[Q] out of service/network unknown/disconnected HELP!! - Motorola Atrix 2

Ok, it's rare that I ask for help but I am baffled!
Phone is carrier unlocked and will not recognize ANY sim card
There are NO APN's shown
NO PHONE NUMBER
network:unknown
Mobile network type: unknown
Service State: out of service
Mobile Network stateisconnected
If I try going to network settings and scan available networks I get a "Connection not available"
WiFi works
It's like the Radio is stuck OFF??
1.Lent my Atrix 2 to a friend running perfect on 2.3.6,they got the "update available message" and said ok- update failed phone bootlooped crashed etc.
2. I have managed to get it running but on everything 2.3.5,2.3.6 and currently installed inlineflashing_edison_67.21.125_cfc_p3_apbp.xml.zip
3. Current Device info:
A.system version: 67.21.125.mb865.att.en.us,
B.firmware configuration version: GAS_NA_EDSNICSATT_P006
C.Baseband:2012-07-26 12:10 off.Bld
LUD_EDISON-R1D7_PATCH-49_120726_1154
crh1090280_M570_PC_CARD_RAIN
D.AP flex version: GAS_NA_EDSNICATT_P006
E.Build Number; 6.7.2-226-EDICS-10
F.Build Date Fri Aug 31 18:50:08 CDT 2012
Phone is rooted so I can excute any repairs/fixes suggested
ANY help would be appreciated !

dadp2 said:
Ok, it's rare that I ask for help but I am baffled!
Phone is carrier unlocked and will not recognize ANY sim card
There are NO APN's shown
NO PHONE NUMBER
network:unknown
Mobile network type: unknown
Service State: out of service
Mobile Network stateisconnected
If I try going to network settings and scan available networks I get a "Connection not available"
WiFi works
It's like the Radio is stuck OFF??
1.Lent my Atrix 2 to a friend running perfect on 2.3.6,they got the "update available message" and said ok- update failed phone bootlooped crashed etc.
2. I have managed to get it running but on everything 2.3.5,2.3.6 and currently installed inlineflashing_edison_67.21.125_cfc_p3_apbp.xml.zip
3. Current Device info:
A.system version: 67.21.125.mb865.att.en.us,
B.firmware configuration version: GAS_NA_EDSNICSATT_P006
C.Baseband:2012-07-26 12:10 off.Bld
LUD_EDISON-R1D7_PATCH-49_120726_1154
crh1090280_M570_PC_CARD_RAIN
D.AP flex version: GAS_NA_EDSNICATT_P006
E.Build Number; 6.7.2-226-EDICS-10
F.Build Date Fri Aug 31 18:50:08 CDT 2012
Phone is rooted so I can excute any repairs/fixes suggested
ANY help would be appreciated !
Click to expand...
Click to collapse
Try a factory reset, if no good flash one of the roms in the dev section.... worth a shot.....
From my locked down superchargedV6 1.425ghz A "What tha duce?"

daavvis said:
Try a factory reset, if no good flash one of the roms in the dev section.... worth a shot.....
From my locked down superchargedV6 1.425ghz A "What tha duce?"
Click to expand...
Click to collapse
Factory Reset-didn't work!
What custom rom would you suggest I try ? I did try the CM10 and it stuck on the Cyanogen Circle screen, I doubt a custom rom will make any difference . but it cannot hurt !!
Are there "dialer codes" for this beast ?
Where in the file system is the radio settings??
I am very close to giving up on this unit and renaming it the Atrix 2 Media Player Edition

Any one?

dadp2 said:
Factory Reset-didn't work!
What custom rom would you suggest I try ? I did try the CM10 and it stuck on the Cyanogen Circle screen, I doubt a custom rom will make any difference . but it cannot hurt !!
Are there "dialer codes" for this beast ?
Where in the file system is the radio settings??
I am very close to giving up on this unit and renaming it the Atrix 2 Media Player Edition
Click to expand...
Click to collapse
Try the fsz again, this time the ics one.... other than that its def possible its broken...
From my locked down superchargedV6 1.425ghz A "What tha duce?"

