AOKP CPU frequency not sticking - HTC Sensation

I set my CPU sliders to min 810mhz max 1566 MHz, with ondemand gov.
It randomly keeps setting itself to min384 max384.
Can anyone tell me how to prevent this? I am changing the frequency using default aokp ROM control.
Thanks!
Sent from my HTC Sensation using xda app-developers app

Anyone ???
Sent from my HTC Sensation using xda app-developers app

Have you tried doing it with Kernel Tuner or System Tuner by 3C?
Which kernel are you using?

Using frankenstines default kernel that comes in the nov13 build of aokp - that's what I am running.
Yea tried it with rom toolbox and still same problem!
Sent from my HTC Sensation using xda app-developers app

Try this:
Reboot in CWM/4ext.
Wipe cache, davilk, system, boot. (It's not a full wipe)
Reinstall rom, gapps and everything you modified on /system partition.
Download and install Kernel Tuner and set the frequency.
You have to go in the app's settings and activate "Restore settings on boot" with one of 2 choices.

I'm having this same issue -- I've tried full wipes and factory resets as well as reflashing the ROM (KANG CM 10.1) and the kernel (Sultan r19.5) but the issue of both clock speeds sticking at 384Mhz persists. It's becoming nearly impossible to use the phone when it runs at speeds like these, does anyone have any ideas?
Thanks

Kazappin said:
I'm having this same issue -- I've tried full wipes and factory resets as well as reflashing the ROM (KANG CM 10.1) and the kernel (Sultan r19.5) but the issue of both clock speeds sticking at 384Mhz persists. It's becoming nearly impossible to use the phone when it runs at speeds like these, does anyone have any ideas?
Thanks
Click to expand...
Click to collapse
Check all 3rd party apps.. Which can modify th. CPU
First and foremost do this... Clear data of superuser/superSU in settings-all
Then go to su app and make the default prompt.. Deny
At least that would take phone to default CPU speed
Also you need to check the init.d scripts (in /etc/init.d)
Sent from my Nexus 7 using xda premium

ganeshp said:
Check all 3rd party apps.. Which can modify th. CPU
First and foremost do this... Clear data of superuser/superSU in settings-all
Then go to su app and make the default prompt.. Deny
At least that would take phone to default CPU speed
Also you need to check the init.d scripts (in /etc/init.d)
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
I completed all of those things but I'm still having the same issue -- when I set the maximum CPU speed in the performance tab of settings, the CPU speed will briefly go to the value I select and almost immediately return to 384 MHz.

Sorry to bump this, but has anyone else ever even experienced this?

Related

What's the best overclock tool to use with the Skyrocket?

