applied without making any changes to the Build.prop by following the following.
Additional Build.Prop Tweaks (Recommended)
1, Download Hollyname Build.Prop Tweaks Script and place on SD-Card.
Hollyname Build.prop Tweaks (04.22.2012)
http://www.mediafire.com/file/9f843s9j47czw4z/HollynameBPTweaks
Hollyname Build.prop Tweaks Two Sweet Edition (04.28.2012)
http://www.mediafire.com/file/gzg44q7hho1q8qx/HollynameBPTweaks2sweet
2, Install Script Manager Free from the market.
3, Open Script manager and select the script.
4, Select SU, Boot and then save.
5, Reboot! (All Build.prop Tweaks will now be applied during each boot unless un-selecting the option in script manager or deleting the script from the SD-Card. This will not make any actual changes to your Build.prop. Nor will it effect any properties associated with Market Access.
You Can run "getprop" in either ADB or a Terminal to confirm all current property values if not sure everything was done correctly. If so you should now see the following included among the listed properties,
debug.sf.hw 1
dalvik.vm.heapsize 48
persist.sys.ui.hw 1
ro.max.fling_velocity 12000
ro.min.fling_velocity 8000
ro.ril.disable.power.collapse 1
pm.sleep_mode 1
windowsmgr.max_events_per_sec 150
ro.media.enc.jpeg.quality 100
ro.media.dec.jpeg.memcap 8000000
ro.media.enc.hprof.vid.bps 8000000
media.stagefright.enable-player true
media.stagefright.enable-meta true
media.stagefright.enable-scan true
media.stagefright.enable-http true
net.tcp.buffersize.default 6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.wifi 524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.umts 6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.gprs 6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.edge 6144,87380,524288,6144,16384,262144
net.tcp.buffersize.evdo_b 4096,87380,256960,4096,16384,256960
ro.kernel.android.checkjni 0
ro.kernel.checkjni 0
debug.performance.tuning 1
video.accelerate.hw 1
dalvik.vm.dexopt-flags v=n,o=v
persist.adb.notify 0
wifi.supplicant_scan_interval 180
ro.config.disable_hw_accel false
ring.delay 0

[Q] Why the Android system sounds get stuck at only one song?

My GF have an LG P698 (Optimus Net Dual Chip).
And we have a problem: all songs of alarms, ringtones etc. have the same song.
For example, if you pick a different tune to set as ringtone, any tune, it will be played the first ringtone (let's call xRing).
And if you set a different for alarm the same xRing will be played and placed.
So is like if all the songs are the xRing song.
Almost like if android only get mapped only one tune for everything.
I tried change permissions, wipe DC, delete the songs...
If I delete the xRing.ogg, all phone gets muted.
Is stock ROM and kernel, with tweaks (gps.conf, build.prop), init.d, AutoKiller Memory Optimizer with all tweaks, root, cwm.
The problem started after create the init.d folder (with proper script, not by me, and it works), installed the AutoKiller, and tweaked the gps.conf and build.prop
Any idea? If no, I will be obligated to try a cwm restore, but this is the last resort.
Thanks mates.

GregórioAxiaMagno said:
The problem started after create the init.d folder (with proper script, not by me, and it works), installed the AutoKiller, and tweaked the gps.conf and build.prop
Click to expand...
Click to collapse
Those are a lot of changes. Revert them, & the problem should go away. Then, change them incrementally & see if/when the problem returns.

post-mortem said:
Those are a lot of changes. Revert them, & the problem should go away. Then, change them incrementally & see if/when the problem returns.
Click to expand...
Click to collapse
Ya is a lot. My frustation is, why this start if i don't change anything related? You know... :silly: that laziness.
BTW, thanks buddy, is a nice tip.
Anyone get something similar somewhere?
The killer have a tweak to mount partitions with noatime, I was thinking if could be the cause...
Oh yes, I almost forgot, the phone also have a sdcard partitioned, using link2sd, you know.
hahaha I liked your signature!