Related

[Q] Need Help on Nexus S 9023 signal problem

Hi all,
I just got a new NS 9023.
When I got it, the system was 2.3.6(I dont remember if that is official or not)
After some simple tests, I flash the rom to MIUI. And MIUI works fine.
One day later, I want my phone go back to official rom. So I download a 2.3.3 official rom from google.(The link was found on this forum)
Then the problem came - The signal is worse then before. I can't get EDGE, but before I flash the "official rom", EDGE works well. i tried lots of baseband packages but none of them works.
Can someone tell me what should I do now?
Here are some information:
product name herring
hw version: rev 52
bootloader: i9020xxka3
baseband: i9020xxdk1
carrier info: vof
A friend of mine bought a 9023 the same time as mine.
I checked his bootloader, only one different is the carrier info, it is EUR on his phone.
check the IMEI number and see whether it's true or not ?
system -> about -> status
X1111 said:
check the IMEI number and see whether it's true or not ?
system -> about -> status
Click to expand...
Click to collapse
Baseband seen from system is I9023XXKD1, which I consider is correct.
and signal strength usually between -83 ~ -93dBm both in office and outside.
Also, I found a radio dump bin on sdcard. Is there any way I can use that file?
baileifirst said:
Hi all,
I just got a new NS 9023.
When I got it, the system was 2.3.6(I dont remember if that is official or not)
After some simple tests, I flash the rom to MIUI. And MIUI works fine.
One day later, I want my phone go back to official rom. So I download a 2.3.3 official rom from google.(The link was found on this forum)
Then the problem came - The signal is worse then before. I can't get EDGE, but before I flash the "official rom", EDGE works well. i tried lots of baseband packages but none of them works.
Can someone tell me what should I do now?
Here are some information:
product name herring
hw version: rev 52
bootloader: i9020xxka3
baseband: i9020xxdk1
carrier info: vof
A friend of mine bought a 9023 the same time as mine.
I checked his bootloader, only one different is the carrier info, it is EUR on his phone.
Click to expand...
Click to collapse
At the top you say you have an i9023 but your bootloader and radio are i9020. So which is it? Is your problem because you flashed your phone with a stock rom for a different model?
Sent from my Nexus S 4G using xda premium
Don't post your IMEI in public. I suggest you remove it. X1111 just wanted to check if your IMEI is changed, but that as nothing to do with your problem. Because if that was a problem, you couldn't get any signal at all.
As I can see, you are surely cofused which device do u have, and therefore flash wrong ROM/Radio. Did you try *#*#4636#*#*? If not try dial it, choose "Phone information", pres menu button, choose "Select radio band" and choose EUR band...
If that doesn't help you, wipe /data /cache and /system in recovery and flash correct stock rooted ROM. Hope that will help...
yes. i have a 9023 device and all 9023 around me have 9020XXKD1 information on boot screen.
Sent from my Google Nexus S using XDA App
Thanks tenhi.
I tried 4636 code and change my baseband to EUR. seems better now. but still not so good. i will keep testing.
Sent from my Google Nexus S using XDA App

[q] telus update 2.3.6 (no service)

Hey there,
I'm with TELUS (Canadian provider) and I have the nexus s, there was an update on my android and then after that... my phone didnt have any service! It wouldnt let me find TELUS network selection or manual selection and no service wouldnt able to show except wifi works... so I'm guessing google gave me the wrong update for my phone or what? I tried to research for HOURS and nothing.. its really annoying..
Android Version 2.3.6
Baseband Version NO DGSXXXKF1
BUILD # GRK39F
its not rooted or anthing... just a stock software... hope someone can help me out there... really appericate it
keegygti said:
Hey there,
I'm with TELUS (Canadian provider) and I have the nexus s, there was an update on my android and then after that... my phone didnt have any service! It wouldnt let me find TELUS network selection or manual selection and no service wouldnt able to show except wifi works... so I'm guessing google gave me the wrong update for my phone or what? I tried to research for HOURS and nothing.. its really annoying..
Android Version 2.3.6
Baseband Version NO DGSXXXKF1
BUILD # GRK39F
its not rooted or anthing... just a stock software... hope someone can help me out there... really appericate it
Click to expand...
Click to collapse
This worked for me, at least as far as data goes - in the same place where you choose network operators, choose the option for "access point names" then, when there, if there is no option for Telus, try pressing the menu button and clicking the option for "new APN" then in the fields enter the following:
- Name : TELUS
- APN: sp.telus.com
- Proxy: 74.49.0.18
- Port: 80
And then press the menu button again, hit save, and click the APN out of the list to connect.
That helped when I couldn't connect to Koodo, and they're the same network.
Hope this helps!
keegygti said:
Hey there,
I'm with TELUS (Canadian provider) and I have the nexus s, there was an update on my android and then after that... my phone didnt have any service! It wouldnt let me find TELUS network selection or manual selection and no service wouldnt able to show except wifi works... so I'm guessing google gave me the wrong update for my phone or what? I tried to research for HOURS and nothing.. its really annoying..
Android Version 2.3.6
Baseband Version NO DGSXXXKF1
BUILD # GRK39F
its not rooted or anthing... just a stock software... hope someone can help me out there... really appericate it
Click to expand...
Click to collapse
Hi, Did you manage to find a solution. I have a Nexus S 9020T and been using it fine under Fido/Rogers (WIthout 3G). Now that I moved swapped SIM to TELUS. it won't detect the TELUS network or connect to any. Any help would be appreciated.
Seeing how it says no radio you probably have to flash a radio for the i9020a, most likely UCKF1.
Sent from my Nexus S using XDA App
Provider: TELUS
version: 4.0.3
Baseband: I9020XXKI1
Build: IML74K
Phone was working perfectly fine before the switch to Telus. Even after reinserting the Fido SIM, phone will not connect to network.
Please assist.
My dads with telus... put his sim in my phone and no service but my rogers sum is still working fine... weird :S
Sent from my Nexus S using XDA App