I came from the Hercules and I'm currently running Dewizzled 2.5 with Da_G's .42 kernel. If I use system tuner, it has no affect on the cpu... CPU tuner made my phone go into bootloop, and SetCPU makes it restart as soon as I go past 1.62ghz. With my hercules I had no problem running it at 1.89ghz
Hrm thats bizarre on cpu tuner and setcpu... have you tried the .42 with another rom? Also, if your able to use Da_g .42 without any SoD's (sleep of death) then you should really use Da_g .43 as it fixes an init script problem, which is likely why you werent seeing changes with system tuner. Seems alot of people have SoD's with various stock roms on Da_g's post .3 versions... so if you flash another rom and then start having them either flash .3 or change back to your working rom.
.43 Can be found here: http://forum.xda-developers.com/showpost.php?p=20090801&postcount=462
System tuner and setcpu also seem to force the second core online all the time, so its been highly recommended that you use a script to set the o'clock and such. Instructions are here, or if your not too saavy can use twopumpchump's pre-made version which is CWM flashable. (here)
It seems every cpu app I've tried revert the kernel back to it's stock settings. Faux's kernel is 384-1720 (I think) by default. I wish it was 192 as default. Every time I open up system tuner pro, setcpu, fauxclock, rom toolbox pro.....they don't stick. If anyone has a way of making it stick I know I'd appreciate it. Even if I choose set on boot it doesn't.
sulpher said:
Hrm thats bizarre on cpu tuner and setcpu... have you tried the .42 with another rom? Also, if your able to use Da_g .42 without any SoD's (sleep of death) then you should really use Da_g .43 as it fixes an init script problem, which is likely why you werent seeing changes with system tuner. Seems alot of people have SoD's with various stock roms on Da_g's post .3 versions... so if you flash another rom and then start having them either flash .3 or change back to your working rom.
.43 Can be found here: http://forum.xda-developers.com/showpost.php?p=20090801&postcount=462
System tuner and setcpu also seem to force the second core online all the time, so its been highly recommended that you use a script to set the o'clock and such. Instructions are here, or if your not too saavy can use twopumpchump's pre-made version which is CWM flashable. (here)
Click to expand...
Click to collapse
Thanks I'll flash that and see if it works I have a feeling that it's the mixture of Dewizzled and Da_G lol and I love TDJ's Darkside kernel but right now it's only available for the Hercules so it'll cause the screen orientation issue. Hopefully he'll make a port for the Skyrocket
I had the same problem but on coke rom with faux.. So I flashed the giedion script.. And now it seem to hold and go now deep sleep, and check it out in the faux kernel section in the development section.
Sent from my Xoom using xda premium
I flashed faux's kernel and used system tuner but it still wouldn't stick until I rebooted... I have minimum set to 192mhz and screen off at 192 as well but in CPU Spy I only see 1728, 540 and Deep Sleep
How many overclock apps do you have on you phone at one time? And yes after you've made CPU adjustments click set on boot and reboot
Sent from my SAMSUNG-SGH-I727 using xda premium
cdshepherd said:
How many overclock apps do you have on you phone at one time? And yes after you've made CPU adjustments click set on boot and reboot
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
1 at I time. I uninstall if it doesn't work before installing the next. i've had my phone with screen off for a while now and it seems that 75% it's staying at 540mhz, barely at deep sleep and rest at 1728mhz
I actually underclock my processor. To about 1ghz . As for your deep sleep issue I can't actually say cause I've never had the issue but look around the skyrocket threads. There's a lot of info on it.
Sent from my SAMSUNG-SGH-I727 using xda premium
i like nofrills
I use android overclock works fine on Da_G's kernel
Use faux clock for a faux version kernel. With any other kernel I have had great results with set CPU.
Sent from my SAMSUNG-SGH-I727 using XDA App

[Q] CPU Settings

I'm on Venom Ss and using the default kernel for the ROM, but after setting the maximum at 1.026mhz and minimum at 702mhz, the settings don't stick, changing to 384mhz maximum and minimum constantly. How do I make the settings stick? I have done a full wipe. Thanks in advance!
Cavalry88 said:
I'm on Venom Ss and using the default kernel for the ROM, but after setting the maximum at 1.026mhz and minimum at 702mhz, the settings don't stick, changing to 384mhz maximum and minimum constantly. How do I make the settings stick? I have done a full wipe. Thanks in advance!
Click to expand...
Click to collapse
use the SetCPU app from google play. good luck! :fingers-crossed:
chassy_8o9 said:
use the SetCPU app from google play. good luck! :fingers-crossed:
Click to expand...
Click to collapse
Yup I'm using SetCPU already, but it still doesn't seem to stick occassionally. Is there something that I haven't done?
Cavalry88 said:
Yup I'm using SetCPU already, but it still doesn't seem to stick occassionally. Is there something that I haven't done?
Click to expand...
Click to collapse
try the bricked kernel... with that kernel stays as your needs.... well, that's my case
:fingers-crossed: good luck!
Sense 4 roms sometimes does that bug, it happened to me with ordroid after I installed it with a full wipe it became normal something makes your CPU rise and if you don't know what it is your only chance is full wipe
phylosoph said:
Sense 4 roms sometimes does that bug, it happened to me with ordroid after I installed it with a full wipe it became normal something makes your CPU rise and if you don't know what it is your only chance is full wipe
Click to expand...
Click to collapse
I already did a full wipe before flashing though..
Sent from my HTC Sensation Z710e using xda app-developers app
Try with system tuner maybe? There are various option how to set the frequencies (via script or normally)
So far the settings on system tuner aren't sticking either. How do I use scripts? Thanks a lot!
Sent from my HTC Sensation Z710e using xda app-developers app
i am on viperss 1.0.0 too and i am using the Bricked kernel 1.35
with maxkhz to 1728000 . after i install the bricked kernel all run well
but 1 hour later is gone back to the default setting (1566mhz) .
then i installt system tuner and let him on 1400mhz , 1 your later the setting is again on default by 1566 ???
i dont understand this because by a earlier version all was well..
i hope you can help me

