I thought it would be cool to see what the fuss is about rooting and loading a custom ROM but I just dont see the point after playing around the last few days.
I followed the rooting instructions online for the HTC One S ville and then made it to the loading Clockwork Recovery onto the phone and performing an Nandroid backup like it suggested. Well thats where I ran into the issue of not being able to boot into anything else afterwards it would just keep booting to Clockwork Recovery screen. I figured out that I have to hold the power button for 10 seconds and then it will boot properly to stock android ROM. So once I figured that out I began using the tutorial to load the Viper ROM. Once I loaded the viper rom I ran into an issue at step #11
After you configured it, reboot to your bootloader in fastboot mode
Click to expand...
Click to collapse
I stopped there because I was still stuck at the issue of being booted to the Clockword Recovery screen and unable to get to the bootloader screen. Even now if I shutdown my phone it just restarts to the Clockwork Recovery screen and I have to do the 10 second power button trick to get around it. (remember I did not complete steps 11-20 from post #5 here on the instructions)
http://forum.xda-developers.com/showthread.php?t=1850917
So I was just wondering what I should do to get back to complete stock android rom and see about unrooting my phone.
jerm said:
I thought it would be cool to see what the fuss is about rooting and loading a custom ROM but I just dont see the point after playing around the last few days.
I followed the rooting instructions online for the HTC One S ville and then made it to the loading Clockwork Recovery onto the phone and performing an Nandroid backup like it suggested. Well thats where I ran into the issue of not being able to boot into anything else afterwards it would just keep booting to Clockwork Recovery screen. I figured out that I have to hold the power button for 10 seconds and then it will boot properly to stock android ROM. So once I figured that out I began using the tutorial to load the Viper ROM. Once I loaded the viper rom I ran into an issue at step #11
I stopped there because I was still stuck at the issue of being booted to the Clockword Recovery screen and unable to get to the bootloader screen. Even now if I shutdown my phone it just restarts to the Clockwork Recovery screen and I have to do the 10 second power button trick to get around it. (remember I did not complete steps 11-20 from post #5 here on the instructions)
http://forum.xda-developers.com/showthread.php?t=1850917
So I was just wondering what I should do to get back to complete stock android rom and see about unrooting my phone.
Click to expand...
Click to collapse
Did you wide data/cache before you flashed your custom rom?
There are several ways to get back to your stock rom... If you made a backup of your stock rom via cwm just restore it.. if you didnt make a backup just find the correct ruu for your device and flash it that way, if you dont have super cid you will need to find the correct ruu or it will not flash. If you need any more infomation please let me know and i will do my best to help you out step by step.
jerm said:
I thought it would be cool to see what the fuss is about rooting and loading a custom ROM but I just dont see the point after playing around the last few days.
I followed the rooting instructions online for the HTC One S ville and then made it to the loading Clockwork Recovery onto the phone and performing an Nandroid backup like it suggested. Well thats where I ran into the issue of not being able to boot into anything else afterwards it would just keep booting to Clockwork Recovery screen. I figured out that I have to hold the power button for 10 seconds and then it will boot properly to stock android ROM. So once I figured that out I began using the tutorial to load the Viper ROM. Once I loaded the viper rom I ran into an issue at step #11
I stopped there because I was still stuck at the issue of being booted to the Clockword Recovery screen and unable to get to the bootloader screen. Even now if I shutdown my phone it just restarts to the Clockwork Recovery screen and I have to do the 10 second power button trick to get around it. (remember I did not complete steps 11-20 from post #5 here on the instructions)
http://forum.xda-developers.com/showthread.php?t=1850917
So I was just wondering what I should do to get back to complete stock android rom and see about unrooting my phone.
Click to expand...
Click to collapse
Keep trying to get into the bootloader with holding the power for 10 seconds then as soon you see stop flashing hold the Vol- and power then use the all-in-one kit to install TWRP recovery then you wont have this problem any more and you will still need to fastboot boot.img for the rom to work.
PEP-C said:
Did you wide data/cache before you flashed your custom rom?
There are several ways to get back to your stock rom... If you made a backup of your stock rom via cwm just restore it.. if you didnt make a backup just find the correct ruu for your device and flash it that way, if you dont have super cid you will need to find the correct ruu or it will not flash. If you need any more infomation please let me know and i will do my best to help you out step by step.
Click to expand...
Click to collapse
No i did not clear the cache or the dalvik cache....im not sure if i wiped data to be honest since it was a few months back. I still have not wiped either caches as of now either.