[Mod](wip)Audio mods for Beats , Dolby, Srs , plus general info, tips

I
just blew my fricken ears out And dont know what to sah
http://forum.xda-developers.com/and...1-modified-t3429632/post67976756#post67976756
Update
added sony_efect file
backup tips
added bsplayer mod
added onkyo player test
added onkyo player revised
aded to backup and prep
a little more onkyo mod2 info
#################
### ONKYO MUSIC PLAYER MOD 3 V ###
GET THIS MODDED ONKYO PLAYER
ITS FRICKEN AWESOME WITH HUGE BASS
SEE POST 15
################@@#
1 l. I apologize for nor posting this a couple years ago.
i have been screwing with these mods and have somwthing that can totally change what these mods do for you.
i have tips for huge audio that begin even before your ausio mods are even installed.
But i am goin to give you a fat piece of the steak then come back and to the begining
######## edit 1
using these edited files on many different nods i have no need for an equalzer. infact most will destroy the sound these creat.
exept for equalizers at direct source. What i mean is when the app that plays the source file
For music i mostly use the Onkyo player. has an equalizer,upconvert and other cool stuff
For Movies i use a copy of Mxplayer that has a dts patch
Sonetimes i use The Vlc video player has a nice preamp and equalzer.
My experince has been eqalizers aplied down the line destroy The Artists Intentions.
I reco mend disabling all mods and eq to get the true value.
As i write this i have srs and beats files uploaded. turn off dolby maxx and viper4android If you have them Just to see what these do

Backup and prep
most people know about custom recoverys
but often we make edits or changes where the negative effects that dont show up untill after we have new data and stuff we dont want to lose.
Zipme by jrummy can help you greatly.
it can be directed to files and folders it can create a flashable signed replication that can often repair problems without full restore
exanple
flashable backups of soundeffects.conf,build.prop,launcher,framework,systemapps,etc can save you many hassles.
also another huge tip
my recovery twrp has a file manager
example
i have a copy of my build.prop in my system named build.prop.bak
say i made a build.prop edit but wasnt worried or forgot to backup
my edit bootlooped me
i boot to recovery mount system,go to filemanager delete or rename the build.prop then remove .bak from the copy ,reboot,Problem solved.
you cab use this for anything franework ,apps ,init.d
I mod everything so i do bootloop trying things but i can often fix problems without ever doin restore
Another valuable tool
an app nandroid backup manager
it can go into your Backups and extract files and data Even if your backup wont boot
example
Say you flashed a new kernel You forgot to do a backup
Oh **** you flashed a kernel for your other phone .
you are totally screwed
Go ahead make a backup even though it wont boot
once you get a rom installed or firmware flash
you can use the manager to easily get everything you want out of your backups
Prep
i am gonna say all phones have "govenors and Restricters
Most have badass hardware. But none of the software was ever written to get full potential of all high tec hardware
Often just few build.prop edits can make your phones sound much better.
This is different anongst phones but the concept is the same
i have a samsung tab 4 7 inch 4.4.2with marvel processors.No delopment at all for it. There is no api for bluetooth,Couldnt run an eq Well **** that sucks It so fricken quiet i couldnt here a thing even through bluetoot
.i forget exactly what i did but in build.prop was a line telling the system where calibration files are
something like gen cal.db tel/cal/gen_cal.db i forget exactlty
removed the cal files also removed cal applet from System/bin I think the was some crap on nv
well after that my phone wasnt limiting my audio
then while boppin around through my decompiled global.jar i stumbled across something like
playback_resampling=0
well i changed that to a 1
then 20 lines down i see
blahblah_allow srs_processing=0
hell ya i changed to 1
Holy Crap Wow was i surprised.
another common one is
framework res "maybe elsewhere"
blahblah_safe_mediasound=1
changing to 0 reduced phones software limits
If you have this You will see it if you use app like sqlEditor and look in data/data/android.provider/settings
safe_media 3
when disabled will show a 1
OFF TOPIC BUT VERY VALUBLE
amongst global.jar,framework.res or settings apk there is a line
device_provisioned=0 i forget the exact line
change to 1
often when modding or tweaking or just by accident that after a factory reset your phone starts acting Dumb
like home key doesnt work reboot menu isnt all there.
so you have to use sqleditor and correct devisioning in settings table and reboot
if you change this as i explained this will never happen to you