[Q] Issue: Screen don't want to go sleep

Hi everyone,
I have weird issue, screen don't want to go into sleep mode.
I tried to change settings: 15s, 30s, 45s. Still the same.
After reboot it work correctly but only few hours.
I don't want flash my rom again becouse I've set everything after yesterday flash. :crying:
My configuration:
Android Revolution HD 6.7.2
CPU OC 1782 MHz
GPU - 320 MHz
Kernel SebastianFM 1.5.2
Installed extensions:
Adreno Drivers 2.18
ics_small_89-fronts
(6.7.x_XE)battery_fix(norecent,eqs2,4gicons)
Ultra smooth Rosie
JellyBean Animations
Any idea what should I do, guys ?
You likely have a application that's preventing your device from sleeping. Check permissions on your applications and you will find the culprit. Best wishes.also when installing apps look at what the developers say in certain apps it will clearly state PREVENT Device from sleeping. Hope this helps.
Sent from my HTC Sensation 4G using xda premium
pawel30w said:
Hi everyone,
I have weird issue, screen don't want to go into sleep mode.
I tried to change settings: 15s, 30s, 45s. Still the same.
After reboot it work correctly but only few hours.
I don't want flash my rom again becouse I've set everything after yesterday flash. :crying:
My configuration:
Android Revolution HD 6.7.2
CPU OC 1782 MHz
GPU - 320 MHz
Kernel SebastianFM 1.5.2
Installed extensions:
Adreno Drivers 2.18
ics_small_89-fronts
(6.7.x_XE)battery_fix(norecent,eqs2,4gicons)
Ultra smooth Rosie
JellyBean Animations
Any idea what should I do, guys ?
Click to expand...
Click to collapse
You can use "Battery use" to see which app is using your battery. Try killing the apps that are running, until you find which is causing it.
I've formated SD (long format) and flashed rom again, .
I try to use clean rom few hours and check if the issue is still.
Just install DualCore-rc8
BTW. Do u thing OC can do this problem ?
My phone worked stable on maximum CPU frequency - 1832 MHz and 320 MHz GPU
pawel30w said:
I've formated SD (long format) and flashed rom again, .
I try to use clean rom few hours and check if the issue is still.
Just install DualCore-rc8
BTW. Do u thing OC can do this problem ?
My phone worked stable on maximum CPU frequency - 1832 MHz and 320 MHz GPU
Click to expand...
Click to collapse
I don't think OC can cause this problem but then I think 1832Mhz is way too high and may cause instability to your phone, try to tune it down. In fact there won't be a significant performance improvement even if you OC it so high. Not worth frying your phone's CPU for that insignificant gain.
It's a application like I said that's preventing your device from sleeping! Find that app and your issue will be resolved.
Sent from my HTC Sensation 4G using xda premium
I work now on clean rom with just OC apps. All day everything was OK.
Tomorrow I try to install "DarkForest Tweaks 3.33 Base RC 3.0.1" again and I will see then becouse I think it could couse a problem.
Thanks mates :good:
pawel30w said:
I work now on clean rom with just OC apps. All day everything was OK.
Tomorrow I try to install "DarkForest Tweaks 3.33 Base RC 3.0.1" again and I will see then becouse I think it could couse a problem.
Thanks mates :good:
Click to expand...
Click to collapse
If only you had mentioned you had installed that in the OP...
Or better still, read the last 2-3 pages of my thread, its all there.
I think its my modded messages.apk and I posted a stock unmodded one (actually when I say stock, that is a lie because it is the apk from my ROM and as such has gone through 3-4 apk optimization scripts) in the last 1-2 pages in the thread which seems to have fixed this