I'm going to try to download twrp or whatever from the android market right now
Related
After flashing the latest ROM I was messing around with (WajkIUI 2.1.6) the phone would crash and reboot within 30 seconds of booting up. The previous ROM that was running was FAUXMIUI_RG2xV2.0.0 (01/08/2011 [v2.0.0]OVERCLOCK) that was stable except for when I’d turn wi-fi on after being off for 8 hours or so phone would reboot.
I figured I would boot into ClockworkMod Recovery and restore one of the nandroid backups, I tried booting into recovery I found out that I could not. When I hold the volume down and press the power button I see the screen that says software update (like when flashing with OneClickRecoveryFlasher).
Whenever I flash a new ROM I will Wipe data/factory reset, wipe cache partition, and then wipe dalvik before installing zip. I’ve always run cyanogenmod nighties; FAUXMIUI_RG2xV2.0.0 was the first MIUI ROM I’ve used.
When I run OneClickRecoveryFlasher, I do not see any errors on the command prompt so I am assuming it was successful, or at least thinks it was.
I tried to Restore LG G2x Stock Recovery using OneClickRecoveryFlasher and then flashing v5.0.2.0 and still no ClockworkMod Recovery, also tried v4.0.1.5 and still no ClockworkMod Recover.
I then tried http://forum.xda-developers.com/showthread.php?t=1248644 and with that I was able to get back to stock 2.3.3, tried to use OneClickRecoveryFlasher to flash ClockworkMod, still no go.
I tried LG Mobile Update and that proceeded to install something, not really sure what the update was, after the update finished, phone rebooted into stock 2.3.3. Shut the phone down and tried to flash ClockworkMod and still nothing.
I did a hard reset following http://mobilephonerepairguides.blogspot.com/2011/04/lg-g2x-hard-reset.html
I also tried http://forum.xda-developers.com/showthread.php?t=1183168, that got me to stock 2.3.3 but I still could not boot in to ClockwordMod Recovery.
I’m having a hell of a time wrapping my head around what I screwed up. Did I somehow destroy the recovery partition, is that possible? Any ideas what I broke and how to fix it? Can I used adb to view the partition table, would that tell me if something was corrupt?
Any help and ideas would be appreciated, I have tried doing my due diligence and I apologize if I missed something obvious.
Thanks,
-Matt
Faux never made a miui
Did you nvflashed recovery? If no then do that first.
NVIDIA NEVER AGAIN!
If you did the LG Updater it returned your phone to stock everything, including recovery. You need to use NVFlash (One Click method okay) to reflash CWM and then you should be good to go.
When the phone is completely off, hold volume down, then hold the power button and don't let go of both until the second lg logo.
If you hold volume down too early it'll give you the software update screen.
Well that's embarrassing, thanks buru898 that did the trick and got me into CWM Recovery. I never remember holding the power button for that long but it worked and I'll remember that for next time.
Thanks
fcisco13 said:
Faux never made a miui
Did you nvflashed recovery? If no then do that first.
NVIDIA NEVER AGAIN!
Click to expand...
Click to collapse
Sorry, I only wrote in the actual zip file name, I meant RG2x-MIUI v2.1.6-MultiLang/Powered by Faux Kernels CM v0.4.8(01/08/2012)[v2.0.0].
Thanks
I have been searching for hours..and still couldn't find an asnwer..
at first when my phone was still alright I did a factory reset and after that
it stuck on a boot screen with android in the middle...for a long time
then I use vol down + power method to reset it and clean everything (like system,cache and boot) all of them...
now I stuck on the green htc boot screen
I tried to install rom and kernel but still won't work I wonder whats the problem now
any idea???
thanks
nias9527 said:
I have been searching for hours..and still couldn't find an asnwer..
at first when my phone was still alright I did a factory reset and after that
it stuck on a boot screen with android in the middle...for a long time
then I use vol down + power method to reset it and clean everything (like system,cache and boot) all of them...
now I stuck on the green htc boot screen
I tried to install rom and kernel but still won't work I wonder whats the problem now
any idea???
thanks
Click to expand...
Click to collapse
You haven't searched that bad, if not you would have come across this:
http://forum.xda-developers.com/showthread.php?t=1396229
Anyway, are you rooted? if you are rooted and did a factory reset then you don't have a Rom in your phone and that is why you are stuck on the splash screen. You even wiped everything, so probably erased usb debugging drivers from the device.
Well, you have these choices: 1) If you still can access your custom recovery (CWM or 4EXT) then you need to put a rom in your sdcard and flash it. You will have your phone back. You can even restore a nand backup and have your system as it was at that time.