Srs
for those that know what they are doing.
uzip these. srsprocessing goes in system/etc/srs
the two truemedia files go in system/etc/soundimage
REBOOT
depending on your specific mod truemedia files may be in system/etc and not in a soundimage folder
these will add huge huge bass to your srs while using BLUETOOTH
Be careful some small speakers may tear or simply RUN AWAY
amTruemedia i have decreased compression and windows. Added gain and added huge place holders to bass mins
srs_processong decreased compression and window dropped freq to 55hz and added gain
you will need a min of 90 mb free in system
these took hours and hour to make as i dont have a computer so all was done from my phone. just to load a file in jota takes 5 minutes then another 5 to insert aditional lines
Anybody with a comouter can open these up and make these sounds four times increased than what i have
ps. on the srs_processing file i got tired and stopped editing. So the 55hz is more inxreased in the video aspect. But this is just the surface anybody can modify these.
Its possible for audio mod creators to package these in there mods already
also with addin huge boost at srs level its likely that some dolby and max will tone these down. Try turning them off in build prop to see. Such i have down. i shut max complely off except for dts ,also i have dolby off as well.
And you can make huge eq to these wirh edits turni on eq turn on all bands,add gain and add placeholders to band mins

beats
This is my next project, but maybe somebody here can play with it
there the beats files Extract and put to system/etc/tfa REBOOT
Some beats mods have more eq files than these
you can likely use these settings by makin copy and renaming

Dolby and Sony
these can give you huge sound if your audio mod uses it.
the folder is system/etc/sony_effect
unzip and replace yours with mine and reboot.
Still to come
Abother huge dolby mod Huge sound .It was very tricky to get to work right will dolbys tuning,ak parameters and clamps. But i did managed to get around it all
I package it for you with an explanation soon

Maxx

7gill said:
beats
This is my next project, but maybe somebody here can play with it
there the beats files Extract and put to system/etc/tfa REBOOT
Some beats mods have more eq files than these
you can likely use these settings by makin copy and renaming
Click to expand...
Click to collapse
I think i'll try this... XD

One question: Why the file size of these are times 1000 the size of any srs configs i have known?

i am trying to make use of all the intelligenxe on these files.To be real about your question. Most audio mods you see are a ton of files put together All having big names."sony,etc" i have been able to use them for what i want.
i havent found any other way to get the sound i want.
The files are so big because sound has been added to them.So far the only way i have learned to do so is by increasing values and file size is the cost.
The srs files have Huge bass boom that is very clean if the system runs properly.
I want to spend alot of time to explain everything. I am homeles and do everything from a phone. I have a weird life and get side tracked often .
If people here knew what i have learned Audio mods would be changed forever.
i have a 49 dollar samsung light and a shark bluetooth speaker that sets the air on fire when i play music and videos.
i have mods and edits for alot of various mod packs.
Again i apologize for not giving you everything i know.
Hey i just noticed by removing the small srs lic files increases my output.
I will get two dolby files up here tonight, They are big files also. But if setup right will make your phone a movie theater

i am hoping someone will test this.
I have gotten this onkyo app to run its equalizer on 50 bands
on my little phone. it required a little data manipulation
Now trying to make it apart of the app
This is weird since Onkyo has alot of signature crapThe gains are already set to 12
install and turn eq on . then raise the eq bar up.
Honestly i have alot of system edits that i am unsure of how
much this does alone.its sounds fuc****in great on my phone
Edit
had to upload this in another post for some reason
Scroll down to get file

if you use Bsplayer
in its settings you can raise presmp to 500 percent
thats great when you files low in sound
Want even more?
in its data folder Shared prefences
these will give you even more
this is the preamp string bsplayer uses to tell its preamp what to do
the app only gets it to 500
i changed to 1000 Bam signifacant gain
<string name="papreamp">1000</string>

here it is
if this works correctly you will have a 50 band equalizer set at full. turn on eq and raise its bar
i am not sure whats gonna happen if you start adjustin individual bands. i may work on this more
if this doesnt work right i can give you my data files
Edit
i am uploading another copy that doesnt bother plist
If you try this
results are more valuable thank yous
i dont have anyone to test And my phones are so tweaked with audio crap i dont need more,But i want it if i can make it.

onkyo mod2
to make this more clear
the eq comes stock with 11 bands that are set to 0
you use the apps eq to modify
i rewrote the eq file with 50 bands and set gain to 12
so the app is running the file as written but isnt aware of what its doin
Originally i just the bands in its data folder which made it temporary. Tryin to get it a permanent mod
##
I think the way i did this the app applies band gains even with eq off
not sure
Let me know how this works for you

1 Anybody here want to work on an audio mod package
I especially need someone who is good at adding libraries to the sound conf also creating flashable scripts
After trying many audio mods i havent found 1 i am totally happy with..
2
i am using a copy of
_UNIVERSAL__HTKaudio_2016
basically its another decent audio mod
I have it to make my speaker blow smoke
i even get deep base like them cars drivin by.
i hsve s shark bluetooth speaker .the 15 watt one made of metal. its pretty heavy. Well i get it to hop around .
If you want to try sonething new I will take time to give you step by step instructions And all the modded files
to have badass audio on your phone
Nothing compares to it at all. The phones like Htc these files come stock on are weak.
Since theres nothing close .Its a little chore
i have done the most the time comsuning work
You will just need to flash the htk mod All the edited files i have and a little time to make edits and replace files
If you do You will ask yourself why this Sh** been around for years but never sounded like this