Getting CPU settings to stick

I have been unsuccessful on being able to get CPU settings to stick. I am on clean kernel and its overclockabke up to 1.9, and the low side can be under clocked to 192, with default being 384.
I personally want mine to stick at 192 low and 1728 high...and it does for maybe 5 minutes, then its back to the CPU wide open at 1.9 and low 384.
What can I do to get my settings to stick? I have set on boot checked.
Sent from my HTC One X using xda app-developers app
most early kernels were made to run at the creators best stable overclock. i would use a newer kernel that might have more inherent flexibility such as the new beastmode v4 or ElementalX which might allow you to get a stable overclock at frequencies lower then max.
DvineLord said:
most early kernels were made to run at the creators best stable overclock. i would use a newer kernel that might have more inherent flexibility such as the new beastmode v4 or ElementalX which might allow you to get a stable overclock at frequencies lower then max.
Click to expand...
Click to collapse
Has beastmode setup where I can pull only the boot.IMG out yet?
Sent from my HTC One X using xda app-developers app
joho5 said:
Has beastmode setup where I can pull only the boot.IMG out yet?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Negative on Beastmode v4. I'm still trying to figure out how to flash that kernel.
In the mean time, I've flashed ElementalX v1.14. So far, settings have stuck, and I'm using kernel tuner.
No frills CPU app works very well for me. Kernel tuner was unable to keep my settings where i wanted them.
Sent from my One X using xda premium

[Kernel] B14CKB1RD [v2.3][9-27-2014][SGH-T699]