2) If you are S-OFF, but can not access a custom recovery, then flash it again and follow option 1)
3) Use a PD98IMG.zip file to flash a RUU in hboot and you will get back. In the link I provided above, you have several links to those files.
In all cases, you will need an sdcard reader or someway to get the files to your sdcard.
Hope it helps....
thanks!!!!
problem solved
I'm having the same problem stuck on the android boot screen I can access recovery and tried to flash a few different roms but with the same results.
Fortis4Eva said:
I'm having the same problem stuck on the android boot screen I can access recovery and tried to flash a few different roms but with the same results.
Click to expand...
Click to collapse
Did you read the link that glevitan posted a couple posts above yours? Did you try what it says? Which option? What happened?
so i recently got a HTC one S, wanted a custom skin, and followed this:
www[dot]theandroidsoul[dot]com/miui-4-one-s/
tutorial in order to get cwm installed so i could instal a custom rom.
each step worked perfectly until i had to reboot into recovery mode and when i was going to instal
the OS everytime i clicked down to select 'format', the screen did a half second blink and would simply restart cwm.
the only way to get out of it was hold the power and volume to force a restart.
i them attempted to flash back to the default htc recovery (if i cant have my cake, least let me have what i had before)
unfortunately it gave me the error in cmd that the .img was unable to be read.
so wonderful. now i am almost positive this is something i am doing wrong,
but i just can't pick out what and i'll admit i'm not familiar with flashing, ect.
i've tried to follow tutorials such as forum.xda-developers[dot]com/showthread[dot]php?t=1707550
but am unable to even flash anything rom or otherwise,
i just keep getting stuck at the cwm recovery.
edit:
i attempted the fix mentioned in another thread about using the all in one,
now my phone simply crashes at recovery and wont even start recovery.
I unlocked and rooted my tablet yesterday and everything appeared to be working fine. After using it for a couple hours and restarting it a few times it stopped working and is now locked in a boot loop. When I try boot the tablet it comes on and gets to the animation where the glint of light goes across the Asus logo but it does not finish and instead it stops there and I get the moving circles at the bottom. I've left it running there for several hours and it just hangs.
I've tried erasing the data and booting to linux but the same thing happens when I try either of those.
I've also tried flashing a number of different ROMs, but all that happens is it starts installing and then I get the Android guy on his side error screen.
I hadn't done anything to the ROM and was still running 10.6.1.14.4. I even downloaded that same ROM from http://forum.xda-developers.com/showthread.php?t=2266519 but I get the same error message when I try flash that ROM.
I would really, REALLY appreciate any ideas at all - and thanks in advance for any suggestions.
stuck on animation loop
slap_shot_12 said:
I unlocked and rooted my tablet yesterday and everything appeared to be working fine. After using it for a couple hours and restarting it a few times it stopped working and is now locked in a boot loop. When I try boot the tablet it comes on and gets to the animation where the glint of light goes across the Asus logo but it does not finish and instead it stops there and I get the moving circles at the bottom. I've left it running there for several hours and it just hangs.
I've tried erasing the data and booting to linux but the same thing happens when I try either of those.
I've also tried flashing a number of different ROMs, but all that happens is it starts installing and then I get the Android guy on his side error screen.
I hadn't done anything to the ROM and was still running 10.6.1.14.4. I even downloaded that same ROM from http://forum.xda-developers.com/showthread.php?t=2266519 but I get the same error message when I try flash that ROM.
I would really, REALLY appreciate any ideas at all - and thanks in advance for any suggestions.
Click to expand...
Click to collapse
this gonna sound odd but i had exact same prob when i rooted and flashed chromix rom. it went. what i did was flash it once with the rom with secure wipe, then i flashed again. and it got stuck at optimizing apps,then i tried reflashing couldnt get it to boot, what i ended up doing was using clockwork mod to factory reset my tablet, then had to restart, and reflash, this time it actually got to main screen. dont let it discharge/reboot for awhile as im bout to post a issue im having with it. but thats what i did to make it work for me.
shadowarez said:
this gonna sound odd but i had exact same prob when i rooted and flashed chromix rom. it went. what i did was flash it once with the rom with secure wipe, then i flashed again. and it got stuck at optimizing apps,then i tried reflashing couldnt get it to boot, what i ended up doing was using clockwork mod to factory reset my tablet, then had to restart, and reflash, this time it actually got to main screen. dont let it discharge/reboot for awhile as im bout to post a issue im having with it. but thats what i did to make it work for me.
Click to expand...