[Q] No Sim Detected after ROM update

Sorry if this has been covered somewhere, but I read through a lot of posts and none of them seem to be the same thing I am seeing.
I upgraded from the RemICS 1.3.1 to the JB v2 , and now my phone no longer sees any SIM card I put into it. I have tried multiple SIM cards, none of them work. I reinstalled back to froyo, and could see my SIM card. Then I went to gingerbread, could still see it, then I installed this ROM, and the SIM card is once again unavailable.
I have tried using a few different modems, but they do not seem to be making any difference. Any ideas?
This is what I see after I install the JB v2 ROM:
Model Number SGH-i897
Android Version 4.1.1
Baseband Version unknown
Kernel Version 3.0.31-Semaphore_JB_2.0.6sc [email protected]) #55 PREEMPT Wed Aug 22 22:17:31 EEST 2012
Slim Version Unknown
Build Number Remics-JB 2.0
Under Status
Network Unknown
Signal Strength 0 dBm 99 asu
Mobile Network type Unknown:0
Service State Out of Service
Roaming Not roaming
Mobile Network State Disconnected
My phone number Unknown
IMEI SV Unknown
Can You repeat the process?
repeat process
Deluxxxe said:
Can You repeat the process?
Click to expand...
Click to collapse
Yes, I was able to repeat the process. I went back to Froyo, then upgraded to GB, then to JB. Same issue.
I also want to clarify, I cleared all cache before installing each ROM. I also tried clearing cache after installing the ROM, but it made no difference. I even went so far as to use the advanced option for formatting the different folders /boot, /system, etc., then doing the reinstall from Froyo, but that made no difference either. I stopped short of formatting the entire internal SD card since I didn't think this was the problem.
Hello mate,
it happen the same for me. I solved the problem following the instruction in this link:
http://www.androidfamily.net/2012/0...g-galaxy-s-gt-i9000-via-remics-jb-custom-rom/
Once you have installed it, you can recheck the sim lock box. It workded for me.
Good luck!
farkld2 said:
Sorry if this has been covered somewhere, but I read through a lot of posts and none of them seem to be the same thing I am seeing.
I upgraded from the RemICS 1.3.1 to the JB v2 , and now my phone no longer sees any SIM card I put into it. I have tried multiple SIM cards, none of them work. I reinstalled back to froyo, and could see my SIM card. Then I went to gingerbread, could still see it, then I installed this ROM, and the SIM card is once again unavailable.
I have tried using a few different modems, but they do not seem to be making any difference. Any ideas?
This is what I see after I install the JB v2 ROM:
Model Number SGH-i897
Android Version 4.1.1
Baseband Version unknown
Kernel Version 3.0.31-Semaphore_JB_2.0.6sc [email protected]) #55 PREEMPT Wed Aug 22 22:17:31 EEST 2012
Slim Version Unknown
Build Number Remics-JB 2.0
Under Status
Network Unknown
Signal Strength 0 dBm 99 asu
Mobile Network type Unknown:0
Service State Out of Service
Roaming Not roaming
Mobile Network State Disconnected
My phone number Unknown
IMEI SV Unknown
Click to expand...
Click to collapse
Thank you! I will give it a try adding this step to the process. I am assuming it is the same even though mine is the i897 instead of the i9000. I'll report back on my experience.
Disable SIM lock of your Galaxy S GT-I9000 by going to “Settings > Location and Security > SIM Card Lock”.
farkld2 said:
Thank you! I will give it a try adding this step to the process. I am assuming it is the same even though mine is the i897 instead of the i9000. I'll report back on my experience.
Disable SIM lock of your Galaxy S GT-I9000 by going to “Settings > Location and Security > SIM Card Lock”.
Click to expand...
Click to collapse
I went into Settings > Security > and i see Set up SIM card lock. It is already disabled.
I was able to get it to work. WOOT!
I am not sure exactly what did it, but I think this is it...
Based on the SIM lock not being set, I decided to start messing around with it and I ended up locking the SIM using a key code from the number pad. Woops, didn't really mean to do that, but I was following some instructions on how to unlock the phone completely. Well, the only problem I had from there was I couldn't get the unlock code...I rebooted my phone and did a recovery. However, even after recovery, my phone noticed that something had changed with the SIM and I was prompted for a PUK code. Fortunately, you can get this from the AT&T website. So I logged in, did the code, my phone was now unlocked. I went into the settings and looked and the SIM card was now set to locked. I unchecked the box and unlocked it. Then I did the upgrade again and it worked this time.
Thanks again for your suggestion!
I have a LG Stylo 2 an it's doing the same how can I fix this it's showing no signal an no sim