B14CKB1RD​Kernel for the Samsung Relay 4G​
B14CKB1RD is a custom kernel meant for 4.4 KitKat based Roms that comes with the freedom of user voltage control as well as Under Voltage Control. There is 8 governors and 8 i/o schedulers. It's built with the 4.10 sabermod toolchain and -o3 compiled for best optimizations and performance. It comes fully stable and suitable for what uses you want from your phone. From best battery life to best performance you can find for your phone on any 4.4 KitKat rom available. As usual happy flashing. Just note i am not responsible if you the user messes up your phone. I will always be around to help in any way i can so if any issues arise please feel free to send me a pm before trolling.
Downloads:
v2.3 For REV3NT3CH Roms (wont work on roms built prior to 7/13/14):
Download: Click Here!
v1.3 For REV3NT3CH Roms (for my rom builds released prior to 7/13/14):
Download: Click Here!
For TeamApexQ Roms:
Temporarily pulled down for development reasons..new link will be available soon
How to Install:
Boot to recovery
Wipe Cache
Wipe Dalvik Cache
Flash Kernel .zip
Reboot to profit
v2.0 Features:
Governors:
Abyssplugv2
Interactive
Ondemand
Optimax
Performance
Smartmax
Uberdemand
Wheatley
I/O Schedulers:
Bfq
Cfq
Deadline
Noop
Row
Sio
SioPlus
Zen
TCP Congestion Controls:
Bic
Cubic
Highspeed
Htcp
Hybla
Illinois
Lp
Reno
Scalable
Vegas
Veno
Westwood
Yeah
Other:
Linux Kernel 3.4.104
CPU Overclock up to 1620mhz
GPU Overclock up to 480mhz
UnderVoltage Control
Governor Tuning
Fast Charge
Source:
click here
Credits & Thanks
@Snuzzo (for teaching me all he knows about kernel)
@falle21 (for beta testing)
TeamApexQ (for their hard work on the Relay)
All the other developers who contribute to the D2 kernel upstream
Changlog 9/27/14
1.)Kernel updated to linux upstream version 3.4.104 straight from kernel.org and to B14CKB1RD v2.3
2.) Added Fast Charge support
3.) Added Optimax Governor and removed unneccesary ones
4.) Did various other fixes in source
As usual my personal preference is Wheatley Governor and SIO I/O scheduler as i get great performance and battery life with it
Awesome!! Thanks for your work. Great battery and performance with this kernel in liquid, carbon and omni! Thanks for do it
Sent from my SGH-T699 using XDA Premium 4 mobile app
Which one do I need for cm11, is it TeamApexQ Roms ?
Can you rename the files to see a difference ?
I can't vouch for which one cm11 will use as its kernel varies between both...what happens is between my ROMs and omni/fat toad is graphical tearing...if one of these 2 causes this said tearing then try the other...I'd say try using TeamApexQ version first...
Sent from my L1QU1D R3L4Y using xda-developers app
Thanks @smartt699 for your generous donation. Its greatly appreciated and will help the family
Sent from my L1QU1D R3L4Y using xda-developers app
Thanks for your efforts! Here's the last_kmsg from a reboot today of this kernel flashed atop your latest Carbon ROM. Hope it helps.
reaper000 said:
Thanks for your efforts! Here's the last_kmsg from a reboot today of this kernel flashed atop your latest Carbon ROM. Hope it helps.
Click to expand...
Click to collapse
Is there an app you use that accesses system files...such as WiFi related...especially one with a lot of ads...or anything...certain themes may also cause reboots as well as using certain kernel tweaking tools
Sent from my L1QU1D R3L4Y using xda-developers app
REV3NT3CH said:
Is there an app you use that accesses system files...such as WiFi related...especially one with a lot of ads...or anything...certain themes may also cause reboots as well as using certain kernel tweaking tools
Sent from my L1QU1D R3L4Y using xda-developers app
Click to expand...
Click to collapse
Notice reboots typically occur when accessing data (Internet) but not only Wi-Fi. No games, just Googling something. Also, using no themes. Did use trickster mod to set up your recommendation of sio/Wheatley, but that's it.
Sent from my Nexus 5 using Tapatalk
reaper000 said:
Notice reboots typically occur when accessing data (Internet) but not only Wi-Fi. No games, just Googling something. Also, using no themes. Did use trickster mod to set up your recommendation of sio/Wheatley, but that's it.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
That's most likely the reason you get reboots...trickstermod is a known issue on a few devices....you can actually set governer and i/o scheduler under performance settings itself....unfortunately there no known fix even if you uninstalled the app except for clean wiping....I do not use any tweaking apps and have yet to get any reboots
Sent from my L1QU1D R3L4Y using xda-developers app
REV3NT3CH said:
That's most likely the reason you get reboots...trickstermod is a known issue on a few devices....you can actually set governer and i/o scheduler under performance settings itself....unfortunately there no known fix even if you uninstalled the app except for clean wiping....I do not use any tweaking apps and have yet to get any reboots
Sent from my L1QU1D R3L4Y using xda-developers app
Click to expand...
Click to collapse
I also have trickster mod along with pimp my rom, and a few others. I have also experienced some reboots until I put min at 1350 and max at 1512 and performance gov and io scheduler row. To do a "clean wipe" does this mean a full factory reset. I hope not. That is just something I am not going to do. That's why I'm still on carbon and not on the liquid rom.
Sent from my SGH-T699 using XDA Premium 4 mobile app
---------- Post added at 03:25 AM ---------- Previous post was at 03:15 AM ----------
chuckiev79 said:
I also have trickster mod along with pimp my rom, and a few others. I have also experienced some reboots until I put min at 1350 and max at 1512 and performance gov and io scheduler row. To do a "clean wipe" does this mean a full factory reset. I hope not. That is just something I am not going to do. That's why I'm still on carbon and not on the liquid rom.