You have got to this
MY third rendition of Onkyo music player
Holy crap
This little bastard puts out alot of sound with tons of bass
Unzip and install.
if you already have a copy installed Delete data after updating
PLEASE POST ANY RESULTS YOU HAVE
tThanks

7gill said:
here it is
if this works correctly you will have a 50 band equalizer set at full. turn on eq and raise its bar
i am not sure whats gonna happen if you start adjustin individual bands. i may work on this more
if this doesnt work right i can give you my data files
Edit
i am uploading another copy that doesnt bother plist
If you try this
results are more valuable thank yous
i dont have anyone to test And my phones are so tweaked with audio crap i dont need more,But i want it if i can make it.
Click to expand...
Click to collapse
50 Band--unbearable screech. What's that? Why are all the Mod.O.HF.players same size after your modifications? Anyway, fyi, sound in a little better without FeaturedEQ.

[Mod] Audio-"Unleashed1" dolby sony

Yes,i am going to give you an audio mod for your phone,but first some information usefull for everyone.
What i have is not a " release of my work" so much as just sharing what i am using know, as i change and tweak on a daily basis. Its so very unique and powerful i want to share it. I am not finished but thats ok. a few changes then i am gonna do something different.
Its called Unleashed because i have released the true power . its unleashed 1 because i have a plan that will be even more powerfull, i will share when its done.
most mods you will get seem to me be as many effects and stuff crammed into a package.
if you study them, nothing is utilized and often working against each other.
like a bunch of engines set at slightly above idle.
I can install almost any mod package found on this site and in minutes make it more powewrfull than imagined.
2 points right here
srs is tiny in size but is a HUGE POWERFUL bit of software
i can make a nice full mod using nothing but srs. wont have all the effects but huge quality sound.'1to3 l;ibs and 1 cfg file3'
problem, most srs files arent configuered to do much,infact some may conflict. like setting minus gains where others are trying to add gain
If you develop and release mods, imay be able to help you make your stuff more powerful and unique.
if you have mods installed i can help you tune it to get the sound you want.
So i am going to explain what i have as of right know.
i live outside basically and cant set up my laptop or use net alot so forgive me if dont get everything at once
infact for me to give you all what i have may take awhile so if this interests you i advise to check back regurlarly
To think as i do
E#ven the most baddass mod you can get made by someone doin it for years.
Look at it as an "Audio BusyBox"
They are audio applets that can be configured to do what you want
ok what i have is a couple mods that most mod guys throw into there packages to get more labels or icons , but really there not configuered and you wouldnt even notice if they werent even there.
so i have dolby atmost 1.4.1 as the core. yeah everybody has that.
i changed it to run at 60 bands giving you a very smooth sound that may be worthy of you badass onkyo integra thx50000zcr
now to enhance the lowend i have dolby digital plus set to run 20` band eq starting at 40hz up to 500hz
this is the hardest to reproduce `Your twin 12inch velodynes might apreciate this tiny spacing in frequency sampling.
next i have xloud at srength 6
then comes clearaudio configuered with a bit of gain at the lowend. this adds bass and Clarity
thats basica.lly it theres qcbass and i used the beats lib and sony pre and post effects
honestlyi am still learning as i go so maybe not perfect but i learned alot in making this, maybe different proxys can be better, but i dont really know how to get uuid and proper proxy use, i may have mistakes but have got enough right to make great sound almost theatre like on my bluetooth hdmx chill. this little speaker was crap when i bought, with this mod it somehow sounds great.
if this doesnt get quite what you want you can actually drop a few files on your computer and make the sound you want.
even if you dont use what i have you can take files from almost any mods you have now and modify them to your needs.
So i have no clue how to make flashable update scripts like most mods you get, so i am gonna use zipme.apk by jrummy to make a flashable package, you will need to add a few lines to your` build prop.
zipme is sweet app you can make flashaple pack of build.prop audio effects files, framework, apks, almost anything.
so my eyes are getting sore and tired and i need to stretch ,i am sitting outside a closed cofee shop using there electricity.and my leg is falling asleep and throbbing
i am gonna make a list of all the files i need to zipme and the few build.prop lines you need. i will have these all for you when i come back, if not tonight for sure in the morning,