[Q] HELP! I need to flash a modem if anyone can help?

Ok well, I got my replacement Moto G and everything was working ok on 4.3. Then I decided to manually flash Kitkat through adb after unlocking the boot-loader, and now I'm getting no service at all. lol. Um, yea So I have flashed the same firmware on the original Moto G that I had and had no problems flashing it. I don't know why I'm not getting any service on this one? I forgot to mention that I twent back to 4.3 through adb seeing that might of helped and did the kitkat upgrade after, and nada!
Baseband Version: MSM8626BP_1032.340.63.00b
System Version: 172.44.4.falcon_umts.Retail.en.US
Build number: KXB20.9-1.8-1.4
Under status I'm getting Unknown Network, Mobile Network type Unknown, Service State: Radio off, Mobile network state, disconnected, Bluetooth address unavailable. That is what is missing under those sections. I'm assuming it has something to do with the radio/modem. If anyone has one they can let me flash for the Retail US version, I would highly appreciated. :good: Thank you for your help!
maybe a solution
asheehanjr said:
Ok well, I got my replacement Moto G and everything was working ok on 4.3. Then I decided to manually flash Kitkat through adb after unlocking the boot-loader, and now I'm getting no service at all. lol. Um, yea So I have flashed the same firmware on the original Moto G that I had and had no problems flashing it. I don't know why I'm not getting any service on this one? I forgot to mention that I twent back to 4.3 through adb seeing that might of helped and did the kitkat upgrade after, and nada!
Baseband Version: MSM8626BP_1032.340.63.00b
System Version: 172.44.4.falcon_umts.Retail.en.US
Build number: KXB20.9-1.8-1.4
Under status I'm getting Unknown Network, Mobile Network type Unknown, Service State: Radio off, Mobile network state, disconnected, Bluetooth address unavailable. That is what is missing under those sections. I'm assuming it has something to do with the radio/modem. If anyone has one they can let me flash for the Retail US version, I would highly appreciated. :good: Thank you for your help!
Click to expand...
Click to collapse
try this:
1. open dialer
2. type this: *#*#4636#*#*
3. open Phone information
4. scroll down and tap "Turn on radio"
if nothing happened, try reboot... is it working?
2hipso said:
try this:
1. open dialer
2. type this: *#*#4636#*#*
3. open Phone information
4. scroll down and tap "Turn on radio"
then reboot... is it working?
Click to expand...
Click to collapse
I did try it and it didn't work for me but, I re downloaded the Android 4.4.2 Blur_Version.172.44.4.falcon_umts.AWSRetail.en.US and flashed it via adb and, I switched the msfastboot modem 1 and 2 did that before flashing the modem NON-HLOS.bin and have everything working now. Phew. lol. Thanks for your help dude. Will note your method for future use. Thanks again! :good:
i dont know what are you talking about but
asheehanjr said:
I did try it and it didn't work for me but, I re downloaded the Android 4.4.2 Blur_Version.172.44.4.falcon_umts.AWSRetail.en.US and flashed it via adb and, I switched the msfastboot modem 1 and 2 did that before flashing the modem NON-HLOS.bin and have everything working now. Phew. lol. Thanks for your help dude. Will note your method for future use. Thanks again! :good:
Click to expand...
Click to collapse
you're welcome
asheehanjr said:
I did try it and it didn't work for me but, I re downloaded the Android 4.4.2 Blur_Version.172.44.4.falcon_umts.AWSRetail.en.US and flashed it via adb and, I switched the msfastboot modem 1 and 2 did that before flashing the modem NON-HLOS.bin and have everything working now. Phew. lol. Thanks for your help dude. Will note your method for future use. Thanks again! :good:
Click to expand...
Click to collapse
So you reflashed everything and what lines did you use or changed in fastboot?
Need Help. I cant turn on my WIFI !!!!
Hello. I have issue with my WiFi connection in my Moto G. I flashed 2 times 4.4.2 stock roms and nothing. I also downgrade to JB and always cant turn the WiFi button to ON in settings. PLZ HELP ME !!!
---------- Post added at 10:58 AM ---------- Previous post was at 10:46 AM ----------
How you do that. I have identical issue with my Moto G . PLZ HELPPPPPP !!!!!
:crying::crying::crying::crying:
;(
Sharwin said:
Hello. I have issue with my WiFi connection in my Moto G. I flashed 2 times 4.4.2 stock roms and nothing. I also downgrade to JB and always cant turn the WiFi button to ON in settings. PLZ HELP ME !!!
Please. Anybody can help me, which lines I must change. I work on this phone yesterday more than 10 hours and nothing. I need help !!!!!!1 :crying:
Click to expand...
Click to collapse
Read here
Same issue as OP Help.
I am having the same issue as the OP. I tried to install modem 2 before 1 the way OP stated. But I still cant get any service on my phone. I also have the 1034 version of the device suited for T-Mobile. I tried to flash the stock radio as well but Im not getting any service. If someone knows what the issue is please help.
By the way my wifi is working just fine. Its the network I cant connect to. I tried my sim card and it work in another phone.
Thank you for any help.
I'm also having the same problem. I have a US global model XT-1032 Moto G. No matter what the heck I try to do the radio always stays off on the phone. It worked fine prior to the 4.4.2 OTA update.
I've tried flashing just the modem from the 4.4.2 and 4.3 US firmwares for both the XT-1032 and XT-1034 versions and neither of them work, it always shows the network as unknown and the radio being turned off.
I have even tried erasing the modemst2 then modemst1 in that order and then flashing the modem with the non-hlos.bin file hoping that if I did it in reverse to the normal order it would fix the issue.
The sad thing is that since I unlocked the damn bootloader to do this, now I can't get any kind of warranty repair done on it by Motorola.
doctor_evil said:
I'm also having the same problem. I have a US global model XT-1032 Moto G. No matter what the heck I try to do the radio always stays off on the phone. It worked fine prior to the 4.4.2 OTA update.
I've tried flashing just the modem from the 4.4.2 and 4.3 US firmwares for both the XT-1032 and XT-1034 versions and neither of them work, it always shows the network as unknown and the radio being turned off.
I have even tried erasing the modemst2 then modemst1 in that order and then flashing the modem with the non-hlos.bin file hoping that if I did it in reverse to the normal order it would fix the issue.
The sad thing is that since I unlocked the damn bootloader to do this, now I can't get any kind of warranty repair done on it by Motorola.
Click to expand...
Click to collapse
I wanted to report that I fixed my problem with my moto-G, it turned out to be a XT-1034 instead of a XT-1032. I posted a blog post with a link for downloading the file that I used to fix the problem. Basically what I had to do was flash the 4.4.2 modem for a Retail GB model moto-G. This fixed the problem. here is the link http://doctorevil30564.blogspot.com/2014/06/how-to-fix-motorola-moto-g-xt-1034-that.html
UPDATE: the Retail US 4.4.3 factory image from here Blur_Version.210.12.32.falcon_umts.AWSRetail.en.US fixed the radio on my XT-1034 so no need to use the previous method if you are having the same issue, just try flashing that version on your XT-1034
hi Guys ... i am having this same issue ....
I am on Android 4.4.2
Baseband version : MSM8626BP_1032.340.63.00R
System Version: 174.44.9.falcon_utms.TescoSL.en.GB
Build number: KLB20.9-1.10-1.9
In Status I have
Network : unknown
Mobile network type : unknown
service status : out of service
I've tried flashing stock 4.4.2 over adb but nothing happened
doctor_evil said:
I wanted to report that I fixed my problem with my moto-G, it turned out to be a XT-1034 instead of a XT-1032. I posted a blog post with a link for downloading the file that I used to fix the problem. Basically what I had to do was flash the 4.4.2 modem for a Retail GB model moto-G. This fixed the problem. here is the link http://doctorevil30564.blogspot.com/2014/06/how-to-fix-motorola-moto-g-xt-1034-that.html
UPDATE: the Retail US 4.4.3 factory image from here Blur_Version.210.12.32.falcon_umts.AWSRetail.en.US fixed the radio on my XT-1034 so no need to use the previous method if you are having the same issue, just try flashing that version on your XT-1034
Click to expand...
Click to collapse
hi Guys ... i am having this same issue ....
I am on Android 4.4.2
Baseband version : MSM8626BP_1032.340.63.00R
System Version: 174.44.9.falcon_utms.TescoSL.en.GB
Build number: KLB20.9-1.10-1.9
In Status I have
Network : unknown
Mobile network type : unknown
service status : out of service
I've tried flashing stock 4.4.2 over adb but nothing happened