Click to collapse
I'm not sure I understand --- how do I get to the clockwork mod if i can't get past the startup animation? And I've tried a bunch of roms with secure wipe and i get an error from every one of them.
didnt you install clockwork mod first?
slap_shot_12 said:
I'm not sure I understand --- how do I get to the clockwork mod if i can't get past the startup animation? And I've tried a bunch of roms with secure wipe and i get an error from every one of them.
Click to expand...
Click to collapse
the thing i found showed me to installed the clockwork mod first before i did any flashing, i rooted device then i flashed once clockwork mod was installed, i had to root, then install rom manager and goo manager, from within there i installed the clockwork recovery script/mod then i proceeded to flash chromi-X DEODEX.
Did you flash the correct bootloader? I had the same problem, look for my posts in the last few pages of ChromiX.
Here: http://forum.xda-developers.com/showpost.php?p=41658701&postcount=2716
slap_shot_12 said:
I unlocked and rooted my tablet yesterday and everything appeared to be working fine. After using it for a couple hours and restarting it a few times it stopped working and is now locked in a boot loop. When I try boot the tablet it comes on and gets to the animation where the glint of light goes across the Asus logo but it does not finish and instead it stops there and I get the moving circles at the bottom. I've left it running there for several hours and it just hangs.
I've tried erasing the data and booting to linux but the same thing happens when I try either of those.
I've also tried flashing a number of different ROMs, but all that happens is it starts installing and then I get the Android guy on his side error screen.
I hadn't done anything to the ROM and was still running 10.6.1.14.4. I even downloaded that same ROM from http://forum.xda-developers.com/showthread.php?t=2266519 but I get the same error message when I try flash that ROM.
I would really, REALLY appreciate any ideas at all - and thanks in advance for any suggestions.
Click to expand...
Click to collapse
Seems to me you installed Asus factory stock rom JB 4.2.1 (10.6.1.14.4), which means you have the latest bootloader, then you unlocked and rooted your device, however, you never installed any custom recovery like TWRP or CWM (clockmod). Now your device is boot looping. You need to boot into stock recovery by turn off your device, hold volume down and power button until you see white text on the screen, now release both buttons, you should see 3 icons (RCK, Android and wipe data). NOW you are in fastboot mode. Let me know at least you can get that far, before we continue....
buhohitr said:
Seems to me you installed Asus factory stock rom JB 4.2.1 (10.6.1.14.4), which means you have the latest bootloader, then you unlocked and rooted your device, however, you never installed any custom recovery like TWRP or CWM (clockmod). Now your device is boot looping. You need to boot into stock recovery by turn off your device, hold volume down and power button until you see white text on the screen, now release both buttons, you should see 3 icons (RCK, Android and wipe data). NOW you are in fastboot mode. Let me know at least you can get that far, before we continue....
Click to expand...
Click to collapse
buhohitr -- You're exactly right. I can boot into stock recovery. When I select Android or wipe data it goes back to the animation screen and hangs up. When I select RCK it goes to the Android guy and says installing update but then it show him fallen over and the word Error. I've tried RCK with a memory card that has a number of different ROMs on it but the same thing keeps happening.
slap_shot_12 said:
buhohitr -- You're exactly right. I can boot into stock recovery. When I select Android or wipe data it goes back to the animation screen and hangs up. When I select RCK it goes to the Android guy and says installing update but then it show him fallen over and the word Error. I've tried RCK with a memory card that has a number of different ROMs on it but the same thing keeps happening.
Click to expand...
Click to collapse
Give this a try, the factory Asus firmware zip file that you downloaded, unzip the file, you should see another zip file, rename this new zip file to "EP201_768_SDUPDATE.zip" (without quotation), then copy it to the root of your sdcard then boot into stock recovery and execute the RCK again. Make sure you don't have any other zips laying around in the root of your sdcard.
You are truly a god among men.
buhohitr said:
Give this a try, the factory Asus firmware zip file that you downloaded, unzip the file, you should see another zip file, rename this new zip file to "EP201_768_SDUPDATE.zip" (without quotation), then copy it to the root of your sdcard then boot into stock recovery and execute the RCK again. Make sure you don't have any other zips laying around in the root of your sdcard.
Click to expand...
Click to collapse
THIS WORKED!!! Thanks so much. I was really worried I had bricked it.
So now one last question --- WHY did that work? Is there somewhere I could go to read up on this kind of stuff? I've tried surfing the XDA forum but there's a lot of stuff like this where someone gets there problem solved, but not much explaining why something worked so I can learn more about it.
slap_shot_12 said:
THIS WORKED!!! Thanks so much. I was really worried I had bricked it.
So now one last question --- WHY did that work? Is there somewhere I could go to read up on this kind of stuff? I've tried surfing the XDA forum but there's a lot of stuff like this where someone gets there problem solved, but not much explaining why something worked so I can learn more about it.
Click to expand...
Click to collapse
Somehow the stock recovery was reinstalled on your tablet, thus letting this method work. It however does not on CWM or TWRP. All you did was manually reinstall a stock rom back onto your tablet. How it got the stock recovery is beyond me unless you flashed a stock ROM from CWM and didnt realize what you were installing.
Tylor
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
slap_shot_12 said:
THIS WORKED!!! Thanks so much. I was really worried I had bricked it.
So now one last question --- WHY did that work? Is there somewhere I could go to read up on this kind of stuff? I've tried surfing the XDA forum but there's a lot of stuff like this where someone gets there problem solved, but not much explaining why something worked so I can learn more about it.
Click to expand...
Click to collapse
Since the JB 4.2.1 upgrade, this is the most reliable method to install Asus full stock firmware. Also, since you're unlocked, let root the device by go here http://forum.xda-developers.com/showthread.php?t=2230763 download the tool and root it. Once rooted, I suggest that you should install TWRP custom recovery, by download Goomanager from the market, open the app and tab on the 3 little boxes on the top right hand corner, select "install recovery scripts" , this will shutdown your device and install custom TWRP recovery script, once this installed, you can download "rebooter" from the market and this app has many options, one of them is allowed you easily boot into custom recovery.
I rooted my MT4GS a few months ago but stuck with the stock ROM. I decided I wanted to try out the CyanogenMod 9.1 ICS ROM. I followed the following steps:
1) Installed ROM Manager.
2) ROM Manager indicated a newer version of ClockworkMod Recovery and I installed it (5.0.2.7).
3) Using ROM Manager, did a full backup of the current ROM. All went well.
4) Using ROM Manager, downloaded and installed CyanogenMod 9.1.0 stable-doubleshot. I specified to wipe the data and cache partitions. The installation seemed to go normally.
When the phone rebooted, it was stuck at the logo screen. Had to remove the battery to turn it off. Tried a couple times, still the same.
Since I had the backup, I decided I would use CWM to restore the old ROM.
When I boot into recovery mode, it shows CWM 5.0.2.7, but whatever option I try to choose from the recovery menu, The screen just goes blank with the CWM logo in the middle and nothing else happens. Hitting the power button returns me to the menu, but no option works, even power down or reboot. It just goes back to the CWM logo again and I have to remove the battery to shut it down.
So, I thought I would try using fastboot to flash the ROM again. When I boot the phone into the boot loader and select fastboot, then plug the phone in via USB, nothing happens. Windows does not see the phone and ADB or fastboot don't see it either. It's not a driver issue, as the computer is still setup from when the computer was rooted and I connect the phone all the time with no problems.
When the phone is off and plugged into USB or the charger, I still get the charging light, though it goes off after about 10 seconds, then comes back on and cycles like that.
Is there anything I can try at this point, or is my phone bricked? It seems like I followed all the steps correctly. Is there an update.zip I can put in the root folder and see if it picks it up?
Any help would be appreciated.
brucehvn said:
I rooted my MT4GS a few months ago but stuck with the stock ROM. I decided I wanted to try out the CyanogenMod 9.1 ICS ROM. I followed the following steps
...
Click to expand...
Click to collapse
Ok, after rebooting Windows, I was able to get the USB connection to the phone to work in fastboot. It seems I missed the step described in this thread:
http://forum.xda-developers.com/showthread.php?t=1508556
which states with S-ON you must flash the boot.img separately. I did that via fastboot and the phone boots into cyanogenmod now.
However, I still seem to have the issue with clockwordmod recovery. As long as I do the recovery functions from rom manager, everything is fine, but when I manually boot into the recovery menu, I get the same behavior of any choice from the menu just blanks the screen except for the CWM logo and nothing happens. I tried reflashing the recovery image using fastboot, but still no go.
brucehvn said:
However, I still seem to have the issue with clockwordmod recovery. As long as I do the recovery functions from rom manager, everything is fine, but when I manually boot into the recovery menu, I get the same behavior of any choice from the menu just blanks the screen except for the CWM logo and nothing happens. I tried reflashing the recovery image using fastboot, but still no go.
Click to expand...
Click to collapse
This is solved also. Seems on the MT4GS, the trackball is the selection button. The power button appears to only be a back button.
What a thread! Two nicely phrased problem definitions, two well explained solutions, and all from the same guy. Sorry we weren't able to help directly, but you obviously found the answers you needed elsewhere in the forum. And you updated the title as well to show it was solved. Thanks.