oh before i go,You will need alot of system room to use this, i will add it all up but at least 200meg prolly abit more
Back now, look its fricken freezin now here, so about to pack up and go to my sorta spot to sleep, but i have a feww more notes for you
t6he two dolby mods have apps, the apps write your settings to there data folders, the ui apps read the settings from the service apps folders, the problem is that the preset gains are so big that it cant handle so the data files are empty this causes the ui apps to not function,.therefore neither has an ui, also for both the preset gains are to large that activating the leveler actually reduces the gain, untill i learnb java and smal;i to be able to modify the apps i cannot do anything about, i deactivated the optimize and tuning features also because this will reduce my presets, virtualizer is deactivated, also to preseve settings, these two dolby are basically equalizers only but set at huge gain in comparisuion to what the ui apps are able to do, plus even if the ui operated correctly the ui app isnt configuered for 60 bands so would oprate right,agauin i could probably correct all this with knowledge of java and ability to interpret smali files.
so there is no real time equalizer as of now, but i will teach you easily to make files to change settings t5hat just need reboot
also in order to make this more universal i removed somethings that came with my phone like mysound and soundalive, as i have no clue what to include to make work on your phone, plus i doubt it really matters.
also in am going to try to incl;ude extra audioeffects.confs i have, by simpl;y vreplacing the audioeffects conf you can ru8nj only the 60band eq, 60band with xloud, 60band with xloud and cleraraudio various combi8nations to get what you want,
i am tired and typing reall bad, gona take off, i will have your mod to play with tomorrow after i wake up and get some coffee and find some wifi, plus i may try to find the virtualizer effect i was trying yesterday. i added 3 at once and didnt like it, but theres one that goes well this.
over n out
#
back now
almost ready adjusted a few things this is pulled from my tab that i used to create it. tab4 7inch t237p 4.4.2
assume it will work on most phones but i cant guaranty anything
assume we all know about backups
if you use zipme.apk to backup system/lib/soundfx folder and audio_effects.conf you will be able to flash those easily be back to normal .
if you have any srs folders in system/etc or system/data remame them somehow like adding an "A" to the beginning of the folder. that way to stop any conflicts with what i have for you.
i recommend removing all existing mods eq and soundfx and dsp managers. but thats up to you.
So the file is going to be a zip file
unzip it Will be a text file you need to add to build prop for xloud and clear audio.
the other will be the flashable zip that will add the 2 dolby service apps to system/app the ds.default xmls to system and system/etc the xloud and ckearaudio stuff as system/etc/sound/effects 5hen srs file to system/etc/soundimage ,replace your audio_effects.conf and add libs to your system/lib/soundfx folder
i think thats it . I will have more like a 40 band flat cfg and others to help contour your new mod to acamadate your needs. But first i got the main pack up before it rains.
which i think its gonna . Be
#i recomend a dalvic and cache wipe
THERE WILL BE NO MISTAKE OR DOUBTS HERE YOU SHOULD BE ABLE TO TELL IF IT WORKS IMEDIATLY WHEN YOU START A MOVIE OR MUSIC.
Please post results sovi know i packaged it correctly.
#in system/etc/dolby/presets i included a 40 band eq preset for you . because of 20 less bands there was room for each band to have higher gain
the loaded cfg is 60 band what i call 350 flat the zip is a 500 flat at 40 bands . i zipped it to save room incase you are low in system space. unzip to sdcard if you want.
i have a couple more like a 30 band and various gains i can dig up
Or
if you are wanting just ask, i will show you how to make your own,same with srs and clearaudio
i use zipme to make these flashable. you can flash one pack and change all these in 1 minute. Say you have presets for your bluetooth carkit,another set if cfgs f9r your home stereo,another for your portable bluetooth. Or anything else. the files are pretty easy to make and use.
also once you have a collection you can download almost any mod you find,paste or flash your files and Bam, your mod is enhqnced 20 fold in minutes.
AS son i get a chance i will add adjust clearaudio and change the whole way Srs runs. Those will be simple changes on your end, copy paste or just flash. Both will be nice upgrades. Also i am trying to learn more about audio_effects.conf
i maybe able to get more out of this with more knowledge of proxy uuid and effects
If you know about this maybe take alook at what i have done. iam trying things i havent seen anywhere else. so its hit and miss.