No CDMA (GSM/LTE) after typing *#0909# and selecting option in DIAG CONFIG

Hey guys,
I recently bought an old Samsung Galaxy S4 Active SGH-i537 (AT&T) stock Android 4.4.2 - detailed specs at the end of this post.
>>>> This is my problem. <<<<
My GSM and LTE doesn't work any more. The phone says there is no SIM-Card, though I inserted a working Simple Mobile SIM (T-Mobile network). Moreover calling, texting via SMS and mobile data (Internet) do not work. :crying:
It seems also strange to me that the entry in "About Device -> Baseband-Version" is set to "Unknown" (see also below under "Phone Specs").
>>>> What happened <<<<
I opened the dialer and typed in *#9090#. A new Window "DIAG CONFIG" popped up. I selected
1 DM/DUM over HS-USB(*)
in the menu. After that the other menu points disappeared and the mobile carrier icon (http://appcrawlr.com/thumbs/app/icon/86/3336286.png) changed to a no-connection sign (http://www.clker.com/cliparts/2/3/2/5/1194984827960120970no.svg.med.png). When I type in *#9090# the "ServiceMode" window pops up but without any menu items.
>>>> That's why I did the *#9090# thing <<<<
I updated from Stock Android 4.4.2 to Stock Android 5.0.1 (Lollipop) keeping my root-access following this instruction:
http://www.droidviews.com/update-to-lollipop-and-root-att-galaxy-s4-active-sgh-i537/
The installation and everything went just fine. But I couldn't use my Mobile Internet any more, though it had worked on Android 4.4.2 perfectly. So I flashed back to the old Android 4.4.2 and it worked again. I thought there had to be some kind of AWS/LTE-locking in the stock Android 5.0.1 firmware. After some searching on the Internet I came to the conclusion that there has to be a LTE locking on the phone. So I tried this tutorial:
http://forum.xda-developers.com/showthread.php?t=2441211
But it didn't work for me (probably because Samsung locked the firmware). Till then my GSM/LTE still worked!
Afterwards I tried the *#9090# think (I got it from this post: https://disqus.com/home/discussion/droidview/how_to_sim_unlock_t_mobile_038_at038t_galaxy_s4_sgh_m919_sgh_i337/#comment-1604470770) and that was the thing, that made my GSM/LTE not work any more.
Flashing the phone with Odin (same 4.4.2 stock ROM) didn't change the problem.
I know this was stupid.
But please help me. This is my only phone and without it I have no connection to my family and friends. :crying:
Thank you so much in advance! (And sorry for my bad English. I'm trying to improve. :angel
>>>> Phone Specs <<<<
Model: SGH-i537
Android version: 4.4.2
!!! Basebandversion: "Unknown"
Kernel version: 3.4.0-987011
Build number: KOT49H.I537UCUCNE3
Security boot status: Type: Samsung
Security software version: MDF v1.0 Release 2
Maybe try to update prl ok if you can.
Sent from my LGLS770 using Tapatalk
You need to flash good modem to solve baseband unknown
أرسلت بواسطة iPhone بإستخدام Tapatalk
abdelaziz1987 said:
You need to flash good modem to solve baseband unknown
Click to expand...
Click to collapse
But how? I can not find any modem firmware on the internet, which is for ROM 4.4.2 NE or above.
Anyone with a link out there?
tnomtlaw said:
Maybe try to update prl ok if you can.
Click to expand...
Click to collapse
I can not even get there because it says "No SIM". The problem is the modem firmware, I think. But I have no modem firmware for stock ROM 4.4.2 NE or above.
Or google for full factory firmware it come 4 parts
أرسلت بواسطة iPhone بإستخدام Tapatalk

Categories

Resources