Sent from my SGH-T699 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If I uninstalled these apps and reinstalled the rom and kernel after would that be enough to get the kernel to work as it should?
Sent from my SGH-T699 using XDA Premium 4 mobile app
chuckiev79 said:
I also have trickster mod along with pimp my rom, and a few others. I have also experienced some reboots until I put min at 1350 and max at 1512 and performance gov and io scheduler row. To do a "clean wipe" does this mean a full factory reset. I hope not. That is just something I am not going to do. That's why I'm still on carbon and not on the liquid rom.
Sent from my SGH-T699 using XDA Premium 4 mobile app
---------- Post added at 03:25 AM ---------- Previous post was at 03:15 AM ----------
If I uninstalled these apps and reinstalled the rom and kernel after would that be enough to get the kernel to work as it should?
Sent from my SGH-T699 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i suppose a uninstall of trickster mod AND pimp my rom and a dalvik wipe and cache wipe then do a dirty flash of rom and then do the kernel same method will work...but curious as to why use outdated and unsupported apps like this when it has it built into the rom itself....im not intending to come off negative but this app and kernel tuner has been widely known since jellybean to cause reboots and even bricks of some devices. the min cpu should also NEVER be set higher than 480....thats one way to really overheat and kill battery hence why i removed the mpdec touchboost that teamapexq uses
I'd love to add some (or all) of the governors and schedulers to the stock kernel (4.1.2). Do you have a github for the source? It would be super appreciated.
REV3NT3CH said:
i suppose a uninstall of trickster mod AND pimp my rom and a dalvik wipe and cache wipe then do a dirty flash of rom and then do the kernel same method will work...but curious as to why use outdated and unsupported apps like this when it has it built into the rom itself....im not intending to come off negative but this app and kernel tuner has been widely known since jellybean to cause reboots and even bricks of some devices. the min cpu should also NEVER be set higher than 480....thats one way to really overheat and kill battery hence why i removed the mpdec touchboost that teamapexq uses
Click to expand...
Click to collapse
Interesting perspective. I've rooted and run many custom ROMs and kernels on a Galaxy Nexus, Nexus 4, HTC One m7, and Nexus 5 with Trickster Mod and have never seen that app cause random reboots if the kernel parameters are set within reason (no UV or OC). Maybe I've just been lucky, but that would be very, very lucky as that lack of reboots applies to every ROM and every kernel combination with every single device I've tried over a few years. Even though I'm selective as to what I flash, that's in the hundreds as I can flash several times a day. And all with Trickster Mod on board.
The Relay 4G just seems unduly fragile to me. I've seen it reboot more times in a week than the other devices I mentioned randomly reboot in a year. I'm certainly not blaming any dev for this (and am thankful for all the efforts put here) and want to acknowledge just how difficult it must be to squeeze these great ROMs into a device that probably wasn't designed to handle them. Again, no disrespect to the OP.
Sent from my Nexus 5 using Tapatalk
Well nexus devices are built pretty vanilla when it comes to android so its compatibility outreaches more....I've had reboots on every Motorola and HTC devices I've owned....I know for me I haven't had a reboot but I guess I'm lucky....but it could just be small incompatibilities in our code that may cause this and we just haven't found them or figured it out yet
Sent from my L1QU1D R3L4Y using xda-developers app
REV3NT3CH said:
Well nexus devices are built pretty vanilla when it comes to android so its compatibility outreaches more....I've had reboots on every Motorola and HTC devices I've owned....I know for me I haven't had a reboot but I guess I'm lucky....but it could just be small incompatibilities in our code that may cause this and we just haven't found them or figured it out yet
Sent from my L1QU1D R3L4Y using xda-developers app
Click to expand...
Click to collapse
Which is probably why, as a flashaholic, I stick to Nexi(?). My girlfriend, however, insists on a physical keyboard *sigh*.
Thanks for the ROMs and kernel; you're singlehandedly keeping this device relevant. Well, you and TeamApex.
Stop it so I can get her a new phone already...! (kidding)
Sent from my Nexus 5 using Tapatalk
reaper000 said:
Which is probably why, as a flashaholic, I stick to Nexi(?). My girlfriend, however, insists on a physical keyboard *sigh*.
Thanks for the ROMs and kernel; you're singlehandedly keeping this device relevant. Well, you and TeamApex.
Stop it so I can get her a new phone already...! (kidding)
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I would just like to add, if I may, that after uninstalling those apps I have not had any random reboots. Also on a topic unrelated, that viper4android fx app does not play well with poweramp, got rid of poweramp.
Sent from my SGH-T699 using XDA Premium 4 mobile app
chuckiev79 said:
I would just like to add, if I may, that after uninstalling those apps I have not had any random reboots. Also on a topic unrelated, that viper4android fx app does not play well with poweramp, got rid of poweramp.
Sent from my SGH-T699 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
uhhhh im using poweramp just fine....of course i had to set up sound settings within it....which i can guide you through that as well
Also...just to let people know...will be spending the rest of the week updating and further developing the kernel and various other fixes
Sent from my L1QU1D R3L4Y using xda-developers app

Categories

